selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13
  14 sub new($$) {
  15         my ($classname, $bindir, $binary_mapping, $srcdir, $exeext, $server_maxtime) = @_;
  16         $exeext = "" unless defined($exeext);
  17         my $self = { vars => {},
  18                      bindir => $bindir,
  19                      binary_mapping => $binary_mapping,
  20                      srcdir => $srcdir,
  21                      exeext => $exeext,
  22                      server_maxtime => $server_maxtime
  23         };
  24         bless $self;
  25         return $self;
  26 }
  27
  28 sub teardown_env($$)
  29 {
  30         my ($self, $envvars) = @_;
  31
  32         my $smbdpid = read_pid($envvars, "smbd");
  33         my $nmbdpid = read_pid($envvars, "nmbd");
  34         my $winbinddpid = read_pid($envvars, "winbindd");
  35
  36         $self->stop_sig_term($smbdpid);
  37         $self->stop_sig_term($nmbdpid);
  38         $self->stop_sig_term($winbinddpid);
  39
  40         sleep(2);
  41
  42         $self->stop_sig_kill($smbdpid);
  43         $self->stop_sig_kill($nmbdpid);
  44         $self->stop_sig_kill($winbinddpid);
  45
  46         return 0;
  47 }
  48
  49 sub getlog_env_app($$$)
  50 {
  51         my ($self, $envvars, $name) = @_;
  52
  53         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
  54         my $out = $title;
  55
  56         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
  57
  58         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
  59         while (<LOG>) {
  60                 $out .= $_;
  61         }
  62         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
  63         close(LOG);
  64
  65         return "" if $out eq $title;
  66
  67         return $out;
  68 }
  69
  70 sub getlog_env($$)
  71 {
  72         my ($self, $envvars) = @_;
  73         my $ret = "";
  74
  75         $ret .= $self->getlog_env_app($envvars, "SMBD");
  76         $ret .= $self->getlog_env_app($envvars, "NMBD");
  77         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
  78
  79         return $ret;
  80 }
  81
  82 sub check_env($$)
  83 {
  84         my ($self, $envvars) = @_;
  85
  86         # TODO ...
  87         return 1;
  88 }
  89
  90 sub setup_env($$$)
  91 {
  92         my ($self, $envname, $path) = @_;
  93
  94         if ($envname eq "s3dc") {
  95                 return $self->setup_s3dc("$path/s3dc");
  96         } elsif ($envname eq "secshare") {
  97                 return $self->setup_secshare("$path/secshare");
  98         } elsif ($envname eq "maptoguest") {
  99                 return $self->setup_maptoguest("$path/maptoguest");
 100         } elsif ($envname eq "ktest") {
 101                 return $self->setup_ktest("$path/ktest");
 102         } elsif ($envname eq "secserver") {
 103                 if (not defined($self->{vars}->{s3dc})) {
 104                         if (not defined($self->setup_s3dc("$path/s3dc"))) {
 105                                 return undef;
 106                         }
 107                 }
 108                 return $self->setup_secserver("$path/secserver", $self->{vars}->{s3dc});
 109         } elsif ($envname eq "member") {
 110                 if (not defined($self->{vars}->{s3dc})) {
 111                         if (not defined($self->setup_s3dc("$path/s3dc"))) {
 112                                 return undef;
 113                         }
 114                 }
 115                 return $self->setup_member("$path/member", $self->{vars}->{s3dc});
 116         } else {
 117                 return undef;
 118         }
 119 }
 120
 121 sub setup_s3dc($$)
 122 {
 123         my ($self, $path) = @_;
 124
 125         print "PROVISIONING S3DC...";
 126
 127         my $s3dc_options = "
 128         domain master = yes
 129         domain logons = yes
 130         lanman auth = yes
 131 ";
 132
 133         my $vars = $self->provision($path,
 134                                     "LOCALS3DC2",
 135                                     2,
 136                                     "locals3dc2pass",
 137                                     $s3dc_options);
 138
 139         $vars or return undef;
 140
 141         $self->check_or_start($vars,
 142                                "yes", "yes", "yes");
 143
 144         if (not $self->wait_for_start($vars)) {
 145                return undef;
 146         }
 147
 148         $vars->{DC_SERVER} = $vars->{SERVER};
 149         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 150         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 151         $vars->{DC_USERNAME} = $vars->{USERNAME};
 152         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 153
 154         $self->{vars}->{s3dc} = $vars;
 155
 156         return $vars;
 157 }
 158
 159 sub setup_member($$$)
 160 {
 161         my ($self, $prefix, $s3dcvars) = @_;
 162
 163         print "PROVISIONING MEMBER...";
 164
 165         my $member_options = "
 166         security = domain
 167         server signing = on
 168 ";
 169         my $ret = $self->provision($prefix,
 170                                    "LOCALMEMBER3",
 171                                    3,
 172                                    "localmember3pass",
 173                                    $member_options);
 174
 175         $ret or return undef;
 176
 177         my $net = Samba::bindir_path($self, "net");
 178         my $cmd = "";
 179         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 180         $cmd .= "$net join $ret->{CONFIGURATION} $s3dcvars->{DOMAIN} member";
 181         $cmd .= " -U$s3dcvars->{USERNAME}\%$s3dcvars->{PASSWORD}";
 182
 183         if (system($cmd) != 0) {
 184             warn("Join failed\n$cmd");
 185             return undef;
 186         }
 187
 188         $self->check_or_start($ret, "yes", "yes", "yes");
 189
 190         if (not $self->wait_for_start($ret)) {
 191                return undef;
 192         }
 193
 194         $ret->{DC_SERVER} = $s3dcvars->{SERVER};
 195         $ret->{DC_SERVER_IP} = $s3dcvars->{SERVER_IP};
 196         $ret->{DC_NETBIOSNAME} = $s3dcvars->{NETBIOSNAME};
 197         $ret->{DC_USERNAME} = $s3dcvars->{USERNAME};
 198         $ret->{DC_PASSWORD} = $s3dcvars->{PASSWORD};
 199
 200         return $ret;
 201 }
 202
 203 sub setup_admember($$$$)
 204 {
 205         my ($self, $prefix, $dcvars, $iface) = @_;
 206
 207         print "PROVISIONING S3 AD MEMBER$iface...";
 208
 209         my $member_options = "
 210         security = ads
 211         server signing = on
 212         workgroup = $dcvars->{DOMAIN}
 213         realm = $dcvars->{REALM}
 214 ";
 215
 216         my $ret = $self->provision($prefix,
 217                                    "LOCALADMEMBER$iface",
 218                                    $iface,
 219                                    "loCalMember${iface}Pass",
 220                                    $member_options);
 221
 222         $ret or return undef;
 223
 224         close(USERMAP);
 225         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 226         $ret->{REALM} = $dcvars->{REALM};
 227
 228         my $ctx;
 229         my $prefix_abs = abs_path($prefix);
 230         $ctx = {};
 231         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 232         $ctx->{domain} = $dcvars->{DOMAIN};
 233         $ctx->{realm} = $dcvars->{REALM};
 234         $ctx->{dnsname} = lc($dcvars->{REALM});
 235         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 236         Samba::mk_krb5_conf($ctx);
 237
 238         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 239
 240         my $net = Samba::bindir_path($self, "net");
 241         my $cmd = "";
 242         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 243         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 244         $cmd .= "$net join $ret->{CONFIGURATION}";
 245         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 246
 247         if (system($cmd) != 0) {
 248             warn("Join failed\n$cmd");
 249             return undef;
 250         }
 251
 252         # We need world access to this share, as otherwise the domain
 253         # administrator from the AD domain provided by Samba4 can't
 254         # access the share for tests.
 255         chmod 0777, "$prefix/share";
 256
 257         $self->check_or_start($ret,
 258                               "yes", "yes", "yes");
 259
 260         $self->wait_for_start($ret);
 261
 262         $ret->{DC_SERVER} = $dcvars->{SERVER};
 263         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 264         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 265         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 266         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 267
 268         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 269         $ret->{target} = $self;
 270
 271         return $ret;
 272 }
 273
 274 sub setup_plugin_s4_dc($$$$)
 275 {
 276         my ($self, $prefix, $dcvars, $iface) = @_;
 277
 278         print "PROVISIONING S4 PLUGIN AD DC$iface...";
 279
 280         my $plugin_s4_dc_options = "
 281         workgroup = $dcvars->{DOMAIN}
 282         realm = $dcvars->{REALM}
 283         security=ads
 284         passdb backend = samba4
 285         auth methods = guest samba4
 286         domain logons = yes
 287         rpc_server:epmapper = external
 288         rpc_server:tcpip = no
 289         rpc_server:lsass = external
 290         rpc_server:lsarpc = external
 291         rpc_server:netlogon = external
 292         rpc_server:samr = external
 293         server signing = on
 294 ";
 295
 296         my $ret = $self->provision($prefix,
 297                                    "plugindc",
 298                                    $iface,
 299                                    "pluGin${iface}Pass",
 300                                    $plugin_s4_dc_options, 1);
 301
 302         $ret or return undef;
 303
 304         close(USERMAP);
 305         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 306         $ret->{REALM} = $dcvars->{REALM};
 307         $ret->{KRB5_CONFIG} = $dcvars->{KRB5_CONFIG};
 308
 309         # We need world access to this share, as otherwise the domain
 310         # administrator from the AD domain provided by Samba4 can't
 311         # access the share for tests.
 312         chmod 0777, "$prefix/share";
 313
 314         $self->check_or_start($ret,
 315                               "no", "no", "yes");
 316
 317         $self->wait_for_start($ret);
 318
 319         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 320         $ret->{target} = $self;
 321
 322         return $ret;
 323 }
 324
 325 sub setup_secshare($$)
 326 {
 327         my ($self, $path) = @_;
 328
 329         print "PROVISIONING server with security=share...";
 330
 331         my $secshare_options = "
 332         security = share
 333         lanman auth = yes
 334 ";
 335
 336         my $vars = $self->provision($path,
 337                                     "LOCALSHARE4",
 338                                     4,
 339                                     "local4pass",
 340                                     $secshare_options);
 341
 342         $vars or return undef;
 343
 344         $self->check_or_start($vars, "yes", "no", "yes");
 345
 346         if (not $self->wait_for_start($vars)) {
 347                return undef;
 348         }
 349
 350         $self->{vars}->{secshare} = $vars;
 351
 352         return $vars;
 353 }
 354
 355 sub setup_secserver($$$)
 356 {
 357         my ($self, $prefix, $s3dcvars) = @_;
 358
 359         print "PROVISIONING server with security=server...";
 360
 361         my $secserver_options = "
 362         security = server
 363         password server = $s3dcvars->{SERVER_IP}
 364 ";
 365
 366         my $ret = $self->provision($prefix,
 367                                    "LOCALSERVER5",
 368                                    5,
 369                                    "localserver5pass",
 370                                    $secserver_options);
 371
 372         $ret or return undef;
 373
 374         $self->check_or_start($ret, "yes", "no", "yes");
 375
 376         if (not $self->wait_for_start($ret)) {
 377                return undef;
 378         }
 379
 380         $ret->{DC_SERVER} = $s3dcvars->{SERVER};
 381         $ret->{DC_SERVER_IP} = $s3dcvars->{SERVER_IP};
 382         $ret->{DC_NETBIOSNAME} = $s3dcvars->{NETBIOSNAME};
 383         $ret->{DC_USERNAME} = $s3dcvars->{USERNAME};
 384         $ret->{DC_PASSWORD} = $s3dcvars->{PASSWORD};
 385
 386         return $ret;
 387 }
 388
 389 sub setup_ktest($$$)
 390 {
 391         my ($self, $prefix) = @_;
 392
 393         print "PROVISIONING server with security=ads...";
 394
 395         my $ktest_options = "
 396         workgroup = KTEST
 397         realm = ktest.samba.example.com
 398         security = ads
 399         username map = $prefix/lib/username.map
 400 ";
 401
 402         my $ret = $self->provision($prefix,
 403                                    "LOCALKTEST6",
 404                                    6,
 405                                    "localktest6pass",
 406                                    $ktest_options);
 407
 408         $ret or return undef;
 409
 410         my $ctx;
 411         my $prefix_abs = abs_path($prefix);
 412         $ctx = {};
 413         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 414         $ctx->{domain} = "KTEST";
 415         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 416         $ctx->{dnsname} = lc($ctx->{realm});
 417         $ctx->{kdc_ipv4} = "0.0.0.0";
 418         Samba::mk_krb5_conf($ctx);
 419
 420         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 421
 422         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 423         print USERMAP "
 424 $ret->{USERNAME} = KTEST\\Administrator
 425 ";
 426         close(USERMAP);
 427
 428 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 429 #Samba4 DC with the same parameters as are being used here.  The
 430 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 431
 432         if (defined($ENV{BUILD_TDB2})) {
 433             system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb2 $prefix/private/secrets.tdb");
 434         } else {
 435             system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 436         }
 437         chmod 0600, "$prefix/private/secrets.tdb";
 438
 439 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 440 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 441 #
 442 #and having in krb5.conf:
 443 # ticket_lifetime = 799718400
 444 # renew_lifetime = 799718400
 445 #
 446 # The commands for the -2 keytab where were:
 447 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 448 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 449 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 450 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 451 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 452 #
 453 # and then for the -3 keytab, I did
 454 #
 455 # net changetrustpw; kdestroy and the same again.
 456 #
 457 # This creates a credential cache with a very long lifetime (2036 at
 458 # at 2011-04), and shows that running 'net changetrustpw' does not
 459 # break existing logins (for the secrets.tdb method at least).
 460 #
 461
 462         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
 463
 464         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
 465         chmod 0600, "$prefix/krb5_ccache-2";
 466
 467         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
 468         chmod 0600, "$prefix/krb5_ccache-3";
 469
 470         $self->check_or_start($ret, "yes", "no", "yes");
 471
 472         if (not $self->wait_for_start($ret)) {
 473                return undef;
 474         }
 475         return $ret;
 476 }
 477
 478 sub setup_maptoguest($$)
 479 {
 480         my ($self, $path) = @_;
 481
 482         print "PROVISIONING maptoguest...";
 483
 484         my $options = "
 485 map to guest = bad user
 486 ";
 487
 488         my $vars = $self->provision($path,
 489                                     "maptoguest",
 490                                     7,
 491                                     "maptoguestpass",
 492                                     $options);
 493
 494         $vars or return undef;
 495
 496         $self->check_or_start($vars,
 497                                "yes", "no", "yes");
 498
 499         if (not $self->wait_for_start($vars)) {
 500                return undef;
 501         }
 502
 503         $self->{vars}->{s3maptoguest} = $vars;
 504
 505         return $vars;
 506 }
 507
 508 sub stop_sig_term($$) {
 509         my ($self, $pid) = @_;
 510         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 511 }
 512
 513 sub stop_sig_kill($$) {
 514         my ($self, $pid) = @_;
 515         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 516 }
 517
 518 sub write_pid($$$)
 519 {
 520         my ($env_vars, $app, $pid) = @_;
 521
 522         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
 523         print PID $pid;
 524         close(PID);
 525 }
 526
 527 sub read_pid($$)
 528 {
 529         my ($env_vars, $app) = @_;
 530
 531         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
 532         my $pid = <PID>;
 533         close(PID);
 534         return $pid;
 535 }
 536
 537 sub check_or_start($$$$) {
 538         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
 539
 540         unlink($env_vars->{NMBD_TEST_LOG});
 541         print "STARTING NMBD...";
 542         my $pid = fork();
 543         if ($pid == 0) {
 544                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
 545                 open STDERR, '>&STDOUT';
 546
 547                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 548
 549                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 550                 $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
 551                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 552
 553                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 554                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 555                 $ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
 556
 557                 if ($nmbd ne "yes") {
 558                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 559                                 my $signame = shift;
 560                                 print("Skip nmbd received signal $signame");
 561                                 exit 0;
 562                         };
 563                         sleep($self->{server_maxtime});
 564                         exit 0;
 565                 }
 566
 567                 my @optargs = ("-d0");
 568                 if (defined($ENV{NMBD_OPTIONS})) {
 569                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
 570                 }
 571
 572                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
 573
 574                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 575                 if(defined($ENV{NMBD_VALGRIND})) {
 576                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
 577                 }
 578
 579                 exec(@preargs, Samba::bindir_path($self, "nmbd"), "-F", "--no-process-group", "--log-stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start nmbd: $!");
 580         }
 581         write_pid($env_vars, "nmbd", $pid);
 582         print "DONE\n";
 583
 584         unlink($env_vars->{WINBINDD_TEST_LOG});
 585         print "STARTING WINBINDD...";
 586         $pid = fork();
 587         if ($pid == 0) {
 588                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
 589                 open STDERR, '>&STDOUT';
 590
 591                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 592
 593                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 594                 $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
 595                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 596
 597                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 598                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 599                 $ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
 600
 601                 if ($winbindd ne "yes") {
 602                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 603                                 my $signame = shift;
 604                                 print("Skip winbindd received signal $signame");
 605                                 exit 0;
 606                         };
 607                         sleep($self->{server_maxtime});
 608                         exit 0;
 609                 }
 610
 611                 my @optargs = ("-d0");
 612                 if (defined($ENV{WINBINDD_OPTIONS})) {
 613                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
 614                 }
 615
 616                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
 617
 618                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 619                 if(defined($ENV{WINBINDD_VALGRIND})) {
 620                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
 621                 }
 622
 623                 print "Starting winbindd with config $env_vars->{SERVERCONFFILE})\n";
 624
 625                 exec(@preargs, Samba::bindir_path($self, "winbindd"), "-F", "--no-process-group", "--stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start winbindd: $!");
 626         }
 627         write_pid($env_vars, "winbindd", $pid);
 628         print "DONE\n";
 629
 630         unlink($env_vars->{SMBD_TEST_LOG});
 631         print "STARTING SMBD...";
 632         $pid = fork();
 633         if ($pid == 0) {
 634                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
 635                 open STDERR, '>&STDOUT';
 636
 637                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 638
 639                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 640                 $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
 641                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 642
 643                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 644                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 645                 $ENV{NSS_WRAPPER_WINBIND_SO_PATH} = $env_vars->{NSS_WRAPPER_WINBIND_SO_PATH};
 646
 647                 if ($smbd ne "yes") {
 648                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 649                                 my $signame = shift;
 650                                 print("Skip smbd received signal $signame");
 651                                 exit 0;
 652                         };
 653                         sleep($self->{server_maxtime});
 654                         exit 0;
 655                 }
 656
 657                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
 658                 my @optargs = ("-d0");
 659                 if (defined($ENV{SMBD_OPTIONS})) {
 660                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
 661                 }
 662                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 663                 if(defined($ENV{SMBD_VALGRIND})) {
 664                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
 665                 }
 666                 exec(@preargs, Samba::bindir_path($self, "smbd"), "-F", "--no-process-group", "--log-stdout", "-s", $env_vars->{SERVERCONFFILE}, @optargs) or die("Unable to start smbd: $!");
 667         }
 668         write_pid($env_vars, "smbd", $pid);
 669         print "DONE\n";
 670
 671         return 0;
 672 }
 673
 674 sub provision($$$$$$$)
 675 {
 676         my ($self, $prefix, $server, $swiface, $password, $extra_options, $no_delete_prefix) = @_;
 677
 678         ##
 679         ## setup the various environment variables we need
 680         ##
 681
 682         my %ret = ();
 683         my $server_ip = "127.0.0.$swiface";
 684         my $domain = "SAMBA-TEST";
 685
 686         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
 687         chomp $unix_name;
 688         my $unix_uid = $>;
 689         my $unix_gids_str = $);
 690         my @unix_gids = split(" ", $unix_gids_str);
 691
 692         my $prefix_abs = abs_path($prefix);
 693         my $bindir_abs = abs_path($self->{bindir});
 694         my $vfs_modulesdir_abs = ($ENV{VFSLIBDIR} or $bindir_abs);
 695
 696         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
 697
 698         my @dirs = ();
 699
 700         my $shrdir="$prefix_abs/share";
 701         push(@dirs,$shrdir);
 702
 703         my $libdir="$prefix_abs/lib";
 704         push(@dirs,$libdir);
 705
 706         my $piddir="$prefix_abs/pid";
 707         push(@dirs,$piddir);
 708
 709         my $privatedir="$prefix_abs/private";
 710         push(@dirs,$privatedir);
 711
 712         my $lockdir="$prefix_abs/lockdir";
 713         push(@dirs,$lockdir);
 714
 715         my $eventlogdir="$prefix_abs/lockdir/eventlog";
 716         push(@dirs,$eventlogdir);
 717
 718         my $logdir="$prefix_abs/logs";
 719         push(@dirs,$logdir);
 720
 721         my $driver32dir="$shrdir/W32X86";
 722         push(@dirs,$driver32dir);
 723
 724         my $driver64dir="$shrdir/x64";
 725         push(@dirs,$driver64dir);
 726
 727         my $driver40dir="$shrdir/WIN40";
 728         push(@dirs,$driver40dir);
 729
 730         my $ro_shrdir="$shrdir/root-tmp";
 731         push(@dirs,$ro_shrdir);
 732
 733         my $msdfs_shrdir="$shrdir/msdfsshare";
 734         push(@dirs,$msdfs_shrdir);
 735
 736         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
 737         push(@dirs,$msdfs_deeppath);
 738
 739         # this gets autocreated by winbindd
 740         my $wbsockdir="$prefix_abs/winbindd";
 741         my $wbsockprivdir="$lockdir/winbindd_privileged";
 742
 743         my $nmbdsockdir="$prefix_abs/nmbd";
 744         unlink($nmbdsockdir);
 745
 746         ##
 747         ## create the test directory layout
 748         ##
 749         die ("prefix_abs = ''") if $prefix_abs eq "";
 750         die ("prefix_abs = '/'") if $prefix_abs eq "/";
 751
 752         mkdir($prefix_abs, 0777);
 753         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
 754         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
 755             system("rm -rf $prefix_abs/*");
 756         }
 757         mkdir($_, 0777) foreach(@dirs);
 758
 759         ##
 760         ## create ro and msdfs share layout
 761         ##
 762
 763         chmod 0755, $ro_shrdir;
 764         my $unreadable_file = "$ro_shrdir/unreadable_file";
 765         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
 766                 warn("Unable to open $unreadable_file");
 767                 return undef;
 768         }
 769         close(UNREADABLE_FILE);
 770         chmod 0600, $unreadable_file;
 771
 772         my $msdfs_target = "$ro_shrdir/msdfs-target";
 773         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
 774                 warn("Unable to open $msdfs_target");
 775                 return undef;
 776         }
 777         close(MSDFS_TARGET);
 778         chmod 0666, $msdfs_target;
 779         symlink "msdfs:$server_ip\\ro-tmp", "$msdfs_shrdir/msdfs-src1";
 780         symlink "msdfs:$server_ip\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
 781
 782         my $conffile="$libdir/server.conf";
 783
 784         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
 785         my $nss_wrapper_passwd = "$privatedir/passwd";
 786         my $nss_wrapper_group = "$privatedir/group";
 787
 788         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
 789
 790         my @eventlog_list = ("dns server", "application");
 791
 792         ##
 793         ## calculate uids and gids
 794         ##
 795
 796         my ($max_uid, $max_gid);
 797         my ($uid_nobody, $uid_root);
 798         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers);
 799
 800         if ($unix_uid < 0xffff - 2) {
 801                 $max_uid = 0xffff;
 802         } else {
 803                 $max_uid = $unix_uid;
 804         }
 805
 806         $uid_root = $max_uid - 1;
 807         $uid_nobody = $max_uid - 2;
 808
 809         if ($unix_gids[0] < 0xffff - 3) {
 810                 $max_gid = 0xffff;
 811         } else {
 812                 $max_gid = $unix_gids[0];
 813         }
 814
 815         $gid_nobody = $max_gid - 1;
 816         $gid_nogroup = $max_gid - 2;
 817         $gid_root = $max_gid - 3;
 818         $gid_domusers = $max_gid - 4;
 819
 820         ##
 821         ## create conffile
 822         ##
 823
 824         unless (open(CONF, ">$conffile")) {
 825                 warn("Unable to open $conffile");
 826                 return undef;
 827         }
 828         print CONF "
 829 [global]
 830         netbios name = $server
 831         interfaces = $server_ip/8
 832         bind interfaces only = yes
 833         panic action = $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
 834
 835         workgroup = $domain
 836
 837         private dir = $privatedir
 838         pid directory = $piddir
 839         lock directory = $lockdir
 840         log file = $logdir/log.\%m
 841         log level = 0
 842         debug pid = yes
 843         max log size = 0
 844
 845         state directory = $lockdir
 846         cache directory = $lockdir
 847
 848         passdb backend = tdbsam
 849
 850         time server = yes
 851
 852         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
 853         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
 854         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
 855         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
 856         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
 857         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
 858         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
 859
 860         addprinter command =            $mod_printer_pl -a -s $conffile --
 861         deleteprinter command =         $mod_printer_pl -d -s $conffile --
 862
 863         eventlog list = application \"dns server\"
 864
 865         kernel oplocks = no
 866         kernel change notify = no
 867
 868         syslog = no
 869         printing = bsd
 870         printcap name = /dev/null
 871
 872         winbindd:socket dir = $wbsockdir
 873         nmbd:socket dir = $nmbdsockdir
 874         idmap config * : range = 100000-200000
 875         winbind enum users = yes
 876         winbind enum groups = yes
 877
 878 #       min receivefile size = 4000
 879
 880         max protocol = SMB2
 881         read only = no
 882         server signing = auto
 883
 884         smbd:sharedelay = 100000
 885 #       smbd:writetimeupdatedelay = 500000
 886         map hidden = no
 887         map system = no
 888         map readonly = no
 889         store dos attributes = yes
 890         create mask = 755
 891         vfs objects = $vfs_modulesdir_abs/xattr_tdb.so $vfs_modulesdir_abs/streams_depot.so
 892
 893         printing = vlp
 894         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
 895         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
 896         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
 897         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
 898         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
 899         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
 900         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
 901         lpq cache time = 0
 902
 903         ncalrpc dir = $prefix_abs/ncalrpc
 904         rpc_server:epmapper = daemon
 905         rpc_server:tcpip = yes
 906
 907         resolv:host file = $dns_host_file
 908
 909         # The samba3.blackbox.smbclient_s3 test uses this to test that
 910         # sending messages works, and that the %m sub works.
 911         message command = mv %s $shrdir/message.%m
 912
 913         # Begin extra options
 914         $extra_options
 915         # End extra options
 916
 917         #Include user defined custom parameters if set
 918 ";
 919
 920         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
 921                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
 922         }
 923
 924         print CONF "
 925 [tmp]
 926         path = $shrdir
 927         comment = smb username is [%U]
 928 [tmpguest]
 929         path = $shrdir
 930         guest ok = yes
 931 [guestonly]
 932         path = $shrdir
 933         guest only = yes
 934         guest ok = yes
 935 [forceuser]
 936         path = $shrdir
 937         force user = $unix_name
 938         guest ok = yes
 939 [forcegroup]
 940         path = $shrdir
 941         force group = nogroup
 942         guest ok = yes
 943 [ro-tmp]
 944         path = $ro_shrdir
 945         guest ok = yes
 946 [msdfs-share]
 947         path = $msdfs_shrdir
 948         msdfs root = yes
 949         guest ok = yes
 950 [hideunread]
 951         copy = tmp
 952         hide unreadable = yes
 953 [tmpcase]
 954         copy = tmp
 955         case sensitive = yes
 956 [hideunwrite]
 957         copy = tmp
 958         hide unwriteable files = yes
 959 [print1]
 960         copy = tmp
 961         printable = yes
 962
 963 [print2]
 964         copy = print1
 965 [print3]
 966         copy = print1
 967 [lp]
 968         copy = print1
 969 [print\$]
 970         copy = tmp
 971         ";
 972         close(CONF);
 973
 974         ##
 975         ## create a test account
 976         ##
 977
 978         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
 979            warn("Unable to open $nss_wrapper_passwd");
 980            return undef;
 981         }
 982         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
 983 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
 984 ";
 985         if ($unix_uid != 0) {
 986                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false";
 987         }
 988         close(PASSWD);
 989
 990         unless (open(GROUP, ">$nss_wrapper_group")) {
 991              warn("Unable to open $nss_wrapper_group");
 992              return undef;
 993         }
 994         print GROUP "nobody:x:$gid_nobody:
 995 nogroup:x:$gid_nogroup:nobody
 996 $unix_name-group:x:$unix_gids[0]:
 997 domusers:X:$gid_domusers:
 998 ";
 999         if ($unix_gids[0] != 0) {
1000                 print GROUP "root:x:$gid_root:";
1001         }
1002
1003         close(GROUP);
1004
1005         foreach my $evlog (@eventlog_list) {
1006                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
1007                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
1008                 close(EVENTLOG);
1009         }
1010
1011         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1012         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1013
1014         my $cmd = Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
1015         unless (open(PWD, "|$cmd")) {
1016              warn("Unable to set password for test account\n$cmd");
1017              return undef;
1018         }
1019         print PWD "$password\n$password\n";
1020         unless (close(PWD)) {
1021              warn("Unable to set password for test account\n$cmd");
1022              return undef;
1023         }
1024         print "DONE\n";
1025
1026         open(HOSTS, ">>$ENV{SELFTEST_PREFIX}/dns_host_file") or die("Unable to open $ENV{SELFTEST_PREFIX}/dns_host_file");
1027         print HOSTS "A $server. $server_ip
1028 ";
1029         close(HOSTS);
1030
1031         $ret{SERVER_IP} = $server_ip;
1032         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
1033         $ret{NMBD_TEST_LOG_POS} = 0;
1034         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
1035         $ret{WINBINDD_TEST_LOG_POS} = 0;
1036         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
1037         $ret{SMBD_TEST_LOG_POS} = 0;
1038         $ret{SERVERCONFFILE} = $conffile;
1039         $ret{CONFIGURATION} ="-s $conffile";
1040         $ret{SERVER} = $server;
1041         $ret{USERNAME} = $unix_name;
1042         $ret{USERID} = $unix_uid;
1043         $ret{DOMAIN} = $domain;
1044         $ret{NETBIOSNAME} = $server;
1045         $ret{PASSWORD} = $password;
1046         $ret{PIDDIR} = $piddir;
1047         $ret{WINBINDD_SOCKET_DIR} = $wbsockdir;
1048         $ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
1049         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
1050         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
1051         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1052         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1053         $ret{NSS_WRAPPER_WINBIND_SO_PATH} = $ENV{NSS_WRAPPER_WINBIND_SO_PATH};
1054         if (not defined($ret{NSS_WRAPPER_WINBIND_SO_PATH})) {
1055                 $ret{NSS_WRAPPER_WINBIND_SO_PATH} = Samba::bindir_path($self, "default/nsswitch/libnss-winbind.so");
1056         }
1057         $ret{LOCAL_PATH} = "$shrdir";
1058
1059         return \%ret;
1060 }
1061
1062 sub wait_for_start($$)
1063 {
1064         my ($self, $envvars) = @_;
1065
1066         # give time for nbt server to register its names
1067         print "delaying for nbt name registration\n";
1068         sleep(10);
1069         # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
1070         system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
1071         system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} __SAMBA__");
1072         system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
1073         system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
1074         system(Samba::bindir_path($self, "nmblookup3") ." $envvars->{CONFIGURATION} $envvars->{SERVER}");
1075
1076         # make sure smbd is also up set
1077         print "wait for smbd\n";
1078
1079         my $count = 0;
1080         my $ret;
1081         do {
1082             $ret = system(Samba::bindir_path($self, "smbclient3") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
1083             if ($ret != 0) {
1084                 sleep(2);
1085             }
1086             $count++
1087         } while ($ret != 0 && $count < 10);
1088         if ($count == 10) {
1089             print "SMBD failed to start up in a reasonable time (20sec)\n";
1090             teardown_env($self, $envvars);
1091             return 0;
1092         }
1093         # Ensure we have domain users mapped.
1094         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
1095         if ($ret != 0) {
1096             return 1;
1097         }
1098
1099         print $self->getlog_env($envvars);
1100
1101         return 1;
1102 }
1103
1104 1;