incorrect parameters - what does it mean? maybe created temporary file? */
#define NTCREATEX_ACTION_UNKNOWN 5
-#define SMB_MAGIC 0x424D53FF /* 0xFF 'S' 'M' 'B' */
-
-/* the basic packet size, assuming no words or bytes. Does not include the NBT header */
-#define MIN_SMB_SIZE 35
-
-/* when using NBT encapsulation every packet has a 4 byte header */
-#define NBT_HDR_SIZE 4
-
-/* offsets into message header for common items - NOTE: These have
- changed from being offsets from the base of the NBT packet to the base of the SMB packet.
- this has reduced all these values by 4
-*/
-#define HDR_COM 4
-#define HDR_RCLS 5
-#define HDR_REH 6
-#define HDR_ERR 7
-#define HDR_FLG 9
-#define HDR_FLG2 10
-#define HDR_PIDHIGH 12
-#define HDR_SS_FIELD 14
-#define HDR_TID 24
-#define HDR_PID 26
-#define HDR_UID 28
-#define HDR_MID 30
-#define HDR_WCT 32
-#define HDR_VWV 33
-
-
-/* types of buffers in core SMB protocol */
-#define SMB_DATA_BLOCK 0x1
-#define SMB_ASCII4 0x4
-
-
-/* flag defines. CIFS spec 3.1.1 */
-#define FLAG_SUPPORT_LOCKREAD 0x01
-#define FLAG_CLIENT_BUF_AVAIL 0x02
-#define FLAG_RESERVED 0x04
-#define FLAG_CASELESS_PATHNAMES 0x08
-#define FLAG_CANONICAL_PATHNAMES 0x10
-#define FLAG_REQUEST_OPLOCK 0x20
-#define FLAG_REQUEST_BATCH_OPLOCK 0x40
-#define FLAG_REPLY 0x80
-
-/* the complete */
-#define SMBmkdir 0x00 /* create directory */
-#define SMBrmdir 0x01 /* delete directory */
-#define SMBopen 0x02 /* open file */
-#define SMBcreate 0x03 /* create file */
-#define SMBclose 0x04 /* close file */
-#define SMBflush 0x05 /* flush file */
-#define SMBunlink 0x06 /* delete file */
-#define SMBmv 0x07 /* rename file */
-#define SMBgetatr 0x08 /* get file attributes */
-#define SMBsetatr 0x09 /* set file attributes */
-#define SMBread 0x0A /* read from file */
-#define SMBwrite 0x0B /* write to file */
-#define SMBlock 0x0C /* lock byte range */
-#define SMBunlock 0x0D /* unlock byte range */
-#define SMBctemp 0x0E /* create temporary file */
-#define SMBmknew 0x0F /* make new file */
-#define SMBcheckpath 0x10 /* check directory path */
-#define SMBexit 0x11 /* process exit */
-#define SMBlseek 0x12 /* seek */
-#define SMBtcon 0x70 /* tree connect */
-#define SMBtconX 0x75 /* tree connect and X*/
-#define SMBtdis 0x71 /* tree disconnect */
-#define SMBnegprot 0x72 /* negotiate protocol */
-#define SMBdskattr 0x80 /* get disk attributes */
-#define SMBsearch 0x81 /* search directory */
-#define SMBsplopen 0xC0 /* open print spool file */
-#define SMBsplwr 0xC1 /* write to print spool file */
-#define SMBsplclose 0xC2 /* close print spool file */
-#define SMBsplretq 0xC3 /* return print queue */
-#define SMBsends 0xD0 /* send single block message */
-#define SMBsendb 0xD1 /* send broadcast message */
-#define SMBfwdname 0xD2 /* forward user name */
-#define SMBcancelf 0xD3 /* cancel forward */
-#define SMBgetmac 0xD4 /* get machine name */
-#define SMBsendstrt 0xD5 /* send start of multi-block message */
-#define SMBsendend 0xD6 /* send end of multi-block message */
-#define SMBsendtxt 0xD7 /* send text of multi-block message */
-
-/* Core+ protocol */
-#define SMBlockread 0x13 /* Lock a range and read */
-#define SMBwriteunlock 0x14 /* write then range then unlock it */
-#define SMBreadbraw 0x1a /* read a block of data with no smb header */
-#define SMBwritebraw 0x1d /* write a block of data with no smb header */
-#define SMBwritec 0x20 /* secondary write request */
-#define SMBwriteclose 0x2c /* write a file then close it */
-
-/* dos extended protocol */
-#define SMBreadBraw 0x1A /* read block raw */
-#define SMBreadBmpx 0x1B /* read block multiplexed */
-#define SMBreadBs 0x1C /* read block (secondary response) */
-#define SMBwriteBraw 0x1D /* write block raw */
-#define SMBwriteBmpx 0x1E /* write block multiplexed */
-#define SMBwriteBs 0x1F /* write block (secondary request) */
-#define SMBwriteC 0x20 /* write complete response */
-#define SMBsetattrE 0x22 /* set file attributes expanded */
-#define SMBgetattrE 0x23 /* get file attributes expanded */
-#define SMBlockingX 0x24 /* lock/unlock byte ranges and X */
-#define SMBtrans 0x25 /* transaction - name, bytes in/out */
-#define SMBtranss 0x26 /* transaction (secondary request/response) */
-#define SMBioctl 0x27 /* IOCTL */
-#define SMBioctls 0x28 /* IOCTL (secondary request/response) */
-#define SMBcopy 0x29 /* copy */
-#define SMBmove 0x2A /* move */
-#define SMBecho 0x2B /* echo */
-#define SMBopenX 0x2D /* open and X */
-#define SMBreadX 0x2E /* read and X */
-#define SMBwriteX 0x2F /* write and X */
-#define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */
-#define SMBffirst 0x82 /* find first */
-#define SMBfunique 0x83 /* find unique */
-#define SMBfclose 0x84 /* find close */
-#define SMBinvalid 0xFE /* invalid command */
-
-/* Extended 2.0 protocol */
-#define SMBtrans2 0x32 /* TRANS2 protocol set */
-#define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */
-#define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */
-#define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
-#define SMBulogoffX 0x74 /* user logoff */
-
-/* NT SMB extensions. */
-#define SMBnttrans 0xA0 /* NT transact */
-#define SMBnttranss 0xA1 /* NT transact secondary */
-#define SMBntcreateX 0xA2 /* NT create and X */
-#define SMBntcancel 0xA4 /* NT cancel */
-#define SMBntrename 0xA5 /* NT rename */
-
-/* used to indicate end of chain */
-#define SMB_CHAIN_NONE 0xFF
-
/* These are the trans subcommands */
#define TRANSACT_SETNAMEDPIPEHANDLESTATE 0x01
#define TRANSACT_DCERPCCMD 0x26
#define NT_TRANSACT_RENAME 5
#define NT_TRANSACT_QUERY_SECURITY_DESC 6
-/* this is used on a TConX. I'm not sure the name is very helpful though */
-#define SMB_SUPPORT_SEARCH_BITS 0x0001
-#define SMB_SHARE_IN_DFS 0x0002
-
/* Named pipe write mode flags. Used in writeX calls. */
#define PIPE_RAW_MODE 0x4
#define PIPE_START_MESSAGE 0x8
#define RENAME_FLAG_RENAME 0x104
#define RENAME_FLAG_COPY 0x105
-/* Filesystem Attributes. */
-#define FILE_CASE_SENSITIVE_SEARCH 0x01
-#define FILE_CASE_PRESERVED_NAMES 0x02
-#define FILE_UNICODE_ON_DISK 0x04
-/* According to cifs9f, this is 4, not 8 */
-/* Acconding to testing, this actually sets the security attribute! */
-#define FILE_PERSISTENT_ACLS 0x08
-/* These entries added from cifs9f --tsb */
-#define FILE_FILE_COMPRESSION 0x10
-#define FILE_VOLUME_QUOTAS 0x20
-/* I think this is wrong. JRA #define FILE_DEVICE_IS_MOUNTED 0x20 */
-#define FILE_VOLUME_SPARSE_FILE 0x40
-#define FILE_VOLUME_IS_COMPRESSED 0x8000
-
/* ChangeNotify flags. */
#define FILE_NOTIFY_CHANGE_FILE_NAME 0x00000001
#define FILE_NOTIFY_CHANGE_DIR_NAME 0x00000002
#define BROWSER_ELECTION_VERSION 0x010f
#define BROWSER_CONSTANT 0xaa55
-/* Sercurity mode bits. */
-#define NEGOTIATE_SECURITY_USER_LEVEL 0x01
-#define NEGOTIATE_SECURITY_CHALLENGE_RESPONSE 0x02
-#define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04
-#define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08
-
-/* CIFS protocol capabilities */
-#define CAP_RAW_MODE 0x00000001
-#define CAP_MPX_MODE 0x00000002
-#define CAP_UNICODE 0x00000004
-#define CAP_LARGE_FILES 0x00000008
-#define CAP_NT_SMBS 0x00000010
-#define CAP_RPC_REMOTE_APIS 0x00000020
-#define CAP_STATUS32 0x00000040
-#define CAP_LEVEL_II_OPLOCKS 0x00000080
-#define CAP_LOCK_AND_READ 0x00000100
-#define CAP_NT_FIND 0x00000200
-#define CAP_DFS 0x00001000
-#define CAP_W2K_SMBS 0x00002000
-#define CAP_LARGE_READX 0x00004000
-#define CAP_LARGE_WRITEX 0x00008000
-#define CAP_UNIX 0x00800000 /* Capabilities for UNIX extensions. Created by HP. */
-#define CAP_EXTENDED_SECURITY 0x80000000
-
/*
* Global value meaning that the smb_uid field should be
* ingored (in share level security and protocol level == CORE)
#define UID_FIELD_INVALID 0
-/* Lock types. */
-#define LOCKING_ANDX_EXCLUSIVE_LOCK 0x00
-#define LOCKING_ANDX_SHARED_LOCK 0x01
-#define LOCKING_ANDX_OPLOCK_RELEASE 0x02
-#define LOCKING_ANDX_CHANGE_LOCKTYPE 0x04
-#define LOCKING_ANDX_CANCEL_LOCK 0x08
-#define LOCKING_ANDX_LARGE_FILES 0x10
-
-/*
- * Bits we test with.
- */
-
-#define OPLOCK_NONE 0
-#define OPLOCK_EXCLUSIVE 1
-#define OPLOCK_BATCH 2
-#define OPLOCK_LEVEL_II 4
-
-#define CORE_OPLOCK_GRANTED (1<<5)
-#define EXTENDED_OPLOCK_GRANTED (1<<15)
-
-/*
- * Return values for oplock types.
- */
-
-#define NO_OPLOCK_RETURN 0
-#define EXCLUSIVE_OPLOCK_RETURN 1
-#define BATCH_OPLOCK_RETURN 2
-#define LEVEL_II_OPLOCK_RETURN 3
-
-/* oplock levels sent in oplock break */
-#define OPLOCK_BREAK_TO_NONE 0
-#define OPLOCK_BREAK_TO_LEVEL_II 1
-
-
-#define CMD_REPLY 0x8000
-
/* The maximum length of a trust account password.
Used when we randomly create it, 15 char passwords
exceed NT4's max password length */
git.samba.org / mat / samba.git / blobdiff