# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# To set up Qt, set TOOLKIT to qt
-# To set up GTK+ 3, set TOOLKIT to gtk3
-# To set up GTK+ 2, set TOOLKIT to gtk2
-#
-TOOLKIT=gtk3
-
#
# To build cmake
# CMAKE=1
#
# and change "macx-clang" to "macx-clang-32" in the line below.
#
+# Note: when building against the 10.6 SDK, clang fails, because there's
+# a missing libstdc++.dylib in the SDK; this does not bother g++, however.
+#
+#TARGET_PLATFORM=macx-g++
TARGET_PLATFORM=macx-clang
#
-# Versions to download and install.
+# Versions of packages to download and install.
+#
+
+#
+# Some packages need xz to unpack their current source.
+# xz is not yet provided with OS X.
+#
+XZ_VERSION=5.0.4
+
+#
+# In case we want to build with cmake.
+#
+CMAKE_VERSION=2.8.10.2
+
#
-# The following libraries and tools are required.
+# The following libraries and tools are required even to build only TShark.
#
GETTEXT_VERSION=0.18.2
GLIB_VERSION=2.36.0
PKG_CONFIG_VERSION=0.28
-case "$TOOLKIT" in
-qt)
- QT_VERSION=5.1.1
- ;;
-gtk*)
+#
+# One or more of the following libraries are required to build Wireshark.
+#
+# If you don't want to build with Qt, comment out the QT_VERSION= line.
+#
+# If you want to build with GTK+ 2, comment out the GTK_VERSION=3.* line
+# and un-comment the GTK_VERSION=2.* line.
+#
+# If you don't want to build with GTK+ at all, comment out both lines.
+#
+#QT_VERSION=5.1.1
+QT_VERSION=5.2.0
+GTK_VERSION=2.24.17
+#GTK_VERSION=3.5.2
+if [ "$GTK_VERSION" ]; then
+ #
+ # We'll be building GTK+, so we need some additional libraries.
+ #
+ GTK_MAJOR_VERSION="`expr $GTK_VERSION : '\([0-9][0-9]*\).*'`"
+ GTK_MINOR_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ GTK_DOTDOT_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+
ATK_VERSION=2.8.0
PANGO_VERSION=1.30.1
PNG_VERSION=1.5.17
PIXMAN_VERSION=0.26.0
CAIRO_VERSION=1.12.2
GDK_PIXBUF_VERSION=2.28.0
- if [ "$TOOLKIT" = gtk2 ]; then
- GTK_VERSION=2.24.17
- else
- GTK_VERSION=3.5.2
- fi
- ;;
-esac
-
-#
-# Some package need xz to unpack their current source.
-# xz is not yet provided with OS X.
-#
-XZ_VERSION=5.0.4
-
-# In case we want to build with cmake
-CMAKE_VERSION=2.8.10.2
+fi
#
# The following libraries are optional.
rm libpng-$installed_libpng_version-done
fi
+ installed_qt_version=`ls qt-*-done 2>/dev/null | sed 's/qt-\(.*\)-done/\1/'`
+ if [ ! -z "$installed_qt_version" ] ; then
+ echo "Uninstalling Qt:"
+ cd qt-everywhere-opensource-src-$installed_qt_version
+ $DO_MAKE_UNINSTALL || exit 1
+ #
+ # XXX - "make distclean" doesn't work. qmake sure does a
+ # good job of constructing Makefiles that work correctly....
+ #
+ #make distclean || exit 1
+ cd ..
+ rm qt-$installed_qt_version-done
+ fi
+
installed_glib_version=`ls glib-*-done 2>/dev/null | sed 's/glib-\(.*\)-done/\1/'`
if [ ! -z "$installed_glib_version" ] ; then
echo "Uninstalling GLib:"
exit 0
fi
+#
+# Configure scripts tend to set CFLAGS and CXXFLAGS to "-g -O2" if
+# invoked without CFLAGS or CXXFLAGS being set in the environment.
+#
+# However, we *are* setting them in the environment, for our own
+# nefarious purposes, so start them out as "-g -O2".
+#
+CFLAGS="-g -O2"
+CXXFLAGS="-g -O2"
+
#
# To make this work on Leopard (rather than working *on* Snow Leopard
# when building *for* Leopard) will take more work.
# causes some BPF functions not to work with 64-bit userland
# code, so capturing won't work.
#
- export CFLAGS="$CFLAGS -arch i386"
- export CXXFLAGS="$CXXFLAGS -arch i386"
+ CFLAGS="$CFLAGS -arch i386"
+ CXXFLAGS="$CXXFLAGS -arch i386"
export LDFLAGS="$LDFLAGS -arch i386"
fi
fi
+export CFLAGS
+export CXXFLAGS
+
#
# You need Xcode or the command-line tools installed to get the compilers.
#
exit 1
fi
-if [[ $TOOLKIT = qt ]]; then
+if [ "$QT_VERSION" ]; then
#
# We need Xcode, not just the command-line tools, installed to build
# Qt.
echo "The command-line build tools are not sufficient to build Qt."
exit 1
fi
-else
+fi
+if [ "$GTK_VERSION" ]; then
#
# If we're building with GTK+, you also need the X11 SDK; with at least
# some versions of OS X and Xcode, that is, I think, an optional install.
# And, what's worse, at least with the version of Xcode that comes
# with Leopard, /usr/include/ffi/fficonfig.h doesn't define MACOSX,
# which causes the build of GLib to fail. If we don't find
- # "#define.*MACOSX" in /usr/include/ffi/fficonfig.h, explictly
+ # "#define.*MACOSX" in /usr/include/ffi/fficonfig.h, explicitly
# define it.
#
# While we're at it, suppress -Wformat-nonliteral to avoid a case
# Now we have reached a point where we can build everything but
# the GUI (Wireshark).
#
-case "$TOOLKIT" in
-qt)
- if [ ! -f qt-$QT_VERSION-done ] ; then
- echo "Downloading, building, and installing Qt:"
- QT_MAJOR_VERSION="`expr $QT_VERSION : '\([0-9][0-9]*\).*'`"
- QT_MINOR_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
- QT_DOTDOT_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
- QT_MAJOR_MINOR_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION
- #
- # What you get for this URL might just be a 302 Found reply, so use
- # -L so we get redirected.
- #
- curl -L -O http://download.qt-project.org/official_releases/qt/$QT_MAJOR_MINOR_VERSION/$QT_VERSION/single/qt-everywhere-opensource-src-$QT_VERSION.tar.gz
- #
- # Qt 5.1.x sets QMAKE_MACOSX_DEPLOYMENT_TARGET = 10.6
- # in qtbase/mkspecs/$TARGET_PLATFORM/qmake.conf
- # We may need to adjust this manually in the future.
- #
- # The -no-c++11 flag is needed to work around
- # https://bugreports.qt-project.org/browse/QTBUG-30487
- #
- tar xf qt-everywhere-opensource-src-$QT_VERSION.tar.gz
- cd qt-everywhere-opensource-src-$QT_VERSION
- ./configure -sdk macosx$min_osx_target -platform $TARGET_PLATFORM -opensource -confirm-license -no-c++11
- make || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
- touch qt-$QT_VERSION-done
- fi
- ;;
+if [ "$QT_VERSION" -a ! -f qt-$QT_VERSION-done ]; then
+ echo "Downloading, building, and installing Qt:"
+ QT_MAJOR_VERSION="`expr $QT_VERSION : '\([0-9][0-9]*\).*'`"
+ QT_MINOR_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ QT_DOTDOT_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ QT_MAJOR_MINOR_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION
+ #
+ # What you get for this URL might just be a 302 Found reply, so use
+ # -L so we get redirected.
+ #
+ curl -L -O http://download.qt-project.org/official_releases/qt/$QT_MAJOR_MINOR_VERSION/$QT_VERSION/single/qt-everywhere-opensource-src-$QT_VERSION.tar.gz
+ #
+ # Qt 5.1.x sets QMAKE_MACOSX_DEPLOYMENT_TARGET = 10.6
+ # in qtbase/mkspecs/$TARGET_PLATFORM/qmake.conf
+ # We may need to adjust this manually in the future.
+ #
+ # The -no-c++11 flag is needed to work around
+ # https://bugreports.qt-project.org/browse/QTBUG-30487
+ #
+ tar xf qt-everywhere-opensource-src-$QT_VERSION.tar.gz
+ cd qt-everywhere-opensource-src-$QT_VERSION
+ #
+ # We don't build Qt in its Full Shining Glory, as we don't need all
+ # of its components, and it takes *forever* to build in that form.
+ #
+ # Qt 5.2.0 beta1 fails to build on OS X without -no-xcb due to bug
+ # QTBUG-34382.
+ #
+ # Qt 5.x fails to build on OS X with -no-opengl due to bug
+ # QTBUG-31151.
+ #
+ ./configure -v -sdk macosx$min_osx_target -platform $TARGET_PLATFORM \
+ -opensource -confirm-license -no-c++11 -no-dbus \
+ -no-sql-sqlite -no-xcb -nomake examples \
+ -skip qtdoc -skip qtquickcontrols -skip qtwebkit \
+ -skip qtwebkit-examples -skip qtxmlpatterns
+ make || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch qt-$QT_VERSION-done
+fi
-gtk*)
+if [ "$GTK_VERSION" ]; then
#
# GTK+ 3 requires a newer Cairo build than the one that comes with
# 10.6, so we build Cairo if we are using GTK+ 3.
# again, if we build with "native" GTK+, we'd have to build and install
# it.
#
- if [[ "$TOOLKIT" = gtk3 || "$cairo_not_in_the_os" = yes ]]; then
+ if [[ "$GTK_MAJOR_VERSION" -eq 3 || "$cairo_not_in_the_os" = yes ]]; then
#
# Requirements for Cairo first
#
- # The libpng that comes with the X11 for leopard has a bogus
+ # The libpng that comes with the X11 for Leopard has a bogus
# pkg-config file that lies about where the header files are,
# which causes other packages not to be able to find its
# headers.
#
-# if [ ! -f libpng-$PNG_VERSION-done ] ; then
-# echo "Downloading, building, and installing libpng:"
-# #
-# # The FTP site puts libpng x.y.* into a libpngxy directory.
-# #
-# subdir=`echo $PNG_VERSION | sed 's/\([1-9][0-9]*\)\.\([1-9][0-9]*\).*/libpng\1\2'/`
-# [ -f libpng-$PNG_VERSION.tar.xz ] || curl -O ftp://ftp.simplesystems.org/pub/libpng/png/src/$subdir/libpng-$PNG_VERSION.tar.xz
-# xzcat libpng-$PNG_VERSION.tar.xz | tar xf - || exit 1
-# cd libpng-$PNG_VERSION
-# CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
-# make $MAKE_BUILD_OPTS || exit 1
-# $DO_MAKE_INSTALL || exit 1
-# cd ..
-# touch libpng-$PNG_VERSION-done
-# fi
+ # The libpng in later versions is not what the version of
+ # libpixman we build below wants - it wants libpng15.
+ #
+ if [ ! -f libpng-$PNG_VERSION-done ] ; then
+ echo "Downloading, building, and installing libpng:"
+ #
+ # The FTP site puts libpng x.y.* into a libpngxy directory.
+ #
+ subdir=`echo $PNG_VERSION | sed 's/\([1-9][0-9]*\)\.\([1-9][0-9]*\).*/libpng\1\2'/`
+ [ -f libpng-$PNG_VERSION.tar.xz ] || curl -O ftp://ftp.simplesystems.org/pub/libpng/png/src/$subdir/libpng-$PNG_VERSION.tar.xz
+ xzcat libpng-$PNG_VERSION.tar.xz | tar xf - || exit 1
+ cd libpng-$PNG_VERSION
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch libpng-$PNG_VERSION-done
+ fi
#
- # The libpixman that comes with the X11 for Leopard is too old
- # to support Cairo's image surface backend feature (which requires
- # pixman-1 >= 0.22.0).
+ # The libpixman versions that come with the X11s for Leopard,
+ # Snow Leopard, and Lion is too old to support Cairo's image
+ # surface backend feature (which requires pixman-1 >= 0.22.0).
#
-# if [ ! -f pixman-$PIXMAN_VERSION-done ] ; then
-# echo "Downloading, building, and installing pixman:"
-# [ -f pixman-$PIXMAN_VERSION.tar.gz ] || curl -O http://www.cairographics.org/releases/pixman-$PIXMAN_VERSION.tar.gz
-# gzcat pixman-$PIXMAN_VERSION.tar.gz | tar xf - || exit 1
-# cd pixman-$PIXMAN_VERSION
-# CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
-# make $MAKE_BUILD_OPTS || exit 1
-# $DO_MAKE_INSTALL || exit 1
-# cd ..
-# touch pixman-$PIXMAN_VERSION-done
-# fi
+ # XXX - what about the one that comes with the latest version
+ # of Xquartz?
+ #
+ if [ ! -f pixman-$PIXMAN_VERSION-done ] ; then
+ echo "Downloading, building, and installing pixman:"
+ [ -f pixman-$PIXMAN_VERSION.tar.gz ] || curl -O http://www.cairographics.org/releases/pixman-$PIXMAN_VERSION.tar.gz
+ gzcat pixman-$PIXMAN_VERSION.tar.gz | tar xf - || exit 1
+ cd pixman-$PIXMAN_VERSION
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
+ make V=1 $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch pixman-$PIXMAN_VERSION-done
+ fi
#
# And now Cairo itself.
+ # XXX - with the libxcb that comes with 10.6,
+ #
+ # xcb_discard_reply() is missing, and the build fails.
#
if [ ! -f cairo-$CAIRO_VERSION-done ] ; then
echo "Downloading, building, and installing Cairo:"
if [ ! -f gtk+-$GTK_VERSION-done ] ; then
echo "Downloading, building, and installing GTK+:"
gtk_dir=`expr $GTK_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
- GTK_MAJOR_VERSION="`expr $GTK_VERSION : '\([0-9][0-9]*\).*'`"
- GTK_MINOR_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
- GTK_DOTDOT_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
if [[ $GTK_MAJOR_VERSION -gt 2 ||
$GTK_MINOR_VERSION -gt 24 ||
($GTK_MINOR_VERSION -eq 24 && $GTK_DOTDOT_VERSION -ge 5) ]]
cd ..
touch gtk+-$GTK_VERSION-done
fi
- ;;
-esac
+fi
#
# Now we have reached a point where we can build everything including
git.samba.org / metze / wireshark / wip.git / blobdiff