arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 #include "qcom-msm8974pro.dtsi"
   3 #include "pm8841.dtsi"
   4 #include "pm8941.dtsi"
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/leds/common.h>
   7 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
   8
   9 / {
  10         model = "Sony Xperia Z2 Tablet";
  11         compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974";
  12         chassis-type = "tablet";
  13
  14         aliases {
  15                 serial0 = &blsp1_uart2;
  16                 serial1 = &blsp2_uart1;
  17         };
  18
  19         chosen {
  20                 stdout-path = "serial0:115200n8";
  21         };
  22
  23         gpio-keys {
  24                 compatible = "gpio-keys";
  25
  26                 pinctrl-names = "default";
  27                 pinctrl-0 = <&gpio_keys_pin_a>;
  28
  29                 key-volume-down {
  30                         label = "volume_down";
  31                         gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
  32                         linux,input-type = <1>;
  33                         linux,code = <KEY_VOLUMEDOWN>;
  34                 };
  35
  36                 key-camera-snapshot {
  37                         label = "camera_snapshot";
  38                         gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
  39                         linux,input-type = <1>;
  40                         linux,code = <KEY_CAMERA>;
  41                 };
  42
  43                 key-camera-focus {
  44                         label = "camera_focus";
  45                         gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
  46                         linux,input-type = <1>;
  47                         linux,code = <KEY_CAMERA_FOCUS>;
  48                 };
  49
  50                 key-volume-up {
  51                         label = "volume_up";
  52                         gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
  53                         linux,input-type = <1>;
  54                         linux,code = <KEY_VOLUMEUP>;
  55                 };
  56         };
  57
  58         vreg_bl_vddio: lcd-backlight-vddio {
  59                 compatible = "regulator-fixed";
  60                 regulator-name = "vreg_bl_vddio";
  61                 regulator-min-microvolt = <3150000>;
  62                 regulator-max-microvolt = <3150000>;
  63
  64                 gpio = <&tlmm 69 0>;
  65                 enable-active-high;
  66
  67                 vin-supply = <&pm8941_s3>;
  68                 startup-delay-us = <70000>;
  69
  70                 pinctrl-names = "default";
  71                 pinctrl-0 = <&lcd_backlight_en_pin_a>;
  72         };
  73
  74         vreg_vsp: lcd-dcdc-regulator {
  75                 compatible = "regulator-fixed";
  76                 regulator-name = "vreg_vsp";
  77                 regulator-min-microvolt = <5600000>;
  78                 regulator-max-microvolt = <5600000>;
  79
  80                 gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
  81                 enable-active-high;
  82
  83                 pinctrl-names = "default";
  84                 pinctrl-0 = <&lcd_dcdc_en_pin_a>;
  85         };
  86
  87         vreg_boost: vreg-boost {
  88                 compatible = "regulator-fixed";
  89
  90                 regulator-name = "vreg-boost";
  91                 regulator-min-microvolt = <3150000>;
  92                 regulator-max-microvolt = <3150000>;
  93
  94                 regulator-always-on;
  95                 regulator-boot-on;
  96
  97                 gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
  98                 enable-active-high;
  99
 100                 pinctrl-names = "default";
 101                 pinctrl-0 = <&boost_bypass_n_pin>;
 102         };
 103
 104         vreg_vph_pwr: vreg-vph-pwr {
 105                 compatible = "regulator-fixed";
 106                 regulator-name = "vph-pwr";
 107
 108                 regulator-min-microvolt = <3600000>;
 109                 regulator-max-microvolt = <3600000>;
 110
 111                 regulator-always-on;
 112         };
 113
 114         vreg_wlan: wlan-regulator {
 115                 compatible = "regulator-fixed";
 116
 117                 regulator-name = "wl-reg";
 118                 regulator-min-microvolt = <3300000>;
 119                 regulator-max-microvolt = <3300000>;
 120
 121                 gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
 122                 enable-active-high;
 123
 124                 pinctrl-names = "default";
 125                 pinctrl-0 = <&wlan_regulator_pin>;
 126         };
 127 };
 128
 129 &blsp1_uart2 {
 130         status = "okay";
 131 };
 132
 133 &blsp2_i2c2 {
 134         status = "okay";
 135         clock-frequency = <355000>;
 136
 137         synaptics@2c {
 138                 compatible = "syna,rmi4-i2c";
 139                 reg = <0x2c>;
 140
 141                 interrupt-parent = <&tlmm>;
 142                 interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
 143
 144                 #address-cells = <1>;
 145                 #size-cells = <0>;
 146
 147                 vdd-supply = <&pm8941_l22>;
 148                 vio-supply = <&pm8941_lvs3>;
 149
 150                 pinctrl-names = "default";
 151                 pinctrl-0 = <&ts_int_pin>;
 152
 153                 syna,startup-delay-ms = <100>;
 154
 155                 rmi4-f01@1 {
 156                         reg = <0x1>;
 157                         syna,nosleep-mode = <1>;
 158                 };
 159
 160                 rmi4-f11@11 {
 161                         reg = <0x11>;
 162                         syna,sensor-type = <1>;
 163                         touchscreen-inverted-x;
 164                 };
 165         };
 166 };
 167
 168 &blsp2_i2c5 {
 169         status = "okay";
 170         clock-frequency = <355000>;
 171
 172         lp8566_wled: backlight@2c {
 173                 compatible = "ti,lp8556";
 174                 reg = <0x2c>;
 175                 power-supply = <&vreg_bl_vddio>;
 176
 177                 bl-name = "backlight";
 178                 dev-ctrl = /bits/ 8 <0x05>;
 179                 init-brt = /bits/ 8 <0x3f>;
 180
 181                 rom-a0h {
 182                         rom-addr = /bits/ 8 <0xa0>;
 183                         rom-val = /bits/ 8 <0xff>;
 184                 };
 185                 rom-a1h {
 186                         rom-addr = /bits/ 8 <0xa1>;
 187                         rom-val = /bits/ 8 <0x3f>;
 188                 };
 189                 rom-a2h {
 190                         rom-addr = /bits/ 8 <0xa2>;
 191                         rom-val = /bits/ 8 <0x20>;
 192                 };
 193                 rom-a3h {
 194                         rom-addr = /bits/ 8 <0xa3>;
 195                         rom-val = /bits/ 8 <0x5e>;
 196                 };
 197                 rom-a4h {
 198                         rom-addr = /bits/ 8 <0xa4>;
 199                         rom-val = /bits/ 8 <0x02>;
 200                 };
 201                 rom-a5h {
 202                         rom-addr = /bits/ 8 <0xa5>;
 203                         rom-val = /bits/ 8 <0x04>;
 204                 };
 205                 rom-a6h {
 206                         rom-addr = /bits/ 8 <0xa6>;
 207                         rom-val = /bits/ 8 <0x80>;
 208                 };
 209                 rom-a7h {
 210                         rom-addr = /bits/ 8 <0xa7>;
 211                         rom-val = /bits/ 8 <0xf7>;
 212                 };
 213                 rom-a9h {
 214                         rom-addr = /bits/ 8 <0xa9>;
 215                         rom-val = /bits/ 8 <0x80>;
 216                 };
 217                 rom-aah {
 218                         rom-addr = /bits/ 8 <0xaa>;
 219                         rom-val = /bits/ 8 <0x0f>;
 220                 };
 221                 rom-aeh {
 222                         rom-addr = /bits/ 8 <0xae>;
 223                         rom-val = /bits/ 8 <0x0f>;
 224                 };
 225         };
 226 };
 227
 228 &blsp2_uart1 {
 229         status = "okay";
 230
 231         bluetooth {
 232                 compatible = "brcm,bcm43438-bt";
 233                 max-speed = <3000000>;
 234
 235                 pinctrl-names = "default";
 236                 pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
 237
 238                 host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
 239                 device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 240                 shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
 241         };
 242 };
 243
 244 &pm8941_coincell {
 245         status = "okay";
 246
 247         qcom,rset-ohms = <2100>;
 248         qcom,vset-millivolts = <3000>;
 249 };
 250
 251 &pm8941_gpios {
 252         gpio_keys_pin_a: gpio-keys-active-state {
 253                 pins = "gpio2", "gpio5";
 254                 function = "normal";
 255
 256                 bias-pull-up;
 257                 power-source = <PM8941_GPIO_S3>;
 258         };
 259
 260         bt_reg_on_pin: bt-reg-on-state {
 261                 pins = "gpio16";
 262                 function = "normal";
 263
 264                 output-low;
 265                 power-source = <PM8941_GPIO_S3>;
 266         };
 267
 268         wlan_sleep_clk_pin: wl-sleep-clk-state {
 269                 pins = "gpio17";
 270                 function = "func2";
 271
 272                 output-high;
 273                 power-source = <PM8941_GPIO_S3>;
 274         };
 275
 276         wlan_regulator_pin: wl-reg-active-state {
 277                 pins = "gpio18";
 278                 function = "normal";
 279
 280                 bias-disable;
 281                 power-source = <PM8941_GPIO_S3>;
 282         };
 283
 284         lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
 285                 pins = "gpio20";
 286                 function = "normal";
 287
 288                 bias-disable;
 289                 power-source = <PM8941_GPIO_S3>;
 290                 input-disable;
 291                 output-low;
 292         };
 293
 294 };
 295
 296 &pm8941_lpg {
 297         status = "okay";
 298
 299         qcom,power-source = <1>;
 300
 301         multi-led {
 302                 color = <LED_COLOR_ID_RGB>;
 303                 function = LED_FUNCTION_STATUS;
 304
 305                 #address-cells = <1>;
 306                 #size-cells = <0>;
 307
 308                 led@5 {
 309                         reg = <5>;
 310                         color = <LED_COLOR_ID_BLUE>;
 311                 };
 312
 313                 led@6 {
 314                         reg = <6>;
 315                         color = <LED_COLOR_ID_GREEN>;
 316                 };
 317
 318                 led@7 {
 319                         reg = <7>;
 320                         color = <LED_COLOR_ID_RED>;
 321                 };
 322         };
 323 };
 324
 325 &remoteproc_adsp {
 326         cx-supply = <&pm8841_s2>;
 327         status = "okay";
 328 };
 329
 330 &remoteproc_mss {
 331         cx-supply = <&pm8841_s2>;
 332         mss-supply = <&pm8841_s3>;
 333         mx-supply = <&pm8841_s1>;
 334         pll-supply = <&pm8941_l12>;
 335         status = "okay";
 336 };
 337
 338 &rpm_requests {
 339         regulators-0 {
 340                 compatible = "qcom,rpm-pm8841-regulators";
 341
 342                 pm8841_s1: s1 {
 343                         regulator-min-microvolt = <675000>;
 344                         regulator-max-microvolt = <1050000>;
 345                 };
 346
 347                 pm8841_s2: s2 {
 348                         regulator-min-microvolt = <500000>;
 349                         regulator-max-microvolt = <1050000>;
 350                 };
 351
 352                 pm8841_s3: s3 {
 353                         regulator-min-microvolt = <500000>;
 354                         regulator-max-microvolt = <1050000>;
 355                 };
 356
 357                 pm8841_s4: s4 {
 358                         regulator-min-microvolt = <500000>;
 359                         regulator-max-microvolt = <1050000>;
 360                 };
 361         };
 362
 363         regulators-1 {
 364                 compatible = "qcom,rpm-pm8941-regulators";
 365
 366                 vdd_l1_l3-supply = <&pm8941_s1>;
 367                 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
 368                 vdd_l4_l11-supply = <&pm8941_s1>;
 369                 vdd_l5_l7-supply = <&pm8941_s2>;
 370                 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
 371                 vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
 372                 vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
 373                 vdd_l21-supply = <&vreg_boost>;
 374
 375                 pm8941_s1: s1 {
 376                         regulator-min-microvolt = <1300000>;
 377                         regulator-max-microvolt = <1300000>;
 378                         regulator-always-on;
 379                         regulator-boot-on;
 380                 };
 381
 382                 pm8941_s2: s2 {
 383                         regulator-min-microvolt = <2150000>;
 384                         regulator-max-microvolt = <2150000>;
 385                         regulator-boot-on;
 386                 };
 387
 388                 pm8941_s3: s3 {
 389                         regulator-min-microvolt = <1800000>;
 390                         regulator-max-microvolt = <1800000>;
 391                         regulator-system-load = <154000>;
 392                         regulator-always-on;
 393                         regulator-boot-on;
 394                 };
 395
 396                 pm8941_s4: s4 {
 397                         regulator-min-microvolt = <5000000>;
 398                         regulator-max-microvolt = <5000000>;
 399                 };
 400
 401                 pm8941_l1: l1 {
 402                         regulator-min-microvolt = <1225000>;
 403                         regulator-max-microvolt = <1225000>;
 404                         regulator-always-on;
 405                         regulator-boot-on;
 406                 };
 407
 408                 pm8941_l2: l2 {
 409                         regulator-min-microvolt = <1200000>;
 410                         regulator-max-microvolt = <1200000>;
 411                 };
 412
 413                 pm8941_l3: l3 {
 414                         regulator-min-microvolt = <1200000>;
 415                         regulator-max-microvolt = <1200000>;
 416                 };
 417
 418                 pm8941_l4: l4 {
 419                         regulator-min-microvolt = <1225000>;
 420                         regulator-max-microvolt = <1225000>;
 421                 };
 422
 423                 pm8941_l5: l5 {
 424                         regulator-min-microvolt = <1800000>;
 425                         regulator-max-microvolt = <1800000>;
 426                 };
 427
 428                 pm8941_l6: l6 {
 429                         regulator-min-microvolt = <1800000>;
 430                         regulator-max-microvolt = <1800000>;
 431                         regulator-boot-on;
 432                 };
 433
 434                 pm8941_l7: l7 {
 435                         regulator-min-microvolt = <1800000>;
 436                         regulator-max-microvolt = <1800000>;
 437                         regulator-boot-on;
 438                 };
 439
 440                 pm8941_l8: l8 {
 441                         regulator-min-microvolt = <1800000>;
 442                         regulator-max-microvolt = <1800000>;
 443                 };
 444
 445                 pm8941_l9: l9 {
 446                         regulator-min-microvolt = <1800000>;
 447                         regulator-max-microvolt = <2950000>;
 448                 };
 449
 450                 pm8941_l11: l11 {
 451                         regulator-min-microvolt = <1300000>;
 452                         regulator-max-microvolt = <1350000>;
 453                 };
 454
 455                 pm8941_l12: l12 {
 456                         regulator-min-microvolt = <1800000>;
 457                         regulator-max-microvolt = <1800000>;
 458                         regulator-always-on;
 459                         regulator-boot-on;
 460                 };
 461
 462                 pm8941_l13: l13 {
 463                         regulator-min-microvolt = <1800000>;
 464                         regulator-max-microvolt = <2950000>;
 465                         regulator-boot-on;
 466                 };
 467
 468                 pm8941_l14: l14 {
 469                         regulator-min-microvolt = <1800000>;
 470                         regulator-max-microvolt = <1800000>;
 471                 };
 472
 473                 pm8941_l15: l15 {
 474                         regulator-min-microvolt = <2050000>;
 475                         regulator-max-microvolt = <2050000>;
 476                 };
 477
 478                 pm8941_l16: l16 {
 479                         regulator-min-microvolt = <2700000>;
 480                         regulator-max-microvolt = <2700000>;
 481                 };
 482
 483                 pm8941_l17: l17 {
 484                         regulator-min-microvolt = <2700000>;
 485                         regulator-max-microvolt = <2700000>;
 486                 };
 487
 488                 pm8941_l18: l18 {
 489                         regulator-min-microvolt = <2850000>;
 490                         regulator-max-microvolt = <2850000>;
 491                 };
 492
 493                 pm8941_l19: l19 {
 494                         regulator-min-microvolt = <2850000>;
 495                         regulator-max-microvolt = <2850000>;
 496                 };
 497
 498                 pm8941_l20: l20 {
 499                         regulator-min-microvolt = <2950000>;
 500                         regulator-max-microvolt = <2950000>;
 501                         regulator-system-load = <500000>;
 502                         regulator-allow-set-load;
 503                         regulator-boot-on;
 504                 };
 505
 506                 pm8941_l21: l21 {
 507                         regulator-min-microvolt = <2950000>;
 508                         regulator-max-microvolt = <2950000>;
 509                         regulator-boot-on;
 510                 };
 511
 512                 pm8941_l22: l22 {
 513                         regulator-min-microvolt = <3000000>;
 514                         regulator-max-microvolt = <3000000>;
 515                 };
 516
 517                 pm8941_l23: l23 {
 518                         regulator-min-microvolt = <2800000>;
 519                         regulator-max-microvolt = <2800000>;
 520                 };
 521
 522                 pm8941_l24: l24 {
 523                         regulator-min-microvolt = <3075000>;
 524                         regulator-max-microvolt = <3075000>;
 525                         regulator-boot-on;
 526                 };
 527
 528                 pm8941_lvs3: lvs3 {};
 529         };
 530 };
 531
 532 &sdhc_1 {
 533         status = "okay";
 534
 535         vmmc-supply = <&pm8941_l20>;
 536         vqmmc-supply = <&pm8941_s3>;
 537
 538         pinctrl-names = "default", "sleep";
 539         pinctrl-0 = <&sdc1_on>;
 540         pinctrl-1 = <&sdc1_off>;
 541 };
 542
 543 &sdhc_2 {
 544         status = "okay";
 545
 546         vmmc-supply = <&pm8941_l21>;
 547         vqmmc-supply = <&pm8941_l13>;
 548
 549         cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
 550
 551         pinctrl-names = "default", "sleep";
 552         pinctrl-0 = <&sdc2_on>;
 553         pinctrl-1 = <&sdc2_off>;
 554 };
 555
 556 &sdhc_3 {
 557         status = "okay";
 558
 559         max-frequency = <100000000>;
 560         vmmc-supply = <&vreg_wlan>;
 561         non-removable;
 562
 563         pinctrl-names = "default";
 564         pinctrl-0 = <&sdc3_on>;
 565
 566         #address-cells = <1>;
 567         #size-cells = <0>;
 568
 569         bcrmf@1 {
 570                 compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
 571                 reg = <1>;
 572
 573                 brcm,drive-strength = <10>;
 574
 575                 pinctrl-names = "default";
 576                 pinctrl-0 = <&wlan_sleep_clk_pin>;
 577         };
 578 };
 579
 580 &smbb {
 581         qcom,fast-charge-safe-current = <1500000>;
 582         qcom,fast-charge-current-limit = <1500000>;
 583         qcom,dc-current-limit = <1800000>;
 584         usb-charge-current-limit = <1800000>;
 585         qcom,fast-charge-safe-voltage = <4400000>;
 586         qcom,fast-charge-high-threshold-voltage = <4350000>;
 587         qcom,fast-charge-low-threshold-voltage = <3400000>;
 588         qcom,auto-recharge-threshold-voltage = <4200000>;
 589         qcom,minimum-input-voltage = <4300000>;
 590
 591         status = "okay";
 592 };
 593
 594 &tlmm {
 595         lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
 596                 pins = "gpio69";
 597                 function = "gpio";
 598                 drive-strength = <10>;
 599                 output-low;
 600                 bias-disable;
 601         };
 602
 603         sdc1_on: sdc1-on-state {
 604                 clk-pins {
 605                         pins = "sdc1_clk";
 606                         drive-strength = <16>;
 607                         bias-disable;
 608                 };
 609
 610                 cmd-data-pins {
 611                         pins = "sdc1_cmd", "sdc1_data";
 612                         drive-strength = <10>;
 613                         bias-pull-up;
 614                 };
 615         };
 616
 617         sdc2_on: sdc2-on-state {
 618                 clk-pins {
 619                         pins = "sdc2_clk";
 620                         drive-strength = <6>;
 621                         bias-disable;
 622                 };
 623
 624                 cmd-data-pins {
 625                         pins = "sdc2_cmd", "sdc2_data";
 626                         drive-strength = <6>;
 627                         bias-pull-up;
 628                 };
 629
 630                 cd-pins {
 631                         pins = "gpio62";
 632                         function = "gpio";
 633                         drive-strength = <2>;
 634                         bias-disable;
 635                 };
 636         };
 637
 638         sdc3_on: sdc3-on-state {
 639                 clk-pins {
 640                         pins = "gpio40";
 641                         function = "sdc3";
 642                         drive-strength = <10>;
 643                         bias-disable;
 644                 };
 645
 646                 cmd-pins {
 647                         pins = "gpio39";
 648                         function = "sdc3";
 649                         drive-strength = <10>;
 650                         bias-pull-up;
 651                 };
 652
 653                 data-pins {
 654                         pins = "gpio35", "gpio36", "gpio37", "gpio38";
 655                         function = "sdc3";
 656                         drive-strength = <10>;
 657                         bias-pull-up;
 658                 };
 659         };
 660
 661         ts_int_pin: ts-int-pin-state {
 662                 pins = "gpio86";
 663                 function = "gpio";
 664                 drive-strength = <2>;
 665                 bias-disable;
 666         };
 667
 668         bt_host_wake_pin: bt-host-wake-state {
 669                 pins = "gpio95";
 670                 function = "gpio";
 671                 drive-strength = <2>;
 672                 bias-disable;
 673                 output-low;
 674         };
 675
 676         bt_dev_wake_pin: bt-dev-wake-state {
 677                 pins = "gpio96";
 678                 function = "gpio";
 679                 drive-strength = <2>;
 680                 bias-disable;
 681         };
 682 };
 683
 684 &usb {
 685         status = "okay";
 686
 687         phys = <&usb_hs1_phy>;
 688         phy-select = <&tcsr 0xb000 0>;
 689         extcon = <&smbb>, <&usb_id>;
 690         vbus-supply = <&chg_otg>;
 691
 692         hnp-disable;
 693         srp-disable;
 694         adp-disable;
 695 };
 696
 697 &usb_hs1_phy {
 698         status = "okay";
 699
 700         v1p8-supply = <&pm8941_l6>;
 701         v3p3-supply = <&pm8941_l24>;
 702
 703         extcon = <&smbb>;
 704         qcom,init-seq = /bits/ 8 <0x1 0x64>;
 705 };