sched/doc: Update documentation for base_slice_ns and CONFIG_HZ relation
[sfrench/cifs-2.6.git] / drivers / greybus / es2.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Greybus "AP" USB driver for "ES2" controller chips
4  *
5  * Copyright 2014-2015 Google Inc.
6  * Copyright 2014-2015 Linaro Ltd.
7  */
8 #include <linux/kthread.h>
9 #include <linux/sizes.h>
10 #include <linux/usb.h>
11 #include <linux/kfifo.h>
12 #include <linux/debugfs.h>
13 #include <linux/list.h>
14 #include <linux/greybus.h>
15 #include <asm/unaligned.h>
16
17 #include "arpc.h"
18 #include "greybus_trace.h"
19
20
21 /* Default timeout for USB vendor requests. */
22 #define ES2_USB_CTRL_TIMEOUT    500
23
24 /* Default timeout for ARPC CPort requests */
25 #define ES2_ARPC_CPORT_TIMEOUT  500
26
27 /* Fixed CPort numbers */
28 #define ES2_CPORT_CDSI0         16
29 #define ES2_CPORT_CDSI1         17
30
31 /* Memory sizes for the buffers sent to/from the ES2 controller */
32 #define ES2_GBUF_MSG_SIZE_MAX   2048
33
34 /* Memory sizes for the ARPC buffers */
35 #define ARPC_OUT_SIZE_MAX       U16_MAX
36 #define ARPC_IN_SIZE_MAX        128
37
38 static const struct usb_device_id id_table[] = {
39         { USB_DEVICE(0x18d1, 0x1eaf) },
40         { },
41 };
42 MODULE_DEVICE_TABLE(usb, id_table);
43
44 #define APB1_LOG_SIZE           SZ_16K
45
46 /*
47  * Number of CPort IN urbs in flight at any point in time.
48  * Adjust if we are having stalls in the USB buffer due to not enough urbs in
49  * flight.
50  */
51 #define NUM_CPORT_IN_URB        4
52
53 /* Number of CPort OUT urbs in flight at any point in time.
54  * Adjust if we get messages saying we are out of urbs in the system log.
55  */
56 #define NUM_CPORT_OUT_URB       8
57
58 /*
59  * Number of ARPC in urbs in flight at any point in time.
60  */
61 #define NUM_ARPC_IN_URB         2
62
63 /*
64  * @endpoint: bulk in endpoint for CPort data
65  * @urb: array of urbs for the CPort in messages
66  * @buffer: array of buffers for the @cport_in_urb urbs
67  */
68 struct es2_cport_in {
69         __u8 endpoint;
70         struct urb *urb[NUM_CPORT_IN_URB];
71         u8 *buffer[NUM_CPORT_IN_URB];
72 };
73
74 /**
75  * struct es2_ap_dev - ES2 USB Bridge to AP structure
76  * @usb_dev: pointer to the USB device we are.
77  * @usb_intf: pointer to the USB interface we are bound to.
78  * @hd: pointer to our gb_host_device structure
79  *
80  * @cport_in: endpoint, urbs and buffer for cport in messages
81  * @cport_out_endpoint: endpoint for cport out messages
82  * @cport_out_urb: array of urbs for the CPort out messages
83  * @cport_out_urb_busy: array of flags to see if the @cport_out_urb is busy or
84  *                      not.
85  * @cport_out_urb_cancelled: array of flags indicating whether the
86  *                      corresponding @cport_out_urb is being cancelled
87  * @cport_out_urb_lock: locks the @cport_out_urb_busy "list"
88  * @cdsi1_in_use: true if cport CDSI1 is in use
89  * @apb_log_task: task pointer for logging thread
90  * @apb_log_dentry: file system entry for the log file interface
91  * @apb_log_enable_dentry: file system entry for enabling logging
92  * @apb_log_fifo: kernel FIFO to carry logged data
93  * @arpc_urb: array of urbs for the ARPC in messages
94  * @arpc_buffer: array of buffers for the @arpc_urb urbs
95  * @arpc_endpoint_in: bulk in endpoint for APBridgeA RPC
96  * @arpc_id_cycle: gives an unique id to ARPC
97  * @arpc_lock: locks ARPC list
98  * @arpcs: list of in progress ARPCs
99  */
100 struct es2_ap_dev {
101         struct usb_device *usb_dev;
102         struct usb_interface *usb_intf;
103         struct gb_host_device *hd;
104
105         struct es2_cport_in cport_in;
106         __u8 cport_out_endpoint;
107         struct urb *cport_out_urb[NUM_CPORT_OUT_URB];
108         bool cport_out_urb_busy[NUM_CPORT_OUT_URB];
109         bool cport_out_urb_cancelled[NUM_CPORT_OUT_URB];
110         spinlock_t cport_out_urb_lock;
111
112         bool cdsi1_in_use;
113
114         struct task_struct *apb_log_task;
115         struct dentry *apb_log_dentry;
116         struct dentry *apb_log_enable_dentry;
117         DECLARE_KFIFO(apb_log_fifo, char, APB1_LOG_SIZE);
118
119         __u8 arpc_endpoint_in;
120         struct urb *arpc_urb[NUM_ARPC_IN_URB];
121         u8 *arpc_buffer[NUM_ARPC_IN_URB];
122
123         int arpc_id_cycle;
124         spinlock_t arpc_lock;
125         struct list_head arpcs;
126 };
127
128 struct arpc {
129         struct list_head list;
130         struct arpc_request_message *req;
131         struct arpc_response_message *resp;
132         struct completion response_received;
133         bool active;
134 };
135
136 static inline struct es2_ap_dev *hd_to_es2(struct gb_host_device *hd)
137 {
138         return (struct es2_ap_dev *)&hd->hd_priv;
139 }
140
141 static void cport_out_callback(struct urb *urb);
142 static void usb_log_enable(struct es2_ap_dev *es2);
143 static void usb_log_disable(struct es2_ap_dev *es2);
144 static int arpc_sync(struct es2_ap_dev *es2, u8 type, void *payload,
145                      size_t size, int *result, unsigned int timeout);
146
147 static int output_sync(struct es2_ap_dev *es2, void *req, u16 size, u8 cmd)
148 {
149         struct usb_device *udev = es2->usb_dev;
150         u8 *data;
151         int retval;
152
153         data = kmemdup(req, size, GFP_KERNEL);
154         if (!data)
155                 return -ENOMEM;
156
157         retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
158                                  cmd,
159                                  USB_DIR_OUT | USB_TYPE_VENDOR |
160                                  USB_RECIP_INTERFACE,
161                                  0, 0, data, size, ES2_USB_CTRL_TIMEOUT);
162         if (retval < 0)
163                 dev_err(&udev->dev, "%s: return error %d\n", __func__, retval);
164         else
165                 retval = 0;
166
167         kfree(data);
168         return retval;
169 }
170
171 static void ap_urb_complete(struct urb *urb)
172 {
173         struct usb_ctrlrequest *dr = urb->context;
174
175         kfree(dr);
176         usb_free_urb(urb);
177 }
178
179 static int output_async(struct es2_ap_dev *es2, void *req, u16 size, u8 cmd)
180 {
181         struct usb_device *udev = es2->usb_dev;
182         struct urb *urb;
183         struct usb_ctrlrequest *dr;
184         u8 *buf;
185         int retval;
186
187         urb = usb_alloc_urb(0, GFP_ATOMIC);
188         if (!urb)
189                 return -ENOMEM;
190
191         dr = kmalloc(sizeof(*dr) + size, GFP_ATOMIC);
192         if (!dr) {
193                 usb_free_urb(urb);
194                 return -ENOMEM;
195         }
196
197         buf = (u8 *)dr + sizeof(*dr);
198         memcpy(buf, req, size);
199
200         dr->bRequest = cmd;
201         dr->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE;
202         dr->wValue = 0;
203         dr->wIndex = 0;
204         dr->wLength = cpu_to_le16(size);
205
206         usb_fill_control_urb(urb, udev, usb_sndctrlpipe(udev, 0),
207                              (unsigned char *)dr, buf, size,
208                              ap_urb_complete, dr);
209         retval = usb_submit_urb(urb, GFP_ATOMIC);
210         if (retval) {
211                 usb_free_urb(urb);
212                 kfree(dr);
213         }
214         return retval;
215 }
216
217 static int output(struct gb_host_device *hd, void *req, u16 size, u8 cmd,
218                   bool async)
219 {
220         struct es2_ap_dev *es2 = hd_to_es2(hd);
221
222         if (async)
223                 return output_async(es2, req, size, cmd);
224
225         return output_sync(es2, req, size, cmd);
226 }
227
228 static int es2_cport_in_enable(struct es2_ap_dev *es2,
229                                struct es2_cport_in *cport_in)
230 {
231         struct urb *urb;
232         int ret;
233         int i;
234
235         for (i = 0; i < NUM_CPORT_IN_URB; ++i) {
236                 urb = cport_in->urb[i];
237
238                 ret = usb_submit_urb(urb, GFP_KERNEL);
239                 if (ret) {
240                         dev_err(&es2->usb_dev->dev,
241                                 "failed to submit in-urb: %d\n", ret);
242                         goto err_kill_urbs;
243                 }
244         }
245
246         return 0;
247
248 err_kill_urbs:
249         for (--i; i >= 0; --i) {
250                 urb = cport_in->urb[i];
251                 usb_kill_urb(urb);
252         }
253
254         return ret;
255 }
256
257 static void es2_cport_in_disable(struct es2_ap_dev *es2,
258                                  struct es2_cport_in *cport_in)
259 {
260         struct urb *urb;
261         int i;
262
263         for (i = 0; i < NUM_CPORT_IN_URB; ++i) {
264                 urb = cport_in->urb[i];
265                 usb_kill_urb(urb);
266         }
267 }
268
269 static int es2_arpc_in_enable(struct es2_ap_dev *es2)
270 {
271         struct urb *urb;
272         int ret;
273         int i;
274
275         for (i = 0; i < NUM_ARPC_IN_URB; ++i) {
276                 urb = es2->arpc_urb[i];
277
278                 ret = usb_submit_urb(urb, GFP_KERNEL);
279                 if (ret) {
280                         dev_err(&es2->usb_dev->dev,
281                                 "failed to submit arpc in-urb: %d\n", ret);
282                         goto err_kill_urbs;
283                 }
284         }
285
286         return 0;
287
288 err_kill_urbs:
289         for (--i; i >= 0; --i) {
290                 urb = es2->arpc_urb[i];
291                 usb_kill_urb(urb);
292         }
293
294         return ret;
295 }
296
297 static void es2_arpc_in_disable(struct es2_ap_dev *es2)
298 {
299         struct urb *urb;
300         int i;
301
302         for (i = 0; i < NUM_ARPC_IN_URB; ++i) {
303                 urb = es2->arpc_urb[i];
304                 usb_kill_urb(urb);
305         }
306 }
307
308 static struct urb *next_free_urb(struct es2_ap_dev *es2, gfp_t gfp_mask)
309 {
310         struct urb *urb = NULL;
311         unsigned long flags;
312         int i;
313
314         spin_lock_irqsave(&es2->cport_out_urb_lock, flags);
315
316         /* Look in our pool of allocated urbs first, as that's the "fastest" */
317         for (i = 0; i < NUM_CPORT_OUT_URB; ++i) {
318                 if (!es2->cport_out_urb_busy[i] &&
319                     !es2->cport_out_urb_cancelled[i]) {
320                         es2->cport_out_urb_busy[i] = true;
321                         urb = es2->cport_out_urb[i];
322                         break;
323                 }
324         }
325         spin_unlock_irqrestore(&es2->cport_out_urb_lock, flags);
326         if (urb)
327                 return urb;
328
329         /*
330          * Crap, pool is empty, complain to the syslog and go allocate one
331          * dynamically as we have to succeed.
332          */
333         dev_dbg(&es2->usb_dev->dev,
334                 "No free CPort OUT urbs, having to dynamically allocate one!\n");
335         return usb_alloc_urb(0, gfp_mask);
336 }
337
338 static void free_urb(struct es2_ap_dev *es2, struct urb *urb)
339 {
340         unsigned long flags;
341         int i;
342         /*
343          * See if this was an urb in our pool, if so mark it "free", otherwise
344          * we need to free it ourselves.
345          */
346         spin_lock_irqsave(&es2->cport_out_urb_lock, flags);
347         for (i = 0; i < NUM_CPORT_OUT_URB; ++i) {
348                 if (urb == es2->cport_out_urb[i]) {
349                         es2->cport_out_urb_busy[i] = false;
350                         urb = NULL;
351                         break;
352                 }
353         }
354         spin_unlock_irqrestore(&es2->cport_out_urb_lock, flags);
355
356         /* If urb is not NULL, then we need to free this urb */
357         usb_free_urb(urb);
358 }
359
360 /*
361  * We (ab)use the operation-message header pad bytes to transfer the
362  * cport id in order to minimise overhead.
363  */
364 static void
365 gb_message_cport_pack(struct gb_operation_msg_hdr *header, u16 cport_id)
366 {
367         header->pad[0] = cport_id;
368 }
369
370 /* Clear the pad bytes used for the CPort id */
371 static void gb_message_cport_clear(struct gb_operation_msg_hdr *header)
372 {
373         header->pad[0] = 0;
374 }
375
376 /* Extract the CPort id packed into the header, and clear it */
377 static u16 gb_message_cport_unpack(struct gb_operation_msg_hdr *header)
378 {
379         u16 cport_id = header->pad[0];
380
381         gb_message_cport_clear(header);
382
383         return cport_id;
384 }
385
386 /*
387  * Returns zero if the message was successfully queued, or a negative errno
388  * otherwise.
389  */
390 static int message_send(struct gb_host_device *hd, u16 cport_id,
391                         struct gb_message *message, gfp_t gfp_mask)
392 {
393         struct es2_ap_dev *es2 = hd_to_es2(hd);
394         struct usb_device *udev = es2->usb_dev;
395         size_t buffer_size;
396         int retval;
397         struct urb *urb;
398         unsigned long flags;
399
400         /*
401          * The data actually transferred will include an indication
402          * of where the data should be sent.  Do one last check of
403          * the target CPort id before filling it in.
404          */
405         if (!cport_id_valid(hd, cport_id)) {
406                 dev_err(&udev->dev, "invalid cport %u\n", cport_id);
407                 return -EINVAL;
408         }
409
410         /* Find a free urb */
411         urb = next_free_urb(es2, gfp_mask);
412         if (!urb)
413                 return -ENOMEM;
414
415         spin_lock_irqsave(&es2->cport_out_urb_lock, flags);
416         message->hcpriv = urb;
417         spin_unlock_irqrestore(&es2->cport_out_urb_lock, flags);
418
419         /* Pack the cport id into the message header */
420         gb_message_cport_pack(message->header, cport_id);
421
422         buffer_size = sizeof(*message->header) + message->payload_size;
423
424         usb_fill_bulk_urb(urb, udev,
425                           usb_sndbulkpipe(udev,
426                                           es2->cport_out_endpoint),
427                           message->buffer, buffer_size,
428                           cport_out_callback, message);
429         urb->transfer_flags |= URB_ZERO_PACKET;
430
431         trace_gb_message_submit(message);
432
433         retval = usb_submit_urb(urb, gfp_mask);
434         if (retval) {
435                 dev_err(&udev->dev, "failed to submit out-urb: %d\n", retval);
436
437                 spin_lock_irqsave(&es2->cport_out_urb_lock, flags);
438                 message->hcpriv = NULL;
439                 spin_unlock_irqrestore(&es2->cport_out_urb_lock, flags);
440
441                 free_urb(es2, urb);
442                 gb_message_cport_clear(message->header);
443
444                 return retval;
445         }
446
447         return 0;
448 }
449
450 /*
451  * Can not be called in atomic context.
452  */
453 static void message_cancel(struct gb_message *message)
454 {
455         struct gb_host_device *hd = message->operation->connection->hd;
456         struct es2_ap_dev *es2 = hd_to_es2(hd);
457         struct urb *urb;
458         int i;
459
460         might_sleep();
461
462         spin_lock_irq(&es2->cport_out_urb_lock);
463         urb = message->hcpriv;
464
465         /* Prevent dynamically allocated urb from being deallocated. */
466         usb_get_urb(urb);
467
468         /* Prevent pre-allocated urb from being reused. */
469         for (i = 0; i < NUM_CPORT_OUT_URB; ++i) {
470                 if (urb == es2->cport_out_urb[i]) {
471                         es2->cport_out_urb_cancelled[i] = true;
472                         break;
473                 }
474         }
475         spin_unlock_irq(&es2->cport_out_urb_lock);
476
477         usb_kill_urb(urb);
478
479         if (i < NUM_CPORT_OUT_URB) {
480                 spin_lock_irq(&es2->cport_out_urb_lock);
481                 es2->cport_out_urb_cancelled[i] = false;
482                 spin_unlock_irq(&es2->cport_out_urb_lock);
483         }
484
485         usb_free_urb(urb);
486 }
487
488 static int es2_cport_allocate(struct gb_host_device *hd, int cport_id,
489                               unsigned long flags)
490 {
491         struct es2_ap_dev *es2 = hd_to_es2(hd);
492         struct ida *id_map = &hd->cport_id_map;
493         int ida_start, ida_end;
494
495         switch (cport_id) {
496         case ES2_CPORT_CDSI0:
497         case ES2_CPORT_CDSI1:
498                 dev_err(&hd->dev, "cport %d not available\n", cport_id);
499                 return -EBUSY;
500         }
501
502         if (flags & GB_CONNECTION_FLAG_OFFLOADED &&
503             flags & GB_CONNECTION_FLAG_CDSI1) {
504                 if (es2->cdsi1_in_use) {
505                         dev_err(&hd->dev, "CDSI1 already in use\n");
506                         return -EBUSY;
507                 }
508
509                 es2->cdsi1_in_use = true;
510
511                 return ES2_CPORT_CDSI1;
512         }
513
514         if (cport_id < 0) {
515                 ida_start = 0;
516                 ida_end = hd->num_cports;
517         } else if (cport_id < hd->num_cports) {
518                 ida_start = cport_id;
519                 ida_end = cport_id + 1;
520         } else {
521                 dev_err(&hd->dev, "cport %d not available\n", cport_id);
522                 return -EINVAL;
523         }
524
525         return ida_simple_get(id_map, ida_start, ida_end, GFP_KERNEL);
526 }
527
528 static void es2_cport_release(struct gb_host_device *hd, u16 cport_id)
529 {
530         struct es2_ap_dev *es2 = hd_to_es2(hd);
531
532         switch (cport_id) {
533         case ES2_CPORT_CDSI1:
534                 es2->cdsi1_in_use = false;
535                 return;
536         }
537
538         ida_simple_remove(&hd->cport_id_map, cport_id);
539 }
540
541 static int cport_enable(struct gb_host_device *hd, u16 cport_id,
542                         unsigned long flags)
543 {
544         struct es2_ap_dev *es2 = hd_to_es2(hd);
545         struct usb_device *udev = es2->usb_dev;
546         struct gb_apb_request_cport_flags *req;
547         u32 connection_flags;
548         int ret;
549
550         req = kzalloc(sizeof(*req), GFP_KERNEL);
551         if (!req)
552                 return -ENOMEM;
553
554         connection_flags = 0;
555         if (flags & GB_CONNECTION_FLAG_CONTROL)
556                 connection_flags |= GB_APB_CPORT_FLAG_CONTROL;
557         if (flags & GB_CONNECTION_FLAG_HIGH_PRIO)
558                 connection_flags |= GB_APB_CPORT_FLAG_HIGH_PRIO;
559
560         req->flags = cpu_to_le32(connection_flags);
561
562         dev_dbg(&hd->dev, "%s - cport = %u, flags = %02x\n", __func__,
563                 cport_id, connection_flags);
564
565         ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
566                               GB_APB_REQUEST_CPORT_FLAGS,
567                               USB_DIR_OUT | USB_TYPE_VENDOR |
568                               USB_RECIP_INTERFACE, cport_id, 0,
569                               req, sizeof(*req), ES2_USB_CTRL_TIMEOUT);
570         if (ret < 0) {
571                 dev_err(&udev->dev, "failed to set cport flags for port %d\n",
572                         cport_id);
573                 goto out;
574         }
575
576         ret = 0;
577 out:
578         kfree(req);
579
580         return ret;
581 }
582
583 static int es2_cport_connected(struct gb_host_device *hd, u16 cport_id)
584 {
585         struct es2_ap_dev *es2 = hd_to_es2(hd);
586         struct device *dev = &es2->usb_dev->dev;
587         struct arpc_cport_connected_req req;
588         int ret;
589
590         req.cport_id = cpu_to_le16(cport_id);
591         ret = arpc_sync(es2, ARPC_TYPE_CPORT_CONNECTED, &req, sizeof(req),
592                         NULL, ES2_ARPC_CPORT_TIMEOUT);
593         if (ret) {
594                 dev_err(dev, "failed to set connected state for cport %u: %d\n",
595                         cport_id, ret);
596                 return ret;
597         }
598
599         return 0;
600 }
601
602 static int es2_cport_flush(struct gb_host_device *hd, u16 cport_id)
603 {
604         struct es2_ap_dev *es2 = hd_to_es2(hd);
605         struct device *dev = &es2->usb_dev->dev;
606         struct arpc_cport_flush_req req;
607         int ret;
608
609         req.cport_id = cpu_to_le16(cport_id);
610         ret = arpc_sync(es2, ARPC_TYPE_CPORT_FLUSH, &req, sizeof(req),
611                         NULL, ES2_ARPC_CPORT_TIMEOUT);
612         if (ret) {
613                 dev_err(dev, "failed to flush cport %u: %d\n", cport_id, ret);
614                 return ret;
615         }
616
617         return 0;
618 }
619
620 static int es2_cport_shutdown(struct gb_host_device *hd, u16 cport_id,
621                               u8 phase, unsigned int timeout)
622 {
623         struct es2_ap_dev *es2 = hd_to_es2(hd);
624         struct device *dev = &es2->usb_dev->dev;
625         struct arpc_cport_shutdown_req req;
626         int result;
627         int ret;
628
629         if (timeout > U16_MAX)
630                 return -EINVAL;
631
632         req.cport_id = cpu_to_le16(cport_id);
633         req.timeout = cpu_to_le16(timeout);
634         req.phase = phase;
635         ret = arpc_sync(es2, ARPC_TYPE_CPORT_SHUTDOWN, &req, sizeof(req),
636                         &result, ES2_ARPC_CPORT_TIMEOUT + timeout);
637         if (ret) {
638                 dev_err(dev, "failed to send shutdown over cport %u: %d (%d)\n",
639                         cport_id, ret, result);
640                 return ret;
641         }
642
643         return 0;
644 }
645
646 static int es2_cport_quiesce(struct gb_host_device *hd, u16 cport_id,
647                              size_t peer_space, unsigned int timeout)
648 {
649         struct es2_ap_dev *es2 = hd_to_es2(hd);
650         struct device *dev = &es2->usb_dev->dev;
651         struct arpc_cport_quiesce_req req;
652         int result;
653         int ret;
654
655         if (peer_space > U16_MAX)
656                 return -EINVAL;
657
658         if (timeout > U16_MAX)
659                 return -EINVAL;
660
661         req.cport_id = cpu_to_le16(cport_id);
662         req.peer_space = cpu_to_le16(peer_space);
663         req.timeout = cpu_to_le16(timeout);
664         ret = arpc_sync(es2, ARPC_TYPE_CPORT_QUIESCE, &req, sizeof(req),
665                         &result, ES2_ARPC_CPORT_TIMEOUT + timeout);
666         if (ret) {
667                 dev_err(dev, "failed to quiesce cport %u: %d (%d)\n",
668                         cport_id, ret, result);
669                 return ret;
670         }
671
672         return 0;
673 }
674
675 static int es2_cport_clear(struct gb_host_device *hd, u16 cport_id)
676 {
677         struct es2_ap_dev *es2 = hd_to_es2(hd);
678         struct device *dev = &es2->usb_dev->dev;
679         struct arpc_cport_clear_req req;
680         int ret;
681
682         req.cport_id = cpu_to_le16(cport_id);
683         ret = arpc_sync(es2, ARPC_TYPE_CPORT_CLEAR, &req, sizeof(req),
684                         NULL, ES2_ARPC_CPORT_TIMEOUT);
685         if (ret) {
686                 dev_err(dev, "failed to clear cport %u: %d\n", cport_id, ret);
687                 return ret;
688         }
689
690         return 0;
691 }
692
693 static int latency_tag_enable(struct gb_host_device *hd, u16 cport_id)
694 {
695         int retval;
696         struct es2_ap_dev *es2 = hd_to_es2(hd);
697         struct usb_device *udev = es2->usb_dev;
698
699         retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
700                                  GB_APB_REQUEST_LATENCY_TAG_EN,
701                                  USB_DIR_OUT | USB_TYPE_VENDOR |
702                                  USB_RECIP_INTERFACE, cport_id, 0, NULL,
703                                  0, ES2_USB_CTRL_TIMEOUT);
704
705         if (retval < 0)
706                 dev_err(&udev->dev, "Cannot enable latency tag for cport %d\n",
707                         cport_id);
708         return retval;
709 }
710
711 static int latency_tag_disable(struct gb_host_device *hd, u16 cport_id)
712 {
713         int retval;
714         struct es2_ap_dev *es2 = hd_to_es2(hd);
715         struct usb_device *udev = es2->usb_dev;
716
717         retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
718                                  GB_APB_REQUEST_LATENCY_TAG_DIS,
719                                  USB_DIR_OUT | USB_TYPE_VENDOR |
720                                  USB_RECIP_INTERFACE, cport_id, 0, NULL,
721                                  0, ES2_USB_CTRL_TIMEOUT);
722
723         if (retval < 0)
724                 dev_err(&udev->dev, "Cannot disable latency tag for cport %d\n",
725                         cport_id);
726         return retval;
727 }
728
729 static struct gb_hd_driver es2_driver = {
730         .hd_priv_size                   = sizeof(struct es2_ap_dev),
731         .message_send                   = message_send,
732         .message_cancel                 = message_cancel,
733         .cport_allocate                 = es2_cport_allocate,
734         .cport_release                  = es2_cport_release,
735         .cport_enable                   = cport_enable,
736         .cport_connected                = es2_cport_connected,
737         .cport_flush                    = es2_cport_flush,
738         .cport_shutdown                 = es2_cport_shutdown,
739         .cport_quiesce                  = es2_cport_quiesce,
740         .cport_clear                    = es2_cport_clear,
741         .latency_tag_enable             = latency_tag_enable,
742         .latency_tag_disable            = latency_tag_disable,
743         .output                         = output,
744 };
745
746 /* Common function to report consistent warnings based on URB status */
747 static int check_urb_status(struct urb *urb)
748 {
749         struct device *dev = &urb->dev->dev;
750         int status = urb->status;
751
752         switch (status) {
753         case 0:
754                 return 0;
755
756         case -EOVERFLOW:
757                 dev_err(dev, "%s: overflow actual length is %d\n",
758                         __func__, urb->actual_length);
759                 fallthrough;
760         case -ECONNRESET:
761         case -ENOENT:
762         case -ESHUTDOWN:
763         case -EILSEQ:
764         case -EPROTO:
765                 /* device is gone, stop sending */
766                 return status;
767         }
768         dev_err(dev, "%s: unknown status %d\n", __func__, status);
769
770         return -EAGAIN;
771 }
772
773 static void es2_destroy(struct es2_ap_dev *es2)
774 {
775         struct usb_device *udev;
776         struct urb *urb;
777         int i;
778
779         debugfs_remove(es2->apb_log_enable_dentry);
780         usb_log_disable(es2);
781
782         /* Tear down everything! */
783         for (i = 0; i < NUM_CPORT_OUT_URB; ++i) {
784                 urb = es2->cport_out_urb[i];
785                 usb_kill_urb(urb);
786                 usb_free_urb(urb);
787                 es2->cport_out_urb[i] = NULL;
788                 es2->cport_out_urb_busy[i] = false;     /* just to be anal */
789         }
790
791         for (i = 0; i < NUM_ARPC_IN_URB; ++i) {
792                 usb_free_urb(es2->arpc_urb[i]);
793                 kfree(es2->arpc_buffer[i]);
794                 es2->arpc_buffer[i] = NULL;
795         }
796
797         for (i = 0; i < NUM_CPORT_IN_URB; ++i) {
798                 usb_free_urb(es2->cport_in.urb[i]);
799                 kfree(es2->cport_in.buffer[i]);
800                 es2->cport_in.buffer[i] = NULL;
801         }
802
803         /* release reserved CDSI0 and CDSI1 cports */
804         gb_hd_cport_release_reserved(es2->hd, ES2_CPORT_CDSI1);
805         gb_hd_cport_release_reserved(es2->hd, ES2_CPORT_CDSI0);
806
807         udev = es2->usb_dev;
808         gb_hd_put(es2->hd);
809
810         usb_put_dev(udev);
811 }
812
813 static void cport_in_callback(struct urb *urb)
814 {
815         struct gb_host_device *hd = urb->context;
816         struct device *dev = &urb->dev->dev;
817         struct gb_operation_msg_hdr *header;
818         int status = check_urb_status(urb);
819         int retval;
820         u16 cport_id;
821
822         if (status) {
823                 if ((status == -EAGAIN) || (status == -EPROTO))
824                         goto exit;
825
826                 /* The urb is being unlinked */
827                 if (status == -ENOENT || status == -ESHUTDOWN)
828                         return;
829
830                 dev_err(dev, "urb cport in error %d (dropped)\n", status);
831                 return;
832         }
833
834         if (urb->actual_length < sizeof(*header)) {
835                 dev_err(dev, "short message received\n");
836                 goto exit;
837         }
838
839         /* Extract the CPort id, which is packed in the message header */
840         header = urb->transfer_buffer;
841         cport_id = gb_message_cport_unpack(header);
842
843         if (cport_id_valid(hd, cport_id)) {
844                 greybus_data_rcvd(hd, cport_id, urb->transfer_buffer,
845                                   urb->actual_length);
846         } else {
847                 dev_err(dev, "invalid cport id %u received\n", cport_id);
848         }
849 exit:
850         /* put our urb back in the request pool */
851         retval = usb_submit_urb(urb, GFP_ATOMIC);
852         if (retval)
853                 dev_err(dev, "failed to resubmit in-urb: %d\n", retval);
854 }
855
856 static void cport_out_callback(struct urb *urb)
857 {
858         struct gb_message *message = urb->context;
859         struct gb_host_device *hd = message->operation->connection->hd;
860         struct es2_ap_dev *es2 = hd_to_es2(hd);
861         int status = check_urb_status(urb);
862         unsigned long flags;
863
864         gb_message_cport_clear(message->header);
865
866         spin_lock_irqsave(&es2->cport_out_urb_lock, flags);
867         message->hcpriv = NULL;
868         spin_unlock_irqrestore(&es2->cport_out_urb_lock, flags);
869
870         /*
871          * Tell the submitter that the message send (attempt) is
872          * complete, and report the status.
873          */
874         greybus_message_sent(hd, message, status);
875
876         free_urb(es2, urb);
877 }
878
879 static struct arpc *arpc_alloc(void *payload, u16 size, u8 type)
880 {
881         struct arpc *rpc;
882
883         if (size + sizeof(*rpc->req) > ARPC_OUT_SIZE_MAX)
884                 return NULL;
885
886         rpc = kzalloc(sizeof(*rpc), GFP_KERNEL);
887         if (!rpc)
888                 return NULL;
889
890         INIT_LIST_HEAD(&rpc->list);
891         rpc->req = kzalloc(sizeof(*rpc->req) + size, GFP_KERNEL);
892         if (!rpc->req)
893                 goto err_free_rpc;
894
895         rpc->resp = kzalloc(sizeof(*rpc->resp), GFP_KERNEL);
896         if (!rpc->resp)
897                 goto err_free_req;
898
899         rpc->req->type = type;
900         rpc->req->size = cpu_to_le16(sizeof(*rpc->req) + size);
901         memcpy(rpc->req->data, payload, size);
902
903         init_completion(&rpc->response_received);
904
905         return rpc;
906
907 err_free_req:
908         kfree(rpc->req);
909 err_free_rpc:
910         kfree(rpc);
911
912         return NULL;
913 }
914
915 static void arpc_free(struct arpc *rpc)
916 {
917         kfree(rpc->req);
918         kfree(rpc->resp);
919         kfree(rpc);
920 }
921
922 static struct arpc *arpc_find(struct es2_ap_dev *es2, __le16 id)
923 {
924         struct arpc *rpc;
925
926         list_for_each_entry(rpc, &es2->arpcs, list) {
927                 if (rpc->req->id == id)
928                         return rpc;
929         }
930
931         return NULL;
932 }
933
934 static void arpc_add(struct es2_ap_dev *es2, struct arpc *rpc)
935 {
936         rpc->active = true;
937         rpc->req->id = cpu_to_le16(es2->arpc_id_cycle++);
938         list_add_tail(&rpc->list, &es2->arpcs);
939 }
940
941 static void arpc_del(struct es2_ap_dev *es2, struct arpc *rpc)
942 {
943         if (rpc->active) {
944                 rpc->active = false;
945                 list_del(&rpc->list);
946         }
947 }
948
949 static int arpc_send(struct es2_ap_dev *es2, struct arpc *rpc, int timeout)
950 {
951         struct usb_device *udev = es2->usb_dev;
952         int retval;
953
954         retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
955                                  GB_APB_REQUEST_ARPC_RUN,
956                                  USB_DIR_OUT | USB_TYPE_VENDOR |
957                                  USB_RECIP_INTERFACE,
958                                  0, 0,
959                                  rpc->req, le16_to_cpu(rpc->req->size),
960                                  ES2_USB_CTRL_TIMEOUT);
961         if (retval < 0) {
962                 dev_err(&udev->dev,
963                         "failed to send ARPC request %d: %d\n",
964                         rpc->req->type, retval);
965                 return retval;
966         }
967
968         return 0;
969 }
970
971 static int arpc_sync(struct es2_ap_dev *es2, u8 type, void *payload,
972                      size_t size, int *result, unsigned int timeout)
973 {
974         struct arpc *rpc;
975         unsigned long flags;
976         int retval;
977
978         if (result)
979                 *result = 0;
980
981         rpc = arpc_alloc(payload, size, type);
982         if (!rpc)
983                 return -ENOMEM;
984
985         spin_lock_irqsave(&es2->arpc_lock, flags);
986         arpc_add(es2, rpc);
987         spin_unlock_irqrestore(&es2->arpc_lock, flags);
988
989         retval = arpc_send(es2, rpc, timeout);
990         if (retval)
991                 goto out_arpc_del;
992
993         retval = wait_for_completion_interruptible_timeout(
994                                                 &rpc->response_received,
995                                                 msecs_to_jiffies(timeout));
996         if (retval <= 0) {
997                 if (!retval)
998                         retval = -ETIMEDOUT;
999                 goto out_arpc_del;
1000         }
1001
1002         if (rpc->resp->result) {
1003                 retval = -EREMOTEIO;
1004                 if (result)
1005                         *result = rpc->resp->result;
1006         } else {
1007                 retval = 0;
1008         }
1009
1010 out_arpc_del:
1011         spin_lock_irqsave(&es2->arpc_lock, flags);
1012         arpc_del(es2, rpc);
1013         spin_unlock_irqrestore(&es2->arpc_lock, flags);
1014         arpc_free(rpc);
1015
1016         if (retval < 0 && retval != -EREMOTEIO) {
1017                 dev_err(&es2->usb_dev->dev,
1018                         "failed to execute ARPC: %d\n", retval);
1019         }
1020
1021         return retval;
1022 }
1023
1024 static void arpc_in_callback(struct urb *urb)
1025 {
1026         struct es2_ap_dev *es2 = urb->context;
1027         struct device *dev = &urb->dev->dev;
1028         int status = check_urb_status(urb);
1029         struct arpc *rpc;
1030         struct arpc_response_message *resp;
1031         unsigned long flags;
1032         int retval;
1033
1034         if (status) {
1035                 if ((status == -EAGAIN) || (status == -EPROTO))
1036                         goto exit;
1037
1038                 /* The urb is being unlinked */
1039                 if (status == -ENOENT || status == -ESHUTDOWN)
1040                         return;
1041
1042                 dev_err(dev, "arpc in-urb error %d (dropped)\n", status);
1043                 return;
1044         }
1045
1046         if (urb->actual_length < sizeof(*resp)) {
1047                 dev_err(dev, "short aprc response received\n");
1048                 goto exit;
1049         }
1050
1051         resp = urb->transfer_buffer;
1052         spin_lock_irqsave(&es2->arpc_lock, flags);
1053         rpc = arpc_find(es2, resp->id);
1054         if (!rpc) {
1055                 dev_err(dev, "invalid arpc response id received: %u\n",
1056                         le16_to_cpu(resp->id));
1057                 spin_unlock_irqrestore(&es2->arpc_lock, flags);
1058                 goto exit;
1059         }
1060
1061         arpc_del(es2, rpc);
1062         memcpy(rpc->resp, resp, sizeof(*resp));
1063         complete(&rpc->response_received);
1064         spin_unlock_irqrestore(&es2->arpc_lock, flags);
1065
1066 exit:
1067         /* put our urb back in the request pool */
1068         retval = usb_submit_urb(urb, GFP_ATOMIC);
1069         if (retval)
1070                 dev_err(dev, "failed to resubmit arpc in-urb: %d\n", retval);
1071 }
1072
1073 #define APB1_LOG_MSG_SIZE       64
1074 static void apb_log_get(struct es2_ap_dev *es2, char *buf)
1075 {
1076         int retval;
1077
1078         do {
1079                 retval = usb_control_msg(es2->usb_dev,
1080                                          usb_rcvctrlpipe(es2->usb_dev, 0),
1081                                          GB_APB_REQUEST_LOG,
1082                                          USB_DIR_IN | USB_TYPE_VENDOR |
1083                                          USB_RECIP_INTERFACE,
1084                                          0x00, 0x00,
1085                                          buf,
1086                                          APB1_LOG_MSG_SIZE,
1087                                          ES2_USB_CTRL_TIMEOUT);
1088                 if (retval > 0)
1089                         kfifo_in(&es2->apb_log_fifo, buf, retval);
1090         } while (retval > 0);
1091 }
1092
1093 static int apb_log_poll(void *data)
1094 {
1095         struct es2_ap_dev *es2 = data;
1096         char *buf;
1097
1098         buf = kmalloc(APB1_LOG_MSG_SIZE, GFP_KERNEL);
1099         if (!buf)
1100                 return -ENOMEM;
1101
1102         while (!kthread_should_stop()) {
1103                 msleep(1000);
1104                 apb_log_get(es2, buf);
1105         }
1106
1107         kfree(buf);
1108
1109         return 0;
1110 }
1111
1112 static ssize_t apb_log_read(struct file *f, char __user *buf,
1113                             size_t count, loff_t *ppos)
1114 {
1115         struct es2_ap_dev *es2 = file_inode(f)->i_private;
1116         ssize_t ret;
1117         size_t copied;
1118         char *tmp_buf;
1119
1120         if (count > APB1_LOG_SIZE)
1121                 count = APB1_LOG_SIZE;
1122
1123         tmp_buf = kmalloc(count, GFP_KERNEL);
1124         if (!tmp_buf)
1125                 return -ENOMEM;
1126
1127         copied = kfifo_out(&es2->apb_log_fifo, tmp_buf, count);
1128         ret = simple_read_from_buffer(buf, count, ppos, tmp_buf, copied);
1129
1130         kfree(tmp_buf);
1131
1132         return ret;
1133 }
1134
1135 static const struct file_operations apb_log_fops = {
1136         .read   = apb_log_read,
1137 };
1138
1139 static void usb_log_enable(struct es2_ap_dev *es2)
1140 {
1141         if (!IS_ERR_OR_NULL(es2->apb_log_task))
1142                 return;
1143
1144         /* get log from APB1 */
1145         es2->apb_log_task = kthread_run(apb_log_poll, es2, "apb_log");
1146         if (IS_ERR(es2->apb_log_task))
1147                 return;
1148         /* XXX We will need to rename this per APB */
1149         es2->apb_log_dentry = debugfs_create_file("apb_log", 0444,
1150                                                   gb_debugfs_get(), es2,
1151                                                   &apb_log_fops);
1152 }
1153
1154 static void usb_log_disable(struct es2_ap_dev *es2)
1155 {
1156         if (IS_ERR_OR_NULL(es2->apb_log_task))
1157                 return;
1158
1159         debugfs_remove(es2->apb_log_dentry);
1160         es2->apb_log_dentry = NULL;
1161
1162         kthread_stop(es2->apb_log_task);
1163         es2->apb_log_task = NULL;
1164 }
1165
1166 static ssize_t apb_log_enable_read(struct file *f, char __user *buf,
1167                                    size_t count, loff_t *ppos)
1168 {
1169         struct es2_ap_dev *es2 = file_inode(f)->i_private;
1170         int enable = !IS_ERR_OR_NULL(es2->apb_log_task);
1171         char tmp_buf[3];
1172
1173         sprintf(tmp_buf, "%d\n", enable);
1174         return simple_read_from_buffer(buf, count, ppos, tmp_buf, 2);
1175 }
1176
1177 static ssize_t apb_log_enable_write(struct file *f, const char __user *buf,
1178                                     size_t count, loff_t *ppos)
1179 {
1180         int enable;
1181         ssize_t retval;
1182         struct es2_ap_dev *es2 = file_inode(f)->i_private;
1183
1184         retval = kstrtoint_from_user(buf, count, 10, &enable);
1185         if (retval)
1186                 return retval;
1187
1188         if (enable)
1189                 usb_log_enable(es2);
1190         else
1191                 usb_log_disable(es2);
1192
1193         return count;
1194 }
1195
1196 static const struct file_operations apb_log_enable_fops = {
1197         .read   = apb_log_enable_read,
1198         .write  = apb_log_enable_write,
1199 };
1200
1201 static int apb_get_cport_count(struct usb_device *udev)
1202 {
1203         int retval;
1204         __le16 *cport_count;
1205
1206         cport_count = kzalloc(sizeof(*cport_count), GFP_KERNEL);
1207         if (!cport_count)
1208                 return -ENOMEM;
1209
1210         retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
1211                                  GB_APB_REQUEST_CPORT_COUNT,
1212                                  USB_DIR_IN | USB_TYPE_VENDOR |
1213                                  USB_RECIP_INTERFACE, 0, 0, cport_count,
1214                                  sizeof(*cport_count), ES2_USB_CTRL_TIMEOUT);
1215         if (retval != sizeof(*cport_count)) {
1216                 dev_err(&udev->dev, "Cannot retrieve CPort count: %d\n",
1217                         retval);
1218
1219                 if (retval >= 0)
1220                         retval = -EIO;
1221
1222                 goto out;
1223         }
1224
1225         retval = le16_to_cpu(*cport_count);
1226
1227         /* We need to fit a CPort ID in one byte of a message header */
1228         if (retval > U8_MAX) {
1229                 retval = U8_MAX;
1230                 dev_warn(&udev->dev, "Limiting number of CPorts to U8_MAX\n");
1231         }
1232
1233 out:
1234         kfree(cport_count);
1235         return retval;
1236 }
1237
1238 /*
1239  * The ES2 USB Bridge device has 15 endpoints
1240  * 1 Control - usual USB stuff + AP -> APBridgeA messages
1241  * 7 Bulk IN - CPort data in
1242  * 7 Bulk OUT - CPort data out
1243  */
1244 static int ap_probe(struct usb_interface *interface,
1245                     const struct usb_device_id *id)
1246 {
1247         struct es2_ap_dev *es2;
1248         struct gb_host_device *hd;
1249         struct usb_device *udev;
1250         struct usb_host_interface *iface_desc;
1251         struct usb_endpoint_descriptor *endpoint;
1252         __u8 ep_addr;
1253         int retval;
1254         int i;
1255         int num_cports;
1256         bool bulk_out_found = false;
1257         bool bulk_in_found = false;
1258         bool arpc_in_found = false;
1259
1260         udev = usb_get_dev(interface_to_usbdev(interface));
1261
1262         num_cports = apb_get_cport_count(udev);
1263         if (num_cports < 0) {
1264                 usb_put_dev(udev);
1265                 dev_err(&udev->dev, "Cannot retrieve CPort count: %d\n",
1266                         num_cports);
1267                 return num_cports;
1268         }
1269
1270         hd = gb_hd_create(&es2_driver, &udev->dev, ES2_GBUF_MSG_SIZE_MAX,
1271                           num_cports);
1272         if (IS_ERR(hd)) {
1273                 usb_put_dev(udev);
1274                 return PTR_ERR(hd);
1275         }
1276
1277         es2 = hd_to_es2(hd);
1278         es2->hd = hd;
1279         es2->usb_intf = interface;
1280         es2->usb_dev = udev;
1281         spin_lock_init(&es2->cport_out_urb_lock);
1282         INIT_KFIFO(es2->apb_log_fifo);
1283         usb_set_intfdata(interface, es2);
1284
1285         /*
1286          * Reserve the CDSI0 and CDSI1 CPorts so they won't be allocated
1287          * dynamically.
1288          */
1289         retval = gb_hd_cport_reserve(hd, ES2_CPORT_CDSI0);
1290         if (retval)
1291                 goto error;
1292         retval = gb_hd_cport_reserve(hd, ES2_CPORT_CDSI1);
1293         if (retval)
1294                 goto error;
1295
1296         /* find all bulk endpoints */
1297         iface_desc = interface->cur_altsetting;
1298         for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
1299                 endpoint = &iface_desc->endpoint[i].desc;
1300                 ep_addr = endpoint->bEndpointAddress;
1301
1302                 if (usb_endpoint_is_bulk_in(endpoint)) {
1303                         if (!bulk_in_found) {
1304                                 es2->cport_in.endpoint = ep_addr;
1305                                 bulk_in_found = true;
1306                         } else if (!arpc_in_found) {
1307                                 es2->arpc_endpoint_in = ep_addr;
1308                                 arpc_in_found = true;
1309                         } else {
1310                                 dev_warn(&udev->dev,
1311                                          "Unused bulk IN endpoint found: 0x%02x\n",
1312                                          ep_addr);
1313                         }
1314                         continue;
1315                 }
1316                 if (usb_endpoint_is_bulk_out(endpoint)) {
1317                         if (!bulk_out_found) {
1318                                 es2->cport_out_endpoint = ep_addr;
1319                                 bulk_out_found = true;
1320                         } else {
1321                                 dev_warn(&udev->dev,
1322                                          "Unused bulk OUT endpoint found: 0x%02x\n",
1323                                          ep_addr);
1324                         }
1325                         continue;
1326                 }
1327                 dev_warn(&udev->dev,
1328                          "Unknown endpoint type found, address 0x%02x\n",
1329                          ep_addr);
1330         }
1331         if (!bulk_in_found || !arpc_in_found || !bulk_out_found) {
1332                 dev_err(&udev->dev, "Not enough endpoints found in device, aborting!\n");
1333                 retval = -ENODEV;
1334                 goto error;
1335         }
1336
1337         /* Allocate buffers for our cport in messages */
1338         for (i = 0; i < NUM_CPORT_IN_URB; ++i) {
1339                 struct urb *urb;
1340                 u8 *buffer;
1341
1342                 urb = usb_alloc_urb(0, GFP_KERNEL);
1343                 if (!urb) {
1344                         retval = -ENOMEM;
1345                         goto error;
1346                 }
1347                 es2->cport_in.urb[i] = urb;
1348
1349                 buffer = kmalloc(ES2_GBUF_MSG_SIZE_MAX, GFP_KERNEL);
1350                 if (!buffer) {
1351                         retval = -ENOMEM;
1352                         goto error;
1353                 }
1354
1355                 usb_fill_bulk_urb(urb, udev,
1356                                   usb_rcvbulkpipe(udev, es2->cport_in.endpoint),
1357                                   buffer, ES2_GBUF_MSG_SIZE_MAX,
1358                                   cport_in_callback, hd);
1359
1360                 es2->cport_in.buffer[i] = buffer;
1361         }
1362
1363         /* Allocate buffers for ARPC in messages */
1364         for (i = 0; i < NUM_ARPC_IN_URB; ++i) {
1365                 struct urb *urb;
1366                 u8 *buffer;
1367
1368                 urb = usb_alloc_urb(0, GFP_KERNEL);
1369                 if (!urb) {
1370                         retval = -ENOMEM;
1371                         goto error;
1372                 }
1373                 es2->arpc_urb[i] = urb;
1374
1375                 buffer = kmalloc(ARPC_IN_SIZE_MAX, GFP_KERNEL);
1376                 if (!buffer) {
1377                         retval = -ENOMEM;
1378                         goto error;
1379                 }
1380
1381                 usb_fill_bulk_urb(urb, udev,
1382                                   usb_rcvbulkpipe(udev,
1383                                                   es2->arpc_endpoint_in),
1384                                   buffer, ARPC_IN_SIZE_MAX,
1385                                   arpc_in_callback, es2);
1386
1387                 es2->arpc_buffer[i] = buffer;
1388         }
1389
1390         /* Allocate urbs for our CPort OUT messages */
1391         for (i = 0; i < NUM_CPORT_OUT_URB; ++i) {
1392                 struct urb *urb;
1393
1394                 urb = usb_alloc_urb(0, GFP_KERNEL);
1395                 if (!urb) {
1396                         retval = -ENOMEM;
1397                         goto error;
1398                 }
1399
1400                 es2->cport_out_urb[i] = urb;
1401                 es2->cport_out_urb_busy[i] = false;     /* just to be anal */
1402         }
1403
1404         /* XXX We will need to rename this per APB */
1405         es2->apb_log_enable_dentry = debugfs_create_file("apb_log_enable",
1406                                                          0644,
1407                                                          gb_debugfs_get(), es2,
1408                                                          &apb_log_enable_fops);
1409
1410         INIT_LIST_HEAD(&es2->arpcs);
1411         spin_lock_init(&es2->arpc_lock);
1412
1413         retval = es2_arpc_in_enable(es2);
1414         if (retval)
1415                 goto error;
1416
1417         retval = gb_hd_add(hd);
1418         if (retval)
1419                 goto err_disable_arpc_in;
1420
1421         retval = es2_cport_in_enable(es2, &es2->cport_in);
1422         if (retval)
1423                 goto err_hd_del;
1424
1425         return 0;
1426
1427 err_hd_del:
1428         gb_hd_del(hd);
1429 err_disable_arpc_in:
1430         es2_arpc_in_disable(es2);
1431 error:
1432         es2_destroy(es2);
1433
1434         return retval;
1435 }
1436
1437 static void ap_disconnect(struct usb_interface *interface)
1438 {
1439         struct es2_ap_dev *es2 = usb_get_intfdata(interface);
1440
1441         gb_hd_del(es2->hd);
1442
1443         es2_cport_in_disable(es2, &es2->cport_in);
1444         es2_arpc_in_disable(es2);
1445
1446         es2_destroy(es2);
1447 }
1448
1449 static struct usb_driver es2_ap_driver = {
1450         .name =         "es2_ap_driver",
1451         .probe =        ap_probe,
1452         .disconnect =   ap_disconnect,
1453         .id_table =     id_table,
1454         .soft_unbind =  1,
1455 };
1456
1457 module_usb_driver(es2_ap_driver);
1458
1459 MODULE_LICENSE("GPL v2");
1460 MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org>");