/*) : ;;
*) EVENTSCRIPTS_PATH="${PWD}/${EVENTSCRIPTS_PATH}" ;;
esac
+ export CTDB_HELPER_BINDIR="$EVENTSCRIPTS_PATH"
fi
export EVENTSCRIPTS_PATH
PATH="${EVENTSCRIPTS_PATH}:${PATH}"
+export CTDB="ctdb"
+
export EVENTSCRIPTS_TESTS_VAR_DIR="${TEST_VAR_DIR}/unit_eventscripts"
if [ -d "$EVENTSCRIPTS_TESTS_VAR_DIR" -a \
"$EVENTSCRIPTS_TESTS_VAR_DIR" != "/unit_eventscripts" ] ; then
rm -r "$EVENTSCRIPTS_TESTS_VAR_DIR"
fi
mkdir -p "$EVENTSCRIPTS_TESTS_VAR_DIR"
-export CTDB_VARDIR="$EVENTSCRIPTS_TESTS_VAR_DIR/ctdb"
+export CTDB_SCRIPT_VARDIR="$EVENTSCRIPTS_TESTS_VAR_DIR/script-state"
export CTDB_LOGGING="file:${EVENTSCRIPTS_TESTS_VAR_DIR}/log.ctdb"
touch "${CTDB_LOGGING#file:}" || \
die "Unable to setup logging for \"$CTDB_LOGGING\""
-if [ -d "${TEST_SUBDIR}/etc" ] ; then
+if [ -d "${TEST_SUBDIR}/etc" ] ; then
cp -a "${TEST_SUBDIR}/etc" "$EVENTSCRIPTS_TESTS_VAR_DIR"
- export CTDB_ETCDIR="${EVENTSCRIPTS_TESTS_VAR_DIR}/etc"
+ export CTDB_SYS_ETCDIR="${EVENTSCRIPTS_TESTS_VAR_DIR}/etc"
else
- die "Unable to setup \$CTDB_ETCDIR"
+ die "Unable to setup \$CTDB_SYS_ETCDIR"
fi
if [ -d "${TEST_SUBDIR}/etc-ctdb" ] ; then
debug () { : ; }
fi
-eventscripts_tests_cleanup_hooks=""
-
-# This loses quoting!
-eventscripts_test_add_cleanup ()
-{
- eventscripts_tests_cleanup_hooks="${eventscripts_tests_cleanup_hooks}${eventscripts_tests_cleanup_hooks:+ ; }$*"
-}
-
-trap 'eval $eventscripts_tests_cleanup_hooks' 0
-
-
######################################################################
# General setup fakery
export CTDB_DBDIR="${EVENTSCRIPTS_TESTS_VAR_DIR}/db"
- mkdir -p "${CTDB_DBDIR}/persistent"
+ export CTDB_DBDIR_PERSISTENT="${CTDB_DBDIR}/persistent"
+ export CTDB_DBDIR_STATE="${CTDB_DBDIR}/state"
+ mkdir -p "$CTDB_DBDIR_PERSISTENT"
+ mkdir -p "$CTDB_DBDIR_STATE"
export FAKE_TDBTOOL_SUPPORTS_CHECK="yes"
export FAKE_TDB_IS_OK
)
}
-# Set output for ctdb command. Option 1st argument is return code.
-ctdb_set_output ()
-{
- _out="$EVENTSCRIPTS_TESTS_VAR_DIR/ctdb.out"
- cat >"$_out"
-
- _rc="$EVENTSCRIPTS_TESTS_VAR_DIR/ctdb.rc"
- echo "${1:-0}" >"$_rc"
-
- eventscripts_test_add_cleanup "rm -f $_out $_rc"
-}
-
# For now this creates the same public addresses each time. However,
# it could be made more flexible.
setup_public_addresses ()
export FAKE_CTDB_PNN="$1"
echo "Setting up PNN ${FAKE_CTDB_PNN}"
- export CTDB_VARDIR="$EVENTSCRIPTS_TESTS_VAR_DIR/ctdb/${FAKE_CTDB_PNN}"
- mkdir -p "$CTDB_VARDIR"
+ export CTDB_SCRIPT_VARDIR="$EVENTSCRIPTS_TESTS_VAR_DIR/script-state/${FAKE_CTDB_PNN}"
+ mkdir -p "$CTDB_SCRIPT_VARDIR"
}
setup_ctdb ()
cat >"$FAKE_CTDB_EXTRA_CONFIG"
}
+validate_percentage ()
+{
+ case "$1" in
+ [0-9]|[0-9][0-9]|100) return 0 ;;
+ *) echo "WARNING: ${1} is an invalid percentage${2:+\" in }${2}${2:+\"}"
+ return 1
+ esac
+}
+
setup_memcheck ()
{
+ _mem_usage="${1:-10}" # Default is 10%
+ _swap_usage="${2:-0}" # Default is 0%
+
setup_ctdb
- _swap_total="5857276"
+ _swap_total=5857276
+ _swap_free=$(( (100 - $_swap_usage) * $_swap_total / 100 ))
- if [ "$1" = "bad" ] ; then
- _swap_free=" 4352"
- _mem_cached=" 112"
- _mem_free=" 468"
- else
- _swap_free="$_swap_total"
- _mem_cached="1112"
- _mem_free="1468"
- fi
+ _mem_total=3940712
+ _mem_free=225268
+ _mem_buffers=146120
+ _mem_cached=$(( $_mem_total * (100 - $_mem_usage) / 100 - $_mem_free - $_mem_buffers ))
export FAKE_PROC_MEMINFO="\
-MemTotal: 3940712 kB
-MemFree: 225268 kB
-Buffers: 146120 kB
-Cached: 1139348 kB
+MemTotal: ${_mem_total} kB
+MemFree: ${_mem_free} kB
+Buffers: ${_mem_buffers} kB
+Cached: ${_mem_cached} kB
SwapCached: 56016 kB
Active: 2422104 kB
Inactive: 1019928 kB
SwapFree: ${_swap_free} kB
..."
- export FAKE_FREE_M="\
- total used free shared buffers cached
-Mem: 3848 3634 213 0 142 ${_mem_cached}
--/+ buffers/cache: 2379 ${_mem_free}
-Swap: 5719 246 5473"
+ export CTDB_MONITOR_MEMORY_USAGE
+ export CTDB_MONITOR_SWAP_USAGE
+}
+
+setup_fscheck ()
+{
+ export FAKE_FS_USE="${1:-10}" # Default is 10% usage
+
+ # Causes some variables to be exported
+ setup_ctdb
- export CTDB_MONITOR_FREE_MEMORY
- export CTDB_MONITOR_FREE_MEMORY_WARN
- export CTDB_CHECK_SWAP_IS_NOT_USED
+ export CTDB_MONITOR_FILESYSTEM_USAGE
}
ctdb_get_interfaces ()
fi |
while read _dev _ip _bits ; do
_net=$(ipv4_host_addr_to_net "$_ip" "$_bits")
- _gw="${_net%.*}.1" # a dumb, calculated default
+ _gw="${_net%.*}.254" # a dumb, calculated default
echo "$_ip $_net"
fi | {
while read _dev _ip _bits ; do
_net=$(ipv4_host_addr_to_net "$_ip" "$_bits")
- _gw="${_net%.*}.1" # a dumb, calculated default
+ _gw="${_net%.*}.254" # a dumb, calculated default
_policy_rules="${_policy_rules}
${CTDB_PER_IP_ROUTING_RULE_PREF}: from $_ip lookup ctdb.$_ip "
######################################################################
+setup_ctdb_lvs ()
+{
+ lvs_state_dir="${EVENTSCRIPTS_TESTS_VAR_DIR}/lvs"
+ mkdir -p "$lvs_state_dir"
+
+ export FAKE_LVS_STATE_DIR="${lvs_state_dir}/state"
+ mkdir "$FAKE_LVS_STATE_DIR"
+
+ lvs_header=$(ipvsadm -l -n)
+
+ export CTDB_LVS_PUBLIC_IP="$1"
+ export CTDB_LVS_PUBLIC_IFACE="$2"
+
+ [ -n "$CTDB_LVS_PUBLIC_IP" ] || return 0
+ [ -n "$CTDB_LVS_PUBLIC_IFACE" ] || return 0
+
+ export CTDB_LVS_NODES=$(mktemp --tmpdir="$lvs_state_dir")
+ export FAKE_CTDB_LVS_MASTER=""
+
+ # Read from stdin
+ _pnn=0
+ while read _ip _opts ; do
+ case "$_opts" in
+ master)
+ FAKE_CTDB_LVS_MASTER="$_pnn"
+ echo "$_ip"
+ ;;
+ slave-only)
+ printf "%s\tslave-only\n" "$_ip"
+ ;;
+ *)
+ echo "$_ip"
+ ;;
+ esac
+ _pnn=$(($_pnn + 1))
+ done >"$CTDB_LVS_NODES"
+}
+
+check_ipvsadm ()
+{
+ if [ "$1" = "NULL" ] ; then
+ required_result 0 <<EOF
+$lvs_header
+EOF
+ else
+ required_result 0 <<EOF
+$lvs_header
+$(cat)
+EOF
+ fi
+
+ simple_test_command ipvsadm -l -n
+}
+
+check_lvs_ip ()
+{
+ _scope="$1"
+
+ if [ "$_scope" = "NULL" ] ; then
+ required_result 0 <<EOF
+1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
+ link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
+EOF
+ else
+ required_result 0 <<EOF
+1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
+ link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
+ inet ${CTDB_LVS_PUBLIC_IP}/32 scope ${_scope} lo
+ valid_lft forever preferred_lft forever
+EOF
+ fi
+
+ simple_test_command ip addr show dev lo
+}
+
+######################################################################
+
ctdb_catdb_format_pairs ()
{
_count=0
setup_ctdb_natgw ()
{
- debug "Setting up NAT gateway"
+ debug "Setting up NAT gateway"
- natgw_config_dir="${TEST_VAR_DIR}/natgw_config"
- mkdir -p "$natgw_config_dir"
+ natgw_config_dir="${TEST_VAR_DIR}/natgw_config"
+ mkdir -p "$natgw_config_dir"
- # These will accumulate, 1 per test... but will be cleaned up at
- # the end.
- export CTDB_NATGW_NODES=$(mktemp --tmpdir="$natgw_config_dir")
+ # These will accumulate, 1 per test... but will be cleaned up at
+ # the end.
+ export CTDB_NATGW_NODES=$(mktemp --tmpdir="$natgw_config_dir")
- # Read from stdin
- while read _ip _master _dev ; do
- echo "$_ip"
- if [ "$_master" = "master" ] ; then
- export FAKE_CTDB_NATGW_MASTER="$_ip"
- fi
- done >"$CTDB_NATGW_NODES"
-
- # Assume all of the nodes are on a /24 network and have IPv4
- # addresses:
- read _ip <"$CTDB_NATGW_NODES"
- export CTDB_NATGW_PRIVATE_NETWORK="${_ip%.*}.0/24"
-
- # These are fixed. Probably don't use the same network for the
- # private node IPs. To unset the default gateway just set it to
- # "". :-)
- export CTDB_NATGW_PUBLIC_IP="10.1.1.121/24"
- export CTDB_NATGW_PUBLIC_IFACE="eth1"
- export CTDB_NATGW_DEFAULT_GATEWAY="10.1.1.254"
- export CTDB_NATGW_SLAVE_ONLY=""
+ # Read from stdin
+ while read _ip _opts ; do
+ case "$_opts" in
+ master)
+ export FAKE_CTDB_NATGW_MASTER="$_ip"
+ echo "$_ip"
+ ;;
+ slave-only)
+ printf "%s\tslave-only\n" "$_ip"
+ ;;
+ *)
+ echo "$_ip"
+ ;;
+ esac
+ done >"$CTDB_NATGW_NODES"
+
+ # Assume all of the nodes are on a /24 network and have IPv4
+ # addresses:
+ read _ip <"$CTDB_NATGW_NODES"
+ export CTDB_NATGW_PRIVATE_NETWORK="${_ip%.*}.0/24"
+
+ # These are fixed. Probably don't use the same network for the
+ # private node IPs. To unset the default gateway just set it to
+ # "". :-)
+ export CTDB_NATGW_PUBLIC_IP="10.1.1.121/24"
+ export CTDB_NATGW_PUBLIC_IFACE="eth1"
+ export CTDB_NATGW_DEFAULT_GATEWAY="10.1.1.254"
+ export CTDB_NATGW_SLAVE_ONLY=""
}
ok_natgw_master_ip_addr_show ()
fi
}
+samba_setup_fake_threads ()
+{
+ export FAKE_SMBD_THREAD_PIDS="$*"
+
+ _nl="
+"
+ _out=""
+ _count=0
+ for _pid ; do
+ [ "$_count" -lt 5 ] || break
+ _t=$(program_stack_trace "smbd" $_pid)
+ _out="${_out:+${_out}${_nl}}${_t}"
+ _count=$((_count + 1))
+ done
+ SAMBA_STACK_TRACES="$_out"
+}
+
setup_winbind ()
{
setup_ctdb
export CTDB_NFS_SKIP_SHARE_CHECK="no"
- export CTDB_MONITOR_NFS_THREAD_COUNT RPCNFSDCOUNT FAKE_NFSD_THREAD_PIDS
- export CTDB_NFS_DUMP_STUCK_THREADS FAKE_RPC_THREAD_PIDS
+ export RPCNFSDCOUNT
+
+ # This doesn't even need to exist
+ export CTDB_NFS_EXPORTS_FILE="$EVENTSCRIPTS_TESTS_VAR_DIR/etc-exports"
# Reset the failcounts for nfs services.
eventscript_call eval rm -f '$ctdb_fail_dir/nfs_*'
debug "Setting up NFS environment: all RPC services up, NFS managed by CTDB"
eventscript_call ctdb_service_managed
- service "nfs" force-started # might not be enough
+ service "nfs" force-started
+ service "nfslock" force-started
export CTDB_MANAGED_SERVICES="foo nfs bar"
- rpc_services_up "nfs" "mountd" "rquotad" "nlockmgr" "status"
+ rpc_services_up \
+ "portmapper" "nfs" "mountd" "rquotad" "nlockmgr" "status"
+
+ nfs_setup_fake_threads "nfsd"
+ nfs_setup_fake_threads "rpc.foobar" # Just set the variable to empty
else
debug "Setting up NFS environment: all RPC services down, NFS not managed by CTDB"
eventscript_call ctdb_service_unmanaged
- service "nfs" force-stopped # might not be enough
- eventscript_call startstop_nfs stop
+ service "nfs" force-stopped
+ service "nfslock" force-stopped
export CTDB_MANAGED_SERVICES="foo bar"
unset CTDB_MANAGES_NFS
fi
+
+ # This is really nasty. However, when we test NFS we don't
+ # actually test statd-callout. If we leave it there then left
+ # over, backgrounded instances of statd-callout will do horrible
+ # things with the "ctdb ip" stub and cause the actual
+ # statd-callout tests that follow to fail.
+ rm "${CTDB_BASE}/statd-callout"
}
setup_nfs_ganesha ()
{
setup_nfs "$@"
- export CTDB_NFS_SERVER_MODE="ganesha"
+ export CTDB_NFS_CALLOUT="${CTDB_BASE}/nfs-ganesha-callout"
if [ "$1" != "down" ] ; then
export CTDB_MANAGES_NFS="yes"
fi
- # We do not support testing the Ganesha-nfsd-specific part of the
- # eventscript.
- export CTDB_SKIP_GANESHA_NFSD_CHECK="yes"
export CTDB_NFS_SKIP_SHARE_CHECK="yes"
}
for _i ; do
debug "Marking RPC service \"${_i}\" as available"
case "$_i" in
- nfs) _t="2:3" ;;
- mountd) _t="1:3" ;;
- rquotad) _t="1:2" ;;
- nlockmgr) _t="3:4" ;;
- status) _t="1:1" ;;
+ portmapper) _t="2:4" ;;
+ nfs) _t="2:3" ;;
+ mountd) _t="1:3" ;;
+ rquotad) _t="1:2" ;;
+ nlockmgr) _t="3:4" ;;
+ status) _t="1:1" ;;
*) die "Internal error - unsupported RPC service \"${_i}\"" ;;
esac
nfs_load_config ()
{
- _etc="$CTDB_ETCDIR" # shortcut for readability
+ _etc="$CTDB_SYS_ETCDIR" # shortcut for readability
for _c in "$_etc/sysconfig/nfs" "$_etc/default/nfs" "$_etc/ctdb/sysconfig/nfs" ; do
if [ -r "$_c" ] ; then
. "$_c"
done
}
+nfs_setup_fake_threads ()
+{
+ _prog="$1" ; shift
+
+ case "$_prog" in
+ nfsd)
+ export PROCFS_PATH=$(mktemp -d --tmpdir="$EVENTSCRIPTS_TESTS_VAR_DIR")
+ _threads="${PROCFS_PATH}/fs/nfsd/threads"
+ mkdir -p $(dirname "$_threads")
+ echo $# >"$_threads"
+ export FAKE_NFSD_THREAD_PIDS="$*"
+ ;;
+ *)
+ export FAKE_RPC_THREAD_PIDS="$*"
+ ;;
+ esac
+}
+
+program_stack_trace ()
+{
+ _prog="$1"
+ _pid="$2"
+
+ cat <<EOF
+Stack trace for ${_prog}[${_pid}]:
+[<ffffffff87654321>] fake_stack_trace_for_pid_${_pid}/stack+0x0/0xff
+EOF
+}
+
+program_stack_traces ()
+{
+ _prog="$1"
+ _max="${2:-1}"
+
+ _count=1
+ for _pid in ${FAKE_NFSD_THREAD_PIDS:-$FAKE_RPC_THREAD_PIDS} ; do
+ [ $_count -le $_max ] || break
+
+ program_stack_trace "$_prog" "$_pid"
+ _count=$(($_count + 1))
+ done
+}
+
+guess_output ()
+{
+ case "$1" in
+ $CTDB_NFS_CALLOUT\ start\ nlockmgr)
+ echo "&Starting nfslock: OK"
+ ;;
+ $CTDB_NFS_CALLOUT\ start\ nfs)
+ cat <<EOF
+&Starting nfslock: OK
+&Starting nfs: OK
+EOF
+ ;;
+ *)
+ : # Nothing
+ esac
+}
# Set the required result for a particular RPC program having failed
# for a certain number of iterations. This is probably still a work
# function being incomplete.
rpc_set_service_failure_response ()
{
- _progname="$1"
- # The number of failures defaults to the iteration number. This
- # will be true when we fail from the 1st iteration... but we need
- # the flexibility to set the number of failures.
- _numfails="${2:-${iteration}}"
+ _rpc_service="$1"
+ _numfails="${2:-1}" # default 1
+
+ # Default
+ ok_null
+ if [ $_numfails -eq 0 ] ; then
+ return
+ fi
nfs_load_config
_nl="
"
- # Default
- ok_null
+ _dir="${CTDB_NFS_CHECKS_DIR:-${CTDB_BASE}/nfs-checks.d}"
- _file=$(ls "${CTDB_BASE}/nfs-rpc-checks.d/"[0-9][0-9]."${_progname}.check")
+ _file=$(ls "$_dir"/[0-9][0-9]."${_rpc_service}.check")
[ -r "$_file" ] || die "RPC check file \"$_file\" does not exist or is not unique"
- while read _op _li _actions ; do
- # Skip comments
- case "$_op" in
- \#*) continue ;;
- esac
+ _out=$(mktemp --tmpdir="$EVENTSCRIPTS_TESTS_VAR_DIR")
+ _rc_file=$(mktemp --tmpdir="$EVENTSCRIPTS_TESTS_VAR_DIR")
- _hit=false
- if [ "$_op" != "%" ] ; then
- if [ $_numfails $_op $_li ] ; then
- _hit=true
- fi
+ (
+ # Subshell to restrict scope variables...
+
+ # Defaults
+ family="tcp"
+ version=""
+ unhealthy_after=1
+ restart_every=0
+ service_stop_cmd=""
+ service_start_cmd=""
+ service_check_cmd=""
+ service_debug_cmd=""
+
+ # Don't bother syntax checking, eventscript does that...
+ . "$_file"
+
+ # Just use the first version, or use default. This is dumb but
+ # handles all the cases that we care about now...
+ if [ -n "$version" ] ; then
+ _ver="${version%% *}"
else
- if [ $(($_numfails $_op $_li)) -eq 0 ] ; then
- _hit=true
- fi
+ case "$_rpc_service" in
+ portmapper) _ver="" ;;
+ *) _ver=1 ;;
+ esac
fi
- if $_hit ; then
- _out=""
- _rc=0
- for _action in $_actions ; do
- case "$_action" in
- verbose)
- _ver=1
- _pn="$_progname"
- case "$_progname" in
- nfsd) _ver=3 ; _pn="nfs" ;;
- lockd) _ver=4 ; _pn="nlockmgr" ;;
- statd) _pn="status" ;;
- esac
- _out="\
-ERROR: $_pn failed RPC check:
+ _rpc_check_out="\
+$_rpc_service failed RPC check:
rpcinfo: RPC: Program not registered
-program $_pn version $_ver is not available"
- ;;
- restart*)
- _p="rpc.${_progname}"
- case "$_action" in
- *:b) _bg="&" ;;
- *) _bg="" ;;
- esac
- case "$_progname" in
- nfsd)
- _t="\
-Trying to restart NFS service"
-
- if [ -n "$CTDB_NFS_DUMP_STUCK_THREADS" ] ; then
- for _pid in $FAKE_NFSD_THREAD_PIDS ; do
- _t="\
-$_t
-${_bg}Stack trace for nfsd[${_pid}]:
-${_bg}[<ffffffff87654321>] fake_stack_trace_for_pid_${_pid}/stack+0x0/0xff"
- done
- fi
-
- _t="\
-${_t}
-${_bg}Starting nfslock: OK
-${_bg}Starting nfs: OK"
- ;;
- lockd)
- _t="\
-Trying to restart lock manager service
-${_bg}Starting nfslock: OK"
- ;;
- *)
- _t="Trying to restart $_progname [${_p}]"
- if [ -n "$CTDB_NFS_DUMP_STUCK_THREADS" ] ; then
- for _pid in $FAKE_RPC_THREAD_PIDS ; do
- _t="\
-$_t
-Stack trace for ${_p}[${_pid}]:
-[<ffffffff87654321>] fake_stack_trace_for_pid_${_pid}/stack+0x0/0xff"
- done
- fi
- esac
- _out="${_out}${_out:+${_nl}}${_t}"
- ;;
- unhealthy)
- _rc=1
- esac
- done
- required_result $_rc "$_out"
- return
+program $_rpc_service${_ver:+ version }${_ver} is not available"
+
+ if [ $unhealthy_after -gt 0 -a $_numfails -ge $unhealthy_after ] ; then
+ _unhealthy=true
+ echo 1 >"$_rc_file"
+ echo "ERROR: ${_rpc_check_out}" >>"$_out"
+ else
+ _unhealthy=false
+ echo 0 >"$_rc_file"
+ fi
+
+ if [ $restart_every -gt 0 ] && \
+ [ $(($_numfails % $restart_every)) -eq 0 ] ; then
+ if ! $_unhealthy ; then
+ echo "WARNING: ${_rpc_check_out}" >>"$_out"
+ fi
+
+ echo "Trying to restart service \"${_rpc_service}\"..." >>"$_out"
+
+ if [ -n "$service_debug_cmd" ] ; then
+ $service_debug_cmd 2>&1 >>"$_out"
+ fi
+
+ guess_output "$service_start_cmd" >>"$_out"
fi
- done <"$_file"
+ )
+
+ read _rc <"$_rc_file"
+ required_result $_rc <"$_out"
+
+ rm -f "$_out" "$_rc_file"
+}
+
+######################################################################
+
+# Recovery lock fakery
+
+cleanup_reclock ()
+{
+ _pattern="${script_dir}/${script}"
+ while pgrep -f "$_pattern" >/dev/null ; do
+ echo "Waiting for backgrounded ${script} to exit..."
+ (FAKE_SLEEP_REALLY=yes sleep 1)
+ done
+}
+
+setup_reclock ()
+{
+ CTDB_RECOVERY_LOCK=$(mktemp --tmpdir="$EVENTSCRIPTS_TESTS_VAR_DIR")
+ export CTDB_RECOVERY_LOCK
+
+ test_cleanup cleanup_reclock
}
######################################################################
##################################################
CTDB_BASE="$CTDB_BASE"
-CTDB_ETCDIR="$CTDB_ETCDIR"
+CTDB_SYS_ETCDIR="$CTDB_SYS_ETCDIR"
ctdb client is "$(which ctdb)"
ip command is "$(which ip)"
EOF
}
- _shell=""
- if $TEST_COMMAND_TRACE ; then
- _shell="sh -x"
- else
- _shell="sh"
- fi
- _out=$($_shell "${script_dir}/${script}" "$event" "$@" 2>&1)
-
- result_check
+ script_test "${script_dir}/${script}" "$event" "$@"
reset_test_header
reset_extra_header
simple_test_command ()
{
- # If something has previously failed then don't continue.
- : ${_passed:=true}
- $_passed || return 1
-
- echo "=================================================="
- echo "Running command \"$*\""
- _out=$("$@" 2>&1)
-
- result_check
+ unit_test "$@"
}
-# Run an eventscript iteratively.
+# Run an NFS eventscript iteratively.
+#
# - 1st argument is the number of iterations.
-# - 2nd argument is something to eval to do setup for every iteration.
-# The easiest thing to do here is to define a function and pass it
-# here.
+#
+# - 2nd argument is the NFS/RPC service being tested
+#
+# rpcinfo (or $service_check_cmd) is used on each iteration to test
+# the availability of the service
+#
+# If this is not set or null then no RPC service is checked and the
+# required output is not reset on each iteration. This is useful in
+# baseline tests to confirm that the eventscript and test
+# infrastructure is working correctly.
+#
# - Subsequent arguments come in pairs: an iteration number and
-# something to eval for that iteration. Each time an iteration
+# something to eval before that iteration. Each time an iteration
# number is matched the associated argument is given to eval after
# the default setup is done. The iteration numbers need to be given
# in ascending order.
#
-# Some optional args can be given *before* these, surrounded by extra
-# "--" args. These args are passed to the eventscript. Quoting is
-# lost.
+# These arguments can allow a service to be started or stopped
+# before a particular iteration.
#
-# One use of the 2nd and further arguments is to call
-# required_result() to change what is expected of a particular
-# iteration.
-iterate_test ()
+nfs_iterate_test ()
{
- [ -n "$event" ] || die 'simple_test: $event not set'
-
- args=""
- if [ "$1" = "--" ] ; then
- shift
- while [ "$1" != "--" ] ; do
- args="${args}${args:+ }$1"
- shift
- done
+ _repeats="$1"
+ _rpc_service="$2"
+ if [ -n "$2" ] ; then
+ shift 2
+ else
shift
fi
- _repeats="$1"
- _setup_default="$2"
- shift 2
-
echo "Running $_repeats iterations of \"$script $event\" $args"
- _result=true
-
- extra_footer ()
- {
- cat <<EOF
---------------------------------------------------
-CTDB_BASE="$CTDB_BASE"
-CTDB_ETCDIR="$CTDB_ETCDIR"
-ctdb client is "$(which ctdb)"
-ip command is "$(which ip)"
---------------------------------------------------
-EOF
- }
-
- for iteration in $(seq 1 $_repeats) ; do
- # This is inefficient because the iteration-specific setup
- # might completely replace the default one. However, running
- # the default is good because it allows you to revert to a
- # particular result without needing to specify it explicitly.
- eval $_setup_default
- if [ $iteration = "$1" ] ; then
- eval $2
+ _iterate_failcount=0
+ for _iteration in $(seq 1 $_repeats) ; do
+ # This is not a numerical comparison because $1 will often not
+ # be set.
+ if [ "$_iteration" = "$1" ] ; then
+ debug "##################################################"
+ eval "$2"
+ debug "##################################################"
shift 2
fi
+ if [ -n "$_rpc_service" ] ; then
+ _ok=false
+ if [ -n "$service_check_cmd" ] ; then
+ if eval "$service_check_cmd" ; then
+ _ok=true
+ fi
+ else
+ if rpcinfo -T tcp localhost "$_rpc_service" >/dev/null 2>&1 ; then
+ _ok=true
+ fi
+ fi
- extra_header ()
- {
- cat <<EOF
-
-##################################################
-Iteration $iteration
-EOF
- }
-
- _shell=""
- if $TEST_COMMAND_TRACE ; then
- _shell="sh -x"
- else
- _shell="sh"
+ if $_ok ; then
+ _iterate_failcount=0
+ else
+ _iterate_failcount=$(($_iterate_failcount + 1))
+ fi
+ rpc_set_service_failure_response "$_rpc_service" $_iterate_failcount
fi
- _out=$($_shell "${script_dir}/${script}" "$event" $args 2>&1)
- _rc=$?
-
- _fout=$(echo "$_out" | result_filter)
-
- if [ "$_fout" = "$required_output" -a $_rc = $required_rc ] ; then
- _passed=true
- else
- _passed=false
- _result=false
+ _out=$(simple_test 2>&1)
+ _ret=$?
+ if "$TEST_VERBOSE" || [ $_ret -ne 0 ] ; then
+ echo "##################################################"
+ echo "Iteration ${_iteration}:"
+ echo "$_out"
+ fi
+ if [ $_ret -ne 0 ] ; then
+ exit $_ret
fi
-
- result_print "$_passed" "$_out" "$_rc"
done
-
- result_footer "$_result"
}