arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi

   1 /*
   2  * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of the
  12  *     License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  * Or, alternatively,
  20  *
  21  *  b) Permission is hereby granted, free of charge, to any person
  22  *     obtaining a copy of this software and associated documentation
  23  *     files (the "Software"), to deal in the Software without
  24  *     restriction, including without limitation the rights to use,
  25  *     copy, modify, merge, publish, distribute, sublicense, and/or
  26  *     sell copies of the Software, and to permit persons to whom the
  27  *     Software is furnished to do so, subject to the following
  28  *     conditions:
  29  *
  30  *     The above copyright notice and this permission notice shall be
  31  *     included in all copies or substantial portions of the Software.
  32  *
  33  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  34  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  35  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  36  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  37  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  38  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  39  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  40  *     OTHER DEALINGS IN THE SOFTWARE.
  41  */
  42
  43 #include <dt-bindings/clock/sun6i-rtc.h>
  44 #include <dt-bindings/clock/sun8i-de2.h>
  45 #include <dt-bindings/clock/sun8i-h3-ccu.h>
  46 #include <dt-bindings/clock/sun8i-r-ccu.h>
  47 #include <dt-bindings/interrupt-controller/arm-gic.h>
  48 #include <dt-bindings/reset/sun8i-de2.h>
  49 #include <dt-bindings/reset/sun8i-h3-ccu.h>
  50 #include <dt-bindings/reset/sun8i-r-ccu.h>
  51
  52 / {
  53         interrupt-parent = <&gic>;
  54         #address-cells = <1>;
  55         #size-cells = <1>;
  56
  57         chosen {
  58                 #address-cells = <1>;
  59                 #size-cells = <1>;
  60                 ranges;
  61
  62                 framebuffer-hdmi {
  63                         compatible = "allwinner,simple-framebuffer",
  64                                      "simple-framebuffer";
  65                         allwinner,pipeline = "mixer0-lcd0-hdmi";
  66                         clocks = <&display_clocks CLK_MIXER0>,
  67                                  <&ccu CLK_TCON0>, <&ccu CLK_HDMI>;
  68                         status = "disabled";
  69                 };
  70
  71                 framebuffer-tve {
  72                         compatible = "allwinner,simple-framebuffer",
  73                                      "simple-framebuffer";
  74                         allwinner,pipeline = "mixer1-lcd1-tve";
  75                         clocks = <&display_clocks CLK_MIXER1>,
  76                                  <&ccu CLK_TVE>;
  77                         status = "disabled";
  78                 };
  79         };
  80
  81         clocks {
  82                 #address-cells = <1>;
  83                 #size-cells = <1>;
  84                 ranges;
  85
  86                 osc24M: osc24M_clk {
  87                         #clock-cells = <0>;
  88                         compatible = "fixed-clock";
  89                         clock-frequency = <24000000>;
  90                         clock-accuracy = <50000>;
  91                         clock-output-names = "osc24M";
  92                 };
  93
  94                 osc32k: osc32k_clk {
  95                         #clock-cells = <0>;
  96                         compatible = "fixed-clock";
  97                         clock-frequency = <32768>;
  98                         clock-accuracy = <50000>;
  99                         clock-output-names = "ext_osc32k";
 100                 };
 101         };
 102
 103         de: display-engine {
 104                 compatible = "allwinner,sun8i-h3-display-engine";
 105                 allwinner,pipelines = <&mixer0>;
 106                 status = "disabled";
 107         };
 108
 109         soc {
 110                 compatible = "simple-bus";
 111                 #address-cells = <1>;
 112                 #size-cells = <1>;
 113                 dma-ranges;
 114                 ranges;
 115
 116                 display_clocks: clock@1000000 {
 117                         /* compatible is in per SoC .dtsi file */
 118                         reg = <0x01000000 0x10000>;
 119                         clocks = <&ccu CLK_BUS_DE>,
 120                                  <&ccu CLK_DE>;
 121                         clock-names = "bus",
 122                                       "mod";
 123                         resets = <&ccu RST_BUS_DE>;
 124                         #clock-cells = <1>;
 125                         #reset-cells = <1>;
 126                 };
 127
 128                 mixer0: mixer@1100000 {
 129                         compatible = "allwinner,sun8i-h3-de2-mixer-0";
 130                         reg = <0x01100000 0x100000>;
 131                         clocks = <&display_clocks CLK_BUS_MIXER0>,
 132                                  <&display_clocks CLK_MIXER0>;
 133                         clock-names = "bus",
 134                                       "mod";
 135                         resets = <&display_clocks RST_MIXER0>;
 136
 137                         ports {
 138                                 #address-cells = <1>;
 139                                 #size-cells = <0>;
 140
 141                                 mixer0_out: port@1 {
 142                                         reg = <1>;
 143
 144                                         mixer0_out_tcon0: endpoint {
 145                                                 remote-endpoint = <&tcon0_in_mixer0>;
 146                                         };
 147                                 };
 148                         };
 149                 };
 150
 151                 dma: dma-controller@1c02000 {
 152                         compatible = "allwinner,sun8i-h3-dma";
 153                         reg = <0x01c02000 0x1000>;
 154                         interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 155                         clocks = <&ccu CLK_BUS_DMA>;
 156                         resets = <&ccu RST_BUS_DMA>;
 157                         #dma-cells = <1>;
 158                 };
 159
 160                 tcon0: lcd-controller@1c0c000 {
 161                         compatible = "allwinner,sun8i-h3-tcon-tv",
 162                                      "allwinner,sun8i-a83t-tcon-tv";
 163                         reg = <0x01c0c000 0x1000>;
 164                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 165                         clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
 166                         clock-names = "ahb", "tcon-ch1";
 167                         resets = <&ccu RST_BUS_TCON0>;
 168                         reset-names = "lcd";
 169
 170                         ports {
 171                                 #address-cells = <1>;
 172                                 #size-cells = <0>;
 173
 174                                 tcon0_in: port@0 {
 175                                         reg = <0>;
 176
 177                                         tcon0_in_mixer0: endpoint {
 178                                                 remote-endpoint = <&mixer0_out_tcon0>;
 179                                         };
 180                                 };
 181
 182                                 tcon0_out: port@1 {
 183                                         #address-cells = <1>;
 184                                         #size-cells = <0>;
 185                                         reg = <1>;
 186
 187                                         tcon0_out_hdmi: endpoint@1 {
 188                                                 reg = <1>;
 189                                                 remote-endpoint = <&hdmi_in_tcon0>;
 190                                         };
 191                                 };
 192                         };
 193                 };
 194
 195                 mmc0: mmc@1c0f000 {
 196                         /* compatible and clocks are in per SoC .dtsi file */
 197                         reg = <0x01c0f000 0x1000>;
 198                         pinctrl-names = "default";
 199                         pinctrl-0 = <&mmc0_pins>;
 200                         resets = <&ccu RST_BUS_MMC0>;
 201                         reset-names = "ahb";
 202                         interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 203                         status = "disabled";
 204                         #address-cells = <1>;
 205                         #size-cells = <0>;
 206                 };
 207
 208                 mmc1: mmc@1c10000 {
 209                         /* compatible and clocks are in per SoC .dtsi file */
 210                         reg = <0x01c10000 0x1000>;
 211                         pinctrl-names = "default";
 212                         pinctrl-0 = <&mmc1_pins>;
 213                         resets = <&ccu RST_BUS_MMC1>;
 214                         reset-names = "ahb";
 215                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 216                         status = "disabled";
 217                         #address-cells = <1>;
 218                         #size-cells = <0>;
 219                 };
 220
 221                 mmc2: mmc@1c11000 {
 222                         /* compatible and clocks are in per SoC .dtsi file */
 223                         reg = <0x01c11000 0x1000>;
 224                         resets = <&ccu RST_BUS_MMC2>;
 225                         reset-names = "ahb";
 226                         interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 227                         status = "disabled";
 228                         #address-cells = <1>;
 229                         #size-cells = <0>;
 230                 };
 231
 232                 sid: eeprom@1c14000 {
 233                         /* compatible is in per SoC .dtsi file */
 234                         reg = <0x1c14000 0x400>;
 235                         #address-cells = <1>;
 236                         #size-cells = <1>;
 237
 238                         ths_calibration: thermal-sensor-calibration@34 {
 239                                 reg = <0x34 4>;
 240                         };
 241                 };
 242
 243                 msgbox: mailbox@1c17000 {
 244                         compatible = "allwinner,sun8i-h3-msgbox",
 245                                      "allwinner,sun6i-a31-msgbox";
 246                         reg = <0x01c17000 0x1000>;
 247                         clocks = <&ccu CLK_BUS_MSGBOX>;
 248                         resets = <&ccu RST_BUS_MSGBOX>;
 249                         interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 250                         #mbox-cells = <1>;
 251                 };
 252
 253                 usb_otg: usb@1c19000 {
 254                         compatible = "allwinner,sun8i-h3-musb";
 255                         reg = <0x01c19000 0x400>;
 256                         clocks = <&ccu CLK_BUS_OTG>;
 257                         resets = <&ccu RST_BUS_OTG>;
 258                         interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 259                         interrupt-names = "mc";
 260                         phys = <&usbphy 0>;
 261                         phy-names = "usb";
 262                         extcon = <&usbphy 0>;
 263                         dr_mode = "otg";
 264                         status = "disabled";
 265                 };
 266
 267                 usbphy: phy@1c19400 {
 268                         compatible = "allwinner,sun8i-h3-usb-phy";
 269                         reg = <0x01c19400 0x2c>,
 270                               <0x01c1a800 0x4>,
 271                               <0x01c1b800 0x4>,
 272                               <0x01c1c800 0x4>,
 273                               <0x01c1d800 0x4>;
 274                         reg-names = "phy_ctrl",
 275                                     "pmu0",
 276                                     "pmu1",
 277                                     "pmu2",
 278                                     "pmu3";
 279                         clocks = <&ccu CLK_USB_PHY0>,
 280                                  <&ccu CLK_USB_PHY1>,
 281                                  <&ccu CLK_USB_PHY2>,
 282                                  <&ccu CLK_USB_PHY3>;
 283                         clock-names = "usb0_phy",
 284                                       "usb1_phy",
 285                                       "usb2_phy",
 286                                       "usb3_phy";
 287                         resets = <&ccu RST_USB_PHY0>,
 288                                  <&ccu RST_USB_PHY1>,
 289                                  <&ccu RST_USB_PHY2>,
 290                                  <&ccu RST_USB_PHY3>;
 291                         reset-names = "usb0_reset",
 292                                       "usb1_reset",
 293                                       "usb2_reset",
 294                                       "usb3_reset";
 295                         status = "disabled";
 296                         #phy-cells = <1>;
 297                 };
 298
 299                 ehci0: usb@1c1a000 {
 300                         compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 301                         reg = <0x01c1a000 0x100>;
 302                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 303                         clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
 304                         resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
 305                         phys = <&usbphy 0>;
 306                         phy-names = "usb";
 307                         status = "disabled";
 308                 };
 309
 310                 ohci0: usb@1c1a400 {
 311                         compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 312                         reg = <0x01c1a400 0x100>;
 313                         interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 314                         clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
 315                                  <&ccu CLK_USB_OHCI0>;
 316                         resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
 317                         phys = <&usbphy 0>;
 318                         phy-names = "usb";
 319                         status = "disabled";
 320                 };
 321
 322                 ehci1: usb@1c1b000 {
 323                         compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 324                         reg = <0x01c1b000 0x100>;
 325                         interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 326                         clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
 327                         resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
 328                         phys = <&usbphy 1>;
 329                         phy-names = "usb";
 330                         status = "disabled";
 331                 };
 332
 333                 ohci1: usb@1c1b400 {
 334                         compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 335                         reg = <0x01c1b400 0x100>;
 336                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 337                         clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
 338                                  <&ccu CLK_USB_OHCI1>;
 339                         resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
 340                         phys = <&usbphy 1>;
 341                         phy-names = "usb";
 342                         status = "disabled";
 343                 };
 344
 345                 ehci2: usb@1c1c000 {
 346                         compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 347                         reg = <0x01c1c000 0x100>;
 348                         interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 349                         clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
 350                         resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
 351                         phys = <&usbphy 2>;
 352                         phy-names = "usb";
 353                         status = "disabled";
 354                 };
 355
 356                 ohci2: usb@1c1c400 {
 357                         compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 358                         reg = <0x01c1c400 0x100>;
 359                         interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 360                         clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
 361                                  <&ccu CLK_USB_OHCI2>;
 362                         resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
 363                         phys = <&usbphy 2>;
 364                         phy-names = "usb";
 365                         status = "disabled";
 366                 };
 367
 368                 ehci3: usb@1c1d000 {
 369                         compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 370                         reg = <0x01c1d000 0x100>;
 371                         interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 372                         clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
 373                         resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
 374                         phys = <&usbphy 3>;
 375                         phy-names = "usb";
 376                         status = "disabled";
 377                 };
 378
 379                 ohci3: usb@1c1d400 {
 380                         compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 381                         reg = <0x01c1d400 0x100>;
 382                         interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 383                         clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
 384                                  <&ccu CLK_USB_OHCI3>;
 385                         resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
 386                         phys = <&usbphy 3>;
 387                         phy-names = "usb";
 388                         status = "disabled";
 389                 };
 390
 391                 ccu: clock@1c20000 {
 392                         /* compatible is in per SoC .dtsi file */
 393                         reg = <0x01c20000 0x400>;
 394                         clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 395                         clock-names = "hosc", "losc";
 396                         #clock-cells = <1>;
 397                         #reset-cells = <1>;
 398                 };
 399
 400                 pio: pinctrl@1c20800 {
 401                         /* compatible is in per SoC .dtsi file */
 402                         reg = <0x01c20800 0x400>;
 403                         interrupt-parent = <&r_intc>;
 404                         interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 405                                      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 406                         clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
 407                                  <&rtc CLK_OSC32K>;
 408                         clock-names = "apb", "hosc", "losc";
 409                         gpio-controller;
 410                         #gpio-cells = <3>;
 411                         interrupt-controller;
 412                         #interrupt-cells = <3>;
 413
 414                         csi_pins: csi-pins {
 415                                 pins = "PE0", "PE2", "PE3", "PE4", "PE5",
 416                                        "PE6", "PE7", "PE8", "PE9", "PE10",
 417                                        "PE11";
 418                                 function = "csi";
 419                         };
 420
 421                         emac_rgmii_pins: emac-rgmii-pins {
 422                                 pins = "PD0", "PD1", "PD2", "PD3", "PD4",
 423                                        "PD5", "PD7", "PD8", "PD9", "PD10",
 424                                        "PD12", "PD13", "PD15", "PD16", "PD17";
 425                                 function = "emac";
 426                                 drive-strength = <40>;
 427                         };
 428
 429                         i2c0_pins: i2c0-pins {
 430                                 pins = "PA11", "PA12";
 431                                 function = "i2c0";
 432                         };
 433
 434                         i2c1_pins: i2c1-pins {
 435                                 pins = "PA18", "PA19";
 436                                 function = "i2c1";
 437                         };
 438
 439                         i2c2_pins: i2c2-pins {
 440                                 pins = "PE12", "PE13";
 441                                 function = "i2c2";
 442                         };
 443
 444                         mmc0_pins: mmc0-pins {
 445                                 pins = "PF0", "PF1", "PF2", "PF3",
 446                                        "PF4", "PF5";
 447                                 function = "mmc0";
 448                                 drive-strength = <30>;
 449                                 bias-pull-up;
 450                         };
 451
 452                         mmc1_pins: mmc1-pins {
 453                                 pins = "PG0", "PG1", "PG2", "PG3",
 454                                        "PG4", "PG5";
 455                                 function = "mmc1";
 456                                 drive-strength = <30>;
 457                                 bias-pull-up;
 458                         };
 459
 460                         mmc2_8bit_pins: mmc2-8bit-pins {
 461                                 pins = "PC5", "PC6", "PC8",
 462                                        "PC9", "PC10", "PC11",
 463                                        "PC12", "PC13", "PC14",
 464                                        "PC15", "PC16";
 465                                 function = "mmc2";
 466                                 drive-strength = <30>;
 467                                 bias-pull-up;
 468                         };
 469
 470                         spdif_tx_pin: spdif-tx-pin {
 471                                 pins = "PA17";
 472                                 function = "spdif";
 473                         };
 474
 475                         spi0_pins: spi0-pins {
 476                                 pins = "PC0", "PC1", "PC2", "PC3";
 477                                 function = "spi0";
 478                         };
 479
 480                         spi1_pins: spi1-pins {
 481                                 pins = "PA15", "PA16", "PA14", "PA13";
 482                                 function = "spi1";
 483                         };
 484
 485                         uart0_pa_pins: uart0-pa-pins {
 486                                 pins = "PA4", "PA5";
 487                                 function = "uart0";
 488                         };
 489
 490                         uart1_pins: uart1-pins {
 491                                 pins = "PG6", "PG7";
 492                                 function = "uart1";
 493                         };
 494
 495                         uart1_rts_cts_pins: uart1-rts-cts-pins {
 496                                 pins = "PG8", "PG9";
 497                                 function = "uart1";
 498                         };
 499
 500                         uart2_pins: uart2-pins {
 501                                 pins = "PA0", "PA1";
 502                                 function = "uart2";
 503                         };
 504
 505                         uart2_rts_cts_pins: uart2-rts-cts-pins {
 506                                 pins = "PA2", "PA3";
 507                                 function = "uart2";
 508                         };
 509
 510                         uart3_pins: uart3-pins {
 511                                 pins = "PA13", "PA14";
 512                                 function = "uart3";
 513                         };
 514
 515                         uart3_rts_cts_pins: uart3-rts-cts-pins {
 516                                 pins = "PA15", "PA16";
 517                                 function = "uart3";
 518                         };
 519                 };
 520
 521                 timer@1c20c00 {
 522                         compatible = "allwinner,sun8i-a23-timer";
 523                         reg = <0x01c20c00 0xa0>;
 524                         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
 525                                      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 526                         clocks = <&osc24M>;
 527                 };
 528
 529                 emac: ethernet@1c30000 {
 530                         compatible = "allwinner,sun8i-h3-emac";
 531                         syscon = <&syscon>;
 532                         reg = <0x01c30000 0x10000>;
 533                         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 534                         interrupt-names = "macirq";
 535                         resets = <&ccu RST_BUS_EMAC>;
 536                         reset-names = "stmmaceth";
 537                         clocks = <&ccu CLK_BUS_EMAC>;
 538                         clock-names = "stmmaceth";
 539                         status = "disabled";
 540
 541                         mdio: mdio {
 542                                 #address-cells = <1>;
 543                                 #size-cells = <0>;
 544                                 compatible = "snps,dwmac-mdio";
 545                         };
 546
 547                         mdio-mux {
 548                                 compatible = "allwinner,sun8i-h3-mdio-mux";
 549                                 #address-cells = <1>;
 550                                 #size-cells = <0>;
 551
 552                                 mdio-parent-bus = <&mdio>;
 553                                 /* Only one MDIO is usable at the time */
 554                                 internal_mdio: mdio@1 {
 555                                         compatible = "allwinner,sun8i-h3-mdio-internal";
 556                                         reg = <1>;
 557                                         #address-cells = <1>;
 558                                         #size-cells = <0>;
 559
 560                                         int_mii_phy: ethernet-phy@1 {
 561                                                 compatible = "ethernet-phy-ieee802.3-c22";
 562                                                 reg = <1>;
 563                                                 clocks = <&ccu CLK_BUS_EPHY>;
 564                                                 resets = <&ccu RST_BUS_EPHY>;
 565                                         };
 566                                 };
 567
 568                                 external_mdio: mdio@2 {
 569                                         reg = <2>;
 570                                         #address-cells = <1>;
 571                                         #size-cells = <0>;
 572                                 };
 573                         };
 574                 };
 575
 576                 mbus: dram-controller@1c62000 {
 577                         /* compatible is in per SoC .dtsi file */
 578                         reg = <0x01c62000 0x1000>,
 579                               <0x01c63000 0x1000>;
 580                         reg-names = "mbus", "dram";
 581                         clocks = <&ccu CLK_MBUS>,
 582                                  <&ccu CLK_DRAM>,
 583                                  <&ccu CLK_BUS_DRAM>;
 584                         clock-names = "mbus", "dram", "bus";
 585                         #address-cells = <1>;
 586                         #size-cells = <1>;
 587                         dma-ranges = <0x00000000 0x40000000 0xc0000000>;
 588                         #interconnect-cells = <1>;
 589                 };
 590
 591                 spi0: spi@1c68000 {
 592                         compatible = "allwinner,sun8i-h3-spi";
 593                         reg = <0x01c68000 0x1000>;
 594                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 595                         clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
 596                         clock-names = "ahb", "mod";
 597                         dmas = <&dma 23>, <&dma 23>;
 598                         dma-names = "rx", "tx";
 599                         pinctrl-names = "default";
 600                         pinctrl-0 = <&spi0_pins>;
 601                         resets = <&ccu RST_BUS_SPI0>;
 602                         status = "disabled";
 603                         #address-cells = <1>;
 604                         #size-cells = <0>;
 605                 };
 606
 607                 spi1: spi@1c69000 {
 608                         compatible = "allwinner,sun8i-h3-spi";
 609                         reg = <0x01c69000 0x1000>;
 610                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 611                         clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
 612                         clock-names = "ahb", "mod";
 613                         dmas = <&dma 24>, <&dma 24>;
 614                         dma-names = "rx", "tx";
 615                         pinctrl-names = "default";
 616                         pinctrl-0 = <&spi1_pins>;
 617                         resets = <&ccu RST_BUS_SPI1>;
 618                         status = "disabled";
 619                         #address-cells = <1>;
 620                         #size-cells = <0>;
 621                 };
 622
 623                 wdt0: watchdog@1c20ca0 {
 624                         compatible = "allwinner,sun6i-a31-wdt";
 625                         reg = <0x01c20ca0 0x20>;
 626                         interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 627                         clocks = <&osc24M>;
 628                 };
 629
 630                 spdif: spdif@1c21000 {
 631                         #sound-dai-cells = <0>;
 632                         compatible = "allwinner,sun8i-h3-spdif";
 633                         reg = <0x01c21000 0x400>;
 634                         interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 635                         clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
 636                         resets = <&ccu RST_BUS_SPDIF>;
 637                         clock-names = "apb", "spdif";
 638                         dmas = <&dma 2>;
 639                         dma-names = "tx";
 640                         status = "disabled";
 641                 };
 642
 643                 pwm: pwm@1c21400 {
 644                         compatible = "allwinner,sun8i-h3-pwm";
 645                         reg = <0x01c21400 0x8>;
 646                         clocks = <&osc24M>;
 647                         #pwm-cells = <3>;
 648                         status = "disabled";
 649                 };
 650
 651                 i2s0: i2s@1c22000 {
 652                         #sound-dai-cells = <0>;
 653                         compatible = "allwinner,sun8i-h3-i2s";
 654                         reg = <0x01c22000 0x400>;
 655                         interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 656                         clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
 657                         clock-names = "apb", "mod";
 658                         dmas = <&dma 3>, <&dma 3>;
 659                         resets = <&ccu RST_BUS_I2S0>;
 660                         dma-names = "rx", "tx";
 661                         status = "disabled";
 662                 };
 663
 664                 i2s1: i2s@1c22400 {
 665                         #sound-dai-cells = <0>;
 666                         compatible = "allwinner,sun8i-h3-i2s";
 667                         reg = <0x01c22400 0x400>;
 668                         interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 669                         clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
 670                         clock-names = "apb", "mod";
 671                         dmas = <&dma 4>, <&dma 4>;
 672                         resets = <&ccu RST_BUS_I2S1>;
 673                         dma-names = "rx", "tx";
 674                         status = "disabled";
 675                 };
 676
 677                 i2s2: i2s@1c22800 {
 678                         #sound-dai-cells = <0>;
 679                         compatible = "allwinner,sun8i-h3-i2s";
 680                         reg = <0x01c22800 0x400>;
 681                         interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 682                         clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
 683                         clock-names = "apb", "mod";
 684                         dmas = <&dma 27>;
 685                         resets = <&ccu RST_BUS_I2S2>;
 686                         dma-names = "tx";
 687                         status = "disabled";
 688                 };
 689
 690                 codec: codec@1c22c00 {
 691                         #sound-dai-cells = <0>;
 692                         compatible = "allwinner,sun8i-h3-codec";
 693                         reg = <0x01c22c00 0x400>;
 694                         interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 695                         clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
 696                         clock-names = "apb", "codec";
 697                         resets = <&ccu RST_BUS_CODEC>;
 698                         dmas = <&dma 15>, <&dma 15>;
 699                         dma-names = "rx", "tx";
 700                         allwinner,codec-analog-controls = <&codec_analog>;
 701                         status = "disabled";
 702                 };
 703
 704                 uart0: serial@1c28000 {
 705                         compatible = "snps,dw-apb-uart";
 706                         reg = <0x01c28000 0x400>;
 707                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 708                         reg-shift = <2>;
 709                         reg-io-width = <4>;
 710                         clocks = <&ccu CLK_BUS_UART0>;
 711                         resets = <&ccu RST_BUS_UART0>;
 712                         dmas = <&dma 6>, <&dma 6>;
 713                         dma-names = "tx", "rx";
 714                         status = "disabled";
 715                 };
 716
 717                 uart1: serial@1c28400 {
 718                         compatible = "snps,dw-apb-uart";
 719                         reg = <0x01c28400 0x400>;
 720                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 721                         reg-shift = <2>;
 722                         reg-io-width = <4>;
 723                         clocks = <&ccu CLK_BUS_UART1>;
 724                         resets = <&ccu RST_BUS_UART1>;
 725                         dmas = <&dma 7>, <&dma 7>;
 726                         dma-names = "tx", "rx";
 727                         status = "disabled";
 728                 };
 729
 730                 uart2: serial@1c28800 {
 731                         compatible = "snps,dw-apb-uart";
 732                         reg = <0x01c28800 0x400>;
 733                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 734                         reg-shift = <2>;
 735                         reg-io-width = <4>;
 736                         clocks = <&ccu CLK_BUS_UART2>;
 737                         resets = <&ccu RST_BUS_UART2>;
 738                         dmas = <&dma 8>, <&dma 8>;
 739                         dma-names = "tx", "rx";
 740                         status = "disabled";
 741                 };
 742
 743                 uart3: serial@1c28c00 {
 744                         compatible = "snps,dw-apb-uart";
 745                         reg = <0x01c28c00 0x400>;
 746                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 747                         reg-shift = <2>;
 748                         reg-io-width = <4>;
 749                         clocks = <&ccu CLK_BUS_UART3>;
 750                         resets = <&ccu RST_BUS_UART3>;
 751                         dmas = <&dma 9>, <&dma 9>;
 752                         dma-names = "tx", "rx";
 753                         status = "disabled";
 754                 };
 755
 756                 i2c0: i2c@1c2ac00 {
 757                         compatible = "allwinner,sun6i-a31-i2c";
 758                         reg = <0x01c2ac00 0x400>;
 759                         interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 760                         clocks = <&ccu CLK_BUS_I2C0>;
 761                         resets = <&ccu RST_BUS_I2C0>;
 762                         pinctrl-names = "default";
 763                         pinctrl-0 = <&i2c0_pins>;
 764                         status = "disabled";
 765                         #address-cells = <1>;
 766                         #size-cells = <0>;
 767                 };
 768
 769                 i2c1: i2c@1c2b000 {
 770                         compatible = "allwinner,sun6i-a31-i2c";
 771                         reg = <0x01c2b000 0x400>;
 772                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 773                         clocks = <&ccu CLK_BUS_I2C1>;
 774                         resets = <&ccu RST_BUS_I2C1>;
 775                         pinctrl-names = "default";
 776                         pinctrl-0 = <&i2c1_pins>;
 777                         status = "disabled";
 778                         #address-cells = <1>;
 779                         #size-cells = <0>;
 780                 };
 781
 782                 i2c2: i2c@1c2b400 {
 783                         compatible = "allwinner,sun6i-a31-i2c";
 784                         reg = <0x01c2b400 0x400>;
 785                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 786                         clocks = <&ccu CLK_BUS_I2C2>;
 787                         resets = <&ccu RST_BUS_I2C2>;
 788                         pinctrl-names = "default";
 789                         pinctrl-0 = <&i2c2_pins>;
 790                         status = "disabled";
 791                         #address-cells = <1>;
 792                         #size-cells = <0>;
 793                 };
 794
 795                 gic: interrupt-controller@1c81000 {
 796                         compatible = "arm,gic-400";
 797                         reg = <0x01c81000 0x1000>,
 798                               <0x01c82000 0x2000>,
 799                               <0x01c84000 0x2000>,
 800                               <0x01c86000 0x2000>;
 801                         interrupt-controller;
 802                         #interrupt-cells = <3>;
 803                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 804                 };
 805
 806                 csi: camera@1cb0000 {
 807                         compatible = "allwinner,sun8i-h3-csi";
 808                         reg = <0x01cb0000 0x1000>;
 809                         interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 810                         clocks = <&ccu CLK_BUS_CSI>,
 811                                  <&ccu CLK_CSI_SCLK>,
 812                                  <&ccu CLK_DRAM_CSI>;
 813                         clock-names = "bus", "mod", "ram";
 814                         resets = <&ccu RST_BUS_CSI>;
 815                         pinctrl-names = "default";
 816                         pinctrl-0 = <&csi_pins>;
 817                         status = "disabled";
 818                 };
 819
 820                 hdmi: hdmi@1ee0000 {
 821                         compatible = "allwinner,sun8i-h3-dw-hdmi",
 822                                      "allwinner,sun8i-a83t-dw-hdmi";
 823                         reg = <0x01ee0000 0x10000>;
 824                         reg-io-width = <1>;
 825                         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 826                         clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
 827                                  <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
 828                         clock-names = "iahb", "isfr", "tmds", "cec";
 829                         resets = <&ccu RST_BUS_HDMI1>;
 830                         reset-names = "ctrl";
 831                         phys = <&hdmi_phy>;
 832                         phy-names = "phy";
 833                         status = "disabled";
 834
 835                         ports {
 836                                 #address-cells = <1>;
 837                                 #size-cells = <0>;
 838
 839                                 hdmi_in: port@0 {
 840                                         reg = <0>;
 841
 842                                         hdmi_in_tcon0: endpoint {
 843                                                 remote-endpoint = <&tcon0_out_hdmi>;
 844                                         };
 845                                 };
 846
 847                                 hdmi_out: port@1 {
 848                                         reg = <1>;
 849                                 };
 850                         };
 851                 };
 852
 853                 hdmi_phy: hdmi-phy@1ef0000 {
 854                         compatible = "allwinner,sun8i-h3-hdmi-phy";
 855                         reg = <0x01ef0000 0x10000>;
 856                         clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
 857                                  <&ccu CLK_PLL_VIDEO>;
 858                         clock-names = "bus", "mod", "pll-0";
 859                         resets = <&ccu RST_BUS_HDMI0>;
 860                         reset-names = "phy";
 861                         #phy-cells = <0>;
 862                 };
 863
 864                 rtc: rtc@1f00000 {
 865                         /* compatible is in per SoC .dtsi file */
 866                         reg = <0x01f00000 0x400>;
 867                         interrupt-parent = <&r_intc>;
 868                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 869                                      <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 870                         clock-output-names = "osc32k", "osc32k-out", "iosc";
 871                         clocks = <&osc32k>;
 872                         #clock-cells = <1>;
 873                 };
 874
 875                 r_intc: interrupt-controller@1f00c00 {
 876                         compatible = "allwinner,sun8i-h3-r-intc",
 877                                      "allwinner,sun6i-a31-r-intc";
 878                         interrupt-controller;
 879                         #interrupt-cells = <3>;
 880                         reg = <0x01f00c00 0x400>;
 881                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 882                 };
 883
 884                 r_ccu: clock@1f01400 {
 885                         compatible = "allwinner,sun8i-h3-r-ccu";
 886                         reg = <0x01f01400 0x100>;
 887                         clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
 888                                  <&ccu CLK_PLL_PERIPH0>;
 889                         clock-names = "hosc", "losc", "iosc", "pll-periph";
 890                         #clock-cells = <1>;
 891                         #reset-cells = <1>;
 892                 };
 893
 894                 codec_analog: codec-analog@1f015c0 {
 895                         compatible = "allwinner,sun8i-h3-codec-analog";
 896                         reg = <0x01f015c0 0x4>;
 897                 };
 898
 899                 ir: ir@1f02000 {
 900                         compatible = "allwinner,sun6i-a31-ir";
 901                         clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
 902                         clock-names = "apb", "ir";
 903                         resets = <&r_ccu RST_APB0_IR>;
 904                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 905                         reg = <0x01f02000 0x400>;
 906                         status = "disabled";
 907                 };
 908
 909                 r_i2c: i2c@1f02400 {
 910                         compatible = "allwinner,sun6i-a31-i2c";
 911                         reg = <0x01f02400 0x400>;
 912                         interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 913                         pinctrl-names = "default";
 914                         pinctrl-0 = <&r_i2c_pins>;
 915                         clocks = <&r_ccu CLK_APB0_I2C>;
 916                         resets = <&r_ccu RST_APB0_I2C>;
 917                         status = "disabled";
 918                         #address-cells = <1>;
 919                         #size-cells = <0>;
 920                 };
 921
 922                 r_uart: serial@1f02800 {
 923                         compatible = "snps,dw-apb-uart";
 924                         reg = <0x01f02800 0x400>;
 925                         interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 926                         reg-shift = <2>;
 927                         reg-io-width = <4>;
 928                         clocks = <&r_ccu CLK_APB0_UART>;
 929                         resets = <&r_ccu RST_APB0_UART>;
 930                         pinctrl-names = "default";
 931                         pinctrl-0 = <&r_uart_pins>;
 932                         status = "disabled";
 933                 };
 934
 935                 r_pio: pinctrl@1f02c00 {
 936                         compatible = "allwinner,sun8i-h3-r-pinctrl";
 937                         reg = <0x01f02c00 0x400>;
 938                         interrupt-parent = <&r_intc>;
 939                         interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 940                         clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
 941                                  <&rtc CLK_OSC32K>;
 942                         clock-names = "apb", "hosc", "losc";
 943                         gpio-controller;
 944                         #gpio-cells = <3>;
 945                         interrupt-controller;
 946                         #interrupt-cells = <3>;
 947
 948                         r_ir_rx_pin: r-ir-rx-pin {
 949                                 pins = "PL11";
 950                                 function = "s_cir_rx";
 951                         };
 952
 953                         r_i2c_pins: r-i2c-pins {
 954                                 pins = "PL0", "PL1";
 955                                 function = "s_i2c";
 956                         };
 957
 958                         r_pwm_pin: r-pwm-pin {
 959                                 pins = "PL10";
 960                                 function = "s_pwm";
 961                         };
 962
 963                         r_uart_pins: r-uart-pins {
 964                                 pins = "PL2", "PL3";
 965                                 function = "s_uart";
 966                         };
 967                 };
 968
 969                 r_pwm: pwm@1f03800 {
 970                         compatible = "allwinner,sun8i-h3-pwm";
 971                         reg = <0x01f03800 0x8>;
 972                         pinctrl-names = "default";
 973                         pinctrl-0 = <&r_pwm_pin>;
 974                         clocks = <&osc24M>;
 975                         #pwm-cells = <3>;
 976                         status = "disabled";
 977                 };
 978         };
 979 };