eth: bnxt: support per-queue statistics

Support per-queue statistics API in bnxt.

$ ethtool -S eth0
NIC statistics:
     [0]: rx_ucast_packets: 1418
     [0]: rx_mcast_packets: 178
     [0]: rx_bcast_packets: 0
     [0]: rx_discards: 0
     [0]: rx_errors: 0
     [0]: rx_ucast_bytes: 1141815
     [0]: rx_mcast_bytes: 16766
     [0]: rx_bcast_bytes: 0
     [0]: tx_ucast_packets: 1734
...

$ ./cli.py --spec netlink/specs/netdev.yaml \
   --dump qstats-get --json '{"scope": "queue"}'
[{'ifindex': 2,
  'queue-id': 0,
  'queue-type': 'rx',
  'rx-alloc-fail': 0,
  'rx-bytes': 1164931,
  'rx-packets': 1641},
...
 {'ifindex': 2,
  'queue-id': 0,
  'queue-type': 'tx',
  'tx-bytes': 631494,
  'tx-packets': 1771},
...

Reset the per queue counters:
$ ethtool -L eth0 combined 4

Inspect again:

$ ./cli.py --spec netlink/specs/netdev.yaml \
   --dump qstats-get --json '{"scope": "queue"}'
[{'ifindex': 2,
  'queue-id': 0,
  'queue-type': 'rx',
  'rx-alloc-fail': 0,
  'rx-bytes': 32397,
  'rx-packets': 145},
...
 {'ifindex': 2,
  'queue-id': 0,
  'queue-type': 'tx',
  'tx-bytes': 37481,
  'tx-packets': 196},
...

$ ethtool -S eth0 | head
NIC statistics:
     [0]: rx_ucast_packets: 174
     [0]: rx_mcast_packets: 3
     [0]: rx_bcast_packets: 0
     [0]: rx_discards: 0
     [0]: rx_errors: 0
     [0]: rx_ucast_bytes: 37151
     [0]: rx_mcast_bytes: 267
     [0]: rx_bcast_bytes: 0
     [0]: tx_ucast_packets: 267
...

Totals are still correct:

$ ./cli.py --spec netlink/specs/netdev.yaml --dump qstats-get
[{'ifindex': 2,
  'rx-alloc-fail': 0,
  'rx-bytes': 281949995,
  'rx-packets': 216524,
  'tx-bytes': 52694905,
  'tx-packets': 75546}]
$ ip -s link show dev eth0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
    link/ether 14:23:f2:61:05:40 brd ff:ff:ff:ff:ff:ff
    RX:  bytes packets errors dropped  missed   mcast
     282519546  218100      0       0       0     516
    TX:  bytes packets errors dropped carrier collsns
      53323054   77674      0       0       0       0

Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netdev: add queue stat for alloc failures

Rx alloc failures are commonly counted by drivers.
Support reporting those via netdev-genl queue stats.

Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netdev: add per-queue statistics

The ethtool-nl family does a good job exposing various protocol
related and IEEE/IETF statistics which used to get dumped under
ethtool -S, with creative names. Queue stats don't have a netlink
API, yet, and remain a lion's share of ethtool -S output for new
drivers. Not only is that bad because the names differ driver to
driver but it's also bug-prone. Intuitively drivers try to report
only the stats for active queues, but querying ethtool stats
involves multiple system calls, and the number of stats is
read separately from the stats themselves. Worse still when user
space asks for values of the stats, it doesn't inform the kernel
how big the buffer is. If number of stats increases in the meantime
kernel will overflow user buffer.

Add a netlink API for dumping queue stats. Queue information is
exposed via the netdev-genl family, so add the stats there.
Support per-queue and sum-for-device dumps. Latter will be useful
when subsequent patches add more interesting common stats than
just bytes and packets.

The API does not currently distinguish between HW and SW stats.
The expectation is that the source of the stats will either not
matter much (good packets) or be obvious (skb alloc errors).

Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-group-together-hot-data'

Eric Dumazet says:

====================
net: group together hot data

While our recent structure reorganizations were focused
on increasing max throughput, there is still an
area where improvements are much needed.

In many cases, a cpu handles one packet at a time,
instead of a nice batch.

Hardware interrupt.
 -> Software interrupt.
   -> Network/Protocol stacks.

If the cpu was idle or busy in other layers,
it has to pull many cache lines.

This series adds a new net_hotdata structure, where
some critical (and read-mostly) data used in
rx and tx path is packed in a small number of cache lines.

Synthetic benchmarks will not see much difference,
but latency of single packet should improve.

net_hodata current size on 64bit is 416 bytes,
but might grow in the future.

Also move RPS definitions to a new include file.
====================

Link: https://lore.kernel.org/r/20240306160031.874438-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: move rps_sock_flow_table to net_hotdata

rps_sock_flow_table and rps_cpu_mask are used in fast path.

Move them to net_hotdata for better cache locality.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-19-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: introduce include/net/rps.h

Move RPS related structures and helpers from include/linux/netdevice.h
and include/net/sock.h to a new include file.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-18-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: move tcp_ipv6_hash_secret and udp_ipv6_hash_secret to net_hotdata

Use a 32bit hole in "struct net_offload" to store
the remaining 32bit secrets used by TCPv6 and UDPv6.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-17-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: move inet6_ehash_secret and udp6_ehash_secret into net_hotdata

"struct inet6_protocol" has a 32bit hole in 32bit arches.

Use it to store the 32bit secret used by UDP and TCP,
to increase cache locality in rx path.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-16-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

inet: move inet_ehash_secret and udp_ehash_secret into net_hotdata

"struct net_protocol" has a 32bit hole in 32bit arches.

Use it to store the 32bit secret used by UDP and TCP,
to increase cache locality in rx path.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-15-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

inet: move tcp_protocol and udp_protocol to net_hotdata

These structures are read in rx path, move them to net_hotdata
for better cache locality.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-14-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: move tcpv6_protocol and udpv6_protocol to net_hotdata

These structures are read in rx path, move them to net_hotdata
for better cache locality.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-13-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

udp: move udpv4_offload and udpv6_offload to net_hotdata

These structures are used in GRO and GSO paths.
Move them to net_hodata for better cache locality.

v2: udpv6_offload definition depends on CONFIG_INET=y

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-12-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: move skbuff_cache(s) to net_hotdata

skbuff_cache, skbuff_fclone_cache and skb_small_head_cache
are used in rx/tx fast paths.

Move them to net_hotdata for better cache locality.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: move dev_rx_weight to net_hotdata

dev_rx_weight is read from process_backlog().

Move it to net_hotdata for better cache locality.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: move dev_tx_weight to net_hotdata

dev_tx_weight is used in tx fast path.

Move it to net_hotdata for better cache locality.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: move tcpv4_offload and tcpv6_offload to net_hotdata

These are used in TCP fast paths.

Move them into net_hotdata for better cache locality.

v2: tcpv6_offload definition depends on CONFIG_INET

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: move ip_packet_offload and ipv6_packet_offload to net_hotdata

These structures are used in GRO and GSO paths.

v2: ipv6_packet_offload definition depends on CONFIG_INET

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: move netdev_max_backlog to net_hotdata

netdev_max_backlog is used in rx fat path.

Move it to net_hodata for better cache locality.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: move ptype_all into net_hotdata

ptype_all is used in rx/tx fast paths.

Move it to net_hotdata for better cache locality.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: move netdev_tstamp_prequeue into net_hotdata

netdev_tstamp_prequeue is used in rx path.

Move it to net_hotdata for better cache locality.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: move netdev_budget and netdev_budget to net_hotdata

netdev_budget and netdev_budget are used in rx path (net_rx_action())

Move them into net_hotdata for better cache locality.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: introduce struct net_hotdata

Instead of spreading networking critical fields
all over the places, add a custom net_hotdata
structure so that we can precisely control its layout.

In this first patch, move :

- gro_normal_batch used in rx (GRO stack)
- offload_base used in rx and tx (GRO and TSO stacks)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'selftests-mptcp-share-code-and-fix-shellcheck-warnings'

Matthieu Baerts says:

====================
selftests: mptcp: share code and fix shellcheck warnings

This series cleans MPTCP selftests code.

Patch 1 stops using 'iptables-legacy' if available, but uses 'iptables',
which is likely 'iptables-nft' behind.

Patches 2, 4 and 6 move duplicated code to mptcp_lib.sh. Patch 3 is a
preparation for patch 4, and patch 5 adds generic actions at the
creation and deletion of netns.

Patches 7 to 11 disable a few shellcheck warnings, and fix the rest, so
it is easy to spot real issues later. MPTCP CI is checking that now.

Patch 12 avoids redoing some actions at init time twice, e.g. restarting
the pm events tool.

v1: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v1-0-66618ea5504e@kernel.org
====================

Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-0-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: userspace pm: avoid relaunching pm events

'make_connection' is launched twice: once for IPv4, once for IPv6.

But then, the "pm_nl_ctl events" was launched a first time, killed, then
relaunched after for no particular reason.

We can then move this code, and the generation of the temp file to
exchange, to the init part, and remove extra conditions that no longer
needed.

Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-12-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: simult flows: fix shellcheck warnings

shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.

Here, two categories of warnings are now ignored:

- SC2317: Command appears to be unreachable. The cleanup() function is
  invoked indirectly via the EXIT trap.

- SC2086: Double quote to prevent globbing and word splitting. This is
  recommended, but the current usage is correct and there is no need to
  do all these modifications to be compliant with this rule.

For the modifications:

  - SC2034: ksft_skip appears unused.
  - SC2004: $/${} is unnecessary on arithmetic variables.

Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.

Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-11-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: pm netlink: fix shellcheck warnings

shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.

Here, two categories of warnings are now ignored:

- SC2317: Command appears to be unreachable. The cleanup() function is
  invoked indirectly via the EXIT trap.

- SC2086: Double quote to prevent globbing and word splitting. This is
  recommended, but the current usage is correct and there is no need to
  do all these modifications to be compliant with this rule.

For the modifications:

  - SC2034: ksft_skip appears unused.
  - SC2154: optstring is referenced but not assigned.
  - SC2006: Use $(...) notation instead of legacy backticks `...`.

Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.

Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-10-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: sockopt: fix shellcheck warnings

shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.

Here, two categories of warnings are now ignored:

- SC2317: Command appears to be unreachable. The cleanup() function is
  invoked indirectly via the EXIT trap.

- SC2086: Double quote to prevent globbing and word splitting. This is
  recommended, but the current usage is correct and there is no need to
  do all these modifications to be compliant with this rule.

For the modifications:

  - SC2034: ksft_skip appears unused.
  - SC2006: Use $(...) notation instead of legacy backticks `...`.
  - SC2145: Argument mixes string and array. Use * or separate argument.

Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.

Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-9-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: connect: fix shellcheck warnings

shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.

Here, two categories of warnings are now ignored:

- SC2317: Command appears to be unreachable. The cleanup() function is
  invoked indirectly via the EXIT trap.

- SC2086: Double quote to prevent globbing and word splitting. This is
  recommended, but the current usage is correct and there is no need to
  do all these modifications to be compliant with this rule.

For the modifications:

  - SC2034: ksft_skip appears unused.
  - SC2181: Check exit code directly with e.g. 'if mycmd;', not
            indirectly with $?.
  - SC2004: $/${} is unnecessary on arithmetic variables.
  - SC2155: Declare and assign separately to avoid masking return
            values.
  - SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
  - SC2059: Don't use variables in the printf format string. Use printf
            '..%s..' "$foo".

Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.

Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-8-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: diag: fix shellcheck warnings

shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.

Here, two categories of warnings are now ignored:

- SC2317: Command appears to be unreachable. The cleanup() function is
  invoked indirectly via the EXIT trap.

- SC2086: Double quote to prevent globbing and word splitting. This is
  recommended, but the current usage is correct and there is no need to
  do all these modifications to be compliant with this rule.

For the modifications:

  - SC2034: ksft_skip appears unused.
  - SC2046: Quote '$(get_msk_inuse)' to prevent word splitting.
  - SC2006: Use $(...) notation instead of legacy backticks `...`.

Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.

Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-7-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: add mptcp_lib_events helper

To avoid duplicated code in different MPTCP selftests, we can add and
use helpers defined in mptcp_lib.sh.

This patch unifies "pm_nl_ctl events" related code in userspace_pm.sh
and mptcp_join.sh into a helper mptcp_lib_events(). Define it in
mptcp_lib.sh and use it in both scripts.

Note that mptcp_lib_kill_wait is now call before starting 'events' for
mptcp_join.sh as well, but that's fine: each test is started from a new
netns, so there will not be any existing pid there, and nothing is done
when mptcp_lib_kill_wait is called with 0.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-6-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: more operations in ns_init/exit

Set more the default sysctl values in mptcp_lib_ns_init(). It is fine to
do that everywhere, because they could be overridden latter if needed.

mptcp_lib_ns_exit() now also try to remove temp netns files used for the
stats even for selftests not using them. That's fine to do that because
these files have a unique name.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-5-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: add mptcp_lib_ns_init/exit helpers

Add helpers mptcp_lib_ns_init() and mptcp_lib_ns_exit() in mptcp_lib.sh
to initialize and delete the given namespaces. Then every test script
can invoke these helpers and use all namespaces.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-4-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: add local variables rndh

This patch adds local variables rndh in do_transfer() functions both in
mptcp_connect.sh and simult_flows.sh, setting it with ${ns1:4}, not the
global variable rndh. The global one is hidden in the next commit.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-3-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: add mptcp_lib_check_tools helper

This patch exports check_tools() helper from mptcp_join.sh into
mptcp_lib.sh as a public one mptcp_lib_check_tools(). The arguments
"ip", "ss", "iptables" and "ip6tables" are passed into this helper
to indicate whether to check ip tool, ss tool, iptables and ip6tables
tools.

This helper can be used in every scripts.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-2-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: stop forcing iptables-legacy

Commit 0c4cd3f86a40 ("selftests: mptcp: join: use 'iptables-legacy' if
available") and commit a5a5990c099d ("selftests: mptcp: sockopt: use
'iptables-legacy' if available") forced using iptables-legacy if
available.

This was needed because of some issues that were visible when testing
the kselftests on a v5.15.x with iptables-nft as default backend. It
looks like these errors are no longer present. As mentioned by Pablo [1],
the errors were maybe due to missing kernel config. We can then use
iptables-nft if it is the default one, instead of using a legacy tool.

We can then check the variables iptables and ip6tables are valid. We can
keep the variables to easily change it later or add options.

Link: https://lore.kernel.org/netdev/ZbFiixyMFpQnxzCH@calendula/
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-1-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'rxrpc-iothread-20240305' of git://git./linux/kernel/git/dhowells/linux-fs

David Howells says:

====================
Here are some changes to AF_RXRPC:

 (1) Cache the transmission serial number of ACK and DATA packets in the
     rxrpc_txbuf struct and log this in the retransmit tracepoint.

 (2) Don't use atomics on rxrpc_txbuf::flags[*] and cache the intended wire
     header flags there too to avoid duplication.

 (3) Cache the wire checksum in rxrpc_txbuf to make it easier to create
     jumbo packets in future (which will require altering the wire header
     to a jumbo header and restoring it back again for retransmission).

 (4) Fix the protocol names in the wire ACK trailer struct.

 (5) Strip all the barriers and atomics out of the call timer tracking[*].

 (6) Remove atomic handling from call->tx_transmitted and
     call->acks_prev_seq[*].

 (7) Don't bother resetting the DF flag after UDP packet transmission.  To
     change it, we now call directly into UDP code, so it's quick just to
     set it every time.

 (8) Merge together the DF/non-DF branches of the DATA transmission to
     reduce duplication in the code.

 (9) Add a kvec array into rxrpc_txbuf and start moving things over to it.
     This paves the way for using page frags.

(10) Split (sub)packet preparation and timestamping out of the DATA
     transmission function.  This helps pave the way for future jumbo
     packet generation.

(11) In rxkad, don't pick values out of the wire header stored in
     rxrpc_txbuf, buf rather find them elsewhere so we can remove the wire
     header from there.

(12) Move rxrpc_send_ACK() to output.c so that it can be merged with
     rxrpc_send_ack_packet().

(13) Use rxrpc_txbuf::kvec[0] to access the wire header for the packet
     rather than directly accessing the copy in rxrpc_txbuf.  This will
     allow that to be removed to a page frag.

(14) Switch from keeping the transmission buffers in rxrpc_txbuf allocated
     in the slab to allocating them using page fragment allocators.  There
     are separate allocators for DATA packets (which persist for a while)
     and control packets (which are discarded immediately).

     We can then turn on MSG_SPLICE_PAGES when transmitting DATA and ACK
     packets.

     We can also get rid of the RCU cleanup on rxrpc_txbufs, preferring
     instead to release the page frags as soon as possible.

(15) Parse received packets before handling timeouts as the former may
     reset the latter.

(16) Make sure we don't retransmit DATA packets after all the packets have
     been ACK'd.

(17) Differentiate traces for PING ACK transmission.

(18) Switch to keeping timeouts as ktime_t rather than a number of jiffies
     as the latter is too coarse a granularity.  Only set the call timer at
     the end of the call event function from the aggregate of all the
     timeouts, thereby reducing the number of timer calls made.  In future,
     it might be possible to reduce the number of timers from one per call
     to one per I/O thread and to use a high-precision timer.

(19) Record RTT probes after successful transmission rather than recording
     it before and then cancelling it after if unsuccessful[*].  This
     allows a number of calls to get the current time to be removed.

(20) Clean up the resend algorithm as there's now no need to walk the
     transmission buffer under lock[*].  DATA packets can be retransmitted
     as soon as they're found rather than being queued up and transmitted
     when the locked is dropped.

(21) When initially parsing a received ACK packet, extract some of the
     fields from the ack info to the skbuff private data.  This makes it
     easier to do path MTU discovery in the future when the call to which a
     PING RESPONSE ACK refers has been deallocated.

[*] Possible with the move of almost all code from softirq context to the
    I/O thread.

Link: https://lore.kernel.org/r/20240301163807.385573-1-dhowells@redhat.com/
Link: https://lore.kernel.org/r/20240304084322.705539-1-dhowells@redhat.com/
* tag 'rxrpc-iothread-20240305' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (21 commits)
  rxrpc: Extract useful fields from a received ACK to skb priv data
  rxrpc: Clean up the resend algorithm
  rxrpc: Record probes after transmission and reduce number of time-gets
  rxrpc: Use ktimes for call timeout tracking and set the timer lazily
  rxrpc: Differentiate PING ACK transmission traces.
  rxrpc: Don't permit resending after all Tx packets acked
  rxrpc: Parse received packets before dealing with timeouts
  rxrpc: Do zerocopy using MSG_SPLICE_PAGES and page frags
  rxrpc: Use rxrpc_txbuf::kvec[0] instead of rxrpc_txbuf::wire
  rxrpc: Move rxrpc_send_ACK() to output.c with rxrpc_send_ack_packet()
  rxrpc: Don't pick values out of the wire header when setting up security
  rxrpc: Split up the DATA packet transmission function
  rxrpc: Add a kvec[] to the rxrpc_txbuf struct
  rxrpc: Merge together DF/non-DF branches of data Tx function
  rxrpc: Do lazy DF flag resetting
  rxrpc: Remove atomic handling on some fields only used in I/O thread
  rxrpc: Strip barriers and atomics off of timer tracking
  rxrpc: Fix the names of the fields in the ACK trailer struct
  rxrpc: Note cksum in txbuf
  rxrpc: Convert rxrpc_txbuf::flags into a mask and don't use atomics
  ...
====================

Link: https://lore.kernel.org/r/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: usbnet: Remove generic .ndo_get_stats64

Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.

Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.

Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20240306142643.2429409-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: usbnet: Leverage core stats allocator

With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Remove the allocation in the usbnet driver and leverage the network
core allocation instead.

Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20240306142643.2429409-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dpll: spec: use proper enum for pin capabilities attribute

The enum is defined, however the pin capabilities attribute does
refer to it. Add this missing enum field.

This fixes ynl cli output:

Example current output:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml --do pin-get --json '{"id": 0}'
{'capabilities': 4,
 ...
Example new output:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml --do pin-get --json '{"id": 0}'
{'capabilities': {'state-can-change'},
 ...

Fixes: 3badff3a25d8 ("dpll: spec: Add Netlink spec in YAML")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240306120739.1447621-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: mv88e6xxx: update 88e6185 PCS driver to use neg_mode

Update the Marvell 88e6185 PCS driver to use neg_mode rather than the
mode argument to match the other updated PCS drivers.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1rhosE-003yuc-FM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: pcs: rzn1-miic: update PCS driver to use neg_mode

Update the RZN1-MIIC PCS driver to use neg_mode rather than the mode
argument to match the other updated PCS drivers.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1rhos9-003yuW-Az@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: marvell: add comment about m88e1111_config_init_1000basex()

The comment in m88e1111_config_init_1000basex() is wrong - it claims
that Autoneg will be enabled, but this doesn't actually happen.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1rhos4-003yuQ-5p@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netlink: let core handle error cases in dump operations

After commit b5a899154aa9 ("netlink: handle EMSGSIZE errors
in the core"), we can remove some code that was not 100 % correct
anyway.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306102426.245689-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/net: fix waiting time for ipv6_gc test in fib_tests.sh.

ipv6_gc fails occasionally. According to the study, fib6_run_gc() using
jiffies_round() to round the GC interval could increase the waiting time up
to 750ms (3/4 seconds). The timer has a granularity of 512ms at the range
4s to 32s. That means a route with an expiration time E seconds can wait
for more than E * 2 + 1 seconds if the GC interval is also E seconds.

E * 2 + 2 seconds should be enough for waiting for removing routes.

Also remove a check immediately after replacing 5 routes since it is very
likely to remove some of routes before completing the last route with a
slow environment.

Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240305183949.258473-1-thinker.li@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mpls: Do not orphan the skb

We observed that TCP-pacing was falling back to the TCP-layer pacing
instead of utilizing sch_fq for the pacing. This causes significant
CPU-usage due to the hrtimer running on a per-TCP-connection basis.

The issue is that mpls_xmit() calls skb_orphan() and thus sets
skb->sk to NULL. Which implies that many of the goodies of TCP won't
work. Pacing falls back to TCP-layer pacing. TCP Small Queues does not
work, ...

It is safe to remove this call to skb_orphan() in mpls_xmit() as there
really is not reason for it to be there. It appears that this call to
skb_orphan comes from the very initial implementation of MPLS.

Cc: Roopa Prabhu <roopa@nvidia.com>
Reported-by: Craig Taylor <cmtaylor@apple.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Link: https://lore.kernel.org/r/20240306181117.77419-1-cpaasch@apple.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: Leverage core stats allocator

With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core
and convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Remove the allocation in the DSA user network device code and leverage
the network core allocation instead.

Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240306200416.2973179-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

atm: fore200e: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240306212344.97985-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'tools-net-ynl-add-support-for-nlctrl-netlink-family'

Donald Hunter says:

====================
tools/net/ynl: Add support for nlctrl netlink family

This series adds a new YNL spec for the nlctrl family, plus some fixes
and enhancements for ynl.

Patch 1 fixes an extack decoding bug
Patch 2 gives cleaner netlink error reporting
Patch 3 fixes an array-nest codegen bug
Patch 4 adds nest-type-value support to ynl
Patch 5 fixes the ynl schemas to allow empty enum-name attrs
Patch 6 contains the nlctrl spec
====================

Link: https://lore.kernel.org/r/20240306231046.97158-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

doc/netlink/specs: Add spec for nlctrl netlink family

Add a spec for the nlctrl family.

Example usage:

./tools/net/ynl/cli.py \
    --spec Documentation/netlink/specs/nlctrl.yaml \
    --do getfamily --json '{"family-name": "nlctrl"}'

./tools/net/ynl/cli.py \
    --spec Documentation/netlink/specs/nlctrl.yaml \
    --dump getpolicy --json '{"family-name": "nlctrl"}'

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-7-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

doc/netlink: Allow empty enum-name in ynl specs

Update the ynl schemas to allow the specification of empty enum names
for all enum code generation.

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-6-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tools/net/ynl: Add nest-type-value decoding

The nlctrl genetlink-legacy family uses nest-type-value encoding as
described in Documentation/userspace-api/netlink/genetlink-legacy.rst

Add nest-type-value decoding to ynl.

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tools/net/ynl: Fix c codegen for array-nest

ynl-gen-c generates e.g. 'calloc(mcast_groups, sizeof(*dst->mcast_groups))'
for array-nest attrs when it should be 'n_mcast_groups'.

Add a 'n_' prefix in the generated code for array-nests.

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tools/net/ynl: Report netlink errors without stacktrace

ynl does not handle NlError exceptions so they get reported like program
failures. Handle the NlError exceptions and report the netlink errors
more cleanly.

Example now:

Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
error: -2 extack: {'bad-attr': '.op'}

Example before:

Traceback (most recent call last):
  File "/home/donaldh/net-next/./tools/net/ynl/cli.py", line 81, in <module>
    main()
  File "/home/donaldh/net-next/./tools/net/ynl/cli.py", line 69, in main
    reply = ynl.dump(args.dump, attrs)
            ^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/home/donaldh/net-next/tools/net/ynl/lib/ynl.py", line 906, in dump
    return self._op(method, vals, [], dump=True)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/home/donaldh/net-next/tools/net/ynl/lib/ynl.py", line 872, in _op
    raise NlError(nl_msg)
lib.ynl.NlError: Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
error: -2 extack: {'bad-attr': '.op'}

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tools/net/ynl: Fix extack decoding for netlink-raw

Extack decoding was using a hard-coded msg header size of 20 but
netlink-raw has a header size of 16.

Use a protocol specific msghdr_size() when decoding the attr offssets.

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'isdn-constify-struct-class-usage'

Ricardo B. Marliere says:

====================
isdn: constify struct class usage

This is a simple and straight forward cleanup series that aims to make the
class structures in isdn constant. This has been possible since 2023 [1].

[1]: https://lore.kernel.org/all/2023040248-customary-release-4aec@gregkh/
====================

Link: https://lore.kernel.org/r/20240305-class_cleanup-isdn-v1-0-6f0edca75b61@marliere.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

isdn: capi: make capi_class constant

Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the capi_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240305-class_cleanup-isdn-v1-2-6f0edca75b61@marliere.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

isdn: mISDN: make elements_class constant

Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the elements_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240305-class_cleanup-isdn-v1-1-6f0edca75b61@marliere.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dt-bindings: net: dp83822: change ti,rmii-mode description

Drop reference to the 25MHz clock as it has nothing to do with connecting
the PHY and the MAC.
Add info about the reference clock direction between the PHY and the MAC
as it depends on the selected rmii mode.

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jérémie Dautheribes <jeremie.dautheribes@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240305141309.127669-1-jeremie.dautheribes@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: x25: remove dead links from Kconfig

Remove the "You can read more about X.25 at" links provided in
Kconfig as they have not pointed at any relevant pages for quite
a while.

An old copy of https://www.sangoma.com/tutorials/x25/ can be
retrieved via https://archive.org/web/ but nothing useful seems
to have been preserved for http://docwiki.cisco.com/wiki/X.25

For the sake of necromancy and those who really did want to
read more about X.25, a previous incarnation of Kconfig included
a link to:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/cbook/cx25.htm

Which can still be read at:
https://web.archive.org/web/20071013101232/http://cisco.com/en/US/docs/ios/11_0/router/configuration/guide/cx25.html

Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20240306112659.25375-1-justin.swartz@risingedge.co.za
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tools: ynl: check for overflow of constructed messages

Donald points out that we don't check for overflows.
Stash the length of the message on nlmsg_pid (nlmsg_seq would
do as well). This allows the attribute helpers to remain
self-contained (no extra arguments). Also let the put
helpers continue to return nothing. The error is checked
only in (newly introduced) ynl_msg_end().

Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240305185000.964773-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge git://git./linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

net/core/page_pool_user.c
  0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
  429679dcf7d9 ("page_pool: fix netlink dump stop/resume")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-6.8-rc8' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf, ipsec and netfilter.

  No solution yet for the stmmac issue mentioned in the last PR, but it
  proved to be a lockdep false positive, not a blocker.

  Current release - regressions:

   - dpll: move all dpll<>netdev helpers to dpll code, fix build
     regression with old compilers

  Current release - new code bugs:

   - page_pool: fix netlink dump stop/resume

  Previous releases - regressions:

   - bpf: fix verifier to check bpf_func_state->callback_depth when
     pruning states as otherwise unsafe programs could get accepted

   - ipv6: avoid possible UAF in ip6_route_mpath_notify()

   - ice: reconfig host after changing MSI-X on VF

   - mlx5:
       - e-switch, change flow rule destination checking
       - add a memory barrier to prevent a possible null-ptr-deref
       - switch to using _bh variant of of spinlock where needed

  Previous releases - always broken:

   - netfilter: nf_conntrack_h323: add protection for bmp length out of
     range

   - bpf: fix to zero-initialise xdp_rxq_info struct before running XDP
     program in CPU map which led to random xdp_md fields

   - xfrm: fix UDP encapsulation in TX packet offload

   - netrom: fix data-races around sysctls

   - ice:
       - fix potential NULL pointer dereference in ice_bridge_setlink()
       - fix uninitialized dplls mutex usage

   - igc: avoid returning frame twice in XDP_REDIRECT

   - i40e: disable NAPI right after disabling irqs when handling
     xsk_pool

   - geneve: make sure to pull inner header in geneve_rx()

   - sparx5: fix use after free inside sparx5_del_mact_entry

   - dsa: microchip: fix register write order in ksz8_ind_write8()

  Misc:

   - selftests: mptcp: fixes for diag.sh"

* tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
  net: pds_core: Fix possible double free in error handling path
  netrom: Fix data-races around sysctl_net_busy_read
  netrom: Fix a data-race around sysctl_netrom_link_fails_count
  netrom: Fix a data-race around sysctl_netrom_routing_control
  netrom: Fix a data-race around sysctl_netrom_transport_no_activity_timeout
  netrom: Fix a data-race around sysctl_netrom_transport_requested_window_size
  netrom: Fix a data-race around sysctl_netrom_transport_busy_delay
  netrom: Fix a data-race around sysctl_netrom_transport_acknowledge_delay
  netrom: Fix a data-race around sysctl_netrom_transport_maximum_tries
  netrom: Fix a data-race around sysctl_netrom_transport_timeout
  netrom: Fix data-races around sysctl_netrom_network_ttl_initialiser
  netrom: Fix a data-race around sysctl_netrom_obsolescence_count_initialiser
  netrom: Fix a data-race around sysctl_netrom_default_path_quality
  netfilter: nf_conntrack_h323: Add protection for bmp length out of range
  netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
  netfilter: nft_ct: fix l3num expectations with inet pseudo family
  netfilter: nf_tables: reject constant set with timeout
  netfilter: nf_tables: disallow anonymous set with timeout flag
  net/rds: fix WARNING in rds_conn_connect_if_down
  net: dsa: microchip: fix register write order in ksz8_ind_write8()
  ...

Merge branch 'tcp-add-two-missing-addresses-when-using-trace'

Jason Xing says:

====================
tcp: add two missing addresses when using trace

When I reviewed other people's patch [1], I noticed that similar things
also happen in tcp_event_skb class and tcp_event_sk_skb class. They
don't print those two addrs of skb/sk which already exist.

In this patch, I just do as other trace functions do, like
trace_net_dev_start_xmit(), to know the exact flow or skb we would like
to know in case some systems doesn't support BPF programs well or we
have to use /sys/kernel/debug/tracing only for some reasons.

[1]
Link: https://lore.kernel.org/netdev/CAL+tcoAhvFhXdr1WQU8mv_6ZX5nOoNpbOLAB6=C+DB-qXQ11Ew@mail.gmail.com/
v2
Link: https://lore.kernel.org/netdev/CANn89iJcScraKAUk1GzZFoOO20RtC9iXpiJ4LSOWT5RUAC_QQA@mail.gmail.com/
1. change the description.
====================

Link: https://lore.kernel.org/r/20240304092934.76698-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

tcp: add tracing of skbaddr in tcp_event_skb class

Use the existing parameter and print the address of skbaddr
as other trace functions do.

Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

tcp: add tracing of skb/skaddr in tcp_event_sk_skb class

Printing the addresses can help us identify the exact skb/sk
for those system in which it's not that easy to run BPF program.
As we can see, it already fetches those, then use it directly
and it will print like below:

...tcp_retransmit_skb: skbaddr=XXX skaddr=XXX family=AF_INET...

Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'doc-sfp-phylink-update-the-porting-guide'

Maxime Chevallier says:

====================
doc: sfp-phylink: update the porting guide

Here's a V3 for an update on the phylink porting guide. The only
difference with V2 is a whitespace fix along with a line-wrap.

The main point of the update is the description of a basic process to
follow to expose one or more PCS to phylink. Let me know if you spot any
inaccuracies in the guide.

The second patch is a simple fixup on some in-code doc that was spotted
while updating the guide.

Link to V2: https://lore.kernel.org/netdev/20240228095755.1499577-1-maxime.chevallier@bootlin.com/
Link to V1: https://lore.kernel.org/netdev/20240220160406.3363002-1-maxime.chevallier@bootlin.com/
====================

Link: https://lore.kernel.org/r/20240301164309.3643849-1-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: phylink: clean the pcs_get_state documentation

commit 4d72c3bb60dd ("net: phylink: strip out pre-March 2020 legacy code")
dropped the mac_pcs_get_state ops in phylink_mac_ops in favor of
dedicated PCS operation pcs_get_state. However, the documentation for
the pcs_get_state ops was incorrectly converted and now self-references.

Drop the extra comment.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

doc: sfp-phylink: update the porting guide with PCS handling

Now that phylink has a comprehensive PCS support, update the porting
guide to explain the process of supporting the PCS configuration. This
also removed outdated references to phylink_config fields that no longer
exists.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: pds_core: Fix possible double free in error handling path

When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), Callback function pdsc_auxbus_dev_release
calls kfree(padev) to free memory. We shouldn't call kfree(padev)
again in the error handling path.

Fix this by cleaning up the redundant kfree() and putting
the error handling back to where the errors happened.

Fixes: 4569cce43bc6 ("pds_core: add auxiliary_bus devices")
Signed-off-by: Yongzhi Liu <hyperlyzcs@gmail.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240306105714.20597-1-hyperlyzcs@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'nf-24-03-07' of git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains fixes for net:

Patch #1 disallows anonymous sets with timeout, except for dynamic sets.
         Anonymous sets with timeouts using the pipapo set backend makes
         no sense from userspace perspective.

Patch #2 rejects constant sets with timeout which has no practical usecase.
         This kind of set, once bound, contains elements that expire but
         no new elements can be added.

Patch #3 restores custom conntrack expectations with NFPROTO_INET,
         from Florian Westphal.

Patch #4 marks rhashtable anonymous set with timeout as dead from the
         commit path to avoid that async GC collects these elements. Rules
         that refers to the anonymous set get released with no mutex held
         from the commit path.

Patch #5 fixes a UBSAN shift overflow in H.323 conntrack helper,
         from Lena Wang.

netfilter pull request 24-03-07

* tag 'nf-24-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_conntrack_h323: Add protection for bmp length out of range
  netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
  netfilter: nft_ct: fix l3num expectations with inet pseudo family
  netfilter: nf_tables: reject constant set with timeout
  netfilter: nf_tables: disallow anonymous set with timeout flag
====================

Link: https://lore.kernel.org/r/20240307021545.149386-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'netrom-fix-all-the-data-races-around-sysctls'

Jason Xing says:

====================
netrom: Fix all the data-races around sysctls

As the title said, in this patchset I fix the data-race issues because
the writer and the reader can manipulate the same value concurrently.
====================

Link: https://lore.kernel.org/r/20240304082046.64977-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netrom: Fix data-races around sysctl_net_busy_read

We need to protect the reader reading the sysctl value because the
value can be changed concurrently.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netrom: Fix a data-race around sysctl_netrom_link_fails_count

We need to protect the reader reading the sysctl value because the
value can be changed concurrently.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netrom: Fix a data-race around sysctl_netrom_routing_control

We need to protect the reader reading the sysctl value because the
value can be changed concurrently.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netrom: Fix a data-race around sysctl_netrom_transport_no_activity_timeout

We need to protect the reader reading the sysctl value because the
value can be changed concurrently.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netrom: Fix a data-race around sysctl_netrom_transport_requested_window_size

We need to protect the reader reading the sysctl value because the
value can be changed concurrently.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netrom: Fix a data-race around sysctl_netrom_transport_busy_delay

We need to protect the reader reading the sysctl value because the
value can be changed concurrently.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netrom: Fix a data-race around sysctl_netrom_transport_acknowledge_delay

We need to protect the reader reading the sysctl value because the
value can be changed concurrently.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netrom: Fix a data-race around sysctl_netrom_transport_maximum_tries

We need to protect the reader reading the sysctl value because the
value can be changed concurrently.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netrom: Fix a data-race around sysctl_netrom_transport_timeout

We need to protect the reader reading the sysctl value because the
value can be changed concurrently.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netrom: Fix data-races around sysctl_netrom_network_ttl_initialiser

We need to protect the reader reading the sysctl value because the
value can be changed concurrently.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netrom: Fix a data-race around sysctl_netrom_obsolescence_count_initialiser

We need to protect the reader reading the sysctl value
because the value can be changed concurrently.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netrom: Fix a data-race around sysctl_netrom_default_path_quality

We need to protect the reader reading sysctl_netrom_default_path_quality
because the value can be changed concurrently.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'ipsec-2024-03-06' of git://git./linux/kernel/git/klassert/ipsec

Steffen Klassert says:

====================
pull request (net): ipsec 2024-03-06

1) Clear the ECN bits flowi4_tos in decode_session4().
   This was already fixed but the bug was reintroduced
   when decode_session4() switched to us the flow dissector.
   From Guillaume Nault.

2) Fix UDP encapsulation in the TX path with packet offload mode.
   From Leon Romanovsky,

3) Avoid clang fortify warning in copy_to_user_tmpl().
   From Nathan Chancellor.

4) Fix inter address family tunnel in packet offload mode.
   From Mike Yu.

* tag 'ipsec-2024-03-06' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
  xfrm: set skb control buffer based on packet offload as well
  xfrm: fix xfrm child route lookup for packet offload
  xfrm: Avoid clang fortify warning in copy_to_user_tmpl()
  xfrm: Pass UDP encapsulation in TX packet offload
  xfrm: Clear low order bits of ->flowi4_tos in decode_session4().
====================

Link: https://lore.kernel.org/r/20240306100438.3953516-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ethtool: remove ethtool_eee_use_linkmodes

After 292fac464b01 ("net: ethtool: eee: Remove legacy _u32 from keee")
this function has no user any longer.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/b4ff9b51-092b-4d44-bfce-c95342a05b51@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxbf_gige: add support to display pause frame counters

This patch updates the mlxbf_gige driver to support the
"get_pause_stats()" callback, which enables display of
pause frame counters via "ethtool -I -a oob_net0".

The pause frame counters are only enabled if the "counters_en"
bit is asserted in the LLU general config register. The driver
will only report stats, and thus overwrite the default stats
state of ETHTOOL_STAT_NOT_SET, if "counters_en" is asserted.

Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20240305212137.3525-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: qca807x: fix compilation when CONFIG_GPIOLIB is not set

Kernel bot has discovered that if CONFIG_GPIOLIB is not set compilation
will fail.

Upon investigation the issue is that qca807x_gpio() is guarded by a
preprocessor check but then it is called under
if (IS_ENABLED(CONFIG_GPIOLIB)) in the probe call so the compiler will
error out since qca807x_gpio() has not been declared if CONFIG_GPIOLIB has
not been set.

Fixes: d1cb613efbd3 ("net: phy: qcom: add support for QCA807x PHY Family")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403031332.IGAbZzwq-lkp@intel.com/
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://lore.kernel.org/r/20240305142113.795005-1-robimarko@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: geneve: Remove generic .ndo_get_stats64

Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.

Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240305172911.502058-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: geneve: Leverage core stats allocator

With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Remove the allocation in the geneve driver and leverage the network
core allocation instead.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240305172911.502058-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: gtp: Move net_device assigned in setup

Assign netdev to gtp->dev at setup time, so, we can get rid of
gtp_dev_init() completely.

Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20240305121524.2254533-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: gtp: Remove generic .ndo_get_stats64

Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.

Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.

Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20240305121524.2254533-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: gtp: Leverage core stats allocator

With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Remove the allocation in the gtp driver and leverage the network
core allocation instead.

Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20240305121524.2254533-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: macsec: Leverage core stats allocator

With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Remove the allocation in the macsec driver and leverage the network
core allocation instead.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20240305113728.1974944-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dt-bindings: net: renesas,etheravb: Add support for R-Car V4M

Document support for the Renesas Ethernet AVB (EtherAVB-IF) block in the
Renesas R-Car V4M (R8A779H0) SoC.

Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/0212b57ba1005bb9b5a922f8f25cc67a7bc15f30.1709631152.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sr9800: Add check for usbnet_get_endpoints

Add check for usbnet_get_endpoints() and return the error if it fails
in order to transfer the error.

Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 19a38d8e0aa3 ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support")
Link: https://lore.kernel.org/r/20240305075927.261284-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/harness: Fix TEST_F()'s vfork handling

Always run fixture setup in the grandchild process, and by default also
run the teardown in the same process.  However, this change makes it
possible to run the teardown in a parent process when
_metadata->teardown_parent is set to true (e.g. in fixture setup).

Fix TEST_SIGNAL() by forwarding grandchild's signal to its parent.  Fix
seccomp tests by running the test setup in the parent of the test
thread, as expected by the related test code.  Fix Landlock tests by
waiting for the grandchild before processing _metadata.

Use of exit(3) in tests should be OK because the environment in which
the vfork(2) call happen is already dedicated to the running test (with
flushed stdio, setpgrp() call), see __run_test() and the call to fork(2)
just before running the setup/test/teardown.  Even if the test
configures its own exit handlers, they will not be run by the parent
because it never calls exit(3), and the test function either ends with a
call to _exit(2) or a signal.

Cc: Günther Noack <gnoack@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Fixes: 0710a1a73fb4 ("selftests/harness: Merge TEST_F_FORK() into TEST_F()")
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240305201029.1331333-1-mic@digikod.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mptcp-some-clean-up-patches'

Matthieu Baerts says:

====================
mptcp: some clean-up patches

Here are some clean-up patches for MPTCP:

- Patch 1 drops duplicated header inclusions.

- Patch 2 updates PM 'set_flags' interface, to make it more similar to
  others.

- Patch 3 adds some error messages for the PM 'set_flags' command to
  help the userspace understanding what's wrong in case of error.

- Patch 4 simplifies __lookup_addr() function from pm_netlink.c.

Except for the 3rd patch, the behaviour is not supposed to be modified.
====================

Link: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-mptcp-misc-cleanup-v1-0-c436ba5e569b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: drop lookup_by_id in lookup_addr

When the lookup_by_id parameter of __lookup_addr() is true, it's the same
as __lookup_addr_by_id(), it can be replaced by __lookup_addr_by_id()
directly. So drop this parameter, let __lookup_addr() only looks up address
on the local address list by comparing addresses in it, not address ids.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-mptcp-misc-cleanup-v1-4-c436ba5e569b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: set error messages for set_flags

In addition to returning the error value, this patch also sets an error
messages with GENL_SET_ERR_MSG or NL_SET_ERR_MSG_ATTR both for pm_netlink.c
and pm_userspace.c. It will help the userspace to identify the issue.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-mptcp-misc-cleanup-v1-3-c436ba5e569b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: update set_flags interfaces

This patch updates set_flags interfaces, make it more similar to the
interfaces of dump_addr and get_addr:

 mptcp_pm_set_flags(struct sk_buff *skb, struct genl_info *info)
 mptcp_pm_nl_set_flags(struct sk_buff *skb, struct genl_info *info)
 mptcp_userspace_pm_set_flags(struct sk_buff *skb, struct genl_info *info)

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-mptcp-misc-cleanup-v1-2-c436ba5e569b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>