close IN;
# If we were not built with ADS support, pretend we were never even available
+ print "smbd does not have ADS support\n" unless $found_ads;
return $found_ads;
}
+# return smb.conf parameters applicable to @path, based on the underlying
+# filesystem type
+sub get_fs_specific_conf($$)
+{
+ my ($self, $path) = @_;
+ my $mods = "";
+ my $stat_out = `stat --file-system $path` or return "";
+
+ if ($stat_out =~ m/Type:\s+btrfs/) {
+ $mods .= "btrfs ";
+ }
+
+ if ($mods) {
+ return "vfs objects = $mods";
+ }
+
+ return undef;
+}
+
sub new($$) {
- my ($classname, $bindir, $binary_mapping, $srcdir, $server_maxtime) = @_;
+ my ($classname, $bindir, $srcdir, $server_maxtime) = @_;
my $self = { vars => {},
bindir => $bindir,
- binary_mapping => $binary_mapping,
srcdir => $srcdir,
server_maxtime => $server_maxtime
};
{
my ($self, $envvars) = @_;
my $count = 0;
-
+
# This should cause smbd to terminate gracefully
close($envvars->{STDIN_PIPE});
sub setup_env($$$)
{
my ($self, $envname, $path) = @_;
-
+
+ $ENV{ENVNAME} = $envname;
+
if (defined($self->{vars}->{$envname})) {
return $self->{vars}->{$envname};
}
- if ($envname eq "s3dc") {
- return $self->setup_s3dc("$path/s3dc");
- } elsif ($envname eq "secshare") {
- return $self->setup_secshare("$path/secshare");
+ #
+ # Avoid hitting system krb5.conf -
+ # An env that needs Kerberos will reset this to the real
+ # value.
+ #
+ $ENV{KRB5_CONFIG} = "$path/no_krb5.conf";
+
+ if ($envname eq "nt4_dc") {
+ return $self->setup_nt4_dc("$path/nt4_dc");
+ } elsif ($envname eq "nt4_dc_schannel") {
+ return $self->setup_nt4_dc_schannel("$path/nt4_dc_schannel");
+ } elsif ($envname eq "simpleserver") {
+ return $self->setup_simpleserver("$path/simpleserver");
+ } elsif ($envname eq "fileserver") {
+ return $self->setup_fileserver("$path/fileserver");
} elsif ($envname eq "maptoguest") {
return $self->setup_maptoguest("$path/maptoguest");
} elsif ($envname eq "ktest") {
return $self->setup_ktest("$path/ktest");
- } elsif ($envname eq "member") {
- if (not defined($self->{vars}->{s3dc})) {
- if (not defined($self->setup_s3dc("$path/s3dc"))) {
+ } elsif ($envname eq "nt4_member") {
+ if (not defined($self->{vars}->{nt4_dc})) {
+ if (not defined($self->setup_nt4_dc("$path/nt4_dc"))) {
return undef;
}
}
- return $self->setup_member("$path/member", $self->{vars}->{s3dc});
+ return $self->setup_nt4_member("$path/nt4_member", $self->{vars}->{nt4_dc});
} else {
return "UNKNOWN";
}
}
-sub setup_s3dc($$)
+sub setup_nt4_dc($$)
{
my ($self, $path) = @_;
- print "PROVISIONING S3DC...";
+ print "PROVISIONING NT4 DC...";
- my $s3dc_options = "
+ my $nt4_dc_options = "
domain master = yes
domain logons = yes
lanman auth = yes
rpc_server:samr = external
rpc_server:netlogon = external
rpc_server:register_embedded_np = yes
+ rpc_server:FssagentRpc = external
rpc_daemon:epmd = fork
rpc_daemon:spoolssd = fork
rpc_daemon:lsasd = fork
+ rpc_daemon:fssd = fork
+ fss: sequence timeout = 1
";
my $vars = $self->provision($path,
- "LOCALS3DC2",
- "locals3dc2pass",
- $s3dc_options);
+ "LOCALNT4DC2",
+ "localntdc2pass",
+ $nt4_dc_options);
$vars or return undef;
- $self->check_or_start($vars,
- "yes", "yes", "yes");
+ if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
+ return undef;
+ }
+
+ $vars->{DC_SERVER} = $vars->{SERVER};
+ $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
+ $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
+ $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
+ $vars->{DC_USERNAME} = $vars->{USERNAME};
+ $vars->{DC_PASSWORD} = $vars->{PASSWORD};
+
+ $self->{vars}->{nt4_dc} = $vars;
+
+ return $vars;
+}
+
+sub setup_nt4_dc_schannel($$)
+{
+ my ($self, $path) = @_;
+
+ print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
+
+ my $pdc_options = "
+ domain master = yes
+ domain logons = yes
+ lanman auth = yes
+
+ rpc_server:epmapper = external
+ rpc_server:spoolss = external
+ rpc_server:lsarpc = external
+ rpc_server:samr = external
+ rpc_server:netlogon = external
+ rpc_server:register_embedded_np = yes
+
+ rpc_daemon:epmd = fork
+ rpc_daemon:spoolssd = fork
+ rpc_daemon:lsasd = fork
+
+ server schannel = yes
+";
+
+ my $vars = $self->provision($path,
+ "LOCALNT4DC9",
+ "localntdc9pass",
+ $pdc_options);
+
+ $vars or return undef;
- if (not $self->wait_for_start($vars)) {
+ if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
return undef;
}
$vars->{DC_SERVER} = $vars->{SERVER};
$vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
+ $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
$vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
$vars->{DC_USERNAME} = $vars->{USERNAME};
$vars->{DC_PASSWORD} = $vars->{PASSWORD};
- $self->{vars}->{s3dc} = $vars;
+ $self->{vars}->{nt4_dc_schannel} = $vars;
return $vars;
}
-sub setup_member($$$)
+sub setup_nt4_member($$$)
{
- my ($self, $prefix, $s3dcvars) = @_;
+ my ($self, $prefix, $nt4_dc_vars) = @_;
+ my $count = 0;
+ my $rc;
print "PROVISIONING MEMBER...";
my $member_options = "
security = domain
server signing = on
+ dbwrap_tdb_mutexes:* = yes
";
my $ret = $self->provision($prefix,
- "LOCALMEMBER3",
- "localmember3pass",
+ "LOCALNT4MEMBER3",
+ "localnt4member3pass",
$member_options);
$ret or return undef;
+ my $nmblookup = Samba::bindir_path($self, "nmblookup");
+ do {
+ print "Waiting for the LOGON SERVER registration ...\n";
+ $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
+ if ($rc != 0) {
+ sleep(1);
+ }
+ $count++;
+ } while ($rc != 0 && $count < 10);
+ if ($count == 10) {
+ print "NMBD not reachable after 10 retries\n";
+ teardown_env($self, $ret);
+ return 0;
+ }
+
my $net = Samba::bindir_path($self, "net");
my $cmd = "";
$cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
- $cmd .= "$net join $ret->{CONFIGURATION} $s3dcvars->{DOMAIN} member";
- $cmd .= " -U$s3dcvars->{USERNAME}\%$s3dcvars->{PASSWORD}";
+ $cmd .= "$net join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
+ $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
if (system($cmd) != 0) {
warn("Join failed\n$cmd");
return undef;
}
- $self->check_or_start($ret, "yes", "yes", "yes");
-
- if (not $self->wait_for_start($ret)) {
+ if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
return undef;
}
- $ret->{DC_SERVER} = $s3dcvars->{SERVER};
- $ret->{DC_SERVER_IP} = $s3dcvars->{SERVER_IP};
- $ret->{DC_NETBIOSNAME} = $s3dcvars->{NETBIOSNAME};
- $ret->{DC_USERNAME} = $s3dcvars->{USERNAME};
- $ret->{DC_PASSWORD} = $s3dcvars->{PASSWORD};
+ $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
+ $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
+ $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
+ $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
+ $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
+ $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
return $ret;
}
my $ret = $self->provision($prefix,
"LOCALADMEMBER",
"loCalMemberPass",
- $member_options);
+ $member_options,
+ $dcvars->{SERVER_IP},
+ $dcvars->{SERVER_IPV6});
$ret or return undef;
$ctx->{realm} = $dcvars->{REALM};
$ctx->{dnsname} = lc($dcvars->{REALM});
$ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
+ $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
Samba::mk_krb5_conf($ctx, "");
$ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
my $net = Samba::bindir_path($self, "net");
my $cmd = "";
$cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
+ if (defined($ret->{RESOLV_WRAPPER_CONF})) {
+ $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
+ } else {
+ $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
+ }
$cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
$cmd .= "$net join $ret->{CONFIGURATION}";
$cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
# access the share for tests.
chmod 0777, "$prefix/share";
- $self->check_or_start($ret,
- "yes", "yes", "yes");
+ if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
+ return undef;
+ }
+
+ $ret->{DC_SERVER} = $dcvars->{SERVER};
+ $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
+ $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
+ $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
+ $ret->{DC_USERNAME} = $dcvars->{USERNAME};
+ $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
- $self->wait_for_start($ret);
+ # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
+ $ret->{target} = $self;
+
+ return $ret;
+}
+
+sub setup_admember_rfc2307($$$$)
+{
+ my ($self, $prefix, $dcvars) = @_;
+
+ # If we didn't build with ADS, pretend this env was never available
+ if (not $self->have_ads()) {
+ return "UNKNOWN";
+ }
+
+ print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
+
+ my $member_options = "
+ security = ads
+ server signing = on
+ workgroup = $dcvars->{DOMAIN}
+ realm = $dcvars->{REALM}
+ idmap config $dcvars->{DOMAIN} : backend = rfc2307
+ idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
+ idmap config $dcvars->{DOMAIN} : ldap_server = ad
+ idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
+ idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
+";
+
+ my $ret = $self->provision($prefix,
+ "RFC2307MEMBER",
+ "loCalMemberPass",
+ $member_options,
+ $dcvars->{SERVER_IP},
+ $dcvars->{SERVER_IPV6});
+
+ $ret or return undef;
+
+ close(USERMAP);
+ $ret->{DOMAIN} = $dcvars->{DOMAIN};
+ $ret->{REALM} = $dcvars->{REALM};
+
+ my $ctx;
+ my $prefix_abs = abs_path($prefix);
+ $ctx = {};
+ $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
+ $ctx->{domain} = $dcvars->{DOMAIN};
+ $ctx->{realm} = $dcvars->{REALM};
+ $ctx->{dnsname} = lc($dcvars->{REALM});
+ $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
+ $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
+ Samba::mk_krb5_conf($ctx, "");
+
+ $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
+
+ my $net = Samba::bindir_path($self, "net");
+ my $cmd = "";
+ $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
+ if (defined($ret->{RESOLV_WRAPPER_CONF})) {
+ $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
+ } else {
+ $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
+ }
+ $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
+ $cmd .= "$net join $ret->{CONFIGURATION}";
+ $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
+
+ if (system($cmd) != 0) {
+ warn("Join failed\n$cmd");
+ return undef;
+ }
+
+ # We need world access to this share, as otherwise the domain
+ # administrator from the AD domain provided by Samba4 can't
+ # access the share for tests.
+ chmod 0777, "$prefix/share";
+
+ if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
+ return undef;
+ }
$ret->{DC_SERVER} = $dcvars->{SERVER};
$ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
+ $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
$ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
$ret->{DC_USERNAME} = $dcvars->{USERNAME};
$ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
return $ret;
}
-sub setup_secshare($$)
+sub setup_simpleserver($$)
{
my ($self, $path) = @_;
- my $vfs_modulesdir_abs = $ENV{VFSLIBDIR};
- print "PROVISIONING server with security=share...";
+ print "PROVISIONING simple server...";
my $prefix_abs = abs_path($path);
- my $secshare_options = "
- security = share
+ my $simpleserver_options = "
lanman auth = yes
- vfs objects = $vfs_modulesdir_abs/xattr_tdb.so $vfs_modulesdir_abs/streams_depot.so
+ vfs objects = xattr_tdb streams_depot
+ change notify = no
[vfs_aio_fork]
path = $prefix_abs/share
- vfs objects = $vfs_modulesdir_abs/aio_fork.so
+ vfs objects = aio_fork
read only = no
vfs_aio_fork:erratic_testing_mode=yes
";
my $vars = $self->provision($path,
"LOCALSHARE4",
"local4pass",
- $secshare_options);
+ $simpleserver_options);
$vars or return undef;
- $self->check_or_start($vars, "yes", "no", "yes");
+ if (not $self->check_or_start($vars, "yes", "no", "yes")) {
+ return undef;
+ }
+
+ $self->{vars}->{simpleserver} = $vars;
+
+ return $vars;
+}
+
+sub setup_fileserver($$)
+{
+ my ($self, $path) = @_;
+ my $prefix_abs = abs_path($path);
+ my $srcdir_abs = abs_path($self->{srcdir});
+
+ print "PROVISIONING file server ...\n";
+
+ my @dirs = ();
+
+ mkdir($prefix_abs, 0777);
+
+ my $share_dir="$prefix_abs/share";
+
+ # Create share directory structure
+ my $lower_case_share_dir="$share_dir/lower-case";
+ push(@dirs, $lower_case_share_dir);
+
+ my $lower_case_share_dir_30000="$share_dir/lower-case-30000";
+ push(@dirs, $lower_case_share_dir_30000);
+
+ my $dfree_share_dir="$share_dir/dfree";
+ push(@dirs, $dfree_share_dir);
+ push(@dirs, "$dfree_share_dir/subdir1");
+ push(@dirs, "$dfree_share_dir/subdir2");
+
+ my $valid_users_sharedir="$share_dir/valid_users";
+ push(@dirs,$valid_users_sharedir);
+
+ my $offline_sharedir="$share_dir/offline";
+ push(@dirs,$offline_sharedir);
+
+ my $fileserver_options = "
+[lowercase]
+ path = $lower_case_share_dir
+ comment = smb username is [%U]
+ case sensitive = True
+ default case = lower
+ preserve case = no
+ short preserve case = no
+[lowercase-30000]
+ path = $lower_case_share_dir_30000
+ comment = smb username is [%U]
+ case sensitive = True
+ default case = lower
+ preserve case = no
+ short preserve case = no
+[dfree]
+ path = $dfree_share_dir
+ comment = smb username is [%U]
+ dfree command = $srcdir_abs/testprogs/blackbox/dfree.sh
+[valid-users-access]
+ path = $valid_users_sharedir
+ valid users = +userdup
+[offline]
+ path = $offline_sharedir
+ vfs objects = offline
+ ";
+
+ my $vars = $self->provision($path,
+ "FILESERVER",
+ "fileserver",
+ $fileserver_options,
+ undef,
+ undef,
+ 1);
+
+ $vars or return undef;
- if (not $self->wait_for_start($vars)) {
+ if (not $self->check_or_start($vars, "yes", "no", "yes")) {
return undef;
}
- $self->{vars}->{secshare} = $vars;
+ $self->{vars}->{fileserver} = $vars;
+
+ mkdir($_, 0777) foreach(@dirs);
+
+ ## Create case sensitive lower case share dir
+ foreach my $file ('a'..'z') {
+ my $full_path = $lower_case_share_dir . '/' . $file;
+ open my $fh, '>', $full_path;
+ # Add some content to file
+ print $fh $full_path;
+ close $fh;
+ }
+
+ for (my $file = 1; $file < 51; ++$file) {
+ my $full_path = $lower_case_share_dir . '/' . $file;
+ open my $fh, '>', $full_path;
+ # Add some content to file
+ print $fh $full_path;
+ close $fh;
+ }
+
+ # Create content for 30000 share
+ foreach my $file ('a'..'z') {
+ my $full_path = $lower_case_share_dir_30000 . '/' . $file;
+ open my $fh, '>', $full_path;
+ # Add some content to file
+ print $fh $full_path;
+ close $fh;
+ }
+
+ for (my $file = 1; $file < 30001; ++$file) {
+ my $full_path = $lower_case_share_dir_30000 . '/' . $file;
+ open my $fh, '>', $full_path;
+ # Add some content to file
+ print $fh $full_path;
+ close $fh;
+ }
+
+ ##
+ ## create a listable file in valid_users_share
+ ##
+ my $valid_users_target = "$valid_users_sharedir/foo";
+ unless (open(VALID_USERS_TARGET, ">$valid_users_target")) {
+ warn("Unable to open $valid_users_target");
+ return undef;
+ }
+ close(VALID_USERS_TARGET);
+ chmod 0644, $valid_users_target;
return $vars;
}
$ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
$ctx->{dnsname} = lc($ctx->{realm});
$ctx->{kdc_ipv4} = "0.0.0.0";
+ $ctx->{kdc_ipv6} = "::";
Samba::mk_krb5_conf($ctx, "");
$ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
chmod 0600, "$prefix/private/secrets.tdb";
+#Make sure there's no old ntdb file.
+ system("rm -f $prefix/private/secrets.ntdb");
+
#This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
# "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
#
# access the share for tests.
chmod 0777, "$prefix/share";
- $self->check_or_start($ret, "yes", "no", "yes");
-
- if (not $self->wait_for_start($ret)) {
+ if (not $self->check_or_start($ret, "yes", "no", "yes")) {
return undef;
}
return $ret;
$vars or return undef;
- $self->check_or_start($vars,
- "yes", "no", "yes");
-
- if (not $self->wait_for_start($vars)) {
+ if (not $self->check_or_start($vars, "yes", "no", "yes")) {
return undef;
}
SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
$ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
- $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
+ $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
$ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
$ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
$ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
- $ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
+ $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
+ $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
+ $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
+ $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
+ $ENV{UID_WRAPPER_ROOT} = "1";
- $ENV{UID_WRAPPER} = "1";
+ $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
if ($nmbd ne "yes") {
$SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
exit 0;
}
+ $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
my @optargs = ("-d0");
if (defined($ENV{NMBD_OPTIONS})) {
@optargs = split(/ /, $ENV{NMBD_OPTIONS});
}
-
- $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
-
my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
if(defined($ENV{NMBD_VALGRIND})) {
@preargs = split(/ /, $ENV{NMBD_VALGRIND});
}
+ my @args = ("-F", "--no-process-group",
+ "-s", $env_vars->{SERVERCONFFILE},
+ "-l", $env_vars->{LOGDIR});
+ if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
+ push(@args, "--log-stdout");
+ }
close($env_vars->{STDIN_PIPE});
open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
- exec(@preargs, Samba::bindir_path($self, "nmbd"), "-F", "--no-process-group", "--log-stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start nmbd: $!");
+ exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
+ or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
}
$env_vars->{NMBD_TL_PID} = $pid;
write_pid($env_vars, "nmbd", $pid);
SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
$ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
- $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
+ $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
$ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
$ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
$ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
- $ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
+ $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
+ $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
+ $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
+ $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
+ if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
+ $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
+ } else {
+ $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
+ }
+ $ENV{UID_WRAPPER_ROOT} = "1";
- $ENV{UID_WRAPPER} = "1";
+ $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
if ($winbindd ne "yes") {
$SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
exit 0;
}
+ $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
my @optargs = ("-d0");
if (defined($ENV{WINBINDD_OPTIONS})) {
@optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
}
-
- $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
-
my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
if(defined($ENV{WINBINDD_VALGRIND})) {
@preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
}
-
- print "Starting winbindd with config $env_vars->{SERVERCONFFILE}\n";
+ my @args = ("-F", "--no-process-group",
+ "-s", $env_vars->{SERVERCONFFILE},
+ "-l", $env_vars->{LOGDIR});
+ if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
+ push(@args, "--stdout");
+ }
close($env_vars->{STDIN_PIPE});
open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
- exec(@preargs, Samba::bindir_path($self, "winbindd"), "-F", "--no-process-group", "--stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start winbindd: $!");
+ exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
+ or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
}
$env_vars->{WINBINDD_TL_PID} = $pid;
write_pid($env_vars, "winbindd", $pid);
SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
$ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
- $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
+ $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
$ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
$ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
$ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
- $ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
+ $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
+ $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
+ $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
+ $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
+ if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
+ $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
+ } else {
+ $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
+ }
+ $ENV{UID_WRAPPER_ROOT} = "1";
- $ENV{UID_WRAPPER} = "1";
+ $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
if ($smbd ne "yes") {
$SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
if(defined($ENV{SMBD_VALGRIND})) {
@preargs = split(/ /,$ENV{SMBD_VALGRIND});
}
+ my @args = ("-F", "--no-process-group",
+ "-s", $env_vars->{SERVERCONFFILE},
+ "-l", $env_vars->{LOGDIR});
+ if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
+ push(@args, "--log-stdout");
+ }
close($env_vars->{STDIN_PIPE});
open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
- exec(@preargs, Samba::bindir_path($self, "smbd"), "-F", "--no-process-group", "--log-stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start smbd: $!");
+ exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
+ or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
}
$env_vars->{SMBD_TL_PID} = $pid;
write_pid($env_vars, "smbd", $pid);
close(STDIN_READER);
- return 0;
+ return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
}
-sub provision($$$$$$)
+sub provision($$$$$$$$)
{
- my ($self, $prefix, $server, $password, $extra_options, $no_delete_prefix) = @_;
+ my ($self, $prefix, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
##
## setup the various environment variables we need
my $swiface = Samba::get_interface($server);
my %ret = ();
my $server_ip = "127.0.0.$swiface";
+ my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
my $domain = "SAMBA-TEST";
my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
my $prefix_abs = abs_path($prefix);
my $bindir_abs = abs_path($self->{bindir});
- my $vfs_modulesdir_abs = ($ENV{VFSLIBDIR} or $bindir_abs);
-
- my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
my @dirs = ();
my $msdfs_deeppath="$msdfs_shrdir/deeppath";
push(@dirs,$msdfs_deeppath);
+ my $badnames_shrdir="$shrdir/badnames";
+ push(@dirs,$badnames_shrdir);
+
+ my $lease1_shrdir="$shrdir/SMB2_10";
+ push(@dirs,$lease1_shrdir);
+
+ my $lease2_shrdir="$shrdir/SMB3_00";
+ push(@dirs,$lease2_shrdir);
+
+ my $manglenames_shrdir="$shrdir/manglenames";
+ push(@dirs,$manglenames_shrdir);
+
+ my $widelinks_shrdir="$shrdir/widelinks";
+ push(@dirs,$widelinks_shrdir);
+
+ my $widelinks_linkdir="$shrdir/widelinks_foo";
+ push(@dirs,$widelinks_linkdir);
+
+ my $shadow_tstdir="$shrdir/shadow";
+ push(@dirs,$shadow_tstdir);
+ my $shadow_mntdir="$shadow_tstdir/mount";
+ push(@dirs,$shadow_mntdir);
+ my $shadow_basedir="$shadow_mntdir/base";
+ push(@dirs,$shadow_basedir);
+ my $shadow_shrdir="$shadow_basedir/share";
+ push(@dirs,$shadow_shrdir);
+
# this gets autocreated by winbindd
my $wbsockdir="$prefix_abs/winbindd";
my $wbsockprivdir="$lockdir/winbindd_privileged";
}
mkdir($_, 0777) foreach(@dirs);
+ my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
+
+ ##
+ ## lockdir and piddir must be 0755
+ ##
+ chmod 0755, $lockdir;
+ chmod 0755, $piddir;
+
+
##
## create ro and msdfs share layout
##
}
close(MSDFS_TARGET);
chmod 0666, $msdfs_target;
- symlink "msdfs:$server_ip\\ro-tmp", "$msdfs_shrdir/msdfs-src1";
- symlink "msdfs:$server_ip\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
+ symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
+ "$msdfs_shrdir/msdfs-src1";
+ symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
+
+ ##
+ ## create bad names in $badnames_shrdir
+ ##
+ ## (An invalid name, would be mangled to 8.3).
+ my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
+ unless (open(BADNAME_TARGET, ">$badname_target")) {
+ warn("Unable to open $badname_target");
+ return undef;
+ }
+ close(BADNAME_TARGET);
+ chmod 0666, $badname_target;
+
+ ## (A bad name, would not be mangled to 8.3).
+ my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
+ unless (open(BADNAME_TARGET, ">$badname_target")) {
+ warn("Unable to open $badname_target");
+ return undef;
+ }
+ close(BADNAME_TARGET);
+ chmod 0666, $badname_target;
+
+ ## (A bad good name).
+ my $badname_target = "$badnames_shrdir/blank.txt";
+ unless (open(BADNAME_TARGET, ">$badname_target")) {
+ warn("Unable to open $badname_target");
+ return undef;
+ }
+ close(BADNAME_TARGET);
+ chmod 0666, $badname_target;
+
+ ##
+ ## create mangleable directory names in $manglenames_shrdir
+ ##
+ my $manglename_target = "$manglenames_shrdir/foo:bar";
+ mkdir($manglename_target, 0777);
+
+ ##
+ ## create symlinks for widelinks tests.
+ ##
+ my $widelinks_target = "$widelinks_linkdir/target";
+ unless (open(WIDELINKS_TARGET, ">$widelinks_target")) {
+ warn("Unable to open $widelinks_target");
+ return undef;
+ }
+ close(WIDELINKS_TARGET);
+ chmod 0666, $widelinks_target;
+ ##
+ ## This link should get ACCESS_DENIED
+ ##
+ symlink "$widelinks_target", "$widelinks_shrdir/source";
+ ##
+ ## This link should be allowed
+ ##
+ symlink "$widelinks_shrdir", "$widelinks_shrdir/dot";
my $conffile="$libdir/server.conf";
my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
my $nss_wrapper_passwd = "$privatedir/passwd";
my $nss_wrapper_group = "$privatedir/group";
+ my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
+ my $resolv_conf = "$privatedir/resolv.conf";
+ my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
+ my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
+
my @eventlog_list = ("dns server", "application");
##
##
my ($max_uid, $max_gid);
- my ($uid_nobody, $uid_root, $uid_pdbtest);
- my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers);
+ my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2, $uid_userdup);
+ my ($uid_pdbtest_wkn);
+ my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
+ my ($gid_userdup, $gid_everyone);
- if ($unix_uid < 0xffff - 2) {
+ if ($unix_uid < 0xffff - 5) {
$max_uid = 0xffff;
} else {
$max_uid = $unix_uid;
$uid_root = $max_uid - 1;
$uid_nobody = $max_uid - 2;
$uid_pdbtest = $max_uid - 3;
+ $uid_pdbtest2 = $max_uid - 4;
+ $uid_userdup = $max_uid - 5;
+ $uid_pdbtest_wkn = $max_uid - 6;
- if ($unix_gids[0] < 0xffff - 3) {
+ if ($unix_gids[0] < 0xffff - 7) {
$max_gid = 0xffff;
} else {
$max_gid = $unix_gids[0];
$gid_nogroup = $max_gid - 2;
$gid_root = $max_gid - 3;
$gid_domusers = $max_gid - 4;
+ $gid_domadmins = $max_gid - 5;
+ $gid_userdup = $max_gid - 6;
+ $gid_everyone = $max_gid - 7;
##
## create conffile
print CONF "
[global]
netbios name = $server
- interfaces = $server_ip/8
+ interfaces = $server_ip/8 $server_ipv6/64
bind interfaces only = yes
- panic action = $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
+ panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
smbd:suicide mode = yes
workgroup = $domain
kernel oplocks = no
kernel change notify = no
+ smb2 leases = yes
- syslog = no
+ logging = file
printing = bsd
printcap name = /dev/null
- winbindd:socket dir = $wbsockdir
+ winbindd socket directory = $wbsockdir
nmbd:socket dir = $nmbdsockdir
idmap config * : range = 100000-200000
winbind enum users = yes
winbind enum groups = yes
+ winbind separator = /
# min receivefile size = 4000
store dos attributes = yes
create mask = 755
dos filemode = yes
- vfs objects = $vfs_modulesdir_abs/acl_xattr.so $vfs_modulesdir_abs/fake_acls.so $vfs_modulesdir_abs/xattr_tdb.so $vfs_modulesdir_abs/streams_depot.so
+ strict rename = yes
+ strict sync = yes
+ vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
printing = vlp
print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
lpq cache time = 0
+ print notify backchannel = yes
ncalrpc dir = $prefix_abs/ncalrpc
- resolv:host file = $dns_host_file
# The samba3.blackbox.smbclient_s3 test uses this to test that
# sending messages works, and that the %m sub works.
message command = mv %s $shrdir/message.%m
+ # fsrvp server requires registry shares
+ registry shares = yes
+
+ # Used by RPC SRVSVC tests
+ add share command = $bindir_abs/smbaddshare
+ change share command = $bindir_abs/smbchangeshare
+ delete share command = $bindir_abs/smbdeleteshare
+
+ # fruit:copyfile is a global option
+ fruit:copyfile = yes
+
+ #this does not mean that we use non-secure test env,
+ #it just means we ALLOW one to be configured.
+ allow insecure wide links = yes
+
# Begin extra options
$extra_options
# End extra options
[tmp]
path = $shrdir
comment = smb username is [%U]
+[tmpsort]
+ path = $shrdir
+ comment = Load dirsort module
+ vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
[tmpenc]
path = $shrdir
comment = encrypt smb username is [%U]
smb encrypt = required
+ vfs objects = dirsort
[tmpguest]
path = $shrdir
guest ok = yes
path = $shrdir
force user = $unix_name
guest ok = yes
+[forceuser_unixonly]
+ comment = force a user with unix user SID and group SID
+ path = $shrdir
+ force user = pdbtest
+ guest ok = yes
+[forceuser_wkngroup]
+ comment = force a user with well-known group SID
+ path = $shrdir
+ force user = pdbtest_wkn
+ guest ok = yes
[forcegroup]
path = $shrdir
force group = nogroup
[ro-tmp]
path = $ro_shrdir
guest ok = yes
+[write-list-tmp]
+ path = $shrdir
+ read only = yes
+ write list = $unix_name
+[valid-users-tmp]
+ path = $shrdir
+ valid users = $unix_name
[msdfs-share]
path = $msdfs_shrdir
msdfs root = yes
+ msdfs shuffle referrals = yes
guest ok = yes
[hideunread]
copy = tmp
kernel share modes = no
kernel oplocks = no
posix locking = no
+[fs_specific]
+ copy = tmp
+ $fs_specific_conf
[print1]
copy = tmp
printable = yes
copy = print1
[print3]
copy = print1
+ default devmode = no
[lp]
copy = print1
+
+[nfs4acl_simple]
+ path = $shrdir
+ comment = smb username is [%U]
+ nfs4:mode = simple
+ vfs objects = nfs4acl_xattr xattr_tdb
+
+[nfs4acl_special]
+ path = $shrdir
+ comment = smb username is [%U]
+ nfs4:mode = special
+ vfs objects = nfs4acl_xattr xattr_tdb
+
[xcopy_share]
path = $shrdir
comment = smb username is [%U]
force create mode = 0
directory mask = 0777
force directory mode = 0
- vfs objects = $vfs_modulesdir_abs/xattr_tdb.so
+ vfs objects = xattr_tdb
+[aio]
+ copy = tmp
+ aio read size = 1
+ aio write size = 1
[print\$]
copy = tmp
+
+[vfs_fruit]
+ path = $shrdir
+ vfs objects = catia fruit streams_xattr acl_xattr
+ ea support = yes
+ fruit:ressource = file
+ fruit:metadata = netatalk
+ fruit:locking = netatalk
+ fruit:encoding = native
+
+[badname-tmp]
+ path = $badnames_shrdir
+ guest ok = yes
+
+[manglenames_share]
+ path = $manglenames_shrdir
+ guest ok = yes
+
+[dynamic_share]
+ path = $shrdir/%R
+ guest ok = yes
+
+[widelinks_share]
+ path = $widelinks_shrdir
+ wide links = no
+ guest ok = yes
+
+[fsrvp_share]
+ path = $shrdir
+ comment = fake shapshots using rsync
+ vfs objects = shell_snap shadow_copy2
+ shell_snap:check path command = $fake_snap_pl --check
+ shell_snap:create command = $fake_snap_pl --create
+ shell_snap:delete command = $fake_snap_pl --delete
+ # a relative path here fails, the snapshot dir is no longer found
+ shadow:snapdir = $shrdir/.snapshots
+
+[shadow1]
+ path = $shadow_shrdir
+ comment = previous versions snapshots under mount point
+ vfs objects = shadow_copy2
+ shadow:mountpoint = $shadow_mntdir
+
+[shadow2]
+ path = $shadow_shrdir
+ comment = previous versions snapshots outside mount point
+ vfs objects = shadow_copy2
+ shadow:mountpoint = $shadow_mntdir
+ shadow:snapdir = $shadow_tstdir/.snapshots
+
+[shadow3]
+ path = $shadow_shrdir
+ comment = previous versions with subvolume snapshots, snapshots under base dir
+ vfs objects = shadow_copy2
+ shadow:mountpoint = $shadow_mntdir
+ shadow:basedir = $shadow_basedir
+ shadow:snapdir = $shadow_basedir/.snapshots
+
+[shadow4]
+ path = $shadow_shrdir
+ comment = previous versions with subvolume snapshots, snapshots outside mount point
+ vfs objects = shadow_copy2
+ shadow:mountpoint = $shadow_mntdir
+ shadow:basedir = $shadow_basedir
+ shadow:snapdir = $shadow_tstdir/.snapshots
+
+[shadow5]
+ path = $shadow_shrdir
+ comment = previous versions at volume root snapshots under mount point
+ vfs objects = shadow_copy2
+ shadow:mountpoint = $shadow_shrdir
+
+[shadow6]
+ path = $shadow_shrdir
+ comment = previous versions at volume root snapshots outside mount point
+ vfs objects = shadow_copy2
+ shadow:mountpoint = $shadow_shrdir
+ shadow:snapdir = $shadow_tstdir/.snapshots
+
+[shadow7]
+ path = $shadow_shrdir
+ comment = previous versions snapshots everywhere
+ vfs objects = shadow_copy2
+ shadow:mountpoint = $shadow_mntdir
+ shadow:snapdirseverywhere = yes
+
+[shadow8]
+ path = $shadow_shrdir
+ comment = previous versions using snapsharepath
+ vfs objects = shadow_copy2
+ shadow:mountpoint = $shadow_mntdir
+ shadow:snapdir = $shadow_tstdir/.snapshots
+ shadow:snapsharepath = share
+
+[shadow_wl]
+ path = $shadow_shrdir
+ comment = previous versions with wide links allowed
+ vfs objects = shadow_copy2
+ shadow:mountpoint = $shadow_mntdir
+ wide links = yes
";
close(CONF);
print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
$unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
+pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
+userdup:x:$uid_userdup:$gid_userdup:userdup gecos:$prefix_abs:/bin/false
+pdbtest_wkn:x:$uid_pdbtest_wkn:$gid_everyone:pdbtest_wkn gecos:$prefix_abs:/bin/false
";
if ($unix_uid != 0) {
- print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false";
+ print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
+";
}
close(PASSWD);
nogroup:x:$gid_nogroup:nobody
$unix_name-group:x:$unix_gids[0]:
domusers:X:$gid_domusers:
+domadmins:X:$gid_domadmins:
+userdup:x:$gid_userdup:$unix_name
+everyone:x:$gid_everyone:
";
if ($unix_gids[0] != 0) {
- print GROUP "root:x:$gid_root:";
+ print GROUP "root:x:$gid_root:
+";
}
close(GROUP);
+ ## hosts
+ my $hostname = lc($server);
+ unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
+ warn("Unable to open $nss_wrapper_hosts");
+ return undef;
+ }
+ print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
+ print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
+ close(HOSTS);
+
+ ## hosts
+ unless (open(RESOLV_CONF, ">$resolv_conf")) {
+ warn("Unable to open $resolv_conf");
+ return undef;
+ }
+ if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
+ if (defined($dc_server_ip)) {
+ print RESOLV_CONF "nameserver $dc_server_ip\n";
+ }
+ if (defined($dc_server_ipv6)) {
+ print RESOLV_CONF "nameserver $dc_server_ipv6\n";
+ }
+ } else {
+ print RESOLV_CONF "nameserver ${server_ip}\n";
+ print RESOLV_CONF "nameserver ${server_ipv6}\n";
+ }
+ close(RESOLV_CONF);
+
foreach my $evlog (@eventlog_list) {
my $evlogtdb = "$eventlogdir/$evlog.tdb";
open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
$ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
$ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
+ $ENV{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
+ $ENV{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
+ if ($ENV{SAMBA_DNS_FAKING}) {
+ $ENV{RESOLV_WRAPPER_CONF} = $resolv_conf;
+ } else {
+ $ENV{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
+ }
- my $cmd = Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
+ my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
unless (open(PWD, "|$cmd")) {
warn("Unable to set password for test account\n$cmd");
return undef;
}
print "DONE\n";
- open(HOSTS, ">>$ENV{SELFTEST_PREFIX}/dns_host_file") or die("Unable to open $ENV{SELFTEST_PREFIX}/dns_host_file");
- print HOSTS "A $server. $server_ip
-";
- close(HOSTS);
+ open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
+ print DNS_UPDATE_LIST "A $server. $server_ip\n";
+ print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
+ close(DNS_UPDATE_LIST);
$ret{SERVER_IP} = $server_ip;
+ $ret{SERVER_IPV6} = $server_ipv6;
$ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
$ret{NMBD_TEST_LOG_POS} = 0;
$ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
$ret{NETBIOSNAME} = $server;
$ret{PASSWORD} = $password;
$ret{PIDDIR} = $piddir;
- $ret{WINBINDD_SOCKET_DIR} = $wbsockdir;
+ $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
$ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
$ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
$ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
$ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
$ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
- $ret{NSS_WRAPPER_WINBIND_SO_PATH} = $ENV{NSS_WRAPPER_WINBIND_SO_PATH};
- if (not defined($ret{NSS_WRAPPER_WINBIND_SO_PATH})) {
- $ret{NSS_WRAPPER_WINBIND_SO_PATH} = Samba::bindir_path($self, "default/nsswitch/libnss-winbind.so");
- }
+ $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
+ $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
+ $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
+ $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
+ if ($ENV{SAMBA_DNS_FAKING}) {
+ $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
+ } else {
+ $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
+ }
$ret{LOCAL_PATH} = "$shrdir";
+ $ret{LOGDIR} = $logdir;
+
+ #
+ # Avoid hitting system krb5.conf -
+ # An env that needs Kerberos will reset this to the real
+ # value.
+ #
+ $ret{KRB5_CONFIG} = abs_path($prefix) . "/no_krb5.conf";
return \%ret;
}
-sub wait_for_start($$)
+sub wait_for_start($$$$$)
{
- my ($self, $envvars) = @_;
+ my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
+ my $ret;
- # give time for nbt server to register its names
- print "delaying for nbt name registration\n";
- sleep(10);
- # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
- my $nmblookup = Samba::bindir_path($self, "nmblookup3");
- system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
- system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
- system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
- system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
- system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
+ if ($nmbd eq "yes") {
+ my $count = 0;
- # make sure smbd is also up set
- print "wait for smbd\n";
+ # give time for nbt server to register its names
+ print "checking for nmbd\n";
- my $count = 0;
- my $ret;
- do {
- $ret = system(Samba::bindir_path($self, "smbclient3") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
- if ($ret != 0) {
- sleep(2);
+ # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
+ my $nmblookup = Samba::bindir_path($self, "nmblookup");
+
+ do {
+ $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
+ if ($ret != 0) {
+ sleep(1);
+ } else {
+ system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
+ system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
+ system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
+ system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
+ }
+ $count++;
+ } while ($ret != 0 && $count < 10);
+ if ($count == 10) {
+ print "NMBD not reachable after 10 retries\n";
+ teardown_env($self, $envvars);
+ return 0;
+ }
+ }
+
+ if ($winbindd eq "yes") {
+ print "checking for winbindd\n";
+ my $count = 0;
+ do {
+ $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --ping-dc");
+ if ($ret != 0) {
+ sleep(2);
+ }
+ $count++;
+ } while ($ret != 0 && $count < 10);
+ if ($count == 10) {
+ print "WINBINDD not reachable after 20 seconds\n";
+ teardown_env($self, $envvars);
+ return 0;
+ }
+ }
+
+ if ($smbd eq "yes") {
+ # make sure smbd is also up set
+ print "wait for smbd\n";
+
+ my $count = 0;
+ do {
+ $ret = system(Samba::bindir_path($self, "smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
+ if ($ret != 0) {
+ sleep(2);
+ }
+ $count++
+ } while ($ret != 0 && $count < 10);
+ if ($count == 10) {
+ print "SMBD failed to start up in a reasonable time (20sec)\n";
+ teardown_env($self, $envvars);
+ return 0;
}
- $count++
- } while ($ret != 0 && $count < 10);
- if ($count == 10) {
- print "SMBD failed to start up in a reasonable time (20sec)\n";
- teardown_env($self, $envvars);
- return 0;
}
+
# Ensure we have domain users mapped.
$ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
if ($ret != 0) {
return 1;
}
+ $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
+ if ($ret != 0) {
+ return 1;
+ }
+ $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add sid=S-1-1-0 unixgroup=everyone type=builtin");
+ if ($ret != 0) {
+ return 1;
+ }
+
+ if ($winbindd eq "yes") {
+ # note: creating builtin groups requires winbindd for the
+ # unix id allocator
+ $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
+ if ($ret != 0) {
+ print "Failed to create BUILTIN\\Users group\n";
+ return 0;
+ }
+ my $count = 0;
+ do {
+ system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache flush");
+ $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
+ if ($ret != 0) {
+ sleep(2);
+ }
+ $count++;
+ } while ($ret != 0 && $count < 10);
+ if ($count == 10) {
+ print "WINBINDD not reachable after 20 seconds\n";
+ teardown_env($self, $envvars);
+ return 0;
+ }
+ }
print $self->getlog_env($envvars);
git.samba.org / obnox / samba / samba-obnox.git / blobdiff