/*
* This module supports JFS (POSIX) ACLs on VxFS (Veritas * Filesystem).
- * These are available on HP-UX 11.00 if JFS 3.3 is installed.
+ * These are available on HP-UX 11.00 if JFS 3.3 is installed.
* On HP-UX 11i (11.11 and above) these ACLs are supported out of
* the box.
*
* and did similar adaptations as were done before, essentially
* reusing the original internal aclsort functions.
* The check for the presence of the acl() call has been adopted, and
- * a check for the presence of the aclsort() call has been added.
- *
+ * a check for the presence of the aclsort() call has been added.
+ *
* Michael Adam <obnox@samba.org>
*
* ================================================================= */
#include "modules/vfs_hpuxacl.h"
-/*
- * including standard header <sys/aclv.h>
+/*
+ * including standard header <sys/aclv.h>
*
* included here as a quick hack for the special HP-UX-situation:
*
* The problem is that, on HP-UX, jfs/posix acls are
- * defined in <sys/aclv.h>, while the deprecated hfs acls
+ * defined in <sys/aclv.h>, while the deprecated hfs acls
* are defined inside <sys/acl.h>.
*
*/
typedef int HPUX_ACL_TAG_T; /* the type of an ACL entry */
typedef ushort HPUX_PERM_T;
-/* Structure to capture the count for each type of ACE.
+/* Structure to capture the count for each type of ACE.
* (for hpux_internal_aclsort */
struct hpux_acl_types {
int n_user;
/* prototypes for private functions */
static HPUX_ACL_T hpux_acl_init(int count);
-static bool smb_acl_to_hpux_acl(SMB_ACL_T smb_acl,
- HPUX_ACL_T *solariacl, int *count,
+static bool smb_acl_to_hpux_acl(SMB_ACL_T smb_acl,
+ HPUX_ACL_T *solariacl, int *count,
SMB_ACL_TYPE_T type);
static SMB_ACL_T hpux_acl_to_smb_acl(HPUX_ACL_T hpuxacl, int count,
SMB_ACL_TYPE_T type, TALLOC_CTX *mem_ctx);
static SMB_ACL_TAG_T hpux_tag_to_smb_tag(HPUX_ACL_TAG_T hpux_tag);
static bool hpux_add_to_acl(HPUX_ACL_T *hpux_acl, int *count,
HPUX_ACL_T add_acl, int add_count, SMB_ACL_TYPE_T type);
-static bool hpux_acl_get_file(const char *name, HPUX_ACL_T *hpuxacl,
+static bool hpux_acl_get_file(const char *name, HPUX_ACL_T *hpuxacl,
int *count);
static SMB_ACL_PERM_T hpux_perm_to_smb_perm(const HPUX_PERM_T perm);
static HPUX_PERM_T smb_perm_to_hpux_perm(const SMB_ACL_PERM_T perm);
/* aclsort (internal) and helpers: */
static bool hpux_acl_sort(HPUX_ACL_T acl, int count);
static int hpux_internal_aclsort(int acl_count, int calclass, HPUX_ACL_T aclp);
-static void hpux_count_obj(int acl_count, HPUX_ACL_T aclp,
+static void hpux_count_obj(int acl_count, HPUX_ACL_T aclp,
struct hpux_acl_types *acl_type_count);
static void hpux_swap_acl_entries(HPUX_ACE_T *aclp0, HPUX_ACE_T *aclp1);
static bool hpux_prohibited_duplicate_type(int acl_type);
/* public functions - the api */
-SMB_ACL_T hpuxacl_sys_acl_get_file(vfs_handle_struct *handle,
- const char *path_p,
- SMB_ACL_TYPE_T type,
- TALLOC_CTX *mem_ctx)
+static SMB_ACL_T hpuxacl_sys_acl_get_file(vfs_handle_struct *handle,
+ const struct smb_filename *smb_fname,
+ SMB_ACL_TYPE_T type,
+ TALLOC_CTX *mem_ctx)
{
SMB_ACL_T result = NULL;
int count;
HPUX_ACL_T hpux_acl = NULL;
+ const char *path_p = smb_fname->base_name;
- DEBUG(10, ("hpuxacl_sys_acl_get_file called for file '%s'.\n",
+ DEBUG(10, ("hpuxacl_sys_acl_get_file called for file '%s'.\n",
path_p));
if(hpux_acl_call_present() == False) {
- /* Looks like we don't have the acl() system call on HPUX.
+ /* Looks like we don't have the acl() system call on HPUX.
* May be the system doesn't have the latest version of JFS.
*/
goto done;
goto done;
}
- DEBUGADD(10, ("getting %s acl\n",
+ DEBUGADD(10, ("getting %s acl\n",
((type == SMB_ACL_TYPE_ACCESS) ? "access" : "default")));
if (!hpux_acl_get_file(path_p, &hpux_acl, &count)) {
*/
SMB_ACL_T hpuxacl_sys_acl_get_fd(vfs_handle_struct *handle,
files_struct *fsp,
+ SMB_ACL_TYPE_T type,
TALLOC_CTX *mem_ctx)
{
- /*
- * HPUX doesn't have the facl call. Fake it using the path.... JRA.
+ /*
+ * HPUX doesn't have the facl call. Fake it using the path.... JRA.
*/
/*
* We know we're in the same conn context. So we
return hpuxacl_sys_acl_get_file(handle,
fsp->fsp_name->base_name,
- SMB_ACL_TYPE_ACCESS,
+ type,
mem_ctx);
}
int hpuxacl_sys_acl_set_file(vfs_handle_struct *handle,
- const char *name,
+ const struct smb_filename *smb_fname_in,
SMB_ACL_TYPE_T type,
SMB_ACL_T theacl)
{
DEBUG(10, ("hpuxacl_sys_acl_set_file called for file '%s'\n",
name));
- smb_fname = synthetic_smb_fname(talloc_tos(), name, NULL, NULL, 0);
+ smb_fname = cp_smb_filename(talloc_tos(), smb_fname_in);
if (smb_fname == NULL) {
status = NT_STATUS_NO_MEMORY;
goto done;
}
if(hpux_acl_call_present() == False) {
- /* Looks like we don't have the acl() system call on HPUX.
+ /* Looks like we don't have the acl() system call on HPUX.
* May be the system doesn't have the latest version of JFS.
*/
goto done;
DEBUG(10, ("invalid smb acl type given (%d).\n", type));
goto done;
}
- DEBUGADD(10, ("setting %s acl\n",
+ DEBUGADD(10, ("setting %s acl\n",
((type == SMB_ACL_TYPE_ACCESS) ? "access" : "default")));
if(!smb_acl_to_hpux_acl(theacl, &hpux_acl, &count, type)) {
* that has _not_ been specified in "type" from the file first
* and concatenate it with the acl provided.
*/
- HPUX_ACL_T other_acl;
+ HPUX_ACL_T other_acl;
int other_count;
SMB_ACL_TYPE_T other_type;
- other_type = (type == SMB_ACL_TYPE_ACCESS)
+ other_type = (type == SMB_ACL_TYPE_ACCESS)
? SMB_ACL_TYPE_DEFAULT
: SMB_ACL_TYPE_ACCESS;
DEBUGADD(10, ("getting acl from filesystem\n"));
goto done;
}
DEBUG(10, ("adding %s part of fs acl to given acl\n",
- ((other_type == SMB_ACL_TYPE_ACCESS)
+ ((other_type == SMB_ACL_TYPE_ACCESS)
? "access"
: "default")));
if (!hpux_add_to_acl(&hpux_acl, &count, other_acl,
- other_count, other_type))
+ other_count, other_type))
{
DEBUG(10, ("error adding other acl.\n"));
SAFE_FREE(other_acl);
}
/*
- * set the access ACL on the file referred to by a fd
+ * set the access ACL on the file referred to by a fd
*/
int hpuxacl_sys_acl_set_fd(vfs_handle_struct *handle,
files_struct *fsp,
+ SMB_ACL_TYPE_T type,
SMB_ACL_T theacl)
{
/*
return hpuxacl_sys_acl_set_file(handle,
fsp->fsp_name->base_name,
- SMB_ACL_TYPE_ACCESS, theacl);
+ type, theacl);
}
-
/*
* delete the default ACL of a directory
*
- * This is achieved by fetching the access ACL and rewriting it
- * directly, via the hpux system call: the ACL_SET call on
+ * This is achieved by fetching the access ACL and rewriting it
+ * directly, via the hpux system call: the ACL_SET call on
* directories writes both the access and the default ACL as provided.
*
* XXX: posix acl_delete_def_file returns an error if
* the file referred to by path is not a directory.
- * this function does not complain but the actions
+ * this function does not complain but the actions
* have no effect on a file other than a directory.
* But sys_acl_delete_default_file is only called in
* smbd/posixacls.c after having checked that the file
* is a directory, anyways. So implementing the extra
* check is considered unnecessary. --- Agreed? XXX
*/
-int hpuxacl_sys_acl_delete_def_file(vfs_handle_struct *handle,
- const char *path)
+int hpuxacl_sys_acl_delete_def_fd(vfs_handle_struct *handle,
+ files_struct *fsp)
{
SMB_ACL_T smb_acl;
int ret = -1;
HPUX_ACL_T hpux_acl;
int count;
- DEBUG(10, ("entering hpuxacl_sys_acl_delete_def_file.\n"));
+ DBG_DEBUG("entering hpuxacl_sys_acl_delete_def_fd.\n");
- smb_acl = hpuxacl_sys_acl_get_file(handle, path,
+ smb_acl = hpuxacl_sys_acl_get_file(handle, fsp->fsp_name->base_name,
SMB_ACL_TYPE_ACCESS);
if (smb_acl == NULL) {
- DEBUG(10, ("getting file acl failed!\n"));
+ DBG_DEBUG("getting file acl failed!\n");
goto done;
}
- if (!smb_acl_to_hpux_acl(smb_acl, &hpux_acl, &count,
+ if (!smb_acl_to_hpux_acl(smb_acl, &hpux_acl, &count,
SMB_ACL_TYPE_ACCESS))
{
- DEBUG(10, ("conversion smb_acl -> hpux_acl failed.\n"));
+ DBG_DEBUG("conversion smb_acl -> hpux_acl failed.\n");
goto done;
}
if (!hpux_acl_sort(hpux_acl, count)) {
- DEBUG(10, ("resulting acl is not valid!\n"));
+ DBG_DEBUG("resulting acl is not valid!\n");
goto done;
}
- ret = acl(discard_const_p(char, path), ACL_SET, count, hpux_acl);
+ ret = acl(discard_const_p(char, fsp->fsp_name->base_name),
+ ACL_SET, count, hpux_acl);
if (ret != 0) {
- DEBUG(10, ("settinge file acl failed!\n"));
+ DBG_DEBUG("settinge file acl failed!\n");
}
done:
- DEBUG(10, ("hpuxacl_sys_acl_delete_def_file %s.\n",
- ((ret != 0) ? "failed" : "succeeded" )));
+ DBG_DEBUG("hpuxacl_sys_acl_delete_def_fd %s.\n",
+ ((ret != 0) ? "failed" : "succeeded" ));
TALLOC_FREE(smb_acl);
return ret;
}
-
-/*
- * private functions
+/*
+ * private functions
*/
static HPUX_ACL_T hpux_acl_init(int count)
{
- HPUX_ACL_T hpux_acl =
+ HPUX_ACL_T hpux_acl =
(HPUX_ACL_T)SMB_MALLOC(sizeof(HPUX_ACE_T) * count);
if (hpux_acl == NULL) {
errno = ENOMEM;
}
/*
- * Convert the SMB acl to the ACCESS or DEFAULT part of a
+ * Convert the SMB acl to the ACCESS or DEFAULT part of a
* hpux ACL, as desired.
*/
-static bool smb_acl_to_hpux_acl(SMB_ACL_T smb_acl,
- HPUX_ACL_T *hpux_acl, int *count,
+static bool smb_acl_to_hpux_acl(SMB_ACL_T smb_acl,
+ HPUX_ACL_T *hpux_acl, int *count,
SMB_ACL_TYPE_T type)
{
bool ret = False;
}
switch(hpux_entry.a_type) {
case USER:
- DEBUG(10, ("got tag type USER with uid %d\n",
+ DEBUG(10, ("got tag type USER with uid %d\n",
smb_entry->info.user.uid));
hpux_entry.a_id = (uid_t)smb_entry->info.user.uid;
break;
case GROUP:
- DEBUG(10, ("got tag type GROUP with gid %d\n",
+ DEBUG(10, ("got tag type GROUP with gid %d\n",
smb_entry->info.group.gid));
hpux_entry.a_id = (uid_t)smb_entry->info.group.gid;
break;
hpux_entry.a_type |= ACL_DEFAULT;
}
- hpux_entry.a_perm =
+ hpux_entry.a_perm =
smb_perm_to_hpux_perm(smb_entry->a_perm);
DEBUG(10, ("assembled the following hpux ace:\n"));
DEBUGADD(10, (" - type: 0x%04x\n", hpux_entry.a_type));
DEBUGADD(10, (" - id: %d\n", hpux_entry.a_id));
DEBUGADD(10, (" - perm: o%o\n", hpux_entry.a_perm));
- if (!hpux_add_to_acl(hpux_acl, count, &hpux_entry,
+ if (!hpux_add_to_acl(hpux_acl, count, &hpux_entry,
1, type))
{
DEBUG(10, ("error adding acl entry\n"));
return ret;
}
-/*
- * convert either the access or the default part of a
+/*
+ * convert either the access or the default part of a
* soaris acl to the SMB_ACL format.
*/
-static SMB_ACL_T hpux_acl_to_smb_acl(HPUX_ACL_T hpux_acl, int count,
+static SMB_ACL_T hpux_acl_to_smb_acl(HPUX_ACL_T hpux_acl, int count,
SMB_ACL_TYPE_T type, TALLOC_CTX *mem_ctx)
{
SMB_ACL_T result;
sys_acl_set_qualifier(smb_entry, (void *)&hpux_acl[i].a_id);
smb_perm = hpux_perm_to_smb_perm(hpux_acl[i].a_perm);
if (sys_acl_set_permset(smb_entry, &smb_perm) != 0) {
- DEBUG(10, ("invalid permset given: %d\n",
+ DEBUG(10, ("invalid permset given: %d\n",
hpux_acl[i].a_perm));
goto fail;
}
SMB_ACL_TAG_T smb_tag = 0;
DEBUG(10, ("hpux_tag_to_smb_tag:\n"));
- DEBUGADD(10, (" --> got hpux tag 0x%04x\n", hpux_tag));
+ DEBUGADD(10, (" --> got hpux tag 0x%04x\n", hpux_tag));
- hpux_tag &= ~ACL_DEFAULT;
+ hpux_tag &= ~ACL_DEFAULT;
switch (hpux_tag) {
case USER:
smb_tag = SMB_ACL_MASK;
break;
default:
- DEBUGADD(10, (" !!! unknown hpux tag type: 0x%04x\n",
+ DEBUGADD(10, (" !!! unknown hpux tag type: 0x%04x\n",
hpux_tag));
break;
}
}
-/*
- * The permission bits used in the following two permission conversion
- * functions are same, but the functions make us independent of the concrete
+/*
+ * The permission bits used in the following two permission conversion
+ * functions are same, but the functions make us independent of the concrete
* permission data types.
*/
static SMB_ACL_PERM_T hpux_perm_to_smb_perm(const HPUX_PERM_T perm)
}
-static bool hpux_acl_get_file(const char *name, HPUX_ACL_T *hpux_acl,
+static bool hpux_acl_get_file(const char *name, HPUX_ACL_T *hpux_acl,
int *count)
{
bool result = False;
DEBUG(10, ("hpux_acl_get_file called for file '%s'\n", name));
- /*
+ /*
* The original code tries some INITIAL_ACL_SIZE
* and only did the ACL_CNT call upon failure
* (for performance reasons).
- * For the sake of simplicity, I skip this for now.
+ * For the sake of simplicity, I skip this for now.
*
* NOTE: There is a catch here on HP-UX: acl with cmd parameter
* ACL_CNT fails with errno EINVAL when called with a NULL
* Add entries to a hpux ACL.
*
* Entries are directly added to the hpuxacl parameter.
- * if memory allocation fails, this may result in hpuxacl
- * being NULL. if the resulting acl is to be checked and is
+ * if memory allocation fails, this may result in hpuxacl
+ * being NULL. if the resulting acl is to be checked and is
* not valid, it is kept in hpuxacl but False is returned.
*
- * The type of ACEs (access/default) to be added to the ACL can
- * be selected via the type parameter.
+ * The type of ACEs (access/default) to be added to the ACL can
+ * be selected via the type parameter.
* I use the SMB_ACL_TYPE_T type here. Since SMB_ACL_TYPE_ACCESS
* is defined as "0", this means that one can only add either
- * access or default ACEs from the given ACL, not both at the same
- * time. If it should become necessary to add all of an ACL, one
+ * access or default ACEs from the given ACL, not both at the same
+ * time. If it should become necessary to add all of an ACL, one
* would have to replace this parameter by another type.
*/
static bool hpux_add_to_acl(HPUX_ACL_T *hpux_acl, int *count,
- HPUX_ACL_T add_acl, int add_count,
+ HPUX_ACL_T add_acl, int add_count,
SMB_ACL_TYPE_T type)
{
int i;
- if ((type != SMB_ACL_TYPE_ACCESS) && (type != SMB_ACL_TYPE_DEFAULT))
+ if ((type != SMB_ACL_TYPE_ACCESS) && (type != SMB_ACL_TYPE_DEFAULT))
{
DEBUG(10, ("invalid acl type given: %d\n", type));
errno = EINVAL;
if (!_IS_OF_TYPE(add_acl[i], type)) {
continue;
}
- ADD_TO_ARRAY(NULL, HPUX_ACE_T, add_acl[i],
+ ADD_TO_ARRAY(NULL, HPUX_ACE_T, add_acl[i],
hpux_acl, count);
if (hpux_acl == NULL) {
DEBUG(10, ("error enlarging acl.\n"));
}
-/*
+/*
* sort the ACL and check it for validity
*
* [original comment from lib/sysacls.c:]
- *
+ *
* if it's a minimal ACL with only 4 entries then we
* need to recalculate the mask permissions to make
* sure that they are the same as the GROUP_OBJ
* structures.
* Inputs:
*
- * acl_count - Count of ACLs in the array of ACL strucutres.
+ * acl_count - Count of ACLs in the array of ACL structures.
* aclp - Array of ACL structures.
* acl_type_count - Pointer to acl_types structure. Should already be
* allocated.
- * Output:
+ * Output:
*
- * acl_type_count - This structure is filled up with counts of various
+ * acl_type_count - This structure is filled up with counts of various
* acl types.
*/
for(i=0;i<acl_count;i++) {
switch(aclp[i].a_type) {
- case USER:
+ case USER:
acl_type_count->n_user++;
break;
- case USER_OBJ:
+ case USER_OBJ:
acl_type_count->n_user_obj++;
break;
- case DEF_USER_OBJ:
+ case DEF_USER_OBJ:
acl_type_count->n_def_user_obj++;
break;
- case GROUP:
+ case GROUP:
acl_type_count->n_group++;
break;
- case GROUP_OBJ:
+ case GROUP_OBJ:
acl_type_count->n_group_obj++;
break;
- case DEF_GROUP_OBJ:
+ case DEF_GROUP_OBJ:
acl_type_count->n_def_group_obj++;
break;
- case OTHER_OBJ:
+ case OTHER_OBJ:
acl_type_count->n_other_obj++;
break;
- case DEF_OTHER_OBJ:
+ case DEF_OTHER_OBJ:
acl_type_count->n_def_other_obj++;
break;
case CLASS_OBJ:
case DEF_GROUP:
acl_type_count->n_def_group++;
break;
- default:
+ default:
acl_type_count->n_illegal_obj++;
break;
}
}
}
-/* hpux_swap_acl_entries: Swaps two ACL entries.
+/* hpux_swap_acl_entries: Swaps two ACL entries.
*
* Inputs: aclp0, aclp1 - ACL entries to be swapped.
*/
}
/* hpux_prohibited_duplicate_type
- * Identifies if given ACL type can have duplicate entries or
+ * Identifies if given ACL type can have duplicate entries or
* not.
*
* Inputs: acl_type - ACL Type.
*
- * Outputs:
+ * Outputs:
*
- * Return..
+ * Return..
*
* True - If the ACL type matches any of the prohibited types.
* False - If the ACL type doesn't match any of the prohibited types.
- */
+ */
static bool hpux_prohibited_duplicate_type(int acl_type)
{
switch(acl_type) {
case USER:
case GROUP:
- case DEF_USER:
+ case DEF_USER:
case DEF_GROUP:
return True;
default:
/* hpux_get_needed_class_perm
* Returns the permissions of a ACL structure only if the ACL
- * type matches one of the pre-determined types for computing
+ * type matches one of the pre-determined types for computing
* CLASS_OBJ permissions.
*
* Inputs: aclp - Pointer to ACL structure.
static int hpux_get_needed_class_perm(struct acl *aclp)
{
switch(aclp->a_type) {
- case USER:
- case GROUP_OBJ:
- case GROUP:
- case DEF_USER_OBJ:
+ case USER:
+ case GROUP_OBJ:
+ case GROUP:
+ case DEF_USER_OBJ:
case DEF_USER:
- case DEF_GROUP_OBJ:
+ case DEF_GROUP_OBJ:
case DEF_GROUP:
case DEF_CLASS_OBJ:
- case DEF_OTHER_OBJ:
+ case DEF_OTHER_OBJ:
return aclp->a_perm;
- default:
+ default:
return 0;
}
}
hpux_count_obj(acl_count, aclp, &acl_obj_count);
- /* There should be only one entry each of type USER_OBJ, GROUP_OBJ,
- * CLASS_OBJ and OTHER_OBJ
+ /* There should be only one entry each of type USER_OBJ, GROUP_OBJ,
+ * CLASS_OBJ and OTHER_OBJ
*/
- if ( (acl_obj_count.n_user_obj != 1) ||
- (acl_obj_count.n_group_obj != 1) ||
+ if ( (acl_obj_count.n_user_obj != 1) ||
+ (acl_obj_count.n_group_obj != 1) ||
(acl_obj_count.n_class_obj != 1) ||
- (acl_obj_count.n_other_obj != 1) )
+ (acl_obj_count.n_other_obj != 1) )
{
DEBUG(0,("hpux_internal_aclsort: More than one entry or no entries for \
USER OBJ or GROUP_OBJ or OTHER_OBJ or CLASS_OBJ\n"));
* one of them each.
*/
- if ( (acl_obj_count.n_def_user_obj > 1) ||
- (acl_obj_count.n_def_group_obj > 1) ||
- (acl_obj_count.n_def_other_obj > 1) ||
- (acl_obj_count.n_def_class_obj > 1) )
+ if ( (acl_obj_count.n_def_user_obj > 1) ||
+ (acl_obj_count.n_def_group_obj > 1) ||
+ (acl_obj_count.n_def_other_obj > 1) ||
+ (acl_obj_count.n_def_class_obj > 1) )
{
DEBUG(0,("hpux_internal_aclsort: More than one entry for DEF_CLASS_OBJ \
or DEF_USER_OBJ or DEF_GROUP_OBJ or DEF_OTHER_OBJ\n"));
return -1;
}
- /* We now have proper number of OBJ and DEF_OBJ entries. Now sort the acl
- * structures.
+ /* We now have proper number of OBJ and DEF_OBJ entries. Now sort the acl
+ * structures.
*
* Sorting crieteria - First sort by ACL type. If there are multiple entries of
* same ACL type, sort by ACL id.
*
- * I am using the trival kind of sorting method here because, performance isn't
+ * I am using the trivial kind of sorting method here because, performance isn't
* really effected by the ACLs feature. More over there aren't going to be more
- * than 17 entries on HPUX.
+ * than 17 entries on HPUX.
*/
for(i=0; i<acl_count;i++) {
}
-/*
+/*
* hpux_acl_call_present:
*
* This checks if the POSIX ACL system call is defined
* higher is installed. If acl() was called when it
* isn't defined, it causes the process to core dump
* so it is important to check this and avoid acl()
- * calls if it isn't there.
+ * calls if it isn't there.
*/
static bool hpux_acl_call_present(void)
return True;
}
-/*
- * runtime check for presence of aclsort library call.
+/*
+ * runtime check for presence of aclsort library call.
* same code as for acl call. if there are more of these,
* a dispatcher function could be handy...
*/
-static bool hpux_aclsort_call_present(void)
+static bool hpux_aclsort_call_present(void)
{
shl_t handle = NULL;
void *value;
ret_val = shl_findsym(&handle, "aclsort", TYPE_PROCEDURE, &value);
if (ret_val != 0) {
DEBUG(5, ("hpux_aclsort_call_present: shl_findsym "
- "returned %d, errno = %d, error %s",
+ "returned %d, errno = %d, error %s",
ret_val, errno, strerror(errno)));
DEBUG(5, ("hpux_aclsort_call_present: "
"aclsort() function not available.\n"));
DEBUGADD(10, (" - which: %d\n", check_which));
if (check_which != -1) {
DEBUGADD(10, (" - invalid entry:\n"));
- DEBUGADD(10, (" * type: %d:\n",
+ DEBUGADD(10, (" * type: %d:\n",
hpux_acl[check_which].a_type));
DEBUGADD(10, (" * id: %d\n",
hpux_acl[check_which].a_id));
/* VFS operations structure */
static struct vfs_fn_pointers hpuxacl_fns = {
- .sys_acl_get_file_fn = hpuxacl_sys_acl_get_file,
.sys_acl_get_fd_fn = hpuxacl_sys_acl_get_fd,
- .sys_acl_blob_get_file_fn = posix_sys_acl_blob_get_file,
.sys_acl_blob_get_fd_fn = posix_sys_acl_blob_get_fd,
- .sys_acl_set_file_fn = hpuxacl_sys_acl_set_file,
- .sys_acl_set_fd_fn = hpuxacl_sys_acl_set_fd,
- .sys_acl_delete_def_file_fn = hpuxacl_sys_acl_delete_def_file,
+ sys_acl_set_fd_fn = hpuxacl_sys_acl_set_fd,
+ .sys_acl_delete_def_fd_fn = hpuxacl_sys_acl_delete_def_fd,
};
-NTSTATUS vfs_hpuxacl_init(void)
+static_decl_vfs;
+NTSTATUS vfs_hpuxacl_init(TALLOC_CTX *ctx)
{
return smb_register_vfs(SMB_VFS_INTERFACE_VERSION, "hpuxacl",
&hpuxacl_fns);