1 # NEWS for rsync 3.2.7 (UNRELEASED)
3 ## Changes in this version:
7 - Fixed the validating of remote filter rules.
9 - When rsync gets an unpack error on an ACL, mention the filename.
11 - Avoid oversetting sanitize_paths when a daemon is serving "/" (even if
12 "use chroot" is false).
16 - Added negotiated daemon-auth support that allows a stronger checksum digest
17 to be used. Added SHA512, SHA256, and SHA1 digests to MD5 & MD4. These new
18 digests are at the highest priority in the new daemon-auth negotiation list.
20 - Added support for SHA1, SHA256, and SHA512 digests in file checksums. While
21 this tends to be overkill, it is available if someone really needs it. These
22 overly-long checksums are at the lowest priority in the normal checksum
25 - Improved the xattr hash table to use a 64-bit key (which should ensure fewer
28 - If the `--version` option is repeated (e.g. `-VV`) then the information is
29 output in a (still human-readable) JSON format (client side only).
31 - The script `support/json-rsync-version` is available to get the JSON style
32 version output from any rsync. The script accepts either text on stdin
33 **or** an arg that specifies an rsync executable to run with a doubled
34 `--version` option. If the text we get isn't already in JSON format, it is
35 converted. Newer rsync versions will provide more complete info than older
38 - The [`use chroot`](rsyncd.conf.5#use_chroot) daemon parameter now defaults to
39 "unset" so that rsync can test if chrooting works and decide to proceed with
40 a sanitized copy if chroot is not supported (e.g., for a non-root daemon).
41 Explicitly setting it to true or false (on or off) behaves the same way as
44 ### PACKAGING RELATED:
46 - The checksum code now uses openssl's EVP methods, which gets rid of various
47 deprecation warnings and makes it easy to support more digest methods. On
48 newer systems, the MD4 digest is marked as legacy in the openssl code, which
49 makes openssl refuse to support it via EVP. You can just ignore this and
50 allow the included MD4 code to be used for older rsync connections (when
51 talking to an rsync prior to 3.0.0) or you can configure rsync to tell
52 openssl to enable legacy algorithms (see below).
54 - A simple openssl config file is supplied that can be installed for rsync to
55 use. If you install packaging/openssl-rsync.cnf to a public spot (such as
56 `/etc/ssl/openssl-rsync.cnf`) and then run configure with the option
57 `--with-openssl-conf=/path/name.cnf`, this will cause rsync to export the
58 configured path in the OPENSSL_CONF environment variable (when the variable
59 is not already set). This will enable openssl's MD4 code for rsync to use.
61 - The packager may wish to include an explicit "use chroot = true" in the top
62 section of the /etc/rsyncd.conf file if the daemon is being installed to run
63 as the root user (though rsync should behave the same even with the value
64 unset, a little extra paranoia doesn't hurt).
66 ------------------------------------------------------------------------------
68 # NEWS for rsync 3.2.6 (9 Sep 2022)
70 ## Changes in this version:
74 - More path-cleaning improvements in the file-list validation code to avoid
75 rejecting of valid args.
77 - A file-list validation fix for a [`--files-from`](rsync.1#opt) file that ends
78 without a line-terminating character.
80 - Added a safety check that prevents the sender from removing destination files
81 when a local copy using [`--remove-source-files`](rsync.1#opt) has some files
82 that are shared between the sending & receiving hierarchies, including the
83 case where the source dir & destination dir are identical.
85 - Fixed a bug in the internal MD4 checksum code that could cause the digest
86 to be sporadically incorrect (the openssl version was/is fine).
88 - A minor tweak to rrsync added "copy-devices" to the list of known args, but
89 left it disabled by default.
93 - Rename `--protect-args` to [`--secluded-args`](rsync.1#opt) to make it
94 clearer how it differs from the default backslash-escaped arg-protecting
95 behavior of rsync. The old option names are still accepted. The
96 environment-variable override did not change its name.
98 ### PACKAGING RELATED:
100 - The configure option `--with-protected-args` was renamed to
101 `--with-secluded-args`. This option makes `--secluded-args` the default
102 rsync behavior instead of using backslash escaping for protecting args.
104 - The mkgitver script now makes sure that a `.git` dir/file is in the top-level
105 source dir before calling `git describe`. It also runs a basic check on the
106 version value. This should avoid using an unrelated git description for
109 ### DEVELOPER RELATED:
111 - The configure script no longer sets the -pedantic-errors CFLAG (which it
112 used to try to do only for gcc).
114 - The name_num_obj struct was modified to allow its dynamic name_num_item list
115 to be initialized in a better way.
117 ------------------------------------------------------------------------------
119 # NEWS for rsync 3.2.5 (14 Aug 2022)
121 ## Changes in this version:
125 - Added some file-list safety checking that helps to ensure that a rogue
126 sending rsync can't add unrequested top-level names and/or include recursive
127 names that should have been excluded by the sender. These extra safety
128 checks only require the receiver rsync to be updated. When dealing with an
129 untrusted sending host, it is safest to copy into a dedicated destination
130 directory for the remote content (i.e. don't copy into a destination
131 directory that contains files that aren't from the remote host unless you
132 trust the remote host). Fixes CVE-2022-29154.
134 - A fix for CVE-2022-37434 in the bundled zlib (buffer overflow issue).
138 - Fixed the handling of filenames specified with backslash-quoted wildcards
139 when the default remote-arg-escaping is enabled.
141 - Fixed the configure check for signed char that was causing a host that
142 defaults to unsigned characters to generate bogus rolling checksums. This
143 made rsync send mostly literal data for a copy instead of finding matching
144 data in the receiver's basis file (for a file that contains high-bit
147 - Lots of manpage improvements, including an attempt to better describe how
148 include/exclude filters work.
150 - If rsync is compiled with an xxhash 0.8 library and then moved to a system
151 with a dynamically linked xxhash 0.7 library, we now detect this and disable
152 the XX3 hashes (since these routines didn't stabilize until 0.8).
156 - The [`--trust-sender`](rsync.1#opt) option was added as a way to bypass the
157 extra file-list safety checking (should that be required).
159 ### PACKAGING RELATED:
161 - A note to those wanting to patch older rsync versions: the changes in this
162 release requires the quoted argument change from 3.2.4. Then, you'll want
163 every single code change from 3.2.5 since there is no fluff in this release.
165 - The build date that goes into the manpages is now based on the developer's
166 release date, not on the build's local-timezone interpretation of the date.
168 ### DEVELOPER RELATED:
170 - Configure now defaults GETGROUPS_T to gid_t when cross compiling.
172 - Configure now looks for the bsd/string.h include file in order to fix the
173 build on a host that has strlcpy() in the main libc but not defined in the
176 ------------------------------------------------------------------------------
178 # NEWS for rsync 3.2.4 (15 Apr 2022)
180 ## Changes in this version:
182 ### BEHAVIOR CHANGES:
184 - A new form of arg protection was added that works similarly to the older
185 `--protect-args` ([`-s`](rsync.1#opt)) option but in a way that avoids
186 breaking things like rrsync (the restricted rsync script): rsync now uses
187 backslash escaping for sending "shell-active" characters to the remote
188 shell. This includes spaces, so fetching a remote file via a simple quoted
189 filename value now works by default without any extra quoting:
192 rsync -aiv host:'a simple file.pdf' .
195 Wildcards are not escaped in filename args, but they are escaped in options
196 like the [`--suffix`](rsync.1#opt) and [`--usermap`](rsync.1#opt) values.
197 If your rsync script depends on the old arg-splitting behavior, either run
198 it with the [`--old-args`](rsync.1#opt) option or `export RSYNC_OLD_ARGS=1`
199 in the script's environment. See also the [ADVANCED USAGE](rsync.1#)
200 section of rsync's manpage for how to use a more modern arg style.
202 - A long-standing bug was preventing rsync from figuring out the current
203 locale's decimal point character, which made rsync always output numbers
204 using the "C" locale. Since this is now fixed in 3.2.4, a script that
205 parses rsync's decimal numbers (e.g. from the verbose footer) may want to
206 setup the environment in a way that the output continues to be in the C
207 locale. For instance, one of the following should work fine:
210 export LC_ALL=C.UTF-8
213 or if iconv translations are needed:
216 if [ "${LC_ALL:-}" ]; then
217 export LANG="$LC_ALL"
218 export LC_CTYPE="$LC_ALL"
221 export LC_NUMERIC=C.UTF-8
226 - A fix for CVE-2018-25032 in the bundled zlib (memory corruption issue).
230 - Fixed a bug with [`--inplace`](rsync.1#opt) + [`--sparse`](rsync.1#opt) (and
231 a lack of [`--whole-file`](rsync.1#opt)) where the destination file could
232 get reconstructed with bogus data. Since the bug can also be avoided by
233 using (the seemingly redundant) [`--no-W`](rsync.1#opt) on the receiving
234 side, the latest rsync will now send `--no-W` to a remote receiver when this
235 option combination occurs. If your client rsync is not new enough to do
236 this for you (or if you're just paranoid), you can manually specify `--no-W
237 -M--no-W` (when not using [`--whole-file`](rsync.1#opt)) to make sure the
240 - Fixed a bug with [`--mkpath`](rsync.1#opt) if a single-file copy specifies
241 an existing destination dir with a non-existing destination filename.
243 - Fixed `--update -vv` to output "is uptodate" instead of "is newer" messages
244 for files that are being skipped due to an identical modify time. (This was
245 a new output quirk in 3.2.3.)
247 - When doing an append transfer, the sending side's file must not get shorter
248 or it is skipped. Fixes a crash that could occur when the size changes to 0
249 in the middle of the send negotiations.
251 - When dealing with special files (see [`--specials`](rsync.1#opt)) in an
252 alt-dest hierarchy, rsync now checks the non-permission mode bits to ensure
253 that the 2 special files are really the same before hard-linking them
256 - Fixed a bug where [`--delay-updates`](rsync.1#opt) with stale partial data
257 could cause a file to fail to update.
259 - Fixed a few places that would output an INFO message with
260 [`--info=NAME`](rsync.1#opt) that should only have been output given
261 [`--verbose`](rsync.1#opt) or [`--itemize-changes`](rsync.1#opt).
263 - Avoid a weird failure if you run a local copy with a (useless)
264 [`--rsh`](rsync.1#opt) option that contains a `V` in the command.
266 - Fixed a long-standing compression bug where the compression level of the
267 first file transferred affected the level for all future files. Also, the
268 per-file compression skipping has apparently never worked, so it is now
269 documented as being ineffective.
271 - Fixed a truncate error when a `--write-devices` copy wrote a file onto a
272 device that was shorter than the device.
274 - Made `--write-devices` support both `--checksum` and `--no-whole-file` when
277 - Improved how the [`--stop-at`](rsync.1#opt), [`--stop-after`](rsync.1#opt),
278 and (the deprecated) [`--time-limit`](rsync.1#opt) options check to see if
279 the allowed time is over, which should make rsync exit more consistently.
281 - Tweak --progress to display "`??:??:??`" when the time-remaining value is so
282 large as to be meaningless.
284 - Silence some chmod warnings about symlinks when it looks like we have a
285 function to set their permissions but they can't really be set.
287 - Fixed a potential issue in git-set-file-times when handling commits with
288 high-bit characters in the description & when handling a description that
289 might mimic the git raw-commit deliniators. (See the support dir.)
291 - The bundled systemd/rsync.service file now includes `Restart=on-failure`.
295 - Use openssl's `-verify_hostname` option in the rsync-ssl script.
297 - Added extra info to the "FILENAME exists" output of
298 [`--ignore-existing`](rsync.1#opt) when [`--info=skip2`](rsync.1#opt) is
299 used. The skip message becomes "FILENAME exists (INFO)" where the INFO is
300 one of "type change", "sum change" (requires [`--checksum`](rsync.1#opt)),
301 "file change" (based on the quick check), "attr change", or "uptodate".
302 Prior versions only supported `--info=skip1`.
304 - Added the [`--fsync`](rsync.1#opt) option (promoted from the patches repo).
306 - Added the [`--copy-devices`](rsync.1#opt) option. Compared to the
307 historical version from the rsync-patches repo, this version: properly
308 handles `--checksum`; fixes a truncation bug when doing an `--inplace` copy
309 onto a longer file; fixes several bugs in the `--itemize` output; and only
310 the sending side needs the enhanced rsync for the copy to work.
312 - Reduced memory usage for an incremental transfer that has a bunch of small
315 - The rsync daemon can now handle a client address with an implied "%scope"
318 - Added support for [`--atimes`](rsync.1#opt) on macOS and fixed a bug where
319 it wouldn't work without [`--times`](rsync.1#opt).
321 - Rsync can now update the xattrs on a read-only file when your user can
322 temporarily add user-write permission to the file. (It always worked for a
325 - Rsync can now work around an [`--inplace`](rsync.1#opt) update of a file
326 that is being refused due to the Linux fs.protected_regular sysctl setting.
328 - When [`--chown`](rsync.1#opt), [`--usermap`](rsync.1#opt), or
329 [`--groupmap`](rsync.1#opt) is specified, rsync now makes sure that the
330 appropriate [`--owner`](rsync.1#opt) and/or [`--group`](rsync.1#opt) options
333 - Added the [`--info=NONREG`](rsync.1#opt) setting to control if rsync should
334 warn about non-regular files in the transfer. This is enabled by default
335 (keeping the behavior the same as before), so specifying `--info=nonreg0`
336 can be used to turn the warnings off.
338 - An optional asm optimization for the rolling checksum from Shark64. Enable
339 it with `./configure --enable-roll-asm`.
341 - Using `--debug=FILTER` now outputs a caution message if a filter rule
342 has trailing whitespace.
344 - Transformed rrsync into a python script with improvements:
345 - Security has been beefed up.
346 - The known rsync options were updated to include recent additions.
347 - Make rrsync reject [`--copy-links`](rsync.1#opt) (`-L`),
348 [`--copy-dirlinks`](rsync.1#opt) (`-k`), &
349 [`--keep-dirlinks`](rsync.1#opt) (`-K`) by default to make it harder to
350 exploit any out-of-subdir symlinks.
351 - A new rrsync option of [`-munge`](rrsync.1#opt) tells rrsync to always
352 enable rsync's [`--munge-links`](rsync.1#opt) option on the server side.
353 - A new rrsync option of [`-no-lock`](rrsync.1#opt) disables a new
354 single-use locking idiom that is the default when [`-ro`](rrsync.1#opt) is
355 not used (useful with [`-munge`](rrsync.1#opt)).
356 - A new rrsync option of [`-no-del`](rrsync.1#opt) disables all `--remove*`
357 and `--delete*` rsync options on the server side.
358 - The log format has been tweaked slightly to add seconds to the timestamp
359 and to output the command executed as a tuple (making the args clearer).
360 - An rrsync.1 manpage was added (in the support dir with rrsync).
362 - Added options to the lsh script to facilitate rrsync testing. (See the
365 - Transformed the atomic-rsync script into a python script and added the
366 ability to ignore one or more non-zero exit codes. By default, it now
367 ignores code 24, the file-vanished exit code. (See the support dir.)
369 - Transformed the munge-symlinks script into python. (See the support dir.)
371 - Improved the rsync-no-vanished script to not join stdout & stderr together.
372 (See the support dir.)
374 - Work around a glibc bug where lchmod() breaks in a chroot w/o /proc mounted.
376 - Try to support a client that sent a remote rsync a wacko stderr file handle
377 (such as an older File::RsyncP perl library used by BackupPC).
379 - Lots of manpage improvements, including better HTML versions.
381 ### PACKAGING RELATED:
383 - Give configure the `--with-rrsync` option if you want `make install` to
384 install the (now python3) rrsync script and its new manpage.
386 - If the rrsync script is installed, its package should be changed to depend
387 on python3 and the (suggested but not mandatory) python3 braceexpand lib.
389 - When creating a package from a non-release version (w/o a git checkout), the
390 packager can elect to create git-version.h and define RSYNC_GITVER to the
391 string they want `--version` to output. (The file is still auto-generated
392 using the output of `git describe` when building inside a non-shallow git
395 - Renamed configure's `--enable-simd` option to `--enable-roll-simd` and added
396 the option `--enable-roll-asm` to use the new asm version of the code. Both
397 are x86_64/amd64 only.
399 - Renamed configure's `--enable-asm` option to `--enable-md5-asm` to avoid
400 confusion with the asm option for the rolling checksum. It is also honored
401 even when openssl crypto is in use. This allows: normal MD4 & MD5, normal
402 MD4 + asm MD5, openssl MD4 & MD5, or openssl MD4 + asm MD5 depending on the
403 configure options selected.
405 - Made SIMD & asm configure checks default to "no" on non-Linux hosts due to
406 various reports of problems on NetBSD & macOS hosts. These were also
407 tweaked to allow enabling the feature on a host_cpu of amd64 (was only
408 allowed on x86_64 before).
410 - Fixed configure to not fail at the SIMD check when cross-compiling.
412 - Improved the IPv6 determination in configure.
414 - Compile the C files with `-pedantic-errors` (when possible) so that we will
415 get warned if a static initialization overflows in the future (among other
418 - When linking with an external zlib, rsync renames its `read_buf()` function
419 to `read_buf_()` to avoid a symbol clash on an unpatched zlib.
421 - Added a SECURITY.md file.
423 ### DEVELOPER RELATED:
425 - Made it easier to write rsync tests that diff the output while also checking
426 the status code, and used the idiom to improve the existing tests. (See the
427 `checkdiff` and `checkdiff2` idioms in the `testsuite/*.test` files.
429 - The packaging scripts & related python lib got some minor enhancements.
433 - Use setenv() instead of putenv() when it is available.
435 - Improve the logic in compat.c so that we don't need to try to remember to
436 sprinkle `!local_server` exceptions throughout the protocol logic.
438 - One more C99 Flexible Array improvement (started in the last release) and
439 make use of the C99 `%zd` format string when printing size_t values (when
442 - Use mallinfo2() instead of mallinfo(), when available.
444 ------------------------------------------------------------------------------
446 # NEWS for rsync 3.2.3 (6 Aug 2020)
448 ## Changes in this version:
452 - Fixed a bug in the xattr code that was freeing the wrong object when trying
453 to cleanup the xattr list.
455 - Fixed a bug in the xattr code that was not leaving room for the "rsync."
456 prefix in some instances where it needed to be added.
458 - Restored the ability to use [`--bwlimit=0`](rsync.1#opt) to specify no
459 bandwidth limit. (It was accidentally broken in 3.2.2.)
461 - Fixed a bug when combining [`--delete-missing-args`](rsync.1#opt) with
462 [`--no-implied-dirs`](rsync.1#opt) & [`-R`](rsync.1#opt) where rsync might
463 create the destination path of a missing arg. The code also avoids some
464 superfluous warnings for nested paths of removed args.
466 - Fixed an issue where hard-linked devices could cause the rdev_major value to
467 get out of sync between the sender and the receiver, which could cause a
468 device to get created with the wrong major value in its major,minor pair.
470 - Rsync now complains about a missing [`--temp-dir`](rsync.1#opt) before
471 starting any file transfers.
473 - A completely empty source arg is now a fatal error. This doesn't change
474 the handling of implied dot-dir args such as "localhost:" and such.
478 - Allow [`--max-alloc=0`](rsync.1#opt) to specify no limit to the alloc sanity
481 - Allow [`--block-size=SIZE`](rsync.1#opt) to specify the size using units
484 - The name of the id-0 user & group are now sent to the receiver along with
485 the other user/group names in the transfer (instead of assuming that both
486 sides have the same id-0 names).
488 - Added the [`--stop-after`](rsync.1#opt) and [`--stop-at`](rsync.1#opt)
489 options (with a [`--time-limit`](rsync.1#opt) alias for `--stop-after`).
490 This is an enhanced version of the time-limit patch from the patches repo.
492 - Added the [`name converter`](rsyncd.conf.5#opt) daemon parameter to make it
493 easier to convert user & group names inside a chrooted daemon module. This
494 is based on the nameconverter patch with some improvements, including a
495 tweak to the request protocol (so if you used this patch in the past, be
496 sure to update your converter script to use newlines instead of null chars).
498 - Added [`--crtimes`](rsync.1#opt) (`-N`) option for preserving the file's
499 create time (I believe that this is macOS only at the moment).
501 - Added [`--mkpath`](rsync.1#opt) option to tell rsync that it should create a
502 non-existing path component of the destination arg.
504 - Added [`--stderr=errors|all|client`](rsync.1#opt) to replace the
505 `--msgs2stderr` and `--no-msgs2stderr` options (which are still accepted).
506 The default use of stderr was changed to be `--stderr=errors` where all the
507 processes that have stderr available output directly to stderr, which should
508 help error messages get to the user more quickly, especially when doing a
509 push (which includes local copying). This also allows rsync to exit quickly
510 when a receiver failure occurs, since rsync doesn't need to try to keep the
511 connection alive long enough for the fatal error to go from the receiver to
512 the generator to the sender. The old default can be requested via
513 `--stderr=client`. Also changed is that a non-default stderr mode is
514 conveyed to the remote rsync (using the older option names) instead of
515 requiring the user to use [`--remote-option`](rsync.1#opt) (`-M`) to tell
516 the remote rsync what to do.
518 - Added the ability to specify "@netgroup" names to the [`hosts
519 allow`](rsyncd.conf.5#opt) and [`hosts deny`](rsyncd.conf.5#opt) daemon
520 parameters. This is a finalized version of the netgroup-auth patch from the
523 - Rsync can now hard-link symlinks on FreeBSD due to it making use of the
524 linkat() function when it is available.
526 - Output file+line info on out-of-memory & overflow errors while also avoiding
527 the output of alternate build-dir path info that is not useful to the user.
529 - Change configure to know that Cygwin supports Linux xattrs.
531 - Improved the testsuite on FreeBSD & Cygwin.
533 - Added some compatibility code for HPE NonStop platforms.
535 - Improved the INSTALL.md info.
537 - Added a few more suffixes to the default skip-compress list.
539 - Improved configure's error handling to notify about several issues at once
540 instead of one by one (for the newest optional features).
544 - Use a simpler overflow check idiom in a few spots.
546 - Use a C99 Flexible Array for a trailing variable-size filename in a struct
547 (with a fallback to the old 1-char string kluge for older compilers).
549 ------------------------------------------------------------------------------
551 # NEWS for rsync 3.2.2 (4 Jul 2020)
553 ## Changes in this version:
557 - Avoid a crash when a daemon module enables `transfer logging` without
558 setting a `log format` value.
560 - Fixed installing rsync-ssl script from an alternate build dir.
562 - Fixed the updating of configure.sh from an alternate build dir.
564 - Apple requires the asm function name to begin with an underscore.
566 - Avoid a test failure in the daemon test when `--atimes` is disabled.
570 - Allow the server side to restrict checksum & compression choices via the
571 same environment variables the client uses. The env vars can be divided
572 into "client list & server list" by the "`&`" char or the same list can
575 - Simplify how the negotiation environment variables apply when interacting
576 with an older rsync and also when a list contains only invalid names.
578 - Do not allow a negotiated checksum or compression choice of "none" unless
579 the user authorized it via an environment variable or command-line option.
581 - Added the `--max-alloc=SIZE` option to be able to override the memory
582 allocator's sanity-check limit. It defaults to 1G (as before) but the error
583 message when exceeding it specifically mentions the new option so that you
584 can differentiate an out-of-memory error from a failure of this limit. It
585 also allows you to specify the value via the RSYNC_MAX_ALLOC environment
588 - Add the "open atime" daemon parameter to allow a daemon to always enable or
589 disable the use of O_NOATIME (the default is to let the user control it).
591 - The default systemd config was changed to remove the `ProtectHome=on`
592 setting since rsync is often used to serve files in /home and /root and this
593 seemed a bit too strict. Feel free to use `systemctl edit rsync` to add
594 that restriction (or maybe `ProtectHome=read-only`), if you like. See the
595 3.2.0 NEWS for the other restrictions that were added compared to 3.1.3.
597 - The memory allocation functions now automatically check for a failure and
598 die when out of memory. This eliminated some caller-side check-and-die
599 code and added some missing sanity-checking of allocations.
601 - Put optimizations into their own list in the `--version` output.
603 - Improved the manpage a bit more.
605 ### PACKAGING RELATED:
607 - Prepared the checksum code for an upcoming xxHash release that provides new
608 XXH3 (64-bit) & XXH128 (128-bit) checksum routines. These will not be
609 compiled into rsync until the xxhash v0.8.0 include files are installed on
610 the build host, and that release is a few weeks away at the time this was
611 written. So, if it's now the future and you have packaged and installed
612 xxhash-0.8.0-devel, a fresh rebuild of rsync 3.2.2 will give you the new
613 checksum routines. Just make sure that the new rsync package depends on
616 ### DEVELOPER RELATED:
618 - Moved the version number out of configure.ac into its own version.h file so
619 that we don't need to reconfigure just because the version number changes.
621 - Moved the daemon parameter list into daemon-parm.txt so that an awk script
622 can create the interrelated structs and accessors that loadparm.c needs.
624 ------------------------------------------------------------------------------
626 # NEWS for rsync 3.2.1 (22 Jun 2020)
628 ## Changes in this version:
632 - Fixed a potential build issue with the MD5 assembly-language code by
633 removing some non-portable directives.
635 - Use the preprocessor with the asm file to ensure that if the code is
636 unneeded, it doesn't get built.
638 - Avoid the stack getting set to executable when including the asm code.
640 - Some improvements in the SIMD configure testing to try to avoid build
641 issues, such as avoiding a clang++ core dump when `-g` is combined with
642 `-O2`. Note that clang++ is quite buggy in this area, and it does still
643 crash for some folks, so just use `--disable-simd` if you need to avoid
644 their buggy compiler (since the configure test is apparently not finding
645 all the compilers that will to crash and burn).
647 - Fixed an issue in the md2man script when building from an alternate dir.
649 - Disable `--atimes` on macOS (it apparently just ignores the atime change).
653 - The use of `--backup-dir=STR` now implies `--backup`.
655 - Added `--zl=NUM` as a short-hand for `--compress-level=NUM`.
657 - Added `--early-input=FILE` option that allows the client to send some
658 data to a daemon's (optional) "early exec" script on its stdin.
660 - Mention atimes in the capabilities list that `--version` outputs.
662 - Mention either "default protect-args" or "optional protect-args" in the
663 `--version` capabilities depending on how rsync was configured.
665 - Some info on optimizations is now elided from the `--version` capabilities
666 since they aren't really user-facing capabilities. You can still see the
667 info (plus the status of a couple extra optimizations) by repeating the
668 `--version` option (e.g. `-VV`).
670 - Updated various URLs to be https instead of http.
672 - Some documentation improvements.
674 ### PACKAGING RELATED:
676 - If you had to use `--disable-simd` for 3.2.0, you might want to try removing
677 that and see if it will succeed or auto-disable. Some buggy clang++
678 compilers are still not auto disabled, though.
680 - The MD5 asm code is now under its own configure flag (not shared with the
681 SIMD setting), so if you have any issues compiling it, re-run configure with
684 - Merged the OLDNEWS.md file into NEWS.md.
686 ------------------------------------------------------------------------------
688 # NEWS for rsync 3.2.0 (19 Jun 2020)
690 ## Changes in this version:
694 - Avoid a potential out-of-bounds read in daemon mode if argc can be made to
697 - Fix the default list of skip-compress files for non-daemon transfers.
699 - Fix xattr filter rules losing an 'x' attribute in a non-local transfer.
701 - Avoid an error when a check for a potential fuzzy file happens to reference
704 - Make the atomic-rsync helper script have a more consistent error-exit.
706 - Make sure that a signal handler's use of exit_cleanup() calls `_exit()`
709 - Various zlib fixes, including security fixes for CVE-2016-9843,
710 CVE-2016-9842, CVE-2016-9841, and CVE-2016-9840.
712 - Fixed an issue with `--remove-source-files` not removing a source symlink
713 when combined with `--copy-links`.
715 - Fixed a bug where the daemon would fail to write early fatal error messages
716 to the client, such as refused or unknown command-line options.
718 - Fixed the block-size validation logic when dealing with older protocols.
720 - Some rrsync fixes and enhancements to handle the latest options.
722 - Fixed a problem with the `--link-dest`|`--copy-dest` code when `--xattrs`
723 was specified along with multiple alternate-destination directories (it
724 could possibly choose a bad file match while trying to find a better xattr
727 - Fixed a couple bugs in the handling of files with the `--sparse` option.
729 - Fixed a bug in the writing of the batch.sh file (w/`--write-batch`) when the
730 source & destination args were not last on the command-line.
732 - Avoid a hang when an overabundance of messages clogs up all the I/O buffers.
734 - Fixed a mismatch in the RSYNC_PID values put into the environment of
735 `pre-xfer exec` and a `post-xfer exec`.
737 - Fixed a crash in the `--iconv` code.
739 - Fixed a rare crash in the popt_unalias() code.
743 - The default systemd config was made stricter by default. For instance,
744 `ProtectHome=on` (which hides content in /root and /home/USER dirs),
745 `ProtectSystem=full` (which makes /usr, /boot, & /etc dirs read-only), and
746 `PrivateDevices=on` (which hides devices). You can override any of these
747 using the standard `systemctl edit rsync` and add one or more directives
748 under a `[Service]` heading (and restart the rsync service).
750 - Various checksum enhancements, including the optional use of openssl's MD4 &
751 MD5 checksum algorithms, some x86-64 optimizations for the rolling checksum,
752 some x86-64 optimizations for the (non-openssl) MD5 checksum, the addition
753 of xxHash checksum support, and a negotiation heuristic that ensures that it
754 is easier to add new checksum algorithms in the future. The environment
755 variable `RSYNC_CHECKSUM_LIST` can be used to customize the preference order
756 of the negotiation, or use `--checksum-choice` (`--cc`) to force a choice.
758 - Various compression enhancements, including the addition of zstd and lz4
759 compression algorithms and a negotiation heuristic that picks the best
760 compression option supported by both sides. The environment variable
761 `RSYNC_COMPRESS_LIST` can be used to customize the preference order of the
762 negotiation, or use `--compress-choice` (`--zc`) to force a choice.
764 - Added a `--debug=NSTR` option that outputs details of the new negotiation
765 strings (for checksums and compression). The first level just outputs the
766 result of each negotiation on the client, level 2 outputs the values of the
767 strings that were sent to and received from the server, and level 3 outputs
768 all those values on the server side too (when the server was given the debug
771 - The `--debug=OPTS` command-line option is no longer auto-forwarded to the
772 remote rsync which allows for the client and server to have different levels
773 of debug specified. This also allows for newer debug options to be
774 specified, such as using `--debug=NSTR` to see the negotiated hash result,
775 without having the command fail if the server version is too old to handle
776 that debug item. Use `-M--debug=OPTS` to send the options to the remote side.
778 - Added the `--atimes` option based on the long-standing patch (just with some
779 fixes that the patch has been needing).
781 - Added `--open-noatime` option to open files using `O_NOATIME`.
783 - Added the `--write-devices` option based on the long-standing patch.
785 - Added openssl & preliminary gnutls support to the rsync-ssl script, which is
786 now installed by default. This was unified with the old stunnel-rsync
787 helper script to simplify packaging. Note that the script accepts the use
788 of `--type=gnutls` for gnutls testing, but does not look for gnutls-cli on
789 the path yet. The use of `--type=gnutls` will not work right until
790 gnutls-cli no longer drops data.
792 - Rsync was enhanced to set the `RSYNC_PORT` environment variable when running
793 a daemon-over-rsh script. Its value is the user-specified port number (set
794 via `--port` or an rsync:// URL) or 0 if the user didn't override the port.
796 - Added the `proxy protocol` daemon parameter that allows your rsyncd to know
797 the real remote IP when it is setup behind a proxy.
799 - Added negated matching to the daemon's `refuse options` setting by using
800 match strings that start with a `!` (such as `!compress*`). This lets you
801 refuse all options except for a particular approved list, for example. It
802 also lets rsync refuse certain options by default (such as `write-devices`)
803 while allowing the config to override that, as desired.
805 - Added the `early exec` daemon parameter that runs a script before the
806 transfer parameters are known, allowing some early setup based on module
809 - Added status output in response to a signal (via both SIGINFO & SIGVTALRM).
811 - Added `--copy-as=USER` option to give some extra security to root-run rsync
812 commands into/from untrusted directories (such as backups and restores).
814 - When resuming the transfer of a file in the `--partial-dir`, rsync will now
815 update that partial file in-place instead of creating yet another tmp file
816 copy. This requires both sender & receiver to be at least v3.2.0.
818 - Added support for `RSYNC_SHELL` & `RSYNC_NO_XFER_EXEC` environment variables
819 that affect the early, pre-xfer, and post-xfer exec rsync daemon parameters.
821 - Optimize the `--fuzzy --fuzzy` heuristic to avoid the fuzzy directory scan
822 until all other basis-file options are exhausted (such as `--link-dest`).
824 - Have the daemon log include the normal-exit sent/received stats when the
825 transfer exited with an error when possible (i.e. if it is the sender).
827 - The daemon now locks its pid file (when configured to use one) so that it
828 will not fail to start when the file exists but no daemon is running.
830 - Various manpage improvements, including some html representations (that
831 aren't installed by default).
833 - Made `-V` the short option for `--version` and improved its information.
835 - Pass the `-4` or `-6` option to the ssh command, making it easier to type
836 than `--rsh='ssh -4'` (or the `-6` equivalent).
838 - Added example config for rsyncd SSL proxy configs to rsyncd.conf.
840 - More errors messages now mention if the error is coming from the sender or
843 ### PACKAGING RELATED:
845 - Add installed bash script: /usr/bin/rsync-ssl
847 - Add installed manpage: /usr/man/man1/rsync-ssl.1
849 - Tweak auxiliary doc file names, such as: README.md, INSTALL.md, & NEWS.md.
851 - The rsync-ssl script wants to run openssl or stunnel4, so consider adding a
852 dependency for one of those options (though it's probably fine to just let
853 it complain about being unable to find the program and let the user decide
854 if they want to install one or the other).
856 - If you packaged rsync + rsync-ssl + rsync-ssl-daemon as separate packages,
857 the rsync-ssl package is now gone (rsync-ssl should be considered to be
858 mainstream now that Samba requires SSL for its rsync daemon).
860 - Add _build_ dependency for liblz4-dev, libxxhash-dev, libzstd-dev, and
861 libssl-dev. These development libraries will give rsync extra compression
862 algorithms, extra checksum algorithms, and allow use of openssl's crypto
863 lib for (potentially) faster MD4/MD5 checksums.
865 - Add _build_ dependency for g++ or clang++ on x86_64 systems to enable the
866 SIMD checksum optimizations.
868 - Add _build_ dependency for _either_ python3-cmarkcfm or python3-commonmark
869 to allow for patching of manpages or building a git release. This is not
870 required for a release-tar build, since it comes with pre-built manpages.
871 Note that cmarkcfm is faster than commonmark, but they generate the same
872 data. The commonmark dependency is easiest to install since it's native
873 python, and can even be installed via `pip3 install --user commonmark` if
874 you want to just install it for the build user.
876 - Remove yodl _build_ dependency (if it was even listed before).
878 ### DEVELOPER RELATED:
880 - Silenced some annoying warnings about major() & minor() by improving an
881 autoconf include-file check.
883 - Converted the manpages from yodl to markdown. They are now processed via a
884 simple python3 script using the cmarkgfm **or** commonmark library. This
885 should make it easier to package rsync, since yodl is rather obscure.
887 - Improved some configure checks to work better with strict C99 compilers.
889 - Some perl building/packaging scripts were recoded into awk and python3.
891 - Some defines in byteorder.h were changed into static inline functions that
892 will help to ensure that the args don't get evaluated multiple times on
893 "careful alignment" hosts.
895 - Some code typos were fixed (as pointed out by a Fossies run).
897 ------------------------------------------------------------------------------
899 # NEWS for rsync 3.1.3 (28 Jan 2018)
901 ## Changes in this version:
905 - Fixed a buffer overrun in the protocol's handling of xattr names and ensure
906 that the received name is null terminated.
908 - Fix an issue with `--protect-args` where the user could specify the arg in the
909 protected-arg list and short-circuit some of the arg-sanitizing code.
913 - Don't output about a new backup dir without appropriate info verbosity.
915 - Fixed some issues with the sort functions in the rsyncstats script (in the
918 - Added a way to specify daemon config lists (e.g. users, groups, etc) that
919 contain spaces (see `auth users` in the latest rsyncd.conf manpage).
921 - If a backup fails (e.g. full disk) rsync exits with an error.
923 - Fixed a problem with a doubled `--fuzzy` option combined with `--link-dest`.
925 - Avoid invalid output in the summary if either the start or end time had an
928 - We don't allow a popt alias to affect the `--daemon` or `--server` options.
930 - Fix daemon exclude code to disallow attribute changes in addition to
931 disallowing transfers.
933 - Don't force nanoseconds to match if a non-transferred, non-checksummed file
934 only passed the quick-check w/o comparing nanoseconds.
938 - Added the ability for rsync to compare nanosecond times in its file-check
939 comparisons, and added support nanosecond times on Mac OS X.
941 - Added a short-option (`-@`) for `--modify-window`.
943 - Added the `--checksum-choice=NAME[,NAME]` option to choose the checksum
946 - Added hashing of xattr names (with using `-X`) to improve the handling of
947 files with large numbers of xattrs.
949 - Added a way to filter xattr names using include/exclude/filter rules (see
950 the `--xattrs` option in the manpage for details).
952 - Added `daemon chroot|uid|gid` to the daemon config (in addition to the old
953 chroot|uid|gid settings that affect the daemon's transfer process).
955 - Added `syslog tag` to the daemon configuration.
957 - Some manpage improvements.
959 ### DEVELOPER RELATED:
961 - Tweak the `make` output when yodl isn't around to create the manpages.
963 - Changed an obsolete autoconf compile macro.
965 - Support newer yodl versions when converting manpages.
967 ------------------------------------------------------------------------------
969 # NEWS for rsync 3.1.2 (21 Dec 2015)
971 ## Changes in this version:
975 - Make sure that all transferred files use only path names from inside the
976 transfer. This makes it impossible for a malicious sender to try to make the
977 receiver use an unsafe destination path for a transferred file, such as a
982 - Change the checksum seed order in the per-block checksums. This prevents
983 someone from trying to create checksum blocks that match in sum but not
986 - Fixed a with the per-dir filter files (using `-FF`) that could trigger an
989 - Only skip `set_modtime()` on a transferred file if the time is exactly
992 - Don't create an empty backup dir for a transferred file that doesn't exist
995 - Fixed a bug where `--link-dest` and `--xattrs` could cause rsync to exit if
996 a filename had a matching dir of the same name in the alt-dest area.
998 - Allow more than 32 group IDs per user in the daemon's gid=LIST config.
1000 - Fix the logging of %b & %c via `--log-file` (daemon logging was already
1001 correct, as was `--out-format='%b/%c'`).
1003 - Fix erroneous acceptance of `--info=5` & `--debug=5` (an empty flag name is
1008 - Added `(DRY RUN)` info to the `--debug=exit` output line.
1010 - Use usleep() for our msleep() function if it is available.
1012 - Added a few extra long-option names to rrsync script, which will make
1015 - Made configure choose to use Linux xattrs on NetBSD (rather than not
1018 - Added `-wo` (write-only) option to rrsync support script.
1020 - Misc. manpage tweaks.
1022 ### DEVELOPER RELATED:
1024 - Fixed a bug with the Makefile's use of `INSTALL_STRIP`.
1026 - Improve a test in the suite that could get an erroneous timestamp error.
1028 - Tweaks for newer versions of git in the packaging tools.
1030 - Improved the m4 generation rules and some autoconf idioms.
1032 ------------------------------------------------------------------------------
1034 # NEWS for rsync 3.1.1 (22 Jun 2014)
1036 ## Changes in this version:
1040 - If the receiver gets bogus filenames from the sender (an unexpected leading
1041 slash or a `..` infix dir), exit with an error. This prevents a malicious
1042 sender from trying to inject filenames that would affect an area outside the
1043 destination directories.
1045 - Fixed a failure to remove the partial-transfer temp file when interrupted
1046 (and rsync is not saving the partial files).
1048 - Changed the chown/group/xattr-set order to avoid losing some security-
1049 related xattr info (that would get cleared by a chown).
1051 - Fixed a bug in the xattr-finding code that could make a non-root-run
1052 receiver not able to find some xattr numbers.
1054 - Fixed a bug in the early daemon protocol where a timeout failed to be
1055 honored (e.g. if the remote side fails to send us the initial protocol
1058 - Fixed unintended inclusion of commas in file numbers in the daemon log.
1060 - We once again send the 'f' sub-flag (of `-e`) to the server side so it knows
1061 that we can handle incremental-recursion directory errors properly in older
1064 - Fixed an issue with too-aggressive keep-alive messages causing a problem for
1065 older rsync versions early in the transfer.
1067 - Fixed an incorrect message about backup-directory-creation when using
1068 `--dry-run` and the backup dir is not an absolute path.
1070 - Fixed a bug where a failed deletion and/or a failed sender-side removal
1071 would not affect the exit code.
1073 - Fixed a bug that caused a failure when combining `--delete-missing-args`
1074 with `--xattrs` and/or `--acls`.
1076 - Fixed a strange `dir_depth` assertion error that was caused by empty-dir
1077 removals and/or duplicate files in the transfer.
1079 - Fixed a problem with `--info=progress2`'s output stats where rsync would
1080 only update the stats at the end of each file's transfer. It now uses the
1081 data that is flowing for the current file, making the stats more accurate
1084 - Fixed an itemize bug that affected the combo of `--link-dest`, `-X`, and
1087 - Fixed a problem with delete messages not appearing in the log file when the
1088 user didn't use `--verbose`.
1090 - Improve chunked xattr reading for OS X.
1092 - Removed an attempted hard-link xattr optimization that was causing a
1093 transfer failure. This removal is flagged in the compatibility code, so if a
1094 better fix can be discovered, we have a way to flip it on again.
1096 - Fixed a bug when the receiver is not configured to be able to hard link
1097 symlimks/devices/special-file items but the sender sent some of these items
1098 flagged as hard-linked.
1100 - We now generate a better error if the buffer overflows in `do_mknod()`.
1102 - Fixed a problem reading more than 16 ACLs on some OSes.
1104 - Fixed the reading of the secrets file to avoid an infinite wait when the
1105 username is missing.
1107 - Fixed a parsing problem in the `--usermap`/`--groupmap` options when using
1110 - Switched Cygwin back to using socketpair `pipes` to try to speed it up.
1112 - Added knowledge of a few new options to rrsync.
1116 - Tweaked the temp-file naming when `--temp-dir=DIR` is used: the temp-file
1117 names will not get a '.' prepended.
1119 - Added support for a new-compression idiom that does not compress all the
1120 matching data in a transfer. This can help rsync to use less cpu when a
1121 transfer has a lot of matching data, and also makes rsync compatible with a
1122 non-bundled zlib. See the `--new-compress` and `--old-compress` options in
1125 - Added the rsync-no-vanished shell script. (See the support dir.)
1127 - Made configure more prominently mention when we failed to find yodl (in case
1128 the user wants to be able to generate manpages from `*.yo` files).
1130 - Have manpage mention how a daemon's max-verbosity setting affects info and
1131 debug options. Also added more clarification on backslash removals for
1132 excludes that contain wildcards.
1134 - Have configure check if for the attr lib (for getxattr) for those systems
1135 that need to link against it explicitly.
1137 - Change the early dir-creation logic to only use that idiom in an
1138 inc-recursive copy that is preserving directory times. e.g. using
1139 `--omit-dir-times` will avoid these early directories being created.
1141 - Fix a bug in `cmp_time()` that would return a wrong result if the 2 times
1142 differed by an amount greater than what a `time_t` can hold.
1144 ### DEVELOPER RELATED:
1146 - We now include an example systemd file (in packaging/systemd).
1148 - Tweaked configure to make sure that any intended use of the included popt
1149 and/or zlib code is put early in the CFLAGS.
1151 ------------------------------------------------------------------------------
1153 # NEWS for rsync 3.1.0 (28 Sep 2013)
1155 ## Changes in this version:
1157 ### PROTOCOL NUMBER:
1159 - The protocol number was changed to 31.
1163 - Output numbers in 3-digit groups by default (e.g. 1,234,567). See the
1164 `--human-readable` option for a way to turn it off. See also the daemon's
1165 `log format` parameter and related command-line options (including
1166 `--out-format`) for a modifier that can be used to request digit-grouping or
1167 human-readable output in log escapes. (Note that log output is unchanged by
1170 - The `--list-only` option is now affected by the `--human-readable` setting.
1171 It will display digit groupings by default, and unit suffixes if higher
1172 levels of readability are requested. Also, the column width for the size
1173 output has increased from 11 to 14 characters when human readability is
1174 enabled. Use `--no-h` to get the old-style output and column size.
1176 - The output of the `--progress` option has changed: the string `xfer` was
1177 shortened to `xfr`, and the string `to-check` was shortened to `to-chk`,
1178 both designed to make room for the (by default) wider display of file size
1179 numbers without making the total line-length longer. Also, when incremental
1180 recursion is enabled, the string `ir-chk` will be used instead of `to-chk`
1181 up until the incremental-recursion scan is done, letting you know that the
1182 value to check and the total value will still be increasing as new files are
1185 - Enhanced the `--stats` output: 1) to mention how many files were created
1186 (protocol >= 28), 2) to mention how many files were deleted (a new line for
1187 protocol 31, but only output when `--delete` is in effect), and 3) to follow
1188 the file-count, created-count, and deleted-count with a subcount list that
1189 shows the counts by type. The wording of the transferred count has also
1190 changed so that it is clearer that it is only a count of regular files.
1194 - Fixed a bug in the iconv code when EINVAL or EILSEQ is returned with a full
1197 - Fixed some rare bugs in `--iconv` processing that might cause a multi-byte
1198 character to get translated incorrectly.
1200 - Fixed a bogus `vanished file` error if some files were specified with `./`
1201 prefixes and others were not.
1203 - Fixed a bug in `--sparse` where an extra gap could get inserted after a
1206 - Changed the way `--progress` overwrites its prior output in order to make it
1207 nearly impossible for the progress to get overwritten by an error.
1209 - Improved the propagation of abnormal-exit error messages. This should help
1210 the client side to receive errors from the server when it is exiting
1211 abnormally, and should also avoid dying with an `connection unexpectedly
1212 closed` exit when the closed connection is really expected.
1214 - The sender now checks each file it plans to remove to ensure that it hasn't
1215 changed from the first stat's info. This helps to avoid losing file data
1216 when the user is not using the option in a safe manner.
1218 - Fixed a data-duplication bug in the compress option that made compression
1219 less efficient. This improves protocol 31 onward, while behaving in a
1220 compatible (buggy) manner with older rsync protocols.
1222 - When creating a temp-file, rsync is now a bit smarter about it dot-char
1223 choices, which can fix a problem on OS X with names that start with `..`.
1225 - Rsync now sets a cleanup flag for `--inplace` and `--append` transfers that
1226 will flush the write buffer if the transfer aborts. This ensures that more
1227 received data gets written out to the disk on an aborted transfer (which is
1228 quite helpful on a slow, flaky connection).
1230 - The reads that `map_ptr()` now does are aligned on 1K boundaries. This helps
1231 some filesystems and/or files that don't like unaligned reads.
1233 - Fix an issue in the msleep() function if time jumps backwards.
1235 - Fix daemon-server module-name splitting bug where an arg would get split
1236 even if `--protect-args` was used.
1240 - Added the `--remote-option=OPT` (`-M OPT`) command-line option that is
1241 useful for things like sending a remote `--log-file=FILE` or `--fake-super`
1244 - Added the `--info=FLAGS` and `--debug=FLAGS` options to allow finer-grained
1245 control over what is output. Added an extra type of `--progress` output
1246 using `--info=progress2`.
1248 - The `--msgs2stderr` option can help with debugging rsync by allowing the
1249 debug messages to get output to stderr rather than travel via the socket
1252 - Added the `--delete-missing-args` and `--ignore-missing-args` options to
1253 either delete or ignore user-specified files on the receiver that are
1254 missing on the sender (normally the absence of user-specified files
1255 generates an error).
1257 - Added a `T` (terabyte) category to the `--human-readable` size suffixes.
1259 - Added the `--usermap`/`--groupmap`/`--chown` options for manipulating file
1260 ownership during the copy.
1262 - Added the `%C` escape to the log-output handling, which will output the MD5
1263 checksum of any transferred file, or all files if `--checksum` was specified
1264 (when protocol 30 or above is in effect).
1266 - Added the `reverse lookup` parameter to the rsync daemon config file to
1267 allow reverse-DNS lookups to be disabled.
1269 - Added a forward-DNS lookup for the daemon's hosts allow/deny config. Can be
1270 disabled via `forward lookup` parameter (defaults to enabled).
1272 - Added a way for more than one group to be specified in the daemon's config
1273 file, including a way to specify that you want all of the specified user's
1274 groups without having to name them. Also changed the daemon to complain
1275 about an inability to set explicitly-specified uid/gid values, even when not
1276 run by a super-user.
1278 - The daemon now tries to send the user the error messages from the pre-xfer
1279 exec script when it fails.
1281 - Improved the use of alt-dest options into an existing hierarchy of files: If
1282 a match is found in an alt-dir, it takes precedence over an existing file.
1283 (We'll need to wait for a future version before attribute-changes on
1284 otherwise unchanged files are safe when using an existing hierarchy.)
1286 - Added per-user authorization options and group-authorization support to the
1287 daemon's `auth users` parameter.
1289 - Added a way to reference environment variables in a daemon's config file
1290 (using %VAR% references).
1292 - When replacing a non-dir with a symlink/hard-link/device/special-file, the
1293 update should now be done in an atomic manner.
1295 - Avoid re-sending xattr info for hard-linked files w/the same xattrs
1298 - The backup code was improved to use better logic maintaining the backup
1299 directory hierarchy. Also, when a file is being backed up, rsync tries to
1300 hard-link it into place so that the upcoming replacement of the destination
1301 file will be atomic (for the normal, non-inplace logic).
1303 - Added the ability to synchronize nanosecond modified times.
1305 - Added a few more default suffixes for the `dont compress` settings.
1307 - Added the checking of the `RSYNC_PROTECT_ARGS` environment variable to allow
1308 the default for the `--protect-args` command-line option to be overridden.
1310 - Added the `--preallocate` command-line option.
1312 - Allow `--password-file=-` to read the password from stdin (filename `-`).
1314 - Rsync now comes packaged with an rsync-ssl helper script that can be used to
1315 contact a remote rsync daemon using a piped-stunnel command. It also
1316 includes an stunnel config file to run the server side to support ssl daemon
1317 connections. See the packaging/lsb/rsync.spec file for one way to package
1318 the resulting files. (Suggestions for how to make this even easier to
1319 install & use are welcomed.)
1321 - Improved the speed of some `--inplace` updates when there are lots of
1322 identical checksum blocks that end up being unusable.
1324 - Added the `--outbuf=N|L|B` option for choosing the output buffering.
1326 - Repeating the `--fuzzy` option now causes the code to look for fuzzy matches
1327 inside alt-dest directories too.
1329 - The `--chmod` option now supports numeric modes, e.g. `--chmod=644,D755`
1331 - Added some Solaris xattr code.
1333 - Made an rsync daemon (the listening process) exit with a 0 status when it
1334 was signaled to die. This helps launchd.
1336 - Improved the `RSYNC_*` environment variables for the pre-xfer exec script:
1337 when a daemon is sent multiple request args, they are now joined into a
1338 single return value (separated by spaces) so that the `RSYNC_REQUEST`
1339 environment variable is accurate for any `pre-xfer exec`. The values in
1340 `RSYNC_ARG#` vars are no longer truncated at the `.` arg (prior to the
1341 request dirs/files), so that all the requested values are also listed
1342 (separately) in `RSYNC_ARG#` variables.
1346 - Added an `instant-rsyncd` script to the support directory, which makes it
1347 easy to configure a simple rsync daemon in the current directory.
1349 - Added the `mapfrom` and `mapto` scripts to the support directory, which
1350 makes it easier to do user/group mapping in a local transfer based on
1351 passwd/group files from another machine.
1353 - There's a new, improved version of the lsh script in the support dir: it's
1354 written in perl and supports `-u` without resorting to using sudo (when run
1355 as root). The old shell version is now named lsh.sh.
1357 - There is a helper script named rsync-slash-strip in the support directory
1358 for anyone that wants to change the way rsync handles args with trailing
1359 slashes. (e.g. arg/ would get stripped to arg while arg/. would turn into
1364 - The I/O code was rewritten to be simpler and do bigger buffered reads over
1365 the socket. The I/O between the receiver and the generator was changed to be
1366 standard multiplexed-I/O (like that over the socket).
1368 - The sender tries to use any dead time while the generator is looking for
1369 files to transfer in order to do sender-side directory scanning in a more
1372 - A daemon can now inform a client about a daemon-configured timeout value so
1373 that the client can assist in the keep-alive activity (protocol 31).
1375 - The filter code received some refactoring to make it more extendable, to
1376 read better, and do better sanity checking.
1378 - Really big numbers are now output using our own big-num routine rather than
1379 casting them to a double and using a %.0f conversion.
1381 - The `pool_alloc` library has received some minor improvements in alignment
1384 - Added `init_stat_x()` function to avoid duplication of acl/xattr init code.
1386 - The included zlib was upgraded from 1.2.3 to 1.2.8.
1388 - Rsync can now be compiled to use an unmodified zlib library instead of the
1389 tweaked one that is included with rsync. This will eventually become the
1390 default, at which point we'll start the countdown to removing the included
1391 zlib. Until then, feel free to configure using:
1393 ./configure `--with-included-zlib=no`
1395 ### DEVELOPER RELATED:
1397 - Added more conditional debug output.
1399 - Fixed some build issues for Android and Minix.
1401 ------------------------------------------------------------------------------
1403 # NEWS for rsync 3.0.9 (23 Sep 2011)
1405 ## Changes in this version:
1409 - Fix a crash bug in checksum scanning when `--inplace` is used.
1411 - Fix a hang if a hard-linked file cannot be opened by the sender (e.g. if it
1412 has no read permission).
1414 - Fix preservation of a symlink's system xattrs (e.g. selinux) on Linux.
1416 - Fix a memory leak in the xattr code.
1418 - Fixed a bug with `--delete-excluded` when a filter merge file has a rule
1419 that specifies a receiver-only side restriction.
1421 - Fix a bug with the modifying of unwritable directories.
1423 - Fix `--fake-super`'s interaction with `--link-dest` same-file comparisons.
1425 - Fix the updating of the `curr_dir` buffer to avoid a duplicate slash.
1427 - Fix the directory permissions on an implied dot-dir when using `--relative`
1428 (e.g. /outside/path/././send/path).
1430 - Fixed some too-long sleeping instances when using `--bwlimit`.
1432 - Fixed when symlink ownership difference-checking gets compiled into
1433 `unchanged_attrs()`.
1435 - Improved the socket-error reporting when multiple protocols fail.
1437 - Fixed a case where a socket error could reference just-freed memory.
1439 - Failing to use a password file that was specified on the command-line is now
1442 - Fix the non-root updating of directories that don't have the read and/or
1445 - Make daemon-excluded file errors more error-like.
1447 - Fix a compilation issue on older C compilers (due to a misplaced var
1450 - Make configure avoid finding socketpair on Cygwin.
1452 - Avoid trying to reference `SO_BROADCAST` if the OS doesn't support it.
1454 - Fix some issues with the post-processing of the manpages.
1456 - Fixed the user home-dir handling in the lsh script. (See the support dir.)
1458 - Some minor manpage improvements.
1460 ------------------------------------------------------------------------------
1462 # NEWS for rsync 3.0.8 (26 Mar 2011)
1464 ## Changes in this version:
1468 - Fixed two buffer-overflow issues: one where a directory path that is exactly
1469 MAXPATHLEN was not handled correctly, and one handling a `--backup-dir` that
1470 is extra extra large.
1472 - Fixed a data-corruption issue when preserving hard-links without preserving
1473 file ownership, and doing deletions either before or during the transfer
1474 (CVE-2011-1097). This fixes some assert errors in the hard-linking code, and
1475 some potential failed checksums (via `-c`) that should have matched.
1477 - Fixed a potential crash when an rsync daemon has a filter/exclude list and
1478 the transfer is using ACLs or xattrs.
1480 - Fixed a hang if a really large file is being processed by an rsync that
1481 can't handle 64-bit numbers. Rsync will now complain about the file being
1482 too big and skip it.
1484 - For devices and special files, we now avoid gathering useless ACL and/or
1485 xattr information for files that aren't being copied. (The un-copied files
1486 are still put into the file list, but there's no need to gather data that is
1487 not going to be used.) This ensures that if the user uses `--no-D`, that
1488 rsync can't possibly complain about being unable to gather extended
1489 information from special files that are in the file list (but not in the
1492 - Properly handle requesting remote filenames that start with a dash. This
1493 avoids a potential error where a filename could be interpreted as a (usually
1496 - Fixed a bug in the comparing of upper-case letters in file suffixes for
1499 - If an rsync daemon has a module configured without a path setting, rsync
1500 will now disallow access to that module.
1502 - If the destination arg is an empty string, it will be treated as a reference
1503 to the current directory (as 2.x used to do).
1505 - If rsync was compiled with a newer time-setting function (such as lutimes),
1506 rsync will fall-back to an older function (such as utimes) on a system where
1507 the newer function is not around. This helps to make the rsync binary more
1508 portable in mixed-OS-release situations.
1510 - Fixed a batch-file writing bug that would not write out the full set of
1511 compatibility flags that the transfer was using. This fixes a potential
1512 protocol problem for a batch file that contains a sender-side I/O error: it
1513 would have been sent in a way that the batch-reader wasn't expecting.
1515 - Some improvements to the hard-linking code to ensure that device-number
1516 hashing is working right, and to supply more information if the hard-link
1519 - The `--inplace` code was improved to not search for an impossible checksum
1520 position. The quadruple-verbose chunk[N] message will now mention when an
1521 inplace chunk was handled by a seek rather than a read+write.
1523 - Improved ACL mask handling, e.g. for Solaris.
1525 - Fixed a bug that prevented `--numeric-ids` from disabling the translation of
1526 user/group IDs for ACLs.
1528 - Fixed an issue where an xattr and/or ACL transfer that used an alt-dest
1529 option (e.g. `--link-dest`) could output an error trying to itemize the
1530 changes against the alt-dest directory's xattr/ACL info but was instead
1531 trying to access the not-yet-existing new destination directory.
1533 - Improved xattr system-error messages to mention the full path to the file.
1535 - The `--link-dest` checking for identical symlinks now avoids considering
1536 attribute differences that cannot be changed on the receiver.
1538 - Avoid trying to read/write xattrs on certain file types for certain OSes.
1539 Improved configure to set `NO_SYMLINK_XATTRS`, `NO_DEVICE_XATTRS`, and/or
1540 `NO_SPECIAL_XATTRS` defines in config.h.
1542 - Improved the unsafe-symlink errors messages.
1544 - Fixed a bug setting xattrs on new files that aren't user writable.
1546 - Avoid re-setting xattrs on a hard-linked file w/the same xattrs.
1548 - Fixed a bug with `--fake-super` when copying files and dirs that aren't user
1551 - Fixed a bug where a sparse file could have its last sparse block turned into
1552 a real block when rsync sets the file size (requires ftruncate).
1554 - If a temp-file name is too long, rsync now avoids truncating the name in the
1555 middle of adjacent high-bit characters. This prevents a potential filename
1556 error if the filesystem doesn't allow a name to contain an invalid
1557 multi-byte sequence.
1559 - If a muli-protocol socket connection fails (i.e., when contacting a daemon),
1560 we now report all the failures, not just the last one. This avoids losing a
1561 relevant error (e.g. an IPv4 connection-refused error) that happened before
1562 the final error (e.g. an IPv6 protocol-not-supported error).
1564 - Generate a transfer error if we try to call chown with a `-1` for a uid or a
1565 gid (which is not settable).
1567 - Fixed the working of `--force` when used with `--one-file-system`.
1569 - Fix the popt arg parsing so that an option that doesn't take an arg will
1570 reject an attempt to supply one (can configure `--with-included-popt` if
1571 your system's popt library doesn't yet have this fix).
1573 - A couple minor option tweaks to the rrsync script, and also some regex
1574 changes that make vim highlighting happier. (See the support dir.)
1576 - Fixed some issues in the mnt-excl script. (See the support dir.)
1578 - Various manpage improvements.
1582 - Added `.hg/` to the default cvs excludes (see `-C` & `--cvs-exclude`).
1584 ### DEVELOPER RELATED:
1586 - Use lchmod() whenever it is available (not just on symlinks).
1588 - A couple fixes to the `socketpair_tcp()` routine.
1590 - Updated the helper scripts in the packaging subdirectory.
1592 - Renamed configure.in to configure.ac.
1594 - Fixed configure's checking for iconv routines for newer OS X versions.
1596 - Fixed the testsuite/xattrs.test script on OS X.
1598 ------------------------------------------------------------------------------
1600 # NEWS for rsync 3.0.7 (31 Dec 2009)
1602 ## Changes in this version:
1606 - Fixed a bogus free when using `--xattrs` with `--backup`.
1608 - Avoid an error when `--dry-run` was trying to stat a prior hard-link file
1609 that hasn't really been created.
1611 - Fixed a problem with `--compress` (`-z`) where the receiving side could
1612 return the error "`inflate (token) returned -5`".
1614 - Fixed a bug where `--delete-during` could delete in a directory before it
1615 noticed that the sending side sent an I/O error for that directory (both
1616 sides of the transfer must be at least 3.0.7).
1618 - Improved `--skip-compress`'s error handling of bad character-sets and got
1619 rid of a lingering debug fprintf().
1621 - Fixed the daemon's conveyance of `io_error` value from the sender.
1623 - An rsync daemon use seteuid() (when available) if it used setuid().
1625 - Get the permissions right on a `--fake-super` transferred directory that
1626 needs more owner permissions to emulate root behavior.
1628 - An absolute-path filter rule (i.e. with a '/' modifier) no longer loses its
1629 modifier when sending the filter rules to the remote rsync.
1631 - Improved the "`--delete does not work without -r or -d`" message.
1633 - Improved rsync's handling of `--timeout` to avoid a weird timeout case where
1634 the sender could timeout even though it has recently written data to the
1635 socket (but hasn't read data recently, due to the writing).
1637 - Some misc manpage improvements.
1639 - Fixed the chmod-temp-dir testsuite on a system without /var/tmp.
1641 - Make sure that a timeout specified in the daemon's config is used as a
1642 maximum timeout value when the user also specifies a timeout.
1644 - Improved the error-exit reporting when rsync gets an error trying to cleanup
1645 after an error: the initial error is reported.
1647 - Improved configure's detection of IPv6 for Solaris and Cygwin.
1649 - The AIX sysacls routines will now return ENOSYS if ENOTSUP is missing.
1651 - Made our (only used if missing) getaddrinfo() routine use `inet_pton()`
1652 (which we also provide) instead of `inet_aton()`.
1654 - The exit-related debug messages now mention the program's role so it is
1655 clear who output what message.
1657 ### DEVELOPER RELATED:
1659 - Got rid of type-punned compiler warnings output by newer gcc versions.
1661 - The Makefile now ensures that proto.h will be rebuilt if config.h changes.
1663 - The testsuite no longer uses `id -u`, so it works better on Solaris.
1665 ------------------------------------------------------------------------------
1667 # NEWS for rsync 3.0.6 (8 May 2009)
1669 ## Changes in this version:
1673 - Fixed a `--read-batch` hang when rsync is reading a batch file that was
1674 created from an incremental-recursion transfer.
1676 - Fixed the daemon's socket code to handle the simultaneous arrival of
1677 multiple connections.
1679 - Fix `--safe-links`/`--copy-unsafe-links` to properly handle symlinks that
1680 have consecutive slashes in the value.
1682 - Fixed the parsing of an `[IPv6_LITERAL_ADDR]` when a USER@ is prefixed.
1684 - The sender now skips a (bogus) symlink that has a 0-length value, which
1685 avoids a transfer error in the receiver.
1687 - Fixed a case where the sender could die with a tag-0 error if there was an
1688 I/O during the sending of the file list.
1690 - Fixed the rrsync script to avoid a server-side problem when `-e` is at the
1691 start of the short options.
1693 - Fixed a problem where a vanished directory could turn into an exit code 23
1694 instead of the proper exit code 24.
1696 - Fixed the `--iconv` conversion of symlinks when doing a local copy.
1698 - Fixed a problem where `--one-file-system` was not stopping deletions on the
1699 receiving side when a mount-point directory did not match a directory in the
1702 - Fixed the dropping of an ACL mask when no named ACL values were present.
1704 - Fixed an ACL/xattr corruption issue where the `--backup` option could cause
1705 rsync to associate the wrong ACL/xattr information with received files.
1707 - Fixed the use of `--xattrs` with `--only-write-batch`.
1709 - Fixed the use of `--dry-run` with `--read-batch`.
1711 - Fixed configure's erroneous use of target.
1713 - Fixed configure's `--disable-debug` option.
1715 - Fixed a run-time issue for systems that can't find `iconv_open()` by adding
1716 the `--disable-iconv-open` configure option.
1718 - Complain and die if the user tries to combine `--remove-source-files` (or
1719 the deprecated `--remove-sent-files`) with `--read-batch`.
1721 - Fixed an failure transferring special files from Solaris to Linux.
1723 ------------------------------------------------------------------------------
1725 # NEWS for rsync 3.0.5 (28 Dec 2008)
1727 ## Changes in this version:
1731 - Initialize xattr data in a couple spots in the hlink code, which avoids a
1732 crash when the xattr pointer's memory happens to start out non-zero. Also
1733 fixed the itemizing of an alt-dest file's xattrs when hard-linking.
1735 - Don't send a bogus `-` option to an older server if there were no short
1738 - Fixed skipping of unneeded updates in a batch file when incremental
1739 recursion is active. Added a test for this. Made batch-mode handle `redo`
1740 files properly (and without hanging).
1742 - Fix the %P logfile escape when the daemon logs from inside a chroot.
1744 - Fixed the use of `-s` (`--protect-args`) when used with a remote source or
1745 destination that had an empty path (e.g. `host:`). Also fixed a problem when
1746 `-s` was used when accessing a daemon via a remote-shell.
1748 - Fixed the use of a dot-dir path (e.g. foo/./bar) inside a `--files-from`
1749 file when the root of the transfer isn't the current directory.
1751 - Fixed a bug with `-K --delete` removing symlinks to directories when
1752 incremental recursion is active.
1754 - Fixed a hard to trigger hang when using `--remove-source-files`.
1756 - Got rid of an annoying delay when accessing a daemon via a remote-shell.
1758 - Properly ignore (superfluous) source args on a `--read-batch` command.
1760 - Improved the manpage's description of the `*` wildcard to remove the
1761 confusing `non-empty` qualifier.
1763 - Fixed reverse lookups in the compatibility-library version of getnameinfo().
1765 - Fixed a bug when using `--sparse` on a sparse file that has over 2GB of
1766 consecutive sparse data.
1768 - Avoid a hang when using at least 3 `--verbose` options on a transfer with a
1769 client sender (which includes local copying).
1771 - Fixed a problem with `--delete-delay` reporting an error when it was ready
1772 to remove a directory that was now gone.
1774 - Got rid of a bunch of `warn_unused_result` compiler warnings.
1776 - If an ftruncate() on a received file fails, it now causes a partial-
1779 - Allow a path with a leading `//` to be preserved (CYGWIN only).
1783 - Made the atomic-rsync script able to perform a fully atomic update of the
1784 copied hierarchy when the destination is setup using a particular symlink
1785 idiom. (See the support dir.)
1787 ------------------------------------------------------------------------------
1789 # NEWS for rsync 3.0.4 (6 Sep 2008)
1791 ## Changes in this version:
1795 - Fixed a bug in the hard-linking code where it would sometimes try to
1796 allocate 0 bytes of memory (which fails on some OSes, such as AIX).
1798 - Fixed the hard-linking of files from a device that has a device number of 0
1799 (which seems to be a common device number on NetBSD).
1801 - Fixed the handling of a `--partial-dir` that cannot be created. This
1802 particularly impacts the `--delay-updates` option (since the files cannot be
1803 delayed without a partial-dir), and was potentially destructive if the
1804 `--remove-source-files` was also specified.
1806 - Fixed a couple issues in the `--fake-super` handling of xattrs when the
1807 destination files have root-level attributes (e.g. selinux values) that a
1808 non-root copy can't affect.
1810 - Improved the keep-alive check in the generator to fire consistently in
1811 incremental-recursion mode when `--timeout` is enabled.
1813 - The `--iconv` option now converts the content of a symlink too, instead of
1814 leaving it in the wrong character-set (requires 3.0.4 on both sides of the
1817 - When using `--iconv`, if a filename fails to convert on the receiving side,
1818 this no longer makes deletions in the root-dir of the transfer fail silently
1819 (the user now gets a warning about deletions being disabled due to IO error
1820 as long as `--ignore-errors` was not specified).
1822 - When using `--iconv`, if a server-side receiver can't convert a filename,
1823 the error message sent back to the client no longer mangles the name with
1824 the wrong charset conversion.
1826 - Fixed a potential alignment issue in the IRIX ACL code when allocating the
1827 initial `struct acl` object. Also, cast mallocs to avoid warnings.
1829 - Changed some errors that were going to stdout to go to stderr.
1831 - Made `human_num()` and `human_dnum()` able to output a negative number
1832 (rather than outputting a cryptic string of punctuation).
1836 - Rsync will avoid sending an `-e` option to the server if an older protocol
1837 is requested (and thus the option would not be useful). This lets the user
1838 specify the `--protocol=29` option to access an overly-restrictive server
1839 that is rejecting the protocol-30 use of `-e` to the server.
1841 - Improved the message output for an `RERR_PARTIAL` exit.
1843 ### DEVELOPER RELATED:
1845 - The Makefile will not halt for just a timestamp change on the Makefile or
1846 the configure files, only for actual changes in content.
1848 - Changed some commands in the testsuite's xattrs.test that called `rsync`
1849 instead of `$RSYNC`.
1851 - Enhanced the release scripts to be able to handle a branch release and to do
1852 even more consistency checks on the files.
1854 ------------------------------------------------------------------------------
1856 # NEWS for rsync 3.0.3 (29 Jun 2008)
1858 ## Changes in this version:
1862 - Fixed a wildcard matching problem in the daemon when a module has `use
1865 - Fixed a crash bug in the hard-link code.
1867 - Fixed the sending of xattr directory information when the code finds a
1868 `--link-dest` or `--copy-dest` directory with unchanged xattrs -- the
1869 destination directory now gets these unchanged xattrs properly applied.
1871 - Fixed an xattr-sending glitch that could cause an `Internal abbrev` error.
1873 - Fixed the combination of `--xattrs` and `--backup`.
1875 - The generator no longer allows a '.' dir to be excluded by a daemon-exclude
1878 - Fixed deletion handling when copying a single, empty directory (with no
1879 files) to a differently named, non-existent directory.
1881 - Fixed the conversion of spaces into dashes in the %M log escape.
1883 - Fixed several places in the code that were not returning the right errno
1884 when a function failed.
1886 - Fixed the backing up of a device or special file into a backup dir.
1888 - Moved the setting of the socket options prior to the connect().
1890 - If rsync exits in the middle of a `--progress` output, it now outputs a
1891 newline to help prevent the progress line from being overwritten.
1893 - Fixed a problem with how a destination path with a trailing slash or a
1894 trailing dot-dir was compared against the daemon excludes.
1896 - Fixed the sending of large (size > 16GB) files when talking to an older
1897 rsync (protocols < 30): we now use a compatible block size limit.
1899 - If a file's length is so huge that we overflow a checksum buffer count (i.e.
1900 several hundred TB), warn the user and avoid sending an invalid checksum
1901 struct over the wire.
1903 - If a source arg is excluded, `--relative` no longer adds the excluded arg's
1904 implied dirs to the transfer. This fix also made the exclude check happen in
1905 the better place in the sending code.
1907 - Use the `overflow_exit()` function for overflows, not `out_of_memory()`.
1909 - Improved the code to better handle a system that has only 32-bit file
1914 - The rsyncd.conf manpage now consistently refers to the parameters in the
1915 daemon config file as `parameters`.
1917 - The description of the `--inplace` option was improved.
1921 - Added a new script in the support directory, deny-rsync, which allows an
1922 admin to (temporarily) replace the rsync command with a script that sends an
1923 error message to the remote client via the rsync protocol.
1925 ### DEVELOPER RELATED:
1927 - Fixed a testcase failure if the tests are run as root and made some
1928 compatibility improvements.
1930 - Improved the daemon tests, including checking module comments, the listing
1931 of files, and the ensuring that daemon excludes can't affect a dot-dir arg.
1933 - Improved some build rules for those that build in a separate directory from
1934 the source, including better install rules for the manpages, and the fixing
1935 of a proto.h-tstamp rule that could make the binaries get rebuild without
1938 - Improved the testsuite to work around a problem with some utilities (e.g.
1939 `cp -p` & `touch -r`) rounding sub-second timestamps.
1941 - Ensure that the early patches don't cause any generated-file hunks to
1942 bleed-over into patches that follow.
1944 ------------------------------------------------------------------------------
1946 # NEWS for rsync 3.0.2 (8 Apr 2008)
1948 ## Changes in this version:
1952 - Fixed a potential buffer overflow in the xattr code.
1958 ### DEVELOPER RELATED:
1960 - The RPM spec file was improved to install more useful files.
1962 - A few developer-oriented scripts were moved from the support dir to the
1965 ------------------------------------------------------------------------------
1967 # NEWS for rsync 3.0.1 (3 Apr 2008)
1969 ## Changes in this version:
1971 ### NOTABLE CHANGES IN BEHAVIOR:
1973 - Added the 'c'-flag to the itemizing of non-regular files so that the
1974 itemized output doesn't get hidden if there were no attribute changes, and
1975 also so that the itemizing of a `--copy-links` run will distinguish between
1976 copying an identical non-regular file and the creation of a revised version
1977 with a new value (e.g. a changed symlink referent, a new device number,
1982 - Fixed a crash bug when a single-use rsync daemon (via remote shell) was run
1983 without specifying a `--config=FILE` option.
1985 - Fixed a crash when backing up a directory that has a default ACL.
1987 - Fixed a bug in the handling of xattr values that could cause rsync to not
1988 think that a file's extended attributes are up-to-date.
1990 - Fixed the working of `--fake-super` with `--link-dest` and `--xattrs`.
1992 - Fixed a hang when combining `--dry-run` with `--remove-source-files`.
1994 - Fixed a bug with `--iconv`'s handling of files that cannot be converted: a
1995 failed name can no longer cause a transfer failure.
1997 - Fixed the building of the rounding.h file on systems that need custom
1998 CPPFLAGS to be used. Also improved the error reporting if the building of
2001 - Fixed the use of the `--protect-args` (`-s`) option when talking to a
2004 - Fixed the `--ignore-existing` option's protection of files on the receiver
2005 that are non-regular files on the sender (e.g. if a symlink or a dir on the
2006 sender is trying to replace a file on the receiver). The reverse protection
2007 (protecting a dir/symlink/device from being replaced by a file) was already
2010 - Fixed an assert failure if `--hard-links` is combined with an option that
2011 can skip a file in a set of hard-linked files (i.e. `--ignore-existing`,
2012 `--append`, etc.), without skipping all the files in the set.
2014 - Avoid setting the modify time on a directory that already has the right
2015 modify time set. This avoids tweaking the dir's ctime.
2017 - Improved the daemon-exclude handling to do a better job of applying the
2018 exclude rules to path entries. It also sends the user an error just as if
2019 the files were actually missing (instead of silently ignoring the user's
2020 args), and avoids sending the user the filter-action messages for these
2021 non-user-initiated rules.
2023 - Fixed some glitches with the dry-run code's missing-directory handling,
2024 including a problem when combined with `--fuzzy`.
2026 - Fixed some glitches with the skipped-directory handling.
2028 - Fixed the 'T'-flag itemizing of symlinks when `--time` isn't preserved.
2030 - Fixed a glitch in the itemizing of permissions with the `-E` option.
2032 - The `--append` option's restricting of transfers to those that add data no
2033 longer prevents the updating of non-content changes to otherwise up-to-date
2034 files (i.e. those with the same content but differing permissions,
2035 ownership, xattrs, etc.).
2037 - Don't allow `--fake-super` to be specified with `-XX` (double `--xattrs`)
2038 because the options conflict. If a daemon has `fake super` enabled, it
2039 automatically downgrades a `-XX` request to `-X`.
2041 - Fixed a couple bugs in the parsing of daemon-config excludes that could make
2042 a floating exclude rule get treated as matching an absolute path.
2044 - A daemon doesn't try to auto-refuse the `iconv` option if iconv-support
2045 wasn't compiled in to the daemon (avoiding a warning in the logs).
2047 - Fixed the inclusion of per-dir merge files from implied dirs.
2049 - Fixed the rrsync script to work with the latest options that rsync sends,
2050 including its flag-specifying use of `-e` to the server. (See the support
2055 - Added the `--old-dirs` (`--old-d`) option to make it easier for a user to
2056 ask for file-listings with older rsync versions (this is easier than having
2057 to type `-r --exclude='/*/*'` manually).
2059 - When getting an error while asking an older rsync daemon for a file listing,
2060 rsync will try to notice if the error is a rejection of the `--dirs` (`-d`)
2061 option and let the user know how to work around the issue.
2063 - Added a few more `--no-OPTION` overrides.
2065 - Improved the documentation of the `--append` option.
2067 - Improved the documentation of the filter/exclude/include daemon parameters.
2071 - Fixed a couple minor bugs in the included popt library (ones which I sent to
2072 the official popt project for inclusion in the 1.14 release).
2074 - Fixed a stat() call that should have been `do_stat()` so that the proper
2075 normal/64-bit stat() function gets called. (Was in an area that should not
2076 have caused problems, though.)
2078 - Changed the file-glob code to do a directory scan without using the `glob`
2079 and `glob.h`. This lets us do the globbing with less memory churn, and also
2080 avoid adding daemon-excluded items to the returned args.
2082 ### DEVELOPER RELATED:
2084 - The configure script tries to get the user's compiler to not warn about
2085 unused function parameters if the build is not including one or more of the
2086 ACL/xattrs/iconv features.
2088 - The configure script now has better checks for figuring out if the included
2089 popt code should be used or not.
2091 - Fixed two testsuite glitches: avoid a failure if someone's `cd` command
2092 outputs the current directory when cd-ing to a relative path, and made the
2093 itemized test query how rsync was built to determine if it should expect
2094 hard-linked symlinks or not.
2096 - Updated the testsuite to verify that various bug fixes remain fixed.
2098 - The RPM spec file was updated to have: (1) comments for how to use the
2099 rsync-patch tar file, and (2) an /etc/xinetd.d/rsync file.
2101 - Updated the build scripts to work with a revised FTP directory structure.
2103 ------------------------------------------------------------------------------
2105 # NEWS for rsync 3.0.0 (1 Mar 2008)
2107 ## Changes in this version:
2109 ### PROTOCOL NUMBER:
2111 - The protocol number was changed to 30.
2113 ### NOTABLE CHANGES IN BEHAVIOR:
2115 - The handling of implied directories when using `--relative` has changed to
2116 send them as directories (e.g. no implied dir is ever sent as a symlink).
2117 This avoids unexpected behavior and should not adversely affect most people.
2118 If you're one of those rare individuals who relied upon having an implied
2119 dir be duplicated as a symlink, you should specify the transfer of the
2120 symlink and the transfer of the referent directory as separate args. (See
2121 also `--keep-dirlinks` and `--no-implied-dirs`.) Also, exclude rules no
2122 longer have a partial effect on implied dirs.
2124 - Requesting a remote file-listing without specifying `-r` (`--recursive`) now
2125 sends the `-d` (`--dirs`) option to the remote rsync rather than sending
2126 `-r` along with an extra exclude of `/*/*`. If the remote rsync does not
2127 understand the `-d` option (i.e. it is 2.6.3 or older), you will need to
2128 either turn off `-d` (`--no-d`), or specify `-r --exclude='/*/*'` manually.
2130 - In `--dry-run` mode, the last line of the verbose summary text is output
2131 with a "(DRY RUN)" suffix to help remind you that no updates were made.
2132 Similarly, `--only-write-batch` outputs `(BATCH ONLY)`.
2134 - A writable rsync daemon with `use chroot` disabled now defaults to a
2135 symlink-munging behavior designed to make symlinks safer while also allowing
2136 absolute symlinks to be stored and retrieved. This also has the effect of
2137 making symlinks unusable while they're in the daemon's hierarchy. See the
2138 daemon's `munge symlinks` parameter for details.
2140 - Starting up an extra copy of an rsync daemon will not clobber the pidfile
2141 for the running daemon -- if the pidfile exists, the new daemon will exit
2142 with an error. This means that your wrapper script that starts the rsync
2143 daemon should be made to handle lock-breaking (if you want any automatic
2144 breaking of locks to be done).
2148 - A daemon with `use chroot = no` and excluded items listed in the daemon
2149 config file now properly checks an absolute-path arg specified for these
2150 options: `--compare-dest`, `--link-dest`, `--copy-dest`, `--partial-dir`,
2151 `--backup-dir`, `--temp-dir`, and `--files-from`.
2153 - A daemon can now be told to disable all user- and group-name translation on
2154 a per-module basis. This avoids a potential problem with a writable daemon
2155 module that has `use chroot` enabled -- if precautions weren't taken, a user
2156 could try to add a missing library and get rsync to use it. This makes rsync
2157 safer by default, and more configurable when id-translation is not desired.
2158 See the daemon's `numeric ids` parameter for full details.
2160 - A chroot daemon can now indicate which part of its path should affect the
2161 chroot call, and which part should become an inside-chroot path for the
2162 module. This allows you to have outside-the-transfer paths (such as for
2163 libraries) even when you enable chroot protection. The idiom used in the
2164 rsyncd.conf file is: `path = /chroot/dirs/./dirs/inside`
2166 - If a file's data arrived successfully on the receiving side but the rename
2167 of the temporary file to the destination file failed AND the
2168 `--remove-source-files` (or the deprecated `--remove-sent-files`) option was
2169 specified, rsync no longer erroneously removes the associated source file.
2171 - Fixed the output of `-ii` when combined with one of the `--*-dest` options:
2172 it now itemizes all the items, not just the changed ones.
2174 - Made the output of all file types consistent when using a `--*-dest` option.
2175 Prior versions would output too many creation events for matching items.
2177 - The code that waits for a child pid now handles being interrupted by a
2178 signal. This fixes a problem with the pre-xfer exec function not being able
2179 to get the exit status from the script.
2181 - A negated filter rule (i.e. with a '!' modifier) no longer loses the
2182 negation when sending the filter rules to the remote rsync.
2184 - Fixed a problem with the `--out-format` (aka `--log-format`) option %f: it
2185 no longer outputs superfluous directory info for a non-daemon rsync.
2187 - Fixed a problem with `-vv` (double `--verbose`) and `--stats` when `pushing`
2188 files (which includes local copies). Version 2.6.9 would complete the copy,
2189 but exit with an error when the receiver output its memory stats.
2191 - If `--password-file` is used on a non-daemon transfer, rsync now complains
2192 and exits. This should help users figure out that they can't use this option
2193 to control a remote shell's password prompt.
2195 - Make sure that directory permissions of a newly-created destination
2196 directory are handled right when `--perms` is left off.
2198 - The itemized output of a newly-created destination directory is now output
2199 as a creation event, not a change event.
2201 - Improved `--hard-link` so that more corner cases are handled correctly when
2202 combined with options such as `--link-dest` and/or `--ignore-existing`.
2204 - The `--append` option no longer updates a file that has the same size.
2206 - Fixed a bug when combining `--backup` and `--backup-dir` with `--inplace`:
2207 any missing backup directories are now created.
2209 - Fixed a bug when using `--backup` and `--inplace` with `--whole-file` or
2210 `--read-batch`: backup files are actually created now.
2212 - The daemon pidfile is checked and created sooner in the startup sequence.
2214 - If a daemon module's `path` value is not an absolute pathname, the code now
2215 makes it absolute internally (making it work properly).
2217 - Ensure that a temporary file always has owner-write permission while we are
2218 writing to it. This avoids problems with some network filesystems when
2219 transferring read-only files.
2221 - Any errors output about password-file reading no longer cause an error at
2222 the end of the run about a partial transfer.
2224 - The `--read-batch` option for protocol 30 now ensures that several more
2225 options are set correctly for the current batch file: `--iconv`, `--acls`,
2226 `--xattrs`, `--inplace`, `--append`, and `--append-verify`.
2228 - Using `--only-write-batch` to a daemon receiver now works properly (older
2229 versions would update some files while writing the batch).
2231 - Avoid outputting a "file has vanished" message when the file is a broken
2232 symlink and `--copy-unsafe-links` or `--copy-dirlinks` is used (the code
2233 already handled this for `--copy-links`).
2235 - Fixed the combination of `--only-write-batch` and `--dry-run`.
2237 - Fixed rsync's ability to remove files that are not writable by the file's
2238 owner when rsync is running as the same user.
2240 - When transferring large files, the sender's hashtable of checksums is kept
2241 at a more reasonable state of fullness (no more than 80% full) so that the
2242 scanning of the hashtable will not bog down as the number of blocks
2247 - A new incremental-recursion algorithm is now used when rsync is talking to
2248 another 3.x version. This starts the transfer going more quickly (before all
2249 the files have been found), and requires much less memory. See the
2250 `--recursive` option in the manpage for some restrictions.
2252 - Lowered memory use in the non-incremental-recursion algorithm for typical
2253 option values (usually saving from 21-29 bytes per file).
2255 - The default `--delete` algorithm is now `--delete-during` when talking to a
2256 3.x rsync. This is a faster scan than using `--delete-before` (which is the
2257 default when talking to older rsync versions), and is compatible with the
2258 new incremental recursion mode.
2260 - Rsync now allows multiple remote-source args to be specified rather than
2261 having to rely on a special space-splitting side-effect of the remote-
2262 shell. Additional remote args must specify the same host or an empty one
2263 (e.g. empty: `:file1` or `::module/file2`). For example, this means that
2264 local use of brace expansion now works: `rsync -av host:dir/{f1,f2} .`
2266 - Added the `--protect-args` (`-s`) option, that tells rsync to send most of
2267 the command-line args at the start of the transfer rather than as args to
2268 the remote-shell command. This protects them from space-splitting, and only
2269 interprets basic wildcard special shell characters (`*?[`).
2271 - Added the `--delete-delay` option, which is a more efficient way to delete
2272 files at the end of the transfer without needing a separate delete pass.
2274 - Added the `--acls` (`-A`) option to preserve Access Control Lists. This is
2275 an improved version of the prior patch that was available, and it even
2276 supports OS X ACLs. If you need to have backward compatibility with old,
2277 ACL-patched versions of rsync, apply the acls.diff file from the patches
2280 - Added the `--xattrs` (`-X`) option to preserve extended attributes. This is
2281 an improved version of the prior patch that was available, and it even
2282 supports OS X xattrs (which includes their resource fork data). If you need
2283 to have backward compatibility with old, xattr-patched versions of rsync,
2284 apply the xattrs.diff file from the patches dir.
2286 - Added the `--fake-super` option that allows a non-super user to preserve all
2287 attributes of a file by using a special extended-attribute idiom. It even
2288 supports the storing of foreign ACL data on your backup server. There is
2289 also an analogous `fake super` parameter for an rsync daemon.
2291 - Added the `--iconv` option, which allows rsync to convert filenames from one
2292 character-set to another during the transfer. The default is to make this
2293 feature available as long as your system has `iconv_open()`. If compilation
2294 fails, specify `--disable-iconv` to configure, and then rebuild. If you want
2295 rsync to perform character-set conversions by default, you can specify
2296 `--enable-iconv=CONVERT_STRING` with the default value for the `--iconv`
2297 option that you wish to use. For example, `--enable-iconv=.` is a good
2298 choice. See the rsync manpage for an explanation of the `--iconv` option's
2301 - A new daemon config parameter, `charset`, lets you control the character-
2302 set that is used during an `--iconv` transfer to/from a daemon module. You
2303 can also set your daemon to refuse `no-iconv` if you want to force the
2304 client to use an `--iconv` transfer (requiring an rsync 3.x client).
2306 - Added the `--skip-compress=LIST` option to override the default list of file
2307 suffixes that will not be compressed when using `--compress` (`-z`).
2309 - The daemon's default for `dont compress` was extended to include: `*.7z`
2310 `*.mp[34]` `*.mov` `*.avi` `*.ogg` `*.jpg` `*.jpeg` and the name-matching routine was also
2311 optimized to run more quickly.
2313 - The `--max-delete` option now outputs a warning if it skipped any file
2314 deletions, including a count of how many deletions were skipped. (Older
2315 versions just silently stopped deleting things.)
2317 - You may specify `--max-delete=0` to a 3.0.0 client to request that it warn
2318 about extraneous files without deleting anything. If you're not sure what
2319 version the client is, you can use the less-obvious `--max-delete=-1`, as
2320 both old and new versions will treat that as the same request (though older
2321 versions don't warn).
2323 - The `--hard-link` option now uses less memory on both the sending and
2324 receiving side for all protocol versions. For protocol 30, the use of a
2325 hashtable on the sending side allows us to more efficiently convey to the
2326 receiver what files are linked together. This reduces the amount of data
2327 sent over the socket by a considerable margin (rather than adding more
2328 data), and limits the in-memory storage of the device+inode information to
2329 just the sending side for the new protocol 30, or to the receiving side when
2330 speaking an older protocol (note that older rsync versions kept the
2331 device+inode information on both sides).
2333 - The filter rules now support a perishable (`p`) modifier that marks rules
2334 that should not have an effect in a directory that is being deleted. e.g.
2335 `-f '-p .svn/'` would only affect `live` .svn directories.
2337 - Rsync checks all the alternate-destination args for validity (e.g.
2338 `--link-dest`). This lets the user know when they specified a directory that
2341 - If we get an ENOSYS error setting the time on a symlink, we don't complain
2342 about it anymore (for those systems that even support the setting of the
2343 modify-time on a symlink).
2345 - Protocol 30 now uses MD5 checksums instead of MD4.
2347 - Changed the `--append` option to not checksum the existing data in the
2348 destination file, which speeds up file appending.
2350 - Added the `--append-verify` option, which works like the older `--append`
2351 option (verifying the existing data in the destination file). For
2352 compatibility with older rsync versions, any use of `--append` that is
2353 talking protocol 29 or older will revert to the `--append-verify` method.
2355 - Added the `--contimeout=SECONDS` option that lets the user specify a
2356 connection timeout for rsync daemon access.
2358 - Documented and extended the support for the `RSYNC_CONNECT_PROG` variable
2359 that can be used to enhance the client side of a daemon connection.
2361 - Improved the dashes and double-quotes in the nroff manpage output.
2363 - Rsync now supports a lot more `--no-OPTION` override options.
2367 - The file-list sorting algorithm now uses a sort that keeps any same-named
2368 items in the same order as they were specified. This allows rsync to always
2369 ensure that the first of the duplicates is the one that will be included in
2370 the copy. The new sort is also faster than the glibc version of qsort() and
2373 - Rsync now supports the transfer of 64-bit timestamps (`time_t` values).
2375 - Made the file-deletion code use a little less stack when recursing through a
2376 directory hierarchy of extraneous files.
2378 - Fixed a build problem with older (2.x) versions of gcc.
2380 - Added some isType() functions that make dealing with signed characters
2381 easier without forcing variables via casts.
2383 - Changed strcat/strcpy/sprintf function calls to use safer versions.
2385 - Upgraded the included popt version to 1.10.2 and improved its use of
2386 string-handling functions.
2388 - Added missing prototypes for compatibility functions from the lib dir.
2390 - Configure determines if iconv() has a const arg, allowing us to avoid a
2393 - Made the sending of some numbers more efficient for protocol 30.
2395 - Make sure that a daemon process doesn't mind if the client was weird and
2396 omitted the `--server` option.
2398 - There are more internal logging categories available in protocol 30 than the
2399 age-old FINFO and FERROR, including `FERROR_XFER` and FWARN. These new
2400 categories allow some errors and warnings to go to stderr without causing an
2401 erroneous end-of-run warning about some files not being able to be
2404 - Improved the use of `const` on pointers.
2406 - Improved J.W.'s `pool_alloc` routines to add a way of incrementally freeing
2407 older sections of a pool's memory.
2409 - The getaddrinfo.c compatibility code in the `lib` dir was replaced with some
2410 new code (derived from samba, derived from PostgreSQL) that has a better
2411 license than the old code.
2413 ### DEVELOPER RELATED:
2415 - Rsync is now licensed under the GPLv3 or later.
2417 - Rsync is now being maintained in a `git` repository instead of CVS (though
2418 the old CVS repository still exists for historical access). Several
2419 maintenance scripts were updated to work with git.
2421 - Generated files are no longer committed into the source repository. The
2422 autoconf and autoheader commands are now automatically run during the normal
2423 use of `configure` and `make`. The latest dev versions of all generated
2424 files can also be copied from the samba.org web site (see the prepare-source
2425 script's fetch option).
2427 - The `patches` directory of diff files is now built from branches in the
2428 rsync git repository (branch patch/FOO creates file patches/FOO.diff). This
2429 directory is now distributed in a separate separate tar file named
2430 rsync-patches-VERSION.tar.gz instead of the main rsync-VERSION.tar.gz.
2432 - The proto.h file is now built using a simple perl script rather than a
2433 complex awk script, which proved to be more widely compatible.
2435 - When running the tests, we now put our per-test temp dirs into a sub-
2436 directory named testtmp (which is created, if missing). This allows someone
2437 to symlink the testtmp directory to another filesystem (which is useful if
2438 the build dir's filesystem does not support ACLs and xattrs, but another
2441 - Rsync now has a way of handling protocol-version changes during the
2442 development of a new protocol version. This causes any out-of-sync versions
2443 to speak an older protocol rather than fail in a cryptic manner. This
2444 addition makes it safer to deploy a pre-release version that may interact
2445 with the public. This new exchange of sub-version info does not interfere
2446 with the `{MIN,MAX}_PROTOCOL_VERSION` checking algorithm (which does not
2447 have enough range to allow the main protocol number to be incremented for
2448 every minor tweak in that happens during development).
2450 - The csprotocol.txt file was updated to mention the daemon protocol change in
2453 ------------------------------------------------------------------------------
2455 # NEWS for rsync 2.6.9 (6 Nov 2006)
2457 ## Changes in this version:
2461 - If rsync is interrupted via a handled signal (such as SIGINT), it will once
2462 again clean-up its temp file from the destination dir.
2464 - Fixed an overzealous sanitizing bug in the handling of the `--link-dest`,
2465 `--copy-dest`, and `--compare-dest` options to a daemon without chroot: if
2466 the copy's destination dir is deeper than the top of the module's path,
2467 these options now accept a safe number of parent-dir (../) references (since
2468 these options are relative to the destination dir). The old code incorrectly
2469 chopped off all `../` prefixes for these options, no matter how deep the
2470 destination directory was in the module's hierarchy.
2472 - Fixed a bug where a deferred info/error/log message could get sent directly
2473 to the sender instead of being handled by rwrite() in the generator. This
2474 fixes an `unexpected tag 3` fatal error, and should also fix a potential
2475 problem where a deferred info/error message from the receiver might bypass
2476 the log file and get sent only to the client process. (These problems could
2477 only affect an rsync daemon that was receiving files.)
2479 - Fixed a bug when `--inplace` was combined with a `--*-dest` option and we
2480 update a file's data using an alternate basis file. The code now notices
2481 that it needs to copy the matching data from the basis file instead of
2482 (wrongly) assuming that it was already present in the file.
2484 - Fixed a bug where using `--dry-run` with a `--*-dest` option with a path
2485 relative to a directory that does not yet exist: the affected option gets
2486 its proper path value so that the output of the dry-run is right.
2488 - Fixed a bug in the %f logfile escape when receiving files: the destination
2489 path is now included in the output (e.g. you can now tell when a user
2490 specifies a subdir inside a module).
2492 - If the receiving side fails to create a directory, it will now skip trying
2493 to update everything that is inside that directory.
2495 - If `--link-dest` is specified with `--checksum` but without `--times`, rsync
2496 will now allow a hard-link to be created to a matching link-dest file even
2497 when the file's modify-time doesn't match the server's file.
2499 - The daemon now calls more timezone-using functions prior to doing a chroot.
2500 This should help some C libraries to generate proper timestamps from inside
2501 a chrooted daemon (and to not try to access /etc/timezone over and over
2504 - Fixed a bug in the handling of an absolute `--partial-dir=ABS_PATH` option:
2505 it now deletes an alternate basis file from the partial-dir that was used to
2506 successfully update a destination file.
2508 - Fixed a bug in the handling of `--delete-excluded` when using a per-dir
2509 merge file: the merge file is now honored on the receiving side, and only
2510 its unqualified include/exclude commands are ignored (just as is done for
2511 global include/excludes).
2513 - Fixed a recent bug where `--delete` was not working when transferring from
2514 the root (/) of the filesystem with `--relative` enabled.
2516 - Fixed a recent bug where an `--exclude='*'` could affect the root (/) of the
2517 filesystem with `--relative` enabled.
2519 - When `--inplace` creates a file, it is now created with owner read/write
2520 permissions (0600) instead of no permissions at all. This avoids a problem
2521 continuing a transfer that was interrupted (since `--inplace` will not
2522 update a file that has no write permissions).
2524 - If either `--remove-source-files` or `--remove-sent-files` is enabled and we
2525 are unable to remove the source file, rsync now outputs an error.
2527 - Fixed a bug in the daemon's `incoming chmod` rule: newly-created directories
2528 no longer get the 'F' (file) rules applied to them.
2530 - Fixed an infinite loop bug when a filter rule was rejected due to being
2533 - When the server receives a `--partial-dir` option from the client, it no
2534 longer runs the client-side code that adds an assumed filter rule (since the
2535 client will be sending us the rules in the usual manner, and they may have
2536 chosen to override the auto-added rule).
2540 - Added the `--log-file=FILE` and `--log-file-format=FORMAT` options. These
2541 can be used to tell any rsync to output what it is doing to a log file.
2542 They work with a client rsync, a non-daemon server rsync (see the manpage
2543 for instructions), and also allows the overriding of rsyncd.conf settings
2544 when starting a daemon.
2546 - The `--log-format` option was renamed to be `--out-format` to avoid
2547 confusing it with affecting the log-file output. (The old option remains as
2548 an alias for the new to preserve backward compatibility.)
2550 - Made `log file` and `syslog facility` settable on a per-module basis in the
2551 daemon's config file.
2553 - Added the `--remove-source-files` option as a replacement for the (now
2554 deprecated) `--remove-sent-files` option. This new option removes all
2555 non-dirs from the source directories, even if the file was already
2556 up-to-date. This fixes a problem where interrupting an rsync that was using
2557 `--remove-sent-files` and restarting it could leave behind a file that the
2558 earlier rsync synchronized, but didn't get to remove. (The deprecated
2559 `--remove-sent-files` is still understood for now, and still behaves in the
2560 same way as before.)
2562 - Added the option `--no-motd` to suppress the message-of-the-day output from
2563 a daemon when doing a copy. (See the manpage for a caveat.)
2565 - Added a new environment variable to the pre-/post-xfer exec commands (in the
2566 daemon's config file): `RSYNC_PID`. This value will be the same in both the
2567 pre- and post-xfer commands, so it can be used as a unique ID if the
2568 pre-xfer command wants to cache some arg/request info for the post-xfer
2573 - Did a code audit using IBM's code-checker program and made several changes,
2574 including: replacing most of the strcpy() and sprintf() calls with
2575 strlcpy(), snprintf(), and memcpy(), adding a 0-value to an enum that had
2576 been intermingling a literal 0 with the defined enum values, silencing some
2577 uninitialized memory checks, marking some functions with a `noreturn`
2578 attribute, and changing an `if` that could never succeed on some platforms
2579 into a pre-processor directive that conditionally compiles the code.
2581 - Fixed a potential bug in `f_name_cmp()` when both the args are a top-level
2582 `.` dir (which doesn't happen in normal operations).
2584 - Changed `exit_cleanup()` so that it can never return instead of exit. The
2585 old code might return if it found the `exit_cleanup()` function was being
2586 called recursively. The new code is segmented so that any recursive calls
2587 move on to the next step of the exit-processing.
2589 - The macro WIFEXITED(stat) will now be defined if the OS didn't already
2592 ### DEVELOPER RELATED:
2594 - The acls.diff and xattrs.diff patches have received a bunch of work to make
2595 them much closer to being acceptable in the main distribution. The xattrs
2596 patch also has some preliminary Mac OS X and FreeBSD compatibility code that
2597 various system types to exchange extended file-attributes.
2599 - A new diff in the patches dir, fake-root.diff, allows rsync to maintain a
2600 backup hierarchy with full owner, group, and device info without actually
2601 running as root. It does this using a special extended attribute, so it
2602 depends on xattrs.diff (which depends on acls.diff).
2604 - The rsync.yo and rsyncd.conf.yo files have been updated to work better with
2605 the latest yodl 2.x releases.
2607 - Updated config.guess and config.sub to their 2006-07-02 versions.
2609 - Updated various files to include the latest FSF address and to have
2610 consistent opening comments.
2612 ------------------------------------------------------------------------------
2614 # NEWS for rsync 2.6.8 (22 Apr 2006)
2616 ## Changes in this version:
2620 - Fixed a bug in the exclude code where an anchored exclude without any
2621 wildcards fails to match an absolute source arg, but only when `--relative`
2624 - Improved the I/O code for the generator to fix a potential hang when the
2625 receiver gets an EOF on the socket but the generator's select() call never
2626 indicates that the socket is writable for it to be notified about the EOF.
2627 (This can happen when using stunnel).
2629 - Fixed a problem with the file-reading code where a failed read (such as that
2630 caused by a bad sector) would not advance the file's read-position beyond
2631 the failed read's data.
2633 - Fixed a logging bug where the `log file` directive was not being honored in
2634 a single-use daemon (one spawned by a remote-shell connection or by init).
2636 - If rsync cannot honor the `--delete` option, we output an error and exit
2637 instead of silently ignoring the option.
2639 - Fixed a bug in the `--link-dest` code that prevented special files (such as
2640 fifos) from being linked.
2642 - The ability to hard-link symlinks and special files is now determined at
2643 configure time instead of at runtime. This fixes a bug with `--link-dest`
2644 creating a hard-link to a symlink's referent on a BSD system.
2648 - In daemon mode, if rsync fails to bind to the requested port, the error(s)
2649 returned by socket() and/or bind() are now logged.
2651 - When we output a fatal error, we now output the version of rsync in the
2654 - Improved the documentation for the `--owner` and `--group` options.
2656 - The rsyncstats script in `support` has an improved line-parsing regex that
2657 is easier to read and also makes it to parse syslog-generated lines.
2659 - A new script in `support`: file-attr-restore, can be used to restore the
2660 attributes of a file-set (the permissions, ownership, and group info) taken
2661 from the cached output of a `find ARG... -ls` command.
2663 ### DEVELOPER RELATED:
2665 - Removed the unused function `write_int_named()`, the unused variable
2666 `io_read_phase`, and the rarely used variable `io_write_phase`. This also
2667 elides the confusing 'phase "unknown"' part of one error message.
2669 - Removed two unused configure checks and two related (also unused)
2670 compatibility functions.
2672 - The xattrs.diff patch received a security fix that prevents a potential
2673 buffer overflow in the `receive_xattr()` code.
2675 - The acls.diff patch has been improved quite a bit, with more to come.
2677 - A new patch was added: log-file.diff. This contains an early version of a
2678 future option, `--log-file=FILE`, that will allow any rsync to log its
2679 actions to a file (something that only a daemon supports at present).
2681 ------------------------------------------------------------------------------
2683 # NEWS for rsync 2.6.7 (11 Mar 2006)
2685 ## Changes in this version:
2689 - The letter 'D' in the itemized output was being used for both devices
2690 (character or block) as well as other special files (such as fifos and named
2691 sockets). This has changed to separate non-device special files under the
2692 'S' designation (e.g. `cS+++++++ path/fifo`). See also the `--specials`
2695 - The way rsync escapes unreadable characters has changed. First, rsync now
2696 has support for recognizing valid multi-byte character sequences in your
2697 current locale, allowing it to escape fewer characters than before for a
2698 locale such as UTF-8. Second, it now uses an escape idiom of `\#123`, which
2699 is the literal string `\#` followed by exactly 3 octal digits. Rsync no
2700 longer doubles a backslash character in a filename (e.g. it used to output
2701 `foo\\bar` when copying `foo\bar`) -- now it only escapes a backslash that
2702 is followed by a hash-sign and 3 digits (0-9) (e.g. it will output
2703 `foo\#134#789` when copying `foo\#789`). See also the `--8-bit-output`
2704 (`-8`) option, mentioned below.
2706 Script writers: the local rsync is the one that outputs escaped names, so if
2707 you need to support unescaping of filenames for older rsyncs, I'd suggest
2708 that you parse the output of `rsync --version` and only use the old
2709 unescaping rules for 2.6.5 and 2.6.6.
2713 - Fixed a really old bug that caused `--checksum` (`-c`) to checksum all the
2714 files encountered during the delete scan (ouch).
2716 - Fixed a potential hang in a remote generator: when the receiver gets a
2717 read-error on the socket, it now signals the generator about this so that
2718 the generator does not try to send any of the terminating error messages to
2719 the client (avoiding a potential hang in some setups).
2721 - Made hard-links work with symlinks and devices again.
2723 - If the sender gets an early EOF reading a source file, we propagate this
2724 error to the receiver so that it can discard the file and try requesting it
2725 again (which is the existing behavior for other kinds of read errors).
2727 - If a device-file/special-file changes permissions, rsync now updates the
2728 permissions without recreating the file.
2730 - If the user specifies a remote-host for both the source and destination, we
2731 now output a syntax error rather than trying to open the destination
2732 hostspec as a filename.
2734 - When `--inplace` creates a new destination file, rsync now creates it with
2735 permissions 0600 instead of 0000 -- this makes restarting possible when the
2736 transfer gets interrupted in the middle of sending a new file.
2738 - Reject the combination of `--inplace` and `--sparse` since the sparse-output
2739 algorithm doesn't work when overwriting existing data.
2741 - Fixed the directory name in the error that is output when `pop_dir()` fails.
2743 - Really fixed the parsing of a `!` entry in .cvsignore files this time.
2745 - If the generator gets a stat() error on a file, output it (this used to
2746 require at least `-vv` for the error to be seen).
2748 - If waitpid() fails or the child rsync didn't exit cleanly, we now handle the
2749 exit status properly and generate a better error.
2751 - Fixed some glitches in the double-verbose output when using `--copy-dest`,
2752 `--link-dest`, or `--compare-dest`. Also improved how the verbose output
2753 handles hard-links (within the transfer) that had an up-to-date alternate
2754 `dest` file, and copied files (via `--copy-dest`).
2756 - Fixed the matching of the dont-compress items (e.g. `*.gz`) against files
2757 that have a path component containing a slash.
2759 - If the code reading a filter/exclude file gets an EINTR error, rsync now
2760 clears the error flag on the file handle so it can keep on reading.
2762 - If `--relative` is active, the sending side cleans up trailing `/` or `/.`
2763 suffixes to avoid triggering a bug in older rsync versions. Also, we now
2764 reject a `..` dir if it would be sent as a relative dir.
2766 - If a non-directory is in the way of a directory and rsync is run with
2767 `--dry-run` and `--delete`, rsync no longer complains about not being able
2768 to opendir() the not-yet present directory.
2770 - When `--list-only` is used and a non-existent local destination dir was also
2771 specified as a destination, rsync no longer generates a warning about being
2772 unable to create the missing directory.
2774 - Fixed some problems with `--relative --no-implied-dirs` when the destination
2775 directory did not yet exist: we can now create a symlink or device when it
2776 is the first thing in the missing dir, and `--fuzzy` no longer complains
2777 about being unable to open the missing dir.
2779 - Fixed a bug where the `--copy-links` option would not affect implied
2780 directories without `--copy-unsafe-links` (see `--relative`).
2782 - Got rid of the need for `--force` to be used in some circumstances with
2783 `--delete-after` (making it consistent with
2784 `--delete-before`/`--delete-during`).
2786 - Rsync now ignores the SIGXFSZ signal, just in case your OS sends this when a
2787 file is too large (rsync handles the write error).
2789 - Fixed a bug in the Proxy-Authorization header's base64-encoded value: it was
2790 not properly padded with trailing '=' chars. This only affects a user that
2791 need to use a password-authenticated proxy for an outgoing daemon-rsync
2794 - If we're transferring an empty directory to a new name, rsync no longer
2795 forces `S_IWUSR` if it wasn't already set, nor does it accidentally leave it
2798 - Fixed a bug in the debug output (`-vvvvv`) that could mention the wrong
2799 checksum for the current file offset.
2801 - Rsync no longer allows a single directory to be copied over a non-directory
2806 - Added the `--append` option that makes rsync append data onto files that are
2807 longer on the source than the destination (this includes new files).
2809 - Added the `--min-size=SIZE` option to exclude small files from the transfer.
2811 - Added the `--compress-level` option to allow you to set how aggressive
2812 rsync's compression should be (this option implies `--compress`).
2814 - Enhanced the parsing of the SIZE value for `--min-size` and `--max-size` to
2815 allow easy entry of multiples of 1000 (instead of just multiples of 1024)
2816 and off-by-one values too (e.g. `--max-size=8mb-1`).
2818 - Added the `--8-bit-output` (`-8`) option, which tells rsync to avoid
2819 escaping high-bit characters that it thinks are unreadable in the current
2822 - The new option `--human-readable` (`-h`) changes the output of `--progress`,
2823 `--stats`, and the end-of-run summary to be easier to read. If repeated, the
2824 units become powers of 1024 instead of powers of 1000. (The old meaning of
2825 `-h`, as a shorthand for `--help`, still works as long as you just use it on
2826 its own, as in `rsync -h`.)
2828 - If lutimes() and/or lchmod() are around, use them to allow the preservation
2829 of attributes on symlinks.
2831 - The `--link-dest` option now affects symlinks and devices (when possible).
2833 - Added two config items to the rsyncd.conf parsing: `pre-xfer exec` and
2834 `post-xfer exec`. These allow a command to be specified on a per-module
2835 basis that will be run before and/or after a daemon-mode transfer. (See the
2836 manpage for a list of the environment variables that are set with
2837 information about the transfer.)
2839 - When using the `--relative` option, you can now insert a dot dir in the
2840 source path to indicate where the replication of the source dirs should
2841 start. For example, if you specify a source path of
2842 rsync://host/module/foo/bar/./baz/dir with `-R`, rsync will now only
2843 replicate the `baz/dir` part of the source path (note: a trailing dot dir is
2844 unaffected unless it also has a trailing slash).
2846 - Added some new `--no-FOO` options that make it easier to override unwanted
2847 implied or default options. For example, `-a --no-o` (aka `--archive
2848 --no-owner`) can be used to turn off the preservation of file ownership that
2851 - Added the `--chmod=MODE` option that allows the destination permissions to
2852 be changed from the source permissions. E.g. `--chmod=g+w,o-rwx`
2854 - Added the `incoming chmod` and `outgoing chmod` daemon options that allow a
2855 module to specify what permissions changes should be applied to all files
2856 copied to and from the daemon.
2858 - Allow the `--temp-dir` option to be specified when starting a daemon, which
2859 sets the default temporary directory for incoming files.
2861 - If `--delete` is combined with `--dirs` without `--recursive`, rsync will
2862 now delete in any directory whose content is being synchronized.
2864 - If `--backup` is combined with `--delete` without `--backup-dir` (and
2865 without `--delete-excluded`), we add a `protect` filter-rule to ensure that
2866 files with the backup suffix are not deleted.
2868 - The file-count stats that are output by `--progress` were improved to better
2869 indicate what the numbers mean. For instance, the output: `(xfer#5,
2870 to-check=8383/9999)` indicates that this was the fifth file to be
2871 transferred, and we still need to check 8383 more files out of a total of
2874 - The include/exclude code now allows a `dir/***` directive (with 3 trailing
2875 stars) to match both the dir itself as well as all the content below the dir
2876 (`dir/**` would not match the dir).
2878 - Added the `--prune-empty-dirs` (`-m`) option that makes the receiving rsync
2879 discard empty chains of directories from the file-list. This makes it easier
2880 to selectively copy files from a source hierarchy and end up with just the
2881 directories needed to hold the resulting files.
2883 - If the `--itemize-changes` (`-i`) option is repeated, rsync now includes
2884 unchanged files in the itemized output (similar to `-vv`, but without all
2885 the other verbose messages that can get in the way). Of course, the client
2886 must be version 2.6.7 for this to work, but the remote rsync only needs to
2887 be 2.6.7 if you're pushing files.
2889 - Added the `--specials` option to tell rsync to copy non-device special files
2890 (which rsync now attempts even as a normal user). The `--devices` option now
2891 requests the copying of just devices (character and block). The `-D` option
2892 still requests both (e.g. `--devices` and `--specials`), `-a` still implies
2893 `-D`, and non-root users still get a silent downgrade that omits device
2896 - Added the `--super` option to make the receiver always attempt super-user
2897 activities. This is useful for systems that allow things such as devices to
2898 be created or ownership to be set without being UID 0, and is also useful
2899 for someone who wants to ensure that errors will be output if the receiving
2900 rsync isn't being run as root.
2902 - Added the `--sockopts` option for those few who want to customize the TCP
2903 options used to contact a daemon rsync.
2905 - Added a way for the `--temp-dir` option to be combined with a partial-dir
2906 setting that lets rsync avoid non-atomic updates (for those times when
2907 `--temp-dir` is not being used because space is tight).
2909 - A new support script, files-to-excludes, will transform a list of files into
2910 a set of include/exclude directives that will copy those files.
2912 - A new option, `--executability` (`-E`) can be used to preserve just the
2913 execute bit on files, for those times when using the `--perms` option is not
2916 - The daemon now logs each connection and also each module-list request that
2919 - New log-format options: %M (modtime), %U (uid), %G (gid), and %B (permission
2920 bits, e.g. `rwxr-xrwt`).
2922 - The `--dry-run` option no longer forces the enabling of `--verbose`.
2924 - The `--remove-sent-files` option now does a better job of incrementally
2925 removing the sent files on the sending side (older versions tended to clump
2926 up all the removals at the end).
2928 - A daemon now supersedes its minimal SIGCHLD handler with the standard
2929 PID-remembering version after forking. This ensures that the generator can
2930 get the child-exit status from the receiver.
2932 - Use of the `--bwlimit` option no longer interferes with the remote rsync
2933 sending error messages about invalid/refused options.
2935 - Rsync no longer returns a usage error when used with one local source arg
2936 and no destination: this now implies the `--list-only` option, just like the
2937 comparable situation with a remote source arg.
2939 - Added the `--copy-dirlinks` option, a more limited version of
2942 - Various documentation improvements, including: a better synopsis, some
2943 improved examples, a better discussion of the presence and absence of
2944 `--perms` (including how it interacts with the new `--executability` and
2945 `--chmod` options), an extended discussion of `--temp-dir`, an improved
2946 discussion of `--partial-dir`, a better description of rsync's pattern
2947 matching characters, an improved `--no-implied-dirs` section, and the
2948 documenting of what the `--stats` option outputs.
2950 - Various new and updated diffs in the patches dir, including: acls.diff,
2951 xattrs.diff, atimes.diff, detect-renamed.diff, and slp.diff.
2955 - We now use sigaction() and sigprocmask() if possible, and fall back on
2956 signal() if not. Using sigprocmask() ensures that rsync enables all the
2957 signals that it needs, just in case it was started in a masked state.
2959 - Some buffer sizes were expanded a bit, particularly on systems where
2960 MAXPATHLEN is overly small (e.g. Cygwin).
2962 - If `io_printf()` tries to format more data than fits in the buffer, exit
2963 with an error instead of transmitting a truncated buffer.
2965 - If a `va_copy` macro is defined, lib/snprintf.c will use it when defining
2966 the `VA_COPY` macro.
2968 - Reduced the amount of stack memory needed for each level of directory
2969 recursion by nearly MAXPATHLEN bytes.
2971 - The wildmatch function was extended to allow an array of strings to be
2972 supplied as the string to match. This allows the exclude code to do less
2975 - Got rid of the `safe_fname()` function (and all the myriad calls) and
2976 replaced it with a new function in the log.c code that filters all the
2977 output going to the terminal.
2979 - Unified the `f_name()` and the `f_name_to()` functions.
2981 - Improved the hash-table code the sender uses to handle checksums to make it
2982 use slightly less memory and run just a little faster.
2984 ### DEVELOPER RELATED:
2986 - The diffs in the patches dir now require `patch -p1 <DIFF` instead of the
2987 previous `-p0`. Also, the version included in the release tar now affect
2988 generated files (e.g. configure, rsync.1, proto.h, etc.), so it is no longer
2989 necessary to run autoconf and/or yodl unless you're applying a patch that
2990 was checked out from CVS.
2992 - Several diffs in the patches dir now use the proper `--enable-FOO` configure
2993 option instead of `--with-FOO` to turn on the inclusion of the newly patched
2996 - There is a new script, `prepare-source` than can be used to update the
2997 various generated files (proto.h, configure, etc.) even before configure has
2998 created the Makefile (this is mainly useful when patching the source with a
2999 patch that doesn't affect generated files).
3001 - The testsuite now sets HOME so that it won't be affected by a file such as
3004 ------------------------------------------------------------------------------
3006 # NEWS for rsync 2.6.6 (28 Jul 2005)
3008 ## Changes in this version:
3012 - The zlib code was upgraded to version 1.2.3 in order to make it more secure.
3013 While the widely-publicized security problem in zlib 1.2.2 did not affect
3014 rsync, another security problem surfaced that affects rsync's zlib 1.1.4.
3018 - The setting of `flist->high` in `clean_flist()` was wrong for an empty list.
3019 This could cause `flist_find()` to crash in certain rare circumstances (e.g.
3020 if just the right directory setup was around when `--fuzzy` was combined
3021 with `--link-dest`).
3023 - The outputting of hard-linked files when verbosity was > 1 was not right:
3024 (1) Without `-i` it would output the name of each hard-linked file as though
3025 it had been changed; it now outputs a `is hard linked` message for the file.
3026 (2) With `-i` it would output all dots for the unchanged attributes of a
3027 hard-link; it now changes those dots to spaces, as is done for other totally
3030 - When backing up a changed symlink or device, get rid of any old backup item
3031 so that we don't get an `already exists` error.
3033 - A couple places that were comparing a local and a remote modification-time
3034 were not honoring the `--modify-window` option.
3036 - Fixed a bug where the 'p' (permissions) itemized-changes flag might get set
3037 too often (if some non-significant mode bits differed).
3039 - Fixed a really old, minor bug that could cause rsync to warn about being
3040 unable to mkdir() a path that ends in `/.` because it just created the
3041 directory (required `--relative`, `--no-implied-dirs`, a source path that
3042 ended in either a trailing slash or a trailing `/.`, and a non-existing
3043 destination dir to tickle the bug in a recent version).
3047 - Made the `max verbosity` setting in the rsyncd.conf file settable on a
3048 per-module basis (which now matches the documentation).
3050 - The rrsync script has been upgraded to verify the args of options that take
3051 args (instead of rejecting any such options). It was also changed to try to
3052 be more secure and to fix a problem in the parsing of a pull operation that
3053 has multiple source args. (See the support dir.)
3055 - Improved the documentation that explains the difference between a normal
3056 daemon transfer and a daemon-over remote-shell transfer.
3058 - Some of the diffs supplied in the patches dir were fixed and/or improved.
3062 - Made configure define `NOBODY_USER` (currently hard-wired to `nobody`) and
3063 `NOBODY_GROUP` (set to either `nobody` or `nogroup` depending on what we
3064 find in the /etc/group file).
3066 - Added a test to the test suite, itemized.test, that tests the output of `-i`
3067 (log-format w/%i) and some double-verbose messages.
3069 ------------------------------------------------------------------------------
3071 # NEWS for rsync 2.6.5 (1 Jun 2005)
3073 ## Changes in this version:
3077 - Non-printable chars in filenames are now output using backslash-escaped
3078 characters rather than '?'s. Any non-printable character is output using 3
3079 digits of octal (e.g. `\n` -> `\012`), and a backslash is now output as
3080 `\\`. Rsync also uses your locale setting, which can make it treat fewer
3081 high-bit characters as non-printable.
3083 - If rsync received an empty file-list when pulling files, it would output a
3084 `nothing to do` message and exit with a 0 (success) exit status, even if the
3085 remote rsync returned an error (it did not do this under the same conditions
3086 when pushing files). This was changed to make the pulling behavior the same
3087 as the pushing behavior: we now do the normal end-of-run outputting
3088 (depending on options) and exit with the appropriate exit status.
3092 - A crash bug was fixed when a daemon had its `path` set to `/`, did not have
3093 chroot enabled, and used some anchored excludes in the rsyncd.conf file.
3095 - Fixed a bug in the transfer of a single file when `-H` is specified (rsync
3096 would either infinite loop or perhaps crash).
3098 - Fixed a case where the generator might try (and fail) to tweak the
3099 write-permissions of a read-only directory in list-only mode (this only
3100 caused an annoying warning message).
3102 - If `--compare-dest` or `--link-dest` uses a locally-copied file as the basis
3103 for an updated version, log this better when `--verbose` or `-i` is in
3106 - Fixed the accidental disabling of `--backup` during the `--delete-after`
3109 - Restored the ability to use the `--address` option in client mode (in
3110 addition to its use in daemon mode).
3112 - Make sure that some temporary progress information from the delete
3113 processing does not get left on the screen when it is followed by a newline.
3115 - When `--existing` skips a directory with extra verbosity, refer to it as a
3116 `directory`, not a `file`.
3118 - When transferring a single file to a different-named file, any generator
3119 messages that are source-file related no longer refer to the file by the
3120 destination filename.
3122 - Fixed a bug where hard-linking a group of files might fail if the generator
3123 hasn't created a needed destination directory yet.
3125 - Fixed a bug where a hard-linked group of files that is newly-linked to a
3126 file in a `--link-dest` dir doesn't link the files from the rest of the
3129 - When deleting files with the `--one-file-system` (`-x`) option set, rsync no
3130 longer tries to remove files from inside a mount-point on the receiving
3131 side. Also, we don't complain about being unable to remove the mount-point
3134 - Fixed a compatibility problem when using `--cvs-ignore` (`-C`) and sending
3135 files to an older rsync without using `--delete`.
3137 - Make sure that a `- !` or `+ !` include/exclude pattern does not trigger the
3138 list-clearing action that is reserved for `!`.
3140 - Avoid a timeout in the generator when the sender/receiver aren't handling
3141 the generator's checksum output quickly enough.
3143 - Fixed the omission of some directories in the delete processing when
3144 `--relative` (`-R`) was combined with a source path that had a trailing
3147 - Fixed a case where rsync would erroneously delete some files and then
3148 re-transfer them when the options `--relative` (`-R`) and `--recursive`
3149 (`-r`) were both enabled (along with `--delete`) and a source path had a
3152 - Make sure that `--max-size` doesn't affect a device or a symlink.
3154 - Make sure that a system with a really small MAXPATHLEN does not cause the
3155 buffers in `readfd_unbuffered()` to be too small to receive normal messages.
3156 (This mainly affected Cygwin.)
3158 - If a source pathname ends with a filename of `..`, treat it as if `../` had
3159 been specified (so that we don't copy files to the parent dir of the
3162 - If `--delete` is combined with a file-listing rsync command (i.e. no
3163 transfer is happening), avoid outputting a warning that we couldn't delete
3166 - If `--stats` is specified with `--delete-after`, ensure that all the
3167 `deleting` messages are output before the statistics.
3169 - Improved one `if` in the deletion code that was only checking errno for
3170 ENOTEMPTY when it should have also been checking for EEXIST (for
3171 compatibility with OS variations).
3175 - Added the `--only-write-batch=FILE` option that may be used (instead of
3176 `--write-batch=FILE`) to create a batch file without doing any actual
3177 updating of the destination. This allows you to divert all the file-updating
3178 data away from a slow data link (as long as you are pushing the data to the
3179 remote server when creating the batch).
3181 - When the generator is taking a long time to fill up its output buffer (e.g.
3182 if the transferred files are few, small, or missing), it now periodically
3183 flushes the output buffer so that the sender/receiver can get started on the
3184 files sooner rather than later.
3186 - Improved the keep-alive code to handle a long silence between the sender and
3187 the receiver that can occur when the sender is receiving the checksum data
3190 - Improved the auth-errors that are logged by the daemon to include some
3191 information on why the authorization failed: wrong user, password mismatch,
3192 etc. (The client-visible message is unchanged!)
3194 - Improved the client's handling of an `@ERROR` from a daemon so that it does
3195 not complain about an unexpectedly closed socket (since we really did expect
3196 the socket to close).
3198 - If the daemon can't open the log-file specified in rsyncd.conf, fall back to
3199 using syslog and log an appropriate warning. This is better than what was
3200 typically a totally silent (and fatal) failure (since a daemon is not
3201 usually run with the `--no-detach` option that was necessary to see the
3204 - The manpages now consistently refer to an rsync daemon as a `daemon`
3205 instead of a `server` (to distinguish it from the server process in a
3206 non-daemon transfer).
3208 - Made a small change to the rrsync script (restricted rsync -- in the support
3209 dir) to make a read-only server reject all `--remove-*` options when sending
3210 files (to future-proof it against the possibility of other similar options
3211 being added at some point).
3215 - Rsync now calls `setlocale(LC_CTYPE, "")`. This enables isprint() to better
3216 discern which filename characters need to be escaped in messages (which
3217 should result in fewer escaped characters in some locales).
3219 - Improved the naming of the log-file open/reopen/close functions.
3221 - Removed some protocol-compatibility code that was only needed to help
3222 someone running a pre-release of 2.6.4.
3226 - Added configure option `--disable-locale` to disable any use of setlocale()
3229 - Fixed a bug in the `SUPPORT{,_HARD}_LINKS` #defines which prevented rsync
3230 from being built without symlink or hard-link support.
3232 - Only #define `HAVE_REMSH` if it is going to be set to 1.
3234 - Configure now disables the use of mkstemp() under HP-UX (since they refuse
3235 to fix its broken handling of large files).
3237 - Configure now explicitly checks for the lseek64() function so that the code
3238 can use `HAVE_LSEEK64` instead of inferring lseek64()'s presence based on
3239 the presence of the `off64_t` type.
3241 - Configure no longer mentions the change in the default remote-shell (from
3242 rsh to ssh) that occurred for the 2.6.0 release.
3244 - Some minor enhancements to the test scripts.
3246 - Added a few new `*.diff` files to the patches dir, including a patch that
3247 enables the optional copying of extended attributes.
3249 ------------------------------------------------------------------------------
3251 # NEWS for rsync 2.6.4 (30 March 2005)
3253 ## Changes in this version:
3255 ### PROTOCOL NUMBER:
3257 - The protocol number was changed to 29.
3261 - When rsync deletes a directory and outputs a verbose message about it, it
3262 now appends a trailing slash to the name instead of (only sometimes)
3263 outputting a preceding "directory " string.
3265 - The `--stats` output will contain file-list time-statistics if both sides
3266 are 2.6.4, or if the local side is 2.6.4 and the files are being pushed
3267 (since the stats come from the sending side). (Requires protocol 29 for a
3270 - The `%o` (operation) log-format escape now has a third value (besides `send`
3271 and `recv`): `del.` (with trailing dot to make it 4 chars). This changes
3272 the way deletions are logged in the daemon's log file.
3274 - When the `--log-format` option is combined with `--verbose`, rsync now
3275 avoids outputting the name of the file twice in most circumstances. As long
3276 as the `--log-format` item does not refer to any post-transfer items (such
3277 as %b or %c), the `--log-format` message is output prior to the transfer, so
3278 `--verbose` is now the equivalent of a `--log-format` of '%n%L' (which
3279 outputs the name and any link info). If the log output must occur after the
3280 transfer to be complete, the only time the name is also output prior to the
3281 transfer is when `--progress` was specified (so that the name will precede
3282 the progress stats, and the full `--log-format` output will come after).
3284 - Non-printable characters in filenames are replaced with a '?' to avoid
3285 corrupting the screen or generating empty lines in the output.
3289 - Restore the list-clearing behavior of `!` in a .cvsignore file (2.6.3 was
3290 only treating it as a special token in an rsync include/exclude file).
3292 - The combination of `--verbose` and `--dry-run` now mentions the full list of
3293 changes that would be output without `--dry-run`.
3295 - Avoid a mkdir warning when removing a directory in the destination that
3296 already exists in the `--backup-dir`.
3298 - An OS that has a binary mode for its files (such as Cygwin) needed
3299 `setmode(fd, O_BINARY)` called on the temp-file we opened with mkstemp().
3300 (Fix derived from Cygwin's 2.6.3 rsync package.)
3302 - Fixed a potential hang when verbosity is high, the client side is the
3303 sender, and the file-list is large.
3305 - Fixed a potential protocol-corrupting bug where the generator could merge a
3306 message from the receiver into the middle of a multiplexed packet of data if
3307 only part of that data had been written out to the socket when the message
3308 from the generator arrived.
3310 - We now check if the OS doesn't support using mknod() for creating FIFOs and
3311 sockets, and compile-in some compatibility code using mkfifo() and socket()
3314 - Fixed an off-by-one error in the handling of `--max-delete=N`. Also, if the
3315 `--max-delete` limit is exceeded during a run, we now output a warning about
3316 this at the end of the run and exit with a new error code (25).
3318 - One place in the code wasn't checking if fork() failed.
3320 - The `ignore nonreadable` daemon parameter used to erroneously affect
3321 readable symlinks that pointed to a non-existent file.
3323 - If the OS does not have lchown() and a chown() of a symlink will affect the
3324 referent of a symlink (as it should), we no longer try to set the user and
3327 - The generator now properly runs the hard-link loop and the dir-time
3328 rewriting loop after we're sure that the redo phase is complete.
3330 - When `--backup` was specified with `--partial-dir=DIR`, where DIR is a
3331 relative path, the backup code was erroneously trying to backup a file that
3332 was put into the partial-dir.
3334 - If a file gets resent in a single transfer and the `--backup` option is
3335 enabled along with `--inplace`, rsync no longer performs a duplicate backup
3336 (it used to overwrite the first backup with the failed file).
3338 - One call to `flush_write_file()` was not being checked for an error.
3340 - The `--no-relative` option was not being sent from the client to a server
3343 - If an rsync daemon specified `dont compress = ...` for a file and the client
3344 tried to specify `--compress`, the libz code was not handling a compression
3345 level of 0 properly. This could cause a transfer failure if the block-size
3346 for a file was large enough (e.g. rsync might have exited with an error for
3349 - Fixed a bug that would sometimes surface when using `--compress` and sending
3350 a file with a block-size larger than 64K (either manually specified, or
3351 computed due to the file being really large). Prior versions of rsync would
3352 sometimes fail to decompress the data properly, and thus the transferred
3353 file would fail its verification.
3355 - If a daemon can't open the specified log file (i.e. syslog is not being
3356 used), die without crashing. We also output an error about the failure on
3357 stderr (which will only be seen if `--no-detach` was specified) and exit
3358 with a new error code (6).
3360 - A local transfer no longer duplicates all its include/exclude options (since
3361 the forked process already has a copy of the exclude list, there's no need
3362 to send them a set of duplicates).
3364 - The output of the items that are being updated by the generator (dirs,
3365 symlinks, devices) is now intermingled in the proper order with the output
3366 from the items that the receiver is updating (regular files) when pulling.
3367 This misordering was particularly bad when `--progress` was specified.
3368 (Requires protocol 29.)
3370 - When `--timeout` is specified, lulls that occur in the transfer while the
3371 generator is doing work that does not generate socket traffic (looking for
3372 changed files, deleting files, doing directory-time touch-ups, etc.) will
3373 cause a new keep-alive packet to be sent that should keep the transfer going
3374 as long as the generator continues to make progress. (Requires protocol 29.)
3376 - The stat size of a device is not added to the total file size of the items
3377 in the transfer (the size might be undefined on some OSes).
3379 - Fixed a problem with refused-option messages sometimes not making it back to
3380 the client side when a remote `--files-from` was in effect and the daemon
3383 - The `--compare-dest` option was not updating a file that differed in (the
3384 preserved) attributes from the version in the compare-dest DIR.
3386 - When rsync is copying files into a write-protected directory, fixed the
3387 change-report output for the directory so that we don't report an identical
3388 directory as changed.
3392 - Rsync now supports popt's option aliases, which means that you can use
3393 /etc/popt and/or ~/.popt to create your own option aliases.
3395 - Added the `--delete-during` (`--del`) option which will delete files from
3396 the receiving side incrementally as each directory in the transfer is being
3397 processed. This makes it more efficient than the default,
3398 before-the-transfer behavior, which is now also available as
3399 `--delete-before` (and is still the default `--delete-WHEN` option that will
3400 be chosen if `--delete` or `--delete-excluded` is specified without a
3401 `--delete-WHEN` choice). All the `--del*` options infer `--delete`, so an
3402 rsync daemon that refuses `delete` will still refuse to allow any
3403 file-deleting options (including the new `--remove-sent-files` option).
3405 - All the `--delete-WHEN` options are now more memory efficient: Previously an
3406 duplicate set of file-list objects was created on the receiving side for the
3407 entire destination hierarchy. The new algorithm only creates one directory
3408 of objects at a time (for files inside the transfer).
3410 - Added the `--copy-dest` option, which works like `--link-dest` except that
3411 it locally copies identical files instead of hard-linking them.
3413 - Added support for specifying multiple `--compare-dest`, `--copy-dest`, or
3414 `--link-dest` options, but only of a single type. (Promoted from the patches
3415 dir and enhanced.) (Requires protocol 29.)
3417 - Added the `--max-size` option. (Promoted from the patches dir.)
3419 - The daemon-mode options are now separated from the normal rsync options so
3420 that they can't be mixed together. This makes it impossible to start a
3421 daemon that has improper default option values (which could cause problems
3422 when a client connects, such as hanging or crashing).
3424 - The `--bwlimit` option may now be used in combination with `--daemon` to
3425 specify both a default value for the daemon side and a value that cannot be
3426 exceeded by a user-specified `--bwlimit` option.
3428 - Added the `port` parameter to the rsyncd.conf file. (Promoted from the
3429 patches dir.) Also added `address`. The command-line options take precedence
3430 over a config-file option, as expected.
3432 - In `_exit_cleanup()`: when we are exiting with a partially-received file, we
3433 now flush any data in the write-cache before closing the partial file.
3435 - The `--inplace` support was enhanced to work with `--compare-dest`,
3436 `--link-dest`, and (the new) `--copy-dest` options. (Requires protocol 29.)
3438 - Added the `--dirs` (`-d`) option for an easier way to copy directories
3439 without recursion. Any directories that are encountered are created on the
3440 destination. Specifying a directory with a trailing slash copies its
3441 immediate contents to the destination.
3443 - The `--files-from` option now implies `--dirs` (`-d`).
3445 - Added the `--list-only` option, which is mainly a way for the client to put
3446 the server into listing mode without needing to resort to any internal
3447 option kluges (e.g. the age-old use of `-r --exclude='/*/*'` for a
3448 non-recursive listing). This option is used automatically (behind the
3449 scenes) when a modern rsync speaks to a modern daemon, but may also be
3450 specified manually if you want to force the use of the `--list-only` option
3451 over a remote-shell connection.
3453 - Added the `--omit-dir-times` (`-O`) option, which will avoid updating the
3454 modified time for directories when `--times` was specified. This option will
3455 avoid an extra pass through the file-list at the end of the transfer (to
3456 tweak all the directory times), which may provide an appreciable speedup for
3457 a really large transfer. (Promoted from the patches dir.)
3459 - Added the `--filter` (`-f`) option and its helper option, `-F`. Filter rules
3460 are an extension to the existing include/exclude handling that also supports
3461 nested filter files as well as per-directory filter files (like .cvsignore,
3462 but with full filter-rule parsing). This new option was chosen in order to
3463 ensure that all existing include/exclude processing remained 100% compatible
3464 with older versions. Protocol 29 is needed for full filter-rule support, but
3465 backward-compatible rules work with earlier protocol versions. (Promoted
3466 from the patches dir and enhanced.)
3468 - Added the `--delay-updates` option that puts all updated files into a
3469 temporary directory (by default `.~tmp~`, but settable via the
3470 `--partial-dir=DIR` option) until the end of the transfer. This makes the
3471 updates a little more atomic for a large transfer.
3473 - If rsync is put into the background, any output from `--progress` is
3476 - Documented the `max verbosity` setting for rsyncd.conf. (This setting was
3477 added a couple releases ago, but left undocumented.)
3479 - The sender and the generator now double-check the file-list index they are
3480 given, and refuse to try to do a file transfer on a non-file index (since
3481 that would indicate that something had gone very wrong).
3483 - Added the `--itemize-changes` (`-i`) option, which is a way to output a more
3484 detailed list of what files changed and in what way. The effect is the same
3485 as specifying a `--log-format` of `%i %n%L` (see both the rsync and
3486 rsyncd.conf manpages). Works with `--dry-run` too.
3488 - Added the `--fuzzy` (`-y`) option, which attempts to find a basis file for a
3489 file that is being created from scratch. The current algorithm only looks in
3490 the destination directory for the created file, but it does attempt to find
3491 a match based on size/mod-time (in case the file was renamed with no other
3492 changes) as well as based on a fuzzy name-matching algorithm. This option
3493 requires protocol 29 because it needs the new file-sorting order. (Promoted
3494 from patches dir and enhanced.) (Requires protocol 29.)
3496 - Added the `--remove-sent-files` option, which lets you move files between
3499 - The hostname in HOST:PATH or HOST::PATH may now be an IPv6 literal enclosed
3500 in '[' and ']' (e.g. `[::1]`). (We already allowed IPv6 literals in the
3501 rsync://HOST:PORT/PATH format.)
3503 - When rsync recurses to build the file list, it no longer keeps open one or
3504 more directory handles from the dir's parent dirs.
3506 - When building under windows, the default for `--daemon` is now to avoid
3507 detaching, requiring the new `--detach` option to force rsync to detach.
3509 - The `--dry-run` option can now be combined with either `--write-batch` or
3510 `--read-batch`, allowing you to run a do-nothing test command to see what
3511 would happen without `--dry-run`.
3513 - The daemon's `read only` config item now sets an internal `read_only`
3514 variable that makes extra sure that no write/delete calls on the read-only
3517 - The log-format % escapes can now have a numeric field width in between the %
3518 and the escape letter (e.g. `%-40n %08p`).
3520 - Improved the option descriptions in the `--help` text.
3524 - Added atomic-rsync to the support dir: a perl script that will transfer some
3525 files using rsync, and then move the updated files into place all at once at
3526 the end of the transfer. Only works when pulling, and uses `--link-dest` and
3527 a parallel hierarchy of files to effect its update.
3529 - Added mnt-excl to the support dir: a perl script that takes the /proc/mounts
3530 file and translates it into a set of excludes that will exclude all mount
3531 points (even mapped mounts to the same disk). The excludes are made relative
3532 to the specified source dir and properly anchored.
3534 - Added savetransfer.c to the support dir: a C program that can make a copy of
3535 all the data that flows over the wire. This lets you test for data
3536 corruption (by saving the data on both the sending side and the receiving
3537 side) and provides one way to debug a protocol error.
3539 - Added rrsync to the support dir: this is an updated version of Joe Smith's
3540 restricted rsync perl script. This helps to ensure that only certain rsync
3541 commands can be run by an ssh invocation.
3545 - Added better checking of the checksum-header values that come over the
3548 - Merged a variety of file-deleting functions into a single function so that
3549 it is easier to maintain.
3551 - Improved the type of some variables (particularly blocksize vars) for
3552 consistency and proper size.
3554 - Got rid of the uint64 type (which we didn't need).
3556 - Use a slightly more compatible set of core #include directives.
3558 - Defined int32 in a way that ensures that the build dies if we can't find a
3559 variable with at least 32 bits.
3561 ### PROTOCOL DIFFERENCES FOR VERSION 29:
3563 - A 16-bit flag-word is transmitted after every file-list index. This
3564 indicates what is changing between the sender and the receiver. The
3565 generator now transmits an index and a flag-word to indicate when dirs and
3566 symlinks have changed (instead of producing a message), which makes the
3567 outputting of the information more consistent and less prone to screen
3568 corruption (because the local receiver/sender is now outputting all the
3569 file-change info messages).
3571 - If a file is being hard-linked, the `ITEM_XNAME_FOLLOWS` bit is enabled in
3572 the flag-word and the name of the file that was linked immediately follows
3573 in vstring format (see below).
3575 - If a file is being transferred with an alternate-basis file, the
3576 `ITEM_BASIS_TYPE_FOLLOWS` bit is enabled in the flag-word and a single byte
3577 follows, indicating what type of basis file was chosen. If that indicates
3578 that a fuzzy-match was selected, the `ITEM_XNAME_FOLLOWS` bit is set in the
3579 flag-word and the name of the match in vstring format follows the basis
3580 byte. A vstring is a variable length string that has its size written prior
3581 to the string, and no terminating null. If the string is from 1-127 bytes,
3582 the length is a single byte. If it is from 128-32767 bytes, the length is
3583 written as ((len >> 8) | 0x80) followed by (len % 0x100).
3585 - The sending of exclude names is done using filter-rule syntax. This means
3586 that all names have a prefixed rule indicator, even excludes (which used to
3587 be sent as a bare pattern, when possible). The `-C` option will include the
3588 per-dir .cvsignore merge file in the list of filter rules so it is
3589 positioned correctly (unlike in some older transfer scenarios).
3591 - Rsync sorts the filename list in a different way: it sorts the subdir names
3592 after the non-subdir names for each dir's contents, and it always puts a
3593 dir's contents immediately after the dir's name in the list. (Previously an
3594 item named `foo.txt` would sort in between directory `foo/` and `foo/bar`.)
3596 - When talking to a protocol 29 rsync daemon, a list-only request is able to
3597 note this before the options are sent over the wire and the new
3598 `--list-only` option is included in the options.
3600 - When the `--stats` bytes are sent over the wire (or stored in a batch), they
3601 now include two elapsed-time values: one for how long it took to build the
3602 file-list, and one for how long it took to send it over the wire (each
3603 expressed in thousandths of a second).
3605 - When `--delete-excluded` is specified with some filter rules (AKA excludes),
3606 a client sender will now initiate a send of the rules to the receiver (older
3607 protocols used to omit the sending of excludes in this situation since there
3608 were no receiver-specific rules that survived `--delete-excluded` back
3609 then). Note that, as with all the filter-list sending, only items that are
3610 significant to the other side will actually be sent over the wire, so the
3611 filter-rule list that is sent in this scenario is often empty.
3613 - An index equal to the file-list count is sent as a keep-alive packet from
3614 the generator to the sender, which then forwards it on to the receiver. This
3615 normally invalid index is only a valid keep-alive packet if the 16-bit
3616 flag-word that follows it contains a single bit (`ITEM_IS_NEW`, which is
3617 normally an illegal flag to appear alone).
3619 - A protocol-29 batch file includes a bit for the setting of the `--dirs`
3620 option and for the setting of the `--compress` option. Also, the shell
3621 script created by `--write-batch` will use the `--filter` option instead of
3622 `--exclude-from` to capture any filter rules.
3626 - Handle an operating system that use mkdev() in place of makedev().
3628 - Improved configure to better handle cross-compiling.
3630 ------------------------------------------------------------------------------
3632 # NEWS for rsync 2.6.3 (30 Sep 2004)
3634 ## Changes in this version:
3638 - A bug in the `sanitize_path` routine (which affects a non-chrooted rsync
3639 daemon) could allow a user to craft a pathname that would get transformed
3640 into an absolute path for certain options (but not for file-transfer names).
3641 If you're running an rsync daemon with chroot disabled, **please upgrade**,
3642 ESPECIALLY if the user privs you run rsync under is anything above `nobody`.
3644 OUTPUT CHANGES (ATTN: those using a script to parse the verbose output):
3646 - Please note that the 2-line footer (output when verbose) now uses the term
3647 `sent` instead of `wrote` and `received` instead of `read`. If you are not
3648 parsing the numeric values out of this footer, a script would be better off
3649 using the empty line prior to the footer as the indicator that the verbose
3652 - The output from the `--stats` option was similarly affected to change
3653 `written` to `sent` and `read` to `received`.
3655 - Rsync ensures that a filename that contains a newline gets mentioned with
3656 each newline transformed into a question mark (which prevents a filename
3657 from causing an empty line to be output).
3659 - The `backed up ...` message that is output when at least 2 `--verbose`
3660 options are specified is now the same both with and without the
3661 `--backup-dir` option.
3665 - Fixed a crash bug that might appear when `--delete` was used and multiple
3666 source directories were specified.
3668 - Fixed a 32-bit truncation of the file length when generating the checksums.
3670 - The `--backup` code no longer attempts to create some directories over and
3671 over again (generating warnings along the way).
3673 - Fixed a bug in the reading of the secrets file (by the daemon) and the
3674 password file (by the client): the files no longer need to be terminated by
3675 a newline for their content to be read in.
3677 - If a file has a read error on the sending side or the reconstructed data
3678 doesn't match the expected checksum (perhaps due to the basis file changing
3679 during the transfer), the receiver will no longer retain the resulting file
3680 unless the `--partial` option was specified. (Note: for the read-error
3681 detection to work, neither side can be older than 2.6.3 -- older receivers
3682 will always retain the file, and older senders don't tell the receiver that
3683 the file had a read error.)
3685 - If a file gets resent in a single transfer and the `--backup` option is
3686 enabled, rsync no longer performs a duplicate backup (it used to overwrite
3687 the original file in the backup area).
3689 - Files specified in the daemon's `exclude` or `exclude from` config items are
3690 now excluded from being uploaded (assuming that the module allows uploading
3691 at all) in addition to the old download exclusion.
3693 - Got rid of a potential hang in the receiver when near the end of a phase.
3695 - When using `--backup` without a `--backup-dir`, rsync no longer preserves
3696 the modify time on directories. This avoids confusing NFS.
3698 - When `--copy-links` (`-L`) is specified, we now output a separate error for
3699 a symlink that has no referent instead of claiming that a file `vanished`.
3701 - The `--copy-links` (`-L`) option no longer has the side-effect of telling
3702 the receiving side to follow symlinks. See the `--keep-dirlinks` option
3703 (mentioned below) for a way to specify that behavior.
3705 - Error messages from the daemon server's option-parsing (such as refused
3706 options) are now successfully transferred back to the client (the server
3707 used to fail to send the message because the socket wasn't in the right
3708 state for the message to get through).
3710 - Most transfer errors that occur during a daemon transfer are now returned to
3711 the user in addition to being logged (some messages are intended to be
3712 daemon-only and are not affected by this).
3714 - Fixed a bug in the daemon authentication code when using one of the
3715 batch-processing options.
3717 - We try to work around some buggy IPv6 implementations that fail to implement
3718 `IPV6_V6ONLY`. This should fix the `address in use` error that some daemons
3719 get when running on an OS with a buggy IPv6 implementation. Also, if the new
3720 code gets this error, we might suggest that the user specify `--ipv4` or
3721 `--ipv6` (if we think it will help).
3723 - When the remote rsync dies, make a better effort to recover any error
3724 messages it may have sent before dying (the local rsync used to just die
3725 with a socket-write error).
3727 - When using `--delete` and a `--backup-dir` that contains files that are
3728 hard-linked to their destination equivalents, rsync now makes sure that
3729 removed files really get removed (avoids a really weird rename() behavior).
3731 - Avoid a bogus run-time complaint about a lack of 64-bit integers when the
3732 int64 type is defined as an `off_t` and it actually has 64-bits.
3734 - Added a configure check for open64() without mkstemp64() so that we can
3735 avoid using mkstemp() when such a combination is encountered. This bypasses
3736 a problem writing out large temp files on OSes such as AIX and HP-UX.
3738 - Fixed an age-old crash problem with `--read-batch` on a local copy (rsync
3739 was improperly assuming `--whole-file` for the local copy).
3741 - When `--dry-run` (`-n`) is used and the destination directory does not
3742 exist, rsync now produces a correct report of files that would be sent
3743 instead of dying with a chdir() error.
3745 - Fixed a bug that could cause a slow-to-connect rsync daemon to die with an
3746 error instead of waiting for the connection to finish.
3748 - Fixed an ssh interaction that could cause output to be lost when the user
3749 chose to combine the output of rsync's stdout and stderr (e.g. using the
3752 - Fixed an option-parsing bug when `--files-from` got passed to a daemon.
3756 - Added the `--partial-dir=DIR` option that lets you specify where to
3757 (temporarily) put a partially transferred file (instead of overwriting the
3758 destination file). E.g. `--partial-dir=.rsync-partial` Also added support
3759 for the `RSYNC_PARTIAL_DIR` environment variable that, when found,
3760 transforms a regular `--partial` option (such as the convenient `-P` option)
3761 into one that also specifies a directory.
3763 - Added `--keep-dirlinks` (`-K`), which allows you to symlink a directory onto
3764 another partition on the receiving side and have rsync treat it as matching
3765 a normal directory from the sender.
3767 - Added the `--inplace` option that tells rsync to write each destination file
3768 without using a temporary file. The matching of existing data in the
3769 destination file can be severely limited by this, but there are also cases
3770 where this is more efficient (such as appending data). Use only when needed
3771 (see the manpage for more details).
3773 - Added the `write only` option for the daemon's config file.
3775 - Added long-option names for `-4` and `-6` (namely `--ipv4` and `--ipv6`) and
3776 documented all these options in the manpage.
3778 - Improved the handling of the `--bwlimit` option so that it's less bursty,
3779 more accurate, and works properly over a larger range of values.
3781 - The rsync daemon-over-ssh code now looks for `SSH_CONNECTION` and
3782 `SSH2_CLIENT` in addition to `SSH_CLIENT` to figure out the IP address.
3784 - Added the `--checksum-seed=N` option for advanced users.
3786 - Batch writing/reading has a brand-new implementation that is simpler, fixes
3787 a few weird problems with the old code (such as no longer sprinkling the
3788 batch files into different dirs or even onto different systems), and is much
3789 less intrusive into the code (making it easier to maintain for the future).
3790 The new code generates just one data file instead of three, which makes it
3791 possible to read the batch on stdin via a remote shell. Also, the old
3792 requirement of forcing the same fixed checksum-seed for all batch processing
3795 - If an rsync daemon has a module set with `list = no` (which hides its
3796 presence in the list of available modules), a user that fails to
3797 authenticate gets the same `unknown module` error that they would get if the
3798 module were actually unknown (while still logging the real error to the
3799 daemon's log file). This prevents fishing for module names.
3801 - The daemon's `refuse options` config item now allows you to match option
3802 names using wildcards and/or the single-letter option names.
3804 - Each transferred file now gets its permissions and modified-time updated
3805 before the temp-file gets moved into place. Previously, the finished file
3806 would have a very brief window where its permissions disallowed all group
3809 - Added the ability to parse a literal IPv6 address in an `rsync:` URL (e.g.
3810 rsync://[2001:638:500:101::21]:873/module/dir).
3812 - The daemon's wildcard expanding code can now handle more than 1000 filenames
3813 (it's now limited by memory instead of having a hard-wired limit).
3817 - Some cleanup in the exclude code has saved some per-exclude memory and made
3818 the code easier to maintain.
3820 - Improved the argv-overflow checking for a remote command that has a lot of
3823 - Use rsyserr() in the various places that were still calling rprintf() with
3824 strerror() as an arg.
3826 - If an rsync daemon is listening on multiple sockets (to handle both IPv4 and
3827 IPv6 to a single port), we now close all the unneeded file handles after we
3828 accept a connection (we used to close just one of them).
3830 - Optimized the handling of larger block sizes (rsync used to slow to a crawl
3831 if the block size got too large).
3833 - Optimized away a loop in `hash_search()`.
3835 - Some improvements to the `sanitize_path()` and `clean_fname()` functions
3836 makes them more efficient and produce better results (while still being
3837 compatible with the file-name cleaning that gets done on both sides when
3838 sending the file-list).
3840 - Got rid of `alloc_sanitize_path()` after adding a destination-buffer arg to
3841 `sanitize_path()` made it possible to put all the former's functionality
3844 - The file-list that is output when at least 4 verbose options are specified
3845 reports the uid value on the sender even when rsync is not running as root
3846 (since we might be sending to a root receiver).
3850 - Added a `gen` target to rebuild most of the generated files, including
3851 configure, config.h.in, the manpages, and proto.h.
3853 - If `make proto` doesn't find some changes in the prototypes, the proto.h
3854 file is left untouched (its time-stamp used to always be updated).
3856 - The variable `$STRIP` (that is optionally set by the install-strip target's
3857 rule) was changed to `$INSTALL_STRIP` because some systems have `$STRIP`
3858 already set in the environment.
3860 - Fixed a build problem when `SUPPORT_HARD_LINKS` isn't defined.
3862 - When cross-compiling, the gettimeofday() function is now assumed to be a
3863 modern version that takes two-args (since we can't test it).
3865 ### DEVELOPER RELATED:
3867 - The scripts in the testsuite dir were cleaned up a bit and a few new tests
3870 - Some new diffs were added to the patches dir, and some accepted ones were
3873 ------------------------------------------------------------------------------
3875 # NEWS for rsync 2.6.2 (30 Apr 2004)
3877 ## Changes in this version:
3881 - Fixed a major bug in the sorting of the filenames when `--relative` is used
3882 for some sources (just sources such as `/` and `/*` were affected). This fix
3883 ensures that we ask for the right file-list item when requesting changes
3886 - Rsync now checks the return value of the close() function to better report
3887 disk-full problems on an NFS file system.
3889 - Restored the old daemon-server behavior of logging error messages rather
3890 than returning them to the user. (A better long-term fix will be sought in
3893 - An obscure uninitialized-variable bug was fixed in the uid/gid code. (This
3894 bug probably had no ill effects.)
3898 - Got rid of the configure check for sys/sysctl.h (it wasn't used and was
3899 causing a problem on some systems). Also improved the
3900 broken-largefile-locking test to try to avoid failure due to an NFS
3903 - Fixed a compile problem on systems that don't define `AI_NUMERICHOST`.
3905 - Fixed a compile problem in the popt source for compilers that don't support
3908 ### DEVELOPER RELATED:
3910 - Improved the testsuite's `merge` test to work on OSF1.
3912 - Two new diffs were added to the patches dir.
3914 ------------------------------------------------------------------------------
3916 # NEWS for rsync 2.6.1 (26 Apr 2004)
3918 ## Changes in this version:
3920 ### PROTOCOL NUMBER:
3922 - The protocol number was changed to 28.
3926 - Paths sent to an rsync daemon are more thoroughly sanitized when chroot is
3927 not used. If you're running a non-read-only rsync daemon with chroot
3928 disabled, **please upgrade**, ESPECIALLY if the user privs you run rsync
3929 under is anything above `nobody`.
3933 - Lower memory use, more optimal transfer of data over the socket, and lower
3934 CPU usage (see the INTERNAL section for details).
3936 - The `RSYNC_PROXY` environment variable can now contain a `USER:PASS@` prefix
3937 before the `HOST:PORT` information. (Bardur Arantsson)
3939 - The `--progress` output now mentions how far along in the transfer we are,
3940 including both a count of files transferred and a percentage of the total
3941 file-count that we've processed. It also shows better
3942 current-rate-of-transfer and remaining-transfer-time values.
3944 - Documentation changes now attempt to describe some often misunderstood
3945 features more clearly.
3949 - When `-x` (`--one-file-system`) is combined with `-L` (`--copy-links`) or
3950 `--copy-unsafe-links,` no symlinked files are skipped, even if the referent
3951 file is on a different filesystem.
3953 - The `--link-dest` code now works properly for a non-root user when (1) the
3954 UIDs of the source and destination differ and `-o` was specified, or (2)
3955 when the group of the source can't be used on the destination and `-g` was
3958 - Fixed a bug in the handling of `-H` (hard-links) that might cause the
3959 expanded PATH/NAME value of the current item to get overwritten (due to an
3960 expanded-name caching bug).
3962 - We now reset the `new data has been sent` flag at the start of each file we
3963 send. This makes sure that an interrupted transfer with the `--partial`
3964 option set doesn't keep a shorter temp file than the current basis file when
3965 no new data has been transferred over the wire for that file.
3967 - Fixed a byte-order problem in `--batch-mode` on big-endian machines. (Jay
3970 - When using `--cvs-exclude`, the exclude items we get from a per-directory's
3971 .cvsignore file once again only affect that one directory (not all following
3972 directories too). The items are also now properly word-split and parsed
3973 without any +/- prefix parsing.
3975 - When specifying the USER@HOST: prefix for a file, the USER part can now
3976 contain an '@', if needed (i.e. the last '@' is used to find the HOST, not
3979 - Fixed some bugs in the handling of group IDs for non-root users: (1) It
3980 properly handles a group that the sender didn't have a name for (it would
3981 previously skip changing the group on any files in that group). (2) If
3982 `--numeric-ids` is used, rsync no longer attempts to set groups that the
3983 user doesn't have the permission to set.
3985 - Fixed the `refuse options` setting in the rsyncd.conf file.
3987 - Improved the `-x` (`--one-file-system`) flag's handling of any mount-point
3988 directories we encounter. It is both more optimal (in that it no longer does
3989 a useless scan of the contents of the mount-point dirs) and also fixes a
3990 bug where a remapped mount of the original filesystem could get discovered
3991 in a subdir we should be ignoring.
3993 - Rsync no longer discards a double-slash at the start of a filename when
3994 trying to open the file. It also no longer constructs names that start with
3995 a double slash (unless the user supplied them).
3997 - Path-specifying options to a daemon should now work the same with or without
3998 chroot turned on. Previously, such a option (such as `--link-dest`) would
3999 get its absolute path munged into a relative one if chroot was not on,
4000 making that setting fairly useless. Rsync now transforms the path into one
4001 that is based on the module's base dir when chroot is not enabled.
4003 - Fixed a compatibility problem interacting with older rsync versions that
4004 might send us an empty `--suffix` value without telling us that
4005 `--backup-dir` was specified.
4007 - The `hosts allow` option for a daemon-over-remote-shell process now has
4008 improved support for IPv6 addresses and a fix for systems that have a length
4009 field in their socket structs.
4011 - Fixed the ability to request an empty backup `--suffix` when sending files
4014 - Fixed an option-parsing bug when `--files-from` was sent to a server sender.
4018 - Most of the I/O is now buffered, which results in a pretty large speedup
4019 when running under MS Windows. (Craig Barratt)
4021 - Optimizations to the name-handling/comparing code have made some significant
4022 reductions in user-CPU time for large file sets.
4024 - Some cleanup of the variable types make the code more consistent.
4026 - Reduced memory requirements of hard link preservation. (J.W. Schultz)
4028 - Implemented a new algorithm for hard-link handling that speeds up the code
4029 significantly. (J.W. Schultz and Wayne Davison)
4031 - The `--hard-link` option now uses the first existing file in the group of
4032 linked files as the basis for the transfer. This prevents the sub-optimal
4033 transfer of a file's data when a new hardlink is added on the sending side
4034 and it sorts alphabetically earlier in the list than the files that are
4035 already present on the receiving side.
4037 - Dropped support for protocol versions less than 20 (2.3.0 released 15 Mar
4038 1999) and activated warnings for protocols less than 25 (2.5.0 released 23
4039 Aug 2001). (Wayne Davison and J.W. Schultz, severally)
4041 - More optimal data transmission for `--hard-links` (protocol 28).
4043 - More optimal data transmission for `--checksum` (protocol 28).
4045 - Less memory is used when `--checksum` is specified.
4047 - Less memory is used in the file list (a per-file savings).
4049 - The generator is now better about not modifying the file list during the
4050 transfer in order to avoid a copy-on-write memory bifurcation (on systems
4051 where fork() uses shared memory). Previously, rsync's shared memory would
4052 slowly become unshared, resulting in real memory usage nearly doubling on
4053 the receiving side by the end of the transfer. Now, as long as permissions
4054 are being preserved, the shared memory should remain that way for the entire
4057 - Changed hardlink info and `file_struct` + strings to use allocation pools.
4058 This reduces memory use for large file-sets and permits freeing memory to
4059 the OS. (J.W. Schultz)
4061 - The 2 pipes used between the receiver and generator processes (which are
4062 forked on the same machine) were reduced to 1 pipe and the protocol improved
4063 so that (1) it is now impossible to have the `redo` pipe fill up and hang
4064 rsync, and (2) trailing messages from the receiver don't get lost on their
4065 way through the generator over to the sender (which mainly affected
4066 hard-link messages and verbose `--stats` output).
4068 - Improved the internal uid/gid code to be more portable and a little more
4071 - The device numbers sent when using `--devices` are now sent as separate
4072 major/minor values with 32-bit accuracy (protocol 28). Previously, the
4073 copied devices were sent as a single 32-bit number. This will make
4074 inter-operation of 64-bit binaries more compatible with their 32-bit
4075 brethren (with both ends of the connection are using protocol 28). Note that
4076 optimizations in the binary protocol for sending the device numbers often
4077 results in fewer bytes being used than before, even though more precision is
4080 - Some cleanup of the exclude/include structures and its code made things
4081 clearer (internally), simpler, and more efficient.
4083 - The reading & writing of the file-list in batch-mode is now handled by the
4084 same code that sends & receives the list over the wire. This makes it much
4085 easier to maintain. (Note that the batch code is still considered to be
4090 - The configure script now accepts `--with-rsyncd-conf=PATH` to override the
4091 default value of the /etc/rsyncd.conf file.
4093 - Fixed configure bug when running `./configure --disable-ipv6`.
4095 - Fixed compilation problem on Tru64 Unix (having to do with `sockaddr.sa_len`
4096 and `sockaddr.sin_len`).
4098 ### DEVELOPER RELATED:
4100 - Fixed `make test` bug when build dir is not the source dir.
4102 - Added a couple extra diffs in the `patches` dir, removed the ones that got
4103 applied, and rebuilt the rest.
4105 ------------------------------------------------------------------------------
4107 # NEWS for rsync 2.6.0 (1 Jan 2004)
4109 ## Changes in this version:
4111 ### PROTOCOL NUMBER:
4113 - The protocol number was changed to 27. The maximum accepted protocol number
4114 was increased from 30 to 40.
4118 - `ssh` is now the default remote shell for rsync. If you want to change this,
4119 configure like this: `./configure --with-rsh=rsh`.
4121 - Added `--files-from`, `--no-relative`, `--no-implied-dirs`, and `--from0`.
4122 Note that `--from0` affects the line-ending character for all the files read
4123 by the `--*-from` options. (Wayne Davison)
4125 - Length of csum2 is now per-file starting with protocol version
4128 - Per-file dynamic block size is now sqrt(file length). The per-file checksum
4129 size is determined according to an algorithm provided by Donovan Baarda
4130 which reduces the probability of rsync algorithm corrupting data and falling
4131 back using the whole md4 checksums. (J.W. Schultz, Donovan Baarda)
4133 - The `--stats` option no longer includes the (debug) malloc summary unless
4134 the verbose option was specified at least twice.
4136 - Added a new error/warning code for when files vanish from the sending side.
4137 Made vanished source files not interfere with the file-deletion pass when
4138 `--delete-after` was specified.
4140 - Various trailing-info sections are now preceded by a newline.
4144 - Fixed several exclude/include matching bugs when using wild-cards. This has
4145 a several user-visible effects, all of which make the matching more
4146 consistent and intuitive. This should hopefully not cause anyone problems
4147 since it makes the matching work more like what people are expecting. (Wayne
4150 - A pattern with a `**` no longer causes a `*` to match slashes. For example,
4151 with `/*/foo/**`, `foo` must be 2 levels deep. [If your string has BOTH `*`
4152 and `**` wildcards, changing the `*` wildcards to `**` will provide the old
4153 behavior in all versions.]
4155 - `**/foo` now matches at the base of the transfer (like /foo does). [Use
4156 `/**/foo` to get the old behavior in all versions.]
4158 - A non-anchored wildcard term floats to match beyond the base of the
4159 transfer. E.g. `CVS/R*` matches at the end of the path, just like the
4160 non-wildcard term `CVS/Root` does. [Use `/CVS/R*` to get the old behavior in
4163 - Including a `**` in the match term causes it to be matched against the
4164 entire path, not just the name portion, even if there aren't any interior
4165 slashes in the term. E.g. `foo**bar` would exclude `/path/foo-bar` (just
4166 like before) as well as `/foo-path/baz-bar` (unlike before). [Use `foo*bar`
4167 to get the old behavior in all versions.]
4169 - The exclude list specified in the daemon's config file is now properly
4170 applied to the pulled items no matter how deep the user's file-args are in
4171 the source tree. (Wayne Davison)
4173 - For protocol version >= 27, `mdfour_tail()` is called when the block size
4174 (including `checksum_seed`) is a multiple of 64. Previously it was not
4175 called, giving the wrong MD4 checksum. (Craig Barratt)
4177 - For protocol version >= 27, a 64 bit bit counter is used in mdfour.c as
4178 required by the RFC. Previously only a 32 bit bit counter was used, causing
4179 incorrect MD4 file checksums for file sizes >= 512MB - 4. (Craig Barratt)
4181 - Fixed a crash bug when interacting with older rsync versions and multiple
4182 files of the same name are destined for the same dir. (Wayne Davison)
4184 - Keep tmp names from overflowing MAXPATHLEN.
4186 - Make `--link-dest` honor the absence of `-p`, `-o`, and `-g`.
4188 - Made rsync treat a trailing slash in the destination in a more consistent
4191 - Fixed file I/O error detection. (John Van Essen)
4193 - Fixed bogus `malformed address {hostname}` message in rsyncd log when
4194 checking IP address against hostnames from `hosts allow` and `hosts deny`
4195 parameters in config file.
4197 - Print heap statistics when verbose >= 2 instead of when >= 1.
4199 - Fixed a compression (`-z`) bug when syncing a mostly-matching file that
4200 contains already-compressed data. (Yasuoka Masahiko and Wayne Davison)
4202 - Fixed a bug in the `--backup` code that could cause deleted files to not get
4205 - When the backup code makes new directories, create them with mode 0700
4206 instead of 0755 (since the directory permissions in the backup tree are not
4207 yet copied from the main tree).
4209 - Call setgroups() in a more portable manner.
4211 - Improved file-related error messages to better indicate exactly what
4212 pathname failed. (Wayne Davison)
4214 - Fixed some bugs in the handling of `--delete` and `--exclude` when using the
4215 `--relative` (`-R`) option. (Wayne Davison)
4217 - Fixed bug that prevented regular files from replacing special files and
4218 caused a directory in `--link-dest` or `--compare-dest` to block the
4219 creation of a file with the same path. A directory still cannot be replaced
4220 by a regular file unless `--delete` specified. (J.W. Schultz)
4222 - Detect and report when open or opendir succeed but read and readdir fail
4223 caused by network filesystem issues and truncated files. (David Norwood,
4224 Michael Brown, J.W. Schultz)
4226 - Added a fix that should give ssh time to restore the tty settings if the
4227 user presses Ctrl-C at an ssh password prompt.
4231 - Eliminated vestigial support for old versions that we stopped supporting.
4234 - Simplified some of the option-parsing code. (Wayne Davison)
4236 - Some cleanup made to the exclude code, as well as some new defines added to
4237 enhance readability. (Wayne Davison)
4239 - Changed the protocol-version code so that it can interact at a lower
4240 protocol level than the maximum supported by both sides. Added an
4241 undocumented option, `--protocol=N`, to force the value we advertise to the
4242 other side (primarily for testing purposes). (Wayne Davison)
4244 ------------------------------------------------------------------------------
4246 # NEWS for rsync 2.5.7 (4 Dec 2003)
4248 ## Changes in this version:
4252 - Fix buffer handling bugs. (Andrew Tridgell, Martin Pool, Paul Russell,
4255 ------------------------------------------------------------------------------
4257 # NEWS for rsync 2.5.6, aka "the dwd-between-jobs release" (26 Jan 2003)
4259 ## Changes in this version:
4263 - The `--delete-after` option now implies `--delete`. (Wayne Davison)
4265 - The `--suffix` option can now be used with `--backup-dir`. (Michael
4268 - Combining `::` syntax with the `--rsh`/`-e` option now uses the specified
4269 remote-shell as a transport to talk to a (newly-spawned) server-daemon. This
4270 allows someone to use daemon features, such as modules, over a secure
4271 protocol, such as ssh. (JD Paul)
4273 - The rsync:// syntax for daemon connections is now accepted in the
4276 - If the file name given to `--include-from` or `--exclude-from` is `-`, rsync
4277 will read from standard input. (J.W. Schultz)
4279 - New option `--link-dest` which is like `--compare-dest` except that
4280 unchanged files are hard-linked in to the destination directory. (J.W.
4283 - Don't report an error if an excluded file disappears during an rsync run.
4284 (Eugene Chupriyanov and Bo Kersey)
4286 - Added .svn to `--cvs-exclude` list to support subversion. (Jon Middleton)
4288 - Properly support IPv6 addresses in the rsyncd.conf `hosts allow` and `hosts
4289 deny` fields. (Hideaki Yoshifuji)
4291 - Changed exclude file handling to permit DOS or MAC style line terminations.
4294 - Ignore errors from chmod when `-p`/`-a`/`--preserve-perms` is not set.
4299 - Fix `forward name lookup failed` errors on AIX 4.3.3. (John L. Allen, Martin
4302 - Generate each file's rolling-checksum data as we send it, not in a separate
4303 (memory-eating) pass before hand. This prevents timeout errors on really
4304 large files. (Stefan Nehlsen)
4306 - Fix compilation on Tru64. (Albert Chin, Zoong Pham)
4308 - Better handling of some client-server errors. (Martin Pool)
4310 - Fixed a crash that would occur when sending a list of files that contains a
4311 duplicate name (if it sorts to the end of the file list) and using
4312 `--delete`. (Wayne Davison)
4314 - Fixed the file-name duplicate-removal code when dealing with multiple dups
4315 in a row. (Wayne Davison)
4317 - Fixed a bug that caused rsync to lose the exit status of its child processes
4318 and sometimes return an exit code of 0 instead of showing an error. (David
4319 R. Staples, Dave Dykstra)
4321 - Fixed bug in `--copy-unsafe-links` that caused it to be completely broken.
4324 - Prevent infinite recursion in cleanup code under certain circumstances.
4325 (Sviatoslav Sviridov and Marc Espie)
4327 - Fixed a bug that prevented rsync from creating intervening directories when
4328 `--relative-paths`/`-R` is set. (Craig Barratt)
4330 - Prevent `Connection reset by peer` messages from Cygwin. (Randy O'Meara)
4334 - Many code cleanups and improved internal documentation. (Martin Pool, Nelson
4337 - Portability fixes. (Dave Dykstra and Wayne Davison)
4339 - More test cases. (Martin Pool)
4341 - Some test-case fixes. (Brian Poole, Wayne Davison)
4343 - Updated included popt to the latest vendor drop, version 1.6.4. (Jos
4346 - Updated config.guess and config.sub to latest versions; this means rsync
4347 should build on more platforms. (Paul Green)
4349 ------------------------------------------------------------------------------
4351 # NEWS for rsync 2.5.5, aka Snowy River (2 Apr 2002)
4353 ## Changes in this version:
4357 - With `--progress`, when a transfer is complete show the time taken;
4358 otherwise show expected time to complete. (Cameron Simpson)
4360 - Make `make install-strip` works properly, and `make install` accepts a
4361 DESTDIR variable for help in building binary packages. (Peter
4362 Breitenlohner, Greg Louis)
4364 - If configured with `--enable-maintainer-mode`, then on receipt of a fatal
4365 signal rsync will try to open an xterm running gdb, similarly to Samba's
4366 `panic action` or GNOME's bug-buddy. (Martin Pool)
4370 - Fix situation where failure to fork (e.g. because out of process slots)
4371 would cause rsync to kill all processes owned by the current user. Yes,
4372 really! (Paul Haas, Martin Pool)
4374 - Fix test suite on Solaris. (Jos Backus, Martin Pool)
4376 - Fix minor memory leak in socket code. (Dave Dykstra, Martin Pool.)
4378 - Fix `--whole-file` problem that caused it to be the default even for remote
4379 connections. (Martin Pool, Frank Schulz)
4381 - Work around bug in Mac OS X mkdir(2), which cannot handle trailing slashes.
4382 <http://www.opensource.apple.com/bugs/X/BSD%20Kernel/2734739.html> (Martin
4385 - Improved network error handling. (Greg A. Woods)
4387 ------------------------------------------------------------------------------
4389 # NEWS for rsync 2.5.4, aka "Imitation lizard skin" (13 Mar 2002)
4391 ## Changes in this version:
4395 - Additional fix for zlib double-free bug. (Martin Pool, Andrew Tridgell) (CVE
4400 - Merge in changes from zlib 1.1.3 to zlib 1.1.4. (Jos Backus) (Note that
4401 rsync still uses a custom version of zlib; you can not just link against a
4402 system library. See zlib/README.rsync)
4404 - Additional test cases for `--compress`. (Martin Pool)
4406 ------------------------------------------------------------------------------
4408 # NEWS for rsync 2.5.3, aka "Happy 26" (11 Mar 2002)
4410 ## Changes in this version:
4414 - Make sure that supplementary groups are removed from a server
4415 process after changing uid and gid. (Ethan Benson) (Debian bug
4416 #132272, CVE CAN-2002-0080)
4420 - Fix zlib double-free bug. (Owen Taylor, Mark J Cox) (CVE CAN-2002-0059)
4422 - Fixed problem that in many cases caused the error message unexpected read
4423 size of 0 in `map_ptr` and resulted in the wrong data being copied.
4425 - Fixed compilation errors on some systems caused by the use of `unsigned
4428 - Fixed problem on systems such as Sunos4 that do not support realloc on a
4429 NULL pointer; error was 'out of memory in "flist_expand"'.
4431 - Fix for rsync server processes hanging around after the client unexpectedly
4432 disconnects. (Colin Walters) (Debian bug #128632)
4434 - Cope with BSD systems on which mkdir() will not accept a trailing slash.
4438 - Merge in changes from zlib 1.1.2 to zlib 1.1.3. (Note that rsync still uses
4439 a custom version of zlib; you can not just link against a system library.
4440 See zlib/README.rsync)
4442 - Command to initiate connections is only shown with `-vv`, rather than `-v`
4443 as in 2.5.2. Output from plain `-v` is more similar to what was historically
4444 used so as not to break scripts that try to parse the output.
4446 - Added `--no-whole-file` and `--no-blocking-io` options (Dave Dykstra)
4448 - Made the `--write-batch` and `--read-batch` options actually work and added
4449 documentation in the manpage (Jos Backus)
4451 - If the daemon is unable to fork a child to accept a connection, print an
4452 error message. (Colin Walters)
4454 ------------------------------------------------------------------------------
4456 # NEWS for rsync 2.5.2 (26 Jan 2002)
4458 ## Changes in this version:
4462 - Signedness security patch from Sebastian Krahmer <krahmer@suse.de> -- in
4463 some cases we were not sufficiently careful about reading integers from the
4466 ### PROTOCOL NUMBER:
4468 - The protocol number was changed to 26.
4472 - Fix possible string mangling in log files.
4474 - Fix for setting local address of outgoing sockets.
4476 - Better handling of hardlinks and devices on platforms with 64-bit `dev_t` or
4479 - Name resolution on machines supporting IPv6 is improved.
4481 - Fix for device nodes. (dann frazier) (Debian #129135)
4485 - With `-v`, rsync now shows the command used to initiate an ssh/rsh
4488 - `--statistics` now shows memory heap usage on platforms that support
4491 - "The Ted T'so school of program optimization": make progress visible and
4492 people will think it's faster. (With `--progress`, rsync will show you how
4493 many files it has seen as it builds the `file_list`, giving some indication
4494 that it has not hung.)
4496 - Improvements to batch mode support. This is still experimental but testing
4497 would be welcome. (Jos Backus)
4499 - New `--ignore-existing` option, patch previously distributed with Vipul's
4500 Razor. (Debian #124286)
4502 ------------------------------------------------------------------------------
4504 # NEWS for rsync 2.5.1 (3 Jan 2002)
4506 ## Changes in this version:
4510 - Fix for segfault in `--daemon` mode configuration parser. (Paul Mackerras)
4512 - Correct `string<->address` parsing for both IPv4 and 6. (YOSHIFUJI Hideaki,
4513 SUMIKAWA Munechika and Jun-ichiro `itojun` Hagino)
4515 - Various fixes for IPv6 support. (Dave Dykstra)
4517 - rsync.1 typo fix. (Matt Kraai)
4519 - Test suite typo fixes. (Tom Schmidt)
4521 - rsync.1 grammar and clarity improvements. (Edward Welbourne)
4523 - Correction to ./configure tests for `inet_ntop`. (Jeff Garzik)
4527 - `--progress` and `-P` now show estimated data transfer rate (in a multiple
4528 of bytes/s) and estimated time to completion. (Rik Faith)
4530 - `--no-detach` option, required to run as a W32 service and also useful when
4531 running on Unix under daemontools, AIX's SRC, or a debugger. (Max Bowsher,
4534 - Clearer error messages for some conditions.
4536 ------------------------------------------------------------------------------
4538 # NEWS for rsync 2.5.0 (30 Nov 2001)
4540 ## Changes in this version:
4542 ### PROTOCOL NUMBER:
4544 - The protocol number was changed to 25.
4548 - Martin Pool <mbp@samba.org> is now a co-maintainer.
4552 - Support for LSB-compliant packaging <http://www.linuxbase.org/>
4554 - Shell wildcards are allowed in `auth users` lines.
4556 - Merged UNC rsync+ patch to support creation of standalone patch sets. By
4557 Bert J. Dempsey and Debra Weiss, updated by Jos Backus.
4558 <http://www.ils.unc.edu/i2dsi/unc_rsync+.html>
4560 - IPv6 support based on a patch from KAME.net, on systems including modern
4561 versions of Linux, Solaris, and HP-UX. Also includes IPv6 compatibility
4562 functions for old OSs by the Internet Software Consortium, Paul Vixie, the
4563 OpenSSH portability project, and OpenBSD.
4567 - Include/exclude cluestick: with `-vv`, print out whether files are included
4568 or excluded and why.
4570 - Many error messages have more friendly explanations and more details.
4572 - Manual page improvements plus scanty protocol documentation.
4574 - When running as `--daemon` in the background and using a `log file`
4575 rsyncd.conf directive, close the log file every time it is open when going
4576 to sleep on the socket. This allows the log file to get cleaned out by
4579 - Change to using libpopt rather than getopt for processing options. This
4580 makes the code cleaner and the behaviour more consistent across platforms.
4581 popt is included and built if not installed on the platform.
4583 - More details in `--version`, including note about whether 64-bit files,
4584 symlinks and hardlinks are supported.
4586 - MD4 code may use less CPU cycles.
4588 - Use mkstemp on systems where it is secure. If we use mktemp, explain that we
4589 do it in a secure way.
4591 - `--whole-file` is the default when source and target are on the local
4596 - Fix for various bugs causing rsync to hang.
4598 - Attempt to fix Large File Summit support on AIX.
4600 - Attempt to fix error handling lockup bug.
4602 - Give a non-0 exit code if **any** of the files we have been asked to
4603 transfer fail to transfer.
4605 - For log messages containing ridiculously long strings that might overflow a
4606 buffer rsync no longer aborts, but rather prints an ellipsis at the end of
4607 the string. (Patch from Ed Santiago.)
4611 - Improved support for UNICOS (tested on Cray T3E and Cray SV1)
4613 - autoconf2.52 (or later) is now required to rebuild the autoconf scripts. It
4614 is not required to simply build rsync.
4616 - Platforms thought to work in this release:
4618 - Cray SV1 UNICOS 10.0.0.8 cc
4619 - Debian Linux 2.2 UltraSparc gcc
4620 - Debian Linux testing/unstable ARM gcc
4621 - FreeBSD 3.3-RELEASE i386 cc
4622 - FreeBSD 4.1.1-RELEASE i386 cc
4623 - FreeBSD 4.3-STABLE i386 cc
4624 - HP PA-RISC HP-UX 10.20 gcc
4625 - HP PA-RISC HP-UX 11.11 cc
4628 - Mac OS X PPC (`--disable-ipv6`) cc
4629 - NetBSD 1.5 i386 gcc
4630 - NetBSD Current i386 cc
4631 - OpenBSD 2.5 Sparc gcc
4632 - OpenBSD 2.9 i386 cc
4633 - OpenBSD Current i386 cc
4634 - RedHat 6.2 i386 gcc
4635 - RedHat 6.2 i386 insure++
4636 - RedHat 7.0 i386 gcc
4637 - RedHat 7.1 i386 (Kernel 2.4.10) gcc
4638 - Slackware 8.0 i686 (Kernel 2.4.10)
4639 - Solaris 8 UltraSparc cc
4640 - Solaris 8 UltraSparc gcc
4641 - Solaris 8 i386 gcc
4642 - SuSE 7.1 i386 gcc2.95.2
4643 - SuSE 7.1 ppc gcc2.95.2
4644 - i386-pc-sco3.2v5.0.5 cc
4645 - i386-pc-sco3.2v5.0.5 gcc
4646 - powerpc-ibm-aix4.3.3.0 cc
4647 - i686-unknown-sysv5UnixWare7.1.0 gcc
4648 - i686-unknown-sysv5UnixWare7.1.0 cc
4652 - The existing test.sh script by Phil Hands has been merged into a
4653 test framework that works from both `make check` and the Samba
4656 ------------------------------------------------------------------------------
4658 ## Partial Protocol History
4660 | RELEASE DATE | VER. | DATE OF COMMIT\* | PROTOCOL |
4661 |--------------|--------|------------------|-------------|
4662 | ?? Dec 2022 | 3.2.7 | | 31 |
4663 | 09 Sep 2022 | 3.2.6 | | 31 |
4664 | 14 Aug 2022 | 3.2.5 | | 31 |
4665 | 15 Apr 2022 | 3.2.4 | | 31 |
4666 | 06 Aug 2020 | 3.2.3 | | 31 |
4667 | 04 Jul 2020 | 3.2.2 | | 31 |
4668 | 22 Jun 2020 | 3.2.1 | | 31 |
4669 | 19 Jun 2020 | 3.2.0 | | 31 |
4670 | 28 Jan 2018 | 3.1.3 | | 31 |
4671 | 21 Dec 2015 | 3.1.2 | | 31 |
4672 | 22 Jun 2014 | 3.1.1 | | 31 |
4673 | 28 Sep 2013 | 3.1.0 | 31 Aug 2008 | 31 |
4674 | 23 Sep 2011 | 3.0.9 | | 30 |
4675 | 26 Mar 2011 | 3.0.8 | | 30 |
4676 | 31 Dec 2009 | 3.0.7 | | 30 |
4677 | 08 May 2009 | 3.0.6 | | 30 |
4678 | 28 Dec 2008 | 3.0.5 | | 30 |
4679 | 06 Sep 2008 | 3.0.4 | | 30 |
4680 | 29 Jun 2008 | 3.0.3 | | 30 |
4681 | 08 Apr 2008 | 3.0.2 | | 30 |
4682 | 03 Apr 2008 | 3.0.1 | | 30 |
4683 | 01 Mar 2008 | 3.0.0 | 11 Nov 2006 | 30 |
4684 | 06 Nov 2006 | 2.6.9 | | 29 |
4685 | 22 Apr 2006 | 2.6.8 | | 29 |
4686 | 11 Mar 2006 | 2.6.7 | | 29 |
4687 | 28 Jul 2005 | 2.6.6 | | 29 |
4688 | 01 Jun 2005 | 2.6.5 | | 29 |
4689 | 30 Mar 2005 | 2.6.4 | 17 Jan 2005 | 29 |
4690 | 30 Sep 2004 | 2.6.3 | | 28 |
4691 | 30 Apr 2004 | 2.6.2 | | 28 |
4692 | 26 Apr 2004 | 2.6.1 | 08 Jan 2004 | 28 |
4693 | 01 Jan 2004 | 2.6.0 | 10 Apr 2003 | 27 (MAX=40) |
4694 | 04 Dec 2003 | 2.5.7 | | 26 |
4695 | 26 Jan 2003 | 2.5.6 | | 26 |
4696 | 02 Apr 2002 | 2.5.5 | | 26 |
4697 | 13 Mar 2002 | 2.5.4 | | 26 |
4698 | 11 Mar 2002 | 2.5.3 | | 26 |
4699 | 26 Jan 2002 | 2.5.2 | 11 Jan 2002 | 26 |
4700 | 03 Jan 2002 | 2.5.1 | | 25 |
4701 | 30 Nov 2001 | 2.5.0 | 23 Aug 2001 | 25 |
4702 | 06 Sep 2000 | 2.4.6 | | 24 |
4703 | 19 Aug 2000 | 2.4.5 | | 24 |
4704 | 29 Jul 2000 | 2.4.4 | | 24 |
4705 | 09 Apr 2000 | 2.4.3 | | 24 |
4706 | 30 Mar 2000 | 2.4.2 | | 24 |
4707 | 30 Jan 2000 | 2.4.1 | 29 Jan 2000 | 24 |
4708 | 29 Jan 2000 | 2.4.0 | 28 Jan 2000 | 23 |
4709 | 25 Jan 2000 | 2.3.3 | 23 Jan 2000 | 22 |
4710 | 08 Nov 1999 | 2.3.2 | 26 Jun 1999 | 21 |
4711 | 06 Apr 1999 | 2.3.1 | | 20 |
4712 | 15 Mar 1999 | 2.3.0 | 15 Mar 1999 | 20 |
4713 | 25 Nov 1998 | 2.2.1 | | 19 |
4714 | 03 Nov 1998 | 2.2.0 | | 19 |
4715 | 09 Sep 1998 | 2.1.1 | | 19 |
4716 | 20 Jul 1998 | 2.1.0 | | 19 |
4717 | 17 Jul 1998 | 2.0.19 | | 19 |
4718 | 18 Jun 1998 | 2.0.17 | | 19 |
4719 | 01 Jun 1998 | 2.0.16 | | 19 |
4720 | 27 May 1998 | 2.0.13 | 27 May 1998 | 19 |
4721 | 26 May 1998 | 2.0.12 | | 18 |
4722 | 22 May 1998 | 2.0.11 | | 18 |
4723 | 18 May 1998 | 2.0.9 | 18 May 1998 | 18 |
4724 | 17 May 1998 | 2.0.8 | | 17 |
4725 | 15 May 1998 | 2.0.1 | | 17 |
4726 | 14 May 1998 | 2.0.0 | | 17 |
4727 | 17 Apr 1998 | 1.7.4 | | 17 |
4728 | 13 Apr 1998 | 1.7.3 | | 17 |
4729 | 05 Apr 1998 | 1.7.2 | | 17 |
4730 | 26 Mar 1998 | 1.7.1 | | 17 |
4731 | 26 Mar 1998 | 1.7.0 | 26 Mar 1998 | 17 (MAX=30) |
4732 | 13 Jan 1998 | 1.6.9 | 13 Jan 1998 | 15 (MAX=20) |
4734 \* DATE OF COMMIT is the date the protocol change was committed to version