This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _NT_DOMAIN_H /* _NT_DOMAIN_H */
#define _NT_DOMAIN_H
-struct uuid {
- uint32 time_low;
- uint16 time_mid;
- uint16 time_hi_and_version;
- uint8 clock_seq[2];
- uint8 node[6];
-};
-#define UUID_SIZE 16
-
-#define UUID_FLAT_SIZE 16
-typedef struct uuid_flat {
- uint8 info[UUID_FLAT_SIZE];
-} UUID_FLAT;
-
-/* dce/rpc support */
-#include "rpc_dce.h"
-
-/* miscellaneous structures / defines */
-#include "rpc_misc.h"
-
-#include "rpc_creds.h"
-
-#include "talloc.h"
-
/*
* A bunch of stuff that was put into smb.h
* in the NTDOM branch - it didn't belong there.
uint32 grow_size; /* size requested via prs_grow() calls */
char *data_p; /* The buffer itself. */
TALLOC_CTX *mem_ctx; /* When unmarshalling, use this.... */
+ const char *sess_key; /* If we have to do encrypt/decrypt on the fly. */
} prs_struct;
/*
* The current PDU being returned. This inclues
* headers, data and authentication footer.
*/
- unsigned char current_pdu[MAX_PDU_FRAG_LEN];
+ unsigned char current_pdu[RPC_MAX_PDU_FRAG_LEN];
/* The amount of data in the current_pdu buffer. */
uint32 current_pdu_len;
* This is the current incoming pdu. The data here
* is collected via multiple writes until a complete
* pdu is seen, then the data is copied into the in_data
- * structure. The maximum size of this is 0x1630 (MAX_PDU_FRAG_LEN).
+ * structure. The maximum size of this is 0x1630 (RPC_MAX_PDU_FRAG_LEN).
*/
- unsigned char current_in_pdu[MAX_PDU_FRAG_LEN];
+ unsigned char current_in_pdu[RPC_MAX_PDU_FRAG_LEN];
/*
* The amount of data needed to complete the in_pdu.
/* Domain controller authentication protocol info */
struct dcinfo {
- DOM_CHAL clnt_chal; /* Initial challenge received from client */
- DOM_CHAL srv_chal; /* Initial server challenge */
- DOM_CRED clnt_cred; /* Last client credential */
- DOM_CRED srv_cred; /* Last server credential */
+ uint32 sequence; /* "timestamp" from client. */
+ DOM_CHAL seed_chal;
+ DOM_CHAL clnt_chal; /* Client credential */
+ DOM_CHAL srv_chal; /* Server credential */
- uchar sess_key[8]; /* Session key */
- uchar md4pw[16]; /* md4(machine password) */
+ unsigned char sess_key[16]; /* Session key - 8 bytes followed by 8 zero bytes */
+ unsigned char mach_pw[16]; /* md4(machine password) */
fstring mach_acct; /* Machine name we've authenticated. */
fstring remote_machine; /* Machine name we've authenticated. */
+ fstring domain;
BOOL challenge_sent;
- BOOL got_session_key;
BOOL authenticated;
-
};
typedef struct pipe_rpc_fns {
} PIPE_RPC_FNS;
+/*
+ * Different auth types we support.
+ * Can't keep in sync with wire values as spnego wraps different auth methods.
+ */
+
+enum pipe_auth_type { PIPE_AUTH_TYPE_NONE = 0, PIPE_AUTH_TYPE_NTLMSSP, PIPE_AUTH_TYPE_SCHANNEL,
+ PIPE_AUTH_TYPE_SPNEGO_NTLMSSP, PIPE_AUTH_TYPE_KRB5, PIPE_AUTH_TYPE_SPNEGO_KRB5 };
+
+/* Possible auth levels - keep these in sync with the wire values. */
+enum pipe_auth_level { PIPE_AUTH_LEVEL_NONE = 0,
+ PIPE_AUTH_LEVEL_CONNECT = 1, /* We treat as NONE. */
+ PIPE_AUTH_LEVEL_INTEGRITY = 5, /* Sign. */
+ PIPE_AUTH_LEVEL_PRIVACY = 6 /* Seal. */
+};
+
+/* auth state for krb5. */
+struct kerberos_auth_struct {
+ const char *service_principal;
+ DATA_BLOB session_key;
+};
+
+/* auth state for schannel. */
+struct schannel_auth_struct {
+ unsigned char sess_key[16];
+ uint32 seq_num;
+};
+
+/* auth state for all bind types. */
+
+struct pipe_auth_data {
+ enum pipe_auth_type auth_type; /* switch for union below. */
+ enum pipe_auth_level auth_level;
+ union {
+ struct schannel_auth_struct *schannel_auth;
+ AUTH_NTLMSSP_STATE *auth_ntlmssp_state;
+/* struct kerberos_auth_struct *kerberos_auth; TO BE ADDED... */
+ } a_u;
+ void (*auth_data_free_func)(struct pipe_auth_data *);
+};
+
/*
* DCE/RPC-specific samba-internal-specific handling of data on
* NamedPipes.
RPC_HDR hdr; /* Incoming RPC header. */
RPC_HDR_REQ hdr_req; /* Incoming request header. */
- uint32 ntlmssp_chal_flags; /* Client challenge flags. */
- BOOL ntlmssp_auth_requested; /* If the client wanted authenticated rpc. */
- BOOL ntlmssp_auth_validated; /* If the client *got* authenticated rpc. */
- unsigned char challenge[8];
- unsigned char ntlmssp_hash[258];
- uint32 ntlmssp_seq_num;
- struct dcinfo dc; /* Keeps the creds data. */
+ /* This context is used for pipe state storage and is freed when the pipe is closed. */
+ TALLOC_CTX *pipe_state_mem_ctx;
- /* Hmm. In my understanding the authentication happens
- implicitly later, so there are no two stages for
- schannel. */
+ struct pipe_auth_data auth;
- BOOL netsec_auth_validated;
- struct netsec_auth_struct netsec_auth;
+ struct dcinfo *dc; /* Keeps the creds data from netlogon. */
/*
* Windows user info.
fstring wks;
/*
- * Unix user name and credentials.
+ * Unix user name and credentials used when a pipe is authenticated.
*/
fstring pipe_user_name;
struct current_user pipe_user;
-
DATA_BLOB session_key;
-
+
/*
* Set to true when an RPC bind has been done on this pipe.
*/
*/
BOOL bad_handle_fault_state;
+
+ /*
+ * Set to true when the backend does not support a call.
+ */
+
+ BOOL rng_fault_state;
/*
* Set to RPC_BIG_ENDIAN when dealing with big-endian PDU's
output_data out_data;
- /* talloc context to use when allocating memory on this pipe. */
+ /* This context is used for PDU data and is freed between each pdu.
+ Don't use for pipe state storage. */
TALLOC_CTX *mem_ctx;
/* handle database to use on this pipe. */
* returns: state information representing the connection.
* is stored in np_state, above.
*/
- void * (*namedpipe_create)(char *pipe_name,
+ void * (*namedpipe_create)(const char *pipe_name,
connection_struct *conn, uint16 vuid);
/* call to perform a write / read namedpipe transaction.
/* end higher order functions */
-
-/* security descriptor structures */
-#include "rpc_secdes.h"
-
-/* pac */
-#include "authdata.h"
-
-/* different dce/rpc pipes */
-#include "rpc_lsa.h"
-#include "rpc_netlogon.h"
-#include "rpc_reg.h"
-#include "rpc_samr.h"
-#include "rpc_srvsvc.h"
-#include "rpc_wkssvc.h"
-#include "rpc_spoolss.h"
-#include "rpc_dfs.h"
-#include "rpc_ds.h"
-#include "rpc_echo.h"
-#include "rpc_shutdown.h"
+typedef struct {
+ uint32 size;
+ prs_struct prs;
+ uint32 struct_start;
+ uint32 string_at_end;
+} RPC_BUFFER;
#endif /* _NT_DOMAIN_H */
git.samba.org / samba.git / blobdiff