git.samba.org - sfrench/cifs-2.6.git/log

netfilter: flowtable: incorrect pppoe tuple

pppoe traffic reaching ingress path does not match the flowtable entry
because the pppoe header is expected to be at the network header offset.
This bug causes a mismatch in the flow table lookup, so pppoe packets
enter the classical forwarding path.

Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: flowtable: validate pppoe header

Ensure there is sufficient room to access the protocol field of the
PPPoe header. Validate it once before the flowtable lookup, then use a
helper function to access protocol field.

Reported-by: syzbot+b6f07e1c07ef40199081@syzkaller.appspotmail.com
Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_set_pipapo: do not free live element

Pablo reports a crash with large batches of elements with a
back-to-back add/remove pattern.  Quoting Pablo:

  add_elem("00000000") timeout 100 ms
  ...
  add_elem("0000000X") timeout 100 ms
  del_elem("0000000X") <---------------- delete one that was just added
  ...
  add_elem("00005000") timeout 100 ms

  1) nft_pipapo_remove() removes element 0000000X
  Then, KASAN shows a splat.

Looking at the remove function there is a chance that we will drop a
rule that maps to a non-deactivated element.

Removal happens in two steps, first we do a lookup for key k and return the
to-be-removed element and mark it as inactive in the next generation.
Then, in a second step, the element gets removed from the set/map.

The _remove function does not work correctly if we have more than one
element that share the same key.

This can happen if we insert an element into a set when the set already
holds an element with same key, but the element mapping to the existing
key has timed out or is not active in the next generation.

In such case its possible that removal will unmap the wrong element.
If this happens, we will leak the non-deactivated element, it becomes
unreachable.

The element that got deactivated (and will be freed later) will
remain reachable in the set data structure, this can result in
a crash when such an element is retrieved during lookup (stale
pointer).

Add a check that the fully matching key does in fact map to the element
that we have marked as inactive in the deactivation step.
If not, we need to continue searching.

Add a bug/warn trap at the end of the function as well, the remove
function must not ever be called with an invisible/unreachable/non-existent
element.

v2: avoid uneeded temporary variable (Stefano)

Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_set_pipapo: walk over current view on netlink dump

The generation mask can be updated while netlink dump is in progress.
The pipapo set backend walk iterator cannot rely on it to infer what
view of the datastructure is to be used. Add notation to specify if user
wants to read/update the set.

Based on patch from Florian Westphal.

Fixes: 2b84e215f874 ("netfilter: nft_set_pipapo: .walk does not deal with generations")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: br_netfilter: skip conntrack input hook for promisc packets

For historical reasons, when bridge device is in promisc mode, packets
that are directed to the taps follow bridge input hook path. This patch
adds a workaround to reset conntrack for these packets.

Jianbo Liu reports warning splats in their test infrastructure where
cloned packets reach the br_netfilter input hook to confirm the
conntrack object.

Scratch one bit from BR_INPUT_SKB_CB to annotate that this packet has
reached the input hook because it is passed up to the bridge device to
reach the taps.

[   57.571874] WARNING: CPU: 1 PID: 0 at net/bridge/br_netfilter_hooks.c:616 br_nf_local_in+0x157/0x180 [br_netfilter]
[   57.572749] Modules linked in: xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_isc si ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5ctl mlx5_core
[   57.575158] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0+ #19
[   57.575700] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[   57.576662] RIP: 0010:br_nf_local_in+0x157/0x180 [br_netfilter]
[   57.577195] Code: fe ff ff 41 bd 04 00 00 00 be 04 00 00 00 e9 4a ff ff ff be 04 00 00 00 48 89 ef e8 f3 a9 3c e1 66 83 ad b4 00 00 00 04 eb 91 <0f> 0b e9 f1 fe ff ff 0f 0b e9 df fe ff ff 48 89 df e8 b3 53 47 e1
[   57.578722] RSP: 0018:ffff88885f845a08 EFLAGS: 00010202
[   57.579207] RAX: 0000000000000002 RBX: ffff88812dfe8000 RCX: 0000000000000000
[   57.579830] RDX: ffff88885f845a60 RSI: ffff8881022dc300 RDI: 0000000000000000
[   57.580454] RBP: ffff88885f845a60 R08: 0000000000000001 R09: 0000000000000003
[   57.581076] R10: 00000000ffff1300 R11: 0000000000000002 R12: 0000000000000000
[   57.581695] R13: ffff8881047ffe00 R14: ffff888108dbee00 R15: ffff88814519b800
[   57.582313] FS:  0000000000000000(0000) GS:ffff88885f840000(0000) knlGS:0000000000000000
[   57.583040] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   57.583564] CR2: 000000c4206aa000 CR3: 0000000103847001 CR4: 0000000000370eb0
[   57.584194] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[   57.584820] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[   57.585440] Call Trace:
[   57.585721]  <IRQ>
[   57.585976]  ? __warn+0x7d/0x130
[   57.586323]  ? br_nf_local_in+0x157/0x180 [br_netfilter]
[   57.586811]  ? report_bug+0xf1/0x1c0
[   57.587177]  ? handle_bug+0x3f/0x70
[   57.587539]  ? exc_invalid_op+0x13/0x60
[   57.587929]  ? asm_exc_invalid_op+0x16/0x20
[   57.588336]  ? br_nf_local_in+0x157/0x180 [br_netfilter]
[   57.588825]  nf_hook_slow+0x3d/0xd0
[   57.589188]  ? br_handle_vlan+0x4b/0x110
[   57.589579]  br_pass_frame_up+0xfc/0x150
[   57.589970]  ? br_port_flags_change+0x40/0x40
[   57.590396]  br_handle_frame_finish+0x346/0x5e0
[   57.590837]  ? ipt_do_table+0x32e/0x430
[   57.591221]  ? br_handle_local_finish+0x20/0x20
[   57.591656]  br_nf_hook_thresh+0x4b/0xf0 [br_netfilter]
[   57.592286]  ? br_handle_local_finish+0x20/0x20
[   57.592802]  br_nf_pre_routing_finish+0x178/0x480 [br_netfilter]
[   57.593348]  ? br_handle_local_finish+0x20/0x20
[   57.593782]  ? nf_nat_ipv4_pre_routing+0x25/0x60 [nf_nat]
[   57.594279]  br_nf_pre_routing+0x24c/0x550 [br_netfilter]
[   57.594780]  ? br_nf_hook_thresh+0xf0/0xf0 [br_netfilter]
[   57.595280]  br_handle_frame+0x1f3/0x3d0
[   57.595676]  ? br_handle_local_finish+0x20/0x20
[   57.596118]  ? br_handle_frame_finish+0x5e0/0x5e0
[   57.596566]  __netif_receive_skb_core+0x25b/0xfc0
[   57.597017]  ? __napi_build_skb+0x37/0x40
[   57.597418]  __netif_receive_skb_list_core+0xfb/0x220

Fixes: 62e7151ae3eb ("netfilter: bridge: confirm multicast packets before passing them up the stack")
Reported-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: Fix potential data-race in __nft_obj_type_get()

nft_unregister_obj() can concurrent with __nft_obj_type_get(),
and there is not any protection when iterate over nf_tables_objects
list in __nft_obj_type_get(). Therefore, there is potential data-race
of nf_tables_objects list entry.

Use list_for_each_entry_rcu() to iterate over nf_tables_objects
list in __nft_obj_type_get(), and use rcu_read_lock() in the caller
nft_obj_type_get() to protect the entire type query process.

Fixes: e50092404c1b ("netfilter: nf_tables: add stateful objects")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: Fix potential data-race in __nft_expr_type_get()

nft_unregister_expr() can concurrent with __nft_expr_type_get(),
and there is not any protection when iterate over nf_tables_expressions
list in __nft_expr_type_get(). Therefore, there is potential data-race
of nf_tables_expressions list entry.

Use list_for_each_entry_rcu() to iterate over nf_tables_expressions
list in __nft_expr_type_get(), and use rcu_read_lock() in the caller
nft_expr_type_get() to protect the entire type query process.

Fixes: ef1f7df9170d ("netfilter: nf_tables: expression ops overloading")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

r8169: fix LED-related deadlock on module removal

Binding devm_led_classdev_register() to the netdev is problematic
because on module removal we get a RTNL-related deadlock. Fix this
by avoiding the device-managed LED functions.

Note: We can safely call led_classdev_unregister() for a LED even
if registering it failed, because led_classdev_unregister() detects
this and is a no-op in this case.

Fixes: 18764b883e15 ("r8169: add support for LED's on RTL8168/RTL8101")
Cc: stable@vger.kernel.org
Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

pds_core: Fix pdsc_check_pci_health function to use work thread

When the driver notices fw_status == 0xff it tries to perform a PCI
reset on itself via pci_reset_function() in the context of the driver's
health thread. However, pdsc_reset_prepare calls
pdsc_stop_health_thread(), which attempts to stop/flush the health
thread. This results in a deadlock because the stop/flush will never
complete since the driver called pci_reset_function() from the health
thread context. Fix by changing the pdsc_check_pci_health_function()
to queue a newly introduced pdsc_pci_reset_thread() on the pdsc's
work queue.

Unloading the driver in the fw_down/dead state uncovered another issue,
which can be seen in the following trace:

WARNING: CPU: 51 PID: 6914 at kernel/workqueue.c:1450 __queue_work+0x358/0x440
[...]
RIP: 0010:__queue_work+0x358/0x440
[...]
Call Trace:
<TASK>
? __warn+0x85/0x140
? __queue_work+0x358/0x440
? report_bug+0xfc/0x1e0
? handle_bug+0x3f/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? __queue_work+0x358/0x440
queue_work_on+0x28/0x30
pdsc_devcmd_locked+0x96/0xe0 [pds_core]
pdsc_devcmd_reset+0x71/0xb0 [pds_core]
pdsc_teardown+0x51/0xe0 [pds_core]
pdsc_remove+0x106/0x200 [pds_core]
pci_device_remove+0x37/0xc0
device_release_driver_internal+0xae/0x140
driver_detach+0x48/0x90
bus_remove_driver+0x6d/0xf0
pci_unregister_driver+0x2e/0xa0
pdsc_cleanup_module+0x10/0x780 [pds_core]
__x64_sys_delete_module+0x142/0x2b0
? syscall_trace_enter.isra.18+0x126/0x1a0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fbd9d03a14b
[...]

Fix this by preventing the devcmd reset if the FW is not running.

Fixes: d9407ff11809 ("pds_core: Prevent health thread from running during reset/remove")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr

Although ipv6_get_ifaddr walks inet6_addr_lst under the RCU lock, it
still means hlist_for_each_entry_rcu can return an item that got removed
from the list. The memory itself of such item is not freed thanks to RCU
but nothing guarantees the actual content of the memory is sane.

In particular, the reference count can be zero. This can happen if
ipv6_del_addr is called in parallel. ipv6_del_addr removes the entry
from inet6_addr_lst (hlist_del_init_rcu(&ifp->addr_lst)) and drops all
references (__in6_ifa_put(ifp) + in6_ifa_put(ifp)). With bad enough
timing, this can happen:

1. In ipv6_get_ifaddr, hlist_for_each_entry_rcu returns an entry.

2. Then, the whole ipv6_del_addr is executed for the given entry. The
   reference count drops to zero and kfree_rcu is scheduled.

3. ipv6_get_ifaddr continues and tries to increments the reference count
   (in6_ifa_hold).

4. The rcu is unlocked and the entry is freed.

5. The freed entry is returned.

Prevent increasing of the reference count in such case. The name
in6_ifa_hold_safe is chosen to mimic the existing fib6_info_hold_safe.

[   41.506330] refcount_t: addition on 0; use-after-free.
[   41.506760] WARNING: CPU: 0 PID: 595 at lib/refcount.c:25 refcount_warn_saturate+0xa5/0x130
[   41.507413] Modules linked in: veth bridge stp llc
[   41.507821] CPU: 0 PID: 595 Comm: python3 Not tainted 6.9.0-rc2.main-00208-g49563be82afa #14
[   41.508479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
[   41.509163] RIP: 0010:refcount_warn_saturate+0xa5/0x130
[   41.509586] Code: ad ff 90 0f 0b 90 90 c3 cc cc cc cc 80 3d c0 30 ad 01 00 75 a0 c6 05 b7 30 ad 01 01 90 48 c7 c7 38 cc 7a 8c e8 cc 18 ad ff 90 <0f> 0b 90 90 c3 cc cc cc cc 80 3d 98 30 ad 01 00 0f 85 75 ff ff ff
[   41.510956] RSP: 0018:ffffbda3c026baf0 EFLAGS: 00010282
[   41.511368] RAX: 0000000000000000 RBX: ffff9e9c46914800 RCX: 0000000000000000
[   41.511910] RDX: ffff9e9c7ec29c00 RSI: ffff9e9c7ec1c900 RDI: ffff9e9c7ec1c900
[   41.512445] RBP: ffff9e9c43660c9c R08: 0000000000009ffb R09: 00000000ffffdfff
[   41.512998] R10: 00000000ffffdfff R11: ffffffff8ca58a40 R12: ffff9e9c4339a000
[   41.513534] R13: 0000000000000001 R14: ffff9e9c438a0000 R15: ffffbda3c026bb48
[   41.514086] FS:  00007fbc4cda1740(0000) GS:ffff9e9c7ec00000(0000) knlGS:0000000000000000
[   41.514726] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   41.515176] CR2: 000056233b337d88 CR3: 000000000376e006 CR4: 0000000000370ef0
[   41.515713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   41.516252] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   41.516799] Call Trace:
[   41.517037]  <TASK>
[   41.517249]  ? __warn+0x7b/0x120
[   41.517535]  ? refcount_warn_saturate+0xa5/0x130
[   41.517923]  ? report_bug+0x164/0x190
[   41.518240]  ? handle_bug+0x3d/0x70
[   41.518541]  ? exc_invalid_op+0x17/0x70
[   41.520972]  ? asm_exc_invalid_op+0x1a/0x20
[   41.521325]  ? refcount_warn_saturate+0xa5/0x130
[   41.521708]  ipv6_get_ifaddr+0xda/0xe0
[   41.522035]  inet6_rtm_getaddr+0x342/0x3f0
[   41.522376]  ? __pfx_inet6_rtm_getaddr+0x10/0x10
[   41.522758]  rtnetlink_rcv_msg+0x334/0x3d0
[   41.523102]  ? netlink_unicast+0x30f/0x390
[   41.523445]  ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[   41.523832]  netlink_rcv_skb+0x53/0x100
[   41.524157]  netlink_unicast+0x23b/0x390
[   41.524484]  netlink_sendmsg+0x1f2/0x440
[   41.524826]  __sys_sendto+0x1d8/0x1f0
[   41.525145]  __x64_sys_sendto+0x1f/0x30
[   41.525467]  do_syscall_64+0xa5/0x1b0
[   41.525794]  entry_SYSCALL_64_after_hwframe+0x72/0x7a
[   41.526213] RIP: 0033:0x7fbc4cfcea9a
[   41.526528] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
[   41.527942] RSP: 002b:00007ffcf54012a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[   41.528593] RAX: ffffffffffffffda RBX: 00007ffcf5401368 RCX: 00007fbc4cfcea9a
[   41.529173] RDX: 000000000000002c RSI: 00007fbc4b9d9bd0 RDI: 0000000000000005
[   41.529786] RBP: 00007fbc4bafb040 R08: 00007ffcf54013e0 R09: 000000000000000c
[   41.530375] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[   41.530977] R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007fbc4ca85d1b
[   41.531573]  </TASK>

Fixes: 5c578aedcb21d ("IPv6: convert addrconf hash list to RCU")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Link: https://lore.kernel.org/r/8ab821e36073a4a406c50ec83c9e8dc586c539e4.1712585809.git.jbenc@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-start-to-replace-copy_from_sockptr'

Eric Dumazet says:

====================
net: start to replace copy_from_sockptr()

We got several syzbot reports about unsafe copy_from_sockptr()
calls. After fixing some of them, it appears that we could
use a new helper to factorize all the checks in one place.

This series targets net tree, we can later start converting
many call sites in net-next.
====================

Link: https://lore.kernel.org/r/20240408082845.3957374-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: llcp: fix nfc_llcp_setsockopt() unsafe copies

syzbot reported unsafe calls to copy_from_sockptr() [1]

Use copy_safe_from_sockptr() instead.

[1]

BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in nfc_llcp_setsockopt+0x6c2/0x850 net/nfc/llcp_sock.c:255
Read of size 4 at addr ffff88801caa1ec3 by task syz-executor459/5078

CPU: 0 PID: 5078 Comm: syz-executor459 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call Trace:
<TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
  print_address_description mm/kasan/report.c:377 [inline]
  print_report+0x169/0x550 mm/kasan/report.c:488
  kasan_report+0x143/0x180 mm/kasan/report.c:601
  copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
  copy_from_sockptr include/linux/sockptr.h:55 [inline]
  nfc_llcp_setsockopt+0x6c2/0x850 net/nfc/llcp_sock.c:255
  do_sock_setsockopt+0x3b1/0x720 net/socket.c:2311
  __sys_setsockopt+0x1ae/0x250 net/socket.c:2334
  __do_sys_setsockopt net/socket.c:2343 [inline]
  __se_sys_setsockopt net/socket.c:2340 [inline]
  __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340
do_syscall_64+0xfd/0x240
entry_SYSCALL_64_after_hwframe+0x6d/0x75
RIP: 0033:0x7f7fac07fd89
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff660eb788 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f7fac07fd89
RDX: 0000000000000000 RSI: 0000000000000118 RDI: 0000000000000004
RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000
R10: 0000000020000a80 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240408082845.3957374-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mISDN: fix MISDN_TIME_STAMP handling

syzbot reports one unsafe call to copy_from_sockptr() [1]

Use copy_safe_from_sockptr() instead.

[1]

BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in data_sock_setsockopt+0x46c/0x4cc drivers/isdn/mISDN/socket.c:417
Read of size 4 at addr ffff0000c6d54083 by task syz-executor406/6167

CPU: 1 PID: 6167 Comm: syz-executor406 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call trace:
  dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291
  show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106
  print_address_description mm/kasan/report.c:377 [inline]
  print_report+0x178/0x518 mm/kasan/report.c:488
  kasan_report+0xd8/0x138 mm/kasan/report.c:601
  __asan_report_load_n_noabort+0x1c/0x28 mm/kasan/report_generic.c:391
  copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
  copy_from_sockptr include/linux/sockptr.h:55 [inline]
  data_sock_setsockopt+0x46c/0x4cc drivers/isdn/mISDN/socket.c:417
  do_sock_setsockopt+0x2a0/0x4e0 net/socket.c:2311
  __sys_setsockopt+0x128/0x1a8 net/socket.c:2334
  __do_sys_setsockopt net/socket.c:2343 [inline]
  __se_sys_setsockopt net/socket.c:2340 [inline]
  __arm64_sys_setsockopt+0xb8/0xd4 net/socket.c:2340
  __invoke_syscall arch/arm64/kernel/syscall.c:34 [inline]
  invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:48
  el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:133
  do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:152
  el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712
  el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
  el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598

Fixes: 1b2b03f8e514 ("Add mISDN core files")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Link: https://lore.kernel.org/r/20240408082845.3957374-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: add copy_safe_from_sockptr() helper

copy_from_sockptr() helper is unsafe, unless callers
did the prior check against user provided optlen.

Too many callers get this wrong, lets add a helper to
fix them and avoid future copy/paste bugs.

Instead of :

   if (optlen < sizeof(opt)) {
       err = -EINVAL;
       break;
   }
   if (copy_from_sockptr(&opt, optval, sizeof(opt)) {
       err = -EFAULT;
       break;
   }

Use :

   err = copy_safe_from_sockptr(&opt, sizeof(opt),
                                optval, optlen);
   if (err)
       break;

Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240408082845.3957374-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv4/route: avoid unused-but-set-variable warning

The log_martians variable is only used in an #ifdef, causing a 'make W=1'
warning with gcc:

net/ipv4/route.c: In function 'ip_rt_send_redirect':
net/ipv4/route.c:880:13: error: variable 'log_martians' set but not used [-Werror=unused-but-set-variable]

Change the #ifdef to an equivalent IS_ENABLED() to let the compiler
see where the variable is used.

Fixes: 30038fc61adf ("net: ip_rt_send_redirect() optimization")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240408074219.3030256-2-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ipv6: fib: hide unused 'pn' variable

When CONFIG_IPV6_SUBTREES is disabled, the only user is hidden, causing
a 'make W=1' warning:

net/ipv6/ip6_fib.c: In function 'fib6_add':
net/ipv6/ip6_fib.c:1388:32: error: variable 'pn' set but not used [-Werror=unused-but-set-variable]

Add another #ifdef around the variable declaration, matching the other
uses in this file.

Fixes: 66729e18df08 ("[IPV6] ROUTE: Make sure we have fn->leaf when adding a node on subtree.")
Link: https://lore.kernel.org/netdev/20240322131746.904943-1-arnd@kernel.org/
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240408074219.3030256-1-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

octeontx2-af: Fix NIX SQ mode and BP config

NIX SQ mode and link backpressure configuration is required for
all platforms. But in current driver this code is wrongly placed
under specific platform check. This patch fixes the issue by
moving the code out of platform check.

Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://lore.kernel.org/r/20240408063643.26288-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

af_unix: Clear stale u->oob_skb.

syzkaller started to report deadlock of unix_gc_lock after commit
4090fa373f0e ("af_unix: Replace garbage collection algorithm."), but
it just uncovers the bug that has been there since commit 314001f0bf92
("af_unix: Add OOB support").

The repro basically does the following.

  from socket import *
  from array import array

  c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
  c1.sendmsg([b'a'], [(SOL_SOCKET, SCM_RIGHTS, array("i", [c2.fileno()]))], MSG_OOB)
  c2.recv(1)  # blocked as no normal data in recv queue

  c2.close()  # done async and unblock recv()
  c1.close()  # done async and trigger GC

A socket sends its file descriptor to itself as OOB data and tries to
receive normal data, but finally recv() fails due to async close().

The problem here is wrong handling of OOB skb in manage_oob().  When
recvmsg() is called without MSG_OOB, manage_oob() is called to check
if the peeked skb is OOB skb.  In such a case, manage_oob() pops it
out of the receive queue but does not clear unix_sock(sk)->oob_skb.
This is wrong in terms of uAPI.

Let's say we send "hello" with MSG_OOB, and "world" without MSG_OOB.
The 'o' is handled as OOB data.  When recv() is called twice without
MSG_OOB, the OOB data should be lost.

  >>> from socket import *
  >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM, 0)
  >>> c1.send(b'hello', MSG_OOB)  # 'o' is OOB data
  5
  >>> c1.send(b'world')
  5
  >>> c2.recv(5)  # OOB data is not received
  b'hell'
  >>> c2.recv(5)  # OOB date is skipped
  b'world'
  >>> c2.recv(5, MSG_OOB)  # This should return an error
  b'o'

In the same situation, TCP actually returns -EINVAL for the last
recv().

Also, if we do not clear unix_sk(sk)->oob_skb, unix_poll() always set
EPOLLPRI even though the data has passed through by previous recv().

To avoid these issues, we must clear unix_sk(sk)->oob_skb when dequeuing
it from recv queue.

The reason why the old GC did not trigger the deadlock is because the
old GC relied on the receive queue to detect the loop.

When it is triggered, the socket with OOB data is marked as GC candidate
because file refcount == inflight count (1).  However, after traversing
all inflight sockets, the socket still has a positive inflight count (1),
thus the socket is excluded from candidates.  Then, the old GC lose the
chance to garbage-collect the socket.

With the old GC, the repro continues to create true garbage that will
never be freed nor detected by kmemleak as it's linked to the global
inflight list.  That's why we couldn't even notice the issue.

Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Reported-by: syzbot+7f7f201cc2668a8fd169@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7f7f201cc2668a8fd169
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240405221057.2406-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ks8851: Handle softirqs at the end of IRQ thread to fix hang

The ks8851_irq() thread may call ks8851_rx_pkts() in case there are
any packets in the MAC FIFO, which calls netif_rx(). This netif_rx()
implementation is guarded by local_bh_disable() and local_bh_enable().
The local_bh_enable() may call do_softirq() to run softirqs in case
any are pending. One of the softirqs is net_rx_action, which ultimately
reaches the driver .start_xmit callback. If that happens, the system
hangs. The entire call chain is below:

ks8851_start_xmit_par from netdev_start_xmit
netdev_start_xmit from dev_hard_start_xmit
dev_hard_start_xmit from sch_direct_xmit
sch_direct_xmit from __dev_queue_xmit
__dev_queue_xmit from __neigh_update
__neigh_update from neigh_update
neigh_update from arp_process.constprop.0
arp_process.constprop.0 from __netif_receive_skb_one_core
__netif_receive_skb_one_core from process_backlog
process_backlog from __napi_poll.constprop.0
__napi_poll.constprop.0 from net_rx_action
net_rx_action from __do_softirq
__do_softirq from call_with_stack
call_with_stack from do_softirq
do_softirq from __local_bh_enable_ip
__local_bh_enable_ip from netif_rx
netif_rx from ks8851_irq
ks8851_irq from irq_thread_fn
irq_thread_fn from irq_thread
irq_thread from kthread
kthread from ret_from_fork

The hang happens because ks8851_irq() first locks a spinlock in
ks8851_par.c ks8851_lock_par() spin_lock_irqsave(&ksp->lock, ...)
and with that spinlock locked, calls netif_rx(). Once the execution
reaches ks8851_start_xmit_par(), it calls ks8851_lock_par() again
which attempts to claim the already locked spinlock again, and the
hang happens.

Move the do_softirq() call outside of the spinlock protected section
of ks8851_irq() by disabling BHs around the entire spinlock protected
section of ks8851_irq() handler. Place local_bh_enable() outside of
the spinlock protected section, so that it can trigger do_softirq()
without the ks8851_par.c ks8851_lock_par() spinlock being held, and
safely call ks8851_start_xmit_par() without attempting to lock the
already locked spinlock.

Since ks8851_irq() is protected by local_bh_disable()/local_bh_enable()
now, replace netif_rx() with __netif_rx() which is not duplicating the
local_bh_disable()/local_bh_enable() calls.

Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20240405203204.82062-2-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ks8851: Inline ks8851_rx_skb()

Both ks8851_rx_skb_par() and ks8851_rx_skb_spi() call netif_rx(skb),
inline the netif_rx(skb) call directly into ks8851_common.c and drop
the .rx_skb callback and ks8851_rx_skb() wrapper. This removes one
indirect call from the driver, no functional change otherwise.

Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20240405203204.82062-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'stmmac-missing-stats-DW-GMAC'

Minda Chen says:

====================
Add missing mmc statistics in DW GMAC

Add miss MMC statistic in DW GMAC

base on 6.9-rc1

changed
v2:
patch2 : remove mmc_rx_control_g due to it is gotten in
ethtool_ops::get_eth_ctrl_stats.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: mmc_core: Add GMAC mmc tx/rx missing statistics

The missing statistics including Rx_Receive_Error_Packets and
Tx_OSize_Packets_Good.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: mmc_core: Add GMAC LPI statistics

XGMAC MMC has already added LPI statistics. GMAC MMC lack of these
statistics. Add register definition and reading the LPI statistics
from registers.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'bnxt_en-fixes'

Michael Chan says:

====================
bnxt_en: Bug fixes

The first 2 patches fix 2 potential issues in the aux bus initialization
and error recovery paths. The 3rd patch fixes a potential PTP TX
timestamp issue during error recovery.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Reset PTP tx_avail after possible firmware reset

It is possible that during error recovery and firmware reset,
there is a pending TX PTP packet waiting for the timestamp.
We need to reset this condition so that after recovery, the
tx_avail count for PTP is reset back to the initial value.
Otherwise, we may not accept any PTP TX timestamps after
recovery.

Fixes: 118612d519d8 ("bnxt_en: Add PTP clock APIs, ioctls, and ethtool methods")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix error recovery for RoCE ulp client

Since runtime MSIXs vector allocation/free has been removed,
the L2 driver needs to repopulate the MSIX entries for the
ulp client as the irq table may change during the recovery
process.

Fixes: 303432211324 ("bnxt_en: Remove runtime interrupt vector allocation")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix possible memory leak in bnxt_rdma_aux_device_init()

If ulp = kzalloc() fails, the allocated edev will leak because it is
not properly assigned and the cleanup path will not be able to free it.
Fix it by assigning it properly immediately after allocation.

Fixes: 303432211324 ("bnxt_en: Remove runtime interrupt vector allocation")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390/ism: fix receive message buffer allocation

Since [1], dma_alloc_coherent() does not accept requests for GFP_COMP
anymore, even on archs that may be able to fulfill this. Functionality that
relied on the receive buffer being a compound page broke at that point:
The SMC-D protocol, that utilizes the ism device driver, passes receive
buffers to the splice processor in a struct splice_pipe_desc with a
single entry list of struct pages. As the buffer is no longer a compound
page, the splice processor now rejects requests to handle more than a
page worth of data.

Replace dma_alloc_coherent() and allocate a buffer with folio_alloc and
create a DMA map for it with dma_map_page(). Since only receive buffers
on ISM devices use DMA, qualify the mapping as FROM_DEVICE.
Since ISM devices are available on arch s390, only and on that arch all
DMA is coherent, there is no need to introduce and export some kind of
dma_sync_to_cpu() method to be called by the SMC-D protocol layer.

Analogously, replace dma_free_coherent by a two step dma_unmap_page,
then folio_put to free the receive buffer.

[1] https://lore.kernel.org/all/20221113163535.884299-1-hch@lst.de/

Fixes: c08004eede4b ("s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent")
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

geneve: fix header validation in geneve[6]_xmit_skb

syzbot is able to trigger an uninit-value in geneve_xmit() [1]

Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield())
uses skb_protocol(skb, true), pskb_inet_may_pull() is only using
skb->protocol.

If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb->protocol,
pskb_inet_may_pull() does nothing at all.

If a vlan tag was provided by the caller (af_packet in the syzbot case),
the network header might not point to the correct location, and skb
linear part could be smaller than expected.

Add skb_vlan_inet_prepare() to perform a complete mac validation.

Use this in geneve for the moment, I suspect we need to adopt this
more broadly.

v4 - Jakub reported v3 broke l2_tos_ttl_inherit.sh selftest
   - Only call __vlan_get_protocol() for vlan types.
Link: https://lore.kernel.org/netdev/20240404100035.3270a7d5@kernel.org/
v2,v3 - Addressed Sabrina comments on v1 and v2
Link: https://lore.kernel.org/netdev/Zg1l9L2BNoZWZDZG@hog/
[1]

BUG: KMSAN: uninit-value in geneve_xmit_skb drivers/net/geneve.c:910 [inline]
BUG: KMSAN: uninit-value in geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
  geneve_xmit_skb drivers/net/geneve.c:910 [inline]
  geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
  __netdev_start_xmit include/linux/netdevice.h:4903 [inline]
  netdev_start_xmit include/linux/netdevice.h:4917 [inline]
  xmit_one net/core/dev.c:3531 [inline]
  dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547
  __dev_queue_xmit+0x348d/0x52c0 net/core/dev.c:4335
  dev_queue_xmit include/linux/netdevice.h:3091 [inline]
  packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276
  packet_snd net/packet/af_packet.c:3081 [inline]
  packet_sendmsg+0x8bb0/0x9ef0 net/packet/af_packet.c:3113
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  __sys_sendto+0x685/0x830 net/socket.c:2191
  __do_sys_sendto net/socket.c:2203 [inline]
  __se_sys_sendto net/socket.c:2199 [inline]
  __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75

Uninit was created at:
  slab_post_alloc_hook mm/slub.c:3804 [inline]
  slab_alloc_node mm/slub.c:3845 [inline]
  kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888
  kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577
  __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668
  alloc_skb include/linux/skbuff.h:1318 [inline]
  alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504
  sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795
  packet_alloc_skb net/packet/af_packet.c:2930 [inline]
  packet_snd net/packet/af_packet.c:3024 [inline]
  packet_sendmsg+0x722d/0x9ef0 net/packet/af_packet.c:3113
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  __sys_sendto+0x685/0x830 net/socket.c:2191
  __do_sys_sendto net/socket.c:2203 [inline]
  __se_sys_sendto net/socket.c:2199 [inline]
  __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75

CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87efa423 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024

Fixes: d13f048dd40e ("net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb")
Reported-by: syzbot+9ee20ec1de7b3168db09@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/000000000000d19c3a06152f9ee4@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: Drop Li Yang as their email address stopped working

When sending a patch to (among others) Li Yang the nxp MTA replied that
the address doesn't exist and so the mail couldn't be delivered. The
error code was 550, so at least technically that's not a temporal issue.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'batadv-net-pullrequest-20240405' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
Here is a batman-adv bugfix:

- void infinite loop trying to resize local TT, by Sven Eckelmann
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

lib: checksum: hide unused expected_csum_ipv6_magic[]

When CONFIG_NET is disabled, an extra warning shows up for this
unused variable:

lib/checksum_kunit.c:218:18: error: 'expected_csum_ipv6_magic' defined but not used [-Werror=unused-const-variable=]

Replace the #ifdef with an IS_ENABLED() check that makes the compiler's
dead-code-elimination take care of the link failure.

Fixes: f24a70106dc1 ("lib: checksum: Fix build with CONFIG_NET=n")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-pf: Fix transmit scheduler resource leak

Inorder to support shaping and scheduling, Upon class creation
Netdev driver allocates trasmit schedulers.

The previous patch which added support for Round robin scheduling has
a bug due to which driver is not freeing transmit schedulers post
class deletion.

This patch fixes the same.

Fixes: 47a9656f168a ("octeontx2-pf: htb offload support for Round Robin scheduling")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtio_net: Do not send RSS key if it is not supported

There is a bug when setting the RSS options in virtio_net that can break
the whole machine, getting the kernel into an infinite loop.

Running the following command in any QEMU virtual machine with virtionet
will reproduce this problem:

    # ethtool -X eth0  hfunc toeplitz

This is how the problem happens:

1) ethtool_set_rxfh() calls virtnet_set_rxfh()

2) virtnet_set_rxfh() calls virtnet_commit_rss_command()

3) virtnet_commit_rss_command() populates 4 entries for the rss
scatter-gather

4) Since the command above does not have a key, then the last
scatter-gatter entry will be zeroed, since rss_key_size == 0.
sg_buf_size = vi->rss_key_size;

5) This buffer is passed to qemu, but qemu is not happy with a buffer
with zero length, and do the following in virtqueue_map_desc() (QEMU
function):

  if (!sz) {
      virtio_error(vdev, "virtio: zero sized buffers are not allowed");

6) virtio_error() (also QEMU function) set the device as broken

    vdev->broken = true;

7) Qemu bails out, and do not repond this crazy kernel.

8) The kernel is waiting for the response to come back (function
virtnet_send_command())

9) The kernel is waiting doing the following :

      while (!virtqueue_get_buf(vi->cvq, &tmp) &&
     !virtqueue_is_broken(vi->cvq))
      cpu_relax();

10) None of the following functions above is true, thus, the kernel
loops here forever. Keeping in mind that virtqueue_is_broken() does
not look at the qemu `vdev->broken`, so, it never realizes that the
vitio is broken at QEMU side.

Fix it by not sending RSS commands if the feature is not available in
the device.

Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.")
Cc: stable@vger.kernel.org
Cc: qemu-devel@nongnu.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING

syzbot reported an illegal copy in xsk_setsockopt() [1]

Make sure to validate setsockopt() @optlen parameter.

[1]

BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in xsk_setsockopt+0x909/0xa40 net/xdp/xsk.c:1420
Read of size 4 at addr ffff888028c6cde3 by task syz-executor.0/7549

CPU: 0 PID: 7549 Comm: syz-executor.0 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call Trace:
<TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
  print_address_description mm/kasan/report.c:377 [inline]
  print_report+0x169/0x550 mm/kasan/report.c:488
  kasan_report+0x143/0x180 mm/kasan/report.c:601
  copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
  copy_from_sockptr include/linux/sockptr.h:55 [inline]
  xsk_setsockopt+0x909/0xa40 net/xdp/xsk.c:1420
  do_sock_setsockopt+0x3af/0x720 net/socket.c:2311
  __sys_setsockopt+0x1ae/0x250 net/socket.c:2334
  __do_sys_setsockopt net/socket.c:2343 [inline]
  __se_sys_setsockopt net/socket.c:2340 [inline]
  __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340
do_syscall_64+0xfb/0x240
entry_SYSCALL_64_after_hwframe+0x6d/0x75
RIP: 0033:0x7fb40587de69
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fb40665a0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 00007fb4059abf80 RCX: 00007fb40587de69
RDX: 0000000000000005 RSI: 000000000000011b RDI: 0000000000000006
RBP: 00007fb4058ca47a R08: 0000000000000002 R09: 0000000000000000
R10: 0000000020001980 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007fb4059abf80 R15: 00007fff57ee4d08
</TASK>

Allocated by task 7549:
  kasan_save_stack mm/kasan/common.c:47 [inline]
  kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
  poison_kmalloc_redzone mm/kasan/common.c:370 [inline]
  __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387
  kasan_kmalloc include/linux/kasan.h:211 [inline]
  __do_kmalloc_node mm/slub.c:3966 [inline]
  __kmalloc+0x233/0x4a0 mm/slub.c:3979
  kmalloc include/linux/slab.h:632 [inline]
  __cgroup_bpf_run_filter_setsockopt+0xd2f/0x1040 kernel/bpf/cgroup.c:1869
  do_sock_setsockopt+0x6b4/0x720 net/socket.c:2293
  __sys_setsockopt+0x1ae/0x250 net/socket.c:2334
  __do_sys_setsockopt net/socket.c:2343 [inline]
  __se_sys_setsockopt net/socket.c:2340 [inline]
  __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340
do_syscall_64+0xfb/0x240
entry_SYSCALL_64_after_hwframe+0x6d/0x75

The buggy address belongs to the object at ffff888028c6cde0
which belongs to the cache kmalloc-8 of size 8
The buggy address is located 1 bytes to the right of
allocated 2-byte region [ffff888028c6cde0, ffff888028c6cde2)

The buggy address belongs to the physical page:
page:ffffea0000a31b00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888028c6c9c0 pfn:0x28c6c
anon flags: 0xfff00000000800(slab|node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xffffffff()
raw: 00fff00000000800 ffff888014c41280 0000000000000000 dead000000000001
raw: ffff888028c6c9c0 0000000080800057 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112cc0(GFP_USER|__GFP_NOWARN|__GFP_NORETRY), pid 6648, tgid 6644 (syz-executor.0), ts 133906047828, free_ts 133859922223
  set_page_owner include/linux/page_owner.h:31 [inline]
  post_alloc_hook+0x1ea/0x210 mm/page_alloc.c:1533
  prep_new_page mm/page_alloc.c:1540 [inline]
  get_page_from_freelist+0x33ea/0x3580 mm/page_alloc.c:3311
  __alloc_pages+0x256/0x680 mm/page_alloc.c:4569
  __alloc_pages_node include/linux/gfp.h:238 [inline]
  alloc_pages_node include/linux/gfp.h:261 [inline]
  alloc_slab_page+0x5f/0x160 mm/slub.c:2175
  allocate_slab mm/slub.c:2338 [inline]
  new_slab+0x84/0x2f0 mm/slub.c:2391
  ___slab_alloc+0xc73/0x1260 mm/slub.c:3525
  __slab_alloc mm/slub.c:3610 [inline]
  __slab_alloc_node mm/slub.c:3663 [inline]
  slab_alloc_node mm/slub.c:3835 [inline]
  __do_kmalloc_node mm/slub.c:3965 [inline]
  __kmalloc_node+0x2db/0x4e0 mm/slub.c:3973
  kmalloc_node include/linux/slab.h:648 [inline]
  __vmalloc_area_node mm/vmalloc.c:3197 [inline]
  __vmalloc_node_range+0x5f9/0x14a0 mm/vmalloc.c:3392
  __vmalloc_node mm/vmalloc.c:3457 [inline]
  vzalloc+0x79/0x90 mm/vmalloc.c:3530
  bpf_check+0x260/0x19010 kernel/bpf/verifier.c:21162
  bpf_prog_load+0x1667/0x20f0 kernel/bpf/syscall.c:2895
  __sys_bpf+0x4ee/0x810 kernel/bpf/syscall.c:5631
  __do_sys_bpf kernel/bpf/syscall.c:5738 [inline]
  __se_sys_bpf kernel/bpf/syscall.c:5736 [inline]
  __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5736
do_syscall_64+0xfb/0x240
entry_SYSCALL_64_after_hwframe+0x6d/0x75
page last free pid 6650 tgid 6647 stack trace:
  reset_page_owner include/linux/page_owner.h:24 [inline]
  free_pages_prepare mm/page_alloc.c:1140 [inline]
  free_unref_page_prepare+0x95d/0xa80 mm/page_alloc.c:2346
  free_unref_page_list+0x5a3/0x850 mm/page_alloc.c:2532
  release_pages+0x2117/0x2400 mm/swap.c:1042
  tlb_batch_pages_flush mm/mmu_gather.c:98 [inline]
  tlb_flush_mmu_free mm/mmu_gather.c:293 [inline]
  tlb_flush_mmu+0x34d/0x4e0 mm/mmu_gather.c:300
  tlb_finish_mmu+0xd4/0x200 mm/mmu_gather.c:392
  exit_mmap+0x4b6/0xd40 mm/mmap.c:3300
  __mmput+0x115/0x3c0 kernel/fork.c:1345
  exit_mm+0x220/0x310 kernel/exit.c:569
  do_exit+0x99e/0x27e0 kernel/exit.c:865
  do_group_exit+0x207/0x2c0 kernel/exit.c:1027
  get_signal+0x176e/0x1850 kernel/signal.c:2907
  arch_do_signal_or_restart+0x96/0x860 arch/x86/kernel/signal.c:310
  exit_to_user_mode_loop kernel/entry/common.c:105 [inline]
  exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
  __syscall_exit_to_user_mode_work kernel/entry/common.c:201 [inline]
  syscall_exit_to_user_mode+0xc9/0x360 kernel/entry/common.c:212
  do_syscall_64+0x10a/0x240 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x6d/0x75

Memory state around the buggy address:
ffff888028c6cc80: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
ffff888028c6cd00: fa fc fc fc fa fc fc fc 00 fc fc fc 06 fc fc fc
>ffff888028c6cd80: fa fc fc fc fa fc fc fc fa fc fc fc 02 fc fc fc
                                                       ^
ffff888028c6ce00: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
ffff888028c6ce80: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc

Fixes: 423f38329d26 ("xsk: add umem fill queue support and mmap")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: "Björn Töpel" <bjorn@kernel.org>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240404202738.3634547-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

u64_stats: fix u64_stats_init() for lockdep when used repeatedly in one file

Fix bogus lockdep warnings if multiple u64_stats_sync variables are
initialized in the same file.

With CONFIG_LOCKDEP, seqcount_init() is a macro which declares:

static struct lock_class_key __key;

Since u64_stats_init() is a function (albeit an inline one), all calls
within the same file end up using the same instance, effectively treating
them all as a single lock-class.

Fixes: 9464ca650008 ("net: make u64_stats_init() a function")
Closes: https://lore.kernel.org/netdev/ea1567d9-ce66-45e6-8168-ac40a47d1821@roeck-us.net/
Signed-off-by: Petr Tesarik <petr@tesarici.cz>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240404075740.30682-1-petr@tesarici.cz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: openvswitch: fix unwanted error log on timeout policy probing

On startup, ovs-vswitchd probes different datapath features including
support for timeout policies.  While probing, it tries to execute
certain operations with OVS_PACKET_ATTR_PROBE or OVS_FLOW_ATTR_PROBE
attributes set.  These attributes tell the openvswitch module to not
log any errors when they occur as it is expected that some of the
probes will fail.

For some reason, setting the timeout policy ignores the PROBE attribute
and logs a failure anyway.  This is causing the following kernel log
on each re-start of ovs-vswitchd:

  kernel: Failed to associated timeout policy `ovs_test_tp'

Fix that by using the same logging macro that all other messages are
using.  The message will still be printed at info level when needed
and will be rate limited, but with a net rate limiter instead of
generic printk one.

The nf_ct_set_timeout() itself will still print some info messages,
but at least this change makes logging in openvswitch module more
consistent.

Fixes: 06bd2bdf19d2 ("openvswitch: Add timeout support to ct action")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20240403203803.2137962-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-6.9-rc3' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bluetooth and bpf.

  Fairly usual collection of driver and core fixes. The large selftest
  accompanying one of the fixes is also becoming a common occurrence.

  Current release - regressions:

   - ipv6: fix infinite recursion in fib6_dump_done()

   - net/rds: fix possible null-deref in newly added error path

  Current release - new code bugs:

   - net: do not consume a full cacheline for system_page_pool

   - bpf: fix bpf_arena-related file descriptor leaks in the verifier

   - drv: ice: fix freeing uninitialized pointers, fixing misuse of the
     newfangled __free() auto-cleanup

  Previous releases - regressions:

   - x86/bpf: fixes the BPF JIT with retbleed=stuff

   - xen-netfront: add missing skb_mark_for_recycle, fix page pool
     accounting leaks, revealed by recently added explicit warning

   - tcp: fix bind() regression for v6-only wildcard and v4-mapped-v6
     non-wildcard addresses

   - Bluetooth:
      - replace "hci_qca: Set BDA quirk bit if fwnode exists in DT" with
        better workarounds to un-break some buggy Qualcomm devices
      - set conn encrypted before conn establishes, fix re-connecting to
        some headsets which use slightly unusual sequence of msgs

   - mptcp:
      - prevent BPF accessing lowat from a subflow socket
      - don't account accept() of non-MPC client as fallback to TCP

   - drv: mana: fix Rx DMA datasize and skb_over_panic

   - drv: i40e: fix VF MAC filter removal

  Previous releases - always broken:

   - gro: various fixes related to UDP tunnels - netns crossing
     problems, incorrect checksum conversions, and incorrect packet
     transformations which may lead to panics

   - bpf: support deferring bpf_link dealloc to after RCU grace period

   - nf_tables:
      - release batch on table validation from abort path
      - release mutex after nft_gc_seq_end from abort path
      - flush pending destroy work before exit_net release

   - drv: r8169: skip DASH fw status checks when DASH is disabled"

* tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
  netfilter: validate user input for expected length
  net/sched: act_skbmod: prevent kernel-infoleak
  net: usb: ax88179_178a: avoid the interface always configured as random address
  net: dsa: sja1105: Fix parameters order in sja1110_pcs_mdio_write_c45()
  net: ravb: Always update error counters
  net: ravb: Always process TX descriptor ring
  netfilter: nf_tables: discard table flag update with pending basechain deletion
  netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
  netfilter: nf_tables: reject new basechain after table flag update
  netfilter: nf_tables: flush pending destroy work before exit_net release
  netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
  netfilter: nf_tables: release batch on table validation from abort path
  Revert "tg3: Remove residual error handling in tg3_suspend"
  tg3: Remove residual error handling in tg3_suspend
  net: mana: Fix Rx DMA datasize and skb_over_panic
  net/sched: fix lockdep splat in qdisc_tree_reduce_backlog()
  net: phy: micrel: lan8814: Fix when enabling/disabling 1-step timestamping
  net: stmmac: fix rx queue priority assignment
  net: txgbe: fix i2c dev name cannot match clkdev
  net: fec: Set mac_managed_pm during probe
  ...

Merge tag 'bcachefs-2024-04-03' of https://evilpiepirate.org/git/bcachefs

Pull bcachefs repair code from Kent Overstreet:
"A couple more small fixes, and new repair code.

  We can now automatically recover from arbitrary corrupted interior
  btree nodes by scanning, and we can reconstruct metadata as needed to
  bring a filesystem back into a working, consistent, read-write state
  and preserve access to whatevver wasn't corrupted.

  Meaning - you can blow away all metadata except for extents and
  dirents leaf nodes, and repair will reconstruct everything else and
  give you your data, and under the correct paths. If inodes are missing
  i_size will be slightly off and permissions/ownership/timestamps will
  be gone, and we do still need the snapshots btree if snapshots were in
  use - in the future we'll be able to guess the snapshot tree structure
  in some situations.

  IOW - aside from shaking out remaining bugs (fuzz testing is still
  coming), repair code should be complete and if repair ever doesn't
  work that's the highest priority bug that I want to know about
  immediately.

  This patchset was kindly tested by a user from India who accidentally
  wiped one drive out of a three drive filesystem with no replication on
  the family computer - it took a couple weeks but we got everything
  important back"

* tag 'bcachefs-2024-04-03' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: reconstruct_inode()
  bcachefs: Subvolume reconstruction
  bcachefs: Check for extents that point to same space
  bcachefs: Reconstruct missing snapshot nodes
  bcachefs: Flag btrees with missing data
  bcachefs: Topology repair now uses nodes found by scanning to fill holes
  bcachefs: Repair pass for scanning for btree nodes
  bcachefs: Don't skip fake btree roots in fsck
  bcachefs: bch2_btree_root_alloc() -> bch2_btree_root_alloc_fake()
  bcachefs: Etyzinger cleanups
  bcachefs: bch2_shoot_down_journal_keys()
  bcachefs: Clear recovery_passes_required as they complete without errors
  bcachefs: ratelimit informational fsck errors
  bcachefs: Check for bad needs_discard before doing discard
  bcachefs: Improve bch2_btree_update_to_text()
  mean_and_variance: Drop always failing tests
  bcachefs: fix nocow lock deadlock
  bcachefs: BCH_WATERMARK_interior_updates
  bcachefs: Fix btree node reserve

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2024-04-04

We've added 7 non-merge commits during the last 5 day(s) which contain
a total of 9 files changed, 75 insertions(+), 24 deletions(-).

The main changes are:

1) Fix x86 BPF JIT under retbleed=stuff which causes kernel panics due to
   incorrect destination IP calculation and incorrect IP for relocations,
   from Uros Bizjak and Joan Bruguera Micó.

2) Fix BPF arena file descriptor leaks in the verifier,
   from Anton Protopopov.

3) Defer bpf_link deallocation to after RCU grace period as currently
   running multi-{kprobes,uprobes} programs might still access cookie
   information from the link, from Andrii Nakryiko.

4) Fix a BPF sockmap lock inversion deadlock in map_delete_elem reported
   by syzkaller, from Jakub Sitnicki.

5) Fix resolve_btfids build with musl libc due to missing linux/types.h
   include, from Natanael Copa.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, sockmap: Prevent lock inversion deadlock in map delete elem
  x86/bpf: Fix IP for relocating call depth accounting
  x86/bpf: Fix IP after emitting call depth accounting
  bpf: fix possible file descriptor leaks in verifier
  tools/resolve_btfids: fix build with musl libc
  bpf: support deferring bpf_link dealloc to after RCU grace period
  bpf: put uprobe link's path and task in release callback
====================

Link: https://lore.kernel.org/r/20240404183258.4401-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netfilter: validate user input for expected length

I got multiple syzbot reports showing old bugs exposed
by BPF after commit 20f2505fb436 ("bpf: Try to avoid kzalloc
in cgroup/{s,g}etsockopt")

setsockopt() @optlen argument should be taken into account
before copying data.

BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in do_replace net/ipv4/netfilter/ip_tables.c:1111 [inline]
BUG: KASAN: slab-out-of-bounds in do_ipt_set_ctl+0x902/0x3dd0 net/ipv4/netfilter/ip_tables.c:1627
Read of size 96 at addr ffff88802cd73da0 by task syz-executor.4/7238

CPU: 1 PID: 7238 Comm: syz-executor.4 Not tainted 6.9.0-rc2-next-20240403-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call Trace:
<TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
  print_address_description mm/kasan/report.c:377 [inline]
  print_report+0x169/0x550 mm/kasan/report.c:488
  kasan_report+0x143/0x180 mm/kasan/report.c:601
  kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
  __asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105
  copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
  copy_from_sockptr include/linux/sockptr.h:55 [inline]
  do_replace net/ipv4/netfilter/ip_tables.c:1111 [inline]
  do_ipt_set_ctl+0x902/0x3dd0 net/ipv4/netfilter/ip_tables.c:1627
  nf_setsockopt+0x295/0x2c0 net/netfilter/nf_sockopt.c:101
  do_sock_setsockopt+0x3af/0x720 net/socket.c:2311
  __sys_setsockopt+0x1ae/0x250 net/socket.c:2334
  __do_sys_setsockopt net/socket.c:2343 [inline]
  __se_sys_setsockopt net/socket.c:2340 [inline]
  __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340
do_syscall_64+0xfb/0x240
entry_SYSCALL_64_after_hwframe+0x72/0x7a
RIP: 0033:0x7fd22067dde9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fd21f9ff0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 00007fd2207abf80 RCX: 00007fd22067dde9
RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007fd2206ca47a R08: 0000000000000001 R09: 0000000000000000
R10: 0000000020000880 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007fd2207abf80 R15: 00007ffd2d0170d8
</TASK>

Allocated by task 7238:
  kasan_save_stack mm/kasan/common.c:47 [inline]
  kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
  poison_kmalloc_redzone mm/kasan/common.c:370 [inline]
  __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387
  kasan_kmalloc include/linux/kasan.h:211 [inline]
  __do_kmalloc_node mm/slub.c:4069 [inline]
  __kmalloc_noprof+0x200/0x410 mm/slub.c:4082
  kmalloc_noprof include/linux/slab.h:664 [inline]
  __cgroup_bpf_run_filter_setsockopt+0xd47/0x1050 kernel/bpf/cgroup.c:1869
  do_sock_setsockopt+0x6b4/0x720 net/socket.c:2293
  __sys_setsockopt+0x1ae/0x250 net/socket.c:2334
  __do_sys_setsockopt net/socket.c:2343 [inline]
  __se_sys_setsockopt net/socket.c:2340 [inline]
  __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340
do_syscall_64+0xfb/0x240
entry_SYSCALL_64_after_hwframe+0x72/0x7a

The buggy address belongs to the object at ffff88802cd73da0
which belongs to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes inside of
allocated 1-byte region [ffff88802cd73da0, ffff88802cd73da1)

The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802cd73020 pfn:0x2cd73
flags: 0xfff80000000000(node=0|zone=1|lastcpupid=0xfff)
page_type: 0xffffefff(slab)
raw: 00fff80000000000 ffff888015041280 dead000000000100 dead000000000122
raw: ffff88802cd73020 000000008080007f 00000001ffffefff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x12cc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY), pid 5103, tgid 2119833701 (syz-executor.4), ts 5103, free_ts 70804600828
  set_page_owner include/linux/page_owner.h:32 [inline]
  post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1490
  prep_new_page mm/page_alloc.c:1498 [inline]
  get_page_from_freelist+0x2e7e/0x2f40 mm/page_alloc.c:3454
  __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4712
  __alloc_pages_node_noprof include/linux/gfp.h:244 [inline]
  alloc_pages_node_noprof include/linux/gfp.h:271 [inline]
  alloc_slab_page+0x5f/0x120 mm/slub.c:2249
  allocate_slab+0x5a/0x2e0 mm/slub.c:2412
  new_slab mm/slub.c:2465 [inline]
  ___slab_alloc+0xcd1/0x14b0 mm/slub.c:3615
  __slab_alloc+0x58/0xa0 mm/slub.c:3705
  __slab_alloc_node mm/slub.c:3758 [inline]
  slab_alloc_node mm/slub.c:3936 [inline]
  __do_kmalloc_node mm/slub.c:4068 [inline]
  kmalloc_node_track_caller_noprof+0x286/0x450 mm/slub.c:4089
  kstrdup+0x3a/0x80 mm/util.c:62
  device_rename+0xb5/0x1b0 drivers/base/core.c:4558
  dev_change_name+0x275/0x860 net/core/dev.c:1232
  do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2864
  __rtnl_newlink net/core/rtnetlink.c:3680 [inline]
  rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3727
  rtnetlink_rcv_msg+0x89b/0x10d0 net/core/rtnetlink.c:6594
  netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2559
  netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
  netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
page last free pid 5146 tgid 5146 stack trace:
  reset_page_owner include/linux/page_owner.h:25 [inline]
  free_pages_prepare mm/page_alloc.c:1110 [inline]
  free_unref_page+0xd3c/0xec0 mm/page_alloc.c:2617
  discard_slab mm/slub.c:2511 [inline]
  __put_partials+0xeb/0x130 mm/slub.c:2980
  put_cpu_partial+0x17c/0x250 mm/slub.c:3055
  __slab_free+0x2ea/0x3d0 mm/slub.c:4254
  qlink_free mm/kasan/quarantine.c:163 [inline]
  qlist_free_all+0x9e/0x140 mm/kasan/quarantine.c:179
  kasan_quarantine_reduce+0x14f/0x170 mm/kasan/quarantine.c:286
  __kasan_slab_alloc+0x23/0x80 mm/kasan/common.c:322
  kasan_slab_alloc include/linux/kasan.h:201 [inline]
  slab_post_alloc_hook mm/slub.c:3888 [inline]
  slab_alloc_node mm/slub.c:3948 [inline]
  __do_kmalloc_node mm/slub.c:4068 [inline]
  __kmalloc_node_noprof+0x1d7/0x450 mm/slub.c:4076
  kmalloc_node_noprof include/linux/slab.h:681 [inline]
  kvmalloc_node_noprof+0x72/0x190 mm/util.c:634
  bucket_table_alloc lib/rhashtable.c:186 [inline]
  rhashtable_rehash_alloc+0x9e/0x290 lib/rhashtable.c:367
  rht_deferred_worker+0x4e1/0x2440 lib/rhashtable.c:427
  process_one_work kernel/workqueue.c:3218 [inline]
  process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3299
  worker_thread+0x86d/0xd70 kernel/workqueue.c:3380
  kthread+0x2f0/0x390 kernel/kthread.c:388
  ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
  ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243

Memory state around the buggy address:
ffff88802cd73c80: 07 fc fc fc 05 fc fc fc 05 fc fc fc fa fc fc fc
ffff88802cd73d00: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
>ffff88802cd73d80: fa fc fc fc 01 fc fc fc fa fc fc fc fa fc fc fc
                               ^
ffff88802cd73e00: fa fc fc fc fa fc fc fc 05 fc fc fc 07 fc fc fc
ffff88802cd73e80: 07 fc fc fc 07 fc fc fc 07 fc fc fc 07 fc fc fc

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20240404122051.2303764-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'nf-24-04-04' of git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

Patch #1 unlike early commit path stage which triggers a call to abort,
         an explicit release of the batch is required on abort, otherwise
         mutex is released and commit_list remains in place.

Patch #2 release mutex after nft_gc_seq_end() in commit path, otherwise
         async GC worker could collect expired objects.

Patch #3 flush pending destroy work in module removal path, otherwise UaF
         is possible.

Patch #4 and #6 restrict the table dormant flag with basechain updates
to fix state inconsistency in the hook registration.

Patch #5 adds missing RCU read side lock to flowtable type to avoid races
with module removal.

* tag 'nf-24-04-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: discard table flag update with pending basechain deletion
  netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
  netfilter: nf_tables: reject new basechain after table flag update
  netfilter: nf_tables: flush pending destroy work before exit_net release
  netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
  netfilter: nf_tables: release batch on table validation from abort path
====================

Link: https://lore.kernel.org/r/20240404104334.1627-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-04-03 (ice, idpf)

This series contains updates to ice and idpf drivers.

Dan Carpenter initializes some pointer declarations to NULL as needed for
resource cleanup on ice driver.

Petr Oros corrects assignment of VLAN operators to fix Rx VLAN filtering
in legacy mode for ice.

Joshua calls eth_type_trans() on unknown packets to prevent possible
kernel panic on idpf.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  idpf: fix kernel panic on unknown packet types
  ice: fix enabling RX VLAN filtering
  ice: Fix freeing uninitialized pointers
====================

Link: https://lore.kernel.org/r/20240403201929.1945116-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: act_skbmod: prevent kernel-infoleak

syzbot found that tcf_skbmod_dump() was copying four bytes
from kernel stack to user space [1].

The issue here is that 'struct tc_skbmod' has a four bytes hole.

We need to clear the structure before filling fields.

[1]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline]
BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline]
BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185
  instrument_copy_to_user include/linux/instrumented.h:114 [inline]
  copy_to_user_iter lib/iov_iter.c:24 [inline]
  iterate_ubuf include/linux/iov_iter.h:29 [inline]
  iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
  iterate_and_advance include/linux/iov_iter.h:271 [inline]
  _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185
  copy_to_iter include/linux/uio.h:196 [inline]
  simple_copy_to_iter net/core/datagram.c:532 [inline]
  __skb_datagram_iter+0x185/0x1000 net/core/datagram.c:420
  skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546
  skb_copy_datagram_msg include/linux/skbuff.h:4050 [inline]
  netlink_recvmsg+0x432/0x1610 net/netlink/af_netlink.c:1962
  sock_recvmsg_nosec net/socket.c:1046 [inline]
  sock_recvmsg+0x2c4/0x340 net/socket.c:1068
  __sys_recvfrom+0x35a/0x5f0 net/socket.c:2242
  __do_sys_recvfrom net/socket.c:2260 [inline]
  __se_sys_recvfrom net/socket.c:2256 [inline]
  __x64_sys_recvfrom+0x126/0x1d0 net/socket.c:2256
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75

Uninit was stored to memory at:
  pskb_expand_head+0x30f/0x19d0 net/core/skbuff.c:2253
  netlink_trim+0x2c2/0x330 net/netlink/af_netlink.c:1317
  netlink_unicast+0x9f/0x1260 net/netlink/af_netlink.c:1351
  nlmsg_unicast include/net/netlink.h:1144 [inline]
  nlmsg_notify+0x21d/0x2f0 net/netlink/af_netlink.c:2610
  rtnetlink_send+0x73/0x90 net/core/rtnetlink.c:741
  rtnetlink_maybe_send include/linux/rtnetlink.h:17 [inline]
  tcf_add_notify net/sched/act_api.c:2048 [inline]
  tcf_action_add net/sched/act_api.c:2071 [inline]
  tc_ctl_action+0x146e/0x19d0 net/sched/act_api.c:2119
  rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595
  netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2559
  rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6613
  netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
  netlink_unicast+0xf4c/0x1260 net/netlink/af_netlink.c:1361
  netlink_sendmsg+0x10df/0x11f0 net/netlink/af_netlink.c:1905
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  ____sys_sendmsg+0x877/0xb60 net/socket.c:2584
  ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
  __sys_sendmsg net/socket.c:2667 [inline]
  __do_sys_sendmsg net/socket.c:2676 [inline]
  __se_sys_sendmsg net/socket.c:2674 [inline]
  __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75

Uninit was stored to memory at:
  __nla_put lib/nlattr.c:1041 [inline]
  nla_put+0x1c6/0x230 lib/nlattr.c:1099
  tcf_skbmod_dump+0x23f/0xc20 net/sched/act_skbmod.c:256
  tcf_action_dump_old net/sched/act_api.c:1191 [inline]
  tcf_action_dump_1+0x85e/0x970 net/sched/act_api.c:1227
  tcf_action_dump+0x1fd/0x460 net/sched/act_api.c:1251
  tca_get_fill+0x519/0x7a0 net/sched/act_api.c:1628
  tcf_add_notify_msg net/sched/act_api.c:2023 [inline]
  tcf_add_notify net/sched/act_api.c:2042 [inline]
  tcf_action_add net/sched/act_api.c:2071 [inline]
  tc_ctl_action+0x1365/0x19d0 net/sched/act_api.c:2119
  rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595
  netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2559
  rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6613
  netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
  netlink_unicast+0xf4c/0x1260 net/netlink/af_netlink.c:1361
  netlink_sendmsg+0x10df/0x11f0 net/netlink/af_netlink.c:1905
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  ____sys_sendmsg+0x877/0xb60 net/socket.c:2584
  ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
  __sys_sendmsg net/socket.c:2667 [inline]
  __do_sys_sendmsg net/socket.c:2676 [inline]
  __se_sys_sendmsg net/socket.c:2674 [inline]
  __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75

Local variable opt created at:
  tcf_skbmod_dump+0x9d/0xc20 net/sched/act_skbmod.c:244
  tcf_action_dump_old net/sched/act_api.c:1191 [inline]
  tcf_action_dump_1+0x85e/0x970 net/sched/act_api.c:1227

Bytes 188-191 of 248 are uninitialized
Memory access of size 248 starts at ffff888117697680
Data copied to user address 00007ffe56d855f0

Fixes: 86da71b57383 ("net_sched: Introduce skbmod action")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240403130908.93421-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: usb: ax88179_178a: avoid the interface always configured as random address

After the commit d2689b6a86b9 ("net: usb: ax88179_178a: avoid two
consecutive device resets"), reset is not executed from bind operation and
mac address is not read from the device registers or the devicetree at that
moment. Since the check to configure if the assigned mac address is random
or not for the interface, happens after the bind operation from
usbnet_probe, the interface keeps configured as random address, although the
address is correctly read and set during open operation (the only reset
now).

In order to keep only one reset for the device and to avoid the interface
always configured as random address, after reset, configure correctly the
suitable field from the driver, if the mac address is read successfully from
the device registers or the devicetree. Take into account if a locally
administered address (random) was previously stored.

cc: stable@vger.kernel.org # 6.6+
Fixes: d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets")
Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240403132158.344838-1-jtornosm@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: sja1105: Fix parameters order in sja1110_pcs_mdio_write_c45()

The definition and declaration of sja1110_pcs_mdio_write_c45() don't have
parameters in the same order.

Knowing that sja1110_pcs_mdio_write_c45() is used as a function pointer
in 'sja1105_info' structure with .pcs_mdio_write_c45, and that we have:

int (*pcs_mdio_write_c45)(struct mii_bus *bus, int phy, int mmd,
int reg, u16 val);

it is likely that the definition is the one to change.

Found with cppcheck, funcArgOrderDifferent.

Fixes: ae271547bba6 ("net: dsa: sja1105: C45 only transactions for PCS")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/ff2a5af67361988b3581831f7bd1eddebfb4c48f.1712082763.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: ravb: Always update error counters

The error statistics should be updated each time the poll function is
called, even if the full RX work budget has been consumed. This prevents
the counts from becoming stuck when RX bandwidth usage is high.

This also ensures that error counters are not updated after we've
re-enabled interrupts as that could result in a race condition.

Also drop an unnecessary space.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20240402145305.82148-2-paul.barker.ct@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: ravb: Always process TX descriptor ring

The TX queue should be serviced each time the poll function is called,
even if the full RX work budget has been consumed. This prevents
starvation of the TX queue when RX bandwidth usage is high.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20240402145305.82148-1-paul.barker.ct@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netfilter: nf_tables: discard table flag update with pending basechain deletion

Hook unregistration is deferred to the commit phase, same occurs with
hook updates triggered by the table dormant flag. When both commands are
combined, this results in deleting a basechain while leaving its hook
still registered in the core.

Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()

nft_unregister_flowtable_type() within nf_flow_inet_module_exit() can
concurrent with __nft_flowtable_type_get() within nf_tables_newflowtable().
And thhere is not any protection when iterate over nf_tables_flowtables
list in __nft_flowtable_type_get(). Therefore, there is pertential
data-race of nf_tables_flowtables list entry.

Use list_for_each_entry_rcu() to iterate over nf_tables_flowtables list
in __nft_flowtable_type_get(), and use rcu_read_lock() in the caller
nft_flowtable_type_get() to protect the entire type query process.

Fixes: 3b49e2e94e6e ("netfilter: nf_tables: add flow table netlink frontend")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: reject new basechain after table flag update

When dormant flag is toggled, hooks are disabled in the commit phase by
iterating over current chains in table (existing and new).

The following configuration allows for an inconsistent state:

  add table x
  add chain x y { type filter hook input priority 0; }
  add table x { flags dormant; }
  add chain x w { type filter hook input priority 1; }

which triggers the following warning when trying to unregister chain w
which is already unregistered.

[  127.322252] WARNING: CPU: 7 PID: 1211 at net/netfilter/core.c:50                                                                     1 __nf_unregister_net_hook+0x21a/0x260
[...]
[  127.322519] Call Trace:
[  127.322521]  <TASK>
[  127.322524]  ? __warn+0x9f/0x1a0
[  127.322531]  ? __nf_unregister_net_hook+0x21a/0x260
[  127.322537]  ? report_bug+0x1b1/0x1e0
[  127.322545]  ? handle_bug+0x3c/0x70
[  127.322552]  ? exc_invalid_op+0x17/0x40
[  127.322556]  ? asm_exc_invalid_op+0x1a/0x20
[  127.322563]  ? kasan_save_free_info+0x3b/0x60
[  127.322570]  ? __nf_unregister_net_hook+0x6a/0x260
[  127.322577]  ? __nf_unregister_net_hook+0x21a/0x260
[  127.322583]  ? __nf_unregister_net_hook+0x6a/0x260
[  127.322590]  ? __nf_tables_unregister_hook+0x8a/0xe0 [nf_tables]
[  127.322655]  nft_table_disable+0x75/0xf0 [nf_tables]
[  127.322717]  nf_tables_commit+0x2571/0x2620 [nf_tables]

Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: flush pending destroy work before exit_net release

Similar to 2c9f0293280e ("netfilter: nf_tables: flush pending destroy
work before netlink notifier") to address a race between exit_net and
the destroy workqueue.

The trace below shows an element to be released via destroy workqueue
while exit_net path (triggered via module removal) has already released
the set that is used in such transaction.

[ 1360.547789] BUG: KASAN: slab-use-after-free in nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables]
[ 1360.547861] Read of size 8 at addr ffff888140500cc0 by task kworker/4:1/152465
[ 1360.547870] CPU: 4 PID: 152465 Comm: kworker/4:1 Not tainted 6.8.0+ #359
[ 1360.547882] Workqueue: events nf_tables_trans_destroy_work [nf_tables]
[ 1360.547984] Call Trace:
[ 1360.547991]  <TASK>
[ 1360.547998]  dump_stack_lvl+0x53/0x70
[ 1360.548014]  print_report+0xc4/0x610
[ 1360.548026]  ? __virt_addr_valid+0xba/0x160
[ 1360.548040]  ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 1360.548054]  ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables]
[ 1360.548176]  kasan_report+0xae/0xe0
[ 1360.548189]  ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables]
[ 1360.548312]  nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables]
[ 1360.548447]  ? __pfx_nf_tables_trans_destroy_work+0x10/0x10 [nf_tables]
[ 1360.548577]  ? _raw_spin_unlock_irq+0x18/0x30
[ 1360.548591]  process_one_work+0x2f1/0x670
[ 1360.548610]  worker_thread+0x4d3/0x760
[ 1360.548627]  ? __pfx_worker_thread+0x10/0x10
[ 1360.548640]  kthread+0x16b/0x1b0
[ 1360.548653]  ? __pfx_kthread+0x10/0x10
[ 1360.548665]  ret_from_fork+0x2f/0x50
[ 1360.548679]  ? __pfx_kthread+0x10/0x10
[ 1360.548690]  ret_from_fork_asm+0x1a/0x30
[ 1360.548707]  </TASK>

[ 1360.548719] Allocated by task 192061:
[ 1360.548726]  kasan_save_stack+0x20/0x40
[ 1360.548739]  kasan_save_track+0x14/0x30
[ 1360.548750]  __kasan_kmalloc+0x8f/0xa0
[ 1360.548760]  __kmalloc_node+0x1f1/0x450
[ 1360.548771]  nf_tables_newset+0x10c7/0x1b50 [nf_tables]
[ 1360.548883]  nfnetlink_rcv_batch+0xbc4/0xdc0 [nfnetlink]
[ 1360.548909]  nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink]
[ 1360.548927]  netlink_unicast+0x367/0x4f0
[ 1360.548935]  netlink_sendmsg+0x34b/0x610
[ 1360.548944]  ____sys_sendmsg+0x4d4/0x510
[ 1360.548953]  ___sys_sendmsg+0xc9/0x120
[ 1360.548961]  __sys_sendmsg+0xbe/0x140
[ 1360.548971]  do_syscall_64+0x55/0x120
[ 1360.548982]  entry_SYSCALL_64_after_hwframe+0x55/0x5d

[ 1360.548994] Freed by task 192222:
[ 1360.548999]  kasan_save_stack+0x20/0x40
[ 1360.549009]  kasan_save_track+0x14/0x30
[ 1360.549019]  kasan_save_free_info+0x3b/0x60
[ 1360.549028]  poison_slab_object+0x100/0x180
[ 1360.549036]  __kasan_slab_free+0x14/0x30
[ 1360.549042]  kfree+0xb6/0x260
[ 1360.549049]  __nft_release_table+0x473/0x6a0 [nf_tables]
[ 1360.549131]  nf_tables_exit_net+0x170/0x240 [nf_tables]
[ 1360.549221]  ops_exit_list+0x50/0xa0
[ 1360.549229]  free_exit_list+0x101/0x140
[ 1360.549236]  unregister_pernet_operations+0x107/0x160
[ 1360.549245]  unregister_pernet_subsys+0x1c/0x30
[ 1360.549254]  nf_tables_module_exit+0x43/0x80 [nf_tables]
[ 1360.549345]  __do_sys_delete_module+0x253/0x370
[ 1360.549352]  do_syscall_64+0x55/0x120
[ 1360.549360]  entry_SYSCALL_64_after_hwframe+0x55/0x5d

(gdb) list *__nft_release_table+0x473
0x1e033 is in __nft_release_table (net/netfilter/nf_tables_api.c:11354).
11349           list_for_each_entry_safe(flowtable, nf, &table->flowtables, list) {
11350                   list_del(&flowtable->list);
11351                   nft_use_dec(&table->use);
11352                   nf_tables_flowtable_destroy(flowtable);
11353           }
11354           list_for_each_entry_safe(set, ns, &table->sets, list) {
11355                   list_del(&set->list);
11356                   nft_use_dec(&table->use);
11357                   if (set->flags & (NFT_SET_MAP | NFT_SET_OBJECT))
11358                           nft_map_deactivate(&ctx, set);
(gdb)

[ 1360.549372] Last potentially related work creation:
[ 1360.549376]  kasan_save_stack+0x20/0x40
[ 1360.549384]  __kasan_record_aux_stack+0x9b/0xb0
[ 1360.549392]  __queue_work+0x3fb/0x780
[ 1360.549399]  queue_work_on+0x4f/0x60
[ 1360.549407]  nft_rhash_remove+0x33b/0x340 [nf_tables]
[ 1360.549516]  nf_tables_commit+0x1c6a/0x2620 [nf_tables]
[ 1360.549625]  nfnetlink_rcv_batch+0x728/0xdc0 [nfnetlink]
[ 1360.549647]  nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink]
[ 1360.549671]  netlink_unicast+0x367/0x4f0
[ 1360.549680]  netlink_sendmsg+0x34b/0x610
[ 1360.549690]  ____sys_sendmsg+0x4d4/0x510
[ 1360.549697]  ___sys_sendmsg+0xc9/0x120
[ 1360.549706]  __sys_sendmsg+0xbe/0x140
[ 1360.549715]  do_syscall_64+0x55/0x120
[ 1360.549725]  entry_SYSCALL_64_after_hwframe+0x55/0x5d

Fixes: 0935d5588400 ("netfilter: nf_tables: asynchronous release")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path

The commit mutex should not be released during the critical section
between nft_gc_seq_begin() and nft_gc_seq_end(), otherwise, async GC
worker could collect expired objects and get the released commit lock
within the same GC sequence.

nf_tables_module_autoload() temporarily releases the mutex to load
module dependencies, then it goes back to replay the transaction again.
Move it at the end of the abort phase after nft_gc_seq_end() is called.

Cc: stable@vger.kernel.org
Fixes: 720344340fb9 ("netfilter: nf_tables: GC transaction race with abort path")
Reported-by: Kuan-Ting Chen <hexrabbit@devco.re>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: release batch on table validation from abort path

Unlike early commit path stage which triggers a call to abort, an
explicit release of the batch is required on abort, otherwise mutex is
released and commit_list remains in place.

Add WARN_ON_ONCE to ensure commit_list is empty from the abort path
before releasing the mutex.

After this patch, commit_list is always assumed to be empty before
grabbing the mutex, therefore

03c1f1ef1584 ("netfilter: Cleanup nft_net->module_list from nf_tables_exit_net()")

only needs to release the pending modules for registration.

Cc: stable@vger.kernel.org
Fixes: c0391b6ab810 ("netfilter: nf_tables: missing validation from the abort path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Revert "tg3: Remove residual error handling in tg3_suspend"

This reverts commit 9ab4ad295622a3481818856762471c1f8c830e18.

I went out of coffee and applied it to the wrong tree. Blame on me.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

tg3: Remove residual error handling in tg3_suspend

As of now, tg3_power_down_prepare always ends with success, but
the error handling code from former tg3_set_power_state call is still here.

This code became unreachable in commit c866b7eac073 ("tg3: Do not use
legacy PCI power management").

Remove (now unreachable) error handling code for simplification and change
tg3_power_down_prepare to a void function as its result is no more checked.

Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240401191418.361747-1-kiryushin@ancud.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: mana: Fix Rx DMA datasize and skb_over_panic

mana_get_rxbuf_cfg() aligns the RX buffer's DMA datasize to be
multiple of 64. So a packet slightly bigger than mtu+14, say 1536,
can be received and cause skb_over_panic.

Sample dmesg:
[ 5325.237162] skbuff: skb_over_panic: text:ffffffffc043277a len:1536 put:1536 head:ff1100018b517000 data:ff1100018b517100 tail:0x700 end:0x6ea dev:<NULL>
[ 5325.243689] ------------[ cut here ]------------
[ 5325.245748] kernel BUG at net/core/skbuff.c:192!
[ 5325.247838] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 5325.258374] RIP: 0010:skb_panic+0x4f/0x60
[ 5325.302941] Call Trace:
[ 5325.304389]  <IRQ>
[ 5325.315794]  ? skb_panic+0x4f/0x60
[ 5325.317457]  ? asm_exc_invalid_op+0x1f/0x30
[ 5325.319490]  ? skb_panic+0x4f/0x60
[ 5325.321161]  skb_put+0x4e/0x50
[ 5325.322670]  mana_poll+0x6fa/0xb50 [mana]
[ 5325.324578]  __napi_poll+0x33/0x1e0
[ 5325.326328]  net_rx_action+0x12e/0x280

As discussed internally, this alignment is not necessary. To fix
this bug, remove it from the code. So oversized packets will be
marked as CQE_RX_TRUNCATED by NIC, and dropped.

Cc: stable@vger.kernel.org
Fixes: 2fbbd712baf1 ("net: mana: Enable RX path to handle various MTU sizes")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1712087316-20886-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/sched: fix lockdep splat in qdisc_tree_reduce_backlog()

qdisc_tree_reduce_backlog() is called with the qdisc lock held,
not RTNL.

We must use qdisc_lookup_rcu() instead of qdisc_lookup()

syzbot reported:

WARNING: suspicious RCU usage
6.1.74-syzkaller #0 Not tainted
-----------------------------
net/sched/sch_api.c:305 suspicious rcu_dereference_protected() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
3 locks held by udevd/1142:
  #0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:306 [inline]
  #0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:747 [inline]
  #0: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: net_tx_action+0x64a/0x970 net/core/dev.c:5282
  #1: ffff888171861108 (&sch->q.lock){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:350 [inline]
  #1: ffff888171861108 (&sch->q.lock){+.-.}-{2:2}, at: net_tx_action+0x754/0x970 net/core/dev.c:5297
  #2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:306 [inline]
  #2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:747 [inline]
  #2: ffffffff87c729a0 (rcu_read_lock){....}-{1:2}, at: qdisc_tree_reduce_backlog+0x84/0x580 net/sched/sch_api.c:792

stack backtrace:
CPU: 1 PID: 1142 Comm: udevd Not tainted 6.1.74-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Call Trace:
<TASK>
  [<ffffffff85b85f14>] __dump_stack lib/dump_stack.c:88 [inline]
  [<ffffffff85b85f14>] dump_stack_lvl+0x1b1/0x28f lib/dump_stack.c:106
  [<ffffffff85b86007>] dump_stack+0x15/0x1e lib/dump_stack.c:113
  [<ffffffff81802299>] lockdep_rcu_suspicious+0x1b9/0x260 kernel/locking/lockdep.c:6592
  [<ffffffff84f0054c>] qdisc_lookup+0xac/0x6f0 net/sched/sch_api.c:305
  [<ffffffff84f037c3>] qdisc_tree_reduce_backlog+0x243/0x580 net/sched/sch_api.c:811
  [<ffffffff84f5b78c>] pfifo_tail_enqueue+0x32c/0x4b0 net/sched/sch_fifo.c:51
  [<ffffffff84fbcf63>] qdisc_enqueue include/net/sch_generic.h:833 [inline]
  [<ffffffff84fbcf63>] netem_dequeue+0xeb3/0x15d0 net/sched/sch_netem.c:723
  [<ffffffff84eecab9>] dequeue_skb net/sched/sch_generic.c:292 [inline]
  [<ffffffff84eecab9>] qdisc_restart net/sched/sch_generic.c:397 [inline]
  [<ffffffff84eecab9>] __qdisc_run+0x249/0x1e60 net/sched/sch_generic.c:415
  [<ffffffff84d7aa96>] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125
  [<ffffffff84d85d29>] net_tx_action+0x7c9/0x970 net/core/dev.c:5313
  [<ffffffff85e002bd>] __do_softirq+0x2bd/0x9bd kernel/softirq.c:616
  [<ffffffff81568bca>] invoke_softirq kernel/softirq.c:447 [inline]
  [<ffffffff81568bca>] __irq_exit_rcu+0xca/0x230 kernel/softirq.c:700
  [<ffffffff81568ae9>] irq_exit_rcu+0x9/0x20 kernel/softirq.c:712
  [<ffffffff85b89f52>] sysvec_apic_timer_interrupt+0x42/0x90 arch/x86/kernel/apic/apic.c:1107
  [<ffffffff85c00ccb>] asm_sysvec_apic_timer_interrupt+0x1b/0x20 arch/x86/include/asm/idtentry.h:656

Fixes: d636fc5dd692 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240402134133.2352776-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: micrel: lan8814: Fix when enabling/disabling 1-step timestamping

There are 2 issues with the blamed commit.
1. When the phy is initialized, it would enable the disabled of UDPv4
   checksums. The UDPv6 checksum is already enabled by default. So when
   1-step is configured then it would clear these flags.
2. After the 1-step is configured, then if 2-step is configured then the
   1-step would be still configured because it is not clearing the flag.
   So the sync frames will still have origin timestamps set.

Fix this by reading first the value of the register and then
just change bit 12 as this one determines if the timestamp needs to
be inserted in the frame, without changing any other bits.

Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Link: https://lore.kernel.org/r/20240402071634.2483524-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: stmmac: fix rx queue priority assignment

The driver should ensure that same priority is not mapped to multiple
rx queues. From DesignWare Cores Ethernet Quality-of-Service
Databook, section 17.1.29 MAC_RxQ_Ctrl2:
"[...]The software must ensure that the content of this field is
mutually exclusive to the PSRQ fields for other queues, that is,
the same priority is not mapped to multiple Rx queues[...]"

Previously rx_queue_priority() function was:
- clearing all priorities from a queue
- adding new priorities to that queue
After this patch it will:
- first assign new priorities to a queue
- then remove those priorities from all other queues
- keep other priorities previously assigned to that queue

Fixes: a8f5102af2a7 ("net: stmmac: TX and RX queue priority configuration")
Fixes: 2142754f8b9c ("net: stmmac: Add MAC related callbacks for XGMAC2")
Signed-off-by: Piotr Wejman <piotrwejman90@gmail.com>
Link: https://lore.kernel.org/r/20240401192239.33942-1-piotrwejman90@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: txgbe: fix i2c dev name cannot match clkdev

txgbe clkdev shortened clk_name, so i2c_dev info_name
also need to shorten. Otherwise, i2c_dev cannot initialize
clock.

Fixes: e30cef001da2 ("net: txgbe: fix clk_name exceed MAX_DEV_ID limits")
Signed-off-by: Duanqiang Wen <duanqiangwen@net-swift.com>
Link: https://lore.kernel.org/r/20240402021843.126192-1-duanqiangwen@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-fec-fix-to-suspend-resume-with-mac_managed_pm'

John Ernberg says:

====================
net: fec: Fix to suspend / resume with mac_managed_pm

Since the introduction of mac_managed_pm in the FEC driver there were some
discrepancies regarding power management of the PHY.

This failed on our board that has a permanently powered Microchip LAN8700R
attached to the FEC. Although the root cause of the failure can be traced
back to f166f890c8f0 ("net: ethernet: fec: Replace interrupt driven MDIO
with polled IO") and probably even before that, we only started noticing
the problem going from 5.10 to 6.1.

Since 557d5dc83f68 ("net: fec: use mac-managed PHY PM") is actually a fix
to most of the power management sequencing problems that came with power
managing the MDIO bus which for the FEC meant adding a race with FEC
resume (and phy_start() if netif was running) and PHY resume.

That it worked before for us was probably just luck...

Thanks to Wei's response to my report at [1] I was able to pick up his
patch and start honing in on the remaining missing details.

[1]: https://lore.kernel.org/netdev/1f45bdbe-eab1-4e59-8f24-add177590d27@actia.se/

v3: https://lore.kernel.org/netdev/20240306133734.4144808-1-john.ernberg@actia.se/
v2: https://lore.kernel.org/netdev/20240229105256.2903095-1-john.ernberg@actia.se/
v1: https://lore.kernel.org/netdev/20240212105010.2258421-1-john.ernberg@actia.se/
====================

Link: https://lore.kernel.org/r/20240328155909.59613-1-john.ernberg@actia.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: fec: Set mac_managed_pm during probe

Setting mac_managed_pm during interface up is too late.

In situations where the link is not brought up yet and the system suspends
the regular PHY power management will run. Since the FEC ETHEREN control
bit is cleared (automatically) on suspend the controller is off in resume.
When the regular PHY power management resume path runs in this context it
will write to the MII_DATA register but nothing will be transmitted on the
MDIO bus.

This can be observed by the following log:

    fec 5b040000.ethernet eth0: MDIO read timeout
    Microchip LAN87xx T1 5b040000.ethernet-1:04: PM: dpm_run_callback(): mdio_bus_phy_resume+0x0/0xc8 returns -110
    Microchip LAN87xx T1 5b040000.ethernet-1:04: PM: failed to resume: error -110

The data written will however remain in the MII_DATA register.

When the link later is set to administrative up it will trigger a call to
fec_restart() which will restore the MII_SPEED register. This triggers the
quirk explained in f166f890c8f0 ("net: ethernet: fec: Replace interrupt
driven MDIO with polled IO") causing an extra MII_EVENT.

This extra event desynchronizes all the MDIO register reads, causing them
to complete too early. Leading all reads to read as 0 because
fec_enet_mdio_wait() returns too early.

When a Microchip LAN8700R PHY is connected to the FEC, the 0 reads causes
the PHY to be initialized incorrectly and the PHY will not transmit any
ethernet signal in this state. It cannot be brought out of this state
without a power cycle of the PHY.

Fixes: 557d5dc83f68 ("net: fec: use mac-managed PHY PM")
Closes: https://lore.kernel.org/netdev/1f45bdbe-eab1-4e59-8f24-add177590d27@actia.se/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
[jernberg: commit message]
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Link: https://lore.kernel.org/r/20240328155909.59613-2-john.ernberg@actia.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

idpf: fix kernel panic on unknown packet types

In the very rare case where a packet type is unknown to the driver,
idpf_rx_process_skb_fields would return early without calling
eth_type_trans to set the skb protocol / the network layer handler.
This is especially problematic if tcpdump is running when such a
packet is received, i.e. it would cause a kernel panic.

Instead, call eth_type_trans for every single packet, even when
the packet type is unknown.

Fixes: 3a8845af66ed ("idpf: add RX splitq napi poll support")
Reported-by: Balazs Nemeth <bnemeth@redhat.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Salvatore Daniele <sdaniele@redhat.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

bcachefs: reconstruct_inode()

If an inode is missing, but corresponding extents and dirent still
exist, it's well worth recreating it - this does so.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Subvolume reconstruction

We can now recreate missing subvolumes from dirents and/or inodes.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Check for extents that point to same space

In backpointer repair, if we get a missing backpointer - but there's
already a backpointer that points to an existing extent - we've got
multiple extents that point to the same space and need to decide which
to keep.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Reconstruct missing snapshot nodes

When the snapshots btree is going, we'll have to delete huge amounts of
data - unless we can reconstruct it by looking at the keys that refer to
it.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Flag btrees with missing data

We need this to know when we should attempt to reconstruct the snapshots
btree

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Topology repair now uses nodes found by scanning to fill holes

With the new btree node scan code, we can now recover from corrupt btree
roots - simply create a new fake root at depth 1, and then insert all
the leaves we found.

If the root wasn't corrupt but there's corruption elsewhere in the
btree, we can fill in holes as needed with the newest version of a given
node(s) from the scan; we also check if a given btree node is older than
what we found from the scan.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Repair pass for scanning for btree nodes

If a btree root or interior btree node goes bad, we're going to lose a
lot of data, unless we can recover the nodes that it pointed to by
scanning.

Fortunately btree node headers are fully self describing, and
additionally the magic number is xored with the filesytem UUID, so we
can do so safely.

This implements the scanning - next patch will rework topology repair to
make use of the found nodes.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Don't skip fake btree roots in fsck

When a btree root is unreadable, we might still have keys fro the
journal to walk and mark.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_btree_root_alloc() -> bch2_btree_root_alloc_fake()

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Etyzinger cleanups

Pull out eytzinger.c and kill eytzinger_cmp_fn. We now provide
eytzinger0_sort and eytzinger0_sort_r, which use the standard cmp_func_t
and cmp_r_func_t callbacks.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: bch2_shoot_down_journal_keys()

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Clear recovery_passes_required as they complete without errors

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Merge tag 'vboxsf-v6.9-1' of git://git./linux/kernel/git/hansg/linux

Pull vboxsf fixes from Hans de Goede:

- Compiler warning fixes

- Explicitly deny setlease attempts

* tag 'vboxsf-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hansg/linux:
  vboxsf: explicitly deny setlease attempts
  vboxsf: Remove usage of the deprecated ida_simple_xx() API
  vboxsf: Avoid an spurious warning if load_nls_xxx() fails
  vboxsf: remove redundant variable out_len

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
"ARM:

   - Ensure perf events programmed to count during guest execution are
     actually enabled before entering the guest in the nVHE
     configuration

   - Restore out-of-range handler for stage-2 translation faults

   - Several fixes to stage-2 TLB invalidations to avoid stale
     translations, possibly including partial walk caches

   - Fix early handling of architectural VHE-only systems to ensure E2H
     is appropriately set

   - Correct a format specifier warning in the arch_timer selftest

   - Make the KVM banner message correctly handle all of the possible
     configurations

  RISC-V:

   - Remove redundant semicolon in num_isa_ext_regs()

   - Fix APLIC setipnum_le/be write emulation

   - Fix APLIC in_clrip[x] read emulation

  x86:

   - Fix a bug in KVM_SET_CPUID{2,} where KVM looks at the wrong CPUID
     entries (old vs. new) and ultimately neglects to clear PV_UNHALT
     from vCPUs with HLT-exiting disabled

   - Documentation fixes for SEV

   - Fix compat ABI for KVM_MEMORY_ENCRYPT_OP

   - Fix a 14-year-old goof in a declaration shared by host and guest;
     the enabled field used by Linux when running as a guest pushes the
     size of "struct kvm_vcpu_pv_apf_data" from 64 to 68 bytes. This is
     really unconsequential because KVM never consumes anything beyond
     the first 64 bytes, but the resulting struct does not match the
     documentation

  Selftests:

   - Fix spelling mistake in arch_timer selftest"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
  KVM: arm64: Rationalise KVM banner output
  arm64: Fix early handling of FEAT_E2H0 not being implemented
  KVM: arm64: Ensure target address is granule-aligned for range TLBI
  KVM: arm64: Use TLBI_TTL_UNKNOWN in __kvm_tlb_flush_vmid_range()
  KVM: arm64: Don't pass a TLBI level hint when zapping table entries
  KVM: arm64: Don't defer TLB invalidation when zapping table entries
  KVM: selftests: Fix __GUEST_ASSERT() format warnings in ARM's arch timer test
  KVM: arm64: Fix out-of-IPA space translation fault handling
  KVM: arm64: Fix host-programmed guest events in nVHE
  RISC-V: KVM: Fix APLIC in_clrip[x] read emulation
  RISC-V: KVM: Fix APLIC setipnum_le/be write emulation
  RISC-V: KVM: Remove second semicolon
  KVM: selftests: Fix spelling mistake "trigged" -> "triggered"
  Documentation: kvm/sev: clarify usage of KVM_MEMORY_ENCRYPT_OP
  Documentation: kvm/sev: separate description of firmware
  KVM: SEV: fix compat ABI for KVM_MEMORY_ENCRYPT_OP
  KVM: selftests: Check that PV_UNHALT is cleared when HLT exiting is disabled
  KVM: x86: Use actual kvm_cpuid.base for clearing KVM_FEATURE_PV_UNHALT
  KVM: x86: Introduce __kvm_get_hypervisor_cpuid() helper
  KVM: SVM: Return -EINVAL instead of -EBUSY on attempt to re-init SEV/SEV-ES
  ...

security: Place security_path_post_mknod() where the original IMA call was

Commit 08abce60d63f ("security: Introduce path_post_mknod hook")
introduced security_path_post_mknod(), to replace the IMA-specific call
to ima_post_path_mknod().

For symmetry with security_path_mknod(), security_path_post_mknod() was
called after a successful mknod operation, for any file type, rather
than only for regular files at the time there was the IMA call.

However, as reported by VFS maintainers, successful mknod operation does
not mean that the dentry always has an inode attached to it (for
example, not for FIFOs on a SAMBA mount).

If that condition happens, the kernel crashes when
security_path_post_mknod() attempts to verify if the inode associated to
the dentry is private.

Move security_path_post_mknod() where the ima_post_path_mknod() call was,
which is obviously correct from IMA/EVM perspective. IMA/EVM are the only
in-kernel users, and only need to inspect regular files.

Reported-by: Steve French <smfrench@gmail.com>
Closes: https://lore.kernel.org/linux-kernel/CAH2r5msAVzxCUHHG8VKrMPUKQHmBpE6K9_vjhgDa1uAvwx4ppw@mail.gmail.com/
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 08abce60d63f ("security: Introduce path_post_mknod hook")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86/retpoline: Do the necessary fixup to the Zen3/4 srso return thunk for !SRSO

The srso_alias_untrain_ret() dummy thunk in the !CONFIG_MITIGATION_SRSO
case is there only for the altenative in CALL_UNTRAIN_RET to have
a symbol to resolve.

However, testing with kernels which don't have CONFIG_MITIGATION_SRSO
enabled, leads to the warning in patch_return() to fire:

  missing return thunk: srso_alias_untrain_ret+0x0/0x10-0x0: eb 0e 66 66 2e
  WARNING: CPU: 0 PID: 0 at arch/x86/kernel/alternative.c:826 apply_returns (arch/x86/kernel/alternative.c:826

Put in a plain "ret" there so that gcc doesn't put a return thunk in
in its place which special and gets checked.

In addition:

  ERROR: modpost: "srso_alias_untrain_ret" [arch/x86/kvm/kvm-amd.ko] undefined!
  make[2]: *** [scripts/Makefile.modpost:145: Module.symvers] Chyba 1
  make[1]: *** [/usr/src/linux-6.8.3/Makefile:1873: modpost] Chyba 2
  make: *** [Makefile:240: __sub-make] Chyba 2

since !SRSO builds would use the dummy return thunk as reported by
petr.pisar@atlas.cz, https://bugzilla.kernel.org/show_bug.cgi?id=218679.

Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202404020901.da75a60f-oliver.sang@intel.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/202404020901.da75a60f-oliver.sang@intel.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ice: fix enabling RX VLAN filtering

ice_port_vlan_on/off() was introduced in commit 2946204b3fa8 ("ice:
implement bridge port vlan"). But ice_port_vlan_on() incorrectly assigns
ena_rx_filtering to inner_vlan_ops in DVM mode.
This causes an error when rx_filtering cannot be enabled in legacy mode.

Reproducer:
echo 1 > /sys/class/net/$PF/device/sriov_numvfs
ip link set $PF vf 0 spoofchk off trust on vlan 3
dmesg:
ice 0000:41:00.0: failed to enable Rx VLAN filtering for VF 0 VSI 9 during VF rebuild, error -95

Fixes: 2946204b3fa8 ("ice: implement bridge port vlan")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: Fix freeing uninitialized pointers

Automatically cleaned up pointers need to be initialized before exiting
their scope. In this case, they need to be initialized to NULL before
any return statement.

Fixes: 90f821d72e11 ("ice: avoid unnecessary devm_ usage")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

vboxsf: explicitly deny setlease attempts

vboxsf does not break leases on its own, so it can't properly handle the
case where the hypervisor changes the data. Don't allow file leases on
vboxsf.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240319-setlease-v1-1-5997d67e04b3@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

vboxsf: Remove usage of the deprecated ida_simple_xx() API

ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().

This is less verbose.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/b3c057c86b73f0309a6362031d21f4d7ebb60587.1698835730.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

vboxsf: Avoid an spurious warning if load_nls_xxx() fails

If an load_nls_xxx() function fails a few lines above, the 'sbi->bdi_id' is
still 0.
So, in the error handling path, we will call ida_simple_remove(..., 0)
which is not allocated yet.

In order to prevent a spurious "ida_free called for id=0 which is not
allocated." message, tweak the error handling path and add a new label.

Fixes: 0fd169576648 ("fs: Add VirtualBox guest shared folder (vboxsf) support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d09eaaa4e2e08206c58a1a27ca9b3e81dc168773.1698835730.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

vboxsf: remove redundant variable out_len

The variable out_len is being used to accumulate the number of
bytes but it is not being used for any other purpose. The variable
is redundant and can be removed.

Cleans up clang scan build warning:
fs/vboxsf/utils.c:443:9: warning: variable 'out_len' set but not
used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240229225138.351909-1-colin.i.king@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

net: bcmgenet: Reset RBUF on first open

If the RBUF logic is not reset when the kernel starts then there
may be some data left over from any network boot loader. If the
64-byte packet headers are enabled then this can be fatal.

Extend bcmgenet_dma_disable to do perform the reset, but not when
called from bcmgenet_resume in order to preserve a wake packet.

N.B. This different handling of resume is just based on a hunch -
why else wouldn't one reset the RBUF as well as the TBUF? If this
isn't the case then it's easy to change the patch to make the RBUF
reset unconditional.

See: https://github.com/raspberrypi/linux/issues/3850
See: https://github.com/raspberrypi/firmware/issues/1882

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Maarten Vanraes <maarten@rmail.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-af: Add array index check

In rvu_map_cgx_lmac_pf() the 'iter', which is used as an array index, can reach
value (up to 14) that exceed the size (MAX_LMAC_COUNT = 8) of the array.
Fix this bug by adding 'iter' value check.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 91c6945ea1f9 ("octeontx2-af: cn10k: Add RPM MAC support")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'selinux-pr-20240402' of git://git./linux/kernel/git/pcmoore/selinux

Pull selinux fix from Paul Moore:
"A single patch for SELinux to fix a problem where we could potentially
  dereference an error pointer if we failed to successfully mount
  selinuxfs"

* tag 'selinux-pr-20240402' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: avoid dereference of garbage after mount failure

MAINTAINERS: mlx5: Add Tariq Toukan

Add myself as mlx5 core and EN maintainer.

Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20240401184347.53884-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: Fix infinite recursion in fib6_dump_done().

syzkaller reported infinite recursive calls of fib6_dump_done() during
netlink socket destruction.  [1]

From the log, syzkaller sent an AF_UNSPEC RTM_GETROUTE message, and then
the response was generated.  The following recvmmsg() resumed the dump
for IPv6, but the first call of inet6_dump_fib() failed at kzalloc() due
to the fault injection.  [0]

  12:01:34 executing program 3:
  r0 = socket$nl_route(0x10, 0x3, 0x0)
  sendmsg$nl_route(r0, ... snip ...)
  recvmmsg(r0, ... snip ...) (fail_nth: 8)

Here, fib6_dump_done() was set to nlk_sk(sk)->cb.done, and the next call
of inet6_dump_fib() set it to nlk_sk(sk)->cb.args[3].  syzkaller stopped
receiving the response halfway through, and finally netlink_sock_destruct()
called nlk_sk(sk)->cb.done().

fib6_dump_done() calls fib6_dump_end() and nlk_sk(sk)->cb.done() if it
is still not NULL.  fib6_dump_end() rewrites nlk_sk(sk)->cb.done() by
nlk_sk(sk)->cb.args[3], but it has the same function, not NULL, calling
itself recursively and hitting the stack guard page.

To avoid the issue, let's set the destructor after kzalloc().

[0]:
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
CPU: 1 PID: 432110 Comm: syz-executor.3 Not tainted 6.8.0-12821-g537c2e91d354-dirty #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:117)
should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153)
should_failslab (mm/slub.c:3733)
kmalloc_trace (mm/slub.c:3748 mm/slub.c:3827 mm/slub.c:3992)
inet6_dump_fib (./include/linux/slab.h:628 ./include/linux/slab.h:749 net/ipv6/ip6_fib.c:662)
rtnl_dump_all (net/core/rtnetlink.c:4029)
netlink_dump (net/netlink/af_netlink.c:2269)
netlink_recvmsg (net/netlink/af_netlink.c:1988)
____sys_recvmsg (net/socket.c:1046 net/socket.c:2801)
___sys_recvmsg (net/socket.c:2846)
do_recvmmsg (net/socket.c:2943)
__x64_sys_recvmmsg (net/socket.c:3041 net/socket.c:3034 net/socket.c:3034)

[1]:
BUG: TASK stack guard page was hit at 00000000f2fa9af1 (stack is 00000000b7912430..000000009a436beb)
stack guard page: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 223719 Comm: kworker/1:3 Not tainted 6.8.0-12821-g537c2e91d354-dirty #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: events netlink_sock_destruct_work
RIP: 0010:fib6_dump_done (net/ipv6/ip6_fib.c:570)
Code: 3c 24 e8 f3 e9 51 fd e9 28 fd ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 41 57 41 56 41 55 41 54 55 48 89 fd <53> 48 8d 5d 60 e8 b6 4d 07 fd 48 89 da 48 b8 00 00 00 00 00 fc ff
RSP: 0018:ffffc9000d980000 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffffffff84405990 RCX: ffffffff844059d3
RDX: ffff8881028e0000 RSI: ffffffff84405ac2 RDI: ffff88810c02f358
RBP: ffff88810c02f358 R08: 0000000000000007 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000224 R12: 0000000000000000
R13: ffff888007c82c78 R14: ffff888007c82c68 R15: ffff888007c82c68
FS:  0000000000000000(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc9000d97fff8 CR3: 0000000102309002 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<#DF>
</#DF>
<TASK>
fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1))
fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1))
...
fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1))
fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1))
netlink_sock_destruct (net/netlink/af_netlink.c:401)
__sk_destruct (net/core/sock.c:2177 (discriminator 2))
sk_destruct (net/core/sock.c:2224)
__sk_free (net/core/sock.c:2235)
sk_free (net/core/sock.c:2246)
process_one_work (kernel/workqueue.c:3259)
worker_thread (kernel/workqueue.c:3329 kernel/workqueue.c:3416)
kthread (kernel/kthread.c:388)
ret_from_fork (arch/x86/kernel/process.c:153)
ret_from_fork_asm (arch/x86/entry/entry_64.S:256)
Modules linked in:

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240401211003.25274-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

r8169: fix issue caused by buggy BIOS on certain boards with RTL8168d

On some boards with this chip version the BIOS is buggy and misses
to reset the PHY page selector. This results in the PHY ID read
accessing registers on a different page, returning a more or
less random value. Fix this by resetting the page selector first.

Fixes: f1e911d5d0df ("r8169: add basic phylib support")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/64f2055e-98b8-45ec-8568-665e3d54d4e6@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vsock/virtio: fix packet delivery to tap device

Commit 82dfb540aeb2 ("VSOCK: Add virtio vsock vsockmon hooks") added
virtio_transport_deliver_tap_pkt() for handing packets to the
vsockmon device. However, in virtio_transport_send_pkt_work(),
the function is called before actually sending the packet (i.e.
before placing it in the virtqueue with virtqueue_add_sgs() and checking
whether it returned successfully).
Queuing the packet in the virtqueue can fail even multiple times.
However, in virtio_transport_deliver_tap_pkt() we deliver the packet
to the monitoring tap interface only the first time we call it.
This certainly avoids seeing the same packet replicated multiple times
in the monitoring interface, but it can show the packet sent with the
wrong timestamp or even before we succeed to queue it in the virtqueue.

Move virtio_transport_deliver_tap_pkt() after calling virtqueue_add_sgs()
and making sure it returned successfully.

Fixes: 82dfb540aeb2 ("VSOCK: Add virtio vsock vsockmon hooks")
Cc: stable@vge.kernel.org
Signed-off-by: Marco Pinna <marco.pinn95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20240329161259.411751-1-marco.pinn95@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ax25: fix use-after-free bugs caused by ax25_ds_del_timer

When the ax25 device is detaching, the ax25_dev_device_down()
calls ax25_ds_del_timer() to cleanup the slave_timer. When
the timer handler is running, the ax25_ds_del_timer() that
calls del_timer() in it will return directly. As a result,
the use-after-free bugs could happen, one of the scenarios
is shown below:

      (Thread 1)          |      (Thread 2)
                          | ax25_ds_timeout()
ax25_dev_device_down()    |
  ax25_ds_del_timer()     |
    del_timer()           |
  ax25_dev_put() //FREE   |
                          |  ax25_dev-> //USE

In order to mitigate bugs, when the device is detaching, use
timer_shutdown_sync() to stop the timer.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240329015023.9223-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bcachefs: ratelimit informational fsck errors

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Check for bad needs_discard before doing discard

In the discard worker, we were failing to validate the bucket state -
meaning a corrupt needs_discard btree could cause us to discard a bucket
that we shouldn't.

If check_alloc_info hasn't run yet we just want to bail out, otherwise
it's a filesystem inconsistent error.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs: Improve bch2_btree_update_to_text()

Print out the mode as a string, and also print out the btree and
watermark.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Merge tag 'docs-6.9-fixes' of git://git.lwn.net/linux

Pull documentation fixes from Jonathan Corbet:
"Four small documentation fixes"

* tag 'docs-6.9-fixes' of git://git.lwn.net/linux:
  docs: zswap: fix shell command format
  tracing: Fix documentation on tp_printk cmdline option
  docs: Fix bitfield handling in kernel-doc
  Documentation: dev-tools: Add link to RV docs

Merge tag 'bcachefs-2024-04-01' of https://evilpiepirate.org/git/bcachefs

Pull bcachefs fixes from Kent Overstreet:
"Lots of fixes for situations with extreme filesystem damage.

  One fix ("Fix journal pins in btree write buffer") applicable to
  normal usage; also a dio performance fix.

  New repair/construction code is in the final stages, should be ready
  in about a week. Anyone that lost btree interior nodes (or a variety
  of other damage) as a result of the splitbrain bug will be able to
  repair then"

* tag 'bcachefs-2024-04-01' of https://evilpiepirate.org/git/bcachefs: (32 commits)
  bcachefs: On emergency shutdown, print out current journal sequence number
  bcachefs: Fix overlapping extent repair
  bcachefs: Fix remove_dirent()
  bcachefs: Logged op errors should be ignored
  bcachefs: Improve -o norecovery; opts.recovery_pass_limit
  bcachefs: bch2_run_explicit_recovery_pass_persistent()
  bcachefs: Ensure bch_sb_field_ext always exists
  bcachefs: Flush journal immediately after replay if we did early repair
  bcachefs: Resume logged ops after fsck
  bcachefs: Add error messages to logged ops fns
  bcachefs: Split out recovery_passes.c
  bcachefs: fix backpointer for missing alloc key msg
  bcachefs: Fix bch2_btree_increase_depth()
  bcachefs: Kill bch2_bkey_ptr_data_type()
  bcachefs: Fix use after free in check_root_trans()
  bcachefs: Fix repair path for missing indirect extents
  bcachefs: Fix use after free in bch2_check_fix_ptrs()
  bcachefs: Fix btree node keys accounting in topology repair path
  bcachefs: Check btree ptr min_key in .invalid
  bcachefs: add REQ_SYNC and REQ_IDLE in write dio
  ...

mean_and_variance: Drop always failing tests

mean_and_variance_test_2 and mean_and_variance_test_4 always fail.
The input parameters to those tests are identical to the input parameters
to tests 1 and 3, yet the expected result for tests 2 and 4 is different
for the mean and stddev tests. That will always fail.

     Expected mean_and_variance_get_mean(mv) == mean[i], but
        mean_and_variance_get_mean(mv) == 22 (0x16)
        mean[i] == 10 (0xa)

Drop the bad tests.

Fixes: 65bc41090720 ("mean and variance: More tests")
Closes: https://lore.kernel.org/lkml/065b94eb-6a24-4248-b7d7-d3212efb4787@roeck-us.net/
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>