selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13
  14 sub have_ads($) {
  15         my ($self) = @_;
  16         my $found_ads = 0;
  17         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  18         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  19
  20         while (<IN>) {
  21                 if (/WITH_ADS/) {
  22                        $found_ads = 1;
  23                 }
  24         }
  25         close IN;
  26
  27         # If we were not built with ADS support, pretend we were never even available
  28         print "smbd does not have ADS support\n" unless $found_ads;
  29         return $found_ads;
  30 }
  31
  32 # return smb.conf parameters applicable to @path, based on the underlying
  33 # filesystem type
  34 sub get_fs_specific_conf($$)
  35 {
  36         my ($self, $path) = @_;
  37         my $mods = "";
  38         my $stat_out = `stat --file-system $path` or return "";
  39
  40         if ($stat_out =~ m/Type:\s+btrfs/) {
  41                 $mods .= "btrfs ";
  42         }
  43
  44         if ($mods) {
  45                 return "vfs objects = $mods";
  46         }
  47
  48         return undef;
  49 }
  50
  51 sub new($$) {
  52         my ($classname, $bindir, $srcdir, $server_maxtime) = @_;
  53         my $self = { vars => {},
  54                      bindir => $bindir,
  55                      srcdir => $srcdir,
  56                      server_maxtime => $server_maxtime
  57         };
  58         bless $self;
  59         return $self;
  60 }
  61
  62 sub teardown_env($$)
  63 {
  64         my ($self, $envvars) = @_;
  65         my $count = 0;
  66
  67         # This should cause smbd to terminate gracefully
  68         close($envvars->{STDIN_PIPE});
  69
  70         my $smbdpid = $envvars->{SMBD_TL_PID};
  71         my $nmbdpid = $envvars->{NMBD_TL_PID};
  72         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  73
  74         # This should give it time to write out the gcov data
  75         until ($count > 20) {
  76             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  77             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  78             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  79             if ($smbdchild == -1
  80                 && $nmbdchild == -1
  81                 && $winbinddchild == -1) {
  82                 last;
  83             }
  84             sleep(1);
  85             $count++;
  86         }
  87
  88         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  89             return;
  90         }
  91
  92         $self->stop_sig_term($smbdpid);
  93         $self->stop_sig_term($nmbdpid);
  94         $self->stop_sig_term($winbinddpid);
  95
  96         $count = 0;
  97         until ($count > 10) {
  98             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  99             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 100             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 101             if ($smbdchild == -1
 102                 && $nmbdchild == -1
 103                 && $winbinddchild == -1) {
 104                 last;
 105             }
 106             sleep(1);
 107             $count++;
 108         }
 109
 110         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 111             return;
 112         }
 113
 114         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 115         $self->stop_sig_kill($smbdpid);
 116         $self->stop_sig_kill($nmbdpid);
 117         $self->stop_sig_kill($winbinddpid);
 118
 119         return 0;
 120 }
 121
 122 sub getlog_env_app($$$)
 123 {
 124         my ($self, $envvars, $name) = @_;
 125
 126         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 127         my $out = $title;
 128
 129         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 130
 131         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 132         while (<LOG>) {
 133                 $out .= $_;
 134         }
 135         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 136         close(LOG);
 137
 138         return "" if $out eq $title;
 139
 140         return $out;
 141 }
 142
 143 sub getlog_env($$)
 144 {
 145         my ($self, $envvars) = @_;
 146         my $ret = "";
 147
 148         $ret .= $self->getlog_env_app($envvars, "SMBD");
 149         $ret .= $self->getlog_env_app($envvars, "NMBD");
 150         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 151
 152         return $ret;
 153 }
 154
 155 sub check_env($$)
 156 {
 157         my ($self, $envvars) = @_;
 158
 159         my $childpid = waitpid(-1, WNOHANG);
 160
 161         # TODO ...
 162         return 1;
 163 }
 164
 165 sub setup_env($$$)
 166 {
 167         my ($self, $envname, $path) = @_;
 168
 169         $ENV{ENVNAME} = $envname;
 170
 171         if (defined($self->{vars}->{$envname})) {
 172                 return $self->{vars}->{$envname};
 173         }
 174
 175         #
 176         # Avoid hitting system krb5.conf -
 177         # An env that needs Kerberos will reset this to the real
 178         # value.
 179         #
 180         $ENV{KRB5_CONFIG} = "$path/no_krb5.conf";
 181
 182         if ($envname eq "nt4_dc") {
 183                 return $self->setup_nt4_dc("$path/nt4_dc");
 184         } elsif ($envname eq "nt4_dc_schannel") {
 185                 return $self->setup_nt4_dc_schannel("$path/nt4_dc_schannel");
 186         } elsif ($envname eq "simpleserver") {
 187                 return $self->setup_simpleserver("$path/simpleserver");
 188         } elsif ($envname eq "fileserver") {
 189                 return $self->setup_fileserver("$path/fileserver");
 190         } elsif ($envname eq "maptoguest") {
 191                 return $self->setup_maptoguest("$path/maptoguest");
 192         } elsif ($envname eq "ktest") {
 193                 return $self->setup_ktest("$path/ktest");
 194         } elsif ($envname eq "nt4_member") {
 195                 if (not defined($self->{vars}->{nt4_dc})) {
 196                         if (not defined($self->setup_nt4_dc("$path/nt4_dc"))) {
 197                                 return undef;
 198                         }
 199                 }
 200                 return $self->setup_nt4_member("$path/nt4_member", $self->{vars}->{nt4_dc});
 201         } else {
 202                 return "UNKNOWN";
 203         }
 204 }
 205
 206 sub setup_nt4_dc($$)
 207 {
 208         my ($self, $path) = @_;
 209
 210         print "PROVISIONING NT4 DC...";
 211
 212         my $nt4_dc_options = "
 213         domain master = yes
 214         domain logons = yes
 215         lanman auth = yes
 216         raw NTLMv2 auth = yes
 217
 218         rpc_server:epmapper = external
 219         rpc_server:spoolss = external
 220         rpc_server:lsarpc = external
 221         rpc_server:samr = external
 222         rpc_server:netlogon = external
 223         rpc_server:register_embedded_np = yes
 224         rpc_server:FssagentRpc = external
 225
 226         rpc_daemon:epmd = fork
 227         rpc_daemon:spoolssd = fork
 228         rpc_daemon:lsasd = fork
 229         rpc_daemon:fssd = fork
 230         fss: sequence timeout = 1
 231 ";
 232
 233         my $vars = $self->provision($path,
 234                                     "LOCALNT4DC2",
 235                                     "localntdc2pass",
 236                                     $nt4_dc_options);
 237
 238         $vars or return undef;
 239
 240         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 241                return undef;
 242         }
 243
 244         $vars->{DC_SERVER} = $vars->{SERVER};
 245         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 246         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 247         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 248         $vars->{DC_USERNAME} = $vars->{USERNAME};
 249         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 250
 251         $self->{vars}->{nt4_dc} = $vars;
 252
 253         return $vars;
 254 }
 255
 256 sub setup_nt4_dc_schannel($$)
 257 {
 258         my ($self, $path) = @_;
 259
 260         print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
 261
 262         my $pdc_options = "
 263         domain master = yes
 264         domain logons = yes
 265         lanman auth = yes
 266
 267         rpc_server:epmapper = external
 268         rpc_server:spoolss = external
 269         rpc_server:lsarpc = external
 270         rpc_server:samr = external
 271         rpc_server:netlogon = external
 272         rpc_server:register_embedded_np = yes
 273
 274         rpc_daemon:epmd = fork
 275         rpc_daemon:spoolssd = fork
 276         rpc_daemon:lsasd = fork
 277
 278         server schannel = yes
 279 ";
 280
 281         my $vars = $self->provision($path,
 282                                     "LOCALNT4DC9",
 283                                     "localntdc9pass",
 284                                     $pdc_options);
 285
 286         $vars or return undef;
 287
 288         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 289                return undef;
 290         }
 291
 292         $vars->{DC_SERVER} = $vars->{SERVER};
 293         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 294         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 295         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 296         $vars->{DC_USERNAME} = $vars->{USERNAME};
 297         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 298
 299         $self->{vars}->{nt4_dc_schannel} = $vars;
 300
 301         return $vars;
 302 }
 303
 304 sub setup_nt4_member($$$)
 305 {
 306         my ($self, $prefix, $nt4_dc_vars) = @_;
 307         my $count = 0;
 308         my $rc;
 309
 310         print "PROVISIONING MEMBER...";
 311
 312         my $require_mutexes = "dbwrap_tdb_require_mutexes:* = yes";
 313         $require_mutexes = "" if ($ENV{SELFTEST_DONT_REQUIRE_TDB_MUTEX_SUPPORT} eq "1");
 314
 315         my $member_options = "
 316         security = domain
 317         dbwrap_tdb_mutexes:* = yes
 318         ${require_mutexes}
 319 ";
 320         my $ret = $self->provision($prefix,
 321                                    "LOCALNT4MEMBER3",
 322                                    "localnt4member3pass",
 323                                    $member_options);
 324
 325         $ret or return undef;
 326
 327         my $nmblookup = Samba::bindir_path($self, "nmblookup");
 328         do {
 329                 print "Waiting for the LOGON SERVER registration ...\n";
 330                 $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
 331                 if ($rc != 0) {
 332                         sleep(1);
 333                 }
 334                 $count++;
 335         } while ($rc != 0 && $count < 10);
 336         if ($count == 10) {
 337                 print "NMBD not reachable after 10 retries\n";
 338                 teardown_env($self, $ret);
 339                 return 0;
 340         }
 341
 342         my $net = Samba::bindir_path($self, "net");
 343         my $cmd = "";
 344         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 345         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 346         $cmd .= "$net join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
 347         $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
 348
 349         if (system($cmd) != 0) {
 350             warn("Join failed\n$cmd");
 351             return undef;
 352         }
 353
 354         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 355                return undef;
 356         }
 357
 358         $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
 359         $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
 360         $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
 361         $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
 362         $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
 363         $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
 364
 365         return $ret;
 366 }
 367
 368 sub setup_admember($$$$)
 369 {
 370         my ($self, $prefix, $dcvars) = @_;
 371
 372         # If we didn't build with ADS, pretend this env was never available
 373         if (not $self->have_ads()) {
 374                 return "UNKNOWN";
 375         }
 376
 377         print "PROVISIONING S3 AD MEMBER...";
 378
 379         my $member_options = "
 380         security = ads
 381         workgroup = $dcvars->{DOMAIN}
 382         realm = $dcvars->{REALM}
 383         netbios aliases = foo bar
 384 ";
 385
 386         my $ret = $self->provision($prefix,
 387                                    "LOCALADMEMBER",
 388                                    "loCalMemberPass",
 389                                    $member_options,
 390                                    $dcvars->{SERVER_IP},
 391                                    $dcvars->{SERVER_IPV6});
 392
 393         $ret or return undef;
 394
 395         close(USERMAP);
 396         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 397         $ret->{REALM} = $dcvars->{REALM};
 398
 399         my $ctx;
 400         my $prefix_abs = abs_path($prefix);
 401         $ctx = {};
 402         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 403         $ctx->{domain} = $dcvars->{DOMAIN};
 404         $ctx->{realm} = $dcvars->{REALM};
 405         $ctx->{dnsname} = lc($dcvars->{REALM});
 406         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 407         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 408         Samba::mk_krb5_conf($ctx, "");
 409
 410         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 411
 412         my $net = Samba::bindir_path($self, "net");
 413         my $cmd = "";
 414         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 415         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 416                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 417         } else {
 418                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 419         }
 420         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 421         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 422         $cmd .= "$net join $ret->{CONFIGURATION}";
 423         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 424
 425         if (system($cmd) != 0) {
 426             warn("Join failed\n$cmd");
 427             return undef;
 428         }
 429
 430         # We need world access to this share, as otherwise the domain
 431         # administrator from the AD domain provided by Samba4 can't
 432         # access the share for tests.
 433         chmod 0777, "$prefix/share";
 434
 435         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 436                 return undef;
 437         }
 438
 439         $ret->{DC_SERVER} = $dcvars->{SERVER};
 440         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 441         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 442         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 443         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 444         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 445
 446         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 447         $ret->{target} = $self;
 448
 449         return $ret;
 450 }
 451
 452 sub setup_admember_rfc2307($$$$)
 453 {
 454         my ($self, $prefix, $dcvars) = @_;
 455
 456         # If we didn't build with ADS, pretend this env was never available
 457         if (not $self->have_ads()) {
 458                 return "UNKNOWN";
 459         }
 460
 461         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 462
 463         my $member_options = "
 464         security = ads
 465         workgroup = $dcvars->{DOMAIN}
 466         realm = $dcvars->{REALM}
 467         idmap config * : backend = autorid
 468         idmap config * : range = 1000000-1999999
 469         idmap config * : rangesize = 100000
 470         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 471         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 472         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 473         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 474         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 475 ";
 476
 477         my $ret = $self->provision($prefix,
 478                                    "RFC2307MEMBER",
 479                                    "loCalMemberPass",
 480                                    $member_options,
 481                                    $dcvars->{SERVER_IP},
 482                                    $dcvars->{SERVER_IPV6});
 483
 484         $ret or return undef;
 485
 486         close(USERMAP);
 487         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 488         $ret->{REALM} = $dcvars->{REALM};
 489
 490         my $ctx;
 491         my $prefix_abs = abs_path($prefix);
 492         $ctx = {};
 493         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 494         $ctx->{domain} = $dcvars->{DOMAIN};
 495         $ctx->{realm} = $dcvars->{REALM};
 496         $ctx->{dnsname} = lc($dcvars->{REALM});
 497         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 498         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 499         Samba::mk_krb5_conf($ctx, "");
 500
 501         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 502
 503         my $net = Samba::bindir_path($self, "net");
 504         my $cmd = "";
 505         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 506         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 507                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 508         } else {
 509                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 510         }
 511         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 512         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 513         $cmd .= "$net join $ret->{CONFIGURATION}";
 514         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 515
 516         if (system($cmd) != 0) {
 517             warn("Join failed\n$cmd");
 518             return undef;
 519         }
 520
 521         # We need world access to this share, as otherwise the domain
 522         # administrator from the AD domain provided by Samba4 can't
 523         # access the share for tests.
 524         chmod 0777, "$prefix/share";
 525
 526         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 527                 return undef;
 528         }
 529
 530         $ret->{DC_SERVER} = $dcvars->{SERVER};
 531         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 532         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 533         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 534         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 535         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 536
 537         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 538         $ret->{target} = $self;
 539
 540         return $ret;
 541 }
 542
 543 sub setup_simpleserver($$)
 544 {
 545         my ($self, $path) = @_;
 546
 547         print "PROVISIONING simple server...";
 548
 549         my $prefix_abs = abs_path($path);
 550
 551         my $simpleserver_options = "
 552         lanman auth = yes
 553         vfs objects = xattr_tdb streams_depot time_audit full_audit
 554         change notify = no
 555
 556 [vfs_aio_fork]
 557         path = $prefix_abs/share
 558         vfs objects = aio_fork
 559         read only = no
 560         vfs_aio_fork:erratic_testing_mode=yes
 561
 562 [dosmode]
 563         path = $prefix_abs/share
 564         vfs objects =
 565         store dos attributes = yes
 566         hide files = /hidefile/
 567         hide dot files = yes
 568 ";
 569
 570         my $vars = $self->provision($path,
 571                                     "LOCALSHARE4",
 572                                     "local4pass",
 573                                     $simpleserver_options);
 574
 575         $vars or return undef;
 576
 577         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 578                return undef;
 579         }
 580
 581         $self->{vars}->{simpleserver} = $vars;
 582
 583         return $vars;
 584 }
 585
 586 sub setup_fileserver($$)
 587 {
 588         my ($self, $path) = @_;
 589         my $prefix_abs = abs_path($path);
 590         my $srcdir_abs = abs_path($self->{srcdir});
 591
 592         print "PROVISIONING file server ...\n";
 593
 594         my @dirs = ();
 595
 596         mkdir($prefix_abs, 0777);
 597
 598         my $share_dir="$prefix_abs/share";
 599
 600         # Create share directory structure
 601         my $lower_case_share_dir="$share_dir/lower-case";
 602         push(@dirs, $lower_case_share_dir);
 603
 604         my $lower_case_share_dir_30000="$share_dir/lower-case-30000";
 605         push(@dirs, $lower_case_share_dir_30000);
 606
 607         my $dfree_share_dir="$share_dir/dfree";
 608         push(@dirs, $dfree_share_dir);
 609         push(@dirs, "$dfree_share_dir/subdir1");
 610         push(@dirs, "$dfree_share_dir/subdir2");
 611
 612         my $valid_users_sharedir="$share_dir/valid_users";
 613         push(@dirs,$valid_users_sharedir);
 614
 615         my $offline_sharedir="$share_dir/offline";
 616         push(@dirs,$offline_sharedir);
 617
 618         my $force_user_valid_users_dir = "$share_dir/force_user_valid_users";
 619         push(@dirs, $force_user_valid_users_dir);
 620
 621         my $smbget_sharedir="$share_dir/smbget";
 622         push(@dirs,$smbget_sharedir);
 623
 624         my $fileserver_options = "
 625 [lowercase]
 626         path = $lower_case_share_dir
 627         comment = smb username is [%U]
 628         case sensitive = True
 629         default case = lower
 630         preserve case = no
 631         short preserve case = no
 632 [lowercase-30000]
 633         path = $lower_case_share_dir_30000
 634         comment = smb username is [%U]
 635         case sensitive = True
 636         default case = lower
 637         preserve case = no
 638         short preserve case = no
 639 [dfree]
 640         path = $dfree_share_dir
 641         comment = smb username is [%U]
 642         dfree command = $srcdir_abs/testprogs/blackbox/dfree.sh
 643 [valid-users-access]
 644         path = $valid_users_sharedir
 645         valid users = +userdup
 646 [offline]
 647         path = $offline_sharedir
 648         vfs objects = offline
 649
 650 # BUG: https://bugzilla.samba.org/show_bug.cgi?id=9878
 651 # RH BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1077651
 652 [force_user_valid_users]
 653         path = $force_user_valid_users_dir
 654         comment = force user with valid users combination test share
 655         valid users = +force_user
 656         force user = force_user
 657         force group = everyone
 658         write list = force_user
 659
 660 [smbget]
 661         path = $smbget_sharedir
 662         comment = smb username is [%U]
 663         guest ok = yes
 664 [ign_sysacls]
 665         path = $share_dir
 666         comment = ignore system acls
 667         acl_xattr:ignore system acls = yes
 668 ";
 669
 670         my $vars = $self->provision($path,
 671                                     "FILESERVER",
 672                                     "fileserver",
 673                                     $fileserver_options,
 674                                     undef,
 675                                     undef,
 676                                     1);
 677
 678         $vars or return undef;
 679
 680         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 681                return undef;
 682         }
 683
 684         $self->{vars}->{fileserver} = $vars;
 685
 686         mkdir($_, 0777) foreach(@dirs);
 687
 688         ## Create case sensitive lower case share dir
 689         foreach my $file ('a'..'z') {
 690                 my $full_path = $lower_case_share_dir . '/' . $file;
 691                 open my $fh, '>', $full_path;
 692                 # Add some content to file
 693                 print $fh $full_path;
 694                 close $fh;
 695         }
 696
 697         for (my $file = 1; $file < 51; ++$file) {
 698                 my $full_path = $lower_case_share_dir . '/' . $file;
 699                 open my $fh, '>', $full_path;
 700                 # Add some content to file
 701                 print $fh $full_path;
 702                 close $fh;
 703         }
 704
 705         # Create content for 30000 share
 706         foreach my $file ('a'..'z') {
 707                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 708                 open my $fh, '>', $full_path;
 709                 # Add some content to file
 710                 print $fh $full_path;
 711                 close $fh;
 712         }
 713
 714         for (my $file = 1; $file < 30001; ++$file) {
 715                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
 716                 open my $fh, '>', $full_path;
 717                 # Add some content to file
 718                 print $fh $full_path;
 719                 close $fh;
 720         }
 721
 722         ##
 723         ## create a listable file in valid_users_share
 724         ##
 725         my $valid_users_target = "$valid_users_sharedir/foo";
 726         unless (open(VALID_USERS_TARGET, ">$valid_users_target")) {
 727                 warn("Unable to open $valid_users_target");
 728                 return undef;
 729         }
 730         close(VALID_USERS_TARGET);
 731         chmod 0644, $valid_users_target;
 732
 733         return $vars;
 734 }
 735
 736 sub setup_ktest($$$)
 737 {
 738         my ($self, $prefix) = @_;
 739
 740         # If we didn't build with ADS, pretend this env was never available
 741         if (not $self->have_ads()) {
 742                 return "UNKNOWN";
 743         }
 744
 745         print "PROVISIONING server with security=ads...";
 746
 747         my $ktest_options = "
 748         workgroup = KTEST
 749         realm = ktest.samba.example.com
 750         security = ads
 751         username map = $prefix/lib/username.map
 752         server signing = required
 753 ";
 754
 755         my $ret = $self->provision($prefix,
 756                                    "LOCALKTEST6",
 757                                    "localktest6pass",
 758                                    $ktest_options);
 759
 760         $ret or return undef;
 761
 762         my $ctx;
 763         my $prefix_abs = abs_path($prefix);
 764         $ctx = {};
 765         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 766         $ctx->{domain} = "KTEST";
 767         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 768         $ctx->{dnsname} = lc($ctx->{realm});
 769         $ctx->{kdc_ipv4} = "0.0.0.0";
 770         $ctx->{kdc_ipv6} = "::";
 771         Samba::mk_krb5_conf($ctx, "");
 772
 773         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 774
 775         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 776         print USERMAP "
 777 $ret->{USERNAME} = KTEST\\Administrator
 778 ";
 779         close(USERMAP);
 780
 781 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 782 #Samba4 DC with the same parameters as are being used here.  The
 783 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 784
 785         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 786         chmod 0600, "$prefix/private/secrets.tdb";
 787
 788 #Make sure there's no old ntdb file.
 789         system("rm -f $prefix/private/secrets.ntdb");
 790
 791 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 792 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 793 #
 794 #and having in krb5.conf:
 795 # ticket_lifetime = 799718400
 796 # renew_lifetime = 799718400
 797 #
 798 # The commands for the -2 keytab where were:
 799 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 800 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 801 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 802 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 803 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 804 #
 805 # and then for the -3 keytab, I did
 806 #
 807 # net changetrustpw; kdestroy and the same again.
 808 #
 809 # This creates a credential cache with a very long lifetime (2036 at
 810 # at 2011-04), and shows that running 'net changetrustpw' does not
 811 # break existing logins (for the secrets.tdb method at least).
 812 #
 813
 814         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
 815
 816         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
 817         chmod 0600, "$prefix/krb5_ccache-2";
 818
 819         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
 820         chmod 0600, "$prefix/krb5_ccache-3";
 821
 822         # We need world access to this share, as otherwise the domain
 823         # administrator from the AD domain provided by ktest can't
 824         # access the share for tests.
 825         chmod 0777, "$prefix/share";
 826
 827         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
 828                return undef;
 829         }
 830         return $ret;
 831 }
 832
 833 sub setup_maptoguest($$)
 834 {
 835         my ($self, $path) = @_;
 836
 837         print "PROVISIONING maptoguest...";
 838
 839         my $options = "
 840 map to guest = bad user
 841 ";
 842
 843         my $vars = $self->provision($path,
 844                                     "maptoguest",
 845                                     "maptoguestpass",
 846                                     $options);
 847
 848         $vars or return undef;
 849
 850         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 851                return undef;
 852         }
 853
 854         $self->{vars}->{s3maptoguest} = $vars;
 855
 856         return $vars;
 857 }
 858
 859 sub stop_sig_term($$) {
 860         my ($self, $pid) = @_;
 861         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 862 }
 863
 864 sub stop_sig_kill($$) {
 865         my ($self, $pid) = @_;
 866         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 867 }
 868
 869 sub write_pid($$$)
 870 {
 871         my ($env_vars, $app, $pid) = @_;
 872
 873         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
 874         print PID $pid;
 875         close(PID);
 876 }
 877
 878 sub read_pid($$)
 879 {
 880         my ($env_vars, $app) = @_;
 881
 882         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
 883         my $pid = <PID>;
 884         close(PID);
 885         return $pid;
 886 }
 887
 888 sub check_or_start($$$$$) {
 889         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
 890
 891         # use a pipe for stdin in the child processes. This allows
 892         # those processes to monitor the pipe for EOF to ensure they
 893         # exit when the test script exits
 894         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
 895
 896         unlink($env_vars->{NMBD_TEST_LOG});
 897         print "STARTING NMBD...";
 898         my $pid = fork();
 899         if ($pid == 0) {
 900                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
 901                 open STDERR, '>&STDOUT';
 902
 903                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 904
 905                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 906                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 907                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 908
 909                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 910                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 911                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 912                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 913                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 914                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 915                 $ENV{UID_WRAPPER_ROOT} = "1";
 916
 917                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
 918
 919                 if ($nmbd ne "yes") {
 920                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 921                                 my $signame = shift;
 922                                 print("Skip nmbd received signal $signame");
 923                                 exit 0;
 924                         };
 925                         sleep($self->{server_maxtime});
 926                         exit 0;
 927                 }
 928
 929                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
 930                 my @optargs = ("-d0");
 931                 if (defined($ENV{NMBD_OPTIONS})) {
 932                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
 933                 }
 934                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 935                 if(defined($ENV{NMBD_VALGRIND})) {
 936                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
 937                 }
 938                 my @args = ("-F", "--no-process-group",
 939                             "-s", $env_vars->{SERVERCONFFILE},
 940                             "-l", $env_vars->{LOGDIR});
 941                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
 942                         push(@args, "--log-stdout");
 943                 }
 944
 945                 close($env_vars->{STDIN_PIPE});
 946                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 947
 948                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 949                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 950         }
 951         $env_vars->{NMBD_TL_PID} = $pid;
 952         write_pid($env_vars, "nmbd", $pid);
 953         print "DONE\n";
 954
 955         unlink($env_vars->{WINBINDD_TEST_LOG});
 956         print "STARTING WINBINDD...";
 957         $pid = fork();
 958         if ($pid == 0) {
 959                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
 960                 open STDERR, '>&STDOUT';
 961
 962                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 963
 964                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 965                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
 966                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 967
 968                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 969                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 970                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
 971                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
 972                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 973                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 974                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
 975                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
 976                 } else {
 977                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
 978                 }
 979                 $ENV{UID_WRAPPER_ROOT} = "1";
 980
 981                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
 982
 983                 if ($winbindd ne "yes") {
 984                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 985                                 my $signame = shift;
 986                                 print("Skip winbindd received signal $signame");
 987                                 exit 0;
 988                         };
 989                         sleep($self->{server_maxtime});
 990                         exit 0;
 991                 }
 992
 993                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
 994                 my @optargs = ("-d0");
 995                 if (defined($ENV{WINBINDD_OPTIONS})) {
 996                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
 997                 }
 998                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 999                 if(defined($ENV{WINBINDD_VALGRIND})) {
1000                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
1001                 }
1002                 my @args = ("-F", "--no-process-group",
1003                             "-s", $env_vars->{SERVERCONFFILE},
1004                             "-l", $env_vars->{LOGDIR});
1005                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
1006                         push(@args, "--stdout");
1007                 }
1008
1009                 close($env_vars->{STDIN_PIPE});
1010                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1011
1012                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1013                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1014         }
1015         $env_vars->{WINBINDD_TL_PID} = $pid;
1016         write_pid($env_vars, "winbindd", $pid);
1017         print "DONE\n";
1018
1019         unlink($env_vars->{SMBD_TEST_LOG});
1020         print "STARTING SMBD...";
1021         $pid = fork();
1022         if ($pid == 0) {
1023                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
1024                 open STDERR, '>&STDOUT';
1025
1026                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1027
1028                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1029                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1030                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1031
1032                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1033                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1034                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1035                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1036                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1037                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1038                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
1039                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
1040                 } else {
1041                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1042                 }
1043                 $ENV{UID_WRAPPER_ROOT} = "1";
1044
1045                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
1046
1047                 if ($smbd ne "yes") {
1048                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1049                                 my $signame = shift;
1050                                 print("Skip smbd received signal $signame");
1051                                 exit 0;
1052                         };
1053                         sleep($self->{server_maxtime});
1054                         exit 0;
1055                 }
1056
1057                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
1058                 my @optargs = ("-d0");
1059                 if (defined($ENV{SMBD_OPTIONS})) {
1060                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
1061                 }
1062                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1063                 if(defined($ENV{SMBD_VALGRIND})) {
1064                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
1065                 }
1066                 my @args = ("-F", "--no-process-group",
1067                             "-s", $env_vars->{SERVERCONFFILE},
1068                             "-l", $env_vars->{LOGDIR});
1069                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
1070                         push(@args, "--log-stdout");
1071                 }
1072
1073                 close($env_vars->{STDIN_PIPE});
1074                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1075
1076                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1077                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1078         }
1079         $env_vars->{SMBD_TL_PID} = $pid;
1080         write_pid($env_vars, "smbd", $pid);
1081         print "DONE\n";
1082
1083         close(STDIN_READER);
1084
1085         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
1086 }
1087
1088 sub createuser($$$$)
1089 {
1090         my ($self, $username, $password, $conffile) = @_;
1091         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $username > /dev/null";
1092         unless (open(PWD, "|$cmd")) {
1093             warn("Unable to set password for $username account\n$cmd");
1094             return undef;
1095         }
1096         print PWD "$password\n$password\n";
1097         unless (close(PWD)) {
1098             warn("Unable to set password for $username account\n$cmd");
1099             return undef;
1100         }
1101         print "DONE\n";
1102 }
1103
1104 sub provision($$$$$$$$)
1105 {
1106         my ($self, $prefix, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
1107
1108         ##
1109         ## setup the various environment variables we need
1110         ##
1111
1112         my $swiface = Samba::get_interface($server);
1113         my %ret = ();
1114         my $server_ip = "127.0.0.$swiface";
1115         my $server_ipv6 = sprintf("fd00:0000:0000:0000:0000:0000:5357:5f%02x", $swiface);
1116         my $domain = "SAMBA-TEST";
1117
1118         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
1119         chomp $unix_name;
1120         my $unix_uid = $>;
1121         my $unix_gids_str = $);
1122         my @unix_gids = split(" ", $unix_gids_str);
1123
1124         my $prefix_abs = abs_path($prefix);
1125         my $bindir_abs = abs_path($self->{bindir});
1126
1127         my @dirs = ();
1128
1129         my $shrdir="$prefix_abs/share";
1130         push(@dirs,$shrdir);
1131
1132         my $libdir="$prefix_abs/lib";
1133         push(@dirs,$libdir);
1134
1135         my $piddir="$prefix_abs/pid";
1136         push(@dirs,$piddir);
1137
1138         my $privatedir="$prefix_abs/private";
1139         push(@dirs,$privatedir);
1140
1141         my $lockdir="$prefix_abs/lockdir";
1142         push(@dirs,$lockdir);
1143
1144         my $eventlogdir="$prefix_abs/lockdir/eventlog";
1145         push(@dirs,$eventlogdir);
1146
1147         my $logdir="$prefix_abs/logs";
1148         push(@dirs,$logdir);
1149
1150         my $driver32dir="$shrdir/W32X86";
1151         push(@dirs,$driver32dir);
1152
1153         my $driver64dir="$shrdir/x64";
1154         push(@dirs,$driver64dir);
1155
1156         my $driver40dir="$shrdir/WIN40";
1157         push(@dirs,$driver40dir);
1158
1159         my $ro_shrdir="$shrdir/root-tmp";
1160         push(@dirs,$ro_shrdir);
1161
1162         my $msdfs_shrdir="$shrdir/msdfsshare";
1163         push(@dirs,$msdfs_shrdir);
1164
1165         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
1166         push(@dirs,$msdfs_deeppath);
1167
1168         my $badnames_shrdir="$shrdir/badnames";
1169         push(@dirs,$badnames_shrdir);
1170
1171         my $lease1_shrdir="$shrdir/SMB2_10";
1172         push(@dirs,$lease1_shrdir);
1173
1174         my $lease2_shrdir="$shrdir/SMB3_00";
1175         push(@dirs,$lease2_shrdir);
1176
1177         my $manglenames_shrdir="$shrdir/manglenames";
1178         push(@dirs,$manglenames_shrdir);
1179
1180         my $widelinks_shrdir="$shrdir/widelinks";
1181         push(@dirs,$widelinks_shrdir);
1182
1183         my $widelinks_linkdir="$shrdir/widelinks_foo";
1184         push(@dirs,$widelinks_linkdir);
1185
1186         my $shadow_tstdir="$shrdir/shadow";
1187         push(@dirs,$shadow_tstdir);
1188         my $shadow_mntdir="$shadow_tstdir/mount";
1189         push(@dirs,$shadow_mntdir);
1190         my $shadow_basedir="$shadow_mntdir/base";
1191         push(@dirs,$shadow_basedir);
1192         my $shadow_shrdir="$shadow_basedir/share";
1193         push(@dirs,$shadow_shrdir);
1194
1195         # this gets autocreated by winbindd
1196         my $wbsockdir="$prefix_abs/winbindd";
1197         my $wbsockprivdir="$lockdir/winbindd_privileged";
1198
1199         my $nmbdsockdir="$prefix_abs/nmbd";
1200         unlink($nmbdsockdir);
1201
1202         ##
1203         ## create the test directory layout
1204         ##
1205         die ("prefix_abs = ''") if $prefix_abs eq "";
1206         die ("prefix_abs = '/'") if $prefix_abs eq "/";
1207
1208         mkdir($prefix_abs, 0777);
1209         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
1210         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
1211             system("rm -rf $prefix_abs/*");
1212         }
1213         mkdir($_, 0777) foreach(@dirs);
1214
1215         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
1216
1217         ##
1218         ## lockdir and piddir must be 0755
1219         ##
1220         chmod 0755, $lockdir;
1221         chmod 0755, $piddir;
1222
1223
1224         ##
1225         ## create ro and msdfs share layout
1226         ##
1227
1228         chmod 0755, $ro_shrdir;
1229         my $unreadable_file = "$ro_shrdir/unreadable_file";
1230         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
1231                 warn("Unable to open $unreadable_file");
1232                 return undef;
1233         }
1234         close(UNREADABLE_FILE);
1235         chmod 0600, $unreadable_file;
1236
1237         my $msdfs_target = "$ro_shrdir/msdfs-target";
1238         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
1239                 warn("Unable to open $msdfs_target");
1240                 return undef;
1241         }
1242         close(MSDFS_TARGET);
1243         chmod 0666, $msdfs_target;
1244         symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
1245                 "$msdfs_shrdir/msdfs-src1";
1246         symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
1247
1248         ##
1249         ## create bad names in $badnames_shrdir
1250         ##
1251         ## (An invalid name, would be mangled to 8.3).
1252         my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
1253         unless (open(BADNAME_TARGET, ">$badname_target")) {
1254                 warn("Unable to open $badname_target");
1255                 return undef;
1256         }
1257         close(BADNAME_TARGET);
1258         chmod 0666, $badname_target;
1259
1260         ## (A bad name, would not be mangled to 8.3).
1261         my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
1262         unless (open(BADNAME_TARGET, ">$badname_target")) {
1263                 warn("Unable to open $badname_target");
1264                 return undef;
1265         }
1266         close(BADNAME_TARGET);
1267         chmod 0666, $badname_target;
1268
1269         ## (A bad good name).
1270         my $badname_target = "$badnames_shrdir/blank.txt";
1271         unless (open(BADNAME_TARGET, ">$badname_target")) {
1272                 warn("Unable to open $badname_target");
1273                 return undef;
1274         }
1275         close(BADNAME_TARGET);
1276         chmod 0666, $badname_target;
1277
1278         ##
1279         ## create mangleable directory names in $manglenames_shrdir
1280         ##
1281         my $manglename_target = "$manglenames_shrdir/foo:bar";
1282         mkdir($manglename_target, 0777);
1283
1284         ##
1285         ## create symlinks for widelinks tests.
1286         ##
1287         my $widelinks_target = "$widelinks_linkdir/target";
1288         unless (open(WIDELINKS_TARGET, ">$widelinks_target")) {
1289                 warn("Unable to open $widelinks_target");
1290                 return undef;
1291         }
1292         close(WIDELINKS_TARGET);
1293         chmod 0666, $widelinks_target;
1294         ##
1295         ## This link should get ACCESS_DENIED
1296         ##
1297         symlink "$widelinks_target", "$widelinks_shrdir/source";
1298         ##
1299         ## This link should be allowed
1300         ##
1301         symlink "$widelinks_shrdir", "$widelinks_shrdir/dot";
1302
1303         my $conffile="$libdir/server.conf";
1304         my $dfqconffile="$libdir/dfq.conf";
1305
1306         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
1307         my $nss_wrapper_passwd = "$privatedir/passwd";
1308         my $nss_wrapper_group = "$privatedir/group";
1309         my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
1310         my $resolv_conf = "$privatedir/resolv.conf";
1311         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
1312
1313         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
1314
1315         my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
1316
1317         my @eventlog_list = ("dns server", "application");
1318
1319         ##
1320         ## calculate uids and gids
1321         ##
1322
1323         my ($max_uid, $max_gid);
1324         my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2, $uid_userdup);
1325         my ($uid_pdbtest_wkn);
1326         my ($uid_smbget);
1327         my ($uid_force_user);
1328         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
1329         my ($gid_userdup, $gid_everyone);
1330         my ($gid_force_user);
1331
1332         if ($unix_uid < 0xffff - 7) {
1333                 $max_uid = 0xffff;
1334         } else {
1335                 $max_uid = $unix_uid;
1336         }
1337
1338         $uid_root = $max_uid - 1;
1339         $uid_nobody = $max_uid - 2;
1340         $uid_pdbtest = $max_uid - 3;
1341         $uid_pdbtest2 = $max_uid - 4;
1342         $uid_userdup = $max_uid - 5;
1343         $uid_pdbtest_wkn = $max_uid - 6;
1344         $uid_force_user = $max_uid - 7;
1345         $uid_smbget = $max_uid - 8;
1346
1347         if ($unix_gids[0] < 0xffff - 8) {
1348                 $max_gid = 0xffff;
1349         } else {
1350                 $max_gid = $unix_gids[0];
1351         }
1352
1353         $gid_nobody = $max_gid - 1;
1354         $gid_nogroup = $max_gid - 2;
1355         $gid_root = $max_gid - 3;
1356         $gid_domusers = $max_gid - 4;
1357         $gid_domadmins = $max_gid - 5;
1358         $gid_userdup = $max_gid - 6;
1359         $gid_everyone = $max_gid - 7;
1360         $gid_force_user = $max_gid - 8;
1361
1362         ##
1363         ## create conffile
1364         ##
1365
1366         unless (open(CONF, ">$conffile")) {
1367                 warn("Unable to open $conffile");
1368                 return undef;
1369         }
1370         print CONF "
1371 [global]
1372         netbios name = $server
1373         interfaces = $server_ip/8 $server_ipv6/64
1374         bind interfaces only = yes
1375         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1376         smbd:suicide mode = yes
1377
1378         workgroup = $domain
1379
1380         private dir = $privatedir
1381         pid directory = $piddir
1382         lock directory = $lockdir
1383         log file = $logdir/log.\%m
1384         log level = 1
1385         debug pid = yes
1386         max log size = 0
1387
1388         state directory = $lockdir
1389         cache directory = $lockdir
1390
1391         passdb backend = tdbsam
1392
1393         time server = yes
1394
1395         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1396         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
1397         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1398         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1399         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1400         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
1401         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1402
1403         addprinter command =            $mod_printer_pl -a -s $conffile --
1404         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1405
1406         eventlog list = application \"dns server\"
1407
1408         kernel oplocks = no
1409         kernel change notify = no
1410         smb2 leases = yes
1411
1412         logging = file
1413         printing = bsd
1414         printcap name = /dev/null
1415
1416         winbindd socket directory = $wbsockdir
1417         nmbd:socket dir = $nmbdsockdir
1418         idmap config * : range = 100000-200000
1419         winbind enum users = yes
1420         winbind enum groups = yes
1421         winbind separator = /
1422
1423 #       min receivefile size = 4000
1424
1425         read only = no
1426
1427         smbd:sharedelay = 100000
1428         smbd:writetimeupdatedelay = 500000
1429         map hidden = no
1430         map system = no
1431         map readonly = no
1432         store dos attributes = yes
1433         create mask = 755
1434         dos filemode = yes
1435         strict rename = yes
1436         strict sync = yes
1437         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
1438
1439         printing = vlp
1440         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1441         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1442         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1443         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1444         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1445         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1446         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1447         lpq cache time = 0
1448         print notify backchannel = yes
1449
1450         ncalrpc dir = $prefix_abs/ncalrpc
1451
1452         # The samba3.blackbox.smbclient_s3 test uses this to test that
1453         # sending messages works, and that the %m sub works.
1454         message command = mv %s $shrdir/message.%m
1455
1456         # fsrvp server requires registry shares
1457         registry shares = yes
1458
1459         # Used by RPC SRVSVC tests
1460         add share command = $bindir_abs/smbaddshare
1461         change share command = $bindir_abs/smbchangeshare
1462         delete share command = $bindir_abs/smbdeleteshare
1463
1464         # fruit:copyfile is a global option
1465         fruit:copyfile = yes
1466
1467         #this does not mean that we use non-secure test env,
1468         #it just means we ALLOW one to be configured.
1469         allow insecure wide links = yes
1470
1471         # Begin extra options
1472         $extra_options
1473         # End extra options
1474
1475         #Include user defined custom parameters if set
1476 ";
1477
1478         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1479                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1480         }
1481
1482         print CONF "
1483 [tmp]
1484         path = $shrdir
1485         comment = smb username is [%U]
1486 [tmpsort]
1487         path = $shrdir
1488         comment = Load dirsort module
1489         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1490 [tmpenc]
1491         path = $shrdir
1492         comment = encrypt smb username is [%U]
1493         smb encrypt = required
1494         vfs objects = dirsort
1495 [tmpguest]
1496         path = $shrdir
1497         guest ok = yes
1498 [guestonly]
1499         path = $shrdir
1500         guest only = yes
1501         guest ok = yes
1502 [forceuser]
1503         path = $shrdir
1504         force user = $unix_name
1505         guest ok = yes
1506 [forceuser_unixonly]
1507         comment = force a user with unix user SID and group SID
1508         path = $shrdir
1509         force user = pdbtest
1510         guest ok = yes
1511 [forceuser_wkngroup]
1512         comment = force a user with well-known group SID
1513         path = $shrdir
1514         force user = pdbtest_wkn
1515         guest ok = yes
1516 [forcegroup]
1517         path = $shrdir
1518         force group = nogroup
1519         guest ok = yes
1520 [ro-tmp]
1521         path = $ro_shrdir
1522         guest ok = yes
1523 [write-list-tmp]
1524         path = $shrdir
1525         read only = yes
1526         write list = $unix_name
1527 [valid-users-tmp]
1528         path = $shrdir
1529         valid users = $unix_name
1530         access based share enum = yes
1531 [msdfs-share]
1532         path = $msdfs_shrdir
1533         msdfs root = yes
1534         msdfs shuffle referrals = yes
1535         guest ok = yes
1536 [hideunread]
1537         copy = tmp
1538         hide unreadable = yes
1539 [tmpcase]
1540         copy = tmp
1541         case sensitive = yes
1542 [hideunwrite]
1543         copy = tmp
1544         hide unwriteable files = yes
1545 [durable]
1546         copy = tmp
1547         kernel share modes = no
1548         kernel oplocks = no
1549         posix locking = no
1550 [fs_specific]
1551         copy = tmp
1552         $fs_specific_conf
1553 [print1]
1554         copy = tmp
1555         printable = yes
1556
1557 [print2]
1558         copy = print1
1559 [print3]
1560         copy = print1
1561         default devmode = no
1562 [lp]
1563         copy = print1
1564
1565 [nfs4acl_simple]
1566         path = $shrdir
1567         comment = smb username is [%U]
1568         nfs4:mode = simple
1569         vfs objects = nfs4acl_xattr xattr_tdb
1570
1571 [nfs4acl_special]
1572         path = $shrdir
1573         comment = smb username is [%U]
1574         nfs4:mode = special
1575         vfs objects = nfs4acl_xattr xattr_tdb
1576
1577 [xcopy_share]
1578         path = $shrdir
1579         comment = smb username is [%U]
1580         create mask = 777
1581         force create mode = 777
1582 [posix_share]
1583         path = $shrdir
1584         comment = smb username is [%U]
1585         create mask = 0777
1586         force create mode = 0
1587         directory mask = 0777
1588         force directory mode = 0
1589         vfs objects = xattr_tdb
1590 [aio]
1591         copy = tmp
1592         aio read size = 1
1593         aio write size = 1
1594
1595 [print\$]
1596         copy = tmp
1597
1598 [vfs_fruit]
1599         path = $shrdir
1600         vfs objects = catia fruit streams_xattr acl_xattr
1601         ea support = yes
1602         fruit:ressource = file
1603         fruit:metadata = netatalk
1604         fruit:locking = netatalk
1605         fruit:encoding = native
1606
1607 [badname-tmp]
1608         path = $badnames_shrdir
1609         guest ok = yes
1610
1611 [manglenames_share]
1612         path = $manglenames_shrdir
1613         guest ok = yes
1614
1615 [dynamic_share]
1616         path = $shrdir/%R
1617         guest ok = yes
1618
1619 [widelinks_share]
1620         path = $widelinks_shrdir
1621         wide links = no
1622         guest ok = yes
1623
1624 [fsrvp_share]
1625         path = $shrdir
1626         comment = fake shapshots using rsync
1627         vfs objects = shell_snap shadow_copy2
1628         shell_snap:check path command = $fake_snap_pl --check
1629         shell_snap:create command = $fake_snap_pl --create
1630         shell_snap:delete command = $fake_snap_pl --delete
1631         # a relative path here fails, the snapshot dir is no longer found
1632         shadow:snapdir = $shrdir/.snapshots
1633
1634 [shadow1]
1635         path = $shadow_shrdir
1636         comment = previous versions snapshots under mount point
1637         vfs objects = shadow_copy2
1638         shadow:mountpoint = $shadow_mntdir
1639
1640 [shadow2]
1641         path = $shadow_shrdir
1642         comment = previous versions snapshots outside mount point
1643         vfs objects = shadow_copy2
1644         shadow:mountpoint = $shadow_mntdir
1645         shadow:snapdir = $shadow_tstdir/.snapshots
1646
1647 [shadow3]
1648         path = $shadow_shrdir
1649         comment = previous versions with subvolume snapshots, snapshots under base dir
1650         vfs objects = shadow_copy2
1651         shadow:mountpoint = $shadow_mntdir
1652         shadow:basedir = $shadow_basedir
1653         shadow:snapdir = $shadow_basedir/.snapshots
1654
1655 [shadow4]
1656         path = $shadow_shrdir
1657         comment = previous versions with subvolume snapshots, snapshots outside mount point
1658         vfs objects = shadow_copy2
1659         shadow:mountpoint = $shadow_mntdir
1660         shadow:basedir = $shadow_basedir
1661         shadow:snapdir = $shadow_tstdir/.snapshots
1662
1663 [shadow5]
1664         path = $shadow_shrdir
1665         comment = previous versions at volume root snapshots under mount point
1666         vfs objects = shadow_copy2
1667         shadow:mountpoint = $shadow_shrdir
1668
1669 [shadow6]
1670         path = $shadow_shrdir
1671         comment = previous versions at volume root snapshots outside mount point
1672         vfs objects = shadow_copy2
1673         shadow:mountpoint = $shadow_shrdir
1674         shadow:snapdir = $shadow_tstdir/.snapshots
1675
1676 [shadow7]
1677         path = $shadow_shrdir
1678         comment = previous versions snapshots everywhere
1679         vfs objects = shadow_copy2
1680         shadow:mountpoint = $shadow_mntdir
1681         shadow:snapdirseverywhere = yes
1682
1683 [shadow8]
1684         path = $shadow_shrdir
1685         comment = previous versions using snapsharepath
1686         vfs objects = shadow_copy2
1687         shadow:mountpoint = $shadow_mntdir
1688         shadow:snapdir = $shadow_tstdir/.snapshots
1689         shadow:snapsharepath = share
1690
1691 [shadow_wl]
1692         path = $shadow_shrdir
1693         comment = previous versions with wide links allowed
1694         vfs objects = shadow_copy2
1695         shadow:mountpoint = $shadow_mntdir
1696         wide links = yes
1697 [dfq]
1698         path = $shrdir/dfree
1699         vfs objects = fake_dfq
1700         admin users = $unix_name
1701         include = $dfqconffile
1702         ";
1703         close(CONF);
1704
1705         unless (open(DFQCONF, ">$dfqconffile")) {
1706                 warn("Unable to open $dfqconffile");
1707                 return undef;
1708         }
1709         close(DFQCONF);
1710
1711         ##
1712         ## create a test account
1713         ##
1714
1715         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
1716            warn("Unable to open $nss_wrapper_passwd");
1717            return undef;
1718         }
1719         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
1720 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
1721 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1722 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1723 userdup:x:$uid_userdup:$gid_userdup:userdup gecos:$prefix_abs:/bin/false
1724 pdbtest_wkn:x:$uid_pdbtest_wkn:$gid_everyone:pdbtest_wkn gecos:$prefix_abs:/bin/false
1725 force_user:x:$uid_force_user:$gid_force_user:force user gecos:$prefix_abs:/bin/false
1726 smbget_user:x:$uid_smbget:$gid_domusers:smbget_user gecos:$prefix_abs:/bin/false
1727 ";
1728         if ($unix_uid != 0) {
1729                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
1730 ";
1731         }
1732         close(PASSWD);
1733
1734         unless (open(GROUP, ">$nss_wrapper_group")) {
1735              warn("Unable to open $nss_wrapper_group");
1736              return undef;
1737         }
1738         print GROUP "nobody:x:$gid_nobody:
1739 nogroup:x:$gid_nogroup:nobody
1740 $unix_name-group:x:$unix_gids[0]:
1741 domusers:X:$gid_domusers:
1742 domadmins:X:$gid_domadmins:
1743 userdup:x:$gid_userdup:$unix_name
1744 everyone:x:$gid_everyone:
1745 force_user:x:$gid_force_user:
1746 ";
1747         if ($unix_gids[0] != 0) {
1748                 print GROUP "root:x:$gid_root:
1749 ";
1750         }
1751
1752         close(GROUP);
1753
1754         ## hosts
1755         my $hostname = lc($server);
1756         unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
1757                 warn("Unable to open $nss_wrapper_hosts");
1758                 return undef;
1759         }
1760         print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
1761         print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
1762         close(HOSTS);
1763
1764         ## hosts
1765         unless (open(RESOLV_CONF, ">$resolv_conf")) {
1766                 warn("Unable to open $resolv_conf");
1767                 return undef;
1768         }
1769         if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
1770                 if (defined($dc_server_ip)) {
1771                         print RESOLV_CONF "nameserver $dc_server_ip\n";
1772                 }
1773                 if (defined($dc_server_ipv6)) {
1774                         print RESOLV_CONF "nameserver $dc_server_ipv6\n";
1775                 }
1776         } else {
1777                 print RESOLV_CONF "nameserver ${server_ip}\n";
1778                 print RESOLV_CONF "nameserver ${server_ipv6}\n";
1779         }
1780         close(RESOLV_CONF);
1781
1782         foreach my $evlog (@eventlog_list) {
1783                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
1784                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
1785                 close(EVENTLOG);
1786         }
1787
1788         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1789         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1790         $ENV{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1791         $ENV{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1792         if ($ENV{SAMBA_DNS_FAKING}) {
1793                 $ENV{RESOLV_WRAPPER_CONF} = $resolv_conf;
1794         } else {
1795                 $ENV{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1796         }
1797
1798         createuser($self, $unix_name, $password, $conffile) || die("Unable to create user");
1799         createuser($self, "force_user", $password, $conffile) || die("Unable to create force_user");
1800         createuser($self, "smbget_user", $password, $conffile) || die("Unable to create smbget_user");
1801
1802         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
1803         print DNS_UPDATE_LIST "A $server. $server_ip\n";
1804         print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
1805         close(DNS_UPDATE_LIST);
1806
1807         $ret{SERVER_IP} = $server_ip;
1808         $ret{SERVER_IPV6} = $server_ipv6;
1809         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
1810         $ret{NMBD_TEST_LOG_POS} = 0;
1811         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
1812         $ret{WINBINDD_TEST_LOG_POS} = 0;
1813         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
1814         $ret{SMBD_TEST_LOG_POS} = 0;
1815         $ret{SERVERCONFFILE} = $conffile;
1816         $ret{CONFIGURATION} ="-s $conffile";
1817         $ret{SERVER} = $server;
1818         $ret{USERNAME} = $unix_name;
1819         $ret{USERID} = $unix_uid;
1820         $ret{DOMAIN} = $domain;
1821         $ret{NETBIOSNAME} = $server;
1822         $ret{PASSWORD} = $password;
1823         $ret{PIDDIR} = $piddir;
1824         $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
1825         $ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
1826         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
1827         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
1828         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1829         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1830         $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
1831         $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
1832         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
1833         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
1834         if ($ENV{SAMBA_DNS_FAKING}) {
1835                 $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
1836         } else {
1837                 $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
1838         }
1839         $ret{LOCAL_PATH} = "$shrdir";
1840         $ret{LOGDIR} = $logdir;
1841
1842         #
1843         # Avoid hitting system krb5.conf -
1844         # An env that needs Kerberos will reset this to the real
1845         # value.
1846         #
1847         $ret{KRB5_CONFIG} = abs_path($prefix) . "/no_krb5.conf";
1848
1849         return \%ret;
1850 }
1851
1852 sub wait_for_start($$$$$)
1853 {
1854         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
1855         my $ret;
1856
1857         if ($nmbd eq "yes") {
1858                 my $count = 0;
1859
1860                 # give time for nbt server to register its names
1861                 print "checking for nmbd\n";
1862
1863                 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
1864                 my $nmblookup = Samba::bindir_path($self, "nmblookup");
1865
1866                 do {
1867                         $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
1868                         if ($ret != 0) {
1869                                 sleep(1);
1870                         } else {
1871                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
1872                                 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
1873                                 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
1874                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
1875                         }
1876                         $count++;
1877                 } while ($ret != 0 && $count < 10);
1878                 if ($count == 10) {
1879                         print "NMBD not reachable after 10 retries\n";
1880                         teardown_env($self, $envvars);
1881                         return 0;
1882                 }
1883         }
1884
1885         if ($winbindd eq "yes") {
1886             print "checking for winbindd\n";
1887             my $count = 0;
1888             do {
1889                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --ping-dc");
1890                 if ($ret != 0) {
1891                     sleep(2);
1892                 }
1893                 $count++;
1894             } while ($ret != 0 && $count < 10);
1895             if ($count == 10) {
1896                 print "WINBINDD not reachable after 20 seconds\n";
1897                 teardown_env($self, $envvars);
1898                 return 0;
1899             }
1900         }
1901
1902         if ($smbd eq "yes") {
1903             # make sure smbd is also up set
1904             print "wait for smbd\n";
1905
1906             my $count = 0;
1907             do {
1908                 $ret = system(Samba::bindir_path($self, "smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
1909                 if ($ret != 0) {
1910                     sleep(2);
1911                 }
1912                 $count++
1913             } while ($ret != 0 && $count < 10);
1914             if ($count == 10) {
1915                 print "SMBD failed to start up in a reasonable time (20sec)\n";
1916                 teardown_env($self, $envvars);
1917                 return 0;
1918             }
1919         }
1920
1921         # Ensure we have domain users mapped.
1922         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
1923         if ($ret != 0) {
1924             return 1;
1925         }
1926         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
1927         if ($ret != 0) {
1928             return 1;
1929         }
1930         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add sid=S-1-1-0 unixgroup=everyone type=builtin");
1931         if ($ret != 0) {
1932             return 1;
1933         }
1934
1935         if ($winbindd eq "yes") {
1936             # note: creating builtin groups requires winbindd for the
1937             # unix id allocator
1938             $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
1939             if ($ret != 0) {
1940                 print "Failed to create BUILTIN\\Users group\n";
1941                 return 0;
1942             }
1943             my $count = 0;
1944             do {
1945                 system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache flush");
1946                 $ret = system("SELFTEST_WINBINDD_SOCKET_DIR=" . $envvars->{SELFTEST_WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
1947                 if ($ret != 0) {
1948                     sleep(2);
1949                 }
1950                 $count++;
1951             } while ($ret != 0 && $count < 10);
1952             if ($count == 10) {
1953                 print "WINBINDD not reachable after 20 seconds\n";
1954                 teardown_env($self, $envvars);
1955                 return 0;
1956             }
1957         }
1958
1959         print $self->getlog_env($envvars);
1960
1961         return 1;
1962 }
1963
1964 1;