selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13
  14 sub new($$) {
  15         my ($classname, $bindir, $binary_mapping, $srcdir, $exeext, $server_maxtime) = @_;
  16         $exeext = "" unless defined($exeext);
  17         my $self = { vars => {},
  18                      bindir => $bindir,
  19                      binary_mapping => $binary_mapping,
  20                      srcdir => $srcdir,
  21                      exeext => $exeext,
  22                      server_maxtime => $server_maxtime
  23         };
  24         bless $self;
  25         return $self;
  26 }
  27
  28 sub teardown_env($$)
  29 {
  30         my ($self, $envvars) = @_;
  31
  32         my $smbdpid = read_pid($envvars, "smbd");
  33         my $nmbdpid = read_pid($envvars, "nmbd");
  34         my $winbinddpid = read_pid($envvars, "winbindd");
  35
  36         $self->stop_sig_term($smbdpid);
  37         $self->stop_sig_term($nmbdpid);
  38         $self->stop_sig_term($winbinddpid);
  39
  40         sleep(2);
  41
  42         $self->stop_sig_kill($smbdpid);
  43         $self->stop_sig_kill($nmbdpid);
  44         $self->stop_sig_kill($winbinddpid);
  45
  46         return 0;
  47 }
  48
  49 sub getlog_env_app($$$)
  50 {
  51         my ($self, $envvars, $name) = @_;
  52
  53         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
  54         my $out = $title;
  55
  56         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
  57
  58         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
  59         while (<LOG>) {
  60                 $out .= $_;
  61         }
  62         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
  63         close(LOG);
  64
  65         return "" if $out eq $title;
  66
  67         return $out;
  68 }
  69
  70 sub getlog_env($$)
  71 {
  72         my ($self, $envvars) = @_;
  73         my $ret = "";
  74
  75         $ret .= $self->getlog_env_app($envvars, "SMBD");
  76         $ret .= $self->getlog_env_app($envvars, "NMBD");
  77         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
  78
  79         return $ret;
  80 }
  81
  82 sub check_env($$)
  83 {
  84         my ($self, $envvars) = @_;
  85
  86         # TODO ...
  87         return 1;
  88 }
  89
  90 sub setup_env($$$)
  91 {
  92         my ($self, $envname, $path) = @_;
  93
  94         if ($envname eq "s3dc") {
  95                 return $self->setup_s3dc("$path/s3dc");
  96         } elsif ($envname eq "secshare") {
  97                 return $self->setup_secshare("$path/secshare");
  98         } elsif ($envname eq "ktest") {
  99                 return $self->setup_ktest("$path/ktest");
 100         } elsif ($envname eq "secserver") {
 101                 if (not defined($self->{vars}->{s3dc})) {
 102                         if (not defined($self->setup_s3dc("$path/s3dc"))) {
 103                                 return undef;
 104                         }
 105                 }
 106                 return $self->setup_secserver("$path/secserver", $self->{vars}->{s3dc});
 107         } elsif ($envname eq "member") {
 108                 if (not defined($self->{vars}->{s3dc})) {
 109                         if (not defined($self->setup_s3dc("$path/s3dc"))) {
 110                                 return undef;
 111                         }
 112                 }
 113                 return $self->setup_member("$path/member", $self->{vars}->{s3dc});
 114         } else {
 115                 return undef;
 116         }
 117 }
 118
 119 sub setup_s3dc($$)
 120 {
 121         my ($self, $path) = @_;
 122
 123         print "PROVISIONING S3DC...";
 124
 125         my $s3dc_options = "
 126         domain master = yes
 127         domain logons = yes
 128         lanman auth = yes
 129 ";
 130
 131         my $vars = $self->provision($path,
 132                                     "LOCALS3DC2",
 133                                     2,
 134                                     "locals3dc2pass",
 135                                     $s3dc_options);
 136
 137         $vars or return undef;
 138
 139         $self->check_or_start($vars,
 140                                "yes", "yes", "yes");
 141
 142         if (not $self->wait_for_start($vars)) {
 143                return undef;
 144         }
 145
 146         $vars->{DC_SERVER} = $vars->{SERVER};
 147         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 148         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 149         $vars->{DC_USERNAME} = $vars->{USERNAME};
 150         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 151
 152         $self->{vars}->{s3dc} = $vars;
 153
 154         return $vars;
 155 }
 156
 157 sub setup_member($$$)
 158 {
 159         my ($self, $prefix, $s3dcvars) = @_;
 160
 161         print "PROVISIONING MEMBER...";
 162
 163         my $member_options = "
 164         security = domain
 165         server signing = on
 166 ";
 167         my $ret = $self->provision($prefix,
 168                                    "LOCALMEMBER3",
 169                                    3,
 170                                    "localmember3pass",
 171                                    $member_options);
 172
 173         $ret or return undef;
 174
 175         my $net = Samba::bindir_path($self, "net");
 176         my $cmd = "";
 177         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 178         $cmd .= "$net join $ret->{CONFIGURATION} $s3dcvars->{DOMAIN} member";
 179         $cmd .= " -U$s3dcvars->{USERNAME}\%$s3dcvars->{PASSWORD}";
 180
 181         if (system($cmd) != 0) {
 182             warn("Join failed\n$cmd");
 183             return undef;
 184         }
 185
 186         $self->check_or_start($ret, "yes", "yes", "yes");
 187
 188         if (not $self->wait_for_start($ret)) {
 189                return undef;
 190         }
 191
 192         $ret->{DC_SERVER} = $s3dcvars->{SERVER};
 193         $ret->{DC_SERVER_IP} = $s3dcvars->{SERVER_IP};
 194         $ret->{DC_NETBIOSNAME} = $s3dcvars->{NETBIOSNAME};
 195         $ret->{DC_USERNAME} = $s3dcvars->{USERNAME};
 196         $ret->{DC_PASSWORD} = $s3dcvars->{PASSWORD};
 197
 198         return $ret;
 199 }
 200
 201 sub setup_admember($$$$)
 202 {
 203         my ($self, $prefix, $dcvars, $iface) = @_;
 204
 205         print "PROVISIONING S3 AD MEMBER$iface...";
 206
 207         my $member_options = "
 208         security = ads
 209         server signing = on
 210         workgroup = $dcvars->{DOMAIN}
 211         realm = $dcvars->{REALM}
 212 ";
 213
 214         my $ret = $self->provision($prefix,
 215                                    "LOCALADMEMBER$iface",
 216                                    $iface,
 217                                    "loCalMember${iface}Pass",
 218                                    $member_options);
 219
 220         $ret or return undef;
 221
 222         close(USERMAP);
 223         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 224         $ret->{REALM} = $dcvars->{REALM};
 225
 226         my $ctx;
 227         my $prefix_abs = abs_path($prefix);
 228         $ctx = {};
 229         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 230         $ctx->{domain} = $dcvars->{DOMAIN};
 231         $ctx->{realm} = $dcvars->{REALM};
 232         $ctx->{dnsname} = lc($dcvars->{REALM});
 233         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 234         Samba::mk_krb5_conf($ctx);
 235
 236         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 237
 238         my $net = Samba::bindir_path($self, "net");
 239         my $cmd = "";
 240         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 241         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 242         $cmd .= "$net join $ret->{CONFIGURATION}";
 243         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 244
 245         if (system($cmd) != 0) {
 246             warn("Join failed\n$cmd");
 247             return undef;
 248         }
 249
 250         # We need world access to this share, as otherwise the domain
 251         # administrator from the AD domain provided by Samba4 can't
 252         # access the share for tests.
 253         chmod 0777, "$prefix/share";
 254
 255         $self->check_or_start($ret,
 256                               "yes", "yes", "yes");
 257
 258         $self->wait_for_start($ret);
 259
 260         $ret->{DC_SERVER} = $dcvars->{SERVER};
 261         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 262         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 263         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 264         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 265
 266         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 267         $ret->{target} = $self;
 268
 269         return $ret;
 270 }
 271
 272 sub setup_plugin_s4_dc($$$$)
 273 {
 274         my ($self, $prefix, $dcvars, $iface) = @_;
 275
 276         print "PROVISIONING S4 PLUGIN AD DC$iface...";
 277
 278         my $plugin_s4_dc_options = "
 279         workgroup = $dcvars->{DOMAIN}
 280         realm = $dcvars->{REALM}
 281         security=ads
 282         passdb backend = samba4
 283         auth methods = guest samba4
 284         domain logons = yes
 285         rpc_server:lsarpc = external
 286         rpc_server:netlogon = external
 287         rpc_server:samr = external
 288         server signing = on
 289 ";
 290
 291         my $ret = $self->provision($prefix,
 292                                    "plugindc",
 293                                    $iface,
 294                                    "pluGin${iface}Pass",
 295                                    $plugin_s4_dc_options, 1);
 296
 297         $ret or return undef;
 298
 299         close(USERMAP);
 300         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 301         $ret->{REALM} = $dcvars->{REALM};
 302         $ret->{KRB5_CONFIG} = $dcvars->{KRB5_CONFIG};
 303
 304         # We need world access to this share, as otherwise the domain
 305         # administrator from the AD domain provided by Samba4 can't
 306         # access the share for tests.
 307         chmod 0777, "$prefix/share";
 308
 309         $self->check_or_start($ret,
 310                               "no", "yes", "yes");
 311
 312         $self->wait_for_start($ret);
 313
 314         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 315         $ret->{target} = $self;
 316
 317         return $ret;
 318 }
 319
 320 sub setup_secshare($$)
 321 {
 322         my ($self, $path) = @_;
 323
 324         print "PROVISIONING server with security=share...";
 325
 326         my $secshare_options = "
 327         security = share
 328         lanman auth = yes
 329 ";
 330
 331         my $vars = $self->provision($path,
 332                                     "LOCALSHARE4",
 333                                     4,
 334                                     "local4pass",
 335                                     $secshare_options);
 336
 337         $vars or return undef;
 338
 339         $self->check_or_start($vars, "yes", "no", "yes");
 340
 341         if (not $self->wait_for_start($vars)) {
 342                return undef;
 343         }
 344
 345         $self->{vars}->{secshare} = $vars;
 346
 347         return $vars;
 348 }
 349
 350 sub setup_secserver($$$)
 351 {
 352         my ($self, $prefix, $s3dcvars) = @_;
 353
 354         print "PROVISIONING server with security=server...";
 355
 356         my $secserver_options = "
 357         security = server
 358         password server = $s3dcvars->{SERVER_IP}
 359 ";
 360
 361         my $ret = $self->provision($prefix,
 362                                    "LOCALSERVER5",
 363                                    5,
 364                                    "localserver5pass",
 365                                    $secserver_options);
 366
 367         $ret or return undef;
 368
 369         $self->check_or_start($ret, "yes", "no", "yes");
 370
 371         if (not $self->wait_for_start($ret)) {
 372                return undef;
 373         }
 374
 375         $ret->{DC_SERVER} = $s3dcvars->{SERVER};
 376         $ret->{DC_SERVER_IP} = $s3dcvars->{SERVER_IP};
 377         $ret->{DC_NETBIOSNAME} = $s3dcvars->{NETBIOSNAME};
 378         $ret->{DC_USERNAME} = $s3dcvars->{USERNAME};
 379         $ret->{DC_PASSWORD} = $s3dcvars->{PASSWORD};
 380
 381         return $ret;
 382 }
 383
 384 sub setup_ktest($$$)
 385 {
 386         my ($self, $prefix) = @_;
 387
 388         print "PROVISIONING server with security=ads...";
 389
 390         my $ktest_options = "
 391         workgroup = KTEST
 392         realm = ktest.samba.example.com
 393         security = ads
 394         username map = $prefix/lib/username.map
 395 ";
 396
 397         my $ret = $self->provision($prefix,
 398                                    "LOCALKTEST6",
 399                                    6,
 400                                    "localktest6pass",
 401                                    $ktest_options);
 402
 403         $ret or return undef;
 404
 405         my $ctx;
 406         my $prefix_abs = abs_path($prefix);
 407         $ctx = {};
 408         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 409         $ctx->{domain} = "KTEST";
 410         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 411         $ctx->{dnsname} = lc($ctx->{realm});
 412         $ctx->{kdc_ipv4} = "0.0.0.0";
 413         Samba::mk_krb5_conf($ctx);
 414
 415         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 416
 417         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 418         print USERMAP "
 419 $ret->{USERNAME} = KTEST\\Administrator
 420 ";
 421         close(USERMAP);
 422
 423 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 424 #Samba4 DC with the same parameters as are being used here.  The
 425 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 426
 427         if (defined($ENV{BUILD_TDB2})) {
 428             system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb2 $prefix/private/secrets.tdb");
 429         } else {
 430             system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 431         }
 432         chmod 0600, "$prefix/private/secrets.tdb";
 433
 434 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 435 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 436 #
 437 #and having in krb5.conf:
 438 # ticket_lifetime = 799718400
 439 # renew_lifetime = 799718400
 440 #
 441 # The commands for the -2 keytab where were:
 442 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 443 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 444 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 445 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 446 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 447 #
 448 # and then for the -3 keytab, I did
 449 #
 450 # net changetrustpw; kdestroy and the same again.
 451 #
 452 # This creates a credential cache with a very long lifetime (2036 at
 453 # at 2011-04), and shows that running 'net changetrustpw' does not
 454 # break existing logins (for the secrets.tdb method at least).
 455 #
 456
 457         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
 458
 459         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
 460         chmod 0600, "$prefix/krb5_ccache-2";
 461
 462         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
 463         chmod 0600, "$prefix/krb5_ccache-3";
 464
 465         $self->check_or_start($ret, "yes", "no", "yes");
 466
 467         if (not $self->wait_for_start($ret)) {
 468                return undef;
 469         }
 470         return $ret;
 471 }
 472
 473 sub stop_sig_term($$) {
 474         my ($self, $pid) = @_;
 475         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 476 }
 477
 478 sub stop_sig_kill($$) {
 479         my ($self, $pid) = @_;
 480         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 481 }
 482
 483 sub write_pid($$$)
 484 {
 485         my ($env_vars, $app, $pid) = @_;
 486
 487         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
 488         print PID $pid;
 489         close(PID);
 490 }
 491
 492 sub read_pid($$)
 493 {
 494         my ($env_vars, $app) = @_;
 495
 496         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
 497         my $pid = <PID>;
 498         close(PID);
 499         return $pid;
 500 }
 501
 502 sub check_or_start($$$$) {
 503         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
 504
 505         unlink($env_vars->{NMBD_TEST_LOG});
 506         print "STARTING NMBD...";
 507         my $pid = fork();
 508         if ($pid == 0) {
 509                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
 510                 open STDERR, '>&STDOUT';
 511
 512                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 513
 514                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 515                 $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
 516                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 517
 518                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 519                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 520                 $ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
 521
 522                 if ($nmbd ne "yes") {
 523                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 524                                 my $signame = shift;
 525                                 print("Skip nmbd received signal $signame");
 526                                 exit 0;
 527                         };
 528                         sleep($self->{server_maxtime});
 529                         exit 0;
 530                 }
 531
 532                 my @optargs = ("-d0");
 533                 if (defined($ENV{NMBD_OPTIONS})) {
 534                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
 535                 }
 536
 537                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
 538
 539                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 540                 if(defined($ENV{NMBD_VALGRIND})) {
 541                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
 542                 }
 543
 544                 exec(@preargs, Samba::bindir_path($self, "nmbd"), "-F", "--no-process-group", "--log-stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start nmbd: $!");
 545         }
 546         write_pid($env_vars, "nmbd", $pid);
 547         print "DONE\n";
 548
 549         unlink($env_vars->{WINBINDD_TEST_LOG});
 550         print "STARTING WINBINDD...";
 551         $pid = fork();
 552         if ($pid == 0) {
 553                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
 554                 open STDERR, '>&STDOUT';
 555
 556                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 557
 558                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 559                 $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
 560                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 561
 562                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 563                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 564                 $ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
 565
 566                 if ($winbindd ne "yes") {
 567                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 568                                 my $signame = shift;
 569                                 print("Skip winbindd received signal $signame");
 570                                 exit 0;
 571                         };
 572                         sleep($self->{server_maxtime});
 573                         exit 0;
 574                 }
 575
 576                 my @optargs = ("-d0");
 577                 if (defined($ENV{WINBINDD_OPTIONS})) {
 578                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
 579                 }
 580
 581                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
 582
 583                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 584                 if(defined($ENV{WINBINDD_VALGRIND})) {
 585                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
 586                 }
 587
 588                 print "Starting winbindd with config $env_vars->{SERVERCONFFILE})\n";
 589
 590                 exec(@preargs, Samba::bindir_path($self, "winbindd"), "-F", "--no-process-group", "--stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start winbindd: $!");
 591         }
 592         write_pid($env_vars, "winbindd", $pid);
 593         print "DONE\n";
 594
 595         unlink($env_vars->{SMBD_TEST_LOG});
 596         print "STARTING SMBD...";
 597         $pid = fork();
 598         if ($pid == 0) {
 599                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
 600                 open STDERR, '>&STDOUT';
 601
 602                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 603
 604                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 605                 $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
 606                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 607
 608                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 609                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 610                 $ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
 611
 612                 if ($smbd ne "yes") {
 613                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 614                                 my $signame = shift;
 615                                 print("Skip smbd received signal $signame");
 616                                 exit 0;
 617                         };
 618                         sleep($self->{server_maxtime});
 619                         exit 0;
 620                 }
 621
 622                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
 623                 my @optargs = ("-d0");
 624                 if (defined($ENV{SMBD_OPTIONS})) {
 625                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
 626                 }
 627                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 628                 if(defined($ENV{SMBD_VALGRIND})) {
 629                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
 630                 }
 631                 exec(@preargs, Samba::bindir_path($self, "smbd"), "-F", "--no-process-group", "--log-stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start smbd: $!");
 632         }
 633         write_pid($env_vars, "smbd", $pid);
 634         print "DONE\n";
 635
 636         return 0;
 637 }
 638
 639 sub provision($$$$$$$)
 640 {
 641         my ($self, $prefix, $server, $swiface, $password, $extra_options, $no_delete_prefix) = @_;
 642
 643         ##
 644         ## setup the various environment variables we need
 645         ##
 646
 647         my %ret = ();
 648         my $server_ip = "127.0.0.$swiface";
 649         my $domain = "SAMBA-TEST";
 650
 651         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
 652         chomp $unix_name;
 653         my $unix_uid = $>;
 654         my $unix_gids_str = $);
 655         my @unix_gids = split(" ", $unix_gids_str);
 656
 657         my $prefix_abs = abs_path($prefix);
 658         my $bindir_abs = abs_path($self->{bindir});
 659         my $vfs_modulesdir_abs = ($ENV{VFSLIBDIR} or $bindir_abs);
 660
 661         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
 662
 663         my @dirs = ();
 664
 665         my $shrdir="$prefix_abs/share";
 666         push(@dirs,$shrdir);
 667
 668         my $libdir="$prefix_abs/lib";
 669         push(@dirs,$libdir);
 670
 671         my $piddir="$prefix_abs/pid";
 672         push(@dirs,$piddir);
 673
 674         my $privatedir="$prefix_abs/private";
 675         push(@dirs,$privatedir);
 676
 677         my $lockdir="$prefix_abs/lockdir";
 678         push(@dirs,$lockdir);
 679
 680         my $eventlogdir="$prefix_abs/lockdir/eventlog";
 681         push(@dirs,$eventlogdir);
 682
 683         my $logdir="$prefix_abs/logs";
 684         push(@dirs,$logdir);
 685
 686         my $driver32dir="$shrdir/W32X86";
 687         push(@dirs,$driver32dir);
 688
 689         my $driver64dir="$shrdir/x64";
 690         push(@dirs,$driver64dir);
 691
 692         my $driver40dir="$shrdir/WIN40";
 693         push(@dirs,$driver40dir);
 694
 695         my $ro_shrdir="$shrdir/root-tmp";
 696         push(@dirs,$ro_shrdir);
 697
 698         my $msdfs_shrdir="$shrdir/msdfsshare";
 699         push(@dirs,$msdfs_shrdir);
 700
 701         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
 702         push(@dirs,$msdfs_deeppath);
 703
 704         # this gets autocreated by winbindd
 705         my $wbsockdir="$prefix_abs/winbindd";
 706         my $wbsockprivdir="$lockdir/winbindd_privileged";
 707
 708         my $nmbdsockdir="$prefix_abs/nmbd";
 709         unlink($nmbdsockdir);
 710
 711         ##
 712         ## create the test directory layout
 713         ##
 714         die ("prefix_abs = ''") if $prefix_abs eq "";
 715         die ("prefix_abs = '/'") if $prefix_abs eq "/";
 716
 717         mkdir($prefix_abs, 0777);
 718         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
 719         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
 720             system("rm -rf $prefix_abs/*");
 721         }
 722         mkdir($_, 0777) foreach(@dirs);
 723
 724         ##
 725         ## create ro and msdfs share layout
 726         ##
 727
 728         chmod 0755, $ro_shrdir;
 729         my $unreadable_file = "$ro_shrdir/unreadable_file";
 730         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
 731                 warn("Unable to open $unreadable_file");
 732                 return undef;
 733         }
 734         close(UNREADABLE_FILE);
 735         chmod 0600, $unreadable_file;
 736
 737         my $msdfs_target = "$ro_shrdir/msdfs-target";
 738         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
 739                 warn("Unable to open $msdfs_target");
 740                 return undef;
 741         }
 742         close(MSDFS_TARGET);
 743         chmod 0666, $msdfs_target;
 744         symlink "msdfs:$server_ip\\ro-tmp", "$msdfs_shrdir/msdfs-src1";
 745         symlink "msdfs:$server_ip\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
 746
 747         my $conffile="$libdir/server.conf";
 748
 749         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
 750         my $nss_wrapper_passwd = "$privatedir/passwd";
 751         my $nss_wrapper_group = "$privatedir/group";
 752
 753         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
 754
 755         my @eventlog_list = ("dns server", "application");
 756
 757         ##
 758         ## calculate uids and gids
 759         ##
 760
 761         my ($max_uid, $max_gid);
 762         my ($uid_nobody, $uid_root);
 763         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers);
 764
 765         if ($unix_uid < 0xffff - 2) {
 766                 $max_uid = 0xffff;
 767         } else {
 768                 $max_uid = $unix_uid;
 769         }
 770
 771         $uid_root = $max_uid - 1;
 772         $uid_nobody = $max_uid - 2;
 773
 774         if ($unix_gids[0] < 0xffff - 3) {
 775                 $max_gid = 0xffff;
 776         } else {
 777                 $max_gid = $unix_gids[0];
 778         }
 779
 780         $gid_nobody = $max_gid - 1;
 781         $gid_nogroup = $max_gid - 2;
 782         $gid_root = $max_gid - 3;
 783         $gid_domusers = $max_gid - 4;
 784
 785         ##
 786         ## create conffile
 787         ##
 788
 789         unless (open(CONF, ">$conffile")) {
 790                 warn("Unable to open $conffile");
 791                 return undef;
 792         }
 793         print CONF "
 794 [global]
 795         netbios name = $server
 796         interfaces = $server_ip/8
 797         bind interfaces only = yes
 798         panic action = $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
 799
 800         workgroup = $domain
 801
 802         private dir = $privatedir
 803         pid directory = $piddir
 804         lock directory = $lockdir
 805         log file = $logdir/log.\%m
 806         log level = 0
 807         debug pid = yes
 808         max log size = 0
 809
 810         state directory = $lockdir
 811         cache directory = $lockdir
 812
 813         passdb backend = tdbsam
 814
 815         time server = yes
 816
 817         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
 818         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
 819         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
 820         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
 821         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
 822         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
 823         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
 824
 825         addprinter command =            $mod_printer_pl -a -s $conffile --
 826         deleteprinter command =         $mod_printer_pl -d -s $conffile --
 827
 828         eventlog list = application \"dns server\"
 829
 830         kernel oplocks = no
 831         kernel change notify = no
 832
 833         syslog = no
 834         printing = bsd
 835         printcap name = /dev/null
 836
 837         winbindd:socket dir = $wbsockdir
 838         nmbd:socket dir = $nmbdsockdir
 839         idmap config * : range = 100000-200000
 840         winbind enum users = yes
 841         winbind enum groups = yes
 842
 843 #       min receivefile size = 4000
 844
 845         max protocol = SMB2
 846         read only = no
 847         server signing = auto
 848
 849         smbd:sharedelay = 100000
 850 #       smbd:writetimeupdatedelay = 500000
 851         map hidden = no
 852         map system = no
 853         map readonly = no
 854         store dos attributes = yes
 855         create mask = 755
 856         vfs objects = $vfs_modulesdir_abs/xattr_tdb.so $vfs_modulesdir_abs/streams_depot.so
 857
 858         printing = vlp
 859         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
 860         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
 861         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
 862         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
 863         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
 864         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
 865         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
 866         lpq cache time = 0
 867
 868         ncalrpc dir = $prefix_abs/ncalrpc
 869         rpc_server:epmapper = embedded
 870
 871         resolv:host file = $dns_host_file
 872
 873         message command = mv %s $shrdir/message.%m
 874
 875         # Begin extra options
 876         $extra_options
 877         # End extra options
 878
 879         #Include user defined custom parameters if set
 880 ";
 881
 882         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
 883                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
 884         }
 885
 886         print CONF "
 887 [tmp]
 888         path = $shrdir
 889 [tmpguest]
 890         path = $shrdir
 891         guest ok = yes
 892 [guestonly]
 893         path = $shrdir
 894         guest only = yes
 895         guest ok = yes
 896 [forceuser]
 897         path = $shrdir
 898         force user = $unix_name
 899         guest ok = yes
 900 [forcegroup]
 901         path = $shrdir
 902         force group = nogroup
 903         guest ok = yes
 904 [ro-tmp]
 905         path = $ro_shrdir
 906         guest ok = yes
 907 [msdfs-share]
 908         path = $msdfs_shrdir
 909         msdfs root = yes
 910         guest ok = yes
 911 [hideunread]
 912         copy = tmp
 913         hide unreadable = yes
 914 [tmpcase]
 915         copy = tmp
 916         case sensitive = yes
 917 [hideunwrite]
 918         copy = tmp
 919         hide unwriteable files = yes
 920 [print1]
 921         copy = tmp
 922         printable = yes
 923
 924 [print2]
 925         copy = print1
 926 [print3]
 927         copy = print1
 928 [lp]
 929         copy = print1
 930 [print\$]
 931         copy = tmp
 932         ";
 933         close(CONF);
 934
 935         ##
 936         ## create a test account
 937         ##
 938
 939         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
 940            warn("Unable to open $nss_wrapper_passwd");
 941            return undef;
 942         }
 943         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
 944 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
 945 ";
 946         if ($unix_uid != 0) {
 947                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false";
 948         }
 949         close(PASSWD);
 950
 951         unless (open(GROUP, ">$nss_wrapper_group")) {
 952              warn("Unable to open $nss_wrapper_group");
 953              return undef;
 954         }
 955         print GROUP "nobody:x:$gid_nobody:
 956 nogroup:x:$gid_nogroup:nobody
 957 $unix_name-group:x:$unix_gids[0]:
 958 domusers:X:$gid_domusers:
 959 ";
 960         if ($unix_gids[0] != 0) {
 961                 print GROUP "root:x:$gid_root:";
 962         }
 963
 964         close(GROUP);
 965
 966         foreach my $evlog (@eventlog_list) {
 967                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
 968                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
 969                 close(EVENTLOG);
 970         }
 971
 972         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
 973         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
 974
 975         my $cmd = Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
 976         unless (open(PWD, "|$cmd")) {
 977              warn("Unable to set password for test account\n$cmd");
 978              return undef;
 979         }
 980         print PWD "$password\n$password\n";
 981         unless (close(PWD)) {
 982              warn("Unable to set password for test account\n$cmd");
 983              return undef;
 984         }
 985         print "DONE\n";
 986
 987         open(HOSTS, ">>$ENV{SELFTEST_PREFIX}/dns_host_file") or die("Unable to open $ENV{SELFTEST_PREFIX}/dns_host_file");
 988         print HOSTS "A $server. $server_ip
 989 ";
 990         close(HOSTS);
 991
 992         $ret{SERVER_IP} = $server_ip;
 993         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
 994         $ret{NMBD_TEST_LOG_POS} = 0;
 995         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
 996         $ret{WINBINDD_TEST_LOG_POS} = 0;
 997         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
 998         $ret{SMBD_TEST_LOG_POS} = 0;
 999         $ret{SERVERCONFFILE} = $conffile;
1000         $ret{CONFIGURATION} ="-s $conffile";
1001         $ret{SERVER} = $server;
1002         $ret{USERNAME} = $unix_name;
1003         $ret{USERID} = $unix_uid;
1004         $ret{DOMAIN} = $domain;
1005         $ret{NETBIOSNAME} = $server;
1006         $ret{PASSWORD} = $password;
1007         $ret{PIDDIR} = $piddir;
1008         $ret{WINBINDD_SOCKET_DIR} = $wbsockdir;
1009         $ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
1010         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
1011         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
1012         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1013         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1014         $ret{NSS_WRAPPER_WINBIND_SO_PATH} = $ENV{NSS_WRAPPER_WINBIND_SO_PATH};
1015         if (not defined($ret{NSS_WRAPPER_WINBIND_SO_PATH})) {
1016                 $ret{NSS_WRAPPER_WINBIND_SO_PATH} = Samba::bindir_path($self, "default/nsswitch/libnss-winbind.so");
1017         }
1018         $ret{LOCAL_PATH} = "$shrdir";
1019
1020         return \%ret;
1021 }
1022
1023 sub wait_for_start($$)
1024 {
1025         my ($self, $envvars) = @_;
1026
1027         # give time for nbt server to register its names
1028         print "delaying for nbt name registration\n";
1029         sleep(10);
1030         # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
1031         system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
1032         system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} __SAMBA__");
1033         system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
1034         system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
1035         system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} $envvars->{SERVER}");
1036
1037         # make sure smbd is also up set
1038         print "wait for smbd\n";
1039
1040         my $count = 0;
1041         my $ret;
1042         do {
1043             $ret = system(Samba::bindir_path($self, "smbclient3") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
1044             if ($ret != 0) {
1045                 sleep(2);
1046             }
1047             $count++
1048         } while ($ret != 0 && $count < 10);
1049         if ($count == 10) {
1050             print "SMBD failed to start up in a reasonable time (20sec)\n";
1051             teardown_env($self, $envvars);
1052             return 0;
1053         }
1054         # Ensure we have domain users mapped.
1055         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
1056         if ($ret != 0) {
1057             return 1;
1058         }
1059
1060         print $self->getlog_env($envvars);
1061
1062         return 1;
1063 }
1064
1065 1;