# export CXXFLAGS="$CXXFLAGS -arch i386"
# export LDFLAGS="$LDFLAGS -arch i386"
#
-#
+
+# if you have many CPU cores, you can increase this number for more
+# parallel compilation.
+MAKE_BUILD_OPTS="-j 3"
+
+#
# Versions to download and install.
#
# The following libraries and tools are required.
#
GEOIP_VERSION=1.4.8
+# GNU auto tools
+AUTOCONF_VERSION=2.69
+AUTOMAKE_VERSION=1.13.3
+LIBTOOL_VERSION=2.4.2
+
#
# You need Xcode installed to get the compilers.
#
# Start with xz: It is the sole download format of glib later than 2.31.2
#
-echo "Downloading, building, and installing xz:"
-curl -O http://tukaani.org/xz/xz-$XZ_VERSION.tar.bz2 || exit 1
-tar xf xz-$XZ_VERSION.tar.bz2 || exit 1
-cd xz-$XZ_VERSION
-CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0" ./configure || exit 1
-make -j 3 || exit 1
-$DO_MAKE_INSTALL || exit 1
-cd ..
+if [ "$XZ_VERSION" -a ! -f xz-$XZ_VERSION-done ] ; then
+ echo "Downloading, building, and installing xz:"
+ [ -f xz-$XZ_VERSION.tar.bz2 ] || curl -O http://tukaani.org/xz/xz-$XZ_VERSION.tar.bz2 || exit 1
+ bzcat xz-$XZ_VERSION.tar.bz2 | tar xf - || exit 1
+ cd xz-$XZ_VERSION
+ CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0" ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch xz-$XZ_VERSION-done
+fi
-if [ -n "$CMAKE" ]; then
+if [ "$AUTOCONF_VERSION" -a ! -f autoconf-$AUTOCONF_VERSION-done ] ; then
+ echo "Downloading, building and installing GNU autoconf..."
+ [ -f autoconf-$AUTOCONF_VERSION.tar.xz ] || curl -O ftp://ftp.gnu.org/gnu/autoconf/autoconf-$AUTOCONF_VERSION.tar.xz || exit 1
+ xzcat autoconf-$AUTOCONF_VERSION.tar.xz | tar xf - || exit 1
+ cd autoconf-$AUTOCONF_VERSION
+ ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch autoconf-$AUTOCONF_VERSION-done
+fi
+
+if [ "$AUTOMAKE_VERSION" -a ! -f automake-$AUTOMAKE_VERSION-done ] ; then
+ echo "Downloading, building and installing GNU automake..."
+ [ -f automake-$AUTOMAKE_VERSION.tar.xz ] || curl -O ftp://ftp.gnu.org/gnu/automake/automake-$AUTOMAKE_VERSION.tar.xz || exit 1
+ xzcat automake-$AUTOMAKE_VERSION.tar.xz | tar xf - || exit 1
+ cd automake-$AUTOMAKE_VERSION
+ ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch automake-$AUTOMAKE_VERSION-done
+fi
+
+if [ "$LIBTOOL_VERSION" -a ! -f libtool-$LIBTOOL_VERSION-done ] ; then
+ echo "Downloading, building and installing GNU libtool..."
+ [ -f libtool-$LIBTOOL_VERSION.tar.xz ] || curl -O ftp://ftp.gnu.org/gnu/libtool/libtool-$LIBTOOL_VERSION.tar.xz || exit 1
+ xzcat libtool-$LIBTOOL_VERSION.tar.xz | tar xf - || exit 1
+ cd libtool-$LIBTOOL_VERSION
+ ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ mv /usr/local/bin/libtool /usr/local/bin/glibtool
+ mv /usr/local/bin/libtoolize /usr/local/bin/glibtoolize
+ cd ..
+ touch libtool-$LIBTOOL_VERSION-done
+fi
+
+if [ -n "$CMAKE" -a ! -f cmake-$CMAKE_VERSION-done ]; then
echo "Downloading, building, and installing CMAKE:"
cmake_dir=`expr $CMAKE_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
- curl -O http://www.cmake.org/files/v$cmake_dir/cmake-$CMAKE_VERSION.tar.gz || exit 1
+ [ -f cmake-$CMAKE_VERSION.tar.gz ] || curl -O http://www.cmake.org/files/v$cmake_dir/cmake-$CMAKE_VERSION.tar.gz || exit 1
gzcat cmake-$CMAKE_VERSION.tar.gz | tar xf - || exit 1
cd cmake-$CMAKE_VERSION
./bootstrap || exit 1
- make -j 3 || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
+ touch cmake-$CMAKE_VERSION-done
fi
#
# with the result being a huge train wreck. Define _FORTIFY_SOURCE
# as 0 in an attempt to keep the trains on separate tracks.
#
-echo "Downloading, building, and installing GNU gettext:"
-curl -O http://ftp.gnu.org/pub/gnu/gettext/gettext-$GETTEXT_VERSION.tar.gz || exit 1
-tar xf gettext-$GETTEXT_VERSION.tar.gz || exit 1
-cd gettext-$GETTEXT_VERSION
-CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0" ./configure || exit 1
-make -j 3 || exit 1
-$DO_MAKE_INSTALL || exit 1
-cd ..
-
-echo "Downloading, building, and installing GLib:"
-glib_dir=`expr $GLIB_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
-curl -L -O http://ftp.gnome.org/pub/gnome/sources/glib/$glib_dir/glib-$GLIB_VERSION.tar.xz || exit 1
-xzcat glib-$GLIB_VERSION.tar.xz | tar xf - || exit 1
-cd glib-$GLIB_VERSION
-#
-# OS X ships with libffi, but doesn't provide its pkg-config file;
-# explicitly specify LIBFFI_CFLAGS and LIBFFI_LIBS, so the configure
-# script doesn't try to use pkg-config to get the appropriate
-# CFLAGS and LIBS.
-#
-# And, what's worse, at least with the version of Xcode that comes
-# with Leopard, /usr/include/ffi/fficonfig.h doesn't define MACOSX,
-# which causes the build of GLib to fail. If we don't find
-# "#define.*MACOSX" in /usr/include/ffi/fficonfig.h, explictly
-# define it.
-#
-if grep -qs '#define.*MACOSX' /usr/include/ffi/fficonfig.h
-then
+if [ ! -f gettext-$GETTEXT_VERSION-done ] ; then
+ echo "Downloading, building, and installing GNU gettext:"
+ [ -f gettext-$GETTEXT_VERSION.tar.gz ] || curl -O http://ftp.gnu.org/pub/gnu/gettext/gettext-$GETTEXT_VERSION.tar.gz || exit 1
+ gzcat gettext-$GETTEXT_VERSION.tar.gz | tar xf - || exit 1
+ cd gettext-$GETTEXT_VERSION
+ CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0" ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch gettext-$GETTEXT_VERSION-done
+fi
+
+if [ ! -f glib-$GLIB_VERSION-done ] ; then
+ echo "Downloading, building, and installing GLib:"
+ glib_dir=`expr $GLIB_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
+ [ -f glib-$GLIB_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/glib/$glib_dir/glib-$GLIB_VERSION.tar.xz || exit 1
+ xzcat glib-$GLIB_VERSION.tar.xz | tar xf - || exit 1
+ cd glib-$GLIB_VERSION
+ #
+ # OS X ships with libffi, but doesn't provide its pkg-config file;
+ # explicitly specify LIBFFI_CFLAGS and LIBFFI_LIBS, so the configure
+ # script doesn't try to use pkg-config to get the appropriate
+ # CFLAGS and LIBS.
+ #
+ # And, what's worse, at least with the version of Xcode that comes
+ # with Leopard, /usr/include/ffi/fficonfig.h doesn't define MACOSX,
+ # which causes the build of GLib to fail. If we don't find
+ # "#define.*MACOSX" in /usr/include/ffi/fficonfig.h, explictly
+ # define it.
+ #
+ if grep -qs '#define.*MACOSX' /usr/include/ffi/fficonfig.h
+ then
# It's defined, nothing to do
LIBFFI_CFLAGS="$CFLAGS -I/usr/include/ffi" LIBFFI_LIBS="$LDFLAGS -lffi" ./configure || exit 1
-else
+ else
CFLAGS="$CFLAGS -DMACOSX" LIBFFI_CFLAGS="$CFLAGS -I/usr/include/ffi" LIBFFI_LIBS="LDFLAGS-lffi" ./configure || exit 1
+ fi
+ make $MAKE_BUILD_OPTS || exit 1
+ # Apply patch: we depend on libffi, but pkg-config doesn't get told.
+ patch -p0 <../../macosx-support-lib-patches/glib-pkgconfig.patch || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch glib-$GLIB_VERSION-done
+fi
+
+if [ ! -f pkg-config-$PKG_CONFIG_VERSION-done ] ; then
+ echo "Downloading, building, and installing pkg-config:"
+ [ -f pkg-config-$PKG_CONFIG_VERSION.tar.gz ] || curl -O http://pkgconfig.freedesktop.org/releases/pkg-config-$PKG_CONFIG_VERSION.tar.gz || exit 1
+ gzcat pkg-config-$PKG_CONFIG_VERSION.tar.gz | tar xf - || exit 1
+ cd pkg-config-$PKG_CONFIG_VERSION
+ # Avoid another pkgconfig call
+ GLIB_CFLAGS="$CFLAGS -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include" GLIB_LIBS="$LDFLAGS -L/usr/local/lib -lglib-2.0 -lintl" ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch pkg-config-$PKG_CONFIG_VERSION-done
fi
-make -j 3 || exit 1
-# Apply patch: we depend on libffi, but pkg-config doesn't get told.
-patch -p0 <../../macosx-support-lib-patches/glib-pkgconfig.patch || exit 1
-$DO_MAKE_INSTALL || exit 1
-cd ..
-
-echo "Downloading, building, and installing pkg-config:"
-curl -O http://pkgconfig.freedesktop.org/releases/pkg-config-$PKG_CONFIG_VERSION.tar.gz || exit 1
-tar xf pkg-config-$PKG_CONFIG_VERSION.tar.gz || exit 1
-cd pkg-config-$PKG_CONFIG_VERSION
-# Avoid another pkgconfig call
-GLIB_CFLAGS="$CFLAGS -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include" GLIB_LIBS="$LDFLAGS -L/usr/local/lib -lglib-2.0 -lintl" ./configure || exit 1
-# ./configure || exit 1
-make -j 3 || exit 1
-$DO_MAKE_INSTALL || exit 1
-cd ..
#
# Now we have reached a point where we can build everything but
# which causes other packages not to be able to find its
# headers.
#
- echo "Downloading, building, and installing libpng:"
- curl -O ftp://ftp.simplesystems.org/pub/libpng/png/src/libpng-$PNG_VERSION.tar.xz
- xzcat libpng-$PNG_VERSION.tar.xz | tar xf - || exit 1
- cd libpng-$PNG_VERSION
- ./configure || exit 1
- make -j 3 || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
+ if [ ! -f libpng-$PNG_VERSION-done ] ; then
+ echo "Downloading, building, and installing libpng:"
+ [ -f libpng-$PNG_VERSION.tar.xz ] || curl -O ftp://ftp.simplesystems.org/pub/libpng/png/src/libpng-$PNG_VERSION.tar.xz
+ xzcat libpng-$PNG_VERSION.tar.xz | tar xf - || exit 1
+ cd libpng-$PNG_VERSION
+ ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch libpng-$PNG_VERSION-done
+ fi
#
# The libpixman that comes with the X11 for Leopard is too old
# to support Cairo's image surface backend feature (which requires
# pixman-1 >= 0.22.0).
#
- echo "Downloading, building, and installing pixman:"
- curl -O http://www.cairographics.org/releases/pixman-$PIXMAN_VERSION.tar.gz
- gzcat pixman-$PIXMAN_VERSION.tar.gz | tar xf - || exit 1
- cd pixman-$PIXMAN_VERSION
- ./configure || exit 1
- make -j 3 || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
+ if [ ! -f pixman-$PIXMAN_VERSION-done ] ; then
+ echo "Downloading, building, and installing pixman:"
+ [ -f pixman-$PIXMAN_VERSION.tar.gz ] || curl -O http://www.cairographics.org/releases/pixman-$PIXMAN_VERSION.tar.gz
+ gzcat pixman-$PIXMAN_VERSION.tar.gz | tar xf - || exit 1
+ cd pixman-$PIXMAN_VERSION
+ ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch pixman-$PIXMAN_VERSION-done
+ fi
#
# And now Cairo itself.
#
- echo "Downloading, building, and installing Cairo:"
- CAIRO_MAJOR_VERSION="`expr $CAIRO_VERSION : '\([0-9][0-9]*\).*'`"
- CAIRO_MINOR_VERSION="`expr $CAIRO_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
- CAIRO_DOTDOT_VERSION="`expr $CAIRO_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
- if [[ $CAIRO_MAJOR_VERSION -gt 1 ||
- $CAIRO_MINOR_VERSION -gt 12 ||
- ($CAIRO_MINOR_VERSION -eq 12 && $CAIRO_DOTDOT_VERSION -ge 2) ]]
- then
+ if [ ! -f cairo-$CAIRO_VERSION-done ] ; then
+ echo "Downloading, building, and installing Cairo:"
+ CAIRO_MAJOR_VERSION="`expr $CAIRO_VERSION : '\([0-9][0-9]*\).*'`"
+ CAIRO_MINOR_VERSION="`expr $CAIRO_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ CAIRO_DOTDOT_VERSION="`expr $CAIRO_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ if [[ $CAIRO_MAJOR_VERSION -gt 1 ||
+ $CAIRO_MINOR_VERSION -gt 12 ||
+ ($CAIRO_MINOR_VERSION -eq 12 && $CAIRO_DOTDOT_VERSION -ge 2) ]]
+ then
#
# Starting with Cairo 1.12.2, the tarballs are compressed with
# xz rather than gzip.
#
- curl -O http://cairographics.org/releases/cairo-$CAIRO_VERSION.tar.xz || exit 1
- xzcat cairo-$CAIRO_VERSION.tar.xz | tar xf - || exit 1
- else
- curl -O http://cairographics.org/releases/cairo-$CAIRO_VERSION.tar.gz || exit 1
- tar xf cairo-$CAIRO_VERSION.tar.gz || exit 1
+ [ -f cairo-$CAIRO_VERSION.tar.xz ] || curl -O http://cairographics.org/releases/cairo-$CAIRO_VERSION.tar.xz || exit 1
+ xzcat cairo-$CAIRO_VERSION.tar.xz | tar xf - || exit 1
+ else
+ [ -f cairo-$CAIRO_VERSION.tar.gz ] || curl -O http://cairographics.org/releases/cairo-$CAIRO_VERSION.tar.gz || exit 1
+ gzcat cairo-$CAIRO_VERSION.tar.gz | tar xf - || exit 1
+ fi
+ cd cairo-$CAIRO_VERSION
+ #./configure --enable-quartz=no || exit 1
+ # Maybe follow http://cairographics.org/end_to_end_build_for_mac_os_x/
+ ./configure --enable-quartz=yes || exit 1
+ #
+ # We must avoid the version of libpng that comes with X11; the
+ # only way I've found to force that is to forcibly set INCLUDES
+ # when we do the build, so that this comes before CAIRO_CFLAGS,
+ # which has -I/usr/X11/include added to it before anything
+ # connected to libpng is.
+ #
+ INCLUDES="-I/usr/local/include/libpng15" make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch cairo-$CAIRO_VERSION-done
fi
- cd cairo-$CAIRO_VERSION
- #./configure --enable-quartz=no || exit 1
- # Maybe follow http://cairographics.org/end_to_end_build_for_mac_os_x/
- ./configure --enable-quartz=yes || exit 1
- #
- # We must avoid the version of libpng that comes with X11; the
- # only way I've found to force that is to forcibly set INCLUDES
- # when we do the build, so that this comes before CAIRO_CFLAGS,
- # which has -I/usr/X11/include added to it before anything
- # connected to libpng is.
- #
- INCLUDES="-I/usr/local/include/libpng15" make -j 3 || exit 1
- $DO_MAKE_INSTALL || exit 1
- cd ..
fi
-echo "Downloading, building, and installing ATK:"
-atk_dir=`expr $ATK_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
-curl -O http://ftp.gnome.org/pub/gnome/sources/atk/$atk_dir/atk-$ATK_VERSION.tar.xz || exit 1
-xzcat atk-$ATK_VERSION.tar.xz | tar xf - || exit 1
-cd atk-$ATK_VERSION
-./configure || exit 1
-make -j 3 || exit 1
-$DO_MAKE_INSTALL || exit 1
-cd ..
-
-echo "Downloading, building, and installing Pango:"
-pango_dir=`expr $PANGO_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
-PANGO_MAJOR_VERSION="`expr $PANGO_VERSION : '\([0-9][0-9]*\).*'`"
-PANGO_MINOR_VERSION="`expr $PANGO_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
-if [[ $PANGO_MAJOR_VERSION -gt 1 ||
- $PANGO_MINOR_VERSION -ge 29 ]]
-then
+if [ ! -f atk-$ATK_VERSION-done ] ; then
+ echo "Downloading, building, and installing ATK:"
+ atk_dir=`expr $ATK_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
+ [ -f atk-$ATK_VERSION.tar.xz ] || curl -O http://ftp.gnome.org/pub/gnome/sources/atk/$atk_dir/atk-$ATK_VERSION.tar.xz || exit 1
+ xzcat atk-$ATK_VERSION.tar.xz | tar xf - || exit 1
+ cd atk-$ATK_VERSION
+ ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch atk-$ATK_VERSION-done
+fi
+
+if [ ! -f pango-$PANGO_VERSION-done ] ; then
+ echo "Downloading, building, and installing Pango:"
+ pango_dir=`expr $PANGO_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
+ PANGO_MAJOR_VERSION="`expr $PANGO_VERSION : '\([0-9][0-9]*\).*'`"
+ PANGO_MINOR_VERSION="`expr $PANGO_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ if [[ $PANGO_MAJOR_VERSION -gt 1 ||
+ $PANGO_MINOR_VERSION -ge 29 ]]
+ then
#
# Starting with Pango 1.29, the tarballs are compressed with
# xz rather than bzip2.
#
- curl -L -O http://ftp.gnome.org/pub/gnome/sources/pango/$pango_dir/pango-$PANGO_VERSION.tar.xz
+ [ -f pango-$PANGO_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/pango/$pango_dir/pango-$PANGO_VERSION.tar.xz || exit 1
xzcat pango-$PANGO_VERSION.tar.xz | tar xf - || exit 1
-else
- curl -L -O http://ftp.gnome.org/pub/gnome/sources/pango/$pango_dir/pango-$PANGO_VERSION.tar.bz2
- tar xf pango-$PANGO_VERSION.tar.bz2 || exit 1
+ else
+ [ -f pango-$PANGO_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/pango/$pango_dir/pango-$PANGO_VERSION.tar.bz2 || exit 1
+ gzcat pango-$PANGO_VERSION.tar.bz2 | tar xf - || exit 1
+ fi
+ cd pango-$PANGO_VERSION
+ ./configure || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch pango-$PANGO_VERSION-done
fi
-cd pango-$PANGO_VERSION
-./configure || exit 1
-make -j 3 || exit 1
-$DO_MAKE_INSTALL || exit 1
-cd ..
-
-echo "Downloading, building, and installing gdk-pixbuf:"
-gdk_pixbuf_dir=`expr $GDK_PIXBUF_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
-curl -L -O http://ftp.gnome.org/pub/gnome/sources/gdk-pixbuf/$gdk_pixbuf_dir/gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz || exit 1
-xzcat gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz | tar xf - || exit 1
-cd gdk-pixbuf-$GDK_PIXBUF_VERSION
-./configure --without-libtiff --without-libjpeg || exit 1
-make -j 3 || exit 1
-$DO_MAKE_INSTALL || exit 1
-cd ..
-
-echo "Downloading, building, and installing GTK+:"
-gtk_dir=`expr $GTK_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
-GTK_MAJOR_VERSION="`expr $GTK_VERSION : '\([0-9][0-9]*\).*'`"
-GTK_MINOR_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
-GTK_DOTDOT_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
-if [[ $GTK_MAJOR_VERSION -gt 2 ||
- $GTK_MINOR_VERSION -gt 24 ||
- ($GTK_MINOR_VERSION -eq 24 && $GTK_DOTDOT_VERSION -ge 5) ]]
-then
+
+if [ ! -f gdk-pixbuf-$GDK_PIXBUF_VERSION-done ] ; then
+ echo "Downloading, building, and installing gdk-pixbuf:"
+ gdk_pixbuf_dir=`expr $GDK_PIXBUF_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
+ [ -f gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/gdk-pixbuf/$gdk_pixbuf_dir/gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz || exit 1
+ xzcat gdk-pixbuf-$GDK_PIXBUF_VERSION.tar.xz | tar xf - || exit 1
+ cd gdk-pixbuf-$GDK_PIXBUF_VERSION
+ ./configure --without-libtiff --without-libjpeg || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch gdk-pixbuf-$GDK_PIXBUF_VERSION-done
+fi
+
+if [ ! -f gtk+-$GTK_VERSION-done ] ; then
+ echo "Downloading, building, and installing GTK+:"
+ gtk_dir=`expr $GTK_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
+ GTK_MAJOR_VERSION="`expr $GTK_VERSION : '\([0-9][0-9]*\).*'`"
+ GTK_MINOR_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ GTK_DOTDOT_VERSION="`expr $GTK_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
+ if [[ $GTK_MAJOR_VERSION -gt 2 ||
+ $GTK_MINOR_VERSION -gt 24 ||
+ ($GTK_MINOR_VERSION -eq 24 && $GTK_DOTDOT_VERSION -ge 5) ]]
+ then
#
# Starting with GTK+ 2.24.5, the tarballs are compressed with
# xz rather than gzip, in addition to bzip2; use xz, as we've
# built and installed it, and as xz compresses better than
# bzip2 so the tarballs take less time to download.
#
- curl -L -O http://ftp.gnome.org/pub/gnome/sources/gtk+/$gtk_dir/gtk+-$GTK_VERSION.tar.xz
+ [ -f gtk+-$GTK_VERSION.tar.xz ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/gtk+/$gtk_dir/gtk+-$GTK_VERSION.tar.xz || exit 1
xzcat gtk+-$GTK_VERSION.tar.xz | tar xf - || exit 1
-else
- curl -L -O http://ftp.gnome.org/pub/gnome/sources/gtk+/$gtk_dir/gtk+-$GTK_VERSION.tar.bz2
- tar xf gtk+-$GTK_VERSION.tar.bz2 || exit 1
-fi
-cd gtk+-$GTK_VERSION
-if [ $DARWIN_MAJOR_VERSION -ge "12" ]
-then
+ else
+ [ -f gtk+-$GTK_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnome.org/pub/gnome/sources/gtk+/$gtk_dir/gtk+-$GTK_VERSION.tar.bz2 || exit 1
+ gzcat gtk+-$GTK_VERSION.tar.bz2 | tar xf - || exit 1
+ fi
+ cd gtk+-$GTK_VERSION
+ if [ $DARWIN_MAJOR_VERSION -ge "12" ]
+ then
#
# GTK+ 2.24.10, at least, doesn't build on Mountain Lion with the
# CUPS printing backend - either the CUPS API changed incompatibly
# (12 is the Darwin major version number in Mountain Lion.)
#
./configure --disable-cups || exit 1
-else
+ else
./configure || exit 1
+ fi
+ make $MAKE_BUILD_OPTS || exit 1
+ $DO_MAKE_INSTALL || exit 1
+ cd ..
+ touch gtk+-$GTK_VERSION-done
fi
-make -j 3 || exit 1
-$DO_MAKE_INSTALL || exit 1
-cd ..
#
# Now we have reached a point where we can build everything including
# the default is to download them all.
#
-if [ ! -z $LIBSMI_VERSION ]
-then
+if [ "$LIBSMI_VERSION" -a ! -f libsmi-$LIBSMI_VERSION-done ] ; then
echo "Downloading, building, and installing libsmi:"
- curl -L -O ftp://ftp.ibr.cs.tu-bs.de/pub/local/libsmi/libsmi-$LIBSMI_VERSION.tar.gz || exit 1
- tar xf libsmi-$LIBSMI_VERSION.tar.gz || exit 1
+ [ -f libsmi-$LIBSMI_VERSION.tar.gz ] || curl -L -O ftp://ftp.ibr.cs.tu-bs.de/pub/local/libsmi/libsmi-$LIBSMI_VERSION.tar.gz || exit 1
+ gzcat libsmi-$LIBSMI_VERSION.tar.gz | tar xf - || exit 1
cd libsmi-$LIBSMI_VERSION
./configure || exit 1
- make -j 3 || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
+ touch libsmi-$LIBSMI_VERSION-done
fi
-if [ ! -z $LIBGPG_ERROR_VERSION ]
-then
+if [ "$LIBGPG_ERROR_VERSION" -a ! -f libgpg-error-$LIBGPG_ERROR_VERSION-done ] ; then
echo "Downloading, building, and installing libgpg-error:"
- curl -L -O ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 || exit 1
+ [ -f libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 ] || curl -L -O ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 || exit 1
bzcat libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 | tar xf - || exit 1
cd libgpg-error-$LIBGPG_ERROR_VERSION
./configure || exit 1
- make -j 3 || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
+ touch libgpg-error-$LIBGPG_ERROR_VERSION-done
fi
-if [ ! -z $LIBGCRYPT_VERSION ]
-then
+if [ "$LIBGCRYPT_VERSION" -a ! -f libgcrypt-$LIBGCRYPT_VERSION-done ] ; then
#
# libgpg-error is required for libgcrypt.
#
fi
echo "Downloading, building, and installing libgcrypt:"
- curl -L -O ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-$LIBGCRYPT_VERSION.tar.gz || exit 1
- tar xf libgcrypt-$LIBGCRYPT_VERSION.tar.gz || exit 1
+ [ -f libgcrypt-$LIBGCRYPT_VERSION.tar.gz ] || curl -L -O ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-$LIBGCRYPT_VERSION.tar.gz || exit 1
+ gzcat libgcrypt-$LIBGCRYPT_VERSION.tar.gz | tar xf - || exit 1
cd libgcrypt-$LIBGCRYPT_VERSION
#
# The assembler language code is not compatible with the OS X
# x86 assembler (or is it an x86-64 vs. x86-32 issue?).
#
./configure --disable-asm || exit 1
- make -j 3 || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
+ touch libgcrypt-$LIBGCRYPT_VERSION-done
fi
-if [ ! -z $GNUTLS_VERSION ]
-then
+if [ "$GNUTLS_VERSION" -a ! -f gnutls-$GNUTLS_VERSION-done ] ; then
#
# GnuTLS requires libgcrypt (or nettle, in newer versions).
#
fi
echo "Downloading, building, and installing GnuTLS:"
- curl -L -O http://ftp.gnu.org/gnu/gnutls/gnutls-$GNUTLS_VERSION.tar.bz2 || exit 1
+ [ -f gnutls-$GNUTLS_VERSION.tar.bz2 ] || curl -L -O http://ftp.gnu.org/gnu/gnutls/gnutls-$GNUTLS_VERSION.tar.bz2 || exit 1
bzcat gnutls-$GNUTLS_VERSION.tar.bz2 | tar xf - || exit 1
cd gnutls-$GNUTLS_VERSION
#
# Wireshark directly use libgcrypt routines?
#
./configure --with-libgcrypt --without-p11-kit || exit 1
- make -j 3 || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
#
# The pkgconfig file for GnuTLS says "requires zlib", but OS X,
# while it supplies zlib, doesn't supply a pkgconfig file for
patch -p0 lib/gnutls.pc.in <../../macosx-support-lib-patches/gnutls-pkgconfig.patch || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
+ touch gnutls-$GNUTLS_VERSION-done
fi
-if [ ! -z $LUA_VERSION ]
-then
+if [ "$LUA_VERSION" -a ! -f lua-$LUA_VERSION-done ] ; then
echo "Downloading, building, and installing Lua:"
- curl -L -O http://www.lua.org/ftp/lua-$LUA_VERSION.tar.gz || exit 1
- tar xf lua-$LUA_VERSION.tar.gz || exit 1
+ [ -f lua-$LUA_VERSION.tar.gz ] || curl -L -O http://www.lua.org/ftp/lua-$LUA_VERSION.tar.gz || exit 1
+ gzcat lua-$LUA_VERSION.tar.gz | tar xf - || exit 1
cd lua-$LUA_VERSION
- make -j 3 macosx || exit 1
+ make $MAKE_BUILD_OPTS macosx || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
+ touch lua-$LUA_VERSION-done
fi
-if [ ! -z $PORTAUDIO_VERSION ]
-then
+if [ "$PORTAUDIO_VERSION" -a ! -f portaudio-done ] ; then
echo "Downloading, building, and installing PortAudio:"
- curl -L -O http://www.portaudio.com/archives/$PORTAUDIO_VERSION.tgz || exit 1
- tar xf $PORTAUDIO_VERSION.tgz || exit 1
+ [ -f $PORTAUDIO_VERSION.tgz ] || curl -L -O http://www.portaudio.com/archives/$PORTAUDIO_VERSION.tgz || exit 1
+ gzcat $PORTAUDIO_VERSION.tgz | tar xf - || exit 1
cd portaudio
#
# Un-comment an include that's required on Lion.
# deprecation warnings.
#
CFLAGS="$CFLAGS -mmacosx-version-min=10.4" ./configure --disable-mac-universal || exit 1
- make -j 3 || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
+ touch portaudio-done
fi
-if [ ! -z $GEOIP_VERSION ]
+if [ "$GEOIP_VERSION" -a ! -f geoip-$GEOIP_VERSION-done ]
then
echo "Downloading, building, and installing GeoIP API:"
- curl -L -O http://geolite.maxmind.com/download/geoip/api/c/GeoIP-$GEOIP_VERSION.tar.gz || exit 1
- tar xf GeoIP-$GEOIP_VERSION.tar.gz || exit 1
+ [ -f GeoIP-$GEOIP_VERSION.tar.gz ] || curl -L -O http://geolite.maxmind.com/download/geoip/api/c/GeoIP-$GEOIP_VERSION.tar.gz || exit 1
+ gzcat GeoIP-$GEOIP_VERSION.tar.gz | tar xf - || exit 1
cd GeoIP-$GEOIP_VERSION
./configure || exit 1
#
iconv -f iso8859-1 -t utf-8 man/"$i" >man/"$i".tmp &&
mv man/"$i".tmp man/"$i"
done
- make -j 3 || exit 1
+ make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
+ touch geoip-$GEOIP_VERSION-done
fi
echo ""
echo "mkdir build; cd build"
echo "../configure"
echo ""
-echo "make -j 3"
+echo "make $MAKE_BUILD_OPTS"
echo "make install"
echo ""
git.samba.org / metze / wireshark / wip.git / commitdiff