ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoring
authorRoger Quadros <rogerq@ti.com>
Tue, 2 Sep 2014 13:57:05 +0000 (16:57 +0300)
committerTony Lindgren <tony@atomide.com>
Thu, 4 Sep 2014 19:39:15 +0000 (12:39 -0700)
NAND uses wait pin only to indicate device readiness after
a block/page operation. It is not use to extend individual
read/write cycle and so read/write wait pin monitoring must
be disabled for NAND.

Add gpmc wait pin information as the NAND uses wait pin 0
for device ready indication.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Pekon Gupta <pekon@pek-sem.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/boot/dts/am43x-epos-evm.dts

index f6c98985b5c746f2da8a0040aca541ac6eee510c..b489b278f18438017d3f985071263117456d2eb8 100644 (file)
                gpmc,access-ns = <30>; /* tCEA + 4*/
                gpmc,rd-cycle-ns = <40>;
                gpmc,wr-cycle-ns = <40>;
-               gpmc,wait-on-read = "true";
-               gpmc,wait-on-write = "true";
+               gpmc,wait-pin = <0>;
                gpmc,bus-turnaround-ns = <0>;
                gpmc,cycle2cycle-delay-ns = <0>;
                gpmc,clk-activation-ns = <0>;