arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2
   3 /dts-v1/;
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/linux-event-codes.h>
   7 #include <dt-bindings/leds/common.h>
   8 #include <dt-bindings/pinctrl/rockchip.h>
   9 #include <dt-bindings/soc/rockchip,vop2.h>
  10 #include "rk3566.dtsi"
  11
  12 / {
  13         chosen: chosen {
  14                 stdout-path = "serial2:1500000n8";
  15         };
  16
  17         adc_keys: adc-keys {
  18                 compatible = "adc-keys";
  19                 io-channels = <&saradc 0>;
  20                 io-channel-names = "buttons";
  21                 keyup-threshold-microvolt = <1800000>;
  22                 poll-interval = <60>;
  23
  24                 /*
  25                  * Button is mapped to F key in BSP kernel, but
  26                  * according to input guidelines it should be mode.
  27                  */
  28                 button-mode {
  29                         label = "MODE";
  30                         linux,code = <BTN_MODE>;
  31                         press-threshold-microvolt = <1750>;
  32                 };
  33         };
  34
  35         gpio_keys_control: gpio-keys-control {
  36                 compatible = "gpio-keys";
  37                 pinctrl-0 = <&btn_pins_ctrl>;
  38                 pinctrl-names = "default";
  39
  40                 button-b {
  41                         gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
  42                         label = "SOUTH";
  43                         linux,code = <BTN_SOUTH>;
  44                 };
  45
  46                 button-down {
  47                         gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
  48                         label = "DPAD-DOWN";
  49                         linux,code = <BTN_DPAD_DOWN>;
  50                 };
  51
  52                 button-l1 {
  53                         gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
  54                         label = "TL";
  55                         linux,code = <BTN_TL>;
  56                 };
  57
  58                 button-l2 {
  59                         gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
  60                         label = "TL2";
  61                         linux,code = <BTN_TL2>;
  62                 };
  63
  64                 button-select {
  65                         gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
  66                         label = "SELECT";
  67                         linux,code = <BTN_SELECT>;
  68                 };
  69
  70                 button-start {
  71                         gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
  72                         label = "START";
  73                         linux,code = <BTN_START>;
  74                 };
  75
  76                 button-up {
  77                         gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
  78                         label = "DPAD-UP";
  79                         linux,code = <BTN_DPAD_UP>;
  80                 };
  81
  82                 button-x {
  83                         gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
  84                         label = "NORTH";
  85                         linux,code = <BTN_NORTH>;
  86                 };
  87         };
  88
  89         gpio_keys_vol: gpio-keys-vol {
  90                 compatible = "gpio-keys";
  91                 autorepeat;
  92                 pinctrl-0 = <&btn_pins_vol>;
  93                 pinctrl-names = "default";
  94
  95                 button-vol-down {
  96                         gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
  97                         label = "VOLUMEDOWN";
  98                         linux,code = <KEY_VOLUMEDOWN>;
  99                 };
 100
 101                 button-vol-up {
 102                         gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
 103                         label = "VOLUMEUP";
 104                         linux,code = <KEY_VOLUMEUP>;
 105                 };
 106         };
 107
 108         hdmi-con {
 109                 compatible = "hdmi-connector";
 110                 ddc-i2c-bus = <&i2c5>;
 111                 type = "c";
 112
 113                 port {
 114                         hdmi_con_in: endpoint {
 115                                 remote-endpoint = <&hdmi_out_con>;
 116                         };
 117                 };
 118         };
 119
 120         leds: pwm-leds {
 121                 compatible = "pwm-leds";
 122
 123                 green_led: led-0 {
 124                         color = <LED_COLOR_ID_GREEN>;
 125                         default-state = "on";
 126                         function = LED_FUNCTION_POWER;
 127                         max-brightness = <255>;
 128                         pwms = <&pwm6 0 25000 0>;
 129                 };
 130
 131                 amber_led: led-1 {
 132                         color = <LED_COLOR_ID_AMBER>;
 133                         function = LED_FUNCTION_CHARGING;
 134                         max-brightness = <255>;
 135                         pwms = <&pwm7 0 25000 0>;
 136                 };
 137
 138                 red_led: led-2 {
 139                         color = <LED_COLOR_ID_RED>;
 140                         default-state = "off";
 141                         function = LED_FUNCTION_STATUS;
 142                         max-brightness = <255>;
 143                         pwms = <&pwm0 0 25000 0>;
 144                 };
 145         };
 146
 147         sdio_pwrseq: sdio-pwrseq {
 148                 compatible = "mmc-pwrseq-simple";
 149                 clocks = <&rk817 1>;
 150                 clock-names = "ext_clock";
 151                 pinctrl-0 = <&wifi_enable_h>;
 152                 pinctrl-names = "default";
 153                 post-power-on-delay-ms = <200>;
 154                 reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
 155         };
 156
 157         vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 {
 158                 compatible = "regulator-fixed";
 159                 gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
 160                 enable-active-high;
 161                 pinctrl-0 = <&vcc_lcd_h>;
 162                 pinctrl-names = "default";
 163                 regulator-boot-on;
 164                 regulator-min-microvolt = <3300000>;
 165                 regulator-max-microvolt = <3300000>;
 166                 regulator-name = "vcc3v3_lcd0_n";
 167                 vin-supply = <&vcc_3v3>;
 168                 regulator-state-mem {
 169                         regulator-off-in-suspend;
 170                 };
 171         };
 172
 173         vcc_sys: regulator-vcc-sys {
 174                 compatible = "regulator-fixed";
 175                 regulator-always-on;
 176                 regulator-boot-on;
 177                 regulator-min-microvolt = <3800000>;
 178                 regulator-max-microvolt = <3800000>;
 179                 regulator-name = "vcc_sys";
 180         };
 181
 182         vcc_wifi: regulator-vcc-wifi {
 183                 compatible = "regulator-fixed";
 184                 enable-active-high;
 185                 gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
 186                 pinctrl-0 = <&vcc_wifi_h>;
 187                 pinctrl-names = "default";
 188                 regulator-always-on;
 189                 regulator-boot-on;
 190                 regulator-min-microvolt = <3300000>;
 191                 regulator-max-microvolt = <3300000>;
 192                 regulator-name = "vcc_wifi";
 193         };
 194
 195         vibrator: pwm-vibrator {
 196                 compatible = "pwm-vibrator";
 197                 pwm-names = "enable";
 198                 pwms = <&pwm5 0 1000000000 0>;
 199         };
 200 };
 201
 202 &combphy1 {
 203         status = "okay";
 204 };
 205
 206 &cpu0 {
 207         cpu-supply = <&vdd_cpu>;
 208 };
 209
 210 &cpu1 {
 211         cpu-supply = <&vdd_cpu>;
 212 };
 213
 214 &cpu2 {
 215         cpu-supply = <&vdd_cpu>;
 216 };
 217
 218 &cpu3 {
 219         cpu-supply = <&vdd_cpu>;
 220 };
 221
 222 &gpu {
 223         mali-supply = <&vdd_gpu>;
 224         status = "okay";
 225 };
 226
 227 &hdmi {
 228         ddc-i2c-bus = <&i2c5>;
 229         pinctrl-0 = <&hdmitxm0_cec>;
 230         pinctrl-names = "default";
 231         status = "okay";
 232 };
 233
 234 &hdmi_in {
 235         hdmi_in_vp0: endpoint {
 236                 remote-endpoint = <&vp0_out_hdmi>;
 237         };
 238 };
 239
 240 &hdmi_out {
 241         hdmi_out_con: endpoint {
 242                 remote-endpoint = <&hdmi_con_in>;
 243         };
 244 };
 245
 246 &hdmi_sound {
 247         status = "okay";
 248 };
 249
 250 &i2c0 {
 251         status = "okay";
 252
 253         rk817: pmic@20 {
 254                 compatible = "rockchip,rk817";
 255                 reg = <0x20>;
 256                 interrupt-parent = <&gpio0>;
 257                 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
 258                 clock-output-names = "rk808-clkout1", "rk808-clkout2";
 259                 clock-names = "mclk";
 260                 clocks = <&cru I2S1_MCLKOUT_TX>;
 261                 assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
 262                 assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
 263                 #clock-cells = <1>;
 264                 #sound-dai-cells = <0>;
 265                 pinctrl-names = "default";
 266                 pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
 267                 wakeup-source;
 268
 269                 vcc1-supply = <&vcc_sys>;
 270                 vcc2-supply = <&vcc_sys>;
 271                 vcc3-supply = <&vcc_sys>;
 272                 vcc4-supply = <&vcc_sys>;
 273                 vcc5-supply = <&vcc_sys>;
 274                 vcc6-supply = <&vcc_sys>;
 275                 vcc7-supply = <&vcc_sys>;
 276                 vcc8-supply = <&vcc_sys>;
 277                 vcc9-supply = <&dcdc_boost>;
 278
 279                 regulators {
 280                         vdd_logic: DCDC_REG1 {
 281                                 regulator-always-on;
 282                                 regulator-boot-on;
 283                                 regulator-min-microvolt = <500000>;
 284                                 regulator-max-microvolt = <1350000>;
 285                                 regulator-ramp-delay = <6001>;
 286                                 regulator-initial-mode = <0x2>;
 287                                 regulator-name = "vdd_logic";
 288                                 regulator-state-mem {
 289                                         regulator-off-in-suspend;
 290                                         regulator-suspend-microvolt = <900000>;
 291                                 };
 292                         };
 293
 294                         vdd_gpu: DCDC_REG2 {
 295                                 regulator-always-on;
 296                                 regulator-boot-on;
 297                                 regulator-min-microvolt = <500000>;
 298                                 regulator-max-microvolt = <1350000>;
 299                                 regulator-ramp-delay = <6001>;
 300                                 regulator-initial-mode = <0x2>;
 301                                 regulator-name = "vdd_gpu";
 302                                 regulator-state-mem {
 303                                         regulator-off-in-suspend;
 304                                 };
 305                         };
 306
 307                         vcc_ddr: DCDC_REG3 {
 308                                 regulator-always-on;
 309                                 regulator-boot-on;
 310                                 regulator-initial-mode = <0x2>;
 311                                 regulator-name = "vcc_ddr";
 312                                 regulator-state-mem {
 313                                         regulator-on-in-suspend;
 314                                 };
 315                         };
 316
 317                         vcc_3v3: DCDC_REG4 {
 318                                 regulator-always-on;
 319                                 regulator-boot-on;
 320                                 regulator-min-microvolt = <3300000>;
 321                                 regulator-max-microvolt = <3300000>;
 322                                 regulator-initial-mode = <0x2>;
 323                                 regulator-name = "vcc_3v3";
 324                                 regulator-state-mem {
 325                                         regulator-on-in-suspend;
 326                                         regulator-suspend-microvolt = <3300000>;
 327                                 };
 328                         };
 329
 330                         vcca1v8_pmu: LDO_REG1 {
 331                                 regulator-always-on;
 332                                 regulator-boot-on;
 333                                 regulator-min-microvolt = <1800000>;
 334                                 regulator-max-microvolt = <1800000>;
 335                                 regulator-name = "vcca1v8_pmu";
 336                                 regulator-state-mem {
 337                                         regulator-on-in-suspend;
 338                                         regulator-suspend-microvolt = <1800000>;
 339                                 };
 340                         };
 341
 342                         vdda_0v9: LDO_REG2 {
 343                                 regulator-always-on;
 344                                 regulator-boot-on;
 345                                 regulator-min-microvolt = <900000>;
 346                                 regulator-max-microvolt = <900000>;
 347                                 regulator-name = "vdda_0v9";
 348                                 regulator-state-mem {
 349                                         regulator-off-in-suspend;
 350                                 };
 351                         };
 352
 353                         vdda0v9_pmu: LDO_REG3 {
 354                                 regulator-always-on;
 355                                 regulator-boot-on;
 356                                 regulator-min-microvolt = <900000>;
 357                                 regulator-max-microvolt = <900000>;
 358                                 regulator-name = "vdda0v9_pmu";
 359                                 regulator-state-mem {
 360                                         regulator-on-in-suspend;
 361                                         regulator-suspend-microvolt = <900000>;
 362                                 };
 363                         };
 364
 365                         vccio_acodec: LDO_REG4 {
 366                                 regulator-always-on;
 367                                 regulator-boot-on;
 368                                 regulator-min-microvolt = <3300000>;
 369                                 regulator-max-microvolt = <3300000>;
 370                                 regulator-name = "vccio_acodec";
 371                                 regulator-state-mem {
 372                                         regulator-off-in-suspend;
 373                                 };
 374                         };
 375
 376                         vccio_sd: LDO_REG5 {
 377                                 regulator-always-on;
 378                                 regulator-boot-on;
 379                                 regulator-min-microvolt = <1800000>;
 380                                 regulator-max-microvolt = <3300000>;
 381                                 regulator-name = "vccio_sd";
 382                                 regulator-state-mem {
 383                                         regulator-off-in-suspend;
 384                                 };
 385                         };
 386
 387                         vcc3v3_pmu: LDO_REG6 {
 388                                 regulator-always-on;
 389                                 regulator-boot-on;
 390                                 regulator-min-microvolt = <3300000>;
 391                                 regulator-max-microvolt = <3300000>;
 392                                 regulator-name = "vcc3v3_pmu";
 393                                 regulator-state-mem {
 394                                         regulator-on-in-suspend;
 395                                         regulator-suspend-microvolt = <3300000>;
 396                                 };
 397                         };
 398
 399                         vcc_1v8: LDO_REG7 {
 400                                 regulator-always-on;
 401                                 regulator-boot-on;
 402                                 regulator-min-microvolt = <1800000>;
 403                                 regulator-max-microvolt = <1800000>;
 404                                 regulator-name = "vcc_1v8";
 405                                 regulator-state-mem {
 406                                         regulator-off-in-suspend;
 407                                 };
 408                         };
 409
 410                         vcc1v8_dvp: LDO_REG8 {
 411                                 regulator-always-on;
 412                                 regulator-boot-on;
 413                                 regulator-min-microvolt = <1800000>;
 414                                 regulator-max-microvolt = <3300000>;
 415                                 regulator-name = "vcc1v8_dvp";
 416                                 regulator-state-mem {
 417                                         regulator-off-in-suspend;
 418                                 };
 419                         };
 420
 421                         vcc2v8_dvp: LDO_REG9 {
 422                                 regulator-always-on;
 423                                 regulator-boot-on;
 424                                 regulator-min-microvolt = <2800000>;
 425                                 regulator-max-microvolt = <2800000>;
 426                                 regulator-name = "vcc2v8_dvp";
 427                                 regulator-state-mem {
 428                                         regulator-off-in-suspend;
 429                                 };
 430                         };
 431
 432                         dcdc_boost: BOOST {
 433                                 regulator-always-on;
 434                                 regulator-boot-on;
 435                                 regulator-min-microvolt = <4700000>;
 436                                 regulator-max-microvolt = <5400000>;
 437                                 regulator-name = "boost";
 438                                 regulator-state-mem {
 439                                         regulator-off-in-suspend;
 440                                 };
 441                         };
 442
 443                         otg_switch: OTG_SWITCH {
 444                                 regulator-name = "otg_switch";
 445                                 regulator-state-mem {
 446                                         regulator-off-in-suspend;
 447                                 };
 448                         };
 449                 };
 450         };
 451
 452         vdd_cpu: regulator@40 {
 453                 compatible = "fcs,fan53555";
 454                 reg = <0x40>;
 455                 fcs,suspend-voltage-selector = <1>;
 456                 regulator-always-on;
 457                 regulator-boot-on;
 458                 regulator-min-microvolt = <712500>;
 459                 regulator-max-microvolt = <1390000>;
 460                 regulator-name = "vdd_cpu";
 461                 regulator-ramp-delay = <2300>;
 462                 vin-supply = <&vcc_sys>;
 463                 regulator-state-mem {
 464                         regulator-off-in-suspend;
 465                 };
 466         };
 467 };
 468
 469 &i2c1 {
 470         /* Unknown/unused device at 0x3c */
 471         status = "disabled";
 472 };
 473
 474 &i2c5 {
 475         pinctrl-0 = <&i2c5m1_xfer>;
 476         pinctrl-names = "default";
 477         status = "okay";
 478 };
 479
 480 &i2s0_8ch {
 481         status = "okay";
 482 };
 483
 484 &i2s1_8ch {
 485         pinctrl-0 = <&i2s1m0_sclktx
 486                      &i2s1m0_lrcktx
 487                      &i2s1m0_sdi0
 488                      &i2s1m0_sdo0>;
 489         pinctrl-names = "default";
 490         rockchip,trcm-sync-tx-only;
 491         status = "okay";
 492 };
 493
 494 &pinctrl {
 495         gpio-btns {
 496                 btn_pins_ctrl: btn-pins-ctrl {
 497                         rockchip,pins =
 498                                 <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
 499                                 <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
 500                                 <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
 501                                 <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
 502                                 <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
 503                                 <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
 504                                 <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
 505                                 <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
 506                                 <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
 507                                 <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
 508                                 <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
 509                                 <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
 510                                 <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>,
 511                                 <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
 512                                 <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>,
 513                                 <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
 514                 };
 515
 516                 btn_pins_vol: btn-pins-vol {
 517                         rockchip,pins =
 518                         <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
 519                         <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
 520                 };
 521         };
 522
 523         joy-mux {
 524                 joy_mux_en: joy-mux-en {
 525                         rockchip,pins =
 526                                 <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
 527                 };
 528         };
 529
 530         pmic {
 531                 pmic_int_l: pmic-int-l {
 532                         rockchip,pins =
 533                                 <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 534                 };
 535         };
 536
 537         sdio-pwrseq {
 538                 wifi_enable_h: wifi-enable-h {
 539                         rockchip,pins =
 540                                 <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 541                 };
 542         };
 543
 544         vcc3v3-lcd {
 545                 vcc_lcd_h: vcc-lcd-h {
 546                         rockchip,pins =
 547                                 <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
 548                 };
 549         };
 550
 551         vcc-wifi {
 552                 vcc_wifi_h: vcc-wifi-h {
 553                         rockchip,pins =
 554                                 <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
 555                 };
 556         };
 557 };
 558
 559 &pmu_io_domains {
 560         status = "okay";
 561         pmuio1-supply = <&vcc3v3_pmu>;
 562         pmuio2-supply = <&vcc3v3_pmu>;
 563         vccio1-supply = <&vccio_acodec>;
 564         vccio3-supply = <&vccio_sd>;
 565         vccio4-supply = <&vcc_1v8>;
 566         vccio5-supply = <&vcc_3v3>;
 567         vccio6-supply = <&vcc1v8_dvp>;
 568         vccio7-supply = <&vcc_3v3>;
 569 };
 570
 571 &pwm0 {
 572         pinctrl-0 = <&pwm0m1_pins>;
 573         pinctrl-names = "default";
 574         status = "okay";
 575 };
 576
 577 &pwm5 {
 578         status = "okay";
 579 };
 580
 581 &pwm6 {
 582         status = "okay";
 583 };
 584
 585 &pwm7 {
 586         status = "okay";
 587 };
 588
 589 &saradc {
 590         vref-supply = <&vcc_1v8>;
 591         status = "okay";
 592 };
 593
 594 &sdmmc0 {
 595         bus-width = <4>;
 596         cap-sd-highspeed;
 597         cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 598         disable-wp;
 599         pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
 600         pinctrl-names = "default";
 601         sd-uhs-sdr104;
 602         vmmc-supply = <&vcc_3v3>;
 603         vqmmc-supply = <&vccio_sd>;
 604         status = "okay";
 605 };
 606
 607 &sdmmc1 {
 608         bus-width = <4>;
 609         cap-sd-highspeed;
 610         cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
 611         disable-wp;
 612         pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>;
 613         pinctrl-names = "default";
 614         sd-uhs-sdr104;
 615         vmmc-supply = <&vcc_3v3>;
 616         vqmmc-supply = <&vcc1v8_dvp>;
 617         status = "okay";
 618 };
 619
 620 &sdmmc2 {
 621         bus-width = <4>;
 622         cap-sd-highspeed;
 623         cap-sdio-irq;
 624         keep-power-in-suspend;
 625         mmc-pwrseq = <&sdio_pwrseq>;
 626         non-removable;
 627         pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
 628         pinctrl-names = "default";
 629         vmmc-supply = <&vcc_wifi>;
 630         vqmmc-supply = <&vcca1v8_pmu>;
 631         status = "okay";
 632 };
 633
 634 &tsadc {
 635         rockchip,hw-tshut-mode = <1>;
 636         rockchip,hw-tshut-polarity = <0>;
 637         status = "okay";
 638 };
 639
 640 &uart1 {
 641         pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
 642         pinctrl-names = "default";
 643         uart-has-rtscts;
 644         status = "okay";
 645
 646         bluetooth {
 647                 compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
 648                 device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
 649                 enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
 650                 host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
 651         };
 652 };
 653
 654 &uart2 {
 655         status = "okay";
 656 };
 657
 658 /*
 659  * Lack the schematics to verify, but port works as a peripheral
 660  * (and not a host or OTG port).
 661  */
 662 &usb_host0_xhci {
 663         dr_mode = "peripheral";
 664         phys = <&usb2phy0_otg>;
 665         phy-names = "usb2-phy";
 666         status = "okay";
 667 };
 668
 669 &usb_host1_ehci {
 670         status = "okay";
 671 };
 672
 673 &usb_host1_ohci {
 674         status = "okay";
 675 };
 676
 677 &usb_host1_xhci {
 678         phy-names = "usb2-phy", "usb3-phy";
 679         phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>;
 680         status = "okay";
 681 };
 682
 683 &usb2phy0 {
 684         status = "okay";
 685 };
 686
 687 &usb2phy0_otg {
 688         status = "okay";
 689 };
 690
 691 &usb2phy1 {
 692         status = "okay";
 693 };
 694
 695 &usb2phy1_host {
 696         status = "okay";
 697 };
 698
 699 &vop {
 700         assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
 701         assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
 702         status = "okay";
 703 };
 704
 705 &vop_mmu {
 706         status = "okay";
 707 };
 708
 709 &vp0 {
 710         vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
 711                 reg = <ROCKCHIP_VOP2_EP_HDMI0>;
 712                 remote-endpoint = <&hdmi_in_vp0>;
 713         };
 714 };