# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
-# To set up a GTK3 environment
-GTK3=1
# To build cmake
# CMAKE=1
#
# To build all libraries as 32-bit libraries uncomment the following three lines.
+#
# export CFLAGS="$CFLAGS -arch i386"
# export CXXFLAGS="$CXXFLAGS -arch i386"
# export LDFLAGS="$LDFLAGS -arch i386"
#
+# and change "macx-clang" to "macx-clang-32" in the line below.
+#
+# Note: when building against the 10.6 SDK, clang fails, because there's
+# a missing libstdc++.dylib in the SDK; this does not bother g++, however.
+#
+#TARGET_PLATFORM=macx-g++
+TARGET_PLATFORM=macx-clang
#
-# Versions to download and install.
+# Versions of packages to download and install.
#
-# The following libraries and tools are required.
+
+#
+# Some packages need xz to unpack their current source.
+# xz is not yet provided with OS X.
+#
+XZ_VERSION=5.0.4
+
+#
+# In case we want to build with cmake.
+#
+CMAKE_VERSION=2.8.10.2
+
+#
+# The following libraries and tools are required even to build only TShark.
#
GETTEXT_VERSION=0.18.2
GLIB_VERSION=2.36.0
PKG_CONFIG_VERSION=0.28
-ATK_VERSION=2.8.0
-PANGO_VERSION=1.30.1
-PNG_VERSION=1.5.17
-PIXMAN_VERSION=0.26.0
-CAIRO_VERSION=1.12.2
-GDK_PIXBUF_VERSION=2.28.0
-if [ -z "$GTK3" ]; then
- GTK_VERSION=2.24.17
-else
- GTK_VERSION=3.5.2
-fi
#
-# Some package need xz to unpack their current source.
-# xz is not yet provided with OS X.
+# One or more of the following libraries are required to build Wireshark.
#
-XZ_VERSION=5.0.4
+# If you don't want to build with Qt, comment out the QT_VERSION= line.
+#
+# If you want to build with GTK+ 2, comment out the GTK_VERSION=3.* line
+# and un-comment the GTK_VERSION=2.* line.
+#
+# If you don't want to build with GTK+ at all, comment out both lines.
+#
+#QT_VERSION=5.1.1
+QT_VERSION=5.2.0
+GTK_VERSION=2.24.17
+#GTK_VERSION=3.5.2
+if [ "$GTK_VERSION" ]; then
+ #
+ # We'll be building GTK+, so we need some additional libraries.
+ #
+ GTK_MAJOR_VERSION="`expr $GTK_VERSION : '\([0-9][0-9]*\).*'`"
+ GTK_MINOR_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ GTK_DOTDOT_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
-# In case we want to build with cmake
-CMAKE_VERSION=2.8.10.2
+ ATK_VERSION=2.8.0
+ PANGO_VERSION=1.30.1
+ PNG_VERSION=1.5.17
+ PIXMAN_VERSION=0.26.0
+ CAIRO_VERSION=1.12.2
+ GDK_PIXBUF_VERSION=2.28.0
+fi
#
# The following libraries are optional.
#
GEOIP_VERSION=1.4.8
+CARES_VERSION=1.10.0
+
DARWIN_MAJOR_VERSION=`uname -r | sed 's/\([0-9]*\).*/\1/'`
#
# We also do a "make distclean", so that we don't have leftovers from
# old configurations.
#
+
+ installed_cares_version=`ls cares-*-done 2>/dev/null | sed 's/cares-\(.*\)-done/\1/'`
+ if [ ! -z "$installed_cares_version" ] ; then
+ echo "Uninstalling C-Ares API:"
+ cd cares-$installed_cares_version
+ $DO_MAKE_UNINSTALL || exit 1
+ make distclean || exit 1
+ cd ..
+ rm cares-$installed_cares_version-done
+ fi
+
installed_geoip_version=`ls geoip-*-done 2>/dev/null | sed 's/geoip-\(.*\)-done/\1/'`
if [ ! -z "$installed_geoip_version" ] ; then
echo "Uninstalling GeoIP API:"
rm libpng-$installed_libpng_version-done
fi
+ installed_qt_version=`ls qt-*-done 2>/dev/null | sed 's/qt-\(.*\)-done/\1/'`
+ if [ ! -z "$installed_qt_version" ] ; then
+ echo "Uninstalling Qt:"
+ cd qt-everywhere-opensource-src-$installed_qt_version
+ $DO_MAKE_UNINSTALL || exit 1
+ #
+ # XXX - "make distclean" doesn't work. qmake sure does a
+ # good job of constructing Makefiles that work correctly....
+ #
+ #make distclean || exit 1
+ cd ..
+ rm qt-$installed_qt_version-done
+ fi
+
installed_glib_version=`ls glib-*-done 2>/dev/null | sed 's/glib-\(.*\)-done/\1/'`
if [ ! -z "$installed_glib_version" ] ; then
echo "Uninstalling GLib:"
exit 0
fi
+#
+# Configure scripts tend to set CFLAGS and CXXFLAGS to "-g -O2" if
+# invoked without CFLAGS or CXXFLAGS being set in the environment.
+#
+# However, we *are* setting them in the environment, for our own
+# nefarious purposes, so start them out as "-g -O2".
+#
+CFLAGS="-g -O2"
+CXXFLAGS="-g -O2"
+
#
# To make this work on Leopard (rather than working *on* Snow Leopard
# when building *for* Leopard) will take more work.
# causes some BPF functions not to work with 64-bit userland
# code, so capturing won't work.
#
- export CFLAGS="$CFLAGS -arch i386"
- export CXXFLAGS="$CXXFLAGS -arch i386"
+ CFLAGS="$CFLAGS -arch i386"
+ CXXFLAGS="$CXXFLAGS -arch i386"
export LDFLAGS="$LDFLAGS -arch i386"
fi
fi
+export CFLAGS
+export CXXFLAGS
+
#
-# You need Xcode installed to get the compilers.
+# You need Xcode or the command-line tools installed to get the compilers.
#
if [ ! -x /usr/bin/xcodebuild ]; then
echo "Please install Xcode first (should be available on DVD or from http://developer.apple.com/xcode/index.php)."
exit 1
fi
-#
-# You also need the X11 SDK; with at least some versions of OS X and
-# Xcode, that is, I think, an optional install. (Or it might be
-# installed with X11, but I think *that* is an optional install on
-# at least some versions of OS X.)
-#
-if [ ! -d /usr/X11/include ]; then
- echo "Please install X11 and the X11 SDK first."
- exit 1
+if [ "$QT_VERSION" ]; then
+ #
+ # We need Xcode, not just the command-line tools, installed to build
+ # Qt.
+ #
+ if ! /usr/bin/xcrun -find xcrun >/dev/null 2>&1; then
+ echo "Please install Xcode first (should be available on DVD or from http://developer.apple.com/xcode/index.php)."
+ echo "The command-line build tools are not sufficient to build Qt."
+ exit 1
+ fi
+fi
+if [ "$GTK_VERSION" ]; then
+ #
+ # If we're building with GTK+, you also need the X11 SDK; with at least
+ # some versions of OS X and Xcode, that is, I think, an optional install.
+ # (Or it might be installed with X11, but I think *that* is an optional
+ # install on at least some versions of OS X.)
+ #
+ if [ ! -d /usr/X11/include ]; then
+ echo "Please install X11 and the X11 SDK first."
+ exit 1
+ fi
fi
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/X11/lib/pkgconfig
# And, what's worse, at least with the version of Xcode that comes
# with Leopard, /usr/include/ffi/fficonfig.h doesn't define MACOSX,
# which causes the build of GLib to fail. If we don't find
- # "#define.*MACOSX" in /usr/include/ffi/fficonfig.h, explictly
+ # "#define.*MACOSX" in /usr/include/ffi/fficonfig.h, explicitly
# define it.
#
# While we're at it, suppress -Wformat-nonliteral to avoid a case
# Now we have reached a point where we can build everything but
# the GUI (Wireshark).
#
-# GTK+ 3 requires a newer Cairo build than the one that comes with
-# 10.6, so we build Cairo if we are using GTK+ 3.
-#
-# In 10.6 and 10.7, it's an X11 library; if we build with "native" GTK+
-# rather than X11 GTK+, we might have to build and install Cairo.
-# In 10.8 and later, there is no X11, but it's included in Xquartz;
-# again, if we build with "native" GTK+, we'd have to build and install
-# it.
-#
-if [[ -n "$GTK3" || "$cairo_not_in_the_os" = yes ]]; then
+if [ "$QT_VERSION" -a ! -f qt-$QT_VERSION-done ]; then
+ echo "Downloading, building, and installing Qt:"
+ QT_MAJOR_VERSION="`expr $QT_VERSION : '\([0-9][0-9]*\).*'`"
+ QT_MINOR_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ QT_DOTDOT_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ QT_MAJOR_MINOR_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION
#
- # Requirements for Cairo first
+ # What you get for this URL might just be a 302 Found reply, so use
+ # -L so we get redirected.
#
- # The libpng that comes with the X11 for leopard has a bogus
- # pkg-config file that lies about where the header files are,
- # which causes other packages not to be able to find its
- # headers.
+ curl -L -O http://download.qt-project.org/official_releases/qt/$QT_MAJOR_MINOR_VERSION/$QT_VERSION/single/qt-everywhere-opensource-src-$QT_VERSION.tar.gz
#
-# if [ ! -f libpng-$PNG_VERSION-done ] ; then
-# echo "Downloading, building, and installing libpng:"
-# #
-# # The FTP site puts libpng x.y.* into a libpngxy directory.
-# #
-# subdir=`echo $PNG_VERSION | sed 's/\([1-9][0-9]*\)\.\([1-9][0-9]*\).*/libpng\1\2'/`
-# [ -f libpng-$PNG_VERSION.tar.xz ] || curl -O ftp://ftp.simplesystems.org/pub/libpng/png/src/$subdir/libpng-$PNG_VERSION.tar.xz
-# xzcat libpng-$PNG_VERSION.tar.xz | tar xf - || exit 1
-# cd libpng-$PNG_VERSION
-# CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
-# make $MAKE_BUILD_OPTS || exit 1
-# $DO_MAKE_INSTALL || exit 1
-# cd ..
-# touch libpng-$PNG_VERSION-done
-# fi
-
+ # Qt 5.1.x sets QMAKE_MACOSX_DEPLOYMENT_TARGET = 10.6
+ # in qtbase/mkspecs/$TARGET_PLATFORM/qmake.conf
+ # We may need to adjust this manually in the future.
+ #
+ # The -no-c++11 flag is needed to work around
+ # https://bugreports.qt-project.org/browse/QTBUG-30487
+ #
+ tar xf qt-everywhere-opensource-src-$QT_VERSION.tar.gz
+ cd qt-everywhere-opensource-src-$QT_VERSION
+ #
+ # We don't build Qt in its Full Shining Glory, as we don't need all
+ # of its components, and it takes *forever* to build in that form.
#
- # The libpixman that comes with the X11 for Leopard is too old
- # to support Cairo's image surface backend feature (which requires
- # pixman-1 >= 0.22.0).
+ # Qt 5.2.0 beta1 fails to build on OS X without -no-xcb due to bug
+ # QTBUG-34382.
#
-# if [ ! -f pixman-$PIXMAN_VERSION-done ] ; then
-# echo "Downloading, building, and installing pixman:"
-# [ -f pixman-$PIXMAN_VERSION.tar.gz ] || curl -O http://www.cairographics.org/releases/pixman-$PIXMAN_VERSION.tar.gz
-# gzcat pixman-$PIXMAN_VERSION.tar.gz | tar xf - || exit 1
-# cd pixman-$PIXMAN_VERSION
-# CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
-# make $MAKE_BUILD_OPTS || exit 1
-# $DO_MAKE_INSTALL || exit 1
-# cd ..
-# touch pixman-$PIXMAN_VERSION-done
-# fi
+ # Qt 5.x fails to build on OS X with -no-opengl due to bug
+ # QTBUG-31151.
+ #
+ ./configure -v -sdk macosx$min_osx_target -platform $TARGET_PLATFORM \
+ -opensource -confirm-license -no-c++11 -no-dbus \
+ -no-sql-sqlite -no-xcb -nomake examples \
+ -skip qtdoc -skip qtquickcontrols -skip qtwebkit \
+ -skip qtwebkit-examples -skip qtxmlpatterns
+ make || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch qt-$QT_VERSION-done
+fi
+if [ "$GTK_VERSION" ]; then
#
- # And now Cairo itself.
+ # GTK+ 3 requires a newer Cairo build than the one that comes with
+ # 10.6, so we build Cairo if we are using GTK+ 3.
#
- if [ ! -f cairo-$CAIRO_VERSION-done ] ; then
- echo "Downloading, building, and installing Cairo:"
- CAIRO_MAJOR_VERSION="`expr $CAIRO_VERSION : '\([0-9][0-9]*\).*'`"
- CAIRO_MINOR_VERSION="`expr $CAIRO_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
- CAIRO_DOTDOT_VERSION="`expr $CAIRO_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
- if [[ $CAIRO_MAJOR_VERSION -gt 1 ||
- $CAIRO_MINOR_VERSION -gt 12 ||
- ($CAIRO_MINOR_VERSION -eq 12 && $CAIRO_DOTDOT_VERSION -ge 2) ]]
- then
+ # In 10.6 and 10.7, it's an X11 library; if we build with "native" GTK+
+ # rather than X11 GTK+, we might have to build and install Cairo.
+ # In 10.8 and later, there is no X11, but it's included in Xquartz;
+ # again, if we build with "native" GTK+, we'd have to build and install
+ # it.
+ #
+ if [[ "$GTK_MAJOR_VERSION" -eq 3 || "$cairo_not_in_the_os" = yes ]]; then
+ #
+ # Requirements for Cairo first
+ #
+ # The libpng that comes with the X11 for Leopard has a bogus
+ # pkg-config file that lies about where the header files are,
+ # which causes other packages not to be able to find its
+ # headers.
+ #
+ # The libpng in later versions is not what the version of
+ # libpixman we build below wants - it wants libpng15.
+ #
+ if [ ! -f libpng-$PNG_VERSION-done ] ; then
+ echo "Downloading, building, and installing libpng:"
#
- # Starting with Cairo 1.12.2, the tarballs are compressed with
- # xz rather than gzip.
+ # The FTP site puts libpng x.y.* into a libpngxy directory.
#
- [ -f cairo-$CAIRO_VERSION.tar.xz ] || curl -O http://cairographics.org/releases/cairo-$CAIRO_VERSION.tar.xz || exit 1
- xzcat cairo-$CAIRO_VERSION.tar.xz | tar xf - || exit 1
- else
- [ -f cairo-$CAIRO_VERSION.tar.gz ] || curl -O http://cairographics.org/releases/cairo-$CAIRO_VERSION.tar.gz || exit 1
- gzcat cairo-$CAIRO_VERSION.tar.gz | tar xf - || exit 1
+ subdir=`echo $PNG_VERSION | sed 's/\([1-9][0-9]*\)\.\([1-9][0-9]*\).*/libpng\1\2'/`
+ [ -f libpng-$PNG_VERSION.tar.xz ] || curl -O ftp://ftp.simplesystems.org/pub/libpng/png/src/$subdir/libpng-$PNG_VERSION.tar.xz
+ xzcat libpng-$PNG_VERSION.tar.xz | tar xf - || exit 1
+ cd libpng-$PNG_VERSION
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch libpng-$PNG_VERSION-done
fi
- cd cairo-$CAIRO_VERSION
- # CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-quartz=no || exit 1
- # Maybe follow http://cairographics.org/end_to_end_build_for_mac_os_x/
- CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-quartz=yes || exit 1
+
#
- # We must avoid the version of libpng that comes with X11; the
- # only way I've found to force that is to forcibly set INCLUDES
- # when we do the build, so that this comes before CAIRO_CFLAGS,
- # which has -I/usr/X11/include added to it before anything
- # connected to libpng is.
+ # The libpixman versions that come with the X11s for Leopard,
+ # Snow Leopard, and Lion is too old to support Cairo's image
+ # surface backend feature (which requires pixman-1 >= 0.22.0).
#
- INCLUDES="-I/usr/local/include/libpng15" make $MAKE_BUILD_OPTS || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
- touch cairo-$CAIRO_VERSION-done
- fi
-fi
+ # XXX - what about the one that comes with the latest version
+ # of Xquartz?
+ #
+ if [ ! -f pixman-$PIXMAN_VERSION-done ] ; then
+ echo "Downloading, building, and installing pixman:"
+ [ -f pixman-$PIXMAN_VERSION.tar.gz ] || curl -O http://www.cairographics.org/releases/pixman-$PIXMAN_VERSION.tar.gz
+ gzcat pixman-$PIXMAN_VERSION.tar.gz | tar xf - || exit 1
+ cd pixman-$PIXMAN_VERSION
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
+ make V=1 $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch pixman-$PIXMAN_VERSION-done
+ fi
-if [ ! -f atk-$ATK_VERSION-done ] ; then
- echo "Downloading, building, and installing ATK:"
- atk_dir=`expr $ATK_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
- ATK_MAJOR_VERSION="`expr $ATK_VERSION : '\([0-9][0-9]*\).*'`"
- ATK_MINOR_VERSION="`expr $ATK_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
- ATK_DOTDOT_VERSION="`expr $ATK_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
- if [[ $ATK_MAJOR_VERSION -gt 2 ||
- ($ATK_MAJOR_VERSION -eq 2 && $ATK_MINOR_VERSION -gt 0) ||
- ($ATK_MANOR_VERSION -eq 2 && $ATK_MINOR_VERSION -eq 0 && $ATK_DOTDOT_VERSION -ge 1) ]]
- then
#
- # Starting with ATK 2.0.1, xz-compressed tarballs are available.
+ # And now Cairo itself.
+ # XXX - with the libxcb that comes with 10.6,
#
- [ -f atk-$ATK_VERSION.tar.xz ] || curl -O http://ftp.gnome.org/pub/gnome/sources/atk/$atk_dir/atk-$ATK_VERSION.tar.xz || exit 1
- xzcat atk-$ATK_VERSION.tar.xz | tar xf - || exit 1
- else
- [ -f atk-$ATK_VERSION.tar.bz2 ] || curl -O http://ftp.gnome.org/pub/gnome/sources/atk/$atk_dir/atk-$ATK_VERSION.tar.bz2 || exit 1
- bzcat atk-$ATK_VERSION.tar.bz2 | tar xf - || exit 1
+ # xcb_discard_reply() is missing, and the build fails.
+ #
+ if [ ! -f cairo-$CAIRO_VERSION-done ] ; then
+ echo "Downloading, building, and installing Cairo:"
+ CAIRO_MAJOR_VERSION="`expr $CAIRO_VERSION : '\([0-9][0-9]*\).*'`"
+ CAIRO_MINOR_VERSION="`expr $CAIRO_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ CAIRO_DOTDOT_VERSION="`expr $CAIRO_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ if [[ $CAIRO_MAJOR_VERSION -gt 1 ||
+ $CAIRO_MINOR_VERSION -gt 12 ||
+ ($CAIRO_MINOR_VERSION -eq 12 && $CAIRO_DOTDOT_VERSION -ge 2) ]]
+ then
+ #
+ # Starting with Cairo 1.12.2, the tarballs are compressed with
+ # xz rather than gzip.
+ #
+ [ -f cairo-$CAIRO_VERSION.tar.xz ] || curl -O http://cairographics.org/releases/cairo-$CAIRO_VERSION.tar.xz || exit 1
+ xzcat cairo-$CAIRO_VERSION.tar.xz | tar xf - || exit 1
+ else
+ [ -f cairo-$CAIRO_VERSION.tar.gz ] || curl -O http://cairographics.org/releases/cairo-$CAIRO_VERSION.tar.gz || exit 1
+ gzcat cairo-$CAIRO_VERSION.tar.gz | tar xf - || exit 1
+ fi
+ cd cairo-$CAIRO_VERSION
+ # CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-quartz=no || exit 1
+ # Maybe follow http://cairographics.org/end_to_end_build_for_mac_os_x/
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-quartz=yes || exit 1
+ #
+ # We must avoid the version of libpng that comes with X11; the
+ # only way I've found to force that is to forcibly set INCLUDES
+ # when we do the build, so that this comes before CAIRO_CFLAGS,
+ # which has -I/usr/X11/include added to it before anything
+ # connected to libpng is.
+ #
+ INCLUDES="-I/usr/local/include/libpng15" make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch cairo-$CAIRO_VERSION-done
+ fi
fi
- cd atk-$ATK_VERSION
- CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
- make $MAKE_BUILD_OPTS || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
- touch atk-$ATK_VERSION-done
-fi
-if [ ! -f pango-$PANGO_VERSION-done ] ; then
- echo "Downloading, building, and installing Pango:"
- pango_dir=`expr $PANGO_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
- PANGO_MAJOR_VERSION="`expr $PANGO_VERSION : '\([0-9][0-9]*\).*'`"
- PANGO_MINOR_VERSION="`expr $PANGO_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
- if [[ $PANGO_MAJOR_VERSION -gt 1 ||
- $PANGO_MINOR_VERSION -ge 29 ]]
- then
- #
- # Starting with Pango 1.29, the tarballs are compressed with
- # xz rather than bzip2.
- #
- [ -f pango-$PANGO_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/pango/$pango_dir/pango-$PANGO_VERSION.tar.xz || exit 1
- xzcat pango-$PANGO_VERSION.tar.xz | tar xf - || exit 1
- else
- [ -f pango-$PANGO_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/pango/$pango_dir/pango-$PANGO_VERSION.tar.bz2 || exit 1
- bzcat pango-$PANGO_VERSION.tar.bz2 | tar xf - || exit 1
+ if [ ! -f atk-$ATK_VERSION-done ] ; then
+ echo "Downloading, building, and installing ATK:"
+ atk_dir=`expr $ATK_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
+ ATK_MAJOR_VERSION="`expr $ATK_VERSION : '\([0-9][0-9]*\).*'`"
+ ATK_MINOR_VERSION="`expr $ATK_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ ATK_DOTDOT_VERSION="`expr $ATK_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ if [[ $ATK_MAJOR_VERSION -gt 2 ||
+ ($ATK_MAJOR_VERSION -eq 2 && $ATK_MINOR_VERSION -gt 0) ||
+ ($ATK_MANOR_VERSION -eq 2 && $ATK_MINOR_VERSION -eq 0 && $ATK_DOTDOT_VERSION -ge 1) ]]
+ then
+ #
+ # Starting with ATK 2.0.1, xz-compressed tarballs are available.
+ #
+ [ -f atk-$ATK_VERSION.tar.xz ] || curl -O http://ftp.gnome.org/pub/gnome/sources/atk/$atk_dir/atk-$ATK_VERSION.tar.xz || exit 1
+ xzcat atk-$ATK_VERSION.tar.xz | tar xf - || exit 1
+ else
+ [ -f atk-$ATK_VERSION.tar.bz2 ] || curl -O http://ftp.gnome.org/pub/gnome/sources/atk/$atk_dir/atk-$ATK_VERSION.tar.bz2 || exit 1
+ bzcat atk-$ATK_VERSION.tar.bz2 | tar xf - || exit 1
+ fi
+ cd atk-$ATK_VERSION
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch atk-$ATK_VERSION-done
fi
- cd pango-$PANGO_VERSION
- CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
- make $MAKE_BUILD_OPTS || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
- touch pango-$PANGO_VERSION-done
-fi
-if [ "$GDK_PIXBUF_VERSION" -a ! -f gdk-pixbuf-$GDK_PIXBUF_VERSION-done ] ; then
- echo "Downloading, building, and installing gdk-pixbuf:"
- gdk_pixbuf_dir=`expr $GDK_PIXBUF_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
- [ -f gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/gdk-pixbuf/$gdk_pixbuf_dir/gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz || exit 1
- xzcat gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz | tar xf - || exit 1
- cd gdk-pixbuf-$GDK_PIXBUF_VERSION
- #
- # If we're building for 10.6, use libpng12; if you have 10.7.5, including
- # X11, and Xcode 4.3.3, the system has libpng15, complete with pkg-config
- # files, as part of X11, but 10.6's X11 has only libpng12, and the 10.6
- # SDK in Xcode 4.3.3 also has only libpng12, and has no pkg-config files
- # of its own, so we have to explicitly set LIBPNG to override the
- # configure script, and also force the CFLAGS to look for the header
- # files for libpng12 (note that -isysroot doesn't affect the arguments
- # to -I, so we need to include the SDK path explicitly).
- #
- if [[ "$min_osx_target" = 10.6 ]]
- then
- LIBPNG="-L/usr/X11/lib -lpng12" CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -I$SDKPATH/usr/X11/include/libpng12" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libtiff --without-libjpeg || exit 1
- else
- CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libtiff --without-libjpeg || exit 1
+ if [ ! -f pango-$PANGO_VERSION-done ] ; then
+ echo "Downloading, building, and installing Pango:"
+ pango_dir=`expr $PANGO_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
+ PANGO_MAJOR_VERSION="`expr $PANGO_VERSION : '\([0-9][0-9]*\).*'`"
+ PANGO_MINOR_VERSION="`expr $PANGO_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ if [[ $PANGO_MAJOR_VERSION -gt 1 ||
+ $PANGO_MINOR_VERSION -ge 29 ]]
+ then
+ #
+ # Starting with Pango 1.29, the tarballs are compressed with
+ # xz rather than bzip2.
+ #
+ [ -f pango-$PANGO_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/pango/$pango_dir/pango-$PANGO_VERSION.tar.xz || exit 1
+ xzcat pango-$PANGO_VERSION.tar.xz | tar xf - || exit 1
+ else
+ [ -f pango-$PANGO_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/pango/$pango_dir/pango-$PANGO_VERSION.tar.bz2 || exit 1
+ bzcat pango-$PANGO_VERSION.tar.bz2 | tar xf - || exit 1
+ fi
+ cd pango-$PANGO_VERSION
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch pango-$PANGO_VERSION-done
fi
- make $MAKE_BUILD_OPTS || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
- touch gdk-pixbuf-$GDK_PIXBUF_VERSION-done
-fi
-if [ ! -f gtk+-$GTK_VERSION-done ] ; then
- echo "Downloading, building, and installing GTK+:"
- gtk_dir=`expr $GTK_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
- GTK_MAJOR_VERSION="`expr $GTK_VERSION : '\([0-9][0-9]*\).*'`"
- GTK_MINOR_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
- GTK_DOTDOT_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
- if [[ $GTK_MAJOR_VERSION -gt 2 ||
- $GTK_MINOR_VERSION -gt 24 ||
- ($GTK_MINOR_VERSION -eq 24 && $GTK_DOTDOT_VERSION -ge 5) ]]
- then
+ if [ "$GDK_PIXBUF_VERSION" -a ! -f gdk-pixbuf-$GDK_PIXBUF_VERSION-done ] ; then
+ echo "Downloading, building, and installing gdk-pixbuf:"
+ gdk_pixbuf_dir=`expr $GDK_PIXBUF_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
+ [ -f gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/gdk-pixbuf/$gdk_pixbuf_dir/gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz || exit 1
+ xzcat gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz | tar xf - || exit 1
+ cd gdk-pixbuf-$GDK_PIXBUF_VERSION
#
- # Starting with GTK+ 2.24.5, the tarballs are compressed with
- # xz rather than gzip, in addition to bzip2; use xz, as we've
- # built and installed it, and as xz compresses better than
- # bzip2 so the tarballs take less time to download.
+ # If we're building for 10.6, use libpng12; if you have 10.7.5, including
+ # X11, and Xcode 4.3.3, the system has libpng15, complete with pkg-config
+ # files, as part of X11, but 10.6's X11 has only libpng12, and the 10.6
+ # SDK in Xcode 4.3.3 also has only libpng12, and has no pkg-config files
+ # of its own, so we have to explicitly set LIBPNG to override the
+ # configure script, and also force the CFLAGS to look for the header
+ # files for libpng12 (note that -isysroot doesn't affect the arguments
+ # to -I, so we need to include the SDK path explicitly).
#
- [ -f gtk+-$GTK_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/gtk+/$gtk_dir/gtk+-$GTK_VERSION.tar.xz || exit 1
- xzcat gtk+-$GTK_VERSION.tar.xz | tar xf - || exit 1
- else
- [ -f gtk+-$GTK_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/gtk+/$gtk_dir/gtk+-$GTK_VERSION.tar.bz2 || exit 1
- bzcat gtk+-$GTK_VERSION.tar.bz2 | tar xf - || exit 1
+ if [[ "$min_osx_target" = 10.6 ]]
+ then
+ LIBPNG="-L/usr/X11/lib -lpng12" CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS -I$SDKPATH/usr/X11/include/libpng12" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libtiff --without-libjpeg || exit 1
+ else
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libtiff --without-libjpeg || exit 1
+ fi
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch gdk-pixbuf-$GDK_PIXBUF_VERSION-done
fi
- cd gtk+-$GTK_VERSION
- if [ $DARWIN_MAJOR_VERSION -ge "12" ]
- then
- #
- # GTK+ 2.24.10, at least, doesn't build on Mountain Lion with the
- # CUPS printing backend - either the CUPS API changed incompatibly
- # or the backend was depending on non-API implementation details.
- #
- # Configure it out, on Mountain Lion and later, for now.
- # (12 is the Darwin major version number in Mountain Lion.)
- #
- # Also, configure out libtiff and libjpeg; configure scripts
- # just ignore unknown --enable/--disable and --with/--without
- # options (at least they've always do so up to now).
- #
- CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-cups --without-libtiff --without-libjpeg || exit 1
- else
- CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libtiff --without-libjpeg || exit 1
+
+ if [ ! -f gtk+-$GTK_VERSION-done ] ; then
+ echo "Downloading, building, and installing GTK+:"
+ gtk_dir=`expr $GTK_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
+ if [[ $GTK_MAJOR_VERSION -gt 2 ||
+ $GTK_MINOR_VERSION -gt 24 ||
+ ($GTK_MINOR_VERSION -eq 24 && $GTK_DOTDOT_VERSION -ge 5) ]]
+ then
+ #
+ # Starting with GTK+ 2.24.5, the tarballs are compressed with
+ # xz rather than gzip, in addition to bzip2; use xz, as we've
+ # built and installed it, and as xz compresses better than
+ # bzip2 so the tarballs take less time to download.
+ #
+ [ -f gtk+-$GTK_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/gtk+/$gtk_dir/gtk+-$GTK_VERSION.tar.xz || exit 1
+ xzcat gtk+-$GTK_VERSION.tar.xz | tar xf - || exit 1
+ else
+ [ -f gtk+-$GTK_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/gtk+/$gtk_dir/gtk+-$GTK_VERSION.tar.bz2 || exit 1
+ bzcat gtk+-$GTK_VERSION.tar.bz2 | tar xf - || exit 1
+ fi
+ cd gtk+-$GTK_VERSION
+ if [ $DARWIN_MAJOR_VERSION -ge "12" ]
+ then
+ #
+ # GTK+ 2.24.10, at least, doesn't build on Mountain Lion with the
+ # CUPS printing backend - either the CUPS API changed incompatibly
+ # or the backend was depending on non-API implementation details.
+ #
+ # Configure it out, on Mountain Lion and later, for now.
+ # (12 is the Darwin major version number in Mountain Lion.)
+ #
+ # Also, configure out libtiff and libjpeg; configure scripts
+ # just ignore unknown --enable/--disable and --with/--without
+ # options (at least they've always do so up to now).
+ #
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-cups --without-libtiff --without-libjpeg || exit 1
+ else
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libtiff --without-libjpeg || exit 1
+ fi
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch gtk+-$GTK_VERSION-done
fi
- make $MAKE_BUILD_OPTS || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
- touch gtk+-$GTK_VERSION-done
fi
#
touch geoip-$GEOIP_VERSION-done
fi
+if [ "$CARES_VERSION" -a ! -f geoip-$CARES_VERSION-done ]
+then
+ echo "Downloading, building, and installing C-Ares API:"
+ [ -f c-ares-$CARES_VERSION.tar.gz ] || curl -L -O http://c-ares.haxx.se/download/c-ares-$CARES_VERSION.tar.gz || exit 1
+ gzcat c-ares-$CARES_VERSION.tar.gz | tar xf - || exit 1
+ cd c-ares-$CARES_VERSION
+ CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch geoip-$CARES_VERSION-done
+fi
+
echo ""
echo "You are now prepared to build Wireshark. To do so do:"
git.samba.org / metze / wireshark / wip.git / blobdiff