selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13
  14 sub new($$) {
  15         my ($classname, $bindir, $binary_mapping, $srcdir, $exeext, $server_maxtime) = @_;
  16         $exeext = "" unless defined($exeext);
  17         my $self = { vars => {},
  18                      bindir => $bindir,
  19                      binary_mapping => $binary_mapping,
  20                      srcdir => $srcdir,
  21                      exeext => $exeext,
  22                      server_maxtime => $server_maxtime
  23         };
  24         bless $self;
  25         return $self;
  26 }
  27
  28 sub teardown_env($$)
  29 {
  30         my ($self, $envvars) = @_;
  31
  32         my $smbdpid = read_pid($envvars, "smbd");
  33         my $nmbdpid = read_pid($envvars, "nmbd");
  34         my $winbinddpid = read_pid($envvars, "winbindd");
  35
  36         $self->stop_sig_term($smbdpid);
  37         $self->stop_sig_term($nmbdpid);
  38         $self->stop_sig_term($winbinddpid);
  39
  40         sleep(2);
  41
  42         $self->stop_sig_kill($smbdpid);
  43         $self->stop_sig_kill($nmbdpid);
  44         $self->stop_sig_kill($winbinddpid);
  45
  46         return 0;
  47 }
  48
  49 sub getlog_env_app($$$)
  50 {
  51         my ($self, $envvars, $name) = @_;
  52
  53         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
  54         my $out = $title;
  55
  56         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
  57
  58         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
  59         while (<LOG>) {
  60                 $out .= $_;
  61         }
  62         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
  63         close(LOG);
  64
  65         return "" if $out eq $title;
  66
  67         return $out;
  68 }
  69
  70 sub getlog_env($$)
  71 {
  72         my ($self, $envvars) = @_;
  73         my $ret = "";
  74
  75         $ret .= $self->getlog_env_app($envvars, "SMBD");
  76         $ret .= $self->getlog_env_app($envvars, "NMBD");
  77         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
  78
  79         return $ret;
  80 }
  81
  82 sub check_env($$)
  83 {
  84         my ($self, $envvars) = @_;
  85
  86         # TODO ...
  87         return 1;
  88 }
  89
  90 sub setup_env($$$)
  91 {
  92         my ($self, $envname, $path) = @_;
  93
  94         if ($envname eq "s3dc") {
  95                 return $self->setup_s3dc("$path/s3dc");
  96         } elsif ($envname eq "secshare") {
  97                 return $self->setup_secshare("$path/secshare");
  98         } elsif ($envname eq "ktest") {
  99                 return $self->setup_ktest("$path/ktest");
 100         } elsif ($envname eq "secserver") {
 101                 if (not defined($self->{vars}->{s3dc})) {
 102                         if (not defined($self->setup_s3dc("$path/s3dc"))) {
 103                                 return undef;
 104                         }
 105                 }
 106                 return $self->setup_secserver("$path/secserver", $self->{vars}->{s3dc});
 107         } elsif ($envname eq "member") {
 108                 if (not defined($self->{vars}->{s3dc})) {
 109                         if (not defined($self->setup_s3dc("$path/s3dc"))) {
 110                                 return undef;
 111                         }
 112                 }
 113                 return $self->setup_member("$path/member", $self->{vars}->{s3dc});
 114         } else {
 115                 return undef;
 116         }
 117 }
 118
 119 sub setup_s3dc($$)
 120 {
 121         my ($self, $path) = @_;
 122
 123         print "PROVISIONING S3DC...";
 124
 125         my $s3dc_options = "
 126         domain master = yes
 127         domain logons = yes
 128         lanman auth = yes
 129 ";
 130
 131         my $vars = $self->provision($path,
 132                                     "LOCALS3DC2",
 133                                     2,
 134                                     "locals3dc2pass",
 135                                     $s3dc_options);
 136
 137         $vars or return undef;
 138
 139         $self->check_or_start($vars,
 140                                "yes", "yes", "yes");
 141
 142         if (not $self->wait_for_start($vars)) {
 143                return undef;
 144         }
 145
 146         $vars->{DC_SERVER} = $vars->{SERVER};
 147         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 148         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 149         $vars->{DC_USERNAME} = $vars->{USERNAME};
 150         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 151
 152         $self->{vars}->{s3dc} = $vars;
 153
 154         return $vars;
 155 }
 156
 157 sub setup_member($$$)
 158 {
 159         my ($self, $prefix, $s3dcvars) = @_;
 160
 161         print "PROVISIONING MEMBER...";
 162
 163         my $member_options = "
 164         security = domain
 165         server signing = on
 166 ";
 167         my $ret = $self->provision($prefix,
 168                                    "LOCALMEMBER3",
 169                                    3,
 170                                    "localmember3pass",
 171                                    $member_options);
 172
 173         $ret or return undef;
 174
 175         my $net = Samba::bindir_path($self, "net");
 176         my $cmd = "";
 177         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 178         $cmd .= "$net join $ret->{CONFIGURATION} $s3dcvars->{DOMAIN} member";
 179         $cmd .= " -U$s3dcvars->{USERNAME}\%$s3dcvars->{PASSWORD}";
 180
 181         if (system($cmd) != 0) {
 182             warn("Join failed\n$cmd");
 183             return undef;
 184         }
 185
 186         $self->check_or_start($ret, "yes", "yes", "yes");
 187
 188         if (not $self->wait_for_start($ret)) {
 189                return undef;
 190         }
 191
 192         $ret->{DC_SERVER} = $s3dcvars->{SERVER};
 193         $ret->{DC_SERVER_IP} = $s3dcvars->{SERVER_IP};
 194         $ret->{DC_NETBIOSNAME} = $s3dcvars->{NETBIOSNAME};
 195         $ret->{DC_USERNAME} = $s3dcvars->{USERNAME};
 196         $ret->{DC_PASSWORD} = $s3dcvars->{PASSWORD};
 197
 198         return $ret;
 199 }
 200
 201 sub setup_admember($$$$)
 202 {
 203         my ($self, $prefix, $dcvars, $iface) = @_;
 204
 205         print "PROVISIONING S3 AD MEMBER$iface...";
 206
 207         my $member_options = "
 208         security = ads
 209         server signing = on
 210         workgroup = $dcvars->{DOMAIN}
 211         realm = $dcvars->{REALM}
 212 ";
 213
 214         my $ret = $self->provision($prefix,
 215                                    "LOCALADMEMBER$iface",
 216                                    $iface,
 217                                    "loCalMember${iface}Pass",
 218                                    $member_options);
 219
 220         $ret or return undef;
 221
 222         close(USERMAP);
 223         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 224         $ret->{REALM} = $dcvars->{REALM};
 225
 226         my $ctx;
 227         my $prefix_abs = abs_path($prefix);
 228         $ctx = {};
 229         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 230         $ctx->{domain} = $dcvars->{DOMAIN};
 231         $ctx->{realm} = $dcvars->{REALM};
 232         $ctx->{dnsname} = lc($dcvars->{REALM});
 233         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 234         Samba::mk_krb5_conf($ctx);
 235
 236         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 237
 238         my $net = Samba::bindir_path($self, "net");
 239         my $cmd = "";
 240         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 241         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 242         $cmd .= "$net join $ret->{CONFIGURATION}";
 243         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 244
 245         if (system($cmd) != 0) {
 246             warn("Join failed\n$cmd");
 247             return undef;
 248         }
 249
 250         # We need world access to this share, as otherwise the domain
 251         # administrator from the AD domain provided by Samba4 can't
 252         # access the share for tests.
 253         chmod 0777, "$prefix/share";
 254
 255         $self->check_or_start($ret,
 256                               "yes", "yes", "yes");
 257
 258         $self->wait_for_start($ret);
 259
 260         $ret->{DC_SERVER} = $dcvars->{SERVER};
 261         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 262         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 263         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 264         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 265
 266         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 267         $ret->{target} = $self;
 268
 269         return $ret;
 270 }
 271
 272 sub setup_plugin_s4_dc($$$$)
 273 {
 274         my ($self, $prefix, $dcvars, $iface) = @_;
 275
 276         print "PROVISIONING S4 PLUGIN AD DC$iface...";
 277
 278         my $plugin_s4_dc_options = "
 279         workgroup = $dcvars->{DOMAIN}
 280         realm = $dcvars->{REALM}
 281         security=ads
 282         passdb backend = samba4
 283         auth methods = guest samba4
 284         domain logons = yes
 285         rpc_server:lsarpc = external
 286         rpc_server:netlogon = external
 287         rpc_server:samr = external
 288         server signing = on
 289 ";
 290
 291         my $ret = $self->provision($prefix,
 292                                    "plugindc",
 293                                    $iface,
 294                                    "pluGin${iface}Pass",
 295                                    $plugin_s4_dc_options, 1);
 296
 297         $ret or return undef;
 298
 299         close(USERMAP);
 300         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 301         $ret->{REALM} = $dcvars->{REALM};
 302         $ret->{KRB5_CONFIG} = $dcvars->{KRB5_CONFIG};
 303
 304         # We need world access to this share, as otherwise the domain
 305         # administrator from the AD domain provided by Samba4 can't
 306         # access the share for tests.
 307         chmod 0777, "$prefix/share";
 308
 309         $self->check_or_start($ret,
 310                               "no", "yes", "yes");
 311
 312         $self->wait_for_start($ret);
 313
 314         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 315         $ret->{target} = $self;
 316
 317         return $ret;
 318 }
 319
 320 sub setup_secshare($$)
 321 {
 322         my ($self, $path) = @_;
 323
 324         print "PROVISIONING server with security=share...";
 325
 326         my $secshare_options = "
 327         security = share
 328         lanman auth = yes
 329 ";
 330
 331         my $vars = $self->provision($path,
 332                                     "LOCALSHARE4",
 333                                     4,
 334                                     "local4pass",
 335                                     $secshare_options);
 336
 337         $vars or return undef;
 338
 339         $self->check_or_start($vars, "yes", "no", "yes");
 340
 341         if (not $self->wait_for_start($vars)) {
 342                return undef;
 343         }
 344
 345         $self->{vars}->{secshare} = $vars;
 346
 347         return $vars;
 348 }
 349
 350 sub setup_secserver($$$)
 351 {
 352         my ($self, $prefix, $s3dcvars) = @_;
 353
 354         print "PROVISIONING server with security=server...";
 355
 356         my $secserver_options = "
 357         security = server
 358         password server = $s3dcvars->{SERVER_IP}
 359 ";
 360
 361         my $ret = $self->provision($prefix,
 362                                    "LOCALSERVER5",
 363                                    5,
 364                                    "localserver5pass",
 365                                    $secserver_options);
 366
 367         $ret or return undef;
 368
 369         $self->check_or_start($ret, "yes", "no", "yes");
 370
 371         if (not $self->wait_for_start($ret)) {
 372                return undef;
 373         }
 374
 375         $ret->{DC_SERVER} = $s3dcvars->{SERVER};
 376         $ret->{DC_SERVER_IP} = $s3dcvars->{SERVER_IP};
 377         $ret->{DC_NETBIOSNAME} = $s3dcvars->{NETBIOSNAME};
 378         $ret->{DC_USERNAME} = $s3dcvars->{USERNAME};
 379         $ret->{DC_PASSWORD} = $s3dcvars->{PASSWORD};
 380
 381         return $ret;
 382 }
 383
 384 sub setup_ktest($$$)
 385 {
 386         my ($self, $prefix) = @_;
 387
 388         print "PROVISIONING server with security=ads...";
 389
 390         my $ktest_options = "
 391         workgroup = KTEST
 392         realm = ktest.samba.example.com
 393         security = ads
 394         username map = $prefix/lib/username.map
 395 ";
 396
 397         my $ret = $self->provision($prefix,
 398                                    "LOCALKTEST6",
 399                                    6,
 400                                    "localktest6pass",
 401                                    $ktest_options);
 402
 403         $ret or return undef;
 404
 405         my $ctx;
 406         my $prefix_abs = abs_path($prefix);
 407         $ctx = {};
 408         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 409         $ctx->{domain} = "KTEST";
 410         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 411         $ctx->{dnsname} = lc($ctx->{realm});
 412         $ctx->{kdc_ipv4} = "0.0.0.0";
 413         Samba::mk_krb5_conf($ctx);
 414
 415         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 416
 417         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 418         print USERMAP "
 419 $ret->{USERNAME} = KTEST\\Administrator
 420 ";
 421         close(USERMAP);
 422
 423 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 424 #Samba4 DC with the same parameters as are being used here.  The
 425 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 426
 427         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 428         chmod 0600, "$prefix/private/secrets.tdb";
 429
 430 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 431 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 432 #
 433 #and having in krb5.conf:
 434 # ticket_lifetime = 799718400
 435 # renew_lifetime = 799718400
 436 #
 437 # The commands for the -2 keytab where were:
 438 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 439 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 440 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 441 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 442 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 443 #
 444 # and then for the -3 keytab, I did
 445 #
 446 # net changetrustpw; kdestroy and the same again.
 447 #
 448 # This creates a credential cache with a very long lifetime (2036 at
 449 # at 2011-04), and shows that running 'net changetrustpw' does not
 450 # break existing logins (for the secrets.tdb method at least).
 451 #
 452
 453         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
 454
 455         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
 456         chmod 0600, "$prefix/krb5_ccache-2";
 457
 458         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
 459         chmod 0600, "$prefix/krb5_ccache-3";
 460
 461         $self->check_or_start($ret, "yes", "no", "yes");
 462
 463         if (not $self->wait_for_start($ret)) {
 464                return undef;
 465         }
 466         return $ret;
 467 }
 468
 469 sub stop_sig_term($$) {
 470         my ($self, $pid) = @_;
 471         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 472 }
 473
 474 sub stop_sig_kill($$) {
 475         my ($self, $pid) = @_;
 476         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 477 }
 478
 479 sub write_pid($$$)
 480 {
 481         my ($env_vars, $app, $pid) = @_;
 482
 483         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
 484         print PID $pid;
 485         close(PID);
 486 }
 487
 488 sub read_pid($$)
 489 {
 490         my ($env_vars, $app) = @_;
 491
 492         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
 493         my $pid = <PID>;
 494         close(PID);
 495         return $pid;
 496 }
 497
 498 sub check_or_start($$$$) {
 499         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
 500
 501         unlink($env_vars->{NMBD_TEST_LOG});
 502         print "STARTING NMBD...";
 503         my $pid = fork();
 504         if ($pid == 0) {
 505                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
 506                 open STDERR, '>&STDOUT';
 507
 508                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 509
 510                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 511                 $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
 512                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 513
 514                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 515                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 516                 $ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
 517
 518                 if ($nmbd ne "yes") {
 519                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 520                                 my $signame = shift;
 521                                 print("Skip nmbd received signal $signame");
 522                                 exit 0;
 523                         };
 524                         sleep($self->{server_maxtime});
 525                         exit 0;
 526                 }
 527
 528                 my @optargs = ("-d0");
 529                 if (defined($ENV{NMBD_OPTIONS})) {
 530                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
 531                 }
 532
 533                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
 534
 535                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 536                 if(defined($ENV{NMBD_VALGRIND})) {
 537                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
 538                 }
 539
 540                 exec(@preargs, Samba::bindir_path($self, "nmbd"), "-F", "--no-process-group", "--log-stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start nmbd: $!");
 541         }
 542         write_pid($env_vars, "nmbd", $pid);
 543         print "DONE\n";
 544
 545         unlink($env_vars->{WINBINDD_TEST_LOG});
 546         print "STARTING WINBINDD...";
 547         $pid = fork();
 548         if ($pid == 0) {
 549                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
 550                 open STDERR, '>&STDOUT';
 551
 552                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 553
 554                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 555                 $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
 556                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 557
 558                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 559                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 560                 $ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
 561
 562                 if ($winbindd ne "yes") {
 563                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 564                                 my $signame = shift;
 565                                 print("Skip winbindd received signal $signame");
 566                                 exit 0;
 567                         };
 568                         sleep($self->{server_maxtime});
 569                         exit 0;
 570                 }
 571
 572                 my @optargs = ("-d0");
 573                 if (defined($ENV{WINBINDD_OPTIONS})) {
 574                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
 575                 }
 576
 577                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
 578
 579                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 580                 if(defined($ENV{WINBINDD_VALGRIND})) {
 581                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
 582                 }
 583
 584                 print "Starting winbindd with config $env_vars->{SERVERCONFFILE})\n";
 585
 586                 exec(@preargs, Samba::bindir_path($self, "winbindd"), "-F", "--no-process-group", "--stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start winbindd: $!");
 587         }
 588         write_pid($env_vars, "winbindd", $pid);
 589         print "DONE\n";
 590
 591         unlink($env_vars->{SMBD_TEST_LOG});
 592         print "STARTING SMBD...";
 593         $pid = fork();
 594         if ($pid == 0) {
 595                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
 596                 open STDERR, '>&STDOUT';
 597
 598                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 599
 600                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 601                 $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
 602                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 603
 604                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 605                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 606                 $ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
 607
 608                 if ($smbd ne "yes") {
 609                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 610                                 my $signame = shift;
 611                                 print("Skip smbd received signal $signame");
 612                                 exit 0;
 613                         };
 614                         sleep($self->{server_maxtime});
 615                         exit 0;
 616                 }
 617
 618                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
 619                 my @optargs = ("-d0");
 620                 if (defined($ENV{SMBD_OPTIONS})) {
 621                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
 622                 }
 623                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 624                 if(defined($ENV{SMBD_VALGRIND})) {
 625                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
 626                 }
 627                 exec(@preargs, Samba::bindir_path($self, "smbd"), "-F", "--no-process-group", "--log-stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start smbd: $!");
 628         }
 629         write_pid($env_vars, "smbd", $pid);
 630         print "DONE\n";
 631
 632         return 0;
 633 }
 634
 635 sub provision($$$$$$$)
 636 {
 637         my ($self, $prefix, $server, $swiface, $password, $extra_options, $no_delete_prefix) = @_;
 638
 639         ##
 640         ## setup the various environment variables we need
 641         ##
 642
 643         my %ret = ();
 644         my $server_ip = "127.0.0.$swiface";
 645         my $domain = "SAMBA-TEST";
 646
 647         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
 648         chomp $unix_name;
 649         my $unix_uid = $>;
 650         my $unix_gids_str = $);
 651         my @unix_gids = split(" ", $unix_gids_str);
 652
 653         my $prefix_abs = abs_path($prefix);
 654         my $bindir_abs = abs_path($self->{bindir});
 655         my $vfs_modulesdir_abs = ($ENV{VFSLIBDIR} or $bindir_abs);
 656
 657         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
 658
 659         my @dirs = ();
 660
 661         my $shrdir="$prefix_abs/share";
 662         push(@dirs,$shrdir);
 663
 664         my $libdir="$prefix_abs/lib";
 665         push(@dirs,$libdir);
 666
 667         my $piddir="$prefix_abs/pid";
 668         push(@dirs,$piddir);
 669
 670         my $privatedir="$prefix_abs/private";
 671         push(@dirs,$privatedir);
 672
 673         my $lockdir="$prefix_abs/lockdir";
 674         push(@dirs,$lockdir);
 675
 676         my $eventlogdir="$prefix_abs/lockdir/eventlog";
 677         push(@dirs,$eventlogdir);
 678
 679         my $logdir="$prefix_abs/logs";
 680         push(@dirs,$logdir);
 681
 682         my $driver32dir="$shrdir/W32X86";
 683         push(@dirs,$driver32dir);
 684
 685         my $driver64dir="$shrdir/x64";
 686         push(@dirs,$driver64dir);
 687
 688         my $driver40dir="$shrdir/WIN40";
 689         push(@dirs,$driver40dir);
 690
 691         my $ro_shrdir="$shrdir/root-tmp";
 692         push(@dirs,$ro_shrdir);
 693
 694         my $msdfs_shrdir="$shrdir/msdfsshare";
 695         push(@dirs,$msdfs_shrdir);
 696
 697         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
 698         push(@dirs,$msdfs_deeppath);
 699
 700         # this gets autocreated by winbindd
 701         my $wbsockdir="$prefix_abs/winbindd";
 702         my $wbsockprivdir="$lockdir/winbindd_privileged";
 703
 704         my $nmbdsockdir="$prefix_abs/nmbd";
 705         unlink($nmbdsockdir);
 706
 707         ##
 708         ## create the test directory layout
 709         ##
 710         die ("prefix_abs = ''") if $prefix_abs eq "";
 711         die ("prefix_abs = '/'") if $prefix_abs eq "/";
 712
 713         mkdir($prefix_abs, 0777);
 714         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
 715         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
 716             system("rm -rf $prefix_abs/*");
 717         }
 718         mkdir($_, 0777) foreach(@dirs);
 719
 720         ##
 721         ## create ro and msdfs share layout
 722         ##
 723
 724         chmod 0755, $ro_shrdir;
 725         my $unreadable_file = "$ro_shrdir/unreadable_file";
 726         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
 727                 warn("Unable to open $unreadable_file");
 728                 return undef;
 729         }
 730         close(UNREADABLE_FILE);
 731         chmod 0600, $unreadable_file;
 732
 733         my $msdfs_target = "$ro_shrdir/msdfs-target";
 734         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
 735                 warn("Unable to open $msdfs_target");
 736                 return undef;
 737         }
 738         close(MSDFS_TARGET);
 739         chmod 0666, $msdfs_target;
 740         symlink "msdfs:$server_ip\\ro-tmp", "$msdfs_shrdir/msdfs-src1";
 741         symlink "msdfs:$server_ip\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
 742
 743         my $conffile="$libdir/server.conf";
 744
 745         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
 746         my $nss_wrapper_passwd = "$privatedir/passwd";
 747         my $nss_wrapper_group = "$privatedir/group";
 748
 749         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
 750
 751         my @eventlog_list = ("dns server", "application");
 752
 753         ##
 754         ## calculate uids and gids
 755         ##
 756
 757         my ($max_uid, $max_gid);
 758         my ($uid_nobody, $uid_root);
 759         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers);
 760
 761         if ($unix_uid < 0xffff - 2) {
 762                 $max_uid = 0xffff;
 763         } else {
 764                 $max_uid = $unix_uid;
 765         }
 766
 767         $uid_root = $max_uid - 1;
 768         $uid_nobody = $max_uid - 2;
 769
 770         if ($unix_gids[0] < 0xffff - 3) {
 771                 $max_gid = 0xffff;
 772         } else {
 773                 $max_gid = $unix_gids[0];
 774         }
 775
 776         $gid_nobody = $max_gid - 1;
 777         $gid_nogroup = $max_gid - 2;
 778         $gid_root = $max_gid - 3;
 779         $gid_domusers = $max_gid - 4;
 780
 781         ##
 782         ## create conffile
 783         ##
 784
 785         unless (open(CONF, ">$conffile")) {
 786                 warn("Unable to open $conffile");
 787                 return undef;
 788         }
 789         print CONF "
 790 [global]
 791         netbios name = $server
 792         interfaces = $server_ip/8
 793         bind interfaces only = yes
 794         panic action = $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
 795
 796         workgroup = $domain
 797
 798         private dir = $privatedir
 799         pid directory = $piddir
 800         lock directory = $lockdir
 801         log file = $logdir/log.\%m
 802         log level = 0
 803         debug pid = yes
 804         max log size = 0
 805
 806         state directory = $lockdir
 807         cache directory = $lockdir
 808
 809         passdb backend = tdbsam
 810
 811         time server = yes
 812
 813         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
 814         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
 815         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
 816         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
 817         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
 818         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
 819         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
 820
 821         addprinter command =            $mod_printer_pl -a -s $conffile --
 822         deleteprinter command =         $mod_printer_pl -d -s $conffile --
 823
 824         eventlog list = application \"dns server\"
 825
 826         kernel oplocks = no
 827         kernel change notify = no
 828
 829         syslog = no
 830         printing = bsd
 831         printcap name = /dev/null
 832
 833         winbindd:socket dir = $wbsockdir
 834         nmbd:socket dir = $nmbdsockdir
 835         idmap config * : range = 100000-200000
 836         winbind enum users = yes
 837         winbind enum groups = yes
 838
 839 #       min receivefile size = 4000
 840
 841         max protocol = SMB2
 842         read only = no
 843         server signing = auto
 844
 845         smbd:sharedelay = 100000
 846 #       smbd:writetimeupdatedelay = 500000
 847         map hidden = no
 848         map system = no
 849         map readonly = no
 850         store dos attributes = yes
 851         create mask = 755
 852         vfs objects = $vfs_modulesdir_abs/xattr_tdb.so $vfs_modulesdir_abs/streams_depot.so
 853
 854         printing = vlp
 855         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
 856         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
 857         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
 858         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
 859         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
 860         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
 861         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
 862         lpq cache time = 0
 863
 864         ncalrpc dir = $prefix_abs/ncalrpc
 865         rpc_server:epmapper = embedded
 866
 867         resolv:host file = $dns_host_file
 868
 869         message command = mv %s $shrdir/message.%m
 870
 871         # Begin extra options
 872         $extra_options
 873         # End extra options
 874
 875         #Include user defined custom parameters if set
 876 ";
 877
 878         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
 879                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
 880         }
 881
 882         print CONF "
 883 [tmp]
 884         path = $shrdir
 885 [tmpguest]
 886         path = $shrdir
 887         guest ok = yes
 888 [guestonly]
 889         path = $shrdir
 890         guest only = yes
 891         guest ok = yes
 892 [forceuser]
 893         path = $shrdir
 894         force user = $unix_name
 895         guest ok = yes
 896 [forcegroup]
 897         path = $shrdir
 898         force group = nogroup
 899         guest ok = yes
 900 [ro-tmp]
 901         path = $ro_shrdir
 902         guest ok = yes
 903 [msdfs-share]
 904         path = $msdfs_shrdir
 905         msdfs root = yes
 906         guest ok = yes
 907 [hideunread]
 908         copy = tmp
 909         hide unreadable = yes
 910 [tmpcase]
 911         copy = tmp
 912         case sensitive = yes
 913 [hideunwrite]
 914         copy = tmp
 915         hide unwriteable files = yes
 916 [print1]
 917         copy = tmp
 918         printable = yes
 919
 920 [print2]
 921         copy = print1
 922 [print3]
 923         copy = print1
 924 [lp]
 925         copy = print1
 926 [print\$]
 927         copy = tmp
 928         ";
 929         close(CONF);
 930
 931         ##
 932         ## create a test account
 933         ##
 934
 935         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
 936            warn("Unable to open $nss_wrapper_passwd");
 937            return undef;
 938         }
 939         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
 940 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
 941 ";
 942         if ($unix_uid != 0) {
 943                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false";
 944         }
 945         close(PASSWD);
 946
 947         unless (open(GROUP, ">$nss_wrapper_group")) {
 948              warn("Unable to open $nss_wrapper_group");
 949              return undef;
 950         }
 951         print GROUP "nobody:x:$gid_nobody:
 952 nogroup:x:$gid_nogroup:nobody
 953 $unix_name-group:x:$unix_gids[0]:
 954 domusers:X:$gid_domusers:
 955 ";
 956         if ($unix_gids[0] != 0) {
 957                 print GROUP "root:x:$gid_root:";
 958         }
 959
 960         close(GROUP);
 961
 962         foreach my $evlog (@eventlog_list) {
 963                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
 964                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
 965                 close(EVENTLOG);
 966         }
 967
 968         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
 969         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
 970
 971         my $cmd = Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
 972         unless (open(PWD, "|$cmd")) {
 973              warn("Unable to set password for test account\n$cmd");
 974              return undef;
 975         }
 976         print PWD "$password\n$password\n";
 977         unless (close(PWD)) {
 978              warn("Unable to set password for test account\n$cmd");
 979              return undef;
 980         }
 981         print "DONE\n";
 982
 983         open(HOSTS, ">>$ENV{SELFTEST_PREFIX}/dns_host_file") or die("Unable to open $ENV{SELFTEST_PREFIX}/dns_host_file");
 984         print HOSTS "A $server. $server_ip
 985 ";
 986         close(HOSTS);
 987
 988         $ret{SERVER_IP} = $server_ip;
 989         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
 990         $ret{NMBD_TEST_LOG_POS} = 0;
 991         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
 992         $ret{WINBINDD_TEST_LOG_POS} = 0;
 993         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
 994         $ret{SMBD_TEST_LOG_POS} = 0;
 995         $ret{SERVERCONFFILE} = $conffile;
 996         $ret{CONFIGURATION} ="-s $conffile";
 997         $ret{SERVER} = $server;
 998         $ret{USERNAME} = $unix_name;
 999         $ret{USERID} = $unix_uid;
1000         $ret{DOMAIN} = $domain;
1001         $ret{NETBIOSNAME} = $server;
1002         $ret{PASSWORD} = $password;
1003         $ret{PIDDIR} = $piddir;
1004         $ret{WINBINDD_SOCKET_DIR} = $wbsockdir;
1005         $ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
1006         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
1007         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
1008         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1009         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1010         $ret{NSS_WRAPPER_WINBIND_SO_PATH} = $ENV{NSS_WRAPPER_WINBIND_SO_PATH};
1011         if (not defined($ret{NSS_WRAPPER_WINBIND_SO_PATH})) {
1012                 $ret{NSS_WRAPPER_WINBIND_SO_PATH} = Samba::bindir_path($self, "default/nsswitch/libnss-winbind.so");
1013         }
1014         $ret{LOCAL_PATH} = "$shrdir";
1015
1016         return \%ret;
1017 }
1018
1019 sub wait_for_start($$)
1020 {
1021         my ($self, $envvars) = @_;
1022
1023         # give time for nbt server to register its names
1024         print "delaying for nbt name registration\n";
1025         sleep(10);
1026         # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
1027         system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
1028         system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} __SAMBA__");
1029         system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
1030         system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
1031         system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} $envvars->{SERVER}");
1032
1033         # make sure smbd is also up set
1034         print "wait for smbd\n";
1035
1036         my $count = 0;
1037         my $ret;
1038         do {
1039             $ret = system(Samba::bindir_path($self, "smbclient3") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
1040             if ($ret != 0) {
1041                 sleep(2);
1042             }
1043             $count++
1044         } while ($ret != 0 && $count < 10);
1045         if ($count == 10) {
1046             print "SMBD failed to start up in a reasonable time (20sec)\n";
1047             teardown_env($self, $envvars);
1048             return 0;
1049         }
1050         # Ensure we have domain users mapped.
1051         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
1052         if ($ret != 0) {
1053             return 1;
1054         }
1055
1056         print $self->getlog_env($envvars);
1057
1058         return 1;
1059 }
1060
1061 1;