tests: remove unused destructive/p11-kit-load.sh

This file is replaced with tests/p11-kit-load.sh and
tests/pkcs11/list-tokens.c.

Signed-off-by: Daiki Ueno <dueno@redhat.com>

diff --git a/tests/destructive/p11-kit-load.sh b/tests/destructive/p11-kit-load.sh
deleted file mode 100644 (file)
index c6a3818..0000000
--- a/tests/destructive/p11-kit-load.sh
+++ /dev/null
@@ -1,185 +0,0 @@
-#!/bin/sh
-
-# Copyright (C) 2017 Red Hat, Inc.
-#
-# This file is part of p11-kit.
-#
-# p11-kit is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by the
-# Free Software Foundation; either version 3 of the License, or (at
-# your option) any later version.
-#
-# p11-kit is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>
-
-#set -e
-
-srcdir="${srcdir:-.}"
-builddir="${builddir:-.}"
-P11TOOL="${P11TOOL:-../src/p11tool${EXEEXT}}"
-CERTTOOL="${CERTTOOL:-../src/certtool${EXEEXT}}"
-DIFF="${DIFF:-diff}"
-PKGCONFIG="${PKG_CONFIG:-$(which pkg-config)}"
-TMP_SOFTHSM_DIR="./softhsm-load.$$.tmp"
-P11DIR="p11-kit-conf.$$.tmp"
-PIN=1234
-PUK=1234
-
-for lib in ${libdir} ${libdir}/pkcs11 /usr/lib64/pkcs11/ /usr/lib/pkcs11/ /usr/lib/x86_64-linux-gnu/pkcs11/;do
-       if test -f "${lib}/p11-kit-trust.so"; then
-               TRUST_MODULE="${lib}/p11-kit-trust.so"
-               echo "located ${MODULE}"
-               break
-       fi
-done
-
-for lib in ${libdir} ${libdir}/pkcs11 /usr/lib64/pkcs11/ /usr/lib/pkcs11/ /usr/lib/x86_64-linux-gnu/pkcs11/ /usr/lib/softhsm/;do
-       if test -f "${lib}/libsofthsm2.so"; then
-               SOFTHSM_MODULE="${lib}/libsofthsm2.so"
-               echo "located ${MODULE}"
-               break
-       fi
-done
-
-${PKGCONFIG} --version >/dev/null || exit 77
-
-if ! test -x "${P11TOOL}"; then
-       echo "p11tool was not found"
-       exit 77
-fi
-
-if ! test -f "${TRUST_MODULE}"; then
-       echo "p11-kit trust module was not found"
-       exit 77
-fi
-
-if ! test -f "${SOFTHSM_MODULE}"; then
-       echo "softhsm module was not found"
-       exit 77
-fi
-
-# Create pkcs11.conf with two modules, a trusted (p11-kit-trust)
-# and softhsm (not trusted)
-mkdir -p ${P11DIR}
-
-cat <<_EOF_ >${P11DIR}/p11-kit-trust.module
-module: p11-kit-trust.so
-trust-policy: yes
-_EOF_
-
-cat <<_EOF_ >${P11DIR}/softhsm.module
-module: libsofthsm2.so
-_EOF_
-
-# Setup softhsm
-rm -rf ${TMP_SOFTHSM_DIR}
-mkdir -p ${TMP_SOFTHSM_DIR}
-SOFTHSM2_CONF=${TMP_SOFTHSM_DIR}/conf
-export SOFTHSM2_CONF
-echo "objectstore.backend = file" > "${SOFTHSM2_CONF}"
-echo "directories.tokendir = ${TMP_SOFTHSM_DIR}" >> "${SOFTHSM2_CONF}"
-
-softhsm2-util --init-token --slot 0 --label "GnuTLS-Test" --so-pin "${PUK}" --pin "${PIN}" >/dev/null #2>&1
-if test $? != 0; then
-       echo "failed to initialize softhsm"
-       exit 1
-fi
-
-FILTERTOKEN="sed s/token=.*//g"
-
-# Check whether both are listed
-
-nr=$(${builddir}/pkcs11/list-tokens -o ${P11DIR} -a|${FILTERTOKEN}|sort -u|wc -l)
-#nr=$(${P11TOOL} --list-tokens|grep 'Module:'|sort -u|wc -l)
-if test "$nr" != 2;then
-       echo "Error: did not find 2 modules ($nr)"
-       ${builddir}/pkcs11/list-tokens -o ${P11DIR}
-       exit 1
-fi
-
-## Check whether p11tool with a specific provider would list only that
-## That is, check whether p11tool will list the trust module
-## if we only load softhsm (it should as trust modules
-## are always loaded).ould list them both
-
-
-#nr=$(${P11TOOL} --provider "${SOFTHSM_MODULE}" --list-tokens|grep -c ^Token)
-nr=$(${builddir}/pkcs11/list-tokens -o ${P11DIR} -m -s "${SOFTHSM_MODULE}"|${FILTERTOKEN}|sort -u|wc -l)
-if test "$nr" != 1;then
-       echo "Error: did not find softhsm modules"
-       ${builddir}/pkcs11/list-tokens -o ${P11DIR} -m -s "${SOFTHSM_MODULE}"
-       exit 1
-fi
-
-# Check whether both modules are found when gnutls_pkcs11_init
-# is not called but a pkcs11 operation is called.
-nr=$(${builddir}/pkcs11/list-tokens -o ${P11DIR} -d|${FILTERTOKEN}|sort -u|wc -l)
-if test "$nr" != 2;then
-       echo "Error in test 1: did not find 2 modules"
-       ${builddir}/pkcs11/list-tokens -o ${P11DIR} -d
-       exit 1
-fi
-
-# Check whether both modules are found when gnutls_pkcs11_init 
-# is called with the auto flag
-nr=$(${builddir}/pkcs11/list-tokens -o ${P11DIR} -a|${FILTERTOKEN}|sort -u|wc -l)
-if test "$nr" != 2;then
-       echo "Error in test 2: did not find 2 modules"
-       ${builddir}/pkcs11/list-tokens -o ${P11DIR} -a
-       exit 1
-fi
-
-# Check whether only trusted modules are listed when the
-# trusted flag is given to gnutls_pkcs11_init().
-nr=$(${builddir}/pkcs11/list-tokens -o ${P11DIR} -t|${FILTERTOKEN}|sort -u|wc -l)
-if test "$nr" != 1;then
-       echo "Error in test 3: did not find the trusted module"
-       ${builddir}/pkcs11/list-tokens -o ${P11DIR} -t
-       exit 1
-fi
-
-# Check whether only trusted is listed after certificate verification
-# is performed.
-nr=$(${builddir}/pkcs11/list-tokens -o ${P11DIR} -v|${FILTERTOKEN}|sort -u|wc -l)
-if test "$nr" != 1;then
-       echo "Error in test 4: did not find 1 module"
-       echo xxx
-       GNUTLS_DEBUG_LEVEL=4 P11_KIT_DEBUG=all ${builddir}/pkcs11/list-tokens -o ${P11DIR} -v
-       exit 1
-fi
-
-# Check whether only trusted is listed when gnutls_pkcs11_init
-# is called with manual flag and a certificate verification is performed.
-nr=$(${builddir}/pkcs11/list-tokens -o ${P11DIR} -m -v|${FILTERTOKEN}|sort -u|wc -l)
-if test "$nr" != 1;then
-       echo "Error in test 5: did not find 1 module"
-       ${builddir}/pkcs11/list-tokens -o ${P11DIR} -m -v
-       exit 1
-fi
-
-# Check whether all modules are listed after certificate verification
-# is performed then a PKCS#11 function is called.
-nr=$(${builddir}/pkcs11/list-tokens -o ${P11DIR} -v -d|${FILTERTOKEN}|sort -u|wc -l)
-if test "$nr" != 2;then
-       echo "Error in test 6: did not find all modules"
-       ${builddir}/pkcs11/list-tokens -o ${P11DIR} -v -d
-       exit 1
-fi
-
-# Check whether all modules are listed after a private key operation.
-nr=$(${builddir}/pkcs11/list-tokens -o ${P11DIR} -p|${FILTERTOKEN}|sort -u|wc -l)
-if test "$nr" != 2;then
-       echo "Error in test 7: did not find all modules"
-       ${builddir}/pkcs11/list-tokens -o ${P11DIR} -p
-       exit 1
-fi
-
-rm -f ${P11DIR}/*
-rm -rf ${TMP_SOFTHSM_DIR}
-
-exit 0