From: Paolo Abeni Date: Tue, 5 Mar 2024 11:23:45 +0000 (+0100) Subject: Merge branch 'mt7530-dsa-subdriver-improvements-act-iii' X-Git-Tag: 6.9-rc-smb3-client-fixes-part2~38^2~112 X-Git-Url: http://git.samba.org/?a=commitdiff_plain;h=9452c8b459f4641156a09c2212a835a6df2a137e;p=sfrench%2Fcifs-2.6.git Merge branch 'mt7530-dsa-subdriver-improvements-act-iii' says: ==================== MT7530 DSA Subdriver Improvements Act III This is the third patch series with the goal of simplifying the MT7530 DSA subdriver and improving support for MT7530, MT7531, and the switch on the MT7988 SoC. I have done a simple ping test to confirm basic communication on all switch ports on MCM and standalone MT7530, and MT7531 switch with this patch series applied. MT7621 Unielec, MCM MT7530: rgmii-only-gmac0-mt7621-unielec-u7621-06-16m.dtb gmac0-and-gmac1-mt7621-unielec-u7621-06-16m.dtb tftpboot 0x80008000 mips-uzImage.bin; tftpboot 0x83000000 mips-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000 MT7622 Bananapi, MT7531: gmac0-and-gmac1-mt7622-bananapi-bpi-r64.dtb tftpboot 0x40000000 arm64-Image; tftpboot 0x45000000 arm64-rootfs.cpio.uboot; tftpboot 0x4a000000 $dtb; booti 0x40000000 0x45000000 0x4a000000 MT7623 Bananapi, standalone MT7530: rgmii-only-gmac0-mt7623n-bananapi-bpi-r2.dtb gmac0-and-gmac1-mt7623n-bananapi-bpi-r2.dtb tftpboot 0x80008000 arm-zImage; tftpboot 0x83000000 arm-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootz 0x80008000 0x83000000 0x83f00000 This patch series is the continuation of the patch series linked below. https://lore.kernel.org/r/20230522121532.86610-1-arinc.unal@arinc9.com Signed-off-by: Arınç ÜNAL --- Changes in v3: - Patch 8 - Explain properly the behaviour of setting link down on all ports at setup. - Split the changes for simplifying the link settings operations out to another patch. - Link to v2: https://lore.kernel.org/r/20240216-for-netnext-mt7530-improvements-3-v2-0-094cae3ff23b@arinc9.com Changes in v2: - Patch 8 - Use a single mt7530_rmw() instead of two mt7530_clear() and mt7530_set() commands. - Link to v1: https://lore.kernel.org/r/20240208-for-netnext-mt7530-improvements-3-v1-0-d7c1cfd502ca@arinc9.com ==================== Link: https://lore.kernel.org/r/20240301-for-netnext-mt7530-improvements-3-v3-0-449f4f166454@arinc9.com Signed-off-by: Paolo Abeni --- 9452c8b459f4641156a09c2212a835a6df2a137e