2 * Unix SMB/CIFS implementation.
3 * RPC Pipe client / server routines
4 * Almost completely rewritten by (C) Jeremy Allison 2005 - 2010
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, see <http://www.gnu.org/licenses/>.
20 /* this module apparently provides an implementation of DCE/RPC over a
21 * named pipe (IPC$ connection using SMBtrans). details of DCE/RPC
22 * documentation are available (in on-line form) from the X-Open group.
24 * this module should provide a level of abstraction between SMB
25 * and DCE/RPC, while minimising the amount of mallocs, unnecessary
26 * data copies, and network traffic.
31 #include "system/filesys.h"
32 #include "srv_pipe_internal.h"
33 #include "../librpc/gen_ndr/ndr_schannel.h"
34 #include "../libcli/auth/schannel.h"
35 #include "../libcli/auth/spnego.h"
36 #include "dcesrv_auth_generic.h"
37 #include "dcesrv_gssapi.h"
38 #include "dcesrv_spnego.h"
39 #include "rpc_server.h"
41 #include "smbd/smbd.h"
44 #include "rpc_server/srv_pipe.h"
45 #include "rpc_server/rpc_contexts.h"
46 #include "lib/param/param.h"
49 #define DBGC_CLASS DBGC_RPC_SRV
52 * Dump everything from the start of the end up of the provided data
53 * into a file, but only at debug level >= 50
55 static void dump_pdu_region(const char *name, int v,
56 DATA_BLOB *data, size_t start, size_t end)
62 if (DEBUGLEVEL < 50) return;
64 if (start > data->length || end > data->length || start > end) return;
66 for (i = 1; i < 100; i++) {
68 fname = talloc_asprintf(talloc_tos(),
72 fname = talloc_asprintf(talloc_tos(),
79 fd = open(fname, O_WRONLY|O_CREAT|O_EXCL, 0644);
80 if (fd != -1 || errno != EEXIST) break;
83 sz = write(fd, data->data + start, end - start);
85 if ((sz != end - start) || (i != 0) ) {
86 DEBUG(0, ("Error writing/closing %s: %ld!=%ld %d\n",
87 fname, (unsigned long)sz,
88 (unsigned long)end - start, i));
90 DEBUG(0,("created %s\n", fname));
96 static DATA_BLOB generic_session_key(void)
98 return data_blob_const("SystemLibraryDTC", 16);
101 /*******************************************************************
102 Generate the next PDU to be returned from the data.
103 ********************************************************************/
105 static NTSTATUS create_next_packet(TALLOC_CTX *mem_ctx,
106 struct pipe_auth_data *auth,
109 size_t data_sent_length,
113 union dcerpc_payload u;
122 ZERO_STRUCT(u.response);
124 /* Set up rpc packet pfc flags. */
125 if (data_sent_length == 0) {
126 pfc_flags = DCERPC_PFC_FLAG_FIRST;
131 /* Work out how much we can fit in a single PDU. */
132 data_left = rdata->length - data_sent_length;
134 /* Ensure there really is data left to send. */
136 DEBUG(0, ("No data left to send !\n"));
137 return NT_STATUS_BUFFER_TOO_SMALL;
140 status = dcerpc_guess_sizes(auth,
141 DCERPC_RESPONSE_LENGTH,
143 RPC_MAX_PDU_FRAG_LEN,
144 SERVER_NDR_PADDING_SIZE,
145 &data_to_send, &frag_len,
146 &auth_len, &pad_len);
147 if (!NT_STATUS_IS_OK(status)) {
151 /* Set up the alloc hint. This should be the data left to send. */
152 u.response.alloc_hint = data_left;
154 /* Work out if this PDU will be the last. */
155 if (data_sent_length + data_to_send >= rdata->length) {
156 pfc_flags |= DCERPC_PFC_FLAG_LAST;
159 /* Prepare data to be NDR encoded. */
160 u.response.stub_and_verifier =
161 data_blob_const(rdata->data + data_sent_length, data_to_send);
163 /* Store the packet in the data stream. */
164 status = dcerpc_push_ncacn_packet(mem_ctx, DCERPC_PKT_RESPONSE,
165 pfc_flags, auth_len, call_id,
167 if (!NT_STATUS_IS_OK(status)) {
168 DEBUG(0, ("Failed to marshall RPC Packet.\n"));
173 /* Set the proper length on the pdu, including padding.
174 * Only needed if an auth trailer will be appended. */
175 dcerpc_set_frag_length(frag, frag->length
177 + DCERPC_AUTH_TRAILER_LENGTH
182 status = dcerpc_add_auth_footer(auth, pad_len, frag);
183 if (!NT_STATUS_IS_OK(status)) {
184 data_blob_free(frag);
189 *pdu_size = data_to_send;
193 /*******************************************************************
194 Generate the next PDU to be returned from the data in p->rdata.
195 ********************************************************************/
197 bool create_next_pdu(struct pipes_struct *p)
203 * If we're in the fault state, keep returning fault PDU's until
204 * the pipe gets closed. JRA.
206 if (p->fault_state) {
207 setup_fault_pdu(p, NT_STATUS(DCERPC_FAULT_OP_RNG_ERROR));
211 status = create_next_packet(p->mem_ctx, &p->auth,
212 p->call_id, &p->out_data.rdata,
213 p->out_data.data_sent_length,
214 &p->out_data.frag, &pdu_size);
215 if (!NT_STATUS_IS_OK(status)) {
216 DEBUG(0, ("Failed to create packet with error %s, "
217 "(auth level %u / type %u)\n",
219 (unsigned int)p->auth.auth_level,
220 (unsigned int)p->auth.auth_type));
224 /* Setup the counts for this PDU. */
225 p->out_data.data_sent_length += pdu_size;
226 p->out_data.current_pdu_sent = 0;
231 static bool pipe_init_outgoing_data(struct pipes_struct *p);
233 /*******************************************************************
234 Marshall a bind_nak pdu.
235 *******************************************************************/
237 static bool setup_bind_nak(struct pipes_struct *p, struct ncacn_packet *pkt)
240 union dcerpc_payload u;
242 /* Free any memory in the current return data buffer. */
243 pipe_init_outgoing_data(p);
246 * Initialize a bind_nak header.
251 u.bind_nak.reject_reason = 0;
254 * Marshall directly into the outgoing PDU space. We
255 * must do this as we need to set to the bind response
256 * header and are never sending more than one PDU here.
259 status = dcerpc_push_ncacn_packet(p->mem_ctx,
261 DCERPC_PFC_FLAG_FIRST |
262 DCERPC_PFC_FLAG_LAST,
267 if (!NT_STATUS_IS_OK(status)) {
271 p->out_data.data_sent_length = 0;
272 p->out_data.current_pdu_sent = 0;
274 TALLOC_FREE(p->auth.auth_ctx);
275 p->auth.auth_level = DCERPC_AUTH_LEVEL_NONE;
276 p->auth.auth_type = DCERPC_AUTH_TYPE_NONE;
277 p->pipe_bound = False;
282 /*******************************************************************
283 Marshall a fault pdu.
284 *******************************************************************/
286 bool setup_fault_pdu(struct pipes_struct *p, NTSTATUS fault_status)
289 union dcerpc_payload u;
291 /* Free any memory in the current return data buffer. */
292 pipe_init_outgoing_data(p);
295 * Initialize a fault header.
300 u.fault.status = NT_STATUS_V(fault_status);
301 u.fault._pad = data_blob_talloc_zero(p->mem_ctx, 4);
304 * Marshall directly into the outgoing PDU space. We
305 * must do this as we need to set to the bind response
306 * header and are never sending more than one PDU here.
309 status = dcerpc_push_ncacn_packet(p->mem_ctx,
311 DCERPC_PFC_FLAG_FIRST |
312 DCERPC_PFC_FLAG_LAST |
313 DCERPC_PFC_FLAG_DID_NOT_EXECUTE,
318 if (!NT_STATUS_IS_OK(status)) {
322 p->out_data.data_sent_length = 0;
323 p->out_data.current_pdu_sent = 0;
328 /*******************************************************************
329 Ensure a bind request has the correct abstract & transfer interface.
330 Used to reject unknown binds from Win2k.
331 *******************************************************************/
333 static bool check_bind_req(struct pipes_struct *p,
334 struct ndr_syntax_id* abstract,
335 struct ndr_syntax_id* transfer,
338 struct pipe_rpc_fns *context_fns;
341 DEBUG(3,("check_bind_req for %s\n",
342 get_pipe_name_from_syntax(talloc_tos(), abstract)));
344 /* we have to check all now since win2k introduced a new UUID on the lsaprpc pipe */
345 if (rpc_srv_pipe_exists_by_id(abstract) &&
346 ndr_syntax_id_equal(transfer, &ndr_transfer_syntax)) {
347 DEBUG(3, ("check_bind_req: %s -> %s rpc service\n",
348 rpc_srv_get_pipe_cli_name(abstract),
349 rpc_srv_get_pipe_srv_name(abstract)));
354 ok = init_pipe_handles(p, abstract);
356 DEBUG(1, ("Failed to init pipe handles!\n"));
360 context_fns = talloc(p, struct pipe_rpc_fns);
361 if (context_fns == NULL) {
362 DEBUG(0,("check_bind_req: talloc() failed!\n"));
366 context_fns->next = context_fns->prev = NULL;
367 context_fns->n_cmds = rpc_srv_get_pipe_num_cmds(abstract);
368 context_fns->cmds = rpc_srv_get_pipe_cmds(abstract);
369 context_fns->context_id = context_id;
370 context_fns->syntax = *abstract;
372 /* add to the list of open contexts */
374 DLIST_ADD( p->contexts, context_fns );
380 * Is a named pipe known?
381 * @param[in] cli_filename The pipe name requested by the client
382 * @result Do we want to serve this?
384 bool is_known_pipename(const char *cli_filename, struct ndr_syntax_id *syntax)
386 const char *pipename = cli_filename;
389 if (strnequal(pipename, "\\PIPE\\", 6)) {
393 if (*pipename == '\\') {
397 if (lp_disable_spoolss() && strequal(pipename, "spoolss")) {
398 DEBUG(10, ("refusing spoolss access\n"));
402 if (rpc_srv_get_pipe_interface_by_cli_name(pipename, syntax)) {
406 status = smb_probe_module("rpc", pipename);
407 if (!NT_STATUS_IS_OK(status)) {
408 DEBUG(10, ("is_known_pipename: %s unknown\n", cli_filename));
411 DEBUG(10, ("is_known_pipename: %s loaded dynamically\n", pipename));
414 * Scan the list again for the interface id
416 if (rpc_srv_get_pipe_interface_by_cli_name(pipename, syntax)) {
420 DEBUG(10, ("is_known_pipename: pipe %s did not register itself!\n",
426 /*******************************************************************
427 Handle the first part of a SPNEGO bind auth.
428 *******************************************************************/
430 static bool pipe_spnego_auth_bind(struct pipes_struct *p,
432 struct dcerpc_auth *auth_info,
435 struct spnego_context *spnego_ctx;
438 status = spnego_server_auth_start(p,
439 (auth_info->auth_level ==
440 DCERPC_AUTH_LEVEL_INTEGRITY),
441 (auth_info->auth_level ==
442 DCERPC_AUTH_LEVEL_PRIVACY),
444 &auth_info->credentials,
448 if (!NT_STATUS_IS_OK(status)) {
449 DEBUG(0, ("Failed SPNEGO negotiate (%s)\n",
454 /* Make sure data is bound to the memctx, to be freed the caller */
455 talloc_steal(mem_ctx, response->data);
457 p->auth.auth_ctx = spnego_ctx;
458 p->auth.auth_type = DCERPC_AUTH_TYPE_SPNEGO;
460 DEBUG(10, ("SPNEGO auth started\n"));
465 /*******************************************************************
466 Handle an schannel bind auth.
467 *******************************************************************/
469 static bool pipe_schannel_auth_bind(struct pipes_struct *p,
471 struct dcerpc_auth *auth_info,
474 struct NL_AUTH_MESSAGE neg;
475 struct NL_AUTH_MESSAGE reply;
478 struct netlogon_creds_CredentialState *creds;
479 enum ndr_err_code ndr_err;
480 struct schannel_state *schannel_auth;
481 struct loadparm_context *lp_ctx;
483 ndr_err = ndr_pull_struct_blob(
484 &auth_info->credentials, mem_ctx, &neg,
485 (ndr_pull_flags_fn_t)ndr_pull_NL_AUTH_MESSAGE);
486 if (!NDR_ERR_CODE_IS_SUCCESS(ndr_err)) {
487 DEBUG(0,("pipe_schannel_auth_bind: Could not unmarshal SCHANNEL auth neg\n"));
491 if (DEBUGLEVEL >= 10) {
492 NDR_PRINT_DEBUG(NL_AUTH_MESSAGE, &neg);
495 if (!(neg.Flags & NL_FLAG_OEM_NETBIOS_COMPUTER_NAME)) {
496 DEBUG(0,("pipe_schannel_auth_bind: Did not receive netbios computer name\n"));
500 lp_ctx = loadparm_init_s3(p, loadparm_s3_context());
502 DEBUG(0,("pipe_schannel_auth_bind: loadparm_init_s3() failed!\n"));
507 * The neg.oem_netbios_computer.a key here must match the remote computer name
508 * given in the DOM_CLNT_SRV.uni_comp_name used on all netlogon pipe
509 * operations that use credentials.
513 status = schannel_get_creds_state(p, lp_ctx,
514 neg.oem_netbios_computer.a, &creds);
517 talloc_unlink(p, lp_ctx);
518 if (!NT_STATUS_IS_OK(status)) {
519 DEBUG(0, ("pipe_schannel_auth_bind: Attempt to bind using schannel without successful serverauth2\n"));
523 schannel_auth = talloc(p, struct schannel_state);
524 if (!schannel_auth) {
529 schannel_auth->state = SCHANNEL_STATE_START;
530 schannel_auth->seq_num = 0;
531 schannel_auth->initiator = false;
532 schannel_auth->creds = creds;
535 * JRA. Should we also copy the schannel session key into the pipe session key p->session_key
536 * here ? We do that for NTLMSSP, but the session key is already set up from the vuser
537 * struct of the person who opened the pipe. I need to test this further. JRA.
539 * VL. As we are mapping this to guest set the generic key
540 * "SystemLibraryDTC" key here. It's a bit difficult to test against
541 * W2k3, as it does not allow schannel binds against SAMR and LSA
545 ret = session_info_set_session_key(p->session_info, generic_session_key());
548 DEBUG(0, ("session_info_set_session_key failed\n"));
552 /*** SCHANNEL verifier ***/
554 reply.MessageType = NL_NEGOTIATE_RESPONSE;
556 reply.Buffer.dummy = 5; /* ??? actually I don't think
557 * this has any meaning
560 ndr_err = ndr_push_struct_blob(response, mem_ctx, &reply,
561 (ndr_push_flags_fn_t)ndr_push_NL_AUTH_MESSAGE);
562 if (!NDR_ERR_CODE_IS_SUCCESS(ndr_err)) {
563 DEBUG(0,("Failed to marshall NL_AUTH_MESSAGE.\n"));
567 if (DEBUGLEVEL >= 10) {
568 NDR_PRINT_DEBUG(NL_AUTH_MESSAGE, &reply);
571 DEBUG(10,("pipe_schannel_auth_bind: schannel auth: domain [%s] myname [%s]\n",
572 neg.oem_netbios_domain.a, neg.oem_netbios_computer.a));
574 /* We're finished with this bind - no more packets. */
575 p->auth.auth_ctx = schannel_auth;
576 p->auth.auth_type = DCERPC_AUTH_TYPE_SCHANNEL;
578 p->pipe_bound = True;
583 /*******************************************************************
584 Handle an NTLMSSP bind auth.
585 *******************************************************************/
587 static bool pipe_auth_generic_bind(struct pipes_struct *p,
589 struct dcerpc_auth *auth_info,
592 struct gensec_security *gensec_security = NULL;
595 status = auth_generic_server_authtype_start(p,
596 auth_info->auth_type,
597 auth_info->auth_level,
598 &auth_info->credentials,
602 if (!NT_STATUS_EQUAL(status, NT_STATUS_OK)) {
603 DEBUG(0, (__location__ ": auth_generic_server_authtype_start failed: %s\n",
608 /* Make sure data is bound to the memctx, to be freed the caller */
609 talloc_steal(mem_ctx, response->data);
611 p->auth.auth_ctx = gensec_security;
612 p->auth.auth_type = auth_info->auth_type;
617 /*******************************************************************
618 Process an NTLMSSP authentication response.
619 If this function succeeds, the user has been authenticated
620 and their domain, name and calling workstation stored in
622 *******************************************************************/
624 static bool pipe_auth_generic_verify_final(TALLOC_CTX *mem_ctx,
625 struct gensec_security *gensec_security,
626 enum dcerpc_AuthLevel auth_level,
627 struct auth_session_info **session_info)
632 DEBUG(5, (__location__ ": checking user details\n"));
634 /* Finally - if the pipe negotiated integrity (sign) or privacy (seal)
635 ensure the underlying NTLMSSP flags are also set. If not we should
638 status = auth_generic_server_check_flags(gensec_security,
640 DCERPC_AUTH_LEVEL_INTEGRITY),
642 DCERPC_AUTH_LEVEL_PRIVACY));
643 if (!NT_STATUS_IS_OK(status)) {
644 DEBUG(0, (__location__ ": Client failed to negotatie proper "
645 "security for rpc connection\n"));
649 TALLOC_FREE(*session_info);
651 status = auth_generic_server_get_user_info(gensec_security,
652 mem_ctx, session_info);
653 if (!NT_STATUS_IS_OK(status)) {
654 DEBUG(0, (__location__ ": failed to obtain the server info "
655 "for authenticated user: %s\n", nt_errstr(status)));
659 if ((*session_info)->security_token == NULL) {
660 DEBUG(1, ("Auth module failed to provide nt_user_token\n"));
665 * We're an authenticated bind over smb, so the session key needs to
666 * be set to "SystemLibraryDTC". Weird, but this is what Windows
667 * does. See the RPC-SAMBA3SESSIONKEY.
670 ret = session_info_set_session_key((*session_info), generic_session_key());
672 DEBUG(0, ("Failed to set session key!\n"));
679 static NTSTATUS pipe_auth_verify_final(struct pipes_struct *p)
681 enum spnego_mech auth_type;
682 struct gensec_security *gensec_security;
683 struct spnego_context *spnego_ctx;
687 switch (p->auth.auth_type) {
688 case DCERPC_AUTH_TYPE_NTLMSSP:
689 case DCERPC_AUTH_TYPE_KRB5:
690 gensec_security = talloc_get_type_abort(p->auth.auth_ctx,
691 struct gensec_security);
692 if (!pipe_auth_generic_verify_final(p, gensec_security,
695 return NT_STATUS_ACCESS_DENIED;
698 case DCERPC_AUTH_TYPE_SPNEGO:
699 spnego_ctx = talloc_get_type_abort(p->auth.auth_ctx,
700 struct spnego_context);
701 status = spnego_get_negotiated_mech(spnego_ctx,
702 &auth_type, &gensec_security);
703 if (!NT_STATUS_IS_OK(status)) {
704 DEBUG(0, ("Bad SPNEGO state (%s)\n",
708 if (!pipe_auth_generic_verify_final(p, gensec_security,
711 return NT_STATUS_ACCESS_DENIED;
715 DEBUG(0, (__location__ ": incorrect auth type (%u).\n",
716 (unsigned int)p->auth.auth_type));
717 return NT_STATUS_ACCESS_DENIED;
720 p->pipe_bound = true;
725 /*******************************************************************
726 Respond to a pipe bind request.
727 *******************************************************************/
729 static bool api_pipe_bind_req(struct pipes_struct *p,
730 struct ncacn_packet *pkt)
732 struct dcerpc_auth auth_info;
734 unsigned int auth_type = DCERPC_AUTH_TYPE_NONE;
736 struct ndr_syntax_id id;
737 union dcerpc_payload u;
738 struct dcerpc_ack_ctx bind_ack_ctx;
739 DATA_BLOB auth_resp = data_blob_null;
740 DATA_BLOB auth_blob = data_blob_null;
742 /* No rebinds on a bound pipe - use alter context. */
744 DEBUG(2,("Rejecting bind request on bound rpc connection\n"));
745 return setup_bind_nak(p, pkt);
748 if (pkt->u.bind.num_contexts == 0) {
749 DEBUG(0, ("api_pipe_bind_req: no rpc contexts around\n"));
754 * Try and find the correct pipe name to ensure
755 * that this is a pipe name we support.
757 id = pkt->u.bind.ctx_list[0].abstract_syntax;
758 if (rpc_srv_pipe_exists_by_id(&id)) {
759 DEBUG(3, ("api_pipe_bind_req: %s -> %s rpc service\n",
760 rpc_srv_get_pipe_cli_name(&id),
761 rpc_srv_get_pipe_srv_name(&id)));
763 status = smb_probe_module(
764 "rpc", get_pipe_name_from_syntax(
768 if (NT_STATUS_IS_ERR(status)) {
769 DEBUG(3,("api_pipe_bind_req: Unknown rpc service name "
770 "%s in bind request.\n",
771 get_pipe_name_from_syntax(talloc_tos(), &id)));
773 return setup_bind_nak(p, pkt);
776 if (rpc_srv_get_pipe_interface_by_cli_name(
777 get_pipe_name_from_syntax(talloc_tos(),
780 DEBUG(3, ("api_pipe_bind_req: %s -> %s rpc service\n",
781 rpc_srv_get_pipe_cli_name(&id),
782 rpc_srv_get_pipe_srv_name(&id)));
784 DEBUG(0, ("module %s doesn't provide functions for "
786 get_pipe_name_from_syntax(talloc_tos(), &id),
787 get_pipe_name_from_syntax(talloc_tos(), &id)));
788 return setup_bind_nak(p, pkt);
792 DEBUG(5,("api_pipe_bind_req: make response. %d\n", __LINE__));
794 if (pkt->u.bind.assoc_group_id != 0) {
795 assoc_gid = pkt->u.bind.assoc_group_id;
801 * Create the bind response struct.
804 /* If the requested abstract synt uuid doesn't match our client pipe,
805 reject the bind_ack & set the transfer interface synt to all 0's,
806 ver 0 (observed when NT5 attempts to bind to abstract interfaces
808 Needed when adding entries to a DACL from NT5 - SK */
810 if (check_bind_req(p,
811 &pkt->u.bind.ctx_list[0].abstract_syntax,
812 &pkt->u.bind.ctx_list[0].transfer_syntaxes[0],
813 pkt->u.bind.ctx_list[0].context_id)) {
815 bind_ack_ctx.result = 0;
816 bind_ack_ctx.reason = 0;
817 bind_ack_ctx.syntax = pkt->u.bind.ctx_list[0].transfer_syntaxes[0];
819 p->pipe_bound = False;
820 /* Rejection reason: abstract syntax not supported */
821 bind_ack_ctx.result = DCERPC_BIND_PROVIDER_REJECT;
822 bind_ack_ctx.reason = DCERPC_BIND_REASON_ASYNTAX;
823 bind_ack_ctx.syntax = null_ndr_syntax_id;
827 * Check if this is an authenticated bind request.
829 if (pkt->auth_length) {
830 /* Quick length check. Won't catch a bad auth footer,
831 * prevents overrun. */
833 if (pkt->frag_length < RPC_HEADER_LEN +
834 DCERPC_AUTH_TRAILER_LENGTH +
836 DEBUG(0,("api_pipe_bind_req: auth_len (%u) "
837 "too long for fragment %u.\n",
838 (unsigned int)pkt->auth_length,
839 (unsigned int)pkt->frag_length));
844 * Decode the authentication verifier.
846 status = dcerpc_pull_dcerpc_auth(pkt,
847 &pkt->u.bind.auth_info,
848 &auth_info, p->endian);
849 if (!NT_STATUS_IS_OK(status)) {
850 DEBUG(0, ("Unable to unmarshall dcerpc_auth.\n"));
854 auth_type = auth_info.auth_type;
856 /* Work out if we have to sign or seal etc. */
857 switch (auth_info.auth_level) {
858 case DCERPC_AUTH_LEVEL_INTEGRITY:
859 p->auth.auth_level = DCERPC_AUTH_LEVEL_INTEGRITY;
861 case DCERPC_AUTH_LEVEL_PRIVACY:
862 p->auth.auth_level = DCERPC_AUTH_LEVEL_PRIVACY;
864 case DCERPC_AUTH_LEVEL_CONNECT:
865 p->auth.auth_level = DCERPC_AUTH_LEVEL_CONNECT;
868 DEBUG(0, ("Unexpected auth level (%u).\n",
869 (unsigned int)auth_info.auth_level ));
874 case DCERPC_AUTH_TYPE_NTLMSSP:
875 if (!pipe_auth_generic_bind(p, pkt,
876 &auth_info, &auth_resp)) {
882 case DCERPC_AUTH_TYPE_SCHANNEL:
883 if (!pipe_schannel_auth_bind(p, pkt,
884 &auth_info, &auth_resp)) {
889 case DCERPC_AUTH_TYPE_SPNEGO:
890 if (!pipe_spnego_auth_bind(p, pkt,
891 &auth_info, &auth_resp)) {
896 case DCERPC_AUTH_TYPE_KRB5:
897 if (!pipe_auth_generic_bind(p, pkt,
898 &auth_info, &auth_resp)) {
903 case DCERPC_AUTH_TYPE_NCALRPC_AS_SYSTEM:
904 if (p->transport == NCALRPC && p->ncalrpc_as_system) {
905 TALLOC_FREE(p->session_info);
907 status = make_session_info_system(p,
909 if (!NT_STATUS_IS_OK(status)) {
913 auth_resp = data_blob_talloc(pkt,
917 p->auth.auth_type = DCERPC_AUTH_TYPE_NCALRPC_AS_SYSTEM;
918 p->pipe_bound = true;
924 case DCERPC_AUTH_TYPE_NONE:
928 DEBUG(0, ("Unknown auth type %x requested.\n", auth_type));
933 if (auth_type == DCERPC_AUTH_TYPE_NONE) {
934 /* Unauthenticated bind request. */
935 /* We're finished - no more packets. */
936 p->auth.auth_type = DCERPC_AUTH_TYPE_NONE;
937 /* We must set the pipe auth_level here also. */
938 p->auth.auth_level = DCERPC_AUTH_LEVEL_NONE;
939 p->pipe_bound = True;
940 /* The session key was initialized from the SMB
941 * session in make_internal_rpc_pipe_p */
944 ZERO_STRUCT(u.bind_ack);
945 u.bind_ack.max_xmit_frag = RPC_MAX_PDU_FRAG_LEN;
946 u.bind_ack.max_recv_frag = RPC_MAX_PDU_FRAG_LEN;
947 u.bind_ack.assoc_group_id = assoc_gid;
949 /* name has to be \PIPE\xxxxx */
950 u.bind_ack.secondary_address =
951 talloc_asprintf(pkt, "\\PIPE\\%s",
952 rpc_srv_get_pipe_srv_name(&id));
953 if (!u.bind_ack.secondary_address) {
954 DEBUG(0, ("Out of memory!\n"));
957 u.bind_ack.secondary_address_size =
958 strlen(u.bind_ack.secondary_address) + 1;
960 u.bind_ack.num_results = 1;
961 u.bind_ack.ctx_list = &bind_ack_ctx;
963 /* NOTE: We leave the auth_info empty so we can calculate the padding
964 * later and then append the auth_info --simo */
967 * Marshall directly into the outgoing PDU space. We
968 * must do this as we need to set to the bind response
969 * header and are never sending more than one PDU here.
972 status = dcerpc_push_ncacn_packet(p->mem_ctx,
974 DCERPC_PFC_FLAG_FIRST |
975 DCERPC_PFC_FLAG_LAST,
980 if (!NT_STATUS_IS_OK(status)) {
981 DEBUG(0, ("Failed to marshall bind_ack packet. (%s)\n",
985 if (auth_resp.length) {
987 status = dcerpc_push_dcerpc_auth(pkt,
989 auth_info.auth_level,
991 1, /* auth_context_id */
994 if (!NT_STATUS_IS_OK(status)) {
995 DEBUG(0, ("Marshalling of dcerpc_auth failed.\n"));
1000 /* Now that we have the auth len store it into the right place in
1001 * the dcerpc header */
1002 dcerpc_set_frag_length(&p->out_data.frag,
1003 p->out_data.frag.length + auth_blob.length);
1005 if (auth_blob.length) {
1007 if (!data_blob_append(p->mem_ctx, &p->out_data.frag,
1008 auth_blob.data, auth_blob.length)) {
1009 DEBUG(0, ("Append of auth info failed.\n"));
1015 * Setup the lengths for the initial reply.
1018 p->out_data.data_sent_length = 0;
1019 p->out_data.current_pdu_sent = 0;
1021 TALLOC_FREE(auth_blob.data);
1026 data_blob_free(&p->out_data.frag);
1027 TALLOC_FREE(auth_blob.data);
1028 return setup_bind_nak(p, pkt);
1031 /*******************************************************************
1032 This is the "stage3" response after a bind request and reply.
1033 *******************************************************************/
1035 bool api_pipe_bind_auth3(struct pipes_struct *p, struct ncacn_packet *pkt)
1037 struct dcerpc_auth auth_info;
1038 DATA_BLOB response = data_blob_null;
1039 struct gensec_security *gensec_security;
1040 struct spnego_context *spnego_ctx;
1043 DEBUG(5, ("api_pipe_bind_auth3: decode request. %d\n", __LINE__));
1045 if (pkt->auth_length == 0) {
1046 DEBUG(0, ("No auth field sent for bind request!\n"));
1050 /* Ensure there's enough data for an authenticated request. */
1051 if (pkt->frag_length < RPC_HEADER_LEN
1052 + DCERPC_AUTH_TRAILER_LENGTH
1053 + pkt->auth_length) {
1054 DEBUG(0,("api_pipe_ntlmssp_auth_process: auth_len "
1055 "%u is too large.\n",
1056 (unsigned int)pkt->auth_length));
1061 * Decode the authentication verifier response.
1064 status = dcerpc_pull_dcerpc_auth(pkt,
1065 &pkt->u.auth3.auth_info,
1066 &auth_info, p->endian);
1067 if (!NT_STATUS_IS_OK(status)) {
1068 DEBUG(0, ("Failed to unmarshall dcerpc_auth.\n"));
1072 /* We must NEVER look at auth_info->auth_pad_len here,
1073 * as old Samba client code gets it wrong and sends it
1077 if (auth_info.auth_type != p->auth.auth_type) {
1078 DEBUG(0, ("Auth type mismatch! Client sent %d, "
1079 "but auth was started as type %d!\n",
1080 auth_info.auth_type, p->auth.auth_type));
1084 switch (auth_info.auth_type) {
1085 case DCERPC_AUTH_TYPE_NTLMSSP:
1086 case DCERPC_AUTH_TYPE_KRB5:
1087 gensec_security = talloc_get_type_abort(p->auth.auth_ctx,
1088 struct gensec_security);
1089 status = auth_generic_server_step(gensec_security,
1090 pkt, &auth_info.credentials,
1093 case DCERPC_AUTH_TYPE_SPNEGO:
1094 spnego_ctx = talloc_get_type_abort(p->auth.auth_ctx,
1095 struct spnego_context);
1096 status = spnego_server_step(spnego_ctx,
1097 pkt, &auth_info.credentials,
1101 DEBUG(0, (__location__ ": incorrect auth type (%u).\n",
1102 (unsigned int)auth_info.auth_type));
1106 if (NT_STATUS_EQUAL(status,
1107 NT_STATUS_MORE_PROCESSING_REQUIRED) ||
1109 DEBUG(0, (__location__ ": This was supposed to be the final "
1110 "leg, but crypto machinery claims a response is "
1111 "needed, aborting auth!\n"));
1112 data_blob_free(&response);
1115 if (!NT_STATUS_IS_OK(status)) {
1116 DEBUG(0, ("Auth failed (%s)\n", nt_errstr(status)));
1120 /* Now verify auth was indeed successful and extract server info */
1121 status = pipe_auth_verify_final(p);
1122 if (!NT_STATUS_IS_OK(status)) {
1123 DEBUG(0, ("Auth Verify failed (%s)\n", nt_errstr(status)));
1131 TALLOC_FREE(p->auth.auth_ctx);
1135 /****************************************************************************
1136 Deal with an alter context call. Can be third part of 3 leg auth request for
1138 ****************************************************************************/
1140 static bool api_pipe_alter_context(struct pipes_struct *p,
1141 struct ncacn_packet *pkt)
1143 struct dcerpc_auth auth_info;
1146 union dcerpc_payload u;
1147 struct dcerpc_ack_ctx bind_ack_ctx;
1148 DATA_BLOB auth_resp = data_blob_null;
1149 DATA_BLOB auth_blob = data_blob_null;
1151 struct gensec_security *gensec_security;
1152 struct spnego_context *spnego_ctx;
1154 DEBUG(5,("api_pipe_alter_context: make response. %d\n", __LINE__));
1156 if (pkt->u.bind.assoc_group_id != 0) {
1157 assoc_gid = pkt->u.bind.assoc_group_id;
1163 * Create the bind response struct.
1166 /* If the requested abstract synt uuid doesn't match our client pipe,
1167 reject the bind_ack & set the transfer interface synt to all 0's,
1168 ver 0 (observed when NT5 attempts to bind to abstract interfaces
1170 Needed when adding entries to a DACL from NT5 - SK */
1172 if (check_bind_req(p,
1173 &pkt->u.bind.ctx_list[0].abstract_syntax,
1174 &pkt->u.bind.ctx_list[0].transfer_syntaxes[0],
1175 pkt->u.bind.ctx_list[0].context_id)) {
1177 bind_ack_ctx.result = 0;
1178 bind_ack_ctx.reason = 0;
1179 bind_ack_ctx.syntax = pkt->u.bind.ctx_list[0].transfer_syntaxes[0];
1181 p->pipe_bound = False;
1182 /* Rejection reason: abstract syntax not supported */
1183 bind_ack_ctx.result = DCERPC_BIND_PROVIDER_REJECT;
1184 bind_ack_ctx.reason = DCERPC_BIND_REASON_ASYNTAX;
1185 bind_ack_ctx.syntax = null_ndr_syntax_id;
1189 * Check if this is an authenticated alter context request.
1191 if (pkt->auth_length) {
1192 /* Quick length check. Won't catch a bad auth footer,
1193 * prevents overrun. */
1195 if (pkt->frag_length < RPC_HEADER_LEN +
1196 DCERPC_AUTH_TRAILER_LENGTH +
1198 DEBUG(0,("api_pipe_alter_context: auth_len (%u) "
1199 "too long for fragment %u.\n",
1200 (unsigned int)pkt->auth_length,
1201 (unsigned int)pkt->frag_length ));
1205 status = dcerpc_pull_dcerpc_auth(pkt,
1206 &pkt->u.bind.auth_info,
1207 &auth_info, p->endian);
1208 if (!NT_STATUS_IS_OK(status)) {
1209 DEBUG(0, ("Unable to unmarshall dcerpc_auth.\n"));
1213 /* We can only finish if the pipe is unbound for now */
1214 if (p->pipe_bound) {
1215 DEBUG(0, (__location__ ": Pipe already bound, "
1216 "Altering Context not yet supported!\n"));
1220 if (auth_info.auth_type != p->auth.auth_type) {
1221 DEBUG(0, ("Auth type mismatch! Client sent %d, "
1222 "but auth was started as type %d!\n",
1223 auth_info.auth_type, p->auth.auth_type));
1228 switch (auth_info.auth_type) {
1229 case DCERPC_AUTH_TYPE_SPNEGO:
1230 spnego_ctx = talloc_get_type_abort(p->auth.auth_ctx,
1231 struct spnego_context);
1232 status = spnego_server_step(spnego_ctx,
1234 &auth_info.credentials,
1238 case DCERPC_AUTH_TYPE_KRB5:
1239 case DCERPC_AUTH_TYPE_NTLMSSP:
1240 gensec_security = talloc_get_type_abort(p->auth.auth_ctx,
1241 struct gensec_security);
1242 status = auth_generic_server_step(gensec_security,
1244 &auth_info.credentials,
1249 DEBUG(3, (__location__ ": Usupported auth type (%d) "
1250 "in alter-context call\n",
1251 auth_info.auth_type));
1255 if (NT_STATUS_IS_OK(status)) {
1256 /* third leg of auth, verify auth info */
1257 status = pipe_auth_verify_final(p);
1258 if (!NT_STATUS_IS_OK(status)) {
1259 DEBUG(0, ("Auth Verify failed (%s)\n",
1260 nt_errstr(status)));
1263 } else if (NT_STATUS_EQUAL(status,
1264 NT_STATUS_MORE_PROCESSING_REQUIRED)) {
1265 DEBUG(10, ("More auth legs required.\n"));
1267 DEBUG(0, ("Auth step returned an error (%s)\n",
1268 nt_errstr(status)));
1273 ZERO_STRUCT(u.alter_resp);
1274 u.alter_resp.max_xmit_frag = RPC_MAX_PDU_FRAG_LEN;
1275 u.alter_resp.max_recv_frag = RPC_MAX_PDU_FRAG_LEN;
1276 u.alter_resp.assoc_group_id = assoc_gid;
1278 /* secondary address CAN be NULL
1279 * as the specs say it's ignored.
1280 * It MUST be NULL to have the spoolss working.
1282 u.alter_resp.secondary_address = "";
1283 u.alter_resp.secondary_address_size = 1;
1285 u.alter_resp.num_results = 1;
1286 u.alter_resp.ctx_list = &bind_ack_ctx;
1288 /* NOTE: We leave the auth_info empty so we can calculate the padding
1289 * later and then append the auth_info --simo */
1292 * Marshall directly into the outgoing PDU space. We
1293 * must do this as we need to set to the bind response
1294 * header and are never sending more than one PDU here.
1297 status = dcerpc_push_ncacn_packet(p->mem_ctx,
1298 DCERPC_PKT_ALTER_RESP,
1299 DCERPC_PFC_FLAG_FIRST |
1300 DCERPC_PFC_FLAG_LAST,
1305 if (!NT_STATUS_IS_OK(status)) {
1306 DEBUG(0, ("Failed to marshall bind_ack packet. (%s)\n",
1307 nt_errstr(status)));
1310 if (auth_resp.length) {
1312 /* Work out any padding needed before the auth footer. */
1313 pad_len = p->out_data.frag.length % SERVER_NDR_PADDING_SIZE;
1315 pad_len = SERVER_NDR_PADDING_SIZE - pad_len;
1316 DEBUG(10, ("auth pad_len = %u\n",
1317 (unsigned int)pad_len));
1320 status = dcerpc_push_dcerpc_auth(pkt,
1321 auth_info.auth_type,
1322 auth_info.auth_level,
1324 1, /* auth_context_id */
1327 if (!NT_STATUS_IS_OK(status)) {
1328 DEBUG(0, ("Marshalling of dcerpc_auth failed.\n"));
1333 /* Now that we have the auth len store it into the right place in
1334 * the dcerpc header */
1335 dcerpc_set_frag_length(&p->out_data.frag,
1336 p->out_data.frag.length +
1337 pad_len + auth_blob.length);
1339 if (auth_resp.length) {
1341 char pad[SERVER_NDR_PADDING_SIZE];
1342 memset(pad, '\0', SERVER_NDR_PADDING_SIZE);
1343 if (!data_blob_append(p->mem_ctx,
1346 DEBUG(0, ("api_pipe_bind_req: failed to add "
1347 "%u bytes of pad data.\n",
1348 (unsigned int)pad_len));
1353 if (!data_blob_append(p->mem_ctx, &p->out_data.frag,
1354 auth_blob.data, auth_blob.length)) {
1355 DEBUG(0, ("Append of auth info failed.\n"));
1361 * Setup the lengths for the initial reply.
1364 p->out_data.data_sent_length = 0;
1365 p->out_data.current_pdu_sent = 0;
1367 TALLOC_FREE(auth_blob.data);
1372 data_blob_free(&p->out_data.frag);
1373 TALLOC_FREE(auth_blob.data);
1374 return setup_bind_nak(p, pkt);
1377 static bool api_rpcTNP(struct pipes_struct *p, struct ncacn_packet *pkt,
1378 const struct api_struct *api_rpc_cmds, int n_cmds,
1379 const struct ndr_syntax_id *syntax);
1381 /****************************************************************************
1382 Find the correct RPC function to call for this request.
1383 If the pipe is authenticated then become the correct UNIX user
1384 before doing the call.
1385 ****************************************************************************/
1387 static bool api_pipe_request(struct pipes_struct *p,
1388 struct ncacn_packet *pkt)
1391 struct pipe_rpc_fns *pipe_fns;
1393 if (!p->pipe_bound) {
1394 DEBUG(1, ("Pipe not bound!\n"));
1395 data_blob_free(&p->out_data.rdata);
1399 if (!become_authenticated_pipe_user(p->session_info)) {
1400 DEBUG(1, ("Failed to become pipe user!\n"));
1401 data_blob_free(&p->out_data.rdata);
1405 /* get the set of RPC functions for this context */
1407 pipe_fns = find_pipe_fns_by_context(p->contexts,
1408 pkt->u.request.context_id);
1411 TALLOC_CTX *frame = talloc_stackframe();
1413 DEBUG(5, ("Requested %s rpc service\n",
1414 get_pipe_name_from_syntax(talloc_tos(), &pipe_fns->syntax)));
1416 ret = api_rpcTNP(p, pkt, pipe_fns->cmds, pipe_fns->n_cmds,
1422 DEBUG(0, ("No rpc function table associated with context "
1424 pkt->u.request.context_id));
1427 unbecome_authenticated_pipe_user();
1432 /*******************************************************************
1433 Calls the underlying RPC function for a named pipe.
1434 ********************************************************************/
1436 static bool api_rpcTNP(struct pipes_struct *p, struct ncacn_packet *pkt,
1437 const struct api_struct *api_rpc_cmds, int n_cmds,
1438 const struct ndr_syntax_id *syntax)
1443 /* interpret the command */
1444 DEBUG(4,("api_rpcTNP: %s op 0x%x - ",
1445 get_pipe_name_from_syntax(talloc_tos(), syntax),
1446 pkt->u.request.opnum));
1448 if (DEBUGLEVEL >= 50) {
1450 slprintf(name, sizeof(name)-1, "in_%s",
1451 get_pipe_name_from_syntax(talloc_tos(), syntax));
1452 dump_pdu_region(name, pkt->u.request.opnum,
1453 &p->in_data.data, 0,
1454 p->in_data.data.length);
1457 for (fn_num = 0; fn_num < n_cmds; fn_num++) {
1458 if (api_rpc_cmds[fn_num].opnum == pkt->u.request.opnum &&
1459 api_rpc_cmds[fn_num].fn != NULL) {
1460 DEBUG(3, ("api_rpcTNP: rpc command: %s\n",
1461 api_rpc_cmds[fn_num].name));
1466 if (fn_num == n_cmds) {
1468 * For an unknown RPC just return a fault PDU but
1469 * return True to allow RPC's on the pipe to continue
1470 * and not put the pipe into fault state. JRA.
1472 DEBUG(4, ("unknown\n"));
1473 setup_fault_pdu(p, NT_STATUS(DCERPC_FAULT_OP_RNG_ERROR));
1477 offset1 = p->out_data.rdata.length;
1479 DEBUG(6, ("api_rpc_cmds[%d].fn == %p\n",
1480 fn_num, api_rpc_cmds[fn_num].fn));
1481 /* do the actual command */
1482 if(!api_rpc_cmds[fn_num].fn(p)) {
1483 DEBUG(0,("api_rpcTNP: %s: %s failed.\n",
1484 get_pipe_name_from_syntax(talloc_tos(), syntax),
1485 api_rpc_cmds[fn_num].name));
1486 data_blob_free(&p->out_data.rdata);
1490 if (p->bad_handle_fault_state) {
1491 DEBUG(4,("api_rpcTNP: bad handle fault return.\n"));
1492 p->bad_handle_fault_state = False;
1493 setup_fault_pdu(p, NT_STATUS(DCERPC_FAULT_CONTEXT_MISMATCH));
1497 if (p->rng_fault_state) {
1498 DEBUG(4, ("api_rpcTNP: rng fault return\n"));
1499 p->rng_fault_state = False;
1500 setup_fault_pdu(p, NT_STATUS(DCERPC_FAULT_OP_RNG_ERROR));
1504 if (DEBUGLEVEL >= 50) {
1506 slprintf(name, sizeof(name)-1, "out_%s",
1507 get_pipe_name_from_syntax(talloc_tos(), syntax));
1508 dump_pdu_region(name, pkt->u.request.opnum,
1509 &p->out_data.rdata, offset1,
1510 p->out_data.rdata.length);
1513 DEBUG(5,("api_rpcTNP: called %s successfully\n",
1514 get_pipe_name_from_syntax(talloc_tos(), syntax)));
1516 /* Check for buffer underflow in rpc parsing */
1517 if ((DEBUGLEVEL >= 10) &&
1518 (pkt->frag_length < p->in_data.data.length)) {
1519 DEBUG(10, ("api_rpcTNP: rpc input buffer underflow (parse error?)\n"));
1520 dump_data(10, p->in_data.data.data + pkt->frag_length,
1521 p->in_data.data.length - pkt->frag_length);
1527 /****************************************************************************
1528 Initialise an outgoing packet.
1529 ****************************************************************************/
1531 static bool pipe_init_outgoing_data(struct pipes_struct *p)
1533 output_data *o_data = &p->out_data;
1535 /* Reset the offset counters. */
1536 o_data->data_sent_length = 0;
1537 o_data->current_pdu_sent = 0;
1539 data_blob_free(&o_data->frag);
1541 /* Free any memory in the current return data buffer. */
1542 data_blob_free(&o_data->rdata);
1547 /****************************************************************************
1548 Sets the fault state on incoming packets.
1549 ****************************************************************************/
1551 void set_incoming_fault(struct pipes_struct *p)
1553 data_blob_free(&p->in_data.data);
1554 p->in_data.pdu_needed_len = 0;
1555 p->in_data.pdu.length = 0;
1556 p->fault_state = True;
1558 DEBUG(10, ("Setting fault state\n"));
1561 static NTSTATUS dcesrv_auth_request(struct pipe_auth_data *auth,
1562 struct ncacn_packet *pkt,
1566 size_t hdr_size = DCERPC_REQUEST_LENGTH;
1569 DEBUG(10, ("Checking request auth.\n"));
1571 if (pkt->pfc_flags & DCERPC_PFC_FLAG_OBJECT_UUID) {
1575 /* in case of sealing this function will unseal the data in place */
1576 status = dcerpc_check_auth(auth, pkt,
1577 &pkt->u.request.stub_and_verifier,
1580 if (!NT_STATUS_IS_OK(status)) {
1585 /* remove padding and auth trailer,
1586 * this way the caller will get just the data */
1587 if (pkt->auth_length) {
1588 size_t trail_len = pad_len
1589 + DCERPC_AUTH_TRAILER_LENGTH
1591 if (pkt->u.request.stub_and_verifier.length < trail_len) {
1592 return NT_STATUS_INFO_LENGTH_MISMATCH;
1594 pkt->u.request.stub_and_verifier.length -= trail_len;
1597 return NT_STATUS_OK;
1600 /****************************************************************************
1601 Processes a request pdu. This will do auth processing if needed, and
1602 appends the data into the complete stream if the LAST flag is not set.
1603 ****************************************************************************/
1605 static bool process_request_pdu(struct pipes_struct *p, struct ncacn_packet *pkt)
1610 if (!p->pipe_bound) {
1611 DEBUG(0,("process_request_pdu: rpc request with no bind.\n"));
1612 set_incoming_fault(p);
1616 /* Store the opnum */
1617 p->opnum = pkt->u.request.opnum;
1619 status = dcesrv_auth_request(&p->auth, pkt, &p->in_data.pdu);
1620 if (!NT_STATUS_IS_OK(status)) {
1621 DEBUG(0, ("Failed to check packet auth. (%s)\n",
1622 nt_errstr(status)));
1623 set_incoming_fault(p);
1627 data = pkt->u.request.stub_and_verifier;
1630 * Check the data length doesn't go over the 15Mb limit.
1631 * increased after observing a bug in the Windows NT 4.0 SP6a
1632 * spoolsv.exe when the response to a GETPRINTERDRIVER2 RPC
1633 * will not fit in the initial buffer of size 0x1068 --jerry 22/01/2002
1636 if (p->in_data.data.length + data.length > MAX_RPC_DATA_SIZE) {
1637 DEBUG(0, ("process_request_pdu: "
1638 "rpc data buffer too large (%u) + (%u)\n",
1639 (unsigned int)p->in_data.data.length,
1640 (unsigned int)data.length));
1641 set_incoming_fault(p);
1646 * Append the data portion into the buffer and return.
1650 if (!data_blob_append(p->mem_ctx, &p->in_data.data,
1651 data.data, data.length)) {
1652 DEBUG(0, ("Unable to append data size %u "
1653 "to parse buffer of size %u.\n",
1654 (unsigned int)data.length,
1655 (unsigned int)p->in_data.data.length));
1656 set_incoming_fault(p);
1661 if (pkt->pfc_flags & DCERPC_PFC_FLAG_LAST) {
1664 * Ok - we finally have a complete RPC stream.
1665 * Call the rpc command to process it.
1669 * Process the complete data stream here.
1671 if (pipe_init_outgoing_data(p)) {
1672 ret = api_pipe_request(p, pkt);
1681 /****************************************************************************
1682 Processes a finished PDU stored in p->in_data.pdu.
1683 ****************************************************************************/
1685 void process_complete_pdu(struct pipes_struct *p)
1687 struct ncacn_packet *pkt = NULL;
1691 if(p->fault_state) {
1692 DEBUG(10,("RPC connection in fault state.\n"));
1696 pkt = talloc(p->mem_ctx, struct ncacn_packet);
1698 DEBUG(0, ("Out of memory!\n"));
1703 * Ensure we're using the corrent endianness for both the
1704 * RPC header flags and the raw data we will be reading from.
1706 if (dcerpc_get_endian_flag(&p->in_data.pdu) & DCERPC_DREP_LE) {
1707 p->endian = RPC_LITTLE_ENDIAN;
1709 p->endian = RPC_BIG_ENDIAN;
1711 DEBUG(10, ("PDU is in %s Endian format!\n", p->endian?"Big":"Little"));
1713 status = dcerpc_pull_ncacn_packet(pkt, &p->in_data.pdu,
1715 if (!NT_STATUS_IS_OK(status)) {
1716 DEBUG(0, ("Failed to unmarshal rpc packet: %s!\n",
1717 nt_errstr(status)));
1721 /* Store the call_id */
1722 p->call_id = pkt->call_id;
1724 DEBUG(10, ("Processing packet type %u\n", (unsigned int)pkt->ptype));
1726 switch (pkt->ptype) {
1727 case DCERPC_PKT_REQUEST:
1728 reply = process_request_pdu(p, pkt);
1731 case DCERPC_PKT_PING: /* CL request - ignore... */
1732 DEBUG(0, ("Error - Connectionless packet type %u received\n",
1733 (unsigned int)pkt->ptype));
1736 case DCERPC_PKT_RESPONSE: /* No responses here. */
1737 DEBUG(0, ("Error - DCERPC_PKT_RESPONSE received from client"));
1740 case DCERPC_PKT_FAULT:
1741 case DCERPC_PKT_WORKING:
1742 /* CL request - reply to a ping when a call in process. */
1743 case DCERPC_PKT_NOCALL:
1744 /* CL - server reply to a ping call. */
1745 case DCERPC_PKT_REJECT:
1746 case DCERPC_PKT_ACK:
1747 case DCERPC_PKT_CL_CANCEL:
1748 case DCERPC_PKT_FACK:
1749 case DCERPC_PKT_CANCEL_ACK:
1750 DEBUG(0, ("Error - Connectionless packet type %u received\n",
1751 (unsigned int)pkt->ptype));
1754 case DCERPC_PKT_BIND:
1756 * We assume that a pipe bind is only in one pdu.
1758 if (pipe_init_outgoing_data(p)) {
1759 reply = api_pipe_bind_req(p, pkt);
1763 case DCERPC_PKT_BIND_ACK:
1764 case DCERPC_PKT_BIND_NAK:
1765 DEBUG(0, ("Error - DCERPC_PKT_BINDACK/DCERPC_PKT_BINDNACK "
1766 "packet type %u received.\n",
1767 (unsigned int)pkt->ptype));
1771 case DCERPC_PKT_ALTER:
1773 * We assume that a pipe bind is only in one pdu.
1775 if (pipe_init_outgoing_data(p)) {
1776 reply = api_pipe_alter_context(p, pkt);
1780 case DCERPC_PKT_ALTER_RESP:
1781 DEBUG(0, ("Error - DCERPC_PKT_ALTER_RESP received: "
1782 "Should only be server -> client.\n"));
1785 case DCERPC_PKT_AUTH3:
1787 * The third packet in an auth exchange.
1789 if (pipe_init_outgoing_data(p)) {
1790 reply = api_pipe_bind_auth3(p, pkt);
1794 case DCERPC_PKT_SHUTDOWN:
1795 DEBUG(0, ("Error - DCERPC_PKT_SHUTDOWN received: "
1796 "Should only be server -> client.\n"));
1799 case DCERPC_PKT_CO_CANCEL:
1800 /* For now just free all client data and continue
1802 DEBUG(3,("process_complete_pdu: DCERPC_PKT_CO_CANCEL."
1803 " Abandoning rpc call.\n"));
1804 /* As we never do asynchronous RPC serving, we can
1805 * never cancel a call (as far as I know).
1806 * If we ever did we'd have to send a cancel_ack reply.
1807 * For now, just free all client data and continue
1813 /* Enable this if we're doing async rpc. */
1814 /* We must check the outstanding callid matches. */
1815 if (pipe_init_outgoing_data(p)) {
1816 /* Send a cancel_ack PDU reply. */
1817 /* We should probably check the auth-verifier here. */
1818 reply = setup_cancel_ack_reply(p, pkt);
1823 case DCERPC_PKT_ORPHANED:
1824 /* We should probably check the auth-verifier here.
1825 * For now just free all client data and continue
1827 DEBUG(3, ("process_complete_pdu: DCERPC_PKT_ORPHANED."
1828 " Abandoning rpc call.\n"));
1833 DEBUG(0, ("process_complete_pdu: "
1834 "Unknown rpc type = %u received.\n",
1835 (unsigned int)pkt->ptype));
1841 DEBUG(3,("DCE/RPC fault sent!"));
1842 set_incoming_fault(p);
1843 setup_fault_pdu(p, NT_STATUS(DCERPC_FAULT_OP_RNG_ERROR));
1847 * Reset the lengths. We're ready for a new pdu.
1849 TALLOC_FREE(p->in_data.pdu.data);
1850 p->in_data.pdu_needed_len = 0;
1851 p->in_data.pdu.length = 0;