#!/bin/sh
# script to manage the lvs ip multiplexer for a single public address cluster

. $CTDB_BASE/functions
loadconfig ctdb

[ -z "$CTDB_LVS_PUBLIC_IP" ] && exit 0
[ -z "$CTDB_PUBLIC_INTERFACE" ] && exit 0

[ -x /sbin/ipvsadm ] || {
    echo "LVS configured but /sbin/ipvsadm is not installed."
    exit 1
}


cmd="$1"
shift

PATH=/usr/bin:/bin:/usr/sbin:/sbin:$PATH

case $cmd in 
     startup)
	ipvsadm -D -t $CTDB_LVS_PUBLIC_IP:0
	ipvsadm -D -u $CTDB_LVS_PUBLIC_IP:0

	ip addr add $CTDB_LVS_PUBLIC_IP/32 dev lo scope host >/dev/null 2>/dev/null

	# do not respond to ARPs that are for ip addresses with scope 'host'
	echo 3 > /proc/sys/net/ipv4/conf/all/arp_ignore
	# do not send out arp requests from loopback addresses
	echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce
	;;

     shutdown)
	ipvsadm -D -t $CTDB_LVS_PUBLIC_IP:0
	ipvsadm -D -u $CTDB_LVS_PUBLIC_IP:0

	# remove the ip
	ip addr del $CTDB_LVS_PUBLIC_IP/32 dev lo >/dev/null 2>/dev/null

	# flush our route cache
	echo 1 > /proc/sys/net/ipv4/route/flush
	;;

     takeip)
	;;

     releaseip)
	;;

     recovered)
	# kill off any tcp connections
	ipvsadm -D -t $CTDB_LVS_PUBLIC_IP:0
	ipvsadm -D -u $CTDB_LVS_PUBLIC_IP:0
	kill_tcp_connections $CTDB_LVS_PUBLIC_IP

	# are we the recmaster ? 
	ctdb isnotrecmaster >/dev/null 2>/dev/null || {
	    # change the ip address to have scope host so we wont respond
	    # to arps
	    ip addr del $CTDB_LVS_PUBLIC_IP/32 dev lo >/dev/null 2>/dev/null
	    ip addr add $CTDB_LVS_PUBLIC_IP/32 dev lo scope host >/dev/null 2>/dev/null
	    exit 0
	}

	# change the scope so we start responding to arps
	ip addr del $CTDB_LVS_PUBLIC_IP/32 dev lo >/dev/null 2>/dev/null
	ip addr add $CTDB_LVS_PUBLIC_IP/32 dev lo >/dev/null 2>/dev/null

	ipvsadm -A -t $CTDB_LVS_PUBLIC_IP:0 -p 9999 -s lc
	ipvsadm -A -u $CTDB_LVS_PUBLIC_IP:0 -p 9999 -s lc

	ctdb status 2>/dev/null | egrep "^pnn:" | grep -v DISCONNECTED | grep -v "(THIS NODE)" | sed -e "s/^pnn:[0-9]* //" -e "s/[ 	].*//" | while read IP; do
		ipvsadm -a -t $CTDB_LVS_PUBLIC_IP:0 -r $IP -g
		ipvsadm -a -u $CTDB_LVS_PUBLIC_IP:0 -r $IP -g
	done
	ipvsadm -a -t $CTDB_LVS_PUBLIC_IP:0 -r 127.0.0.1
	ipvsadm -a -u $CTDB_LVS_PUBLIC_IP:0 -r 127.0.0.1

	# send out a gratious arp so our peers will update their arp tables
	ctdb gratiousarp $CTDB_LVS_PUBLIC_IP $CTDB_PUBLIC_INTERFACE >/dev/null 2>/dev/null

	# flush our route cache
	echo 1 > /proc/sys/net/ipv4/route/flush
	;;

      monitor)
	;;

esac

exit 0