Günther Deschner [Thu, 18 Feb 2010 00:45:06 +0000 (01:45 +0100)]
s4-smbtorture: skip printer info cross tests against samba 3 for now.
Not even w2k8r2 passes them atm.
Guenther
Günther Deschner [Thu, 18 Feb 2010 00:43:08 +0000 (01:43 +0100)]
s4-smbtorture: try more combinations to find printers in test_EnumPrinters_findname().
Also take a note of servers returning full UNC printer paths although we did not
set the servername.
Guenther
Günther Deschner [Thu, 18 Feb 2010 00:41:46 +0000 (01:41 +0100)]
s4-smbtorture: simplify test_PrinterInfo_DevMode a bit.
Guenther
Günther Deschner [Wed, 17 Feb 2010 19:45:26 +0000 (20:45 +0100)]
s4-smbtorture: avoid potential loop while adding a new printer in RPC-SPOOLSS-PRINTER.
Guenther
Günther Deschner [Wed, 17 Feb 2010 14:15:47 +0000 (15:15 +0100)]
s3-rpcclient: fix uninitialized variable in wkssvc_enumerateusers.
Guenther
Jeremy Allison [Thu, 18 Feb 2010 00:40:28 +0000 (16:40 -0800)]
Got back to 16-byte padding on auth RPC. S3 clients and servers now cope with this. Jeremy
Andrew Bartlett [Wed, 17 Feb 2010 23:54:53 +0000 (10:54 +1100)]
s4:param Modify secrets_get_domain_sid to give more useful errors
This also moves the calls to secrets_get_domain_sid back into
winbind_task_init(), so that we can terminate with a much more
detailed error message. (The previous message was simply
NT_STATUS_CANT_ACCESS_DOMAIN_INFO).
Andrew Bartlett
Jeremy Allison [Wed, 17 Feb 2010 23:27:59 +0000 (15:27 -0800)]
Fix bug #7146 - Samba miss-parses authenticated RPC packets.
Parts of the Samba RPC client and server code misinterpret authenticated
packets.
DCE authenticated packets actually look like this :
+--------------------------+
|header |
| ... frag_len (packet len)|
| ... auth_len |
+--------------------------+
| |
| Data payload |
... ....
| |
+--------------------------+
| |
| auth_pad_len bytes |
+--------------------------+
| |
| Auth footer |
| auth_pad_len value |
+--------------------------+
| |
| Auth payload |
| (auth_len bytes long) |
+--------------------------+
That's right. The pad bytes come *before* the footer specifying how many pad
bytes there are. In order to read this you must seek to the end of the packet
and subtract the auth_len (in the packet header) and the auth footer length (a
known value).
The client and server code gets this right (mostly) in 3.0.x -> 3.4.x so long
as the pad alignment is on an 8 byte boundary (there are some special cases in
the code for this).
Tridge discovered there are some (DRS replication) cases where on 64-bit
machines where the pad alignment is on a 16-byte boundary. This breaks the
existing S3 hand-optimized rpc code.
This patch removes all the special cases in client and server code, and allows
the pad alignment for generated packets to be specified by changing a constant
in include/local.h (this doesn't affect received packets, the new code always
handles them correctly whatever pad alignment is used).
This patch also works correctly with rpcclient using sign+seal from
the 3.4.x and 3.3.x builds (testing with 3.0.x and 3.2.x to follow)
so even as a server it should still work with older libsmbclient and
winbindd code.
Jeremy
Jeremy Allison [Wed, 17 Feb 2010 19:13:35 +0000 (11:13 -0800)]
Fix bug #6557 - Do not work VFS full_audit
Re-arrange the operations order so SMB_VFS_CONNECT is done
first as root (to allow modules to correctly initialize themselves).
Reviewed modules to check if they needed CONNECT invoked as
a user (which we previously did) and it turns out any of them
that cared needed root permissions anyway.
Jeremy.
Lars Müller [Wed, 17 Feb 2010 18:00:01 +0000 (19:00 +0100)]
s3: go straight to winbindd_dual_pam_auth() in case of !NT_STATUS_OK
At the formerly used process_result statement we have alone one
NT_STATUS_IS_OK() which never could be hit in our case as we only go here
if NT_STATUS_EQUAL is not ok.
Lars Müller [Fri, 5 Feb 2010 21:47:39 +0000 (22:47 +0100)]
s3: let the pam_winbind po files reference the correct location
Jeremy Allison [Wed, 17 Feb 2010 17:24:34 +0000 (09:24 -0800)]
Fix commit
d07cd37b993d3c9beded20323174633b806196b5
Which was:
tsocket/bsd: fix bug #7115 FreeBSD includes the UDP header in FIONREAD
Metze, this has to have been wrong - you are throwing away the talloc_realloc
pointer returned. Also no error checking. Please review.
Thank goodness for gcc warnings :-).
Jeremy.
Anatoliy Atanasov [Wed, 17 Feb 2010 16:01:31 +0000 (18:01 +0200)]
s4/rodc: change the libnet_become_dc code to do RODC join
Anatoliy Atanasov [Wed, 17 Feb 2010 16:00:41 +0000 (18:00 +0200)]
s4/drs: add DRSUAPI_ATTRIBUTE_options attribute
Anatoliy Atanasov [Tue, 16 Feb 2010 23:21:28 +0000 (01:21 +0200)]
s4/drs:kccdrs_replica_get_info_obj_metadata implementation
Fix the names of the drsuapi_DsReplicaInfoType enum and rebuild the .idl
The get_info_obj_metadata implementation is ported from implementation
i developed and tested at the samba io lab 2009
Kamen Mazdrashki [Fri, 29 Jan 2010 17:05:51 +0000 (19:05 +0200)]
s4/ldap: Refactor the fix for ldap nested searches
Current implementation synchronizes processing for
all types of LDAP request, not only LDAP_Search ones.
Synchronization for ldap replies processing is done
locally in ldb_ildap module as this concerns only
ildb_callback() function.
Signed-off-by: Anatoliy Atanasov <anatoliy.atanasov@postpath.com>
Stefan Metzmacher [Wed, 17 Feb 2010 12:53:02 +0000 (13:53 +0100)]
tsocket/bsd: fix bug #7115 FreeBSD includes the UDP header in FIONREAD
metze
Stefan Metzmacher [Wed, 17 Feb 2010 08:33:18 +0000 (09:33 +0100)]
tsocket/bsd: set IPV6_V6ONLY on AF_INET6 sockets
Some system already have this as default. It's easier
to behave the same way on all systems and handle ipv6
and ipv4 sockets separate.
metze
Stefan Metzmacher [Wed, 17 Feb 2010 07:49:28 +0000 (08:49 +0100)]
tsocket/bsd: fix bug #7140 autodetect ipv4 and ipv6 based on the remote address if the local address is any
metze
Stefan Metzmacher [Wed, 17 Feb 2010 07:45:58 +0000 (08:45 +0100)]
tsocket/bsd: fix bug #7140 use calculated sa_socklen for bind() in tstream_bsd_connect_send()
This is needed because, we can't use sizeof(sockaddr_storage) for AF_UNIX
sockets. Also some platforms require exact values for AF_INET and AF_INET6.
metze
Stefan Metzmacher [Wed, 17 Feb 2010 07:42:22 +0000 (08:42 +0100)]
tsocket/bsd: fix do_bind logic for AF_INET
We want the explicit bind() when we don't use the any address.
metze
Stefan Metzmacher [Wed, 17 Feb 2010 08:43:00 +0000 (09:43 +0100)]
socket_wrapper: also ignore AF_INET6 in swrap_setsockopt()
metze
Jeff Layton [Tue, 16 Feb 2010 14:16:42 +0000 (09:16 -0500)]
cifs.upcall: allocate a talloc context for smb_krb5_unparse_name
cifs.upcall calls smb_krb5_unparse_name with a NULL talloc context.
Older versions of this function though will conditionally use
SMB_REALLOC instead of TALLOC_REALLOC when a NULL context is passed
in. To make it more consistent, just spawn a talloc context that
we can pass into this function.
Resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=565446
https://bugzilla.samba.org/show_bug.cgi?id=6868
Reported-by: Ludek Finstrle <luf@seznam.cz>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Günther Deschner <gd@samba.org>
Volker Lendecke [Tue, 16 Feb 2010 22:29:48 +0000 (23:29 +0100)]
s3: Fix bug 7139
To provide the user with the same SID when doing Kerberos logins, attempt to do
a make_server_info_sam instead of a make_server_info_pw.
Günther Deschner [Wed, 17 Feb 2010 10:21:56 +0000 (11:21 +0100)]
s4-smbtorture: unify test list to run against single created printers in RPC-SPOOLSS-PRINTER.
This is to make sure we run the same tests for printers created via AddPrinter
and via AddPrinterEx.
Guenther
Günther Deschner [Tue, 16 Feb 2010 16:42:58 +0000 (17:42 +0100)]
s4-smbtorture: also test level 2 sets for devicemodes and see if they persist.
Guenther
Günther Deschner [Tue, 16 Feb 2010 16:42:19 +0000 (17:42 +0100)]
s4-smbtorture: refactor setprinter devicemode calls in RPC-SPOOLSS-PRINTER.
Guenther
Andrew Tridgell [Wed, 17 Feb 2010 08:43:26 +0000 (19:43 +1100)]
s4-provision: freeze the DNS zone before creating the zone file
This prevents bind from getting confused if it has a journal for the
zone.
Andrew Tridgell [Wed, 17 Feb 2010 08:29:37 +0000 (19:29 +1100)]
s4-dnsupdate: use samba_runcmd() in the dns update task
Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
Andrew Tridgell [Wed, 17 Feb 2010 07:18:28 +0000 (18:18 +1100)]
s4-param: added "rndc command" smb.conf option
Andrew Tridgell [Wed, 17 Feb 2010 07:18:05 +0000 (18:18 +1100)]
util: added samba_runcmd()
This allows us to run a child command in an async fashion, with
control over logging of stdout and stderr (which appears in the Samba
log file). This is useful for ensuring we don't miss important
messages from rndc commands (for example).
Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
Andrew Tridgell [Wed, 17 Feb 2010 05:34:33 +0000 (16:34 +1100)]
examples: add bind9 patches for TSIG-GSS support
We will point at these from the Samba4 HOWTO
Andrew Tridgell [Wed, 17 Feb 2010 05:29:17 +0000 (16:29 +1100)]
s4-provision: fix permissions on generated DNS zone file
The zone file needs to be writeable by bind to allow for it to flush
its journal on dynamic updates
Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
Simo Sorce [Sun, 14 Feb 2010 08:33:15 +0000 (03:33 -0500)]
s3:rpc streamline memory handling
Andrew Tridgell [Tue, 16 Feb 2010 23:23:14 +0000 (10:23 +1100)]
s4-rpc: paranoid check for auth_length
This is not strictly needed as the ndr_pull_advance() checks it a few
lines further down, but I want to save Jeremy getting more grey hairs :-)
Günther Deschner [Tue, 16 Feb 2010 15:12:52 +0000 (16:12 +0100)]
testprogs: add rather simple device mode tests to spoolss test.
Guenther
Volker Lendecke [Tue, 16 Feb 2010 14:21:25 +0000 (15:21 +0100)]
s3: Fix timeout calculation if g_lock_lock is given a timeout < 60s
Detected while showing this code to obnox :-)
Volker Lendecke [Tue, 16 Feb 2010 11:31:58 +0000 (12:31 +0100)]
s3: Slightly increase parallelism in g_lock
There's no need to still hold the g_lock tdb-level lock while telling the
waiters to retry
Volker Lendecke [Tue, 16 Feb 2010 11:28:53 +0000 (12:28 +0100)]
s3: Avoid starving locks when many processes die at the same time
In g_lock_unlock we have a little race between the process_exists and
messaging_send call: We only send to 5 waiters now, they all might have died
between us checking their existence and sending the message. This change makes
g_lock_lock retry at least once every minute.
Volker Lendecke [Tue, 16 Feb 2010 11:22:08 +0000 (12:22 +0100)]
s3: Avoid a thundering herd in g_lock_unlock
Only notify the first 5 pending lock waiters. This avoids a thundering herd
problem that is really nasty in a cluster. It also makes acquiring a lock a bit
more FIFO, lock waiters are added to the end of the array.
Volker Lendecke [Mon, 15 Feb 2010 15:57:16 +0000 (16:57 +0100)]
s3: Optimize g_lock_lock for a heavily contended case
Only check the existence of the lock owner in g_lock_parse, check the rest of
the records only when we got the lock successfully. This reduces the load on
process_exists which can involve a network roundtrip in the clustered case.
Volker Lendecke [Mon, 15 Feb 2010 15:49:46 +0000 (16:49 +0100)]
s3: Fix handling of processes that died in g_lock
g_lock_parse might have thrown away entries from the locks array because the
processes were not around anymore. Don't store the orphaned entries.
Andrew Tridgell [Tue, 16 Feb 2010 11:41:45 +0000 (22:41 +1100)]
s4-kcc: remove a qsort() that snuck into the new topology code
Andrew Tridgell [Tue, 16 Feb 2010 11:18:16 +0000 (22:18 +1100)]
s4-rpc: don't use auth padding in rpc bind requests as it breaks s3
The s3 RPC server returns a bind_nak if it gets a rpc bind with auth
padding. This change forces a padding length of zero to maximimise
compatibility with s3 servers.
I've left the padding code in as a #if 0 to make it easier for us to
test/fix the s3 server code, which should be changed to correctly
handle arbitrary auth padding in all rpc requests with auth trailers.
Andrew Tridgell [Tue, 16 Feb 2010 09:21:29 +0000 (20:21 +1100)]
s4-dcerpc: fixed auth padding to be relative to the stub, not packet
The recent dcerpc padding changes made our padding relative to the
packet header, instead of the start of the stub. Surprisingly, this
broke w2k8r2 doing a dcpromo join to a s4 server. It seems that w2k8r2
is very fussy about the padding it gets in some circumstances.
Andrew Tridgell [Tue, 16 Feb 2010 05:39:49 +0000 (16:39 +1100)]
s4-dsdb: return LDB_ERR_CONSTRAINT_VIOLATION on num_recs != 1
In a single record search, LDB_ERR_CONSTRAINT_VIOLATION is more useful
than the generic LDB_ERR_OPERATIONS_ERROR
Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
Andrew Tridgell [Tue, 16 Feb 2010 05:09:07 +0000 (16:09 +1100)]
s4-samdb: use dsdb_search() in cracknames
greatly simplifies some of the cracknames code
Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
Andrew Tridgell [Tue, 16 Feb 2010 04:54:01 +0000 (15:54 +1100)]
s4-kcc: remove search_onelevel_with_deleted() in kcc
Use dsdb_search() instead
Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
Andrew Tridgell [Tue, 16 Feb 2010 04:49:29 +0000 (15:49 +1100)]
s4-dsdb: removed gendb_search_single_extended_dn()
Use dsdb_search_one() instead, which allows for arbitrary controls
Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
Andrew Tridgell [Tue, 16 Feb 2010 04:40:44 +0000 (15:40 +1100)]
s4-dsdb: added dsdb_search_one() and cleanup dsdb_find_dn_by_guid()
dsdb_find_dn_by_guid() now takes a struct GUID instead of a
guid_string. All the callers in fact wanted a struct GUID, so we now
avoid the extra conversion.
Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
Andrew Tridgell [Tue, 16 Feb 2010 04:15:35 +0000 (15:15 +1100)]
s4-dsdb: replace dsdb_find_dn_by_guid() with a dsdb_search() call
much simpler code by using dsdb_flags
Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
Andrew Tridgell [Tue, 16 Feb 2010 03:55:19 +0000 (14:55 +1100)]
s4-dsdb: change dsdb_search_dn_with_deleted() to dsdb_search_dn() with dsdb_flags
Allows for arbitrary controls
Andrew Tridgell [Tue, 16 Feb 2010 03:45:16 +0000 (14:45 +1100)]
s4-dsdb: change samdb_replace() to dsdb_replace() and allow for dsdb_flags
This allows for controls to be added easily where they are needed.
Andrew Tridgell [Tue, 16 Feb 2010 03:29:07 +0000 (14:29 +1100)]
s4-dsdb: replace dsdb_modify_permissive() with dsdb_modify() and dsdb_flags
Andrew Tridgell [Tue, 16 Feb 2010 03:23:21 +0000 (14:23 +1100)]
s4-dsdb: move dsdb_request_add_controls() into dsdb/common/util.c
This will be used to allow the flag based ldb functions to work on
both a ldb or a module, thus saving a lot of specialist functions.
Volker Lendecke [Tue, 16 Feb 2010 10:00:08 +0000 (11:00 +0100)]
s3-docs: Document 'smbclient -C'.
Günther Deschner [Tue, 16 Feb 2010 09:45:29 +0000 (10:45 +0100)]
s4-smbtorture: fix spoolss SD test against w2k8r2.
Guenther
Günther Deschner [Tue, 16 Feb 2010 02:28:43 +0000 (03:28 +0100)]
s4-smbtorture: more work on test_PrinterInfo_DevMode RPC-SPOOLSS-PRINTER.
Guenther
Günther Deschner [Tue, 16 Feb 2010 02:26:10 +0000 (03:26 +0100)]
s4-smbtorture: allow to call OpenPrinterEx with devicemode.
Guenther
Günther Deschner [Mon, 15 Feb 2010 22:03:48 +0000 (23:03 +0100)]
testprogs: add "samba3" and "architecture=" options to spoolss tester.
Guenther
Erick Nogueira do Nascimento [Thu, 11 Feb 2010 21:04:00 +0000 (19:04 -0200)]
s4-drs: DsGetReplInfo() refactoring
Erick Nogueira do Nascimento [Fri, 29 Jan 2010 22:07:47 +0000 (20:07 -0200)]
s4-drs: DsReplGetInfo() for DS_REPL_INFO_REPSTO infoType
Implements the DS_REPL_INFO_REPSTO infoType of DsReplGetInfo().
Günther Deschner [Mon, 15 Feb 2010 21:06:42 +0000 (22:06 +0100)]
s4-smbtorture: more work on SD tests for RPC-SPOOLSS.
Guenther
Günther Deschner [Mon, 15 Feb 2010 21:16:25 +0000 (22:16 +0100)]
s4-smbtorture: add rather simple spoolss device mode test.
Guenther
Günther Deschner [Mon, 15 Feb 2010 20:55:06 +0000 (21:55 +0100)]
s4-smbtorture: use test_SetPrinter call in spoolss security descriptor tests.
Guenther
Günther Deschner [Mon, 15 Feb 2010 18:23:35 +0000 (19:23 +0100)]
s4-smbtorture: w2k8r2 allows to add printers w/o defining printprocessor.
Guenther
Günther Deschner [Mon, 15 Feb 2010 20:45:59 +0000 (21:45 +0100)]
testprogs: fix EnumJobs debug output in spoolss test.
Found by Kai, thanks!
Guenther
Volker Lendecke [Mon, 15 Feb 2010 15:35:06 +0000 (16:35 +0100)]
s3: Fix a typo
Andrew Tridgell [Mon, 15 Feb 2010 12:49:26 +0000 (23:49 +1100)]
s4-rootdse: we don't need DSDB_FLAG_OWN_MODULE here
Eduardo Lima [Fri, 12 Feb 2010 16:18:27 +0000 (14:18 -0200)]
s4-drs: enable the recyclebin optional feature
Signed-off-by: Andrew Tridgell <tridge@samba.org>
Andrew Tridgell [Mon, 15 Feb 2010 12:05:33 +0000 (23:05 +1100)]
s4-kcc: remove C++ comment
Crístian Deives [Wed, 10 Feb 2010 05:42:28 +0000 (03:42 -0200)]
s4-kcc: initial code for the topology algorithm
this patch contains the data structures declarations and the functions to
setup the graph.
Signed-off-by: Andrew Tridgell <tridge@samba.org>
Andrew Tridgell [Mon, 15 Feb 2010 11:49:35 +0000 (22:49 +1100)]
s4-dsdb: don't change replPropertyMetaData if the value hasn't changed
When updating replPropertyMetaData, check if the value being stored is
the same as the current value, and skip the update if it is.
This is based on a patch by Fernando J V da Silva <fernandojvsilva@yahoo.com.br>
Karolin Seeger [Mon, 15 Feb 2010 11:23:11 +0000 (12:23 +0100)]
s4-heimdal: Fix typos in comment.
Karolin
Andrew Tridgell [Mon, 15 Feb 2010 10:21:55 +0000 (21:21 +1100)]
s4-test: use local ldb for urgent_replication test
This test only currently works on a local ldb, as it needs system
access.
Andrew Tridgell [Mon, 15 Feb 2010 10:18:13 +0000 (21:18 +1100)]
s4-ldb: fixed permissions on urgent_replication.py
Andrew Tridgell [Mon, 15 Feb 2010 10:14:42 +0000 (21:14 +1100)]
s4-test: minor fixes to urgent_replication.py
- fix usage name
- remove unnecessary python functions
- remote unused gc ldb
Fernando J V da Silva [Thu, 4 Feb 2010 19:03:41 +0000 (17:03 -0200)]
s4-drs: Test situations for Urgent Replication
Checks if the partition's uSNUrgent is updated or not, depending
on the class of the object which is created, modified or deleted.
Signed-off-by: Andrew Tridgell <tridge@samba.org>
Fernando J V da Silva [Thu, 4 Feb 2010 18:58:31 +0000 (16:58 -0200)]
s4-drs: Function for accessing dsdb_load_partition_usn from Python
Returns both uSNHighest and uSNUrgent as a dict object in Python
from a given partition dn.
Signed-off-by: Andrew Tridgell <tridge@samba.org>
Fernando J V da Silva [Thu, 4 Feb 2010 18:46:52 +0000 (16:46 -0200)]
s4-drs: Fixes bugs regarding Urgent Replication on wrong situations
It fixes the bug which causes an urgent replication to be enabled
incorrectly when an object is modified, but it should happen only
when it was created. This patch also fixes the bug that enable an
urgent replication when an object is deleted, but it should happen
only when it was modified and fixes the bug that does not enable
an urgent replication when an object is deleted and it should happen
only when it is deleted (not when it is modified).
Signed-off-by: Andrew Tridgell <tridge@samba.org>
Günther Deschner [Thu, 11 Feb 2010 11:54:57 +0000 (12:54 +0100)]
spoolss: disable GetPrinterDriver level 101 (as called by XP).
We still dont get the marshalling right, disable and XP will just fall back to
level 6.
Guenther
Günther Deschner [Sat, 13 Feb 2010 01:11:31 +0000 (02:11 +0100)]
s4-smbtorture: add some security descriptor tests to RPC-SPOOLSS and RPC-SPOOLSS-PRINTER.
Guenther
Matthias Dieter Wallnöfer [Mon, 15 Feb 2010 09:29:47 +0000 (10:29 +0100)]
s4:provision.c - "provsion_store_self_join" - don't set the realm if it's NULL
The realm can be NULL when this function is called by "libnet_Join_primary_domain".
This seems to be a valid value since "libnet_JoinDomain" is allowed to return an
empty realm if we are not in a ADS domain.
Andrew Tridgell [Mon, 15 Feb 2010 06:39:20 +0000 (17:39 +1100)]
s4-drs: replace manual checks with dsdb_modify_permissive()
Much simpler to use the permissive control instead of manually munging
the SPN list.
Andrew Tridgell [Mon, 15 Feb 2010 06:38:47 +0000 (17:38 +1100)]
s4-drs: use a permissive modify in addentry
It is not an error if entries already exist.
Andrew Tridgell [Mon, 15 Feb 2010 06:38:16 +0000 (17:38 +1100)]
s4-dsdb: added dsdb_modify_permissive()
This will be used in the drsuapi server
Holger Hetterich [Sun, 14 Feb 2010 18:05:00 +0000 (19:05 +0100)]
s3: eventlogadm.c: add -s option to use alternative config file.
Update the manpage accordingly.
Peter Watkins [Sun, 14 Feb 2010 11:43:13 +0000 (12:43 +0100)]
s3: Fix initgroups return check
A return code of 1 from initgroups() is OK since apparently it means
the gid has already been set. The man page doesn't mention this.
Matthias Dieter Wallnöfer [Sun, 14 Feb 2010 09:48:13 +0000 (10:48 +0100)]
s4:dcesrv_lsa.c - remove a superfluous empty line
One empty line is enough for code part divisions.
Andrew Tridgell [Sun, 14 Feb 2010 06:09:55 +0000 (17:09 +1100)]
s4-rpcserver: teach the rpc server to cope with bad sig_size estimates
Andrew Tridgell [Sun, 14 Feb 2010 00:56:28 +0000 (11:56 +1100)]
a4-dcerpc: another attempt at dcerpc auth padding
The last change broke net vampire against w2k8r2
Andrew Tridgell [Sat, 6 Feb 2010 01:25:06 +0000 (12:25 +1100)]
util: update three other copies of our dlinklist.h macros
ldb and tevent have their own copies of these macros. This brings them
in sync with the master copy of dlinklist.h
Andrew Tridgell [Sat, 13 Feb 2010 23:03:55 +0000 (10:03 +1100)]
s3: last part of TYPESAFE_QSORT() conversion
convert smbcacls, sharesec and web/
Andrew Tridgell [Sat, 13 Feb 2010 23:03:12 +0000 (10:03 +1100)]
s3-smbd: convert lanman and notify code to TYPESAFE_QSORT()
Andrew Tridgell [Sat, 13 Feb 2010 23:02:54 +0000 (10:02 +1100)]
s3-rpc: convert wkssvc to use TYPESAFE_QSORT()
Andrew Tridgell [Sat, 13 Feb 2010 23:02:35 +0000 (10:02 +1100)]
s3-locking: convert brlock to TYPESAFE_QSORT()
Andrew Tridgell [Sat, 13 Feb 2010 23:02:19 +0000 (10:02 +1100)]
s3: convert registry and printing code to TYPESAFE_QSORT()
Andrew Tridgell [Sat, 13 Feb 2010 23:01:49 +0000 (10:01 +1100)]
s3-nmbd: note TODO item for qsort
This uses another char* cast hack. Left alone for now.
Andrew Tridgell [Sat, 13 Feb 2010 23:01:17 +0000 (10:01 +1100)]
s3-vfs: use TYPESAFE_QSORT() in s3 VFS modules
Andrew Tridgell [Sat, 13 Feb 2010 23:00:49 +0000 (10:00 +1100)]
s3-lib: use TYPESAFE_QSORT() in remaining s3 library code
the sort_query_replies() in nmblib.c is a TODO. It uses a hack that
treats a char* as a structure. I've left that one alone for now.