Michael Adam [Thu, 2 Feb 2012 12:38:08 +0000 (13:38 +0100)]
s4:torture:smb2: talloc_free the right tree structure in secondary_tcon()
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 2 Feb 2012 12:36:20 +0000 (13:36 +0100)]
s4:torture:smb2: check for success of talloc in secondary_tcon()
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Michael Adam [Thu, 2 Feb 2012 14:56:48 +0000 (15:56 +0100)]
s4:torture:smb2:notify: remove an unused variable
Michael Adam [Thu, 2 Feb 2012 14:53:26 +0000 (15:53 +0100)]
s4:torture:smb2:notify: remove an unused variable
Michael Adam [Thu, 2 Feb 2012 14:42:16 +0000 (15:42 +0100)]
s4:torture:smb2: remove an unused variable from torture_smb2_setinfo()
Michael Adam [Thu, 2 Feb 2012 23:21:50 +0000 (00:21 +0100)]
loadparm: fix a load of uninitialized memory errors found by valgrind.
Matthieu Patou [Sat, 28 Jan 2012 00:12:52 +0000 (16:12 -0800)]
s3-nmbd: don't discard DGRAM frames from local addresses when we are a DC
Winbind use netbios to locate the DC, if samba is also a DC then nmbd
receive request from Winbind that are from a local address, those
requests must not be discarded otherwise winbind can't find the DC and
won't try another method.
Autobuild-User: Matthieu Patou <mat@samba.org>
Autobuild-Date: Fri Feb 3 11:09:29 CET 2012 on sn-devel-104
Matthieu Patou [Wed, 25 Jan 2012 05:29:11 +0000 (21:29 -0800)]
s3-pid: Catch with pid filename's change when config file is not smb.conf
This is what is done in pidfile_create
Amitay Isaacs [Fri, 3 Feb 2012 01:04:32 +0000 (12:04 +1100)]
selftest: Fix the exit code of make test when run in buildfarm
When make test is run in buildfarm environment (RUN_FROM_BUILD_FARM=1),
last process in make test pipeline is subunit-filter. This subunit-filter
is responsible for converting failure test result to xfail for known
failures. While converting failures to xfail, it sets exitcode=1. If
this is the last process in the pipeline make test fails, which is
the observed behavior in buildfarm.
In autobuild, there is additional process in the pipeline format-subunit
which processes the output of subunit-filter and correctly terminates
with exit code=0. The buildfarm make test failure is fixed by adding
extra filter-subunit in the pipeline, as the extra filter-subunit
exits correctly with exit code=0.
Autobuild-User: Amitay Isaacs <amitay@samba.org>
Autobuild-Date: Fri Feb 3 07:00:04 CET 2012 on sn-devel-104
Jeremy Allison [Fri, 3 Feb 2012 00:28:39 +0000 (16:28 -0800)]
Only ask for specific permissions required when setting an ACL.
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Fri Feb 3 03:07:33 CET 2012 on sn-devel-104
Jeremy Allison [Fri, 3 Feb 2012 00:28:06 +0000 (16:28 -0800)]
Allow a SACL to be sent in cli_set_secdesc().
Volker Lendecke [Thu, 2 Feb 2012 19:32:07 +0000 (20:32 +0100)]
s3: Test for faulty xattr_tdb listxattr
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Thu Feb 2 22:10:49 CET 2012 on sn-devel-104
Volker Lendecke [Thu, 2 Feb 2012 17:11:32 +0000 (18:11 +0100)]
s3-xattr_tdb: Fix listxattr
We have to tell the caller how many bytes we actually want
Volker Lendecke [Thu, 2 Feb 2012 18:41:56 +0000 (19:41 +0100)]
s3-vfstest: Add removexattr
Volker Lendecke [Thu, 2 Feb 2012 18:36:00 +0000 (19:36 +0100)]
s3-vfstest: Add setxattr
Volker Lendecke [Thu, 2 Feb 2012 16:45:09 +0000 (17:45 +0100)]
s3-vfstest: Add listxattr
Volker Lendecke [Thu, 2 Feb 2012 15:36:18 +0000 (16:36 +0100)]
s3-vfstest: Add getxattr
Volker Lendecke [Thu, 2 Feb 2012 17:30:40 +0000 (18:30 +0100)]
s3: Move stream_depot test to script/tests
Volker Lendecke [Thu, 2 Feb 2012 16:49:22 +0000 (17:49 +0100)]
s3: Use ARRAY_SIZE in bsd_attr_list
Volker Lendecke [Wed, 1 Feb 2012 19:40:06 +0000 (20:40 +0100)]
s3: Simplify streams_depot a bit
b0c0b949 is a bit involved. Passing down booleans is almost never
very clear
Volker Lendecke [Thu, 2 Feb 2012 15:24:30 +0000 (16:24 +0100)]
s3-vfstest: Fix an uninitialized read in close
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Thu Feb 2 18:00:58 CET 2012 on sn-devel-104
Volker Lendecke [Thu, 2 Feb 2012 15:23:40 +0000 (16:23 +0100)]
s3-vfstest: Fix a double-free on closing a file
"mem_ctx" will be gone after we leave the routine
Stefan Metzmacher [Wed, 1 Feb 2012 16:04:17 +0000 (17:04 +0100)]
s3:auth: fill the sids array of the info3 in wbcAuthUserInfo_to_netr_SamInfo3() (bug #8739)
Originally, only the rid array was filled and foreign domain sids were omitted.
Pair-Programmed-With: Michael Adam <obnox@samba.org>
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Thu Feb 2 12:59:32 CET 2012 on sn-devel-104
Stefan Metzmacher [Wed, 1 Feb 2012 16:02:52 +0000 (17:02 +0100)]
s3:auth: fix potential gap creation in wbcsids_to_samr_RidWithAttributeArray()
Pair-Programmed-With: Michael Adam <obnox@samba.org>
metze
Andreas Schneider [Thu, 2 Feb 2012 07:57:28 +0000 (08:57 +0100)]
s3-libsmb: Remove dead prototype.
Autobuild-User: Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date: Thu Feb 2 10:33:13 CET 2012 on sn-devel-104
Andrew Tridgell [Thu, 2 Feb 2012 01:36:44 +0000 (12:36 +1100)]
build: fixed a link order problem
this fixes a problem found by obnox where the -L path for CUPS was put
before the path to internal libraries. The install path for CUPS
happened to be the same as for a old system libtevent, which meant we
linked against the old tevent instead of the correct one from our
private library paths.
The problem was that we were adding the -L paths directly to the
ldflags. The waf core code (in ccroot.py) only adds more paths if they
are not there already. So by adding it in ldflags it was not added at
the end of the list. The fix is just to not do the -L processing in
wafsamba and let the waf core do it in the right order
Autobuild-User: Andrew Tridgell <tridge@samba.org>
Autobuild-Date: Thu Feb 2 06:54:42 CET 2012 on sn-devel-104
Jelmer Vernooij [Thu, 2 Feb 2012 01:48:35 +0000 (02:48 +0100)]
replace: Only add bsd dependency when bsd library was found.
Autobuild-User: Jelmer Vernooij <jelmer@samba.org>
Autobuild-Date: Thu Feb 2 05:18:45 CET 2012 on sn-devel-104
Rusty Russell [Thu, 2 Feb 2012 01:06:49 +0000 (11:36 +1030)]
tdb2: add --disable-tdb2
I thought you could --disable-tdb2=false, apparently not! Thanks
Michael Adam...
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Thu Feb 2 03:43:08 CET 2012 on sn-devel-104
Christof Schmitt [Thu, 15 Dec 2011 20:53:48 +0000 (13:53 -0700)]
smbtorture: Do not leak child processes when exiting
When some child processes could not be created, smbtorture would exit
and leave the successfully started child processes running. Add a loop
to kill the existing child processes for this case.
Signed-off-by: Jeremy Allison <jra@samba.org>
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Thu Feb 2 01:35:27 CET 2012 on sn-devel-104
Andreas Schneider [Wed, 1 Feb 2012 20:50:31 +0000 (21:50 +0100)]
s3-libsmb: Remove dead gssapi code.
Autobuild-User: Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date: Wed Feb 1 23:29:44 CET 2012 on sn-devel-104
Andreas Schneider [Mon, 30 Jan 2012 09:53:18 +0000 (10:53 +0100)]
s3-lib: Fix util_cmdline which doesn't use popt.
This creates its own header file for util_cmdline so it doesn't need to
link against popt.
This should fix linking on FreeBSD.
Volker Lendecke [Wed, 1 Feb 2012 19:07:24 +0000 (20:07 +0100)]
s3: Test for bug 8733
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Wed Feb 1 21:53:50 CET 2012 on sn-devel-104
Volker Lendecke [Wed, 1 Feb 2012 18:44:32 +0000 (19:44 +0100)]
s3-vfstest: Correctly initialize the connection path
Volker Lendecke [Wed, 1 Feb 2012 18:43:46 +0000 (19:43 +0100)]
s3-vfstest: Fix some uninitialized vars
Volker Lendecke [Wed, 1 Feb 2012 18:42:55 +0000 (19:42 +0100)]
s3-vfstest: Fix some pointless statics
Volker Lendecke [Wed, 1 Feb 2012 18:34:22 +0000 (19:34 +0100)]
s3-vfstest: Fix a typo
Volker Lendecke [Wed, 1 Feb 2012 13:42:39 +0000 (14:42 +0100)]
s3-vfstest: Fix some nonblank line endings
Michael Adam [Wed, 1 Feb 2012 14:25:12 +0000 (14:25 +0000)]
s3:smbd:smb2: fix an assignment-instead-of-check bug conn_snum_used()
Accidential "=" instead of "==".
Autobuild-User: Michael Adam <obnox@samba.org>
Autobuild-Date: Wed Feb 1 17:10:15 CET 2012 on sn-devel-104
Andrew Tridgell [Wed, 1 Feb 2012 05:14:08 +0000 (16:14 +1100)]
Revert "s4-drs: do not try to contact for replication servers that are not anymore in reps*"
This reverts commit
5bfd6251eb22ff701184a95649822a73cf4d157b.
This change has been causing regular segfaults in the build farm since
it was applied. I also think it may be unnecessary as
dreplsrv_refresh_partitions() should already be achieving the same
thing (removing stale replication targets).
I think the segfaults were caused by freeing an in-flight DSA, but I
have been unable to reproduce it outside of the build farm
Autobuild-User: Andrew Tridgell <tridge@samba.org>
Autobuild-Date: Wed Feb 1 07:49:42 CET 2012 on sn-devel-104
Andrew Tridgell [Wed, 1 Feb 2012 01:54:31 +0000 (12:54 +1100)]
s4-heimdal: the ASN1 compiler now depends on libreplace
it uses strlcat(), which we now get from libbsd if available
Autobuild-User: Andrew Tridgell <tridge@samba.org>
Autobuild-Date: Wed Feb 1 05:51:56 CET 2012 on sn-devel-104
Andrew Bartlett [Tue, 31 Jan 2012 10:34:19 +0000 (21:34 +1100)]
s3-auth Remove unused nt_status_squash from auth_context
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Wed Feb 1 04:18:50 CET 2012 on sn-devel-104
Andrew Bartlett [Wed, 25 Jan 2012 22:42:27 +0000 (09:42 +1100)]
selftest: Remove unused support for --exeext
Jelmer Vernooij [Tue, 31 Jan 2012 21:31:30 +0000 (22:31 +0100)]
s3/wscript: Fix dependency on gssapi, necessary when there is no system Kerberos.
Autobuild-User: Jelmer Vernooij <jelmer@samba.org>
Autobuild-Date: Wed Feb 1 02:43:11 CET 2012 on sn-devel-104
Jelmer Vernooij [Tue, 31 Jan 2012 21:30:45 +0000 (22:30 +0100)]
source3/wscript: Expand tabs, to prevent confusion (whitespace is significant in python/waf).
Jelmer Vernooij [Tue, 31 Jan 2012 21:28:08 +0000 (22:28 +0100)]
replace: Add include for bsd/string.h.
Volker Lendecke [Tue, 31 Jan 2012 21:26:35 +0000 (22:26 +0100)]
s3: Add rmdir operation to streams_depot
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Wed Feb 1 01:05:57 CET 2012 on sn-devel-104
Volker Lendecke [Tue, 31 Jan 2012 21:26:23 +0000 (22:26 +0100)]
s3: Delete streams on directories
Volker Lendecke [Tue, 31 Jan 2012 16:47:07 +0000 (17:47 +0100)]
s3: Simplify an if-statement
is_ntfs_default_stream_smb_fname already contains all checks that
the variable "stream_name" gives us here.
Ira Cooper [Tue, 31 Jan 2012 20:15:36 +0000 (12:15 -0800)]
Fix bug #8729 - getpass regressions on Solaris/Illumos - 3.6 and
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Tue Jan 31 23:28:09 CET 2012 on sn-devel-104
Stefan Metzmacher [Tue, 31 Jan 2012 07:47:38 +0000 (08:47 +0100)]
s3:client: ignore SMBecho errors (the server may not support it) (bug #8139)
metze
Stefan Metzmacher [Tue, 31 Jan 2012 07:41:07 +0000 (08:41 +0100)]
Revert "Fix bug #8139 - smbclient fails if server does not support Echo request."
This reverts commit
1fdc96ecaff8ca12e9aa0082527468ad4242a8a9.
This is wrong in master as the error codes are different compared to
3.5.x. The correct way to handle this is to call cli_state_is_connected().
metze
Stefan Metzmacher [Sat, 14 Jan 2012 12:24:51 +0000 (13:24 +0100)]
s3:smbd: inline code in reply_sesssetup_and_X_spnego()
This makes the logic much easier to follow.
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Tue Jan 31 21:52:45 CET 2012 on sn-devel-104
Stefan Metzmacher [Sat, 14 Jan 2012 11:38:36 +0000 (12:38 +0100)]
s3:smbd: the spnego session setup don't need to copy the in blob
metze
Stefan Metzmacher [Fri, 13 Jan 2012 12:20:27 +0000 (13:20 +0100)]
s3:smbd: rework reply_spnego_ntlmssp to reply_spnego_generic
This removes the unused spnego_gen_auth_response() wrapping.
metze
Stefan Metzmacher [Fri, 13 Jan 2012 11:46:25 +0000 (12:46 +0100)]
s3:smbd: remove unused code from sesssetup.c
metze
Stefan Metzmacher [Fri, 13 Jan 2012 11:30:08 +0000 (12:30 +0100)]
s3:smbd: remove pending_auth_data logic
This is handled by the gensec_spnego module.
metze
Stefan Metzmacher [Fri, 13 Jan 2012 11:24:47 +0000 (12:24 +0100)]
s3:smbd: always use the gensec code path in sesssetup.c
The other code pathes are unused, because we always have
the spnego gensec module.
metze
Stefan Metzmacher [Wed, 25 Jan 2012 08:02:15 +0000 (09:02 +0100)]
s3:smbd: rework smbd_smb2_*_ntlmssp_auth* to smbd_smb2_auth_generic*
metze
Stefan Metzmacher [Fri, 13 Jan 2012 11:24:47 +0000 (12:24 +0100)]
s3:smbd: always use the gensec code path in smb2_sesssetup.c
The other code pathes are unused, because we always have
the spnego gensec module.
metze
Andrew Bartlett [Sat, 14 Jan 2012 04:30:34 +0000 (15:30 +1100)]
libcli/smb: Convert struct smb_trans_enc_state to talloc
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Andrew Bartlett [Sat, 14 Jan 2012 04:17:41 +0000 (15:17 +1100)]
s3-libsmb: Remove unused enum smb_trans_enc_type
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Andrew Bartlett [Sat, 14 Jan 2012 01:28:28 +0000 (12:28 +1100)]
s3-libsmb: Use gensec_spnego in smb seal client
This is intead of the inline, manual spnego code currently
in use.
Andrew Bartlett
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Andrew Bartlett [Sat, 14 Jan 2012 01:15:17 +0000 (12:15 +1100)]
s3-smbd: Use gensec_spnego in smb seal server
This is instead of the inline, manual spnego code currently
in use.
Andrew Bartlett
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Stefan Metzmacher [Thu, 12 Jan 2012 15:12:02 +0000 (16:12 +0100)]
s3:libsmb/auth_generic: make use of gensec_spnego in the client
metze
Stefan Metzmacher [Thu, 12 Jan 2012 15:12:02 +0000 (16:12 +0100)]
s3:auth/auth_generic: make use of gensec_spnego in the server
metze
Volker Lendecke [Tue, 31 Jan 2012 16:26:34 +0000 (17:26 +0100)]
s3: Unify stream testing in open_directory
The second if-statement could never have kicked in, assuming the
SMB_ASSERT above was right.
Jeremy, please check!
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Tue Jan 31 20:15:36 CET 2012 on sn-devel-104
Volker Lendecke [Tue, 31 Jan 2012 16:24:49 +0000 (17:24 +0100)]
s3: Re-indent an && sequence for better understanding
Volker Lendecke [Mon, 30 Jan 2012 17:23:49 +0000 (18:23 +0100)]
s3: Fix "smbcontrol smbd close-share"
Michael Adam [Tue, 31 Jan 2012 15:16:47 +0000 (16:16 +0100)]
s3:net ads join: remove a useless empty comment block
Autobuild-User: Michael Adam <obnox@samba.org>
Autobuild-Date: Tue Jan 31 18:37:45 CET 2012 on sn-devel-104
Michael Adam [Tue, 31 Jan 2012 15:15:54 +0000 (16:15 +0100)]
s3:net ads join: add a comment for the call to _net_ads_join_dns_update()
Michael Adam [Tue, 31 Jan 2012 00:05:14 +0000 (01:05 +0100)]
s3:net ads join: reduce indentation in _net_ads_join_dns_updates()
Michael Adam [Mon, 30 Jan 2012 23:59:21 +0000 (00:59 +0100)]
s3:net ads join: move dns update code out to new function _net_ads_join_dns_updates()
Michael Adam [Mon, 30 Jan 2012 17:04:41 +0000 (18:04 +0100)]
s3:net ads join: improve comment for dns update block
Michael Adam [Mon, 30 Jan 2012 13:15:14 +0000 (14:15 +0100)]
s3:net ads join: improve status evaluation for call to net_update_dns()
untangle assignment from check and log error code in message if failed.
Michael Adam [Mon, 30 Jan 2012 13:12:15 +0000 (14:12 +0100)]
s3:net ads join: interpret return code of ads_kinit_password() in dns update block
If failed, print according error message and skip the attempt to do dns update.
Michael Adam [Mon, 30 Jan 2012 13:07:52 +0000 (14:07 +0100)]
s3:net ads join: check for malloc success and react accordingly in dns update block
Michael Adam [Mon, 30 Jan 2012 13:05:59 +0000 (14:05 +0100)]
s3:net ads join: check for success of fetching machine password in dns update block
log and cleanup accordingly if failed
Michael Adam [Mon, 30 Jan 2012 13:00:12 +0000 (14:00 +0100)]
s3:net ads join: untangle assignment from check, fix return code and improve error logging
only the dns update failed, not the join.
Also do proper memory cleanup
Michael Adam [Mon, 30 Jan 2012 12:56:45 +0000 (13:56 +0100)]
s3:net ads join: reduce indentation and improve logging in the dns update code block
by doing an early goto done upon error condition
Michael Adam [Mon, 30 Jan 2012 12:03:59 +0000 (13:03 +0100)]
s3:net ads join: untangle assignment from check.
Michael Adam [Fri, 27 Jan 2012 13:02:07 +0000 (14:02 +0100)]
s3:net registry: fix a copy and paste error in a help text
Amitay Isaacs [Tue, 31 Jan 2012 13:58:32 +0000 (00:58 +1100)]
tevent: Fix python documentation strings
Autobuild-User: Amitay Isaacs <amitay@samba.org>
Autobuild-Date: Tue Jan 31 16:59:29 CET 2012 on sn-devel-104
Jelmer Vernooij [Tue, 31 Jan 2012 10:25:17 +0000 (11:25 +0100)]
replace: Only include C files from which there are actually functions used.
Autobuild-User: Jelmer Vernooij <jelmer@samba.org>
Autobuild-Date: Tue Jan 31 15:21:04 CET 2012 on sn-devel-104
Jelmer Vernooij [Tue, 31 Jan 2012 10:10:18 +0000 (11:10 +0100)]
replace: use libbsd for strlcat/strlcpy when available.
Amitay Isaacs [Mon, 30 Jan 2012 01:13:28 +0000 (12:13 +1100)]
s4-s3-upgrade: Check if there are duplicate sids for users and groups
Autobuild-User: Amitay Isaacs <amitay@samba.org>
Autobuild-Date: Tue Jan 31 02:23:17 CET 2012 on sn-devel-104
Amitay Isaacs [Tue, 6 Dec 2011 03:43:45 +0000 (14:43 +1100)]
s4-s3-upgrade: Use lowercase hostname as hostname for provision
Jeremy Allison [Mon, 30 Jan 2012 22:13:47 +0000 (14:13 -0800)]
Fix bug #8139 - smbclient fails if server does not support Echo request.
Based on work by Matthias Scheler <tron@NetBSD.org>
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Tue Jan 31 00:47:19 CET 2012 on sn-devel-104
Matthieu Patou [Mon, 30 Jan 2012 08:05:08 +0000 (00:05 -0800)]
s3-winbind: don't try to do clever thing if the username is not found while authenticating through winbind
This could cause that we authenticate a user with a bogus domain to
winbind's domain if the password supplied for the PAM_AUTH match.
The problem was reported by Jeff Venable (jvenable@juniper.net).
Patch from Andrew Bartlett (abartlett@samba.org).
Autobuild-User: Matthieu Patou <mat@samba.org>
Autobuild-Date: Mon Jan 30 18:58:12 CET 2012 on sn-devel-104
Matthieu Patou [Mon, 30 Jan 2012 06:12:40 +0000 (22:12 -0800)]
s3: check that a user in a bogus domain name is mapped to the localnetbios name of a domain member
This means that if we authentify for BOGUS\administrator in AD domain
FOREST with samba being domain member with the netbiosname MEMBER then
BOGUS\administrator will be mapped to MEMBER\administrator if the
password match.
Andrew Bartlett [Mon, 30 Jan 2012 03:00:58 +0000 (14:00 +1100)]
s3-auth: Remove duplicate check for NT_STATUS_IS_OK(nt_status)
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Mon Jan 30 09:38:47 CET 2012 on sn-devel-104
Andrew Bartlett [Mon, 30 Jan 2012 00:53:04 +0000 (11:53 +1100)]
gensec: inline gensec_generate_session_info() into only caller
This avoids casting to and from the struct auth_user_info_dc *user_info_dc
to to this, the
if (user_info_dc->info->authenticated)
is moved into auth_generate_session_info_wrapper(), which is the
function that gensec_security->auth_context->generate_session_info
points to.
Andrew Bartlett
Andrew Bartlett [Mon, 30 Jan 2012 00:49:23 +0000 (11:49 +1100)]
s4-auth: Return NT_STATUS_NOT_IMPLEMENTED if the challenge cannot be obtained
Andrew Bartlett [Mon, 30 Jan 2012 00:17:44 +0000 (11:17 +1100)]
auth: Make check_password and generate_session_info hook generic
gensec_ntlmssp does not need to know the internal form of the
struct user_info_dc or auth_serversupplied_info. This will allow the
calling logic to be put in common.
Andrew Bartlett
Rusty Russell [Mon, 30 Jan 2012 05:29:18 +0000 (15:59 +1030)]
tdb2: make --enable-tdb2 the default.
We still use the tdb1 on-disk format, but we do so via the tdb2 library.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Mon Jan 30 08:02:43 CET 2012 on sn-devel-104
Rusty Russell [Mon, 30 Jan 2012 05:29:16 +0000 (15:59 +1030)]
tdb2: add -1 and -2 options to tdbtorture
(For now, -1 is the default).
Rusty Russell [Mon, 30 Jan 2012 05:01:05 +0000 (15:31 +1030)]
tdb2:tdbtorture: use TEST_DATA_PREFIX for files
TDB2 version of commit
b83672b36c1ea8c35833c40c3919b63809f16624.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Sun, 29 Jan 2012 23:37:18 +0000 (10:07 +1030)]
tdb2: name tools the same as TDB1 tools.
Otherwise, when we switch everyone's scripts will break (including our
own tests!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Sun, 29 Jan 2012 23:37:17 +0000 (10:07 +1030)]
tdb2: tools/tdb2backup
Minor changes from tdb/tools/tdbbackup.c.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Sun, 29 Jan 2012 23:37:17 +0000 (10:07 +1030)]
samdb: use compat wrappers for tdb_fetch().
TDB2's tdb_fetch() returns an error code; use tdb_fetch_compat() for now.
Similarly, tdb_errorstr() -> tdb_errorstr_compat().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell [Sun, 29 Jan 2012 23:36:55 +0000 (10:06 +1030)]
tdb_compat: only use hashsize attribute when O_CREAT
tdb2 complains if you specify a tdb1 hashsize, and you're not actually
trying to create a new database.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>