Merge tag 'drm-next-2024-03-22' of https://gitlab.freedesktop.org/drm/kernel
[sfrench/cifs-2.6.git] / drivers / gpu / drm / bridge / lontium-lt9611uxc.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (c) 2018, The Linux Foundation. All rights reserved.
4  * Copyright (c) 2019-2020. Linaro Limited.
5  */
6
7 #include <linux/firmware.h>
8 #include <linux/gpio/consumer.h>
9 #include <linux/i2c.h>
10 #include <linux/interrupt.h>
11 #include <linux/module.h>
12 #include <linux/mutex.h>
13 #include <linux/of_graph.h>
14 #include <linux/platform_device.h>
15 #include <linux/regmap.h>
16 #include <linux/regulator/consumer.h>
17 #include <linux/wait.h>
18 #include <linux/workqueue.h>
19
20 #include <sound/hdmi-codec.h>
21
22 #include <drm/drm_atomic_helper.h>
23 #include <drm/drm_bridge.h>
24 #include <drm/drm_edid.h>
25 #include <drm/drm_mipi_dsi.h>
26 #include <drm/drm_print.h>
27 #include <drm/drm_probe_helper.h>
28
29 #define EDID_BLOCK_SIZE 128
30 #define EDID_NUM_BLOCKS 2
31
32 #define FW_FILE "lt9611uxc_fw.bin"
33
34 struct lt9611uxc {
35         struct device *dev;
36         struct drm_bridge bridge;
37         struct drm_connector connector;
38
39         struct regmap *regmap;
40         /* Protects all accesses to registers by stopping the on-chip MCU */
41         struct mutex ocm_lock;
42
43         struct wait_queue_head wq;
44         struct work_struct work;
45
46         struct device_node *dsi0_node;
47         struct device_node *dsi1_node;
48         struct mipi_dsi_device *dsi0;
49         struct mipi_dsi_device *dsi1;
50         struct platform_device *audio_pdev;
51
52         struct gpio_desc *reset_gpio;
53         struct gpio_desc *enable_gpio;
54
55         struct regulator_bulk_data supplies[2];
56
57         struct i2c_client *client;
58
59         bool hpd_supported;
60         bool edid_read;
61         /* can be accessed from different threads, so protect this with ocm_lock */
62         bool hdmi_connected;
63         uint8_t fw_version;
64 };
65
66 #define LT9611_PAGE_CONTROL     0xff
67
68 static const struct regmap_range_cfg lt9611uxc_ranges[] = {
69         {
70                 .name = "register_range",
71                 .range_min =  0,
72                 .range_max = 0xd0ff,
73                 .selector_reg = LT9611_PAGE_CONTROL,
74                 .selector_mask = 0xff,
75                 .selector_shift = 0,
76                 .window_start = 0,
77                 .window_len = 0x100,
78         },
79 };
80
81 static const struct regmap_config lt9611uxc_regmap_config = {
82         .reg_bits = 8,
83         .val_bits = 8,
84         .max_register = 0xffff,
85         .ranges = lt9611uxc_ranges,
86         .num_ranges = ARRAY_SIZE(lt9611uxc_ranges),
87 };
88
89 struct lt9611uxc_mode {
90         u16 hdisplay;
91         u16 vdisplay;
92         u8 vrefresh;
93 };
94
95 /*
96  * This chip supports only a fixed set of modes.
97  * Enumerate them here to check whether the mode is supported.
98  */
99 static struct lt9611uxc_mode lt9611uxc_modes[] = {
100         { 1920, 1080, 60 },
101         { 1920, 1080, 30 },
102         { 1920, 1080, 25 },
103         { 1366, 768, 60 },
104         { 1360, 768, 60 },
105         { 1280, 1024, 60 },
106         { 1280, 800, 60 },
107         { 1280, 720, 60 },
108         { 1280, 720, 50 },
109         { 1280, 720, 30 },
110         { 1152, 864, 60 },
111         { 1024, 768, 60 },
112         { 800, 600, 60 },
113         { 720, 576, 50 },
114         { 720, 480, 60 },
115         { 640, 480, 60 },
116 };
117
118 static struct lt9611uxc *bridge_to_lt9611uxc(struct drm_bridge *bridge)
119 {
120         return container_of(bridge, struct lt9611uxc, bridge);
121 }
122
123 static struct lt9611uxc *connector_to_lt9611uxc(struct drm_connector *connector)
124 {
125         return container_of(connector, struct lt9611uxc, connector);
126 }
127
128 static void lt9611uxc_lock(struct lt9611uxc *lt9611uxc)
129 {
130         mutex_lock(&lt9611uxc->ocm_lock);
131         regmap_write(lt9611uxc->regmap, 0x80ee, 0x01);
132 }
133
134 static void lt9611uxc_unlock(struct lt9611uxc *lt9611uxc)
135 {
136         regmap_write(lt9611uxc->regmap, 0x80ee, 0x00);
137         msleep(50);
138         mutex_unlock(&lt9611uxc->ocm_lock);
139 }
140
141 static irqreturn_t lt9611uxc_irq_thread_handler(int irq, void *dev_id)
142 {
143         struct lt9611uxc *lt9611uxc = dev_id;
144         unsigned int irq_status = 0;
145         unsigned int hpd_status = 0;
146
147         lt9611uxc_lock(lt9611uxc);
148
149         regmap_read(lt9611uxc->regmap, 0xb022, &irq_status);
150         regmap_read(lt9611uxc->regmap, 0xb023, &hpd_status);
151         if (irq_status)
152                 regmap_write(lt9611uxc->regmap, 0xb022, 0);
153
154         if (irq_status & BIT(0)) {
155                 lt9611uxc->edid_read = !!(hpd_status & BIT(0));
156                 wake_up_all(&lt9611uxc->wq);
157         }
158
159         if (irq_status & BIT(1)) {
160                 lt9611uxc->hdmi_connected = hpd_status & BIT(1);
161                 schedule_work(&lt9611uxc->work);
162         }
163
164         lt9611uxc_unlock(lt9611uxc);
165
166         return IRQ_HANDLED;
167 }
168
169 static void lt9611uxc_hpd_work(struct work_struct *work)
170 {
171         struct lt9611uxc *lt9611uxc = container_of(work, struct lt9611uxc, work);
172         bool connected;
173
174         if (lt9611uxc->connector.dev) {
175                 if (lt9611uxc->connector.dev->mode_config.funcs)
176                         drm_kms_helper_hotplug_event(lt9611uxc->connector.dev);
177         } else {
178
179                 mutex_lock(&lt9611uxc->ocm_lock);
180                 connected = lt9611uxc->hdmi_connected;
181                 mutex_unlock(&lt9611uxc->ocm_lock);
182
183                 drm_bridge_hpd_notify(&lt9611uxc->bridge,
184                                       connected ?
185                                       connector_status_connected :
186                                       connector_status_disconnected);
187         }
188 }
189
190 static void lt9611uxc_reset(struct lt9611uxc *lt9611uxc)
191 {
192         gpiod_set_value_cansleep(lt9611uxc->reset_gpio, 1);
193         msleep(20);
194
195         gpiod_set_value_cansleep(lt9611uxc->reset_gpio, 0);
196         msleep(20);
197
198         gpiod_set_value_cansleep(lt9611uxc->reset_gpio, 1);
199         msleep(300);
200 }
201
202 static void lt9611uxc_assert_5v(struct lt9611uxc *lt9611uxc)
203 {
204         if (!lt9611uxc->enable_gpio)
205                 return;
206
207         gpiod_set_value_cansleep(lt9611uxc->enable_gpio, 1);
208         msleep(20);
209 }
210
211 static int lt9611uxc_regulator_init(struct lt9611uxc *lt9611uxc)
212 {
213         int ret;
214
215         lt9611uxc->supplies[0].supply = "vdd";
216         lt9611uxc->supplies[1].supply = "vcc";
217
218         ret = devm_regulator_bulk_get(lt9611uxc->dev, 2, lt9611uxc->supplies);
219         if (ret < 0)
220                 return ret;
221
222         return regulator_set_load(lt9611uxc->supplies[0].consumer, 200000);
223 }
224
225 static int lt9611uxc_regulator_enable(struct lt9611uxc *lt9611uxc)
226 {
227         int ret;
228
229         ret = regulator_enable(lt9611uxc->supplies[0].consumer);
230         if (ret < 0)
231                 return ret;
232
233         usleep_range(1000, 10000); /* 50000 according to dtsi */
234
235         ret = regulator_enable(lt9611uxc->supplies[1].consumer);
236         if (ret < 0) {
237                 regulator_disable(lt9611uxc->supplies[0].consumer);
238                 return ret;
239         }
240
241         return 0;
242 }
243
244 static struct lt9611uxc_mode *lt9611uxc_find_mode(const struct drm_display_mode *mode)
245 {
246         int i;
247
248         for (i = 0; i < ARRAY_SIZE(lt9611uxc_modes); i++) {
249                 if (lt9611uxc_modes[i].hdisplay == mode->hdisplay &&
250                     lt9611uxc_modes[i].vdisplay == mode->vdisplay &&
251                     lt9611uxc_modes[i].vrefresh == drm_mode_vrefresh(mode)) {
252                         return &lt9611uxc_modes[i];
253                 }
254         }
255
256         return NULL;
257 }
258
259 static struct mipi_dsi_device *lt9611uxc_attach_dsi(struct lt9611uxc *lt9611uxc,
260                                                     struct device_node *dsi_node)
261 {
262         const struct mipi_dsi_device_info info = { "lt9611uxc", 0, NULL };
263         struct mipi_dsi_device *dsi;
264         struct mipi_dsi_host *host;
265         struct device *dev = lt9611uxc->dev;
266         int ret;
267
268         host = of_find_mipi_dsi_host_by_node(dsi_node);
269         if (!host) {
270                 dev_err(dev, "failed to find dsi host\n");
271                 return ERR_PTR(-EPROBE_DEFER);
272         }
273
274         dsi = devm_mipi_dsi_device_register_full(dev, host, &info);
275         if (IS_ERR(dsi)) {
276                 dev_err(dev, "failed to create dsi device\n");
277                 return dsi;
278         }
279
280         dsi->lanes = 4;
281         dsi->format = MIPI_DSI_FMT_RGB888;
282         dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
283                           MIPI_DSI_MODE_VIDEO_HSE;
284
285         ret = devm_mipi_dsi_attach(dev, dsi);
286         if (ret < 0) {
287                 dev_err(dev, "failed to attach dsi to host\n");
288                 return ERR_PTR(ret);
289         }
290
291         return dsi;
292 }
293
294 static int lt9611uxc_connector_get_modes(struct drm_connector *connector)
295 {
296         struct lt9611uxc *lt9611uxc = connector_to_lt9611uxc(connector);
297         const struct drm_edid *drm_edid;
298         int count;
299
300         drm_edid = drm_bridge_edid_read(&lt9611uxc->bridge, connector);
301         drm_edid_connector_update(connector, drm_edid);
302         count = drm_edid_connector_add_modes(connector);
303         drm_edid_free(drm_edid);
304
305         return count;
306 }
307
308 static enum drm_connector_status lt9611uxc_connector_detect(struct drm_connector *connector,
309                                                             bool force)
310 {
311         struct lt9611uxc *lt9611uxc = connector_to_lt9611uxc(connector);
312
313         return lt9611uxc->bridge.funcs->detect(&lt9611uxc->bridge);
314 }
315
316 static enum drm_mode_status lt9611uxc_connector_mode_valid(struct drm_connector *connector,
317                                                            struct drm_display_mode *mode)
318 {
319         struct lt9611uxc_mode *lt9611uxc_mode = lt9611uxc_find_mode(mode);
320
321         return lt9611uxc_mode ? MODE_OK : MODE_BAD;
322 }
323
324 static const struct drm_connector_helper_funcs lt9611uxc_bridge_connector_helper_funcs = {
325         .get_modes = lt9611uxc_connector_get_modes,
326         .mode_valid = lt9611uxc_connector_mode_valid,
327 };
328
329 static const struct drm_connector_funcs lt9611uxc_bridge_connector_funcs = {
330         .fill_modes = drm_helper_probe_single_connector_modes,
331         .detect = lt9611uxc_connector_detect,
332         .destroy = drm_connector_cleanup,
333         .reset = drm_atomic_helper_connector_reset,
334         .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
335         .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
336 };
337
338 static int lt9611uxc_connector_init(struct drm_bridge *bridge, struct lt9611uxc *lt9611uxc)
339 {
340         int ret;
341
342         if (!bridge->encoder) {
343                 DRM_ERROR("Parent encoder object not found");
344                 return -ENODEV;
345         }
346
347         lt9611uxc->connector.polled = DRM_CONNECTOR_POLL_HPD;
348
349         drm_connector_helper_add(&lt9611uxc->connector,
350                                  &lt9611uxc_bridge_connector_helper_funcs);
351         ret = drm_connector_init(bridge->dev, &lt9611uxc->connector,
352                                  &lt9611uxc_bridge_connector_funcs,
353                                  DRM_MODE_CONNECTOR_HDMIA);
354         if (ret) {
355                 DRM_ERROR("Failed to initialize connector with drm\n");
356                 return ret;
357         }
358
359         return drm_connector_attach_encoder(&lt9611uxc->connector, bridge->encoder);
360 }
361
362 static int lt9611uxc_bridge_attach(struct drm_bridge *bridge,
363                                    enum drm_bridge_attach_flags flags)
364 {
365         struct lt9611uxc *lt9611uxc = bridge_to_lt9611uxc(bridge);
366         int ret;
367
368         if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) {
369                 ret = lt9611uxc_connector_init(bridge, lt9611uxc);
370                 if (ret < 0)
371                         return ret;
372         }
373
374         return 0;
375 }
376
377 static enum drm_mode_status
378 lt9611uxc_bridge_mode_valid(struct drm_bridge *bridge,
379                             const struct drm_display_info *info,
380                             const struct drm_display_mode *mode)
381 {
382         struct lt9611uxc_mode *lt9611uxc_mode;
383
384         lt9611uxc_mode = lt9611uxc_find_mode(mode);
385
386         return lt9611uxc_mode ? MODE_OK : MODE_BAD;
387 }
388
389 static void lt9611uxc_video_setup(struct lt9611uxc *lt9611uxc,
390                                   const struct drm_display_mode *mode)
391 {
392         u32 h_total, hactive, hsync_len, hfront_porch;
393         u32 v_total, vactive, vsync_len, vfront_porch;
394
395         h_total = mode->htotal;
396         v_total = mode->vtotal;
397
398         hactive = mode->hdisplay;
399         hsync_len = mode->hsync_end - mode->hsync_start;
400         hfront_porch = mode->hsync_start - mode->hdisplay;
401
402         vactive = mode->vdisplay;
403         vsync_len = mode->vsync_end - mode->vsync_start;
404         vfront_porch = mode->vsync_start - mode->vdisplay;
405
406         regmap_write(lt9611uxc->regmap, 0xd00d, (u8)(v_total / 256));
407         regmap_write(lt9611uxc->regmap, 0xd00e, (u8)(v_total % 256));
408
409         regmap_write(lt9611uxc->regmap, 0xd00f, (u8)(vactive / 256));
410         regmap_write(lt9611uxc->regmap, 0xd010, (u8)(vactive % 256));
411
412         regmap_write(lt9611uxc->regmap, 0xd011, (u8)(h_total / 256));
413         regmap_write(lt9611uxc->regmap, 0xd012, (u8)(h_total % 256));
414
415         regmap_write(lt9611uxc->regmap, 0xd013, (u8)(hactive / 256));
416         regmap_write(lt9611uxc->regmap, 0xd014, (u8)(hactive % 256));
417
418         regmap_write(lt9611uxc->regmap, 0xd015, (u8)(vsync_len % 256));
419
420         regmap_update_bits(lt9611uxc->regmap, 0xd016, 0xf, (u8)(hsync_len / 256));
421         regmap_write(lt9611uxc->regmap, 0xd017, (u8)(hsync_len % 256));
422
423         regmap_update_bits(lt9611uxc->regmap, 0xd018, 0xf, (u8)(vfront_porch / 256));
424         regmap_write(lt9611uxc->regmap, 0xd019, (u8)(vfront_porch % 256));
425
426         regmap_update_bits(lt9611uxc->regmap, 0xd01a, 0xf, (u8)(hfront_porch / 256));
427         regmap_write(lt9611uxc->regmap, 0xd01b, (u8)(hfront_porch % 256));
428 }
429
430 static void lt9611uxc_bridge_mode_set(struct drm_bridge *bridge,
431                                       const struct drm_display_mode *mode,
432                                       const struct drm_display_mode *adj_mode)
433 {
434         struct lt9611uxc *lt9611uxc = bridge_to_lt9611uxc(bridge);
435
436         lt9611uxc_lock(lt9611uxc);
437         lt9611uxc_video_setup(lt9611uxc, mode);
438         lt9611uxc_unlock(lt9611uxc);
439 }
440
441 static enum drm_connector_status lt9611uxc_bridge_detect(struct drm_bridge *bridge)
442 {
443         struct lt9611uxc *lt9611uxc = bridge_to_lt9611uxc(bridge);
444         unsigned int reg_val = 0;
445         int ret;
446         bool connected = true;
447
448         lt9611uxc_lock(lt9611uxc);
449
450         if (lt9611uxc->hpd_supported) {
451                 ret = regmap_read(lt9611uxc->regmap, 0xb023, &reg_val);
452
453                 if (ret)
454                         dev_err(lt9611uxc->dev, "failed to read hpd status: %d\n", ret);
455                 else
456                         connected  = reg_val & BIT(1);
457         }
458         lt9611uxc->hdmi_connected = connected;
459
460         lt9611uxc_unlock(lt9611uxc);
461
462         return connected ?  connector_status_connected :
463                                 connector_status_disconnected;
464 }
465
466 static int lt9611uxc_wait_for_edid(struct lt9611uxc *lt9611uxc)
467 {
468         return wait_event_interruptible_timeout(lt9611uxc->wq, lt9611uxc->edid_read,
469                         msecs_to_jiffies(500));
470 }
471
472 static int lt9611uxc_get_edid_block(void *data, u8 *buf, unsigned int block, size_t len)
473 {
474         struct lt9611uxc *lt9611uxc = data;
475         int ret;
476
477         if (len > EDID_BLOCK_SIZE)
478                 return -EINVAL;
479
480         if (block >= EDID_NUM_BLOCKS)
481                 return -EINVAL;
482
483         lt9611uxc_lock(lt9611uxc);
484
485         regmap_write(lt9611uxc->regmap, 0xb00b, 0x10);
486
487         regmap_write(lt9611uxc->regmap, 0xb00a, block * EDID_BLOCK_SIZE);
488
489         ret = regmap_noinc_read(lt9611uxc->regmap, 0xb0b0, buf, len);
490         if (ret)
491                 dev_err(lt9611uxc->dev, "edid read failed: %d\n", ret);
492
493         lt9611uxc_unlock(lt9611uxc);
494
495         return 0;
496 };
497
498 static const struct drm_edid *lt9611uxc_bridge_edid_read(struct drm_bridge *bridge,
499                                                          struct drm_connector *connector)
500 {
501         struct lt9611uxc *lt9611uxc = bridge_to_lt9611uxc(bridge);
502         int ret;
503
504         ret = lt9611uxc_wait_for_edid(lt9611uxc);
505         if (ret < 0) {
506                 dev_err(lt9611uxc->dev, "wait for EDID failed: %d\n", ret);
507                 return NULL;
508         } else if (ret == 0) {
509                 dev_err(lt9611uxc->dev, "wait for EDID timeout\n");
510                 return NULL;
511         }
512
513         return drm_edid_read_custom(connector, lt9611uxc_get_edid_block, lt9611uxc);
514 }
515
516 static const struct drm_bridge_funcs lt9611uxc_bridge_funcs = {
517         .attach = lt9611uxc_bridge_attach,
518         .mode_valid = lt9611uxc_bridge_mode_valid,
519         .mode_set = lt9611uxc_bridge_mode_set,
520         .detect = lt9611uxc_bridge_detect,
521         .edid_read = lt9611uxc_bridge_edid_read,
522 };
523
524 static int lt9611uxc_parse_dt(struct device *dev,
525                               struct lt9611uxc *lt9611uxc)
526 {
527         lt9611uxc->dsi0_node = of_graph_get_remote_node(dev->of_node, 0, -1);
528         if (!lt9611uxc->dsi0_node) {
529                 dev_err(lt9611uxc->dev, "failed to get remote node for primary dsi\n");
530                 return -ENODEV;
531         }
532
533         lt9611uxc->dsi1_node = of_graph_get_remote_node(dev->of_node, 1, -1);
534
535         return 0;
536 }
537
538 static int lt9611uxc_gpio_init(struct lt9611uxc *lt9611uxc)
539 {
540         struct device *dev = lt9611uxc->dev;
541
542         lt9611uxc->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
543         if (IS_ERR(lt9611uxc->reset_gpio)) {
544                 dev_err(dev, "failed to acquire reset gpio\n");
545                 return PTR_ERR(lt9611uxc->reset_gpio);
546         }
547
548         lt9611uxc->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
549         if (IS_ERR(lt9611uxc->enable_gpio)) {
550                 dev_err(dev, "failed to acquire enable gpio\n");
551                 return PTR_ERR(lt9611uxc->enable_gpio);
552         }
553
554         return 0;
555 }
556
557 static int lt9611uxc_read_device_rev(struct lt9611uxc *lt9611uxc)
558 {
559         unsigned int rev0, rev1, rev2;
560         int ret;
561
562         lt9611uxc_lock(lt9611uxc);
563
564         ret = regmap_read(lt9611uxc->regmap, 0x8100, &rev0);
565         ret |= regmap_read(lt9611uxc->regmap, 0x8101, &rev1);
566         ret |= regmap_read(lt9611uxc->regmap, 0x8102, &rev2);
567         if (ret)
568                 dev_err(lt9611uxc->dev, "failed to read revision: %d\n", ret);
569         else
570                 dev_info(lt9611uxc->dev, "LT9611 revision: 0x%02x.%02x.%02x\n", rev0, rev1, rev2);
571
572         lt9611uxc_unlock(lt9611uxc);
573
574         return ret;
575 }
576
577 static int lt9611uxc_read_version(struct lt9611uxc *lt9611uxc)
578 {
579         unsigned int rev;
580         int ret;
581
582         lt9611uxc_lock(lt9611uxc);
583
584         ret = regmap_read(lt9611uxc->regmap, 0xb021, &rev);
585         if (ret)
586                 dev_err(lt9611uxc->dev, "failed to read revision: %d\n", ret);
587         else
588                 dev_info(lt9611uxc->dev, "LT9611 version: 0x%02x\n", rev);
589
590         lt9611uxc_unlock(lt9611uxc);
591
592         return ret < 0 ? ret : rev;
593 }
594
595 static int lt9611uxc_hdmi_hw_params(struct device *dev, void *data,
596                                     struct hdmi_codec_daifmt *fmt,
597                                     struct hdmi_codec_params *hparms)
598 {
599         /*
600          * LT9611UXC will automatically detect rate and sample size, so no need
601          * to setup anything here.
602          */
603         return 0;
604 }
605
606 static void lt9611uxc_audio_shutdown(struct device *dev, void *data)
607 {
608 }
609
610 static int lt9611uxc_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
611                                          struct device_node *endpoint)
612 {
613         struct of_endpoint of_ep;
614         int ret;
615
616         ret = of_graph_parse_endpoint(endpoint, &of_ep);
617         if (ret < 0)
618                 return ret;
619
620         /*
621          * HDMI sound should be located as reg = <2>
622          * Then, it is sound port 0
623          */
624         if (of_ep.port == 2)
625                 return 0;
626
627         return -EINVAL;
628 }
629
630 static const struct hdmi_codec_ops lt9611uxc_codec_ops = {
631         .hw_params      = lt9611uxc_hdmi_hw_params,
632         .audio_shutdown = lt9611uxc_audio_shutdown,
633         .get_dai_id     = lt9611uxc_hdmi_i2s_get_dai_id,
634 };
635
636 static int lt9611uxc_audio_init(struct device *dev, struct lt9611uxc *lt9611uxc)
637 {
638         struct hdmi_codec_pdata codec_data = {
639                 .ops = &lt9611uxc_codec_ops,
640                 .max_i2s_channels = 2,
641                 .i2s = 1,
642                 .data = lt9611uxc,
643         };
644
645         lt9611uxc->audio_pdev =
646                 platform_device_register_data(dev, HDMI_CODEC_DRV_NAME,
647                                               PLATFORM_DEVID_AUTO,
648                                               &codec_data, sizeof(codec_data));
649
650         return PTR_ERR_OR_ZERO(lt9611uxc->audio_pdev);
651 }
652
653 static void lt9611uxc_audio_exit(struct lt9611uxc *lt9611uxc)
654 {
655         if (lt9611uxc->audio_pdev) {
656                 platform_device_unregister(lt9611uxc->audio_pdev);
657                 lt9611uxc->audio_pdev = NULL;
658         }
659 }
660
661 #define LT9611UXC_FW_PAGE_SIZE 32
662 static void lt9611uxc_firmware_write_page(struct lt9611uxc *lt9611uxc, u16 addr, const u8 *buf)
663 {
664         struct reg_sequence seq_write_prepare[] = {
665                 REG_SEQ0(0x805a, 0x04),
666                 REG_SEQ0(0x805a, 0x00),
667
668                 REG_SEQ0(0x805e, 0xdf),
669                 REG_SEQ0(0x805a, 0x20),
670                 REG_SEQ0(0x805a, 0x00),
671                 REG_SEQ0(0x8058, 0x21),
672         };
673
674         struct reg_sequence seq_write_addr[] = {
675                 REG_SEQ0(0x805b, (addr >> 16) & 0xff),
676                 REG_SEQ0(0x805c, (addr >> 8) & 0xff),
677                 REG_SEQ0(0x805d, addr & 0xff),
678                 REG_SEQ0(0x805a, 0x10),
679                 REG_SEQ0(0x805a, 0x00),
680         };
681
682         regmap_write(lt9611uxc->regmap, 0x8108, 0xbf);
683         msleep(20);
684         regmap_write(lt9611uxc->regmap, 0x8108, 0xff);
685         msleep(20);
686         regmap_multi_reg_write(lt9611uxc->regmap, seq_write_prepare, ARRAY_SIZE(seq_write_prepare));
687         regmap_noinc_write(lt9611uxc->regmap, 0x8059, buf, LT9611UXC_FW_PAGE_SIZE);
688         regmap_multi_reg_write(lt9611uxc->regmap, seq_write_addr, ARRAY_SIZE(seq_write_addr));
689         msleep(20);
690 }
691
692 static void lt9611uxc_firmware_read_page(struct lt9611uxc *lt9611uxc, u16 addr, char *buf)
693 {
694         struct reg_sequence seq_read_page[] = {
695                 REG_SEQ0(0x805a, 0xa0),
696                 REG_SEQ0(0x805a, 0x80),
697                 REG_SEQ0(0x805b, (addr >> 16) & 0xff),
698                 REG_SEQ0(0x805c, (addr >> 8) & 0xff),
699                 REG_SEQ0(0x805d, addr & 0xff),
700                 REG_SEQ0(0x805a, 0x90),
701                 REG_SEQ0(0x805a, 0x80),
702                 REG_SEQ0(0x8058, 0x21),
703         };
704
705         regmap_multi_reg_write(lt9611uxc->regmap, seq_read_page, ARRAY_SIZE(seq_read_page));
706         regmap_noinc_read(lt9611uxc->regmap, 0x805f, buf, LT9611UXC_FW_PAGE_SIZE);
707 }
708
709 static char *lt9611uxc_firmware_read(struct lt9611uxc *lt9611uxc, size_t size)
710 {
711         struct reg_sequence seq_read_setup[] = {
712                 REG_SEQ0(0x805a, 0x84),
713                 REG_SEQ0(0x805a, 0x80),
714         };
715
716         char *readbuf;
717         u16 offset;
718
719         readbuf = kzalloc(ALIGN(size, 32), GFP_KERNEL);
720         if (!readbuf)
721                 return NULL;
722
723         regmap_multi_reg_write(lt9611uxc->regmap, seq_read_setup, ARRAY_SIZE(seq_read_setup));
724
725         for (offset = 0;
726              offset < size;
727              offset += LT9611UXC_FW_PAGE_SIZE)
728                 lt9611uxc_firmware_read_page(lt9611uxc, offset, &readbuf[offset]);
729
730         return readbuf;
731 }
732
733 static int lt9611uxc_firmware_update(struct lt9611uxc *lt9611uxc)
734 {
735         int ret;
736         u16 offset;
737         size_t remain;
738         char *readbuf;
739         const struct firmware *fw;
740
741         struct reg_sequence seq_setup[] = {
742                 REG_SEQ0(0x805e, 0xdf),
743                 REG_SEQ0(0x8058, 0x00),
744                 REG_SEQ0(0x8059, 0x50),
745                 REG_SEQ0(0x805a, 0x10),
746                 REG_SEQ0(0x805a, 0x00),
747         };
748
749
750         struct reg_sequence seq_block_erase[] = {
751                 REG_SEQ0(0x805a, 0x04),
752                 REG_SEQ0(0x805a, 0x00),
753                 REG_SEQ0(0x805b, 0x00),
754                 REG_SEQ0(0x805c, 0x00),
755                 REG_SEQ0(0x805d, 0x00),
756                 REG_SEQ0(0x805a, 0x01),
757                 REG_SEQ0(0x805a, 0x00),
758         };
759
760         ret = request_firmware(&fw, FW_FILE, lt9611uxc->dev);
761         if (ret < 0)
762                 return ret;
763
764         dev_info(lt9611uxc->dev, "Updating firmware\n");
765         lt9611uxc_lock(lt9611uxc);
766
767         regmap_multi_reg_write(lt9611uxc->regmap, seq_setup, ARRAY_SIZE(seq_setup));
768
769         /*
770          * Need erase block 2 timess here. Sometimes, block erase can fail.
771          * This is a workaroud.
772          */
773         regmap_multi_reg_write(lt9611uxc->regmap, seq_block_erase, ARRAY_SIZE(seq_block_erase));
774         msleep(3000);
775         regmap_multi_reg_write(lt9611uxc->regmap, seq_block_erase, ARRAY_SIZE(seq_block_erase));
776         msleep(3000);
777
778         for (offset = 0, remain = fw->size;
779              remain >= LT9611UXC_FW_PAGE_SIZE;
780              offset += LT9611UXC_FW_PAGE_SIZE, remain -= LT9611UXC_FW_PAGE_SIZE)
781                 lt9611uxc_firmware_write_page(lt9611uxc, offset, fw->data + offset);
782
783         if (remain > 0) {
784                 char buf[LT9611UXC_FW_PAGE_SIZE];
785
786                 memset(buf, 0xff, LT9611UXC_FW_PAGE_SIZE);
787                 memcpy(buf, fw->data + offset, remain);
788                 lt9611uxc_firmware_write_page(lt9611uxc, offset, buf);
789         }
790         msleep(20);
791
792         readbuf = lt9611uxc_firmware_read(lt9611uxc, fw->size);
793         if (!readbuf) {
794                 ret = -ENOMEM;
795                 goto out;
796         }
797
798         if (!memcmp(readbuf, fw->data, fw->size)) {
799                 dev_err(lt9611uxc->dev, "Firmware update failed\n");
800                 print_hex_dump(KERN_ERR, "fw: ", DUMP_PREFIX_OFFSET, 16, 1, readbuf, fw->size, false);
801                 ret = -EINVAL;
802         } else {
803                 dev_info(lt9611uxc->dev, "Firmware updates successfully\n");
804                 ret = 0;
805         }
806         kfree(readbuf);
807
808 out:
809         lt9611uxc_unlock(lt9611uxc);
810         lt9611uxc_reset(lt9611uxc);
811         release_firmware(fw);
812
813         return ret;
814 }
815
816 static ssize_t lt9611uxc_firmware_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t len)
817 {
818         struct lt9611uxc *lt9611uxc = dev_get_drvdata(dev);
819         int ret;
820
821         ret = lt9611uxc_firmware_update(lt9611uxc);
822         if (ret < 0)
823                 return ret;
824         return len;
825 }
826
827 static ssize_t lt9611uxc_firmware_show(struct device *dev, struct device_attribute *attr, char *buf)
828 {
829         struct lt9611uxc *lt9611uxc = dev_get_drvdata(dev);
830
831         return sysfs_emit(buf, "%02x\n", lt9611uxc->fw_version);
832 }
833
834 static DEVICE_ATTR_RW(lt9611uxc_firmware);
835
836 static struct attribute *lt9611uxc_attrs[] = {
837         &dev_attr_lt9611uxc_firmware.attr,
838         NULL,
839 };
840
841 static const struct attribute_group lt9611uxc_attr_group = {
842         .attrs = lt9611uxc_attrs,
843 };
844
845 static const struct attribute_group *lt9611uxc_attr_groups[] = {
846         &lt9611uxc_attr_group,
847         NULL,
848 };
849
850 static int lt9611uxc_probe(struct i2c_client *client)
851 {
852         struct lt9611uxc *lt9611uxc;
853         struct device *dev = &client->dev;
854         int ret;
855         bool fw_updated = false;
856
857         if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
858                 dev_err(dev, "device doesn't support I2C\n");
859                 return -ENODEV;
860         }
861
862         lt9611uxc = devm_kzalloc(dev, sizeof(*lt9611uxc), GFP_KERNEL);
863         if (!lt9611uxc)
864                 return -ENOMEM;
865
866         lt9611uxc->dev = dev;
867         lt9611uxc->client = client;
868         mutex_init(&lt9611uxc->ocm_lock);
869
870         lt9611uxc->regmap = devm_regmap_init_i2c(client, &lt9611uxc_regmap_config);
871         if (IS_ERR(lt9611uxc->regmap)) {
872                 dev_err(lt9611uxc->dev, "regmap i2c init failed\n");
873                 return PTR_ERR(lt9611uxc->regmap);
874         }
875
876         ret = lt9611uxc_parse_dt(dev, lt9611uxc);
877         if (ret) {
878                 dev_err(dev, "failed to parse device tree\n");
879                 return ret;
880         }
881
882         ret = lt9611uxc_gpio_init(lt9611uxc);
883         if (ret < 0)
884                 goto err_of_put;
885
886         ret = lt9611uxc_regulator_init(lt9611uxc);
887         if (ret < 0)
888                 goto err_of_put;
889
890         lt9611uxc_assert_5v(lt9611uxc);
891
892         ret = lt9611uxc_regulator_enable(lt9611uxc);
893         if (ret)
894                 goto err_of_put;
895
896         lt9611uxc_reset(lt9611uxc);
897
898         ret = lt9611uxc_read_device_rev(lt9611uxc);
899         if (ret) {
900                 dev_err(dev, "failed to read chip rev\n");
901                 goto err_disable_regulators;
902         }
903
904 retry:
905         ret = lt9611uxc_read_version(lt9611uxc);
906         if (ret < 0) {
907                 dev_err(dev, "failed to read FW version\n");
908                 goto err_disable_regulators;
909         } else if (ret == 0) {
910                 if (!fw_updated) {
911                         fw_updated = true;
912                         dev_err(dev, "FW version 0, enforcing firmware update\n");
913                         ret = lt9611uxc_firmware_update(lt9611uxc);
914                         if (ret < 0)
915                                 goto err_disable_regulators;
916                         else
917                                 goto retry;
918                 } else {
919                         dev_err(dev, "FW version 0, update failed\n");
920                         ret = -EOPNOTSUPP;
921                         goto err_disable_regulators;
922                 }
923         } else if (ret < 0x40) {
924                 dev_info(dev, "FW version 0x%x, HPD not supported\n", ret);
925         } else {
926                 lt9611uxc->hpd_supported = true;
927         }
928         lt9611uxc->fw_version = ret;
929
930         init_waitqueue_head(&lt9611uxc->wq);
931         INIT_WORK(&lt9611uxc->work, lt9611uxc_hpd_work);
932
933         ret = request_threaded_irq(client->irq, NULL,
934                                    lt9611uxc_irq_thread_handler,
935                                    IRQF_ONESHOT, "lt9611uxc", lt9611uxc);
936         if (ret) {
937                 dev_err(dev, "failed to request irq\n");
938                 goto err_disable_regulators;
939         }
940
941         i2c_set_clientdata(client, lt9611uxc);
942
943         lt9611uxc->bridge.funcs = &lt9611uxc_bridge_funcs;
944         lt9611uxc->bridge.of_node = client->dev.of_node;
945         lt9611uxc->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID;
946         if (lt9611uxc->hpd_supported)
947                 lt9611uxc->bridge.ops |= DRM_BRIDGE_OP_HPD;
948         lt9611uxc->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
949
950         drm_bridge_add(&lt9611uxc->bridge);
951
952         /* Attach primary DSI */
953         lt9611uxc->dsi0 = lt9611uxc_attach_dsi(lt9611uxc, lt9611uxc->dsi0_node);
954         if (IS_ERR(lt9611uxc->dsi0)) {
955                 ret = PTR_ERR(lt9611uxc->dsi0);
956                 goto err_remove_bridge;
957         }
958
959         /* Attach secondary DSI, if specified */
960         if (lt9611uxc->dsi1_node) {
961                 lt9611uxc->dsi1 = lt9611uxc_attach_dsi(lt9611uxc, lt9611uxc->dsi1_node);
962                 if (IS_ERR(lt9611uxc->dsi1)) {
963                         ret = PTR_ERR(lt9611uxc->dsi1);
964                         goto err_remove_bridge;
965                 }
966         }
967
968         return lt9611uxc_audio_init(dev, lt9611uxc);
969
970 err_remove_bridge:
971         free_irq(client->irq, lt9611uxc);
972         cancel_work_sync(&lt9611uxc->work);
973         drm_bridge_remove(&lt9611uxc->bridge);
974
975 err_disable_regulators:
976         regulator_bulk_disable(ARRAY_SIZE(lt9611uxc->supplies), lt9611uxc->supplies);
977
978 err_of_put:
979         of_node_put(lt9611uxc->dsi1_node);
980         of_node_put(lt9611uxc->dsi0_node);
981
982         return ret;
983 }
984
985 static void lt9611uxc_remove(struct i2c_client *client)
986 {
987         struct lt9611uxc *lt9611uxc = i2c_get_clientdata(client);
988
989         free_irq(client->irq, lt9611uxc);
990         cancel_work_sync(&lt9611uxc->work);
991         lt9611uxc_audio_exit(lt9611uxc);
992         drm_bridge_remove(&lt9611uxc->bridge);
993
994         mutex_destroy(&lt9611uxc->ocm_lock);
995
996         regulator_bulk_disable(ARRAY_SIZE(lt9611uxc->supplies), lt9611uxc->supplies);
997
998         of_node_put(lt9611uxc->dsi1_node);
999         of_node_put(lt9611uxc->dsi0_node);
1000 }
1001
1002 static struct i2c_device_id lt9611uxc_id[] = {
1003         { "lontium,lt9611uxc", 0 },
1004         { /* sentinel */ }
1005 };
1006
1007 static const struct of_device_id lt9611uxc_match_table[] = {
1008         { .compatible = "lontium,lt9611uxc" },
1009         { /* sentinel */ }
1010 };
1011 MODULE_DEVICE_TABLE(of, lt9611uxc_match_table);
1012
1013 static struct i2c_driver lt9611uxc_driver = {
1014         .driver = {
1015                 .name = "lt9611uxc",
1016                 .of_match_table = lt9611uxc_match_table,
1017                 .dev_groups = lt9611uxc_attr_groups,
1018         },
1019         .probe = lt9611uxc_probe,
1020         .remove = lt9611uxc_remove,
1021         .id_table = lt9611uxc_id,
1022 };
1023 module_i2c_driver(lt9611uxc_driver);
1024
1025 MODULE_AUTHOR("Dmitry Baryshkov <dmitry.baryshkov@linaro.org>");
1026 MODULE_LICENSE("GPL v2");
1027
1028 MODULE_FIRMWARE(FW_FILE);