selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13
  14 sub have_ads($) {
  15         my ($self) = @_;
  16         my $found_ads = 0;
  17         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  18         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  19
  20         while (<IN>) {
  21                 if (/WITH_ADS/) {
  22                        $found_ads = 1;
  23                 }
  24         }
  25         close IN;
  26
  27         # If we were not built with ADS support, pretend we were never even available
  28         print "smbd does not have ADS support\n" unless $found_ads;
  29         return $found_ads;
  30 }
  31
  32 # return smb.conf parameters applicable to @path, based on the underlying
  33 # filesystem type
  34 sub get_fs_specific_conf($$)
  35 {
  36         my ($self, $path) = @_;
  37         my $mods = "";
  38         my $stat_out = `stat --file-system $path` or return "";
  39
  40         if ($stat_out =~ m/Type:\s+btrfs/) {
  41                 $mods .= "btrfs ";
  42         }
  43
  44         if ($mods) {
  45                 return "vfs objects = $mods";
  46         }
  47
  48         return undef;
  49 }
  50
  51 sub new($$) {
  52         my ($classname, $bindir, $srcdir, $server_maxtime) = @_;
  53         my $self = { vars => {},
  54                      bindir => $bindir,
  55                      srcdir => $srcdir,
  56                      server_maxtime => $server_maxtime
  57         };
  58         bless $self;
  59         return $self;
  60 }
  61
  62 sub teardown_env($$)
  63 {
  64         my ($self, $envvars) = @_;
  65         my $count = 0;
  66
  67         # This should cause smbd to terminate gracefully
  68         close($envvars->{STDIN_PIPE});
  69
  70         my $smbdpid = $envvars->{SMBD_TL_PID};
  71         my $nmbdpid = $envvars->{NMBD_TL_PID};
  72         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  73
  74         # This should give it time to write out the gcov data
  75         until ($count > 20) {
  76             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  77             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  78             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  79             if ($smbdchild == -1
  80                 && $nmbdchild == -1
  81                 && $winbinddchild == -1) {
  82                 last;
  83             }
  84             sleep(1);
  85             $count++;
  86         }
  87
  88         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  89             return;
  90         }
  91
  92         $self->stop_sig_term($smbdpid);
  93         $self->stop_sig_term($nmbdpid);
  94         $self->stop_sig_term($winbinddpid);
  95
  96         $count = 0;
  97         until ($count > 10) {
  98             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  99             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 100             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 101             if ($smbdchild == -1
 102                 && $nmbdchild == -1
 103                 && $winbinddchild == -1) {
 104                 last;
 105             }
 106             sleep(1);
 107             $count++;
 108         }
 109
 110         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 111             return;
 112         }
 113
 114         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 115         $self->stop_sig_kill($smbdpid);
 116         $self->stop_sig_kill($nmbdpid);
 117         $self->stop_sig_kill($winbinddpid);
 118
 119         return 0;
 120 }
 121
 122 sub getlog_env_app($$$)
 123 {
 124         my ($self, $envvars, $name) = @_;
 125
 126         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 127         my $out = $title;
 128
 129         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 130
 131         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 132         while (<LOG>) {
 133                 $out .= $_;
 134         }
 135         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 136         close(LOG);
 137
 138         return "" if $out eq $title;
 139
 140         return $out;
 141 }
 142
 143 sub getlog_env($$)
 144 {
 145         my ($self, $envvars) = @_;
 146         my $ret = "";
 147
 148         $ret .= $self->getlog_env_app($envvars, "SMBD");
 149         $ret .= $self->getlog_env_app($envvars, "NMBD");
 150         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 151
 152         return $ret;
 153 }
 154
 155 sub check_env($$)
 156 {
 157         my ($self, $envvars) = @_;
 158
 159         my $childpid = waitpid(-1, WNOHANG);
 160
 161         # TODO ...
 162         return 1;
 163 }
 164
 165 sub setup_env($$$)
 166 {
 167         my ($self, $envname, $path) = @_;
 168
 169         $ENV{ENVNAME} = $envname;
 170
 171         if (defined($self->{vars}->{$envname})) {
 172                 return $self->{vars}->{$envname};
 173         }
 174
 175         #
 176         # Avoid hitting system krb5.conf -
 177         # An env that needs Kerberos will reset this to the real
 178         # value.
 179         #
 180         $ENV{KRB5_CONFIG} = "$path/no_krb5.conf";
 181
 182         if ($envname eq "nt4_dc") {
 183                 return $self->setup_nt4_dc("$path/nt4_dc");
 184         } elsif ($envname eq "nt4_dc_schannel") {
 185                 return $self->setup_nt4_dc_schannel("$path/nt4_dc_schannel");
 186         } elsif ($envname eq "simpleserver") {
 187                 return $self->setup_simpleserver("$path/simpleserver");
 188         } elsif ($envname eq "fileserver") {
 189                 return $self->setup_fileserver("$path/fileserver");
 190         } elsif ($envname eq "maptoguest") {
 191                 return $self->setup_maptoguest("$path/maptoguest");
 192         } elsif ($envname eq "ktest") {
 193                 return $self->setup_ktest("$path/ktest");
 194         } elsif ($envname eq "nt4_member") {
 195                 if (not defined($self->{vars}->{nt4_dc})) {
 196                         if (not defined($self->setup_nt4_dc("$path/nt4_dc"))) {
 197                                 return undef;
 198                         }
 199                 }
 200                 return $self->setup_nt4_member("$path/nt4_member", $self->{vars}->{nt4_dc});
 201         } else {
 202                 return "UNKNOWN";
 203         }
 204 }
 205
 206 sub setup_nt4_dc($$)
 207 {
 208         my ($self, $path) = @_;
 209
 210         print "PROVISIONING NT4 DC...";
 211
 212         my $nt4_dc_options = "
 213         domain master = yes
 214         domain logons = yes
 215         lanman auth = yes
 216         ntlm auth = yes
 217         raw NTLMv2 auth = yes
 218
 219         rpc_server:epmapper = external
 220         rpc_server:spoolss = external
 221         rpc_server:lsarpc = external
 222         rpc_server:samr = external
 223         rpc_server:netlogon = external
 224         rpc_server:register_embedded_np = yes
 225         rpc_server:FssagentRpc = external
 226
 227         rpc_daemon:epmd = fork
 228         rpc_daemon:spoolssd = fork
 229         rpc_daemon:lsasd = fork
 230         rpc_daemon:fssd = fork
 231         fss: sequence timeout = 1
 232 ";
 233
 234         my $vars = $self->provision($path,
 235                                     "LOCALNT4DC2",
 236                                     "localntdc2pass",
 237                                     $nt4_dc_options);
 238
 239         $vars or return undef;
 240
 241         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 242                return undef;
 243         }
 244
 245         $vars->{DC_SERVER} = $vars->{SERVER};
 246         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 247         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 248         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 249         $vars->{DC_USERNAME} = $vars->{USERNAME};
 250         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 251
 252         $self->{vars}->{nt4_dc} = $vars;
 253
 254         return $vars;
 255 }
 256
 257 sub setup_nt4_dc_schannel($$)
 258 {
 259         my ($self, $path) = @_;
 260
 261         print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
 262
 263         my $pdc_options = "
 264         domain master = yes
 265         domain logons = yes
 266         lanman auth = yes
 267
 268         rpc_server:epmapper = external
 269         rpc_server:spoolss = external
 270         rpc_server:lsarpc = external
 271         rpc_server:samr = external
 272         rpc_server:netlogon = external
 273         rpc_server:register_embedded_np = yes
 274
 275         rpc_daemon:epmd = fork
 276         rpc_daemon:spoolssd = fork
 277         rpc_daemon:lsasd = fork
 278
 279         server schannel = yes
 280 ";
 281
 282         my $vars = $self->provision($path,
 283                                     "LOCALNT4DC9",
 284                                     "localntdc9pass",
 285                                     $pdc_options);
 286
 287         $vars or return undef;
 288
 289         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 290                return undef;
 291         }
 292
 293         $vars->{DC_SERVER} = $vars->{SERVER};
 294         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 295         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 296         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 297         $vars->{DC_USERNAME} = $vars->{USERNAME};
 298         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 299
 300         $self->{vars}->{nt4_dc_schannel} = $vars;
 301
 302         return $vars;
 303 }
 304
 305 sub setup_nt4_member($$$)
 306 {
 307         my ($self, $prefix, $nt4_dc_vars) = @_;
 308         my $count = 0;
 309         my $rc;
 310
 311         print "PROVISIONING MEMBER...";
 312
 313         my $require_mutexes = "dbwrap_tdb_require_mutexes:* = yes";
 314         $require_mutexes = "" if ($ENV{SELFTEST_DONT_REQUIRE_TDB_MUTEX_SUPPORT} eq "1");
 315
 316         my $member_options = "
 317         security = domain
 318         dbwrap_tdb_mutexes:* = yes
 319         ${require_mutexes}
 320 ";
 321         my $ret = $self->provision($prefix,
 322                                    "LOCALNT4MEMBER3",
 323                                    "localnt4member3pass",
 324                                    $member_options);
 325
 326         $ret or return undef;
 327
 328         my $nmblookup = Samba::bindir_path($self, "nmblookup");
 329         do {
 330                 print "Waiting for the LOGON SERVER registration ...\n";
 331                 $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
 332                 if ($rc != 0) {
 333                         sleep(1);
 334                 }
 335                 $count++;
 336         } while ($rc != 0 && $count < 10);
 337         if ($count == 10) {
 338                 print "NMBD not reachable after 10 retries\n";
 339                 teardown_env($self, $ret);
 340                 return 0;
 341         }
 342
 343         my $net = Samba::bindir_path($self, "net");
 344         my $cmd = "";
 345         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 346         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 347         $cmd .= "$net join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
 348         $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
 349
 350         if (system($cmd) != 0) {
 351             warn("Join failed\n$cmd");
 352             return undef;
 353         }
 354
 355         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 356                return undef;
 357         }
 358
 359         $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
 360         $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
 361         $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
 362         $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
 363         $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
 364         $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
 365
 366         return $ret;
 367 }
 368
 369 sub setup_admember($$$$)
 370 {
 371         my ($self, $prefix, $dcvars) = @_;
 372
 373         # If we didn't build with ADS, pretend this env was never available
 374         if (not $self->have_ads()) {
 375                 return "UNKNOWN";
 376         }
 377
 378         print "PROVISIONING S3 AD MEMBER...";
 379
 380         my $member_options = "
 381         security = ads
 382         workgroup = $dcvars->{DOMAIN}
 383         realm = $dcvars->{REALM}
 384         netbios aliases = foo bar
 385 ";
 386
 387         my $ret = $self->provision($prefix,
 388                                    "LOCALADMEMBER",
 389                                    "loCalMemberPass",
 390                                    $member_options,
 391                                    $dcvars->{SERVER_IP},
 392                                    $dcvars->{SERVER_IPV6});
 393
 394         $ret or return undef;
 395
 396         close(USERMAP);
 397         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 398         $ret->{REALM} = $dcvars->{REALM};
 399
 400         my $ctx;
 401         my $prefix_abs = abs_path($prefix);
 402         $ctx = {};
 403         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 404         $ctx->{domain} = $dcvars->{DOMAIN};
 405         $ctx->{realm} = $dcvars->{REALM};
 406         $ctx->{dnsname} = lc($dcvars->{REALM});
 407         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 408         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 409         Samba::mk_krb5_conf($ctx, "");
 410
 411         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 412
 413         my $net = Samba::bindir_path($self, "net");
 414         my $cmd = "";
 415         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 416         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 417                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 418         } else {
 419                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 420         }
 421         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 422         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 423         $cmd .= "$net join $ret->{CONFIGURATION}";
 424         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 425
 426         if (system($cmd) != 0) {
 427             warn("Join failed\n$cmd");
 428             return undef;
 429         }
 430
 431         # We need world access to this share, as otherwise the domain
 432         # administrator from the AD domain provided by Samba4 can't
 433         # access the share for tests.
 434         chmod 0777, "$prefix/share";
 435
 436         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 437                 return undef;
 438         }
 439
 440         $ret->{DC_SERVER} = $dcvars->{SERVER};
 441         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 442         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 443         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 444         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 445         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 446
 447         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 448         $ret->{target} = $self;
 449
 450         return $ret;
 451 }
 452
 453 sub setup_admember_rfc2307($$$$)
 454 {
 455         my ($self, $prefix, $dcvars) = @_;
 456
 457         # If we didn't build with ADS, pretend this env was never available
 458         if (not $self->have_ads()) {
 459                 return "UNKNOWN";
 460         }
 461
 462         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 463
 464         my $member_options = "
 465         security = ads
 466         workgroup = $dcvars->{DOMAIN}
 467         realm = $dcvars->{REALM}
 468         idmap config * : backend = autorid
 469         idmap config * : range = 1000000-1999999
 470         idmap config * : rangesize = 100000
 471         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 472         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 473         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 474         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 475         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 476 ";
 477
 478         my $ret = $self->provision($prefix,
 479                                    "RFC2307MEMBER",
 480                                    "loCalMemberPass",
 481                                    $member_options,
 482                                    $dcvars->{SERVER_IP},
 483                                    $dcvars->{SERVER_IPV6});
 484
 485         $ret or return undef;
 486
 487         close(USERMAP);
 488         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 489         $ret->{REALM} = $dcvars->{REALM};
 490
 491         my $ctx;
 492         my $prefix_abs = abs_path($prefix);
 493         $ctx = {};
 494         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 495         $ctx->{domain} = $dcvars->{DOMAIN};
 496         $ctx->{realm} = $dcvars->{REALM};
 497         $ctx->{dnsname} = lc($dcvars->{REALM});
 498         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 499         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 500         Samba::mk_krb5_conf($ctx, "");
 501
 502         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 503
 504         my $net = Samba::bindir_path($self, "net");
 505         my $cmd = "";
 506         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 507         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 508                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 509         } else {
 510                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 511         }
 512         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 513         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 514         $cmd .= "$net join $ret->{CONFIGURATION}";
 515         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 516
 517         if (system($cmd) != 0) {
 518             warn("Join failed\n$cmd");
 519             return undef;
 520         }
 521
 522         # We need world access to this share, as otherwise the domain
 523         # administrator from the AD domain provided by Samba4 can't
 524         # access the share for tests.
 525         chmod 0777, "$prefix/share";
 526
 527         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 528                 return undef;
 529         }
 530
 531         $ret->{DC_SERVER} = $dcvars->{SERVER};
 532         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 533         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 534         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 535         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 536         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 537
 538         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 539         $ret->{target} = $self;
 540
 541         return $ret;
 542 }
 543
 544 sub setup_simpleserver($$)
 545 {
 546         my ($self, $path) = @_;
 547
 548         print "PROVISIONING simple server...";
 549
 550         my $prefix_abs = abs_path($path);
 551
 552         my $simpleserver_options = "
 553         lanman auth = yes
 554         ntlm auth = yes
 555         vfs objects = xattr_tdb streams_depot time_audit full_audit
 556         change notify = no
 557
 558         full_audit:syslog = no
 559         full_audit:success = none
 560         full_audit:failure = none
 561
 562 [vfs_aio_fork]
 563         path = $prefix_abs/share
 564         vfs objects = aio_fork
 565         read only = no
 566         vfs_aio_fork:erratic_testing_mode=yes
 567
 568 [dosmode]
 569         path = $prefix_abs/share
 570         vfs objects =
 571         store dos attributes = yes
 572         hide files = /hidefile/
 573         hide dot files = yes
 574 ";
 575
 576         my $vars = $self->provision($path,
 577                                     "LOCALSHARE4",
 578                                     "local4pass",
 579                                     $simpleserver_options);
 580
 581         $vars or return undef;
 582
 583         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 584                return undef;
 585         }
 586
 587         $self->{vars}->{simpleserver} = $vars;
 588
 589         return $vars;
 590 }
 591
 592 sub setup_fileserver($$)
 593 {
 594         my ($self, $path) = @_;
 595         my $prefix_abs = abs_path($path);
 596         my $srcdir_abs = abs_path($self->{srcdir});
 597
 598         print "PROVISIONING file server ...\n";
 599
 600         my @dirs = ();
 601
 602         mkdir($prefix_abs, 0777);
 603
 604         my $share_dir="$prefix_abs/share";
 605
 606         # Create share directory structure
 607         my $lower_case_share_dir="$share_dir/lower-case";
 608         push(@dirs, $lower_case_share_dir);
 609
 610         my $lower_case_share_dir_30000="$share_dir/lower-case-30000";
 611         push(@dirs, $lower_case_share_dir_30000);
 612
 613         my $dfree_share_dir="$share_dir/dfree";
 614         push(@dirs, $dfree_share_dir);
 615         push(@dirs, "$dfree_share_dir/subdir1");
 616         push(@dirs, "$dfree_share_dir/subdir2");
 617
 618         my $valid_users_sharedir="$share_dir/valid_users";
 619         push(@dirs,$valid_users_sharedir);
 620
 621         my $offline_sharedir="$share_dir/offline";
 622         push(@dirs,$offline_sharedir);
 623
 624         my $force_user_valid_users_dir = "$share_dir/force_user_valid_users";
 625         push(@dirs, $force_user_valid_users_dir);
 626
 627         my $smbget_sharedir="$share_dir/smbget";
 628         push(@dirs,$smbget_sharedir);
 629
 630         my $fileserver_options = "
 631 [lowercase]
 632         path = $lower_case_share_dir
 633         comment = smb username is [%U]
 634         case sensitive = True
 635         default case = lower
 636         preserve case = no
 637         short preserve case = no
 638 [lowercase-30000]
 639         path = $lower_case_share_dir_30000
 640         comment = smb username is [%U]
 641         case sensitive = True
 642         default case = lower
 643         preserve case = no
 644         short preserve case = no
 645 [dfree]
 646         path = $dfree_share_dir
 647         comment = smb username is [%U]
 648         dfree command = $srcdir_abs/testprogs/blackbox/dfree.sh
 649 [valid-users-access]
 650         path = $valid_users_sharedir
 651         valid users = +userdup
 652 [offline]
 653         path = $offline_sharedir
 654         vfs objects = offline
 655
 656 # BUG: https://bugzilla.samba.org/show_bug.cgi?id=9878
 657 # RH BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1077651
 658 [force_user_valid_users]
 659         path = $force_user_valid_users_dir
 660         comment = force user with valid users combination test share
 661         valid users = +force_user
 662         force user = force_user
 663         force group = everyone
 664         write list = force_user
 665
 666 [smbget]
 667         path = $smbget_sharedir
 668         comment = smb username is [%U]
 669         guest ok = yes
 670 [ign_sysacls]
 671         path = $share_dir
 672         comment = ignore system acls
 673         acl_xattr:ignore system acls = yes
 674 [inherit_owner]
 675         path = $share_dir
 676         comment = inherit owner
 677         inherit owner = yes
 678 ";
 679
 680         my $vars = $self->provision($path,
 681                                     "FILESERVER",
 682                                     "fileserver",
 683                                     $fileserver_options,
 684                                     undef,
 685                                     undef,
 686                                     1);
 687
 688         $vars or return undef;
 689
 690         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 691                return undef;
 692         }
 693
 694         $self->{vars}->{fileserver} = $vars;
 695
 696         mkdir($_, 0777) foreach(@dirs);
 697
 698         ## Create case sensitive lower case share dir
 699         foreach my $file ('a'..'z') {
 700                 my $full_path = $lower_case_share_dir . '/' . $file;
 701                 open my $fh, '>', $full_path;
 702                 # Add some content to file
 703                 print $fh $full_path;
 704                 close $fh;
 705         }
 706
 707         for (my $file = 1; $file < 51; ++$file) {
 708                 my $full_path = $lower_case_share_dir . '/' . $file;
 709                 open my $fh, '>', $full_path;
 710                 # Add some content to file
 711                 print $fh $full_path;
 712                 close $fh;
 713         }
 714
 715         # Create content for 30000 share
 716         foreach my $file ('a'..'z') {
 717                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 718                 open my $fh, '>', $full_path;
 719                 # Add some content to file
 720                 print $fh $full_path;
 721                 close $fh;
 722         }
 723
 724         for (my $file = 1; $file < 30001; ++$file) {
 725                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 726                 open my $fh, '>', $full_path;
 727                 # Add some content to file
 728                 print $fh $full_path;
 729                 close $fh;
 730         }
 731
 732         ##
 733         ## create a listable file in valid_users_share
 734         ##
 735         my $valid_users_target = "$valid_users_sharedir/foo";
 736         unless (open(VALID_USERS_TARGET, ">$valid_users_target")) {
 737                 warn("Unable to open $valid_users_target");
 738                 return undef;
 739         }
 740         close(VALID_USERS_TARGET);
 741         chmod 0644, $valid_users_target;
 742
 743         return $vars;
 744 }
 745
 746 sub setup_ktest($$$)
 747 {
 748         my ($self, $prefix) = @_;
 749
 750         # If we didn't build with ADS, pretend this env was never available
 751         if (not $self->have_ads()) {
 752                 return "UNKNOWN";
 753         }
 754
 755         print "PROVISIONING server with security=ads...";
 756
 757         my $ktest_options = "
 758         workgroup = KTEST
 759         realm = ktest.samba.example.com
 760         security = ads
 761         username map = $prefix/lib/username.map
 762         server signing = required
 763 ";
 764
 765         my $ret = $self->provision($prefix,
 766                                    "LOCALKTEST6",
 767                                    "localktest6pass",
 768                                    $ktest_options);
 769
 770         $ret or return undef;
 771
 772         my $ctx;
 773         my $prefix_abs = abs_path($prefix);
 774         $ctx = {};
 775         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 776         $ctx->{domain} = "KTEST";
 777         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 778         $ctx->{dnsname} = lc($ctx->{realm});
 779         $ctx->{kdc_ipv4} = "0.0.0.0";
 780         $ctx->{kdc_ipv6} = "::";
 781         Samba::mk_krb5_conf($ctx, "");
 782
 783         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 784
 785         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 786         print USERMAP "
 787 $ret->{USERNAME} = KTEST\\Administrator
 788 ";
 789         close(USERMAP);
 790
 791 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 792 #Samba4 DC with the same parameters as are being used here.  The
 793 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 794
 795         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 796         chmod 0600, "$prefix/private/secrets.tdb";
 797
 798 #Make sure there's no old ntdb file.
 799         system("rm -f $prefix/private/secrets.ntdb");
 800
 801 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 802 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 803 #
 804 #and having in krb5.conf:
 805 # ticket_lifetime = 799718400
 806 # renew_lifetime = 799718400
 807 #
 808 # The commands for the -2 keytab where were:
 809 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 810 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 811 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 812 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 813 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 814 #
 815 # and then for the -3 keytab, I did
 816 #
 817 # net changetrustpw; kdestroy and the same again.
 818 #
 819 # This creates a credential cache with a very long lifetime (2036 at
 820 # at 2011-04), and shows that running 'net changetrustpw' does not
 821 # break existing logins (for the secrets.tdb method at least).
 822 #
 823
 824         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
 825
 826         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
 827         chmod 0600, "$prefix/krb5_ccache-2";
 828
 829         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
 830         chmod 0600, "$prefix/krb5_ccache-3";
 831
 832         # We need world access to this share, as otherwise the domain
 833         # administrator from the AD domain provided by ktest can't
 834         # access the share for tests.
 835         chmod 0777, "$prefix/share";
 836
 837         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
 838                return undef;
 839         }
 840         return $ret;
 841 }
 842
 843 sub setup_maptoguest($$)
 844 {
 845         my ($self, $path) = @_;
 846
 847         print "PROVISIONING maptoguest...";
 848
 849         my $options = "
 850 map to guest = bad user
 851 ntlm auth = yes
 852 ";
 853
 854         my $vars = $self->provision($path,
 855                                     "maptoguest",
 856                                     "maptoguestpass",
 857                                     $options);
 858
 859         $vars or return undef;
 860
 861         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 862                return undef;
 863         }
 864
 865         $self->{vars}->{s3maptoguest} = $vars;
 866
 867         return $vars;
 868 }
 869
 870 sub stop_sig_term($$) {
 871         my ($self, $pid) = @_;
 872         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 873 }
 874
 875 sub stop_sig_kill($$) {
 876         my ($self, $pid) = @_;
 877         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 878 }
 879
 880 sub write_pid($$$)
 881 {
 882         my ($env_vars, $app, $pid) = @_;
 883
 884         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
 885         print PID $pid;
 886         close(PID);
 887 }
 888
 889 sub read_pid($$)
 890 {
 891         my ($env_vars, $app) = @_;
 892
 893         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
 894         my $pid = <PID>;
 895         close(PID);
 896         return $pid;
 897 }
 898
 899 sub check_or_start($$$$$) {
 900         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
 901
 902         # use a pipe for stdin in the child processes. This allows
 903         # those processes to monitor the pipe for EOF to ensure they
 904         # exit when the test script exits
 905         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
 906
 907         unlink($env_vars->{NMBD_TEST_LOG});
 908         print "STARTING NMBD...";
 909         my $pid = fork();
 910         if ($pid == 0) {
 911                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
 912                 open STDERR, '>&STDOUT';
 913
 914                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 915
 916                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 917                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 918                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 919
 920                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 921                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 922                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 923                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 924                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 925                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 926                 $ENV{UID_WRAPPER_ROOT} = "1";
 927
 928                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
 929
 930                 if ($nmbd ne "yes") {
 931                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 932                                 my $signame = shift;
 933                                 print("Skip nmbd received signal $signame");
 934                                 exit 0;
 935                         };
 936                         sleep($self->{server_maxtime});
 937                         exit 0;
 938                 }
 939
 940                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
 941                 my @optargs = ("-d0");
 942                 if (defined($ENV{NMBD_OPTIONS})) {
 943                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
 944                 }
 945                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 946                 if(defined($ENV{NMBD_VALGRIND})) {
 947                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
 948                 }
 949                 my @args = ("-F", "--no-process-group",
 950                             "-s", $env_vars->{SERVERCONFFILE},
 951                             "-l", $env_vars->{LOGDIR});
 952                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
 953                         push(@args, "--log-stdout");
 954                 }
 955
 956                 close($env_vars->{STDIN_PIPE});
 957                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 958
 959                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 960                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 961         }
 962         $env_vars->{NMBD_TL_PID} = $pid;
 963         write_pid($env_vars, "nmbd", $pid);
 964         print "DONE\n";
 965
 966         unlink($env_vars->{WINBINDD_TEST_LOG});
 967         print "STARTING WINBINDD...";
 968         $pid = fork();
 969         if ($pid == 0) {
 970                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
 971                 open STDERR, '>&STDOUT';
 972
 973                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 974
 975                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 976                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 977                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 978
 979                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 980                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 981                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 982                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 983                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 984                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 985                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
 986                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
 987                 } else {
 988                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
 989                 }
 990                 $ENV{UID_WRAPPER_ROOT} = "1";
 991
 992                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
 993
 994                 if ($winbindd ne "yes") {
 995                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 996                                 my $signame = shift;
 997                                 print("Skip winbindd received signal $signame");
 998                                 exit 0;
 999                         };
1000                         sleep($self->{server_maxtime});
1001                         exit 0;
1002                 }
1003
1004                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
1005                 my @optargs = ("-d0");
1006                 if (defined($ENV{WINBINDD_OPTIONS})) {
1007                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
1008                 }
1009                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1010                 if(defined($ENV{WINBINDD_VALGRIND})) {
1011                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
1012                 }
1013                 my @args = ("-F", "--no-process-group",
1014                             "-s", $env_vars->{SERVERCONFFILE},
1015                             "-l", $env_vars->{LOGDIR});
1016                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
1017                         push(@args, "--stdout");
1018                 }
1019
1020                 close($env_vars->{STDIN_PIPE});
1021                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1022
1023                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1024                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1025         }
1026         $env_vars->{WINBINDD_TL_PID} = $pid;
1027         write_pid($env_vars, "winbindd", $pid);
1028         print "DONE\n";
1029
1030         unlink($env_vars->{SMBD_TEST_LOG});
1031         print "STARTING SMBD...";
1032         $pid = fork();
1033         if ($pid == 0) {
1034                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
1035                 open STDERR, '>&STDOUT';
1036
1037                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1038
1039                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1040                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1041                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1042
1043                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1044                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1045                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1046                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1047                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1048                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1049                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
1050                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
1051                 } else {
1052                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1053                 }
1054                 $ENV{UID_WRAPPER_ROOT} = "1";
1055
1056                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
1057
1058                 if ($smbd ne "yes") {
1059                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1060                                 my $signame = shift;
1061                                 print("Skip smbd received signal $signame");
1062                                 exit 0;
1063                         };
1064                         sleep($self->{server_maxtime});
1065                         exit 0;
1066                 }
1067
1068                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
1069                 my @optargs = ("-d0");
1070                 if (defined($ENV{SMBD_OPTIONS})) {
1071                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
1072                 }
1073                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1074                 if(defined($ENV{SMBD_VALGRIND})) {
1075                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
1076                 }
1077                 my @args = ("-F", "--no-process-group",
1078                             "-s", $env_vars->{SERVERCONFFILE},
1079                             "-l", $env_vars->{LOGDIR});
1080                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
1081                         push(@args, "--log-stdout");
1082                 }
1083
1084                 close($env_vars->{STDIN_PIPE});
1085                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1086
1087                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1088                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1089         }
1090         $env_vars->{SMBD_TL_PID} = $pid;
1091         write_pid($env_vars, "smbd", $pid);
1092         print "DONE\n";
1093
1094         close(STDIN_READER);
1095
1096         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
1097 }
1098
1099 sub createuser($$$$)
1100 {
1101         my ($self, $username, $password, $conffile) = @_;
1102         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $username > /dev/null";
1103         unless (open(PWD, "|$cmd")) {
1104             warn("Unable to set password for $username account\n$cmd");
1105             return undef;
1106         }
1107         print PWD "$password\n$password\n";
1108         unless (close(PWD)) {
1109             warn("Unable to set password for $username account\n$cmd");
1110             return undef;
1111         }
1112         print "DONE\n";
1113 }
1114
1115 sub provision($$$$$$$$)
1116 {
1117         my ($self, $prefix, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
1118
1119         ##
1120         ## setup the various environment variables we need
1121         ##
1122
1123         my $swiface = Samba::get_interface($server);
1124         my %ret = ();
1125         my $server_ip = "127.0.0.$swiface";
1126         my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
1127         my $domain = "SAMBA-TEST";
1128
1129         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
1130         chomp $unix_name;
1131         my $unix_uid = $>;
1132         my $unix_gids_str = $);
1133         my @unix_gids = split(" ", $unix_gids_str);
1134
1135         my $prefix_abs = abs_path($prefix);
1136         my $bindir_abs = abs_path($self->{bindir});
1137
1138         my @dirs = ();
1139
1140         my $shrdir="$prefix_abs/share";
1141         push(@dirs,$shrdir);
1142
1143         my $libdir="$prefix_abs/lib";
1144         push(@dirs,$libdir);
1145
1146         my $piddir="$prefix_abs/pid";
1147         push(@dirs,$piddir);
1148
1149         my $privatedir="$prefix_abs/private";
1150         push(@dirs,$privatedir);
1151
1152         my $lockdir="$prefix_abs/lockdir";
1153         push(@dirs,$lockdir);
1154
1155         my $eventlogdir="$prefix_abs/lockdir/eventlog";
1156         push(@dirs,$eventlogdir);
1157
1158         my $logdir="$prefix_abs/logs";
1159         push(@dirs,$logdir);
1160
1161         my $driver32dir="$shrdir/W32X86";
1162         push(@dirs,$driver32dir);
1163
1164         my $driver64dir="$shrdir/x64";
1165         push(@dirs,$driver64dir);
1166
1167         my $driver40dir="$shrdir/WIN40";
1168         push(@dirs,$driver40dir);
1169
1170         my $ro_shrdir="$shrdir/root-tmp";
1171         push(@dirs,$ro_shrdir);
1172
1173         my $msdfs_shrdir="$shrdir/msdfsshare";
1174         push(@dirs,$msdfs_shrdir);
1175
1176         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
1177         push(@dirs,$msdfs_deeppath);
1178
1179         my $badnames_shrdir="$shrdir/badnames";
1180         push(@dirs,$badnames_shrdir);
1181
1182         my $lease1_shrdir="$shrdir/SMB2_10";
1183         push(@dirs,$lease1_shrdir);
1184
1185         my $lease2_shrdir="$shrdir/SMB3_00";
1186         push(@dirs,$lease2_shrdir);
1187
1188         my $manglenames_shrdir="$shrdir/manglenames";
1189         push(@dirs,$manglenames_shrdir);
1190
1191         my $widelinks_shrdir="$shrdir/widelinks";
1192         push(@dirs,$widelinks_shrdir);
1193
1194         my $widelinks_linkdir="$shrdir/widelinks_foo";
1195         push(@dirs,$widelinks_linkdir);
1196
1197         my $shadow_tstdir="$shrdir/shadow";
1198         push(@dirs,$shadow_tstdir);
1199         my $shadow_mntdir="$shadow_tstdir/mount";
1200         push(@dirs,$shadow_mntdir);
1201         my $shadow_basedir="$shadow_mntdir/base";
1202         push(@dirs,$shadow_basedir);
1203         my $shadow_shrdir="$shadow_basedir/share";
1204         push(@dirs,$shadow_shrdir);
1205
1206         # this gets autocreated by winbindd
1207         my $wbsockdir="$prefix_abs/winbindd";
1208         my $wbsockprivdir="$lockdir/winbindd_privileged";
1209
1210         my $nmbdsockdir="$prefix_abs/nmbd";
1211         unlink($nmbdsockdir);
1212
1213         ##
1214         ## create the test directory layout
1215         ##
1216         die ("prefix_abs = ''") if $prefix_abs eq "";
1217         die ("prefix_abs = '/'") if $prefix_abs eq "/";
1218
1219         mkdir($prefix_abs, 0777);
1220         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
1221         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
1222             system("rm -rf $prefix_abs/*");
1223         }
1224         mkdir($_, 0777) foreach(@dirs);
1225
1226         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
1227
1228         ##
1229         ## lockdir and piddir must be 0755
1230         ##
1231         chmod 0755, $lockdir;
1232         chmod 0755, $piddir;
1233
1234
1235         ##
1236         ## create ro and msdfs share layout
1237         ##
1238
1239         chmod 0755, $ro_shrdir;
1240         my $unreadable_file = "$ro_shrdir/unreadable_file";
1241         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
1242                 warn("Unable to open $unreadable_file");
1243                 return undef;
1244         }
1245         close(UNREADABLE_FILE);
1246         chmod 0600, $unreadable_file;
1247
1248         my $msdfs_target = "$ro_shrdir/msdfs-target";
1249         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
1250                 warn("Unable to open $msdfs_target");
1251                 return undef;
1252         }
1253         close(MSDFS_TARGET);
1254         chmod 0666, $msdfs_target;
1255         symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
1256                 "$msdfs_shrdir/msdfs-src1";
1257         symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
1258
1259         ##
1260         ## create bad names in $badnames_shrdir
1261         ##
1262         ## (An invalid name, would be mangled to 8.3).
1263         my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
1264         unless (open(BADNAME_TARGET, ">$badname_target")) {
1265                 warn("Unable to open $badname_target");
1266                 return undef;
1267         }
1268         close(BADNAME_TARGET);
1269         chmod 0666, $badname_target;
1270
1271         ## (A bad name, would not be mangled to 8.3).
1272         my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
1273         unless (open(BADNAME_TARGET, ">$badname_target")) {
1274                 warn("Unable to open $badname_target");
1275                 return undef;
1276         }
1277         close(BADNAME_TARGET);
1278         chmod 0666, $badname_target;
1279
1280         ## (A bad good name).
1281         my $badname_target = "$badnames_shrdir/blank.txt";
1282         unless (open(BADNAME_TARGET, ">$badname_target")) {
1283                 warn("Unable to open $badname_target");
1284                 return undef;
1285         }
1286         close(BADNAME_TARGET);
1287         chmod 0666, $badname_target;
1288
1289         ##
1290         ## create mangleable directory names in $manglenames_shrdir
1291         ##
1292         my $manglename_target = "$manglenames_shrdir/foo:bar";
1293         mkdir($manglename_target, 0777);
1294
1295         ##
1296         ## create symlinks for widelinks tests.
1297         ##
1298         my $widelinks_target = "$widelinks_linkdir/target";
1299         unless (open(WIDELINKS_TARGET, ">$widelinks_target")) {
1300                 warn("Unable to open $widelinks_target");
1301                 return undef;
1302         }
1303         close(WIDELINKS_TARGET);
1304         chmod 0666, $widelinks_target;
1305         ##
1306         ## This link should get ACCESS_DENIED
1307         ##
1308         symlink "$widelinks_target", "$widelinks_shrdir/source";
1309         ##
1310         ## This link should be allowed
1311         ##
1312         symlink "$widelinks_shrdir", "$widelinks_shrdir/dot";
1313
1314         my $conffile="$libdir/server.conf";
1315         my $dfqconffile="$libdir/dfq.conf";
1316
1317         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
1318         my $nss_wrapper_passwd = "$privatedir/passwd";
1319         my $nss_wrapper_group = "$privatedir/group";
1320         my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
1321         my $resolv_conf = "$privatedir/resolv.conf";
1322         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
1323
1324         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
1325
1326         my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
1327
1328         my @eventlog_list = ("dns server", "application");
1329
1330         ##
1331         ## calculate uids and gids
1332         ##
1333
1334         my ($max_uid, $max_gid);
1335         my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2, $uid_userdup);
1336         my ($uid_pdbtest_wkn);
1337         my ($uid_smbget);
1338         my ($uid_force_user);
1339         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
1340         my ($gid_userdup, $gid_everyone);
1341         my ($gid_force_user);
1342
1343         if ($unix_uid < 0xffff - 7) {
1344                 $max_uid = 0xffff;
1345         } else {
1346                 $max_uid = $unix_uid;
1347         }
1348
1349         $uid_root = $max_uid - 1;
1350         $uid_nobody = $max_uid - 2;
1351         $uid_pdbtest = $max_uid - 3;
1352         $uid_pdbtest2 = $max_uid - 4;
1353         $uid_userdup = $max_uid - 5;
1354         $uid_pdbtest_wkn = $max_uid - 6;
1355         $uid_force_user = $max_uid - 7;
1356         $uid_smbget = $max_uid - 8;
1357
1358         if ($unix_gids[0] < 0xffff - 8) {
1359                 $max_gid = 0xffff;
1360         } else {
1361                 $max_gid = $unix_gids[0];
1362         }
1363
1364         $gid_nobody = $max_gid - 1;
1365         $gid_nogroup = $max_gid - 2;
1366         $gid_root = $max_gid - 3;
1367         $gid_domusers = $max_gid - 4;
1368         $gid_domadmins = $max_gid - 5;
1369         $gid_userdup = $max_gid - 6;
1370         $gid_everyone = $max_gid - 7;
1371         $gid_force_user = $max_gid - 8;
1372
1373         ##
1374         ## create conffile
1375         ##
1376
1377         unless (open(CONF, ">$conffile")) {
1378                 warn("Unable to open $conffile");
1379                 return undef;
1380         }
1381         print CONF "
1382 [global]
1383         netbios name = $server
1384         interfaces = $server_ip/8 $server_ipv6/64
1385         bind interfaces only = yes
1386         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1387         smbd:suicide mode = yes
1388
1389         workgroup = $domain
1390
1391         private dir = $privatedir
1392         pid directory = $piddir
1393         lock directory = $lockdir
1394         log file = $logdir/log.\%m
1395         log level = 1
1396         debug pid = yes
1397         max log size = 0
1398
1399         state directory = $lockdir
1400         cache directory = $lockdir
1401
1402         passdb backend = tdbsam
1403
1404         time server = yes
1405
1406         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1407         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
1408         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1409         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1410         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1411         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
1412         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1413
1414         addprinter command =            $mod_printer_pl -a -s $conffile --
1415         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1416
1417         eventlog list = application \"dns server\"
1418
1419         kernel oplocks = no
1420         kernel change notify = no
1421
1422         logging = file
1423         printing = bsd
1424         printcap name = /dev/null
1425
1426         winbindd socket directory = $wbsockdir
1427         nmbd:socket dir = $nmbdsockdir
1428         idmap config * : range = 100000-200000
1429         winbind enum users = yes
1430         winbind enum groups = yes
1431         winbind separator = /
1432
1433 #       min receivefile size = 4000
1434
1435         read only = no
1436
1437         smbd:sharedelay = 100000
1438         smbd:writetimeupdatedelay = 500000
1439         map hidden = no
1440         map system = no
1441         map readonly = no
1442         store dos attributes = yes
1443         create mask = 755
1444         dos filemode = yes
1445         strict rename = yes
1446         strict sync = yes
1447         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
1448
1449         printing = vlp
1450         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1451         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1452         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1453         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1454         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1455         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1456         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1457         lpq cache time = 0
1458         print notify backchannel = yes
1459
1460         ncalrpc dir = $prefix_abs/ncalrpc
1461
1462         # The samba3.blackbox.smbclient_s3 test uses this to test that
1463         # sending messages works, and that the %m sub works.
1464         message command = mv %s $shrdir/message.%m
1465
1466         # fsrvp server requires registry shares
1467         registry shares = yes
1468
1469         # Used by RPC SRVSVC tests
1470         add share command = $bindir_abs/smbaddshare
1471         change share command = $bindir_abs/smbchangeshare
1472         delete share command = $bindir_abs/smbdeleteshare
1473
1474         # fruit:copyfile is a global option
1475         fruit:copyfile = yes
1476
1477         #this does not mean that we use non-secure test env,
1478         #it just means we ALLOW one to be configured.
1479         allow insecure wide links = yes
1480
1481         # Begin extra options
1482         $extra_options
1483         # End extra options
1484
1485         #Include user defined custom parameters if set
1486 ";
1487
1488         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1489                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1490         }
1491
1492         print CONF "
1493 [tmp]
1494         path = $shrdir
1495         comment = smb username is [%U]
1496 [tmpsort]
1497         path = $shrdir
1498         comment = Load dirsort module
1499         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1500 [tmpenc]
1501         path = $shrdir
1502         comment = encrypt smb username is [%U]
1503         smb encrypt = required
1504         vfs objects = dirsort
1505 [tmpguest]
1506         path = $shrdir
1507         guest ok = yes
1508 [guestonly]
1509         path = $shrdir
1510         guest only = yes
1511         guest ok = yes
1512 [forceuser]
1513         path = $shrdir
1514         force user = $unix_name
1515         guest ok = yes
1516 [forceuser_unixonly]
1517         comment = force a user with unix user SID and group SID
1518         path = $shrdir
1519         force user = pdbtest
1520         guest ok = yes
1521 [forceuser_wkngroup]
1522         comment = force a user with well-known group SID
1523         path = $shrdir
1524         force user = pdbtest_wkn
1525         guest ok = yes
1526 [forcegroup]
1527         path = $shrdir
1528         force group = nogroup
1529         guest ok = yes
1530 [ro-tmp]
1531         path = $ro_shrdir
1532         guest ok = yes
1533 [write-list-tmp]
1534         path = $shrdir
1535         read only = yes
1536         write list = $unix_name
1537 [valid-users-tmp]
1538         path = $shrdir
1539         valid users = $unix_name
1540         access based share enum = yes
1541 [msdfs-share]
1542         path = $msdfs_shrdir
1543         msdfs root = yes
1544         msdfs shuffle referrals = yes
1545         guest ok = yes
1546 [hideunread]
1547         copy = tmp
1548         hide unreadable = yes
1549 [tmpcase]
1550         copy = tmp
1551         case sensitive = yes
1552 [hideunwrite]
1553         copy = tmp
1554         hide unwriteable files = yes
1555 [durable]
1556         copy = tmp
1557         kernel share modes = no
1558         kernel oplocks = no
1559         posix locking = no
1560 [fs_specific]
1561         copy = tmp
1562         $fs_specific_conf
1563 [print1]
1564         copy = tmp
1565         printable = yes
1566
1567 [print2]
1568         copy = print1
1569 [print3]
1570         copy = print1
1571         default devmode = no
1572 [lp]
1573         copy = print1
1574
1575 [nfs4acl_simple]
1576         path = $shrdir
1577         comment = smb username is [%U]
1578         nfs4:mode = simple
1579         vfs objects = nfs4acl_xattr xattr_tdb
1580
1581 [nfs4acl_special]
1582         path = $shrdir
1583         comment = smb username is [%U]
1584         nfs4:mode = special
1585         vfs objects = nfs4acl_xattr xattr_tdb
1586
1587 [xcopy_share]
1588         path = $shrdir
1589         comment = smb username is [%U]
1590         create mask = 777
1591         force create mode = 777
1592 [posix_share]
1593         path = $shrdir
1594         comment = smb username is [%U]
1595         create mask = 0777
1596         force create mode = 0
1597         directory mask = 0777
1598         force directory mode = 0
1599         vfs objects = xattr_tdb streams_depot
1600 [aio]
1601         copy = tmp
1602         aio read size = 1
1603         aio write size = 1
1604
1605 [print\$]
1606         copy = tmp
1607
1608 [vfs_fruit]
1609         path = $shrdir
1610         vfs objects = catia fruit streams_xattr acl_xattr
1611         ea support = yes
1612         fruit:ressource = file
1613         fruit:metadata = netatalk
1614         fruit:locking = netatalk
1615         fruit:encoding = native
1616
1617 [badname-tmp]
1618         path = $badnames_shrdir
1619         guest ok = yes
1620
1621 [manglenames_share]
1622         path = $manglenames_shrdir
1623         guest ok = yes
1624
1625 [dynamic_share]
1626         path = $shrdir/%R
1627         guest ok = yes
1628
1629 [widelinks_share]
1630         path = $widelinks_shrdir
1631         wide links = no
1632         guest ok = yes
1633
1634 [fsrvp_share]
1635         path = $shrdir
1636         comment = fake shapshots using rsync
1637         vfs objects = shell_snap shadow_copy2
1638         shell_snap:check path command = $fake_snap_pl --check
1639         shell_snap:create command = $fake_snap_pl --create
1640         shell_snap:delete command = $fake_snap_pl --delete
1641         # a relative path here fails, the snapshot dir is no longer found
1642         shadow:snapdir = $shrdir/.snapshots
1643
1644 [shadow1]
1645         path = $shadow_shrdir
1646         comment = previous versions snapshots under mount point
1647         vfs objects = shadow_copy2
1648         shadow:mountpoint = $shadow_mntdir
1649
1650 [shadow2]
1651         path = $shadow_shrdir
1652         comment = previous versions snapshots outside mount point
1653         vfs objects = shadow_copy2
1654         shadow:mountpoint = $shadow_mntdir
1655         shadow:snapdir = $shadow_tstdir/.snapshots
1656
1657 [shadow3]
1658         path = $shadow_shrdir
1659         comment = previous versions with subvolume snapshots, snapshots under base dir
1660         vfs objects = shadow_copy2
1661         shadow:mountpoint = $shadow_mntdir
1662         shadow:basedir = $shadow_basedir
1663         shadow:snapdir = $shadow_basedir/.snapshots
1664
1665 [shadow4]
1666         path = $shadow_shrdir
1667         comment = previous versions with subvolume snapshots, snapshots outside mount point
1668         vfs objects = shadow_copy2
1669         shadow:mountpoint = $shadow_mntdir
1670         shadow:basedir = $shadow_basedir
1671         shadow:snapdir = $shadow_tstdir/.snapshots
1672
1673 [shadow5]
1674         path = $shadow_shrdir
1675         comment = previous versions at volume root snapshots under mount point
1676         vfs objects = shadow_copy2
1677         shadow:mountpoint = $shadow_shrdir
1678
1679 [shadow6]
1680         path = $shadow_shrdir
1681         comment = previous versions at volume root snapshots outside mount point
1682         vfs objects = shadow_copy2
1683         shadow:mountpoint = $shadow_shrdir
1684         shadow:snapdir = $shadow_tstdir/.snapshots
1685
1686 [shadow7]
1687         path = $shadow_shrdir
1688         comment = previous versions snapshots everywhere
1689         vfs objects = shadow_copy2
1690         shadow:mountpoint = $shadow_mntdir
1691         shadow:snapdirseverywhere = yes
1692
1693 [shadow8]
1694         path = $shadow_shrdir
1695         comment = previous versions using snapsharepath
1696         vfs objects = shadow_copy2
1697         shadow:mountpoint = $shadow_mntdir
1698         shadow:snapdir = $shadow_tstdir/.snapshots
1699         shadow:snapsharepath = share
1700
1701 [shadow_fmt0]
1702         comment = Testing shadow:format with default option
1703         vfs object = shadow_copy2
1704         path = $shadow_shrdir
1705         read only = no
1706         guest ok = yes
1707         shadow:mountpoint = $shadow_mntdir
1708         shadow:basedir = $shadow_basedir
1709         shadow:snapdir = $shadow_basedir/.snapshots
1710         shadow:format = \@GMT-%Y.%m.%d-%H.%M.%S
1711
1712 [shadow_fmt1]
1713         comment = Testing shadow:format with only date component
1714         vfs object = shadow_copy2
1715         path = $shadow_shrdir
1716         read only = no
1717         guest ok = yes
1718         shadow:mountpoint = $shadow_mntdir
1719         shadow:basedir = $shadow_basedir
1720         shadow:snapdir = $shadow_basedir/.snapshots
1721         shadow:format = \@GMT-%Y-%m-%d
1722
1723 [shadow_fmt2]
1724         comment = Testing shadow:format with some hardcoded prefix
1725         vfs object = shadow_copy2
1726         path = $shadow_shrdir
1727         read only = no
1728         guest ok = yes
1729         shadow:mountpoint = $shadow_mntdir
1730         shadow:basedir = $shadow_basedir
1731         shadow:snapdir = $shadow_basedir/.snapshots
1732         shadow:format = snap\@GMT-%Y.%m.%d-%H.%M.%S
1733
1734 [shadow_fmt3]
1735         comment = Testing shadow:format with modified format
1736         vfs object = shadow_copy2
1737         path = $shadow_shrdir
1738         read only = no
1739         guest ok = yes
1740         shadow:mountpoint = $shadow_mntdir
1741         shadow:basedir = $shadow_basedir
1742         shadow:snapdir = $shadow_basedir/.snapshots
1743         shadow:format = \@GMT-%Y.%m.%d-%H_%M_%S-snap
1744
1745 [shadow_fmt4]
1746         comment = Testing shadow:snapprefix regex
1747         vfs object = shadow_copy2
1748         path = $shadow_shrdir
1749         read only = no
1750         guest ok = yes
1751         shadow:mountpoint = $shadow_mntdir
1752         shadow:basedir = $shadow_basedir
1753         shadow:snapdir = $shadow_basedir/.snapshots
1754         shadow:snapprefix = \^s[a-z]*p\$
1755         shadow:format = _GMT-%Y.%m.%d-%H.%M.%S
1756
1757 [shadow_fmt5]
1758         comment = Testing shadow:snapprefix with delim regex
1759         vfs object = shadow_copy2
1760         path = $shadow_shrdir
1761         read only = no
1762         guest ok = yes
1763         shadow:mountpoint = $shadow_mntdir
1764         shadow:basedir = $shadow_basedir
1765         shadow:snapdir = $shadow_basedir/.snapshots
1766         shadow:delimiter = \@GMT
1767         shadow:snapprefix = [a-z]*
1768         shadow:format = \@GMT-%Y.%m.%d-%H.%M.%S
1769
1770 [shadow_wl]
1771         path = $shadow_shrdir
1772         comment = previous versions with wide links allowed
1773         vfs objects = shadow_copy2
1774         shadow:mountpoint = $shadow_mntdir
1775         wide links = yes
1776 [dfq]
1777         path = $shrdir/dfree
1778         vfs objects = fake_dfq
1779         admin users = $unix_name
1780         include = $dfqconffile
1781         ";
1782         close(CONF);
1783
1784         unless (open(DFQCONF, ">$dfqconffile")) {
1785                 warn("Unable to open $dfqconffile");
1786                 return undef;
1787         }
1788         close(DFQCONF);
1789
1790         ##
1791         ## create a test account
1792         ##
1793
1794         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
1795            warn("Unable to open $nss_wrapper_passwd");
1796            return undef;
1797         }
1798         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
1799 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
1800 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1801 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1802 userdup:x:$uid_userdup:$gid_userdup:userdup gecos:$prefix_abs:/bin/false
1803 pdbtest_wkn:x:$uid_pdbtest_wkn:$gid_everyone:pdbtest_wkn gecos:$prefix_abs:/bin/false
1804 force_user:x:$uid_force_user:$gid_force_user:force user gecos:$prefix_abs:/bin/false
1805 smbget_user:x:$uid_smbget:$gid_domusers:smbget_user gecos:$prefix_abs:/bin/false
1806 ";
1807         if ($unix_uid != 0) {
1808                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
1809 ";
1810         }
1811         close(PASSWD);
1812
1813         unless (open(GROUP, ">$nss_wrapper_group")) {
1814              warn("Unable to open $nss_wrapper_group");
1815              return undef;
1816         }
1817         print GROUP "nobody:x:$gid_nobody:
1818 nogroup:x:$gid_nogroup:nobody
1819 $unix_name-group:x:$unix_gids[0]:
1820 domusers:X:$gid_domusers:
1821 domadmins:X:$gid_domadmins:
1822 userdup:x:$gid_userdup:$unix_name
1823 everyone:x:$gid_everyone:
1824 force_user:x:$gid_force_user:
1825 ";
1826         if ($unix_gids[0] != 0) {
1827                 print GROUP "root:x:$gid_root:
1828 ";
1829         }
1830
1831         close(GROUP);
1832
1833         ## hosts
1834         my $hostname = lc($server);
1835         unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
1836                 warn("Unable to open $nss_wrapper_hosts");
1837                 return undef;
1838         }
1839         print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
1840         print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
1841         close(HOSTS);
1842
1843         ## hosts
1844         unless (open(RESOLV_CONF, ">$resolv_conf")) {
1845                 warn("Unable to open $resolv_conf");
1846                 return undef;
1847         }
1848         if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
1849                 if (defined($dc_server_ip)) {
1850                         print RESOLV_CONF "nameserver $dc_server_ip\n";
1851                 }
1852                 if (defined($dc_server_ipv6)) {
1853                         print RESOLV_CONF "nameserver $dc_server_ipv6\n";
1854                 }
1855         } else {
1856                 print RESOLV_CONF "nameserver ${server_ip}\n";
1857                 print RESOLV_CONF "nameserver ${server_ipv6}\n";
1858         }
1859         close(RESOLV_CONF);
1860
1861         foreach my $evlog (@eventlog_list) {
1862                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
1863                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
1864                 close(EVENTLOG);
1865         }
1866
1867         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1868         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1869         $ENV{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1870         $ENV{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1871         if ($ENV{SAMBA_DNS_FAKING}) {
1872                 $ENV{RESOLV_WRAPPER_CONF} = $resolv_conf;
1873         } else {
1874                 $ENV{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1875         }
1876
1877         createuser($self, $unix_name, $password, $conffile) || die("Unable to create user");
1878         createuser($self, "force_user", $password, $conffile) || die("Unable to create force_user");
1879         createuser($self, "smbget_user", $password, $conffile) || die("Unable to create smbget_user");
1880
1881         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
1882         print DNS_UPDATE_LIST "A $server. $server_ip\n";
1883         print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
1884         close(DNS_UPDATE_LIST);
1885
1886         $ret{SERVER_IP} = $server_ip;
1887         $ret{SERVER_IPV6} = $server_ipv6;
1888         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
1889         $ret{NMBD_TEST_LOG_POS} = 0;
1890         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
1891         $ret{WINBINDD_TEST_LOG_POS} = 0;
1892         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
1893         $ret{SMBD_TEST_LOG_POS} = 0;
1894         $ret{SERVERCONFFILE} = $conffile;
1895         $ret{CONFIGURATION} ="-s $conffile";
1896         $ret{SERVER} = $server;
1897         $ret{USERNAME} = $unix_name;
1898         $ret{USERID} = $unix_uid;
1899         $ret{DOMAIN} = $domain;
1900         $ret{NETBIOSNAME} = $server;
1901         $ret{PASSWORD} = $password;
1902         $ret{PIDDIR} = $piddir;
1903         $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
1904         $ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
1905         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
1906         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
1907         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1908         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1909         $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1910         $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1911         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
1912         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
1913         if ($ENV{SAMBA_DNS_FAKING}) {
1914                 $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1915         } else {
1916                 $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
1917         }
1918         $ret{LOCAL_PATH} = "$shrdir";
1919         $ret{LOGDIR} = $logdir;
1920
1921         #
1922         # Avoid hitting system krb5.conf -
1923         # An env that needs Kerberos will reset this to the real
1924         # value.
1925         #
1926         $ret{KRB5_CONFIG} = abs_path($prefix) . "/no_krb5.conf";
1927
1928         return \%ret;
1929 }
1930
1931 sub wait_for_start($$$$$)
1932 {
1933         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
1934         my $ret;
1935
1936         if ($nmbd eq "yes") {
1937                 my $count = 0;
1938
1939                 # give time for nbt server to register its names
1940                 print "checking for nmbd\n";
1941
1942                 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
1943                 my $nmblookup = Samba::bindir_path($self, "nmblookup");
1944
1945                 do {
1946                         $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
1947                         if ($ret != 0) {
1948                                 sleep(1);
1949                         } else {
1950                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
1951                                 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
1952                                 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
1953                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
1954                         }
1955                         $count++;
1956                 } while ($ret != 0 && $count < 10);
1957                 if ($count == 10) {
1958                         print "NMBD not reachable after 10 retries\n";
1959                         teardown_env($self, $envvars);
1960                         return 0;
1961                 }
1962         }
1963
1964         if ($winbindd eq "yes") {
1965             print "checking for winbindd\n";
1966             my $count = 0;
1967             do {
1968                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --ping-dc");
1969                 if ($ret != 0) {
1970                     sleep(1);
1971                 }
1972                 $count++;
1973             } while ($ret != 0 && $count < 20);
1974             if ($count == 20) {
1975                 print "WINBINDD not reachable after 20 seconds\n";
1976                 teardown_env($self, $envvars);
1977                 return 0;
1978             }
1979         }
1980
1981         if ($smbd eq "yes") {
1982             # make sure smbd is also up set
1983             print "wait for smbd\n";
1984
1985             my $count = 0;
1986             do {
1987                 $ret = system(Samba::bindir_path($self, "smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
1988                 if ($ret != 0) {
1989                     sleep(1);
1990                 }
1991                 $count++
1992             } while ($ret != 0 && $count < 20);
1993             if ($count == 20) {
1994                 print "SMBD failed to start up in a reasonable time (20sec)\n";
1995                 teardown_env($self, $envvars);
1996                 return 0;
1997             }
1998         }
1999
2000         # Ensure we have domain users mapped.
2001         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
2002         if ($ret != 0) {
2003             return 1;
2004         }
2005         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
2006         if ($ret != 0) {
2007             return 1;
2008         }
2009         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add sid=S-1-1-0 unixgroup=everyone type=builtin");
2010         if ($ret != 0) {
2011             return 1;
2012         }
2013
2014         if ($winbindd eq "yes") {
2015             # note: creating builtin groups requires winbindd for the
2016             # unix id allocator
2017             $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
2018             if ($ret != 0) {
2019                 print "Failed to create BUILTIN\\Users group\n";
2020                 return 0;
2021             }
2022             my $count = 0;
2023             do {
2024                 system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache flush");
2025                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
2026                 if ($ret != 0) {
2027                     sleep(2);
2028                 }
2029                 $count++;
2030             } while ($ret != 0 && $count < 10);
2031             if ($count == 10) {
2032                 print "WINBINDD not reachable after 20 seconds\n";
2033                 teardown_env($self, $envvars);
2034                 return 0;
2035             }
2036         }
2037
2038         print $self->getlog_env($envvars);
2039
2040         return 1;
2041 }
2042
2043 1;