2 Unix SMB/CIFS implementation.
3 SMB parameters and setup, plus a whole lot more.
5 Copyright (C) Andrew Tridgell 1992-2000
6 Copyright (C) John H Terpstra 1996-2002
7 Copyright (C) Luke Kenneth Casson Leighton 1996-2000
8 Copyright (C) Paul Ashton 1998-2000
9 Copyright (C) Simo Sorce 2001-2002
10 Copyright (C) Martin Pool 2002
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 3 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program. If not, see <http://www.gnu.org/licenses/>.
29 /* logged when starting the various Samba daemons */
30 #define COPYRIGHT_STARTUP_MESSAGE "Copyright Andrew Tridgell and the Samba Team 1992-2007"
33 #if defined(LARGE_SMB_OFF_T)
34 #define BUFFER_SIZE (128*1024)
35 #else /* no large readwrite possible */
36 #define BUFFER_SIZE (0xFFFF)
39 #define SAFETY_MARGIN 1024
40 #define LARGE_WRITEX_HDR_SIZE 65
43 #define DGRAM_PORT 138
46 #define SMB_PORTS "445 139"
48 #define Undefined (-1)
56 #ifndef DEF_CREATE_MASK
57 #define DEF_CREATE_MASK (0755)
60 /* string manipulation flags - see clistr.c and srvstr.c */
61 #define STR_TERMINATE 1
65 #define STR_NOALIGN 16
66 #define STR_TERMINATE_ASCII 128
68 /* how long to wait for secondary SMB packets (milli-seconds) */
69 #define SMB_SECONDARY_WAIT (60*1000)
74 /* this defines the error codes that receive_smb can put in smb_read_error */
75 enum smb_read_errors {
80 SMB_WRITE_ERROR, /* This error code can go into the client smb_rw_error. */
83 SMB_DO_NOT_DO_TDIS, /* cli_close_connection() check for this when smbfs wants to keep tree connected */
87 #define DIR_STRUCT_SIZE 43
89 /* these define the attribute byte as seen by DOS */
90 #define aRONLY (1L<<0) /* 0x01 */
91 #define aHIDDEN (1L<<1) /* 0x02 */
92 #define aSYSTEM (1L<<2) /* 0x04 */
93 #define aVOLID (1L<<3) /* 0x08 */
94 #define aDIR (1L<<4) /* 0x10 */
95 #define aARCH (1L<<5) /* 0x20 */
106 #define DOS_OPEN_RDONLY 0
107 #define DOS_OPEN_WRONLY 1
108 #define DOS_OPEN_RDWR 2
109 #define DOS_OPEN_EXEC 3
110 #define DOS_OPEN_FCB 0xF
112 /* define shifts and masks for share and open modes. */
113 #define OPENX_MODE_MASK 0xF
114 #define DENY_MODE_SHIFT 4
115 #define DENY_MODE_MASK 0x7
116 #define GET_OPENX_MODE(x) ((x) & OPENX_MODE_MASK)
117 #define SET_OPENX_MODE(x) ((x) & OPENX_MODE_MASK)
118 #define GET_DENY_MODE(x) (((x)>>DENY_MODE_SHIFT) & DENY_MODE_MASK)
119 #define SET_DENY_MODE(x) (((x) & DENY_MODE_MASK) <<DENY_MODE_SHIFT)
121 /* Sync on open file (not sure if used anymore... ?) */
122 #define FILE_SYNC_OPENMODE (1<<14)
123 #define GET_FILE_SYNC_OPENMODE(x) (((x) & FILE_SYNC_OPENMODE) ? True : False)
125 /* open disposition values */
126 #define OPENX_FILE_EXISTS_FAIL 0
127 #define OPENX_FILE_EXISTS_OPEN 1
128 #define OPENX_FILE_EXISTS_TRUNCATE 2
130 /* mask for open disposition. */
131 #define OPENX_FILE_OPEN_MASK 0x3
133 #define GET_FILE_OPENX_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
134 #define SET_FILE_OPENX_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
136 /* The above can be OR'ed with... */
137 #define OPENX_FILE_CREATE_IF_NOT_EXIST 0x10
138 #define OPENX_FILE_FAIL_IF_NOT_EXIST 0
142 typedef union unid_t {
148 * SMB UCS2 (16-bit unicode) internal type.
149 * smb_ucs2_t is *always* in little endian format.
152 typedef uint16 smb_ucs2_t;
154 #ifdef WORDS_BIGENDIAN
160 /* turn a 7 bit character into a ucs2 character */
161 #define UCS2_CHAR(c) ((c) << UCS2_SHIFT)
163 /* return an ascii version of a ucs2 character */
164 #define UCS2_TO_CHAR(c) (((c) >> UCS2_SHIFT) & 0xff)
166 /* Copy into a smb_ucs2_t from a possibly unaligned buffer. Return the copied smb_ucs2_t */
167 #define COPY_UCS2_CHAR(dest,src) (((unsigned char *)(dest))[0] = ((unsigned char *)(src))[0],\
168 ((unsigned char *)(dest))[1] = ((unsigned char *)(src))[1], (dest))
170 /* Large data type for manipulating uint32 unicode codepoints */
171 typedef uint32 codepoint_t;
172 #define INVALID_CODEPOINT ((codepoint_t)-1)
174 /* pipe string names */
175 #define PIPE_LANMAN "\\PIPE\\LANMAN"
176 #define PIPE_SRVSVC "\\PIPE\\srvsvc"
177 #define PIPE_SAMR "\\PIPE\\samr"
178 #define PIPE_WINREG "\\PIPE\\winreg"
179 #define PIPE_WKSSVC "\\PIPE\\wkssvc"
180 #define PIPE_NETLOGON "\\PIPE\\NETLOGON"
181 #define PIPE_NTLSA "\\PIPE\\ntlsa"
182 #define PIPE_NTSVCS "\\PIPE\\ntsvcs"
183 #define PIPE_LSASS "\\PIPE\\lsass"
184 #define PIPE_LSARPC "\\PIPE\\lsarpc"
185 #define PIPE_SPOOLSS "\\PIPE\\spoolss"
186 #define PIPE_NETDFS "\\PIPE\\netdfs"
187 #define PIPE_ECHO "\\PIPE\\rpcecho"
188 #define PIPE_SHUTDOWN "\\PIPE\\initshutdown"
189 #define PIPE_EPM "\\PIPE\\epmapper"
190 #define PIPE_SVCCTL "\\PIPE\\svcctl"
191 #define PIPE_EVENTLOG "\\PIPE\\eventlog"
193 #define PIPE_NETLOGON_PLAIN "\\NETLOGON"
196 #define PI_LSARPC_DS 1
198 #define PI_NETLOGON 3
205 #define PI_INITSHUTDOWN 10
207 #define PI_EVENTLOG 12
209 #define PI_MAX_PIPES 14
211 /* 64 bit time (100usec) since ????? - cifs6.txt, section 3.5, page 30 */
212 typedef uint64_t NTTIME;
215 /* Allowable account control bits */
216 #define ACB_DISABLED 0x00000001 /* 1 = User account disabled */
217 #define ACB_HOMDIRREQ 0x00000002 /* 1 = Home directory required */
218 #define ACB_PWNOTREQ 0x00000004 /* 1 = User password not required */
219 #define ACB_TEMPDUP 0x00000008 /* 1 = Temporary duplicate account */
220 #define ACB_NORMAL 0x00000010 /* 1 = Normal user account */
221 #define ACB_MNS 0x00000020 /* 1 = MNS logon user account */
222 #define ACB_DOMTRUST 0x00000040 /* 1 = Interdomain trust account */
223 #define ACB_WSTRUST 0x00000080 /* 1 = Workstation trust account */
224 #define ACB_SVRTRUST 0x00000100 /* 1 = Server trust account (BDC) */
225 #define ACB_PWNOEXP 0x00000200 /* 1 = User password does not expire */
226 #define ACB_AUTOLOCK 0x00000400 /* 1 = Account auto locked */
228 /* only valid for > Windows 2000 */
229 #define ACB_ENC_TXT_PWD_ALLOWED 0x00000800 /* 1 = Text password encryped */
230 #define ACB_SMARTCARD_REQUIRED 0x00001000 /* 1 = Smart Card required */
231 #define ACB_TRUSTED_FOR_DELEGATION 0x00002000 /* 1 = Trusted for Delegation */
232 #define ACB_NOT_DELEGATED 0x00004000 /* 1 = Not delegated */
233 #define ACB_USE_DES_KEY_ONLY 0x00008000 /* 1 = Use DES key only */
234 #define ACB_DONT_REQUIRE_PREAUTH 0x00010000 /* 1 = Preauth not required */
235 #define ACB_PWEXPIRED 0x00020000 /* 1 = Password is expired */
236 #define ACB_NO_AUTH_DATA_REQD 0x00080000 /* 1 = No authorization data required */
238 #define MAX_HOURS_LEN 32
241 #define MAXSUBAUTHS 15 /* max sub authorities in a SID */
244 #define SID_MAX_SIZE ((size_t)(8+(MAXSUBAUTHS*4)))
246 #define LOOKUP_NAME_NONE 0x00000000
247 #define LOOKUP_NAME_ISOLATED 0x00000001 /* Look up unqualified names */
248 #define LOOKUP_NAME_REMOTE 0x00000002 /* Ask others */
249 #define LOOKUP_NAME_GROUP 0x00000004 /* (unused) This is a NASTY hack for
250 valid users = @foo where foo also
251 exists in as user. */
252 #define LOOKUP_NAME_EXPLICIT 0x00000008 /* Only include
253 explicitly mapped names and not
254 the Unix {User,Group} domain */
255 #define LOOKUP_NAME_BUILTIN 0x00000010 /* builtin names */
256 #define LOOKUP_NAME_WKN 0x00000020 /* well known names */
257 #define LOOKUP_NAME_DOMAIN 0x00000040 /* only lookup own domain */
258 #define LOOKUP_NAME_LOCAL (LOOKUP_NAME_ISOLATED\
259 |LOOKUP_NAME_BUILTIN\
262 #define LOOKUP_NAME_ALL (LOOKUP_NAME_ISOLATED\
264 |LOOKUP_NAME_BUILTIN\
269 * @brief Security Identifier
271 * @sa http://msdn.microsoft.com/library/default.asp?url=/library/en-us/security/accctrl_38yn.asp
273 typedef struct dom_sid {
274 uint8 sid_rev_num; /**< SID revision number */
275 uint8 num_auths; /**< Number of sub-authorities */
276 uint8 id_auth[6]; /**< Identifier Authority */
278 * Pointer to sub-authorities.
280 * @note The values in these uint32's are in *native* byteorder, not
281 * neccessarily little-endian...... JRA.
283 uint32 sub_auths[MAXSUBAUTHS];
286 #define dom_sid2 dom_sid
287 #define dom_sid28 dom_sid
297 ID_TYPE_NOT_SPECIFIED = 0,
310 enum id_mapping status;
313 #include "librpc/ndr/misc.h"
314 #include "librpc/ndr/security.h"
315 #include "librpc/ndr/libndr.h"
316 #include "librpc/gen_ndr/lsa.h"
317 #include "librpc/gen_ndr/dfs.h"
318 #include "librpc/gen_ndr/winreg.h"
319 #include "librpc/gen_ndr/initshutdown.h"
320 #include "librpc/gen_ndr/eventlog.h"
321 #include "librpc/gen_ndr/srvsvc.h"
322 #include "librpc/gen_ndr/wkssvc.h"
323 #include "librpc/gen_ndr/echo.h"
324 #include "librpc/gen_ndr/svcctl.h"
326 struct lsa_dom_info {
334 struct lsa_name_info {
336 enum lsa_SidType type;
341 /* Some well-known SIDs */
342 extern const DOM_SID global_sid_World_Domain;
343 extern const DOM_SID global_sid_World;
344 extern const DOM_SID global_sid_Creator_Owner_Domain;
345 extern const DOM_SID global_sid_NT_Authority;
346 extern const DOM_SID global_sid_System;
347 extern const DOM_SID global_sid_NULL;
348 extern const DOM_SID global_sid_Authenticated_Users;
349 extern const DOM_SID global_sid_Network;
350 extern const DOM_SID global_sid_Creator_Owner;
351 extern const DOM_SID global_sid_Creator_Group;
352 extern const DOM_SID global_sid_Anonymous;
353 extern const DOM_SID global_sid_Builtin;
354 extern const DOM_SID global_sid_Builtin_Administrators;
355 extern const DOM_SID global_sid_Builtin_Users;
356 extern const DOM_SID global_sid_Builtin_Guests;
357 extern const DOM_SID global_sid_Builtin_Power_Users;
358 extern const DOM_SID global_sid_Builtin_Account_Operators;
359 extern const DOM_SID global_sid_Builtin_Server_Operators;
360 extern const DOM_SID global_sid_Builtin_Print_Operators;
361 extern const DOM_SID global_sid_Builtin_Backup_Operators;
362 extern const DOM_SID global_sid_Builtin_Replicator;
363 extern const DOM_SID global_sid_Builtin_PreWin2kAccess;
364 extern const DOM_SID global_sid_Unix_Users;
365 extern const DOM_SID global_sid_Unix_Groups;
368 * The complete list of SIDS belonging to this user.
369 * Created when a vuid is registered.
370 * The definition of the user_sids array is as follows :
372 * token->user_sids[0] = primary user SID.
373 * token->user_sids[1] = primary group SID.
374 * token->user_sids[2..num_sids] = supplementary group SIDS.
377 #define PRIMARY_USER_SID_INDEX 0
378 #define PRIMARY_GROUP_SID_INDEX 1
380 typedef struct nt_user_token {
386 typedef struct _unix_token {
393 /* 32 bit time (sec) since 01jan1970 - cifs6.txt, section 3.5, page 30 */
394 typedef struct time_info {
398 typedef struct write_cache {
407 smb_ucs2_t *origname;
408 smb_ucs2_t *filename;
409 SMB_STRUCT_STAT *statinfo;
412 #include "fake_file.h"
417 SMB_BIG_UINT position_information;
419 uint32 private_options; /* NT Create options, but we only look at
420 * NTCREATEX_OPTIONS_PRIVATE_DENY_DOS and
421 * NTCREATEX_OPTIONS_PRIVATE_DENY_FCB (Except
422 * for print files *only*, where
423 * DELETE_ON_CLOSE is not stored in the share
426 unsigned long gen_id;
429 struct event_context;
433 struct share_mode_entry;
436 struct vfs_fsp_data {
437 struct vfs_fsp_data *next;
438 struct vfs_handle_struct *owner;
439 /* NOTE: This structure contains two pointers so that we can guarantee
440 * that the end of the structure is always both 4-byte and 8-byte aligned.
444 /* the basic packet size, assuming no words or bytes */
447 struct notify_change {
452 struct notify_mid_map;
455 struct notify_change_request;
456 struct sys_notify_backend;
457 struct sys_notify_context {
458 struct event_context *ev;
459 struct connection_struct *conn;
460 void *private_data; /* For use by the system backend */
463 struct notify_change_buf {
465 * If no requests are pending, changes are queued here. Simple array,
470 * num_changes == -1 means that we have got a catch-all change, when
471 * asked we just return NT_STATUS_OK without specific changes.
474 struct notify_change *changes;
477 * If no changes are around requests are queued here. Using a linked
478 * list, because we have to append at the end and delete from the top.
480 struct notify_change_request *requests;
483 typedef struct files_struct {
484 struct files_struct *next, *prev;
486 struct connection_struct *conn;
487 struct fd_handle *fh;
488 unsigned int num_smb_operations;
489 uint16 rap_print_jobid;
490 struct file_id file_id;
491 SMB_BIG_UINT initial_allocation_size; /* Faked up initial allocation on disk. */
496 struct timeval open_time;
497 uint32 access_mask; /* NTCreateX access bits (FILE_READ_DATA etc.) */
498 uint32 share_access; /* NTCreateX share constants (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE). */
499 bool pending_modtime_owner;
500 struct timespec pending_modtime;
501 struct timespec last_write_time;
503 int sent_oplock_break;
504 struct timed_event *oplock_timeout;
505 struct lock_struct last_lock_failure;
506 int current_lock_count; /* Count the number of outstanding locks and pending locks. */
508 struct share_mode_entry *pending_break_messages;
509 int num_pending_break_messages;
518 bool aio_write_behind;
520 bool initial_delete_on_close; /* Only set at NTCreateX if file was created. */
524 struct vfs_fsp_data *vfs_extension;
525 FAKE_FILE_HANDLE *fake_file_handle;
527 struct notify_change_buf *notify;
530 #include "ntquotas.h"
531 #include "sysquotas.h"
533 /* used to hold an arbitrary blob of data */
534 typedef struct data_blob {
537 void (*free)(struct data_blob *data_blob);
540 extern const DATA_BLOB data_blob_null;
543 * Structure used to keep directory state information around.
544 * Used in NT change-notify code.
552 struct vuid_cache_entry {
559 unsigned int entries;
560 struct vuid_cache_entry array[VUID_CACHE_SIZE];
566 } name_compare_entry;
569 struct trans_state *next, *prev;
573 uint32 max_param_return;
574 uint32 max_data_return;
575 uint32 max_setup_return;
577 uint8 cmd; /* SMBtrans or SMBtrans2 */
579 char *name; /* for trans requests */
580 uint16 call; /* for trans2 and nttrans requests */
582 bool close_on_completion;
585 unsigned int setup_count;
588 size_t received_data;
589 size_t received_param;
598 /* Include VFS stuff */
600 #include "smb_acls.h"
603 struct dfree_cached_info {
604 time_t last_dfree_time;
605 SMB_BIG_UINT dfree_ret;
613 struct share_params {
617 struct share_iterator {
621 typedef struct connection_struct {
622 struct connection_struct *next, *prev;
623 TALLOC_CTX *mem_ctx; /* long-lived memory context for things hanging off this struct. */
624 unsigned cnum; /* an index passed over the wire */
625 struct share_params *params;
628 struct vuid_cache vuid_cache;
629 struct dptr_struct *dirptr;
632 bool read_only; /* Attributes for the current user of the share. */
633 bool admin_user; /* Attributes for the current user of the share. */
638 struct vfs_ops vfs; /* Filesystem operations */
639 struct vfs_ops vfs_opaque; /* OPAQUE Filesystem operations */
640 struct vfs_handle_struct *vfs_handles; /* for the new plugins */
642 char *user; /* name of user who *opened* this connection */
643 uid_t uid; /* uid of user who *opened* this connection */
644 gid_t gid; /* gid of user who *opened* this connection */
645 char client_address[INET6_ADDRSTRLEN]; /* String version of client IP address. */
647 uint16 vuid; /* vuid of user who *opened* this connection, or UID_FIELD_INVALID */
649 /* following groups stuff added by ih */
651 /* This groups info is valid for the user that *opened* the connection */
654 NT_USER_TOKEN *nt_user_token;
657 time_t lastused_count;
660 unsigned int num_smb_operations; /* Count of smb operations on this tree. */
662 /* Semantics requested by the client or forced by the server config. */
665 bool short_case_preserve;
667 /* Semantics provided by the underlying filesystem. */
670 name_compare_entry *hide_list; /* Per-share list of files to return as hidden. */
671 name_compare_entry *veto_list; /* Per-share list of files to veto (never show). */
672 name_compare_entry *veto_oplock_list; /* Per-share list of files to refuse oplocks on. */
673 name_compare_entry *aio_write_behind_list; /* Per-share list of files to use aio write behind on. */
674 struct dfree_cached_info *dfree_info;
675 struct trans_state *pending_trans;
676 struct notify_context *notify_ctx;
679 struct current_user {
680 connection_struct *conn;
683 NT_USER_TOKEN *nt_user_token;
698 /* Defines for the sent_oplock_break field above. */
699 #define NO_BREAK_SENT 0
700 #define BREAK_TO_NONE_SENT 1
701 #define LEVEL_II_BREAK_SENT 2
704 fstring smb_name; /* user name from the client */
705 fstring unix_name; /* unix user name of a validated user */
706 fstring full_name; /* to store full name (such as "Joe Bloggs") from gecos field of password file */
707 fstring domain; /* domain that the client specified */
710 /* Extra fields above "LPQ_PRINTING" are used to map extra NT status codes. */
712 enum {LPQ_QUEUED=0,LPQ_PAUSED,LPQ_SPOOLING,LPQ_PRINTING,LPQ_ERROR,LPQ_DELETING,
713 LPQ_OFFLINE,LPQ_PAPEROUT,LPQ_PRINTED,LPQ_DELETED,LPQ_BLOCKED,LPQ_USER_INTERVENTION};
715 typedef struct _print_queue_struct {
716 int job; /* normally the UNIX jobid -- see note in
717 printing.c:traverse_fn_delete() */
725 } print_queue_struct;
727 enum {LPSTAT_OK, LPSTAT_STOPPED, LPSTAT_ERROR};
733 } print_status_struct;
735 /* used for server information: client, nameserv and ipc */
736 struct server_info_struct {
740 fstring domain; /* used ONLY in ipc.c NOT namework.c */
741 bool server_added; /* used ONLY in ipc.c NOT namework.c */
744 /* used for network interfaces */
746 struct interface *next, *prev;
749 struct sockaddr_storage ip;
750 struct sockaddr_storage netmask;
751 struct sockaddr_storage bcast;
754 /* Internal message queue for deferred opens. */
755 struct pending_message_list {
756 struct pending_message_list *next, *prev;
757 struct timeval request_time; /* When was this first issued? */
758 struct timeval end_time; /* When does this time out? */
760 DATA_BLOB private_data;
763 #define SHARE_MODE_FLAG_POSIX_OPEN 0x1
764 #define SHARE_MODE_ALLOW_INITIAL_DELETE_ON_CLOSE 0x2
766 /* struct returned by get_share_modes */
767 struct share_mode_entry {
768 struct server_id pid;
771 uint32 access_mask; /* NTCreateX access bits (FILE_READ_DATA etc.) */
772 uint32 share_access; /* NTCreateX share constants (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE). */
773 uint32 private_options; /* NT Create options, but we only look at
774 * NTCREATEX_OPTIONS_PRIVATE_DENY_DOS and
775 * NTCREATEX_OPTIONS_PRIVATE_DENY_FCB for
776 * smbstatus and swat */
779 unsigned long share_file_id;
780 uint32 uid; /* uid of file opener. */
781 uint16 flags; /* See SHARE_MODE_XX above. */
784 /* oplock break message definition - linearization of share_mode_entry.
787 0 struct server_id pid 4
790 8 uint32 access_mask 4
791 12 uint32 share_access 4
792 16 uint32 private_options 4
794 24 uint32 time usec 4
795 28 SMB_DEV_T dev 8 bytes.
796 36 SMB_INO_T inode 8 bytes
797 44 unsigned long file_id 4 bytes
798 48 uint32 uid 4 bytes
799 52 uint16 flags 2 bytes
803 #ifdef CLUSTER_SUPPORT
804 #define MSG_SMB_SHARE_MODE_ENTRY_SIZE 58
806 #define MSG_SMB_SHARE_MODE_ENTRY_SIZE 54
809 struct share_mode_lock {
810 const char *servicepath; /* canonicalized. */
811 const char *filename;
814 struct share_mode_entry *share_modes;
815 UNIX_USER_TOKEN *delete_token;
816 bool delete_on_close;
819 struct db_record *record;
823 * Internal structure of locking.tdb share mode db.
824 * Used by locking.c and libsmbsharemodes.c
827 struct locking_data {
830 int num_share_mode_entries;
831 bool delete_on_close;
832 uint32 delete_token_size; /* Only valid if either of
833 the two previous fields
836 struct share_mode_entry dummy; /* Needed for alignment. */
838 /* The following four entries are implicit
839 struct share_mode_entry modes[num_share_mode_entries];
840 char unix_token[delete_token_size] (divisible by 4).
846 /* Used to store pipe open records for NetFileEnum() */
848 struct pipe_open_rec {
849 struct server_id pid;
856 #define NT_HASH_LEN 16
857 #define LM_HASH_LEN 16
859 /* Password history contants. */
860 #define PW_HISTORY_SALT_LEN 16
861 #define SALTED_MD5_HASH_LEN 16
862 #define PW_HISTORY_ENTRY_LEN (PW_HISTORY_SALT_LEN+SALTED_MD5_HASH_LEN)
863 #define MAX_PW_HISTORY_LEN 24
866 * Flags for account policy.
868 #define AP_MIN_PASSWORD_LEN 1
869 #define AP_PASSWORD_HISTORY 2
870 #define AP_USER_MUST_LOGON_TO_CHG_PASS 3
871 #define AP_MAX_PASSWORD_AGE 4
872 #define AP_MIN_PASSWORD_AGE 5
873 #define AP_LOCK_ACCOUNT_DURATION 6
874 #define AP_RESET_COUNT_TIME 7
875 #define AP_BAD_ATTEMPT_LOCKOUT 8
876 #define AP_TIME_TO_LOGOUT 9
877 #define AP_REFUSE_MACHINE_PW_CHANGE 10
880 * Flags for local user manipulation.
883 #define LOCAL_ADD_USER 0x1
884 #define LOCAL_DELETE_USER 0x2
885 #define LOCAL_DISABLE_USER 0x4
886 #define LOCAL_ENABLE_USER 0x8
887 #define LOCAL_TRUST_ACCOUNT 0x10
888 #define LOCAL_SET_NO_PASSWORD 0x20
889 #define LOCAL_SET_PASSWORD 0x40
890 #define LOCAL_SET_LDAP_ADMIN_PW 0x80
891 #define LOCAL_INTERDOM_ACCOUNT 0x100
892 #define LOCAL_AM_ROOT 0x200 /* Act as root */
894 /* key and data in the connections database - used in smbstatus and smbd */
895 struct connections_key {
896 struct server_id pid;
901 struct connections_data {
903 struct server_id pid;
907 char servicename[FSTRING_LEN];
909 char machine[FSTRING_LEN];
911 uint32 bcast_msg_flags;
915 /* the following are used by loadparm for option lists */
917 P_BOOL,P_BOOLREV,P_CHAR,P_INTEGER,P_OCTAL,P_LIST,
918 P_STRING,P_USTRING,P_ENUM,P_SEP
922 P_LOCAL,P_GLOBAL,P_SEPARATOR,P_NONE
935 bool (*special)(int snum, const char *, char **);
936 const struct enum_list *enum_list;
947 /* The following flags are used in SWAT */
948 #define FLAG_BASIC 0x0001 /* Display only in BASIC view */
949 #define FLAG_SHARE 0x0002 /* file sharing options */
950 #define FLAG_PRINT 0x0004 /* printing options */
951 #define FLAG_GLOBAL 0x0008 /* local options that should be globally settable in SWAT */
952 #define FLAG_WIZARD 0x0010 /* Parameters that the wizard will operate on */
953 #define FLAG_ADVANCED 0x0020 /* Parameters that will be visible in advanced view */
954 #define FLAG_DEVELOPER 0x0040 /* No longer used */
955 #define FLAG_DEPRECATED 0x1000 /* options that should no longer be used */
956 #define FLAG_HIDE 0x2000 /* options that should be hidden in SWAT */
957 #define FLAG_DOS_STRING 0x4000 /* convert from UNIX to DOS codepage when reading this string. */
964 /* offsets into message for common items */
971 #define smb_pidhigh 16
972 #define smb_ss_field 18
998 /* flag defines. CIFS spec 3.1.1 */
999 #define FLAG_SUPPORT_LOCKREAD 0x01
1000 #define FLAG_CLIENT_BUF_AVAIL 0x02
1001 #define FLAG_RESERVED 0x04
1002 #define FLAG_CASELESS_PATHNAMES 0x08
1003 #define FLAG_CANONICAL_PATHNAMES 0x10
1004 #define FLAG_REQUEST_OPLOCK 0x20
1005 #define FLAG_REQUEST_BATCH_OPLOCK 0x40
1006 #define FLAG_REPLY 0x80
1009 #define SMBmkdir 0x00 /* create directory */
1010 #define SMBrmdir 0x01 /* delete directory */
1011 #define SMBopen 0x02 /* open file */
1012 #define SMBcreate 0x03 /* create file */
1013 #define SMBclose 0x04 /* close file */
1014 #define SMBflush 0x05 /* flush file */
1015 #define SMBunlink 0x06 /* delete file */
1016 #define SMBmv 0x07 /* rename file */
1017 #define SMBgetatr 0x08 /* get file attributes */
1018 #define SMBsetatr 0x09 /* set file attributes */
1019 #define SMBread 0x0A /* read from file */
1020 #define SMBwrite 0x0B /* write to file */
1021 #define SMBlock 0x0C /* lock byte range */
1022 #define SMBunlock 0x0D /* unlock byte range */
1023 #define SMBctemp 0x0E /* create temporary file */
1024 #define SMBmknew 0x0F /* make new file */
1025 #define SMBcheckpath 0x10 /* check directory path */
1026 #define SMBexit 0x11 /* process exit */
1027 #define SMBlseek 0x12 /* seek */
1028 #define SMBtcon 0x70 /* tree connect */
1029 #define SMBtconX 0x75 /* tree connect and X*/
1030 #define SMBtdis 0x71 /* tree disconnect */
1031 #define SMBnegprot 0x72 /* negotiate protocol */
1032 #define SMBdskattr 0x80 /* get disk attributes */
1033 #define SMBsearch 0x81 /* search directory */
1034 #define SMBsplopen 0xC0 /* open print spool file */
1035 #define SMBsplwr 0xC1 /* write to print spool file */
1036 #define SMBsplclose 0xC2 /* close print spool file */
1037 #define SMBsplretq 0xC3 /* return print queue */
1038 #define SMBsends 0xD0 /* send single block message */
1039 #define SMBsendb 0xD1 /* send broadcast message */
1040 #define SMBfwdname 0xD2 /* forward user name */
1041 #define SMBcancelf 0xD3 /* cancel forward */
1042 #define SMBgetmac 0xD4 /* get machine name */
1043 #define SMBsendstrt 0xD5 /* send start of multi-block message */
1044 #define SMBsendend 0xD6 /* send end of multi-block message */
1045 #define SMBsendtxt 0xD7 /* send text of multi-block message */
1047 /* Core+ protocol */
1048 #define SMBlockread 0x13 /* Lock a range and read */
1049 #define SMBwriteunlock 0x14 /* Unlock a range then write */
1050 #define SMBreadbraw 0x1a /* read a block of data with no smb header */
1051 #define SMBwritebraw 0x1d /* write a block of data with no smb header */
1052 #define SMBwritec 0x20 /* secondary write request */
1053 #define SMBwriteclose 0x2c /* write a file then close it */
1055 /* dos extended protocol */
1056 #define SMBreadBraw 0x1A /* read block raw */
1057 #define SMBreadBmpx 0x1B /* read block multiplexed */
1058 #define SMBreadBs 0x1C /* read block (secondary response) */
1059 #define SMBwriteBraw 0x1D /* write block raw */
1060 #define SMBwriteBmpx 0x1E /* write block multiplexed */
1061 #define SMBwriteBs 0x1F /* write block (secondary request) */
1062 #define SMBwriteC 0x20 /* write complete response */
1063 #define SMBsetattrE 0x22 /* set file attributes expanded */
1064 #define SMBgetattrE 0x23 /* get file attributes expanded */
1065 #define SMBlockingX 0x24 /* lock/unlock byte ranges and X */
1066 #define SMBtrans 0x25 /* transaction - name, bytes in/out */
1067 #define SMBtranss 0x26 /* transaction (secondary request/response) */
1068 #define SMBioctl 0x27 /* IOCTL */
1069 #define SMBioctls 0x28 /* IOCTL (secondary request/response) */
1070 #define SMBcopy 0x29 /* copy */
1071 #define SMBmove 0x2A /* move */
1072 #define SMBecho 0x2B /* echo */
1073 #define SMBopenX 0x2D /* open and X */
1074 #define SMBreadX 0x2E /* read and X */
1075 #define SMBwriteX 0x2F /* write and X */
1076 #define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */
1077 #define SMBffirst 0x82 /* find first */
1078 #define SMBfunique 0x83 /* find unique */
1079 #define SMBfclose 0x84 /* find close */
1080 #define SMBkeepalive 0x85 /* keepalive */
1081 #define SMBinvalid 0xFE /* invalid command */
1083 /* Extended 2.0 protocol */
1084 #define SMBtrans2 0x32 /* TRANS2 protocol set */
1085 #define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */
1086 #define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */
1087 #define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
1088 #define SMBulogoffX 0x74 /* user logoff */
1090 /* NT SMB extensions. */
1091 #define SMBnttrans 0xA0 /* NT transact */
1092 #define SMBnttranss 0xA1 /* NT transact secondary */
1093 #define SMBntcreateX 0xA2 /* NT create and X */
1094 #define SMBntcancel 0xA4 /* NT cancel */
1095 #define SMBntrename 0xA5 /* NT rename */
1097 /* These are the trans subcommands */
1098 #define TRANSACT_SETNAMEDPIPEHANDLESTATE 0x01
1099 #define TRANSACT_DCERPCCMD 0x26
1100 #define TRANSACT_WAITNAMEDPIPEHANDLESTATE 0x53
1102 /* These are the TRANS2 sub commands */
1103 #define TRANSACT2_OPEN 0x00
1104 #define TRANSACT2_FINDFIRST 0x01
1105 #define TRANSACT2_FINDNEXT 0x02
1106 #define TRANSACT2_QFSINFO 0x03
1107 #define TRANSACT2_SETFSINFO 0x04
1108 #define TRANSACT2_QPATHINFO 0x05
1109 #define TRANSACT2_SETPATHINFO 0x06
1110 #define TRANSACT2_QFILEINFO 0x07
1111 #define TRANSACT2_SETFILEINFO 0x08
1112 #define TRANSACT2_FSCTL 0x09
1113 #define TRANSACT2_IOCTL 0x0A
1114 #define TRANSACT2_FINDNOTIFYFIRST 0x0B
1115 #define TRANSACT2_FINDNOTIFYNEXT 0x0C
1116 #define TRANSACT2_MKDIR 0x0D
1117 #define TRANSACT2_SESSION_SETUP 0x0E
1118 #define TRANSACT2_GET_DFS_REFERRAL 0x10
1119 #define TRANSACT2_REPORT_DFS_INCONSISTANCY 0x11
1121 /* These are the NT transact sub commands. */
1122 #define NT_TRANSACT_CREATE 1
1123 #define NT_TRANSACT_IOCTL 2
1124 #define NT_TRANSACT_SET_SECURITY_DESC 3
1125 #define NT_TRANSACT_NOTIFY_CHANGE 4
1126 #define NT_TRANSACT_RENAME 5
1127 #define NT_TRANSACT_QUERY_SECURITY_DESC 6
1128 #define NT_TRANSACT_GET_USER_QUOTA 7
1129 #define NT_TRANSACT_SET_USER_QUOTA 8
1131 /* These are the NT transact_get_user_quota sub commands */
1132 #define TRANSACT_GET_USER_QUOTA_LIST_CONTINUE 0x0000
1133 #define TRANSACT_GET_USER_QUOTA_LIST_START 0x0100
1134 #define TRANSACT_GET_USER_QUOTA_FOR_SID 0x0101
1136 /* Relevant IOCTL codes */
1137 #define IOCTL_QUERY_JOB_INFO 0x530060
1139 /* these are the trans2 sub fields for primary requests */
1140 #define smb_tpscnt smb_vwv0
1141 #define smb_tdscnt smb_vwv1
1142 #define smb_mprcnt smb_vwv2
1143 #define smb_mdrcnt smb_vwv3
1144 #define smb_msrcnt smb_vwv4
1145 #define smb_flags smb_vwv5
1146 #define smb_timeout smb_vwv6
1147 #define smb_pscnt smb_vwv9
1148 #define smb_psoff smb_vwv10
1149 #define smb_dscnt smb_vwv11
1150 #define smb_dsoff smb_vwv12
1151 #define smb_suwcnt smb_vwv13
1152 #define smb_setup smb_vwv14
1153 #define smb_setup0 smb_setup
1154 #define smb_setup1 (smb_setup+2)
1155 #define smb_setup2 (smb_setup+4)
1157 /* these are for the secondary requests */
1158 #define smb_spscnt smb_vwv2
1159 #define smb_spsoff smb_vwv3
1160 #define smb_spsdisp smb_vwv4
1161 #define smb_sdscnt smb_vwv5
1162 #define smb_sdsoff smb_vwv6
1163 #define smb_sdsdisp smb_vwv7
1164 #define smb_sfid smb_vwv8
1166 /* and these for responses */
1167 #define smb_tprcnt smb_vwv0
1168 #define smb_tdrcnt smb_vwv1
1169 #define smb_prcnt smb_vwv3
1170 #define smb_proff smb_vwv4
1171 #define smb_prdisp smb_vwv5
1172 #define smb_drcnt smb_vwv6
1173 #define smb_droff smb_vwv7
1174 #define smb_drdisp smb_vwv8
1176 /* these are for the NT trans primary request. */
1177 #define smb_nt_MaxSetupCount smb_vwv0
1178 #define smb_nt_Flags (smb_vwv0 + 1)
1179 #define smb_nt_TotalParameterCount (smb_vwv0 + 3)
1180 #define smb_nt_TotalDataCount (smb_vwv0 + 7)
1181 #define smb_nt_MaxParameterCount (smb_vwv0 + 11)
1182 #define smb_nt_MaxDataCount (smb_vwv0 + 15)
1183 #define smb_nt_ParameterCount (smb_vwv0 + 19)
1184 #define smb_nt_ParameterOffset (smb_vwv0 + 23)
1185 #define smb_nt_DataCount (smb_vwv0 + 27)
1186 #define smb_nt_DataOffset (smb_vwv0 + 31)
1187 #define smb_nt_SetupCount (smb_vwv0 + 35)
1188 #define smb_nt_Function (smb_vwv0 + 36)
1189 #define smb_nt_SetupStart (smb_vwv0 + 38)
1191 /* these are for the NT trans secondary request. */
1192 #define smb_nts_TotalParameterCount (smb_vwv0 + 3)
1193 #define smb_nts_TotalDataCount (smb_vwv0 + 7)
1194 #define smb_nts_ParameterCount (smb_vwv0 + 11)
1195 #define smb_nts_ParameterOffset (smb_vwv0 + 15)
1196 #define smb_nts_ParameterDisplacement (smb_vwv0 + 19)
1197 #define smb_nts_DataCount (smb_vwv0 + 23)
1198 #define smb_nts_DataOffset (smb_vwv0 + 27)
1199 #define smb_nts_DataDisplacement (smb_vwv0 + 31)
1201 /* these are for the NT trans reply. */
1202 #define smb_ntr_TotalParameterCount (smb_vwv0 + 3)
1203 #define smb_ntr_TotalDataCount (smb_vwv0 + 7)
1204 #define smb_ntr_ParameterCount (smb_vwv0 + 11)
1205 #define smb_ntr_ParameterOffset (smb_vwv0 + 15)
1206 #define smb_ntr_ParameterDisplacement (smb_vwv0 + 19)
1207 #define smb_ntr_DataCount (smb_vwv0 + 23)
1208 #define smb_ntr_DataOffset (smb_vwv0 + 27)
1209 #define smb_ntr_DataDisplacement (smb_vwv0 + 31)
1211 /* these are for the NT create_and_X */
1212 #define smb_ntcreate_NameLength (smb_vwv0 + 5)
1213 #define smb_ntcreate_Flags (smb_vwv0 + 7)
1214 #define smb_ntcreate_RootDirectoryFid (smb_vwv0 + 11)
1215 #define smb_ntcreate_DesiredAccess (smb_vwv0 + 15)
1216 #define smb_ntcreate_AllocationSize (smb_vwv0 + 19)
1217 #define smb_ntcreate_FileAttributes (smb_vwv0 + 27)
1218 #define smb_ntcreate_ShareAccess (smb_vwv0 + 31)
1219 #define smb_ntcreate_CreateDisposition (smb_vwv0 + 35)
1220 #define smb_ntcreate_CreateOptions (smb_vwv0 + 39)
1221 #define smb_ntcreate_ImpersonationLevel (smb_vwv0 + 43)
1222 #define smb_ntcreate_SecurityFlags (smb_vwv0 + 47)
1224 /* this is used on a TConX. I'm not sure the name is very helpful though */
1225 #define SMB_SUPPORT_SEARCH_BITS 0x0001
1226 #define SMB_SHARE_IN_DFS 0x0002
1228 /* Named pipe write mode flags. Used in writeX calls. */
1229 #define PIPE_RAW_MODE 0x4
1230 #define PIPE_START_MESSAGE 0x8
1232 /* File Specific access rights */
1233 #define FILE_READ_DATA 0x00000001
1234 #define FILE_WRITE_DATA 0x00000002
1235 #define FILE_APPEND_DATA 0x00000004
1236 #define FILE_READ_EA 0x00000008 /* File and directory */
1237 #define FILE_WRITE_EA 0x00000010 /* File and directory */
1238 #define FILE_EXECUTE 0x00000020
1239 #define FILE_DELETE_CHILD 0x00000040
1240 #define FILE_READ_ATTRIBUTES 0x00000080
1241 #define FILE_WRITE_ATTRIBUTES 0x00000100
1243 #define FILE_ALL_ACCESS 0x000001FF
1245 /* Directory specific access rights */
1246 #define FILE_LIST_DIRECTORY 0x00000001
1247 #define FILE_ADD_FILE 0x00000002
1248 #define FILE_ADD_SUBDIRECTORY 0x00000004
1249 #define FILE_TRAVERSE 0x00000020
1250 #define FILE_DELETE_CHILD 0x00000040
1252 /* the desired access to use when opening a pipe */
1253 #define DESIRED_ACCESS_PIPE 0x2019f
1255 /* Generic access masks & rights. */
1256 #define DELETE_ACCESS 0x00010000 /* (1L<<16) */
1257 #define READ_CONTROL_ACCESS 0x00020000 /* (1L<<17) */
1258 #define WRITE_DAC_ACCESS 0x00040000 /* (1L<<18) */
1259 #define WRITE_OWNER_ACCESS 0x00080000 /* (1L<<19) */
1260 #define SYNCHRONIZE_ACCESS 0x00100000 /* (1L<<20) */
1262 #define SYSTEM_SECURITY_ACCESS 0x01000000 /* (1L<<24) */
1263 #define MAXIMUM_ALLOWED_ACCESS 0x02000000 /* (1L<<25) */
1264 #define GENERIC_ALL_ACCESS 0x10000000 /* (1<<28) */
1265 #define GENERIC_EXECUTE_ACCESS 0x20000000 /* (1<<29) */
1266 #define GENERIC_WRITE_ACCESS 0x40000000 /* (1<<30) */
1267 #define GENERIC_READ_ACCESS ((unsigned)0x80000000) /* (((unsigned)1)<<31) */
1269 /* Mapping of generic access rights for files to specific rights. */
1271 /* This maps to 0x1F01FF */
1272 #define FILE_GENERIC_ALL (STANDARD_RIGHTS_REQUIRED_ACCESS| SYNCHRONIZE_ACCESS|FILE_ALL_ACCESS)
1274 /* This maps to 0x120089 */
1275 #define FILE_GENERIC_READ (STANDARD_RIGHTS_READ_ACCESS|FILE_READ_DATA|FILE_READ_ATTRIBUTES|\
1276 FILE_READ_EA|SYNCHRONIZE_ACCESS)
1278 /* This maps to 0x120116 */
1279 #define FILE_GENERIC_WRITE (STD_RIGHT_READ_CONTROL_ACCESS|FILE_WRITE_DATA|FILE_WRITE_ATTRIBUTES|\
1280 FILE_WRITE_EA|FILE_APPEND_DATA|SYNCHRONIZE_ACCESS)
1282 #define FILE_GENERIC_EXECUTE (STANDARD_RIGHTS_EXECUTE_ACCESS|\
1283 FILE_EXECUTE|SYNCHRONIZE_ACCESS)
1285 /* Share specific rights. */
1286 #define SHARE_ALL_ACCESS FILE_GENERIC_ALL
1287 #define SHARE_READ_ONLY (FILE_GENERIC_READ|FILE_EXECUTE)
1289 /* Mapping of access rights to UNIX perms. */
1290 #define UNIX_ACCESS_RWX FILE_GENERIC_ALL
1291 #define UNIX_ACCESS_R FILE_GENERIC_READ
1292 #define UNIX_ACCESS_W FILE_GENERIC_WRITE
1293 #define UNIX_ACCESS_X FILE_GENERIC_EXECUTE
1295 /* Mapping of access rights to UNIX perms. for a UNIX directory. */
1296 #define UNIX_DIRECTORY_ACCESS_RWX FILE_GENERIC_ALL
1297 #define UNIX_DIRECTORY_ACCESS_R FILE_GENERIC_READ
1298 #define UNIX_DIRECTORY_ACCESS_W FILE_GENERIC_WRITE
1299 #define UNIX_DIRECTORY_ACCESS_X FILE_GENERIC_EXECUTE
1303 * This is the old mapping we used to use. To get W2KSP2 profiles
1304 * working we need to map to the canonical file perms.
1306 #define UNIX_ACCESS_RWX (UNIX_ACCESS_R|UNIX_ACCESS_W|UNIX_ACCESS_X)
1307 #define UNIX_ACCESS_R (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1308 FILE_READ_ATTRIBUTES|FILE_READ_EA|FILE_READ_DATA)
1309 #define UNIX_ACCESS_W (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1310 FILE_WRITE_ATTRIBUTES|FILE_WRITE_EA|\
1311 FILE_APPEND_DATA|FILE_WRITE_DATA)
1312 #define UNIX_ACCESS_X (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1313 FILE_EXECUTE|FILE_READ_ATTRIBUTES)
1316 #define UNIX_ACCESS_NONE (WRITE_OWNER_ACCESS)
1319 #define REQUEST_OPLOCK 2
1320 #define REQUEST_BATCH_OPLOCK 4
1321 #define OPEN_DIRECTORY 8
1322 #define EXTENDED_RESPONSE_REQUIRED 0x10
1324 /* ShareAccess field. */
1325 #define FILE_SHARE_NONE 0 /* Cannot be used in bitmask. */
1326 #define FILE_SHARE_READ 1
1327 #define FILE_SHARE_WRITE 2
1328 #define FILE_SHARE_DELETE 4
1330 /* FileAttributesField */
1331 #define FILE_ATTRIBUTE_READONLY 0x001L
1332 #define FILE_ATTRIBUTE_HIDDEN 0x002L
1333 #define FILE_ATTRIBUTE_SYSTEM 0x004L
1334 #define FILE_ATTRIBUTE_DIRECTORY 0x010L
1335 #define FILE_ATTRIBUTE_ARCHIVE 0x020L
1336 #define FILE_ATTRIBUTE_NORMAL 0x080L
1337 #define FILE_ATTRIBUTE_TEMPORARY 0x100L
1338 #define FILE_ATTRIBUTE_SPARSE 0x200L
1339 #define FILE_ATTRIBUTE_REPARSE_POINT 0x400L
1340 #define FILE_ATTRIBUTE_COMPRESSED 0x800L
1341 #define FILE_ATTRIBUTE_OFFLINE 0x1000L
1342 #define FILE_ATTRIBUTE_NONINDEXED 0x2000L
1343 #define FILE_ATTRIBUTE_ENCRYPTED 0x4000L
1344 #define SAMBA_ATTRIBUTES_MASK 0x7F
1346 /* Flags - combined with attributes. */
1347 #define FILE_FLAG_WRITE_THROUGH 0x80000000L
1348 #define FILE_FLAG_NO_BUFFERING 0x20000000L
1349 #define FILE_FLAG_RANDOM_ACCESS 0x10000000L
1350 #define FILE_FLAG_SEQUENTIAL_SCAN 0x08000000L
1351 #define FILE_FLAG_DELETE_ON_CLOSE 0x04000000L
1352 #define FILE_FLAG_BACKUP_SEMANTICS 0x02000000L
1353 #define FILE_FLAG_POSIX_SEMANTICS 0x01000000L
1355 /* CreateDisposition field. */
1356 #define FILE_SUPERSEDE 0 /* File exists overwrite/supersede. File not exist create. */
1357 #define FILE_OPEN 1 /* File exists open. File not exist fail. */
1358 #define FILE_CREATE 2 /* File exists fail. File not exist create. */
1359 #define FILE_OPEN_IF 3 /* File exists open. File not exist create. */
1360 #define FILE_OVERWRITE 4 /* File exists overwrite. File not exist fail. */
1361 #define FILE_OVERWRITE_IF 5 /* File exists overwrite. File not exist create. */
1363 /* CreateOptions field. */
1364 #define FILE_DIRECTORY_FILE 0x0001
1365 #define FILE_WRITE_THROUGH 0x0002
1366 #define FILE_SEQUENTIAL_ONLY 0x0004
1367 #define FILE_NON_DIRECTORY_FILE 0x0040
1368 #define FILE_NO_EA_KNOWLEDGE 0x0200
1369 #define FILE_EIGHT_DOT_THREE_ONLY 0x0400
1370 #define FILE_RANDOM_ACCESS 0x0800
1371 #define FILE_DELETE_ON_CLOSE 0x1000
1372 #define FILE_OPEN_BY_FILE_ID 0x2000
1374 /* Private create options used by the ntcreatex processing code. From Samba4. */
1375 #define NTCREATEX_OPTIONS_PRIVATE_DENY_DOS 0x01000000
1376 #define NTCREATEX_OPTIONS_PRIVATE_DENY_FCB 0x02000000
1378 /* Responses when opening a file. */
1379 #define FILE_WAS_SUPERSEDED 0
1380 #define FILE_WAS_OPENED 1
1381 #define FILE_WAS_CREATED 2
1382 #define FILE_WAS_OVERWRITTEN 3
1384 /* File type flags */
1385 #define FILE_TYPE_DISK 0
1386 #define FILE_TYPE_BYTE_MODE_PIPE 1
1387 #define FILE_TYPE_MESSAGE_MODE_PIPE 2
1388 #define FILE_TYPE_PRINTER 3
1389 #define FILE_TYPE_COMM_DEVICE 4
1390 #define FILE_TYPE_UNKNOWN 0xFFFF
1392 /* Flag for NT transact rename call. */
1393 #define RENAME_REPLACE_IF_EXISTS 1
1395 /* flags for SMBntrename call (from Samba4) */
1396 #define RENAME_FLAG_MOVE_CLUSTER_INFORMATION 0x102 /* ???? */
1397 #define RENAME_FLAG_HARD_LINK 0x103
1398 #define RENAME_FLAG_RENAME 0x104
1399 #define RENAME_FLAG_COPY 0x105
1401 /* Filesystem Attributes. */
1402 #define FILE_CASE_SENSITIVE_SEARCH 0x00000001
1403 #define FILE_CASE_PRESERVED_NAMES 0x00000002
1404 #define FILE_UNICODE_ON_DISK 0x00000004
1405 /* According to cifs9f, this is 4, not 8 */
1406 /* Acconding to testing, this actually sets the security attribute! */
1407 #define FILE_PERSISTENT_ACLS 0x00000008
1408 #define FILE_FILE_COMPRESSION 0x00000010
1409 #define FILE_VOLUME_QUOTAS 0x00000020
1410 #define FILE_SUPPORTS_SPARSE_FILES 0x00000040
1411 #define FILE_SUPPORTS_REPARSE_POINTS 0x00000080
1412 #define FILE_SUPPORTS_REMOTE_STORAGE 0x00000100
1413 #define FS_LFN_APIS 0x00004000
1414 #define FILE_VOLUME_IS_COMPRESSED 0x00008000
1415 #define FILE_SUPPORTS_OBJECT_IDS 0x00010000
1416 #define FILE_SUPPORTS_ENCRYPTION 0x00020000
1417 #define FILE_NAMED_STREAMS 0x00040000
1418 #define FILE_READ_ONLY_VOLUME 0x00080000
1420 /* ChangeNotify flags. */
1421 #define FILE_NOTIFY_CHANGE_FILE_NAME 0x001
1422 #define FILE_NOTIFY_CHANGE_DIR_NAME 0x002
1423 #define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x004
1424 #define FILE_NOTIFY_CHANGE_SIZE 0x008
1425 #define FILE_NOTIFY_CHANGE_LAST_WRITE 0x010
1426 #define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x020
1427 #define FILE_NOTIFY_CHANGE_CREATION 0x040
1428 #define FILE_NOTIFY_CHANGE_EA 0x080
1429 #define FILE_NOTIFY_CHANGE_SECURITY 0x100
1430 #define FILE_NOTIFY_CHANGE_STREAM_NAME 0x00000200
1431 #define FILE_NOTIFY_CHANGE_STREAM_SIZE 0x00000400
1432 #define FILE_NOTIFY_CHANGE_STREAM_WRITE 0x00000800
1434 #define FILE_NOTIFY_CHANGE_NAME \
1435 (FILE_NOTIFY_CHANGE_FILE_NAME|FILE_NOTIFY_CHANGE_DIR_NAME)
1437 /* change notify action results */
1438 #define NOTIFY_ACTION_ADDED 1
1439 #define NOTIFY_ACTION_REMOVED 2
1440 #define NOTIFY_ACTION_MODIFIED 3
1441 #define NOTIFY_ACTION_OLD_NAME 4
1442 #define NOTIFY_ACTION_NEW_NAME 5
1443 #define NOTIFY_ACTION_ADDED_STREAM 6
1444 #define NOTIFY_ACTION_REMOVED_STREAM 7
1445 #define NOTIFY_ACTION_MODIFIED_STREAM 8
1448 /* where to find the base of the SMB packet proper */
1449 #define smb_base(buf) (((char *)(buf))+4)
1451 /* we don't allow server strings to be longer than 48 characters as
1452 otherwise NT will not honour the announce packets */
1453 #define MAX_SERVER_STRING_LENGTH 48
1456 #define SMB_SUCCESS 0 /* The request was successful. */
1459 void dfs_unlogin(void);
1460 extern int dcelogin_atmost_once;
1464 char *strdup(char *s);
1468 #define SIGNAL_CAST (RETSIGTYPE (*)(int))
1475 /* This was set by JHT in liaison with Jeremy Allison early 1997
1477 * Version 4.0 - never made public
1478 * Version 4.10 - New to 1.9.16p2, lost in space 1.9.16p3 to 1.9.16p9
1479 * - Reappeared in 1.9.16p11 with fixed smbd services
1480 * Version 4.20 - To indicate that nmbd and browsing now works better
1481 * Version 4.50 - Set at release of samba-2.2.0 by JHT
1483 * Note: In the presence of NT4.X do not set above 4.9
1484 * Setting this above 4.9 can have undesired side-effects.
1485 * This may change again in Samba-3.0 after further testing. JHT
1488 #define DEFAULT_MAJOR_VERSION 0x04
1489 #define DEFAULT_MINOR_VERSION 0x09
1491 /* Browser Election Values */
1492 #define BROWSER_ELECTION_VERSION 0x010f
1493 #define BROWSER_CONSTANT 0xaa55
1495 /* Sercurity mode bits. */
1496 #define NEGOTIATE_SECURITY_USER_LEVEL 0x01
1497 #define NEGOTIATE_SECURITY_CHALLENGE_RESPONSE 0x02
1498 #define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04
1499 #define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08
1501 /* NT Flags2 bits - cifs6.txt section 3.1.2 */
1503 #define FLAGS2_LONG_PATH_COMPONENTS 0x0001
1504 #define FLAGS2_EXTENDED_ATTRIBUTES 0x0002
1505 #define FLAGS2_SMB_SECURITY_SIGNATURES 0x0004
1506 #define FLAGS2_UNKNOWN_BIT4 0x0010
1507 #define FLAGS2_IS_LONG_NAME 0x0040
1508 #define FLAGS2_EXTENDED_SECURITY 0x0800
1509 #define FLAGS2_DFS_PATHNAMES 0x1000
1510 #define FLAGS2_READ_PERMIT_EXECUTE 0x2000
1511 #define FLAGS2_32_BIT_ERROR_CODES 0x4000
1512 #define FLAGS2_UNICODE_STRINGS 0x8000
1514 #define FLAGS2_WIN2K_SIGNATURE 0xC852 /* Hack alert ! For now... JRA. */
1516 /* TCONX Flag (smb_vwv2). */
1517 #define TCONX_FLAG_EXTENDED_RESPONSE 0x8
1519 /* Capabilities. see ftp.microsoft.com/developr/drg/cifs/cifs/cifs4.txt */
1521 #define CAP_RAW_MODE 0x0001
1522 #define CAP_MPX_MODE 0x0002
1523 #define CAP_UNICODE 0x0004
1524 #define CAP_LARGE_FILES 0x0008
1525 #define CAP_NT_SMBS 0x0010
1526 #define CAP_RPC_REMOTE_APIS 0x0020
1527 #define CAP_STATUS32 0x0040
1528 #define CAP_LEVEL_II_OPLOCKS 0x0080
1529 #define CAP_LOCK_AND_READ 0x0100
1530 #define CAP_NT_FIND 0x0200
1531 #define CAP_DFS 0x1000
1532 #define CAP_W2K_SMBS 0x2000
1533 #define CAP_LARGE_READX 0x4000
1534 #define CAP_LARGE_WRITEX 0x8000
1535 #define CAP_UNIX 0x800000 /* Capabilities for UNIX extensions. Created by HP. */
1536 #define CAP_EXTENDED_SECURITY 0x80000000
1538 /* protocol types. It assumes that higher protocols include lower protocols
1540 enum protocol_types {PROTOCOL_NONE,PROTOCOL_CORE,PROTOCOL_COREPLUS,PROTOCOL_LANMAN1,PROTOCOL_LANMAN2,PROTOCOL_NT1};
1542 /* security levels */
1543 enum security_types {SEC_SHARE,SEC_USER,SEC_SERVER,SEC_DOMAIN,SEC_ADS};
1553 /* printing types */
1554 enum printing_types {PRINT_BSD,PRINT_SYSV,PRINT_AIX,PRINT_HPUX,
1555 PRINT_QNX,PRINT_PLP,PRINT_LPRNG,PRINT_SOFTQ,
1556 PRINT_CUPS,PRINT_LPRNT,PRINT_LPROS2,PRINT_IPRINT
1557 #if defined(DEVELOPER) || defined(ENABLE_BUILD_FARM_HACKS)
1558 ,PRINT_TEST,PRINT_VLP
1559 #endif /* DEVELOPER */
1562 /* LDAP schema types */
1563 enum schema_types {SCHEMA_COMPAT, SCHEMA_AD, SCHEMA_SAMBA};
1565 /* LDAP SSL options */
1566 enum ldap_ssl_types {LDAP_SSL_ON, LDAP_SSL_OFF, LDAP_SSL_START_TLS};
1568 /* LDAP PASSWD SYNC methods */
1569 enum ldap_passwd_sync_types {LDAP_PASSWD_SYNC_ON, LDAP_PASSWD_SYNC_OFF, LDAP_PASSWD_SYNC_ONLY};
1571 /* Remote architectures we know about. */
1572 enum remote_arch_types {RA_UNKNOWN, RA_WFWG, RA_OS2, RA_WIN95, RA_WINNT,
1573 RA_WIN2K, RA_WINXP, RA_WIN2K3, RA_VISTA,
1574 RA_SAMBA, RA_CIFSFS};
1577 enum case_handling {CASE_LOWER,CASE_UPPER};
1579 /* ACL compatibility */
1580 enum acl_compatibility {ACL_COMPAT_AUTO, ACL_COMPAT_WINNT, ACL_COMPAT_WIN2K};
1582 * Global value meaing that the smb_uid field should be
1583 * ingored (in share level security and protocol level == CORE)
1586 #define UID_FIELD_INVALID 0
1587 #define VUID_OFFSET 100 /* Amount to bias returned vuid numbers */
1590 * Size of buffer to use when moving files across filesystems.
1592 #define COPYBUF_SIZE (8*1024)
1595 * Used in chaining code.
1597 extern int chain_size;
1600 * Map the Core and Extended Oplock requesst bits down
1601 * to common bits (EXCLUSIVE_OPLOCK & BATCH_OPLOCK).
1607 #define CORE_OPLOCK_REQUEST(inbuf) \
1608 ((CVAL(inbuf,smb_flg)&(FLAG_REQUEST_OPLOCK|FLAG_REQUEST_BATCH_OPLOCK))>>5)
1611 * Extended protocol.
1613 #define EXTENDED_OPLOCK_REQUEST(inbuf) ((SVAL(inbuf,smb_vwv2)&((1<<1)|(1<<2)))>>1)
1616 #define LOCKING_ANDX_SHARED_LOCK 0x1
1617 #define LOCKING_ANDX_OPLOCK_RELEASE 0x2
1618 #define LOCKING_ANDX_CHANGE_LOCKTYPE 0x4
1619 #define LOCKING_ANDX_CANCEL_LOCK 0x8
1620 #define LOCKING_ANDX_LARGE_FILES 0x10
1623 * Bits we test with.
1624 * Note these must fit into 16-bits.
1627 #define NO_OPLOCK 0x0
1628 #define EXCLUSIVE_OPLOCK 0x1
1629 #define BATCH_OPLOCK 0x2
1630 #define LEVEL_II_OPLOCK 0x4
1632 /* The following are Samba-private. */
1633 #define INTERNAL_OPEN_ONLY 0x8
1634 #define FAKE_LEVEL_II_OPLOCK 0x10 /* Client requested no_oplock, but we have to
1635 * inform potential level2 holders on
1637 #define DEFERRED_OPEN_ENTRY 0x20
1638 #define UNUSED_SHARE_MODE_ENTRY 0x40
1639 #define FORCE_OPLOCK_BREAK_TO_NONE 0x80
1641 /* None of the following should ever appear in fsp->oplock_request. */
1642 #define SAMBA_PRIVATE_OPLOCK_MASK (INTERNAL_OPEN_ONLY|DEFERRED_OPEN_ENTRY|UNUSED_SHARE_MODE_ENTRY|FORCE_OPLOCK_BREAK_TO_NONE)
1644 #define EXCLUSIVE_OPLOCK_TYPE(lck) ((lck) & ((unsigned int)EXCLUSIVE_OPLOCK|(unsigned int)BATCH_OPLOCK))
1645 #define BATCH_OPLOCK_TYPE(lck) ((lck) & (unsigned int)BATCH_OPLOCK)
1646 #define LEVEL_II_OPLOCK_TYPE(lck) ((lck) & ((unsigned int)LEVEL_II_OPLOCK|(unsigned int)FAKE_LEVEL_II_OPLOCK))
1648 struct inform_level2_message {
1652 unsigned long target_file_id;
1653 unsigned long source_file_id;
1656 /* kernel_oplock_message definition.
1658 struct kernel_oplock_message {
1661 unsigned long file_id;
1665 0 SMB_DEV_T dev 8 bytes.
1666 8 SMB_INO_T inode 8 bytes
1667 16 unsigned long file_id 4 bytes
1671 #define MSG_SMB_KERNEL_BREAK_SIZE 20
1673 /* file_renamed_message definition.
1675 struct file_renamed_message {
1678 char names[1]; A variable area containing sharepath and filename.
1682 0 SMB_DEV_T dev 8 bytes.
1683 8 SMB_INO_T inode 8 bytes
1684 16 char [] name zero terminated namelen bytes
1685 minimum length == 18.
1689 #define MSG_FILE_RENAMED_MIN_SIZE 16
1692 * On the wire return values for oplock types.
1695 #define CORE_OPLOCK_GRANTED (1<<5)
1696 #define EXTENDED_OPLOCK_GRANTED (1<<15)
1698 #define NO_OPLOCK_RETURN 0
1699 #define EXCLUSIVE_OPLOCK_RETURN 1
1700 #define BATCH_OPLOCK_RETURN 2
1701 #define LEVEL_II_OPLOCK_RETURN 3
1704 #define OPLOCKLEVEL_NONE 0
1705 #define OPLOCKLEVEL_II 1
1708 * Capabilities abstracted for different systems.
1711 enum smbd_capability {
1712 KERNEL_OPLOCK_CAPABILITY,
1713 DMAPI_ACCESS_CAPABILITY
1716 /* if a kernel does support oplocks then a structure of the following
1717 typee is used to describe how to interact with the kernel */
1718 struct kernel_oplocks {
1719 files_struct * (*receive_message)(fd_set *fds);
1720 bool (*set_oplock)(files_struct *fsp, int oplock_type);
1721 void (*release_oplock)(files_struct *fsp);
1722 bool (*msg_waiting)(fd_set *fds);
1723 int notification_fd;
1726 #include "smb_macros.h"
1728 #define MAX_NETBIOSNAME_LEN 16
1729 /* DOS character, NetBIOS namestring. Type used on the wire. */
1730 typedef char nstring[MAX_NETBIOSNAME_LEN];
1731 /* Unix character, NetBIOS namestring. Type used to manipulate name in nmbd. */
1732 typedef char unstring[MAX_NETBIOSNAME_LEN*4];
1734 /* A netbios name structure. */
1738 unsigned int name_type;
1741 /* A netbios node status array element. */
1742 typedef struct node_status_ {
1745 unsigned char flags;
1746 } NODE_STATUS_STRUCT;
1748 /* The extra info from a NetBIOS node status query */
1749 struct node_status_extra {
1750 unsigned char mac_addr[6];
1751 /* There really is more here ... */
1761 /* For split krb5 SPNEGO blobs. */
1762 struct pending_auth_data {
1763 struct pending_auth_data *prev, *next;
1764 uint16 vuid; /* Tag for this entry. */
1765 uint16 smbpid; /* Alternate tag for this entry. */
1767 DATA_BLOB partial_data;
1770 typedef struct user_struct {
1771 struct user_struct *next, *prev;
1772 uint16 vuid; /* Tag for this entry. */
1773 uid_t uid; /* uid of a validated user */
1774 gid_t gid; /* gid of a validated user */
1776 userdom_struct user;
1777 const char *homedir;
1778 const char *unix_homedir;
1779 const char *logon_script;
1783 /* following groups stuff added by ih */
1784 /* This groups info is needed for when we become_user() for this uid */
1788 NT_USER_TOKEN *nt_user_token;
1790 DATA_BLOB session_key;
1792 char *session_keystr; /* used by utmp and pam session code.
1796 struct auth_serversupplied_info *server_info;
1798 struct auth_ntlmssp_state *auth_ntlmssp_state;
1801 struct unix_error_map {
1809 * Size of new password account encoding string. This is enough space to
1810 * hold 11 ACB characters, plus the surrounding [] and a terminating null.
1811 * Do not change unless you are adding new ACB bits!
1814 #define NEW_PW_FORMAT_SPACE_PADDED_LEN 14
1817 Do you want session setups at user level security with a invalid
1818 password to be rejected or allowed in as guest? WinNT rejects them
1819 but it can be a pain as it means "net view" needs to use a password
1821 You have 3 choices in the setting of map_to_guest:
1823 "NEVER_MAP_TO_GUEST" means session setups with an invalid password
1824 are rejected. This is the default.
1826 "MAP_TO_GUEST_ON_BAD_USER" means session setups with an invalid password
1827 are rejected, unless the username does not exist, in which case it
1828 is treated as a guest login
1830 "MAP_TO_GUEST_ON_BAD_PASSWORD" means session setups with an invalid password
1831 are treated as a guest login
1833 Note that map_to_guest only has an effect in user or server
1837 #define NEVER_MAP_TO_GUEST 0
1838 #define MAP_TO_GUEST_ON_BAD_USER 1
1839 #define MAP_TO_GUEST_ON_BAD_PASSWORD 2
1840 #define MAP_TO_GUEST_ON_BAD_UID 3
1842 #define SAFE_NETBIOS_CHARS ". -_"
1844 /* generic iconv conversion structure */
1845 typedef struct _smb_iconv_t {
1846 size_t (*direct)(void *cd, const char **inbuf, size_t *inbytesleft,
1847 char **outbuf, size_t *outbytesleft);
1848 size_t (*pull)(void *cd, const char **inbuf, size_t *inbytesleft,
1849 char **outbuf, size_t *outbytesleft);
1850 size_t (*push)(void *cd, const char **inbuf, size_t *inbytesleft,
1851 char **outbuf, size_t *outbytesleft);
1852 void *cd_direct, *cd_pull, *cd_push;
1853 char *from_name, *to_name;
1856 /* The maximum length of a trust account password.
1857 Used when we randomly create it, 15 char passwords
1858 exceed NT4's max password length */
1860 #define DEFAULT_TRUST_ACCOUNT_PASSWORD_LENGTH 14
1862 #include "popt_common.h"
1866 #define LDAP_PORT 389
1869 /* used by the IP comparison function */
1871 struct sockaddr_storage ss;
1875 /* Special name type used to cause a _kerberos DNS lookup. */
1876 #define KDC_NAME_TYPE 0xDCDC
1878 /* Used by the SMB signing functions. */
1880 typedef struct smb_sign_info {
1881 void (*sign_outgoing_message)(char *outbuf, struct smb_sign_info *si);
1882 bool (*check_incoming_message)(const char *inbuf, struct smb_sign_info *si, bool must_be_ok);
1883 void (*free_signing_context)(struct smb_sign_info *si);
1884 void *signing_context;
1886 bool negotiated_smb_signing;
1887 bool allow_smb_signing;
1889 bool mandatory_signing;
1890 bool seen_valid; /* Have I ever seen a validly signed packet? */
1900 struct ea_list *next, *prev;
1901 struct ea_struct ea;
1904 /* EA names used internally in Samba. KEEP UP TO DATE with prohibited_ea_names in trans2.c !. */
1905 #define SAMBA_POSIX_INHERITANCE_EA_NAME "user.SAMBA_PAI"
1906 /* EA to use for DOS attributes */
1907 #define SAMBA_XATTR_DOS_ATTRIB "user.DOSATTRIB"
1909 #define UUID_SIZE 16
1911 #define UUID_FLAT_SIZE 16
1912 typedef struct uuid_flat {
1913 uint8 info[UUID_FLAT_SIZE];
1916 /* map readonly options */
1917 enum mapreadonly_options {MAP_READONLY_NO, MAP_READONLY_YES, MAP_READONLY_PERMISSIONS};
1919 /* usershare error codes. */
1920 enum usershare_err {
1922 USERSHARE_MALFORMED_FILE,
1923 USERSHARE_BAD_VERSION,
1924 USERSHARE_MALFORMED_PATH,
1925 USERSHARE_MALFORMED_COMMENT_DEF,
1926 USERSHARE_MALFORMED_ACL_DEF,
1928 USERSHARE_PATH_NOT_ABSOLUTE,
1929 USERSHARE_PATH_IS_DENIED,
1930 USERSHARE_PATH_NOT_ALLOWED,
1931 USERSHARE_PATH_NOT_DIRECTORY,
1935 /* Different reasons for closing a file. */
1936 enum file_close_type {NORMAL_CLOSE=0,SHUTDOWN_CLOSE,ERROR_CLOSE};