ARM: dts: imx6sl-evk: Use #pwm-cells = <3> for imx27-pwm device

The binding dictates using 3 pwm-cells. Adhere to that.

This fixes the following dtbs_check warning:

	arch/arm/boot/dts/nxp/imx/imx6sl-evk.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#

There is no need for an explicit status = "okay" in the pwm node as
the soc dtsi doesn't disable these devices. Drop this property, too.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts
index 239bc6dfc5846475b17ccbf080030959c43eddf2..31eee0419af71c628c1b2849fa944e30df891af8 100644 (file)
--- a/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts
@@ -23,7 +23,7 @@
 
        backlight_display: backlight_display {
                compatible = "pwm-backlight";
-               pwms = <&pwm1 0 5000000>;
+               pwms = <&pwm1 0 5000000 0>;
                brightness-levels = <0 4 8 16 32 64 128 255>;
                default-brightness-level = <6>;
        };
@@ -584,10 +584,8 @@
 };
 
 &pwm1 {
-       #pwm-cells = <2>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_pwm1>;
-       status = "okay";
 };
 
 &reg_vdd1p1 {