arch/arm/boot/dts/ti/omap/dra76x.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
   4  */
   5
   6 #include "dra74x.dtsi"
   7
   8 / {
   9         compatible = "ti,dra762", "ti,dra7";
  10
  11         ocp {
  12                 target-module@42c01900 {
  13                         compatible = "ti,sysc-dra7-mcan", "ti,sysc";
  14                         ranges = <0x0 0x42c00000 0x2000>;
  15                         #address-cells = <1>;
  16                         #size-cells = <1>;
  17                         reg = <0x42c01900 0x4>,
  18                               <0x42c01904 0x4>,
  19                               <0x42c01908 0x4>;
  20                         reg-names = "rev", "sysc", "syss";
  21                         ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET |
  22                                          SYSC_DRA7_MCAN_ENAWAKEUP)>;
  23                         ti,syss-mask = <1>;
  24                         clocks = <&wkupaon_clkctrl DRA7_WKUPAON_ADC_CLKCTRL 0>;
  25                         clock-names = "fck";
  26
  27                         m_can0: mcan@1a00 {
  28                                 compatible = "bosch,m_can";
  29                                 reg = <0x1a00 0x4000>, <0x0 0x18FC>;
  30                                 reg-names = "m_can", "message_ram";
  31                                 interrupt-parent = <&gic>;
  32                                 interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
  33                                              <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
  34                                 interrupt-names = "int0", "int1";
  35                                 clocks = <&l3_iclk_div>, <&mcan_clk>;
  36                                 clock-names = "hclk", "cclk";
  37                                 bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
  38                         };
  39                 };
  40         };
  41
  42 };
  43
  44 &l4_per3 {
  45         target-module@1b0000 {                  /* 0x489b0000, ap 25 34.0 */
  46                 compatible = "ti,sysc-omap4", "ti,sysc";
  47                 reg = <0x1b0000 0x4>,
  48                       <0x1b0010 0x4>;
  49                 reg-names = "rev", "sysc";
  50                 ti,sysc-midle = <SYSC_IDLE_FORCE>,
  51                                 <SYSC_IDLE_NO>;
  52                 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
  53                                 <SYSC_IDLE_NO>;
  54                 clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
  55                 clock-names = "fck";
  56                 #address-cells = <1>;
  57                 #size-cells = <1>;
  58                 ranges = <0x0 0x1b0000 0x10000>;
  59
  60                 cal: cal@0 {
  61                         compatible = "ti,dra76-cal";
  62                         reg = <0x0000 0x400>,
  63                               <0x0800 0x40>,
  64                               <0x0900 0x40>;
  65                         reg-names = "cal_top",
  66                                     "cal_rx_core0",
  67                                     "cal_rx_core1";
  68                         interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
  69                         ti,camerrx-control = <&scm_conf 0x6dc>;
  70
  71                         ports {
  72                                 #address-cells = <1>;
  73                                 #size-cells = <0>;
  74
  75                                 csi2_0: port@0 {
  76                                         reg = <0>;
  77                                 };
  78                                 csi2_1: port@1 {
  79                                         reg = <1>;
  80                                 };
  81                         };
  82                 };
  83         };
  84 };
  85
  86 &scm_conf_clocks {
  87         /* CTRL_CORE_SMA_SW_0 */
  88         clock@3fc {
  89                 compatible = "ti,clksel";
  90                 reg = <0x3fc>;
  91                 #clock-cells = <2>;
  92                 #address-cells = <1>;
  93                 #size-cells = <0>;
  94
  95                 dpll_gmac_h14x2_ctrl_ck: clock@20 {
  96                         reg = <20>;
  97                         clock-output-names = "dpll_gmac_h14x2_ctrl_ck";
  98                         compatible = "ti,divider-clock";
  99                         clocks = <&dpll_gmac_x2_ck>;
 100                         ti,max-div = <63>;
 101                         ti,latch-bit = <26>;
 102                         assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
 103                         assigned-clock-rates = <80000000>;
 104                         #clock-cells = <0>;
 105                 };
 106
 107                 mcan_clk: clock@27 {
 108                         reg = <27>;
 109                         clock-output-names = "mcan_clk";
 110                         compatible = "ti,gate-clock";
 111                         clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
 112                         #clock-cells = <0>;
 113                 };
 114
 115                 dpll_gmac_h14x2_ctrl_mux_ck: clock@29 {
 116                         reg = <29>;
 117                         clock-output-names = "dpll_gmac_h14x2_ctrl_mux_ck";
 118                         compatible = "ti,mux-clock";
 119                         clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
 120                         ti,latch-bit = <26>;
 121                         assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
 122                         assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
 123                         #clock-cells = <0>;
 124                 };
 125         };
 126 };
 127
 128 &rtctarget {
 129         status = "disabled";
 130 };
 131
 132 &usb4_tm {
 133         status = "disabled";
 134 };
 135
 136 &mmc3 {
 137         /* dra76x is not affected by i887 */
 138         max-frequency = <96000000>;
 139 };
 140
 141 &cpu0_opp_table {
 142         opp-1800000000 {
 143                 /* OPP Plus */
 144                 opp-hz = /bits/ 64 <1800000000>;
 145                 opp-microvolt = <1250000 950000 1250000>,
 146                                 <1250000 950000 1250000>;
 147                 opp-supported-hw = <0xFF 0x08>;
 148         };
 149 };
 150
 151 &opp_supply_mpu {
 152         ti,efuse-settings = <
 153         /* uV   offset */
 154         1060000 0x0
 155         1160000 0x4
 156         1210000 0x8
 157         1250000 0xC
 158         >;
 159 };
 160
 161 &abb_mpu {
 162         ti,abb_info = <
 163         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
 164         1060000         0       0x0     0 0x02000000 0x01F00000
 165         1160000         0       0x4     0 0x02000000 0x01F00000
 166         1210000         0       0x8     0 0x02000000 0x01F00000
 167         1250000         0       0xC     0 0x02000000 0x01F00000
 168         >;
 169 };