ctdb-tests: New function setup_script_options()

Currently exports the variable assignment on each line.  Later this
can be changed to handle actual per-script configuration.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-scripts: Split CTDB configuration loading

loadconfig() currently tries to load the CTDB configuration and also
any system configuration relevant to the current (event) script.

Instead add a new function load_system_config() to load the
distribution-specific system configuration for a component.  Call this
directly in the rare scripts that need the system configuration.

Also call load_system_config when loading the CTDB configuration to
pull in anything from the CTDB system configuration.  This is partly
for backward compatibility but also to get options that can be used
anywhere.

loadconfig() no longer takes an argument.  It simply loads the CTDB
configuration.

Drop support for falling back to /etc/ctdb/sysconfig/ctdb (or
similar).  Surely there's nobody who uses that!

Also, drop the indirection where loadconfig() calls _loadconfig().
This was used years ago as a test hook and is no longer required.

Inexplicably, this change introduces a new shellcheck test failure, so
silence this.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-docs: Promote CTDB_INIT_STYLE to global options section

Clarify that the global options should be set in the system
configuration file.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-scripts: Clean up function detect_init_style()

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Remove unused functions and stubs

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: statd-callout script setup modularisation

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 91.lvs event script setup modularisation

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 60.nfs (and 06.nfs) event script setup modularisation

Includes gratuitous changes to get lines below 80 columns.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 50.samba event script setup modularisation

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 49.winbind event script setup modularisation

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 41.httpd event script setup modularisation

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 40.vsftpd event script setup modularisation

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 31.clamd event script setup modularisation

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 20.multipathd event script setup modularisation

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 13.per_ip_routing event script setup modularisation

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 11.natgw event script setup modularisation

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 10.interface event script setup modularisation

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 05.system event script setup modularisation

Do initial test setup using setup() function.  Rename usage setting
functions to make them more obvious.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 01.reclock event script setup modularisation

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 00.ctdb testing setup modularisation

Switch to generic setup() function and set variables there.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Define generic setup() function

Create default setup() function that aborts.  This function will be
redefined by each support script and used to do the setup.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: statd-callout.sh simple 80 column fixups

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 60.nfs.sh simple 80 column fixups and reordering

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 20.multipathd.sh 80 column fixups

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 11.natgw.sh simple 80 column fixups

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 10.interface.sh simple 80 column fixups

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: 05.system.sh simple 80 column fixups

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Create statd-callout.sh

Contains testing support used only by tests for statd-callout script.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Create 91.lvs.sh

Contains testing support used only by tests for 91.lvs event scripts.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Create 60.nfs.sh and 06.nfs.sh

Contains testing support used only by tests for 60.nfs and 06.nfs
event scripts.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Create 50.samba.sh

Contains testing support used only by tests for 50.samba event script.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Create 49.winbind.sh

Contains testing support used only by tests for 49.winbind event
script.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Create 41.httpd.sh

Contains testing support used only by tests for 41.httpd event script.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Create 40.vsftpd.sh

Contains testing support used only by tests for 40.vsftpd event
script.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Create 20.multipathd.sh

Contains testing support used only by tests for 20.multipathd event
script.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Create 13.per_ip_routing.sh

Contains testing support used only by tests for 13.per_ip_routing
event script.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Create 11.natgw.sh

Contains testing support used only by tests for 11.natgw event script.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Create 10.interface.sh

Contains testing support used only by tests for 10.interface event
script.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Create 05.system.sh

Contains testing support used only by tests for 05.system event script.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Create 01.reclock.sh

Contains testing support used only by tests for 01.reclock event
script.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Create 00.ctdb.sh

Contains testing support used only by tests for 00.ctdb event script.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Allow modularisation of event script testing support

local.sh is enormous.  Allow per-event-script customisation.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Clean up handling of CTDB_SCRIPT_VARDIR

Only set this in ctdb_set_pnn() and always use the PNN in the path.

Generic setup functions like setup_ctdb() will go away soon in favour
of more doing setup that is specific to the script being tested.
Therefore, call ctdb_set_pnn() in define_test() to ensure that
CTDB_SCRIPT_VARDIR is always set.  Note that setup_ctdb() is never
called with an argument so the default PNN has always been 0.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Clean up fake share handling

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: New function setup_numnodes()

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Tweak debug function

Output to stderr.  Read from stdin if no arguments given, making it
possible to handle long lines using here documents.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Make date handling consistent in 00.ctdb tests

This duplicates the filter function but that will be fixed later.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: New support functions setup_dbdir() and setup_date()

For now, these need to be called from setup_generic() to stop tests
from breaking.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Don't set FAKE_ETHTOOL_LINK_DOWN globally

This variable doesn't need to be set in a generic function and can be
set by the ethtool support functions

This is now a subdirectory of FAKE_NETWORK_STATE.

The down/up functions get reindented because the new 1st line should
be indented according to the new script indent-with-tabs style.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Move variable FAKE_IP_STATE into the ip stub

It is the only user of this variable.

This is now a subdirectory of FAKE_NETWORK_STATE.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Move variable FAKE_CTDB_IFACES_DOWN into ctdb stub

It is the only user of this variable.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Remove case statement in ctdb stub

This removes a lot of unnecessary clutter.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Update argument handling of ctdb stub functions

All functions are now called after shifting away the command name.

There is less churn that expected because some functions don't use any
arguments.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Move ctdb stub code from case statement to functions

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Drop unused ctdb stub scriptstatus and xpnn commands

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Fix a bug in the ctdb stub's moveip command

This was writing garbage into the IP layout file and relevant tests
were passing by luck.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: New global variable FAKE_NETWORK_STATE

Stash all the network state in this directory.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-tests: Make FAKE_CTDB_STATE globally set

Lots of things depend on it.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-scripts: Drop unused functions

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

ctdb-script: Drop CTDB_MANAGED_SERVICES configuration option

This seems never to have caught on so reduce complexity.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>

selftest: Run net.api.become.dc against less roles

This test is slower than many and need not be run five times.

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Mar 28 01:53:56 CEST 2018 on sn-devel-144

selftest: Do not run *.lock tests against both nt4_dc and ad_dc

This part of the protocol is not changed by being an AD DC.

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

selftest: Move slow raw_protocol test to chgdcpass environment

The ad_dc environment is busy and we need to keep it under 50mins for travis CI, so run
this on a different environment with a shorter runtime.

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

gitlab-ci: Split up build_samba_others and build_ctdb tasks

These make too much output and the shared runners on GitLab CI object to
sending more than 4MB of output.

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

selftest: Do not run krb5.kdc machine account test against ad_dc

This code is already well tested against fl2008r2dc and just as per
8f1557a2c43e287c07723c16be78e1d858f4111d this test is slow and we can afford to be
more selective here.

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

selftest: Do not run raw.notify, smb2.oplock and raw.oplock twice

These are slower tests that do not need to be run against the ad_dc configuration
in particular.

This saves time in the ad_dc job which needs to stay under 50mins to
pass on travis-ci (and faster tests are better for everyone anyway).

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

autobuild: Run all envs that depend on ad_dc in the ad_dc job

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

gitlab: Run fileserver tests on "private" not "shared"

This might make the delaywrite tests pass

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

autobuild: Split up the build further with samba-ad-dc-2

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

gitlab-ci: Set shared and private tags to allow builds that need ext4 to pass

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

selftest: Move samba.tests.samba_tool{.dnscmd,.sites} to chgdcpass

This helps reduce the runtime of ad_dc which needs to be under 50mins
including build time to run on travis-ci.

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

selftest: Move slower base.deny1 and base.deny2 to fileserver environment

This avoids these running in the ad_dc environment which we need to get under 50mins for
travis-ci.

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

autobuild: Try and test different configure options for new environments

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

Move smbtorture3 tests to fileserver environment

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

selftest: Move base.delaywrite tests to fileserver environment

This aims to keep the ad_dc tests well below 50mins for travis CI and
base.delaywrite is very slow.

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

autobuild: Remove fileserver tests from the main build

Again, this is to allow these to run in the 50min timelimit
of travis-ci and so gain test coverage.

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

autobuild: Run all "ad_dc" environment tests in samba-ad-dc

This allows us not to run ad_dc tests in the main build, making the
autobuild process faster.  The ad_dc tests run in less than 50mins
on travis-ci, which allows this part of the tests to be run.

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

selftest: Do not run smb2.notify against nt4_dc and ad_dc

This is a slow test and we need to keep the time on ad_dc down to below 50mins total
for travis-ci.

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

gitlab-ci: Add samba-nt4 environment to the CI

This parallel build is de-coupled from the main samba build

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

travis-ci: Run new samba-nt4 environment

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

autobuild: Run nt4_dc and nt4_member tests in parallel

These do not interact with the main AD DC environments, so can run in parallel

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

gitlab-ci: add git variable to speed up clone

Set GIT_STATEGY to fetch, and GIT_DEPTH to 3.
This will speed up cloning for repos.

Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

gitlab-ci: set docker image and change tag

1. Specify docker image to use in gitlab-ci.yml
2. Change tag autobuild to docker

So we can use gitlab.com shared runners.

Signed-off-by: Joe Guo <joeg@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

gitlab-ci: Create swap space to work around the 2G image

Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>

Allow AESNI to be used on all processor supporting AESNI, not just Intel's This improves performance/reduced CPU usage. Tests performed: - Ran on Ivy Bridge and Ryzen and verified that AESNI is detected (crypto tests) - Ran on Ryzen, and observed 50% increased speed.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13302

Signed-off-by: Eric Vannier <evannier@google.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Björn Jacke <bjacke@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Mar 27 13:50:09 CEST 2018 on sn-devel-144

ctdb-tests: Don't expand octal escapes in unit test output

The echo command in dash expands octal escapes in strings by default
but the echo command in bash doesn't.  Since the behaviour is
ill-defined, use printf to handle affected strings.  However, ensure
that these strings aren't used as format strings.

Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Mar 27 09:06:14 CEST 2018 on sn-devel-144

ctdb-tests: Add debug messages for unimplemented functions

Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>

ctdb-tests: Add database traverse tests

Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>

ctdb-tests: Implement traverse control in fake_ctdbd

Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>

ctdb-tests: Add persistent database tests

Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>

ctdb-tests: Implement transaction control in fake_ctdbd

Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>

ctdb-tests: Add volatile database tests

Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>

ctdb-tests: Add req_call processing in fake_ctdbd

Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>

ctdb-tests: Use seqnum from tdb if available in fake_ctdbd

This also adds the lower level ltdb read/write functions required to
read seqnum from database.

Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>

ctdb-tests: Add database attach tests

Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>

ctdb-tests: Implement database attach control in fake_ctdbd

Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>

ctdb-tests: Add dbdir option for creating databases in fake_ctdbd

Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>

ctdb-tests: Convert database map to a linked list in fake_ctdbd

Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>

ctdb-client: Add missing initialization of tevent_context

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13356

Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>

ctdb-client: Do not try to allocate 0 sized record

BUG: https://bugzilla.samba.org/show_bug.cgi?id=13356

Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>