arch/arm/include/debug/brcmstb.S

   1 /* SPDX-License-Identifier: GPL-2.0-only */
   2 /* Copyright (C) 2016 Broadcom */
   3 #include <linux/serial_reg.h>
   4 #include <asm/cputype.h>
   5
   6 /* Physical register offset and virtual register offset */
   7 #define REG_PHYS_BASE           0xf0000000
   8 #define REG_PHYS_BASE_V7        0x08000000
   9 #define REG_VIRT_BASE           0xfc000000
  10 #define REG_PHYS_ADDR(x)        ((x) + REG_PHYS_BASE)
  11 #define REG_PHYS_ADDR_V7(x)     ((x) + REG_PHYS_BASE_V7)
  12
  13 /* Product id can be read from here */
  14 #define SUN_TOP_CTRL_BASE       REG_PHYS_ADDR(0x404000)
  15 #define SUN_TOP_CTRL_BASE_V7    REG_PHYS_ADDR_V7(0x404000)
  16
  17 #define UARTA_3390              REG_PHYS_ADDR(0x40a900)
  18 #define UARTA_72116             UARTA_7255
  19 #define UARTA_7250              REG_PHYS_ADDR(0x40b400)
  20 #define UARTA_7255              REG_PHYS_ADDR(0x40c000)
  21 #define UARTA_7260              UARTA_7255
  22 #define UARTA_7268              UARTA_7255
  23 #define UARTA_7271              UARTA_7268
  24 #define UARTA_7278              REG_PHYS_ADDR_V7(0x40c000)
  25 #define UARTA_7216              UARTA_7278
  26 #define UARTA_72164             UARTA_7278
  27 #define UARTA_72165             UARTA_7278
  28 #define UARTA_7364              REG_PHYS_ADDR(0x40b000)
  29 #define UARTA_7366              UARTA_7364
  30 #define UARTA_74165             UARTA_7278
  31 #define UARTA_74371             REG_PHYS_ADDR(0x406b00)
  32 #define UARTA_7439              REG_PHYS_ADDR(0x40a900)
  33 #define UARTA_7445              REG_PHYS_ADDR(0x40ab00)
  34
  35 #define UART_SHIFT              2
  36
  37 #define checkuart(rp, rv, family_id, family) \
  38                 /* Load family id */ \
  39                 ldr     rp, =family_id ; \
  40                 /* Compare SUN_TOP_CTRL value against it */ \
  41                 cmp     rp, rv ; \
  42                 /* Passed test, load address */ \
  43                 ldreq   rp, =UARTA_##family ; \
  44                 /* Jump to save UART address */ \
  45                 beq     91f
  46
  47                 .macro  addruart, rp, rv, tmp
  48                 adr     \rp, 99f                @ actual addr of 99f
  49                 ldr     \rv, [\rp]              @ linked addr is stored there
  50                 sub     \rv, \rv, \rp           @ offset between the two
  51                 ldr     \rp, [\rp, #4]          @ linked brcmstb_uart_config
  52                 sub     \tmp, \rp, \rv          @ actual brcmstb_uart_config
  53                 ldr     \rp, [\tmp]             @ Load brcmstb_uart_config
  54                 cmp     \rp, #1                 @ needs initialization?
  55                 bne     100f                    @ no; go load the addresses
  56                 mov     \rv, #0                 @ yes; record init is done
  57                 str     \rv, [\tmp]
  58
  59                 /* Check for V7 memory map if B53 */
  60                 mrc     p15, 0, \rv, c0, c0, 0  @ get Main ID register
  61                 ldr     \rp, =ARM_CPU_PART_MASK
  62                 and     \rv, \rv, \rp
  63                 ldr     \rp, =ARM_CPU_PART_BRAHMA_B53   @ check for B53 CPU
  64                 cmp     \rv, \rp
  65                 bne     10f
  66
  67                 /* if PERIPHBASE doesn't overlap REG_PHYS_BASE use V7 map */
  68                 mrc     p15, 1, \rv, c15, c3, 0 @ get PERIPHBASE from CBAR
  69                 ands    \rv, \rv, #REG_PHYS_BASE
  70                 ldreq   \rp, =SUN_TOP_CTRL_BASE_V7
  71
  72                 /* Check SUN_TOP_CTRL base */
  73 10:             ldrne   \rp, =SUN_TOP_CTRL_BASE @ load SUN_TOP_CTRL PA
  74                 ldr     \rv, [\rp, #0]          @ get register contents
  75 ARM_BE8(        rev     \rv, \rv )
  76                 and     \rv, \rv, #0xffffff00   @ strip revision bits [7:0]
  77
  78                 /* Chip specific detection starts here */
  79 20:             checkuart(\rp, \rv, 0x33900000, 3390)
  80 21:             checkuart(\rp, \rv, 0x07211600, 72116)
  81 22:             checkuart(\rp, \rv, 0x72160000, 7216)
  82 23:             checkuart(\rp, \rv, 0x07216400, 72164)
  83 24:             checkuart(\rp, \rv, 0x07216500, 72165)
  84 25:             checkuart(\rp, \rv, 0x72500000, 7250)
  85 26:             checkuart(\rp, \rv, 0x72550000, 7255)
  86 27:             checkuart(\rp, \rv, 0x72600000, 7260)
  87 28:             checkuart(\rp, \rv, 0x72680000, 7268)
  88 29:             checkuart(\rp, \rv, 0x72710000, 7271)
  89 30:             checkuart(\rp, \rv, 0x72780000, 7278)
  90 31:             checkuart(\rp, \rv, 0x73640000, 7364)
  91 32:             checkuart(\rp, \rv, 0x73660000, 7366)
  92 33:             checkuart(\rp, \rv, 0x07416500, 74165)
  93 34:             checkuart(\rp, \rv, 0x07437100, 74371)
  94 35:             checkuart(\rp, \rv, 0x74390000, 7439)
  95 36:             checkuart(\rp, \rv, 0x74450000, 7445)
  96
  97                 /* No valid UART found */
  98 90:             mov     \rp, #0
  99                 /* fall through */
 100
 101                 /* Record whichever UART we chose */
 102 91:             str     \rp, [\tmp, #4]         @ Store in brcmstb_uart_phys
 103                 cmp     \rp, #0                 @ Valid UART address?
 104                 bne     92f                     @ Yes, go process it
 105                 str     \rp, [\tmp, #8]         @ Store 0 in brcmstb_uart_virt
 106                 b       100f                    @ Done
 107 92:             and     \rv, \rp, #0xffffff     @ offset within 16MB section
 108                 add     \rv, \rv, #REG_VIRT_BASE
 109                 str     \rv, [\tmp, #8]         @ Store in brcmstb_uart_virt
 110                 b       100f
 111
 112                 .align
 113 99:             .word   .
 114                 .word   brcmstb_uart_config
 115                 .ltorg
 116
 117                 /* Load previously selected UART address */
 118 100:            ldr     \rp, [\tmp, #4]         @ Load brcmstb_uart_phys
 119                 ldr     \rv, [\tmp, #8]         @ Load brcmstb_uart_virt
 120                 .endm
 121
 122                 .macro  store, rd, rx:vararg
 123 ARM_BE8(        rev     \rd, \rd )
 124                 str     \rd, \rx
 125                 .endm
 126
 127                 .macro  load, rd, rx:vararg
 128                 ldr     \rd, \rx
 129 ARM_BE8(        rev     \rd, \rd )
 130                 .endm
 131
 132                 .macro  senduart,rd,rx
 133                 store   \rd, [\rx, #UART_TX << UART_SHIFT]
 134                 .endm
 135
 136                 .macro  busyuart,rd,rx
 137 1002:           load    \rd, [\rx, #UART_LSR << UART_SHIFT]
 138                 and     \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
 139                 teq     \rd, #UART_LSR_TEMT | UART_LSR_THRE
 140                 bne     1002b
 141                 .endm
 142
 143                 .macro  waituarttxrdy,rd,rx
 144                 .endm
 145
 146                 .macro  waituartcts,rd,rx
 147                 .endm
 148
 149 /*
 150  * Storage for the state maintained by the macros above.
 151  *
 152  * In the kernel proper, this data is located in arch/arm/mach-bcm/brcmstb.c.
 153  * That's because this header is included from multiple files, and we only
 154  * want a single copy of the data. In particular, the UART probing code above
 155  * assumes it's running using physical addresses. This is true when this file
 156  * is included from head.o, but not when included from debug.o. So we need
 157  * to share the probe results between the two copies, rather than having
 158  * to re-run the probing again later.
 159  *
 160  * In the decompressor, we put the symbol/storage right here, since common.c
 161  * isn't included in the decompressor build. This symbol gets put in .text
 162  * even though it's really data, since .data is discarded from the
 163  * decompressor. Luckily, .text is writeable in the decompressor, unless
 164  * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug.
 165  */
 166 #if defined(ZIMAGE)
 167 brcmstb_uart_config:
 168         /* Debug UART initialization required */
 169         .word 1
 170         /* Debug UART physical address */
 171         .word 0
 172         /* Debug UART virtual address */
 173         .word 0
 174 #endif