1 # The input file that configure uses to create the Makefile for rsync.
4 datarootdir=@datarootdir@
5 exec_prefix=@exec_prefix@
32 SIMD_x86_64=simd-checksum-x86_64.o
33 ASM_x86_64=lib/md5-asm-x86_64.o
35 GENFILES=configure.sh aclocal.m4 config.h.in proto.h proto.h-tstamp rsync.1 rsync.1.html \
36 rsync-ssl.1 rsync-ssl.1.html rsyncd.conf.5 rsyncd.conf.5.html
37 HEADERS=byteorder.h config.h errcode.h proto.h rsync.h ifuncs.h itypes.h inums.h \
38 lib/pool_alloc.h lib/mdigest.h lib/md-defines.h version.h
39 LIBOBJ=lib/wildmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o lib/md5.o \
40 lib/permstring.o lib/pool_alloc.o lib/sysacls.o lib/sysxattrs.o @LIBOBJS@
41 zlib_OBJS=zlib/deflate.o zlib/inffast.o zlib/inflate.o zlib/inftrees.o \
42 zlib/trees.o zlib/zutil.o zlib/adler32.o zlib/compress.o zlib/crc32.o
43 OBJS1=flist.o rsync.o generator.o receiver.o cleanup.o sender.o exclude.o \
44 util.o util2.o main.o checksum.o match.o syscall.o log.o backup.o delete.o
45 OBJS2=options.o io.o compat.o hlink.o token.o uidlist.o socket.o hashtable.o \
46 fileio.o batch.o clientname.o chmod.o acls.o xattrs.o
47 OBJS3=progress.o pipe.o @ASM@
48 DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
49 popt_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
50 popt/popthelp.o popt/poptparse.o
51 OBJS=$(OBJS1) $(OBJS2) $(OBJS3) @SIMD@ $(DAEMON_OBJ) $(LIBOBJ) @BUILD_ZLIB@ @BUILD_POPT@
53 TLS_OBJ = tls.o syscall.o t_stub.o lib/compat.o lib/snprintf.o lib/permstring.o lib/sysxattrs.o @BUILD_POPT@
55 # Programs we must have to run the test cases
56 CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) getfsdev$(EXEEXT) \
57 testrun$(EXEEXT) trimslash$(EXEEXT) t_unsafe$(EXEEXT) wildtest$(EXEEXT)
59 CHECK_SYMLINKS = testsuite/chown-fake.test testsuite/devices-fake.test testsuite/xattrs-hlink.test
61 # Objects for CHECK_PROGS to clean
62 CHECK_OBJS=tls.o testrun.o getgroups.o getfsdev.o t_stub.o t_unsafe.o trimslash.o wildtest.o
64 # note that the -I. is needed to handle config.h when using VPATH
67 $(CC) -I. -I$(srcdir) $(CFLAGS) $(CPPFLAGS) -c $< @CC_SHOBJ_FLAG@
71 all: Makefile rsync$(EXEEXT) stunnel-rsyncd.conf @MAKE_MAN@
75 -${MKDIR_P} ${DESTDIR}${bindir}
76 ${INSTALLCMD} ${INSTALL_STRIP} -m 755 rsync$(EXEEXT) ${DESTDIR}${bindir}
77 ${INSTALLCMD} -m 755 $(srcdir)/rsync-ssl ${DESTDIR}${bindir}
78 -${MKDIR_P} ${DESTDIR}${mandir}/man1
79 -${MKDIR_P} ${DESTDIR}${mandir}/man5
80 if test -f rsync.1; then ${INSTALLMAN} -m 644 rsync.1 ${DESTDIR}${mandir}/man1; fi
81 if test -f rsync-ssl.1; then ${INSTALLMAN} -m 644 rsync-ssl.1 ${DESTDIR}${mandir}/man1; fi
82 if test -f rsyncd.conf.5; then ${INSTALLMAN} -m 644 rsyncd.conf.5 ${DESTDIR}${mandir}/man5; fi
84 install-ssl-daemon: stunnel-rsyncd.conf
85 -${MKDIR_P} ${DESTDIR}/etc/stunnel
86 ${INSTALLCMD} -m 644 stunnel-rsyncd.conf ${DESTDIR}/etc/stunnel/rsyncd.conf
87 @if ! ls /etc/rsync-ssl/certs/server.* >/dev/null 2>/dev/null; then \
88 echo "Note that you'll need to install the certificate used by /etc/stunnel/rsyncd.conf"; \
91 install-all: install install-ssl-client install-ssl-daemon
94 $(MAKE) INSTALL_STRIP='-s' install
96 rsync$(EXEEXT): $(OBJS)
97 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
100 $(CHECK_OBJS): $(HEADERS)
101 tls.o xattrs.o: lib/sysxattrs.h
102 options.o: latest-year.h help-rsync.h help-rsyncd.h
103 exclude.o: default-cvsignore.h
104 loadparm.o: default-dont-compress.h
108 default-cvsignore.h default-dont-compress.h: rsync.1.md define-from-md.awk
109 $(AWK) -f $(srcdir)/define-from-md.awk -v hfile=$@ $(srcdir)/rsync.1.md
111 help-rsync.h help-rsyncd.h: rsync.1.md help-from-md.awk
112 $(AWK) -f $(srcdir)/help-from-md.awk -v hfile=$@ $(srcdir)/rsync.1.md
114 rounding.h: rounding.c rsync.h proto.h
115 @for r in 0 1 3; do \
116 if $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) -o rounding -DEXTRA_ROUNDING=$$r -I. $(srcdir)/rounding.c >rounding.out 2>&1; then \
117 echo "#define EXTRA_ROUNDING $$r" >rounding.h; \
118 if test -f "$$HOME/build_farm/build_test.fns"; then \
119 echo "EXTRA_ROUNDING is $$r" >&2; \
125 @if test -f rounding.h; then : ; else \
126 cat rounding.out 1>&2; \
127 echo "Failed to create rounding.h!" 1>&2; \
132 simd-checksum-x86_64.o: simd-checksum-x86_64.cpp
133 @$(srcdir)/cmdormsg disable-simd $(CXX) -I. $(CXXFLAGS) $(CPPFLAGS) -c -o $@ $(srcdir)/simd-checksum-x86_64.cpp
135 lib/md5-asm-x86_64.o: lib/md5-asm-x86_64.S config.h lib/md-defines.h
136 @$(srcdir)/cmdormsg disable-asm $(CC) -I. @NOEXECSTACK@ -c -o $@ $(srcdir)/lib/md5-asm-x86_64.S
138 tls$(EXEEXT): $(TLS_OBJ)
139 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)
141 testrun$(EXEEXT): testrun.o
142 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ testrun.o
144 getgroups$(EXEEXT): getgroups.o
145 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)
147 getfsdev$(EXEEXT): getfsdev.o
148 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ getfsdev.o $(LIBS)
150 TRIMSLASH_OBJ = trimslash.o syscall.o t_stub.o lib/compat.o lib/snprintf.o
151 trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
152 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)
154 T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o util2.o t_stub.o lib/compat.o lib/snprintf.o lib/wildmatch.o
155 t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
156 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)
159 conf: configure.sh config.h.in
162 gen: conf proto.h man
166 rsync -aic $(GENFILES) $${SAMBA_HOST-samba.org}:/home/ftp/pub/rsync/generated-files/
168 aclocal.m4: $(srcdir)/m4/*.m4
169 aclocal -I $(srcdir)/m4
171 configure.sh config.h.in: configure.ac aclocal.m4
172 @test -f "$(srcdir)/configure.sh" && cp -p "$(srcdir)/configure.sh" configure.sh.old || touch configure.sh.old
173 @test -f "$(srcdir)/config.h.in" && cp -p "$(srcdir)/config.h.in" config.h.in.old || touch config.h.in.old
174 (cd "$(srcdir)" && autoconf -o configure.sh && autoheader && touch config.h.in)
175 @if diff "$(srcdir)/configure.sh" configure.sh.old >/dev/null 2>&1; then \
176 echo "configure.sh is unchanged."; \
177 rm configure.sh.old; \
179 echo "configure.sh has CHANGED."; \
181 @if diff "$(srcdir)/config.h.in" config.h.in.old >/dev/null 2>&1; then \
182 echo "config.h.in is unchanged."; \
183 rm config.h.in.old; \
185 echo "config.h.in has CHANGED."; \
187 @if test -f configure.sh.old -o -f config.h.in.old; then \
188 if test "$(MAKECMDGOALS)" = reconfigure; then \
189 echo 'Continuing with "make reconfigure".'; \
191 echo 'You may need to run:'; \
192 echo ' make reconfigure'; \
198 reconfigure: configure.sh
199 ./config.status --recheck
206 Makefile: Makefile.in config.status configure.sh config.h.in
207 @if test -f Makefile; then cp -p Makefile Makefile.old; else touch Makefile.old; fi
209 @if diff Makefile Makefile.old >/dev/null 2>&1; then \
210 echo "Makefile is unchanged."; \
213 if test "$(MAKECMDGOALS)" = reconfigure; then \
214 echo 'Continuing with "make reconfigure".'; \
216 echo "Makefile updated -- rerun your make command."; \
221 stunnel-rsyncd.conf: $(srcdir)/stunnel-rsyncd.conf.in Makefile
222 sed 's;\@bindir\@;$(bindir);g' <$(srcdir)/stunnel-rsyncd.conf.in >stunnel-rsyncd.conf
225 proto: proto.h-tstamp
227 proto.h: proto.h-tstamp
228 @if test -f proto.h; then :; else cp -p $(srcdir)/proto.h .; fi
230 proto.h-tstamp: $(srcdir)/*.c $(srcdir)/lib/compat.c config.h
231 $(AWK) -f $(srcdir)/mkproto.awk $(srcdir)/*.c $(srcdir)/lib/compat.c
234 man: rsync.1 rsync-ssl.1 rsyncd.conf.5
236 rsync.1: rsync.1.md md2man version.h Makefile
237 @$(srcdir)/maybe-make-man $(srcdir) rsync.1.md
239 rsync-ssl.1: rsync-ssl.1.md md2man version.h Makefile
240 @$(srcdir)/maybe-make-man $(srcdir) rsync-ssl.1.md
242 rsyncd.conf.5: rsyncd.conf.5.md md2man version.h Makefile
243 @$(srcdir)/maybe-make-man $(srcdir) rsyncd.conf.5.md
247 rm -f *~ $(OBJS) $(CHECK_PROGS) $(CHECK_OBJS) $(CHECK_SYMLINKS) \
248 rounding rounding.h *.old rsync*.1 rsync*.5 rsync*.html
254 # We try to delete built files from both the source and build
255 # directories, just in case somebody previously configured things in
256 # the source directory.
259 rm -f Makefile config.h config.status
260 rm -f stunnel-rsyncd.conf
261 rm -f lib/dummy popt/dummy zlib/dummy
262 rm -f $(srcdir)/Makefile $(srcdir)/config.h $(srcdir)/config.status
263 rm -f $(srcdir)/lib/dummy $(srcdir)/popt/dummy $(srcdir)/zlib/dummy
264 rm -f config.cache config.log
265 rm -f $(srcdir)/config.cache $(srcdir)/config.log
266 rm -f shconfig $(srcdir)/shconfig
268 rm -rf autom4te.cache
270 # this target is really just for my use. It only works on a limited
271 # range of machines and is used to produce a list of potentially
272 # dead (ie. unused) functions in the code. (tridge)
275 nm *.o */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
276 nm *.o */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
277 comm -13 nmused.txt nmfns.txt
279 # 'check' is the GNU name, 'test' is the name for everybody else :-)
283 # There seems to be no standard way to specify some variables as
284 # exported from a Makefile apart from listing them like this.
286 # This depends on building rsync; if we need any helper programs it
287 # should depend on them too.
289 # We try to run the scripts with POSIX mode on, in the hope that will
290 # catch Bash-isms earlier even if we're running on GNU. Of course, we
291 # might lose in the future where POSIX diverges from old sh.
294 check: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
295 rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh
298 check29: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
299 rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=29
302 check30: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
303 rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=30
305 wildtest.o: wildtest.c t_stub.o lib/wildmatch.c rsync.h config.h
306 wildtest$(EXEEXT): wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@
307 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@ $(LIBS)
309 testsuite/chown-fake.test:
310 ln -s chown.test $(srcdir)/testsuite/chown-fake.test
312 testsuite/devices-fake.test:
313 ln -s devices.test $(srcdir)/testsuite/devices-fake.test
315 testsuite/xattrs-hlink.test:
316 ln -s xattrs.test $(srcdir)/testsuite/xattrs-hlink.test
318 # This does *not* depend on building or installing: you can use it to
319 # check a version installed from a binary or some other source tree,
323 installcheck: $(CHECK_PROGS) $(CHECK_SYMLINKS)
324 POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync$(EXEEXT)" srcdir="$(srcdir)" $(srcdir)/runtests.sh
326 # TODO: Add 'dist' target; need to know which files will be included
328 # Run the SPLINT (Secure Programming Lint) tool. <www.splint.org>
331 splint +unixlib +gnuextensions -weak rsync.c
335 cd $(srcdir) && rm dox/html/* && doxygen
337 # for maintainers only
338 .PHONY: doxygen-upload
340 rsync -avzv $(srcdir)/dox/html/ --delete \
341 $${SAMBA_HOST-samba.org}:/home/httpd/html/rsync/doxygen/head/