2 Unix SMB/CIFS implementation.
3 SMB parameters and setup, plus a whole lot more.
5 Copyright (C) Andrew Tridgell 1992-2000
6 Copyright (C) John H Terpstra 1996-2002
7 Copyright (C) Luke Kenneth Casson Leighton 1996-2000
8 Copyright (C) Paul Ashton 1998-2000
9 Copyright (C) Simo Sorce 2001-2002
10 Copyright (C) Martin Pool 2002
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
30 /* logged when starting the various Samba daemons */
31 #define COPYRIGHT_STARTUP_MESSAGE "Copyright Andrew Tridgell and the Samba Team 1992-2007"
34 #if defined(LARGE_SMB_OFF_T)
35 #define BUFFER_SIZE (128*1024)
36 #else /* no large readwrite possible */
37 #define BUFFER_SIZE (0xFFFF)
40 #define SAFETY_MARGIN 1024
41 #define LARGE_WRITEX_HDR_SIZE 65
44 #define DGRAM_PORT 138
47 #define SMB_PORTS "445 139"
49 #define Undefined (-1)
57 #ifndef DEF_CREATE_MASK
58 #define DEF_CREATE_MASK (0755)
61 /* string manipulation flags - see clistr.c and srvstr.c */
62 #define STR_TERMINATE 1
66 #define STR_NOALIGN 16
67 #define STR_TERMINATE_ASCII 128
69 /* how long to wait for secondary SMB packets (milli-seconds) */
70 #define SMB_SECONDARY_WAIT (60*1000)
75 /* this defines the error codes that receive_smb can put in smb_read_error */
76 #define READ_TIMEOUT 1
79 #define WRITE_ERROR 4 /* This error code can go into the client smb_rw_error. */
80 #define READ_BAD_SIG 5
81 #define DO_NOT_DO_TDIS 6 /* cli_close_connection() check for this when smbfs wants to keep tree connected */
83 #define DIR_STRUCT_SIZE 43
85 /* these define the attribute byte as seen by DOS */
86 #define aRONLY (1L<<0) /* 0x01 */
87 #define aHIDDEN (1L<<1) /* 0x02 */
88 #define aSYSTEM (1L<<2) /* 0x04 */
89 #define aVOLID (1L<<3) /* 0x08 */
90 #define aDIR (1L<<4) /* 0x10 */
91 #define aARCH (1L<<5) /* 0x20 */
102 #define DOS_OPEN_RDONLY 0
103 #define DOS_OPEN_WRONLY 1
104 #define DOS_OPEN_RDWR 2
105 #define DOS_OPEN_EXEC 3
106 #define DOS_OPEN_FCB 0xF
108 /* define shifts and masks for share and open modes. */
109 #define OPENX_MODE_MASK 0xF
110 #define DENY_MODE_SHIFT 4
111 #define DENY_MODE_MASK 0x7
112 #define GET_OPENX_MODE(x) ((x) & OPENX_MODE_MASK)
113 #define SET_OPENX_MODE(x) ((x) & OPENX_MODE_MASK)
114 #define GET_DENY_MODE(x) (((x)>>DENY_MODE_SHIFT) & DENY_MODE_MASK)
115 #define SET_DENY_MODE(x) (((x) & DENY_MODE_MASK) <<DENY_MODE_SHIFT)
117 /* Sync on open file (not sure if used anymore... ?) */
118 #define FILE_SYNC_OPENMODE (1<<14)
119 #define GET_FILE_SYNC_OPENMODE(x) (((x) & FILE_SYNC_OPENMODE) ? True : False)
121 /* open disposition values */
122 #define OPENX_FILE_EXISTS_FAIL 0
123 #define OPENX_FILE_EXISTS_OPEN 1
124 #define OPENX_FILE_EXISTS_TRUNCATE 2
126 /* mask for open disposition. */
127 #define OPENX_FILE_OPEN_MASK 0x3
129 #define GET_FILE_OPENX_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
130 #define SET_FILE_OPENX_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
132 /* The above can be OR'ed with... */
133 #define OPENX_FILE_CREATE_IF_NOT_EXIST 0x10
134 #define OPENX_FILE_FAIL_IF_NOT_EXIST 0
138 typedef union unid_t {
144 * SMB UCS2 (16-bit unicode) internal type.
145 * smb_ucs2_t is *always* in little endian format.
148 typedef uint16 smb_ucs2_t;
150 /* ucs2 string types. */
151 typedef smb_ucs2_t wpstring[PSTRING_LEN];
152 typedef smb_ucs2_t wfstring[FSTRING_LEN];
154 #ifdef WORDS_BIGENDIAN
160 /* turn a 7 bit character into a ucs2 character */
161 #define UCS2_CHAR(c) ((c) << UCS2_SHIFT)
163 /* return an ascii version of a ucs2 character */
164 #define UCS2_TO_CHAR(c) (((c) >> UCS2_SHIFT) & 0xff)
166 /* Copy into a smb_ucs2_t from a possibly unaligned buffer. Return the copied smb_ucs2_t */
167 #define COPY_UCS2_CHAR(dest,src) (((unsigned char *)(dest))[0] = ((unsigned char *)(src))[0],\
168 ((unsigned char *)(dest))[1] = ((unsigned char *)(src))[1], (dest))
170 /* Large data type for manipulating uint32 unicode codepoints */
171 typedef uint32 codepoint_t;
172 #define INVALID_CODEPOINT ((codepoint_t)-1)
174 /* pipe string names */
175 #define PIPE_LANMAN "\\PIPE\\LANMAN"
176 #define PIPE_SRVSVC "\\PIPE\\srvsvc"
177 #define PIPE_SAMR "\\PIPE\\samr"
178 #define PIPE_WINREG "\\PIPE\\winreg"
179 #define PIPE_WKSSVC "\\PIPE\\wkssvc"
180 #define PIPE_NETLOGON "\\PIPE\\NETLOGON"
181 #define PIPE_NTLSA "\\PIPE\\ntlsa"
182 #define PIPE_NTSVCS "\\PIPE\\ntsvcs"
183 #define PIPE_LSASS "\\PIPE\\lsass"
184 #define PIPE_LSARPC "\\PIPE\\lsarpc"
185 #define PIPE_SPOOLSS "\\PIPE\\spoolss"
186 #define PIPE_NETDFS "\\PIPE\\netdfs"
187 #define PIPE_ECHO "\\PIPE\\rpcecho"
188 #define PIPE_SHUTDOWN "\\PIPE\\initshutdown"
189 #define PIPE_EPM "\\PIPE\\epmapper"
190 #define PIPE_SVCCTL "\\PIPE\\svcctl"
191 #define PIPE_EVENTLOG "\\PIPE\\eventlog"
192 #define PIPE_UNIXINFO "\\PIPE\\unixinfo"
194 #define PIPE_NETLOGON_PLAIN "\\NETLOGON"
197 #define PI_LSARPC_DS 1
199 #define PI_NETLOGON 3
206 #define PI_INITSHUTDOWN 10
208 #define PI_EVENTLOG 12
209 #define PI_UNIXINFO 13
211 #define PI_MAX_PIPES 15
213 /* 64 bit time (100usec) since ????? - cifs6.txt, section 3.5, page 30 */
214 typedef uint64_t NTTIME;
217 /* Allowable account control bits */
218 #define ACB_DISABLED 0x00000001 /* 1 = User account disabled */
219 #define ACB_HOMDIRREQ 0x00000002 /* 1 = Home directory required */
220 #define ACB_PWNOTREQ 0x00000004 /* 1 = User password not required */
221 #define ACB_TEMPDUP 0x00000008 /* 1 = Temporary duplicate account */
222 #define ACB_NORMAL 0x00000010 /* 1 = Normal user account */
223 #define ACB_MNS 0x00000020 /* 1 = MNS logon user account */
224 #define ACB_DOMTRUST 0x00000040 /* 1 = Interdomain trust account */
225 #define ACB_WSTRUST 0x00000080 /* 1 = Workstation trust account */
226 #define ACB_SVRTRUST 0x00000100 /* 1 = Server trust account (BDC) */
227 #define ACB_PWNOEXP 0x00000200 /* 1 = User password does not expire */
228 #define ACB_AUTOLOCK 0x00000400 /* 1 = Account auto locked */
230 /* only valid for > Windows 2000 */
231 #define ACB_ENC_TXT_PWD_ALLOWED 0x00000800 /* 1 = Text password encryped */
232 #define ACB_SMARTCARD_REQUIRED 0x00001000 /* 1 = Smart Card required */
233 #define ACB_TRUSTED_FOR_DELEGATION 0x00002000 /* 1 = Trusted for Delegation */
234 #define ACB_NOT_DELEGATED 0x00004000 /* 1 = Not delegated */
235 #define ACB_USE_DES_KEY_ONLY 0x00008000 /* 1 = Use DES key only */
236 #define ACB_DONT_REQUIRE_PREAUTH 0x00010000 /* 1 = Preauth not required */
237 #define ACB_PWEXPIRED 0x00020000 /* 1 = Password is expired */
238 #define ACB_NO_AUTH_DATA_REQD 0x00080000 /* 1 = No authorization data required */
240 #define MAX_HOURS_LEN 32
243 #define MAXSUBAUTHS 15 /* max sub authorities in a SID */
246 #define SID_MAX_SIZE ((size_t)(8+(MAXSUBAUTHS*4)))
248 #define LOOKUP_NAME_ISOLATED 1 /* Look up unqualified names */
249 #define LOOKUP_NAME_REMOTE 2 /* Ask others */
250 #define LOOKUP_NAME_ALL (LOOKUP_NAME_ISOLATED|LOOKUP_NAME_REMOTE)
252 #define LOOKUP_NAME_GROUP 4 /* (unused) This is a NASTY hack for valid users = @foo
253 * where foo also exists in as user. */
256 * @brief Security Identifier
258 * @sa http://msdn.microsoft.com/library/default.asp?url=/library/en-us/security/accctrl_38yn.asp
260 typedef struct dom_sid {
261 uint8 sid_rev_num; /**< SID revision number */
262 uint8 num_auths; /**< Number of sub-authorities */
263 uint8 id_auth[6]; /**< Identifier Authority */
265 * Pointer to sub-authorities.
267 * @note The values in these uint32's are in *native* byteorder, not
268 * neccessarily little-endian...... JRA.
270 uint32 sub_auths[MAXSUBAUTHS];
273 #define dom_sid2 dom_sid
274 #define dom_sid28 dom_sid
295 enum id_mapping status;
298 #include "librpc/ndr/misc.h"
299 #include "librpc/ndr/security.h"
300 #include "librpc/ndr/libndr.h"
301 #include "librpc/gen_ndr/unixinfo.h"
302 #include "librpc/gen_ndr/lsa.h"
303 #include "librpc/gen_ndr/dfs.h"
304 #include "librpc/gen_ndr/initshutdown.h"
305 #include "librpc/gen_ndr/winreg.h"
306 #include "librpc/gen_ndr/eventlog.h"
307 #include "librpc/gen_ndr/srvsvc.h"
308 #include "librpc/gen_ndr/wkssvc.h"
310 struct lsa_dom_info {
318 struct lsa_name_info {
320 enum lsa_SidType type;
325 /* Some well-known SIDs */
326 extern const DOM_SID global_sid_World_Domain;
327 extern const DOM_SID global_sid_World;
328 extern const DOM_SID global_sid_Creator_Owner_Domain;
329 extern const DOM_SID global_sid_NT_Authority;
330 extern const DOM_SID global_sid_System;
331 extern const DOM_SID global_sid_NULL;
332 extern const DOM_SID global_sid_Authenticated_Users;
333 extern const DOM_SID global_sid_Network;
334 extern const DOM_SID global_sid_Creator_Owner;
335 extern const DOM_SID global_sid_Creator_Group;
336 extern const DOM_SID global_sid_Anonymous;
337 extern const DOM_SID global_sid_Builtin;
338 extern const DOM_SID global_sid_Builtin_Administrators;
339 extern const DOM_SID global_sid_Builtin_Users;
340 extern const DOM_SID global_sid_Builtin_Guests;
341 extern const DOM_SID global_sid_Builtin_Power_Users;
342 extern const DOM_SID global_sid_Builtin_Account_Operators;
343 extern const DOM_SID global_sid_Builtin_Server_Operators;
344 extern const DOM_SID global_sid_Builtin_Print_Operators;
345 extern const DOM_SID global_sid_Builtin_Backup_Operators;
346 extern const DOM_SID global_sid_Builtin_Replicator;
347 extern const DOM_SID global_sid_Builtin_PreWin2kAccess;
348 extern const DOM_SID global_sid_Unix_Users;
349 extern const DOM_SID global_sid_Unix_Groups;
352 * The complete list of SIDS belonging to this user.
353 * Created when a vuid is registered.
354 * The definition of the user_sids array is as follows :
356 * token->user_sids[0] = primary user SID.
357 * token->user_sids[1] = primary group SID.
358 * token->user_sids[2..num_sids] = supplementary group SIDS.
361 #define PRIMARY_USER_SID_INDEX 0
362 #define PRIMARY_GROUP_SID_INDEX 1
364 typedef struct nt_user_token {
370 typedef struct _unix_token {
377 /* 32 bit time (sec) since 01jan1970 - cifs6.txt, section 3.5, page 30 */
378 typedef struct time_info {
382 /* Structure used when SMBwritebmpx is active */
384 size_t wr_total_written; /* So we know when to discard this */
386 int32 wr_errclass; /* Cached errors */
387 int32 wr_error; /* Cached errors */
388 NTSTATUS wr_status; /* Cached errors */
389 BOOL wr_mode; /* write through mode) */
390 BOOL wr_discard; /* discard all further data */
393 typedef struct write_cache {
402 smb_ucs2_t *origname;
403 smb_ucs2_t *filename;
404 SMB_STRUCT_STAT *statinfo;
407 #include "fake_file.h"
412 SMB_BIG_UINT position_information;
414 uint32 private_options; /* NT Create options, but we only look at
415 * NTCREATEX_OPTIONS_PRIVATE_DENY_DOS and
416 * NTCREATEX_OPTIONS_PRIVATE_DENY_FCB (Except
417 * for print files *only*, where
418 * DELETE_ON_CLOSE is not stored in the share
421 unsigned long file_id;
424 struct messaging_context;
425 struct event_context;
429 struct share_mode_entry;
432 struct vfs_fsp_data {
433 struct vfs_fsp_data *next;
434 struct vfs_handle_struct *owner;
435 /* NOTE: This structure contains two pointers so that we can guarantee
436 * that the end of the structure is always both 4-byte and 8-byte aligned.
440 /* the basic packet size, assuming no words or bytes */
443 struct notify_change {
448 struct notify_mid_map;
449 struct sys_notify_backend;
450 struct sys_notify_context {
451 struct event_context *ev;
455 struct notify_change_request {
456 struct notify_change_request *prev, *next;
457 struct files_struct *fsp; /* backpointer for cancel by mid */
458 char request_buf[smb_size];
460 uint32 max_param_count;
461 struct notify_mid_map *mid_map;
465 struct notify_change_buf {
467 * If no requests are pending, changes are queued here. Simple array,
472 * num_changes == -1 means that we have got a catch-all change, when
473 * asked we just return NT_STATUS_OK without specific changes.
476 struct notify_change *changes;
479 * If no changes are around requests are queued here. Using a linked
480 * list, because we have to append at the end and delete from the top.
482 struct notify_change_request *requests;
485 typedef struct files_struct {
486 struct files_struct *next, *prev;
488 struct connection_struct *conn;
489 struct fd_handle *fh;
490 unsigned int num_smb_operations;
491 uint16 rap_print_jobid;
494 SMB_BIG_UINT initial_allocation_size; /* Faked up initial allocation on disk. */
498 write_bmpx_struct *wbmpx_ptr;
500 struct timeval open_time;
501 uint32 access_mask; /* NTCreateX access bits (FILE_READ_DATA etc.) */
502 uint32 share_access; /* NTCreateX share constants (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE). */
503 BOOL pending_modtime_owner;
504 time_t pending_modtime;
505 time_t last_write_time;
507 int sent_oplock_break;
508 struct timed_event *oplock_timeout;
509 struct lock_struct last_lock_failure;
511 struct share_mode_entry *pending_break_messages;
512 int num_pending_break_messages;
521 BOOL aio_write_behind;
523 BOOL initial_delete_on_close; /* Only set at NTCreateX if file was created. */
526 struct vfs_fsp_data *vfs_extension;
527 FAKE_FILE_HANDLE *fake_file_handle;
529 struct notify_change_buf *notify;
532 #include "ntquotas.h"
533 #include "sysquotas.h"
535 /* used to hold an arbitrary blob of data */
536 typedef struct data_blob_ {
539 void (*free)(struct data_blob_ *data_blob);
543 * Structure used to keep directory state information around.
544 * Used in NT change-notify code.
552 struct vuid_cache_entry {
559 unsigned int entries;
560 struct vuid_cache_entry array[VUID_CACHE_SIZE];
566 } name_compare_entry;
569 struct trans_state *next, *prev;
573 uint32 max_param_return;
574 uint32 max_data_return;
575 uint32 max_setup_return;
577 uint8 cmd; /* SMBtrans or SMBtrans2 */
579 fstring name; /* for trans requests */
580 uint16 call; /* for trans2 and nttrans requests */
582 BOOL close_on_completion;
585 unsigned int setup_count;
588 size_t received_data;
589 size_t received_param;
598 /* Include VFS stuff */
600 #include "smb_acls.h"
603 struct dfree_cached_info {
604 time_t last_dfree_time;
605 SMB_BIG_UINT dfree_ret;
613 struct share_params {
617 struct share_iterator {
621 typedef struct connection_struct {
622 struct connection_struct *next, *prev;
623 TALLOC_CTX *mem_ctx; /* long-lived memory context for things hanging off this struct. */
624 unsigned cnum; /* an index passed over the wire */
625 struct share_params *params;
628 struct vuid_cache vuid_cache;
629 struct dptr_struct *dirptr;
632 BOOL read_only; /* Attributes for the current user of the share. */
633 BOOL admin_user; /* Attributes for the current user of the share. */
638 struct vfs_ops vfs; /* Filesystem operations */
639 struct vfs_ops vfs_opaque; /* OPAQUE Filesystem operations */
640 struct vfs_handle_struct *vfs_handles; /* for the new plugins */
642 char *user; /* name of user who *opened* this connection */
643 uid_t uid; /* uid of user who *opened* this connection */
644 gid_t gid; /* gid of user who *opened* this connection */
645 char client_address[18]; /* String version of client IP address. */
647 uint16 vuid; /* vuid of user who *opened* this connection, or UID_FIELD_INVALID */
649 /* following groups stuff added by ih */
651 /* This groups info is valid for the user that *opened* the connection */
654 NT_USER_TOKEN *nt_user_token;
657 time_t lastused_count;
660 unsigned int num_smb_operations; /* Count of smb operations on this tree. */
664 BOOL short_case_preserve;
666 name_compare_entry *hide_list; /* Per-share list of files to return as hidden. */
667 name_compare_entry *veto_list; /* Per-share list of files to veto (never show). */
668 name_compare_entry *veto_oplock_list; /* Per-share list of files to refuse oplocks on. */
669 name_compare_entry *aio_write_behind_list; /* Per-share list of files to use aio write behind on. */
670 struct dfree_cached_info *dfree_info;
671 struct trans_state *pending_trans;
674 struct current_user {
675 connection_struct *conn;
678 NT_USER_TOKEN *nt_user_token;
681 /* Defines for the sent_oplock_break field above. */
682 #define NO_BREAK_SENT 0
683 #define BREAK_TO_NONE_SENT 1
684 #define LEVEL_II_BREAK_SENT 2
687 fstring smb_name; /* user name from the client */
688 fstring unix_name; /* unix user name of a validated user */
689 fstring full_name; /* to store full name (such as "Joe Bloggs") from gecos field of password file */
690 fstring domain; /* domain that the client specified */
693 /* Extra fields above "LPQ_PRINTING" are used to map extra NT status codes. */
695 enum {LPQ_QUEUED=0,LPQ_PAUSED,LPQ_SPOOLING,LPQ_PRINTING,LPQ_ERROR,LPQ_DELETING,
696 LPQ_OFFLINE,LPQ_PAPEROUT,LPQ_PRINTED,LPQ_DELETED,LPQ_BLOCKED,LPQ_USER_INTERVENTION};
698 typedef struct _print_queue_struct {
699 int job; /* normally the UNIX jobid -- see note in
700 printing.c:traverse_fn_delete() */
708 } print_queue_struct;
710 enum {LPSTAT_OK, LPSTAT_STOPPED, LPSTAT_ERROR};
716 } print_status_struct;
718 /* used for server information: client, nameserv and ipc */
719 struct server_info_struct {
723 fstring domain; /* used ONLY in ipc.c NOT namework.c */
724 BOOL server_added; /* used ONLY in ipc.c NOT namework.c */
727 /* used for network interfaces */
729 struct interface *next, *prev;
731 struct in_addr bcast;
732 struct in_addr nmask;
735 /* Internal message queue for deferred opens. */
736 struct pending_message_list {
737 struct pending_message_list *next, *prev;
738 struct timeval request_time; /* When was this first issued? */
739 struct timeval end_time; /* When does this time out? */
741 DATA_BLOB private_data;
744 /* struct returned by get_share_modes */
745 struct share_mode_entry {
746 struct process_id pid;
749 uint32 access_mask; /* NTCreateX access bits (FILE_READ_DATA etc.) */
750 uint32 share_access; /* NTCreateX share constants (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE). */
751 uint32 private_options; /* NT Create options, but we only look at
752 * NTCREATEX_OPTIONS_PRIVATE_DENY_DOS and
753 * NTCREATEX_OPTIONS_PRIVATE_DENY_FCB for
754 * smbstatus and swat */
758 unsigned long share_file_id;
759 uint32 uid; /* uid of file opener. */
762 /* oplock break message definition - linearization of share_mode_entry.
765 0 struct process_id pid 4
768 8 uint32 access_mask 4
769 12 uint32 share_access 4
770 16 uint32 private_options 4
772 24 uint32 time usec 4
773 28 SMB_DEV_T dev 8 bytes.
774 36 SMB_INO_T inode 8 bytes
775 44 unsigned long file_id 4 bytes
776 48 uint32 uid 4 bytes
780 #define MSG_SMB_SHARE_MODE_ENTRY_SIZE 52
782 struct share_mode_lock {
783 const char *servicepath; /* canonicalized. */
784 const char *filename;
788 struct share_mode_entry *share_modes;
789 UNIX_USER_TOKEN *delete_token;
790 BOOL delete_on_close;
796 * Internal structure of locking.tdb share mode db.
797 * Used by locking.c and libsmbsharemodes.c
800 struct locking_data {
803 int num_share_mode_entries;
804 BOOL delete_on_close;
805 uint32 delete_token_size; /* Only valid if either of
806 the two previous fields
809 struct share_mode_entry dummy; /* Needed for alignment. */
811 /* The following four entries are implicit
812 struct share_mode_entry modes[num_share_mode_entries];
813 char unix_token[delete_token_size] (divisible by 4).
819 /* Used to store pipe open records for NetFileEnum() */
821 struct pipe_open_rec {
822 struct process_id pid;
829 #define NT_HASH_LEN 16
830 #define LM_HASH_LEN 16
832 /* Password history contants. */
833 #define PW_HISTORY_SALT_LEN 16
834 #define SALTED_MD5_HASH_LEN 16
835 #define PW_HISTORY_ENTRY_LEN (PW_HISTORY_SALT_LEN+SALTED_MD5_HASH_LEN)
836 #define MAX_PW_HISTORY_LEN 24
839 * Flags for account policy.
841 #define AP_MIN_PASSWORD_LEN 1
842 #define AP_PASSWORD_HISTORY 2
843 #define AP_USER_MUST_LOGON_TO_CHG_PASS 3
844 #define AP_MAX_PASSWORD_AGE 4
845 #define AP_MIN_PASSWORD_AGE 5
846 #define AP_LOCK_ACCOUNT_DURATION 6
847 #define AP_RESET_COUNT_TIME 7
848 #define AP_BAD_ATTEMPT_LOCKOUT 8
849 #define AP_TIME_TO_LOGOUT 9
850 #define AP_REFUSE_MACHINE_PW_CHANGE 10
853 * Flags for local user manipulation.
856 #define LOCAL_ADD_USER 0x1
857 #define LOCAL_DELETE_USER 0x2
858 #define LOCAL_DISABLE_USER 0x4
859 #define LOCAL_ENABLE_USER 0x8
860 #define LOCAL_TRUST_ACCOUNT 0x10
861 #define LOCAL_SET_NO_PASSWORD 0x20
862 #define LOCAL_SET_PASSWORD 0x40
863 #define LOCAL_SET_LDAP_ADMIN_PW 0x80
864 #define LOCAL_INTERDOM_ACCOUNT 0x100
865 #define LOCAL_AM_ROOT 0x200 /* Act as root */
867 /* key and data in the connections database - used in smbstatus and smbd */
868 struct connections_key {
869 struct process_id pid;
874 struct connections_data {
876 struct process_id pid;
882 char machine[FSTRING_LEN];
884 uint32 bcast_msg_flags;
888 /* the following are used by loadparm for option lists */
890 P_BOOL,P_BOOLREV,P_CHAR,P_INTEGER,P_OCTAL,P_LIST,
891 P_STRING,P_USTRING,P_GSTRING,P_UGSTRING,P_ENUM,P_SEP
895 P_LOCAL,P_GLOBAL,P_SEPARATOR,P_NONE
908 BOOL (*special)(int snum, const char *, char **);
909 const struct enum_list *enum_list;
920 /* The following flags are used in SWAT */
921 #define FLAG_BASIC 0x0001 /* Display only in BASIC view */
922 #define FLAG_SHARE 0x0002 /* file sharing options */
923 #define FLAG_PRINT 0x0004 /* printing options */
924 #define FLAG_GLOBAL 0x0008 /* local options that should be globally settable in SWAT */
925 #define FLAG_WIZARD 0x0010 /* Parameters that the wizard will operate on */
926 #define FLAG_ADVANCED 0x0020 /* Parameters that will be visible in advanced view */
927 #define FLAG_DEVELOPER 0x0040 /* No longer used */
928 #define FLAG_DEPRECATED 0x1000 /* options that should no longer be used */
929 #define FLAG_HIDE 0x2000 /* options that should be hidden in SWAT */
930 #define FLAG_DOS_STRING 0x4000 /* convert from UNIX to DOS codepage when reading this string. */
937 /* offsets into message for common items */
944 #define smb_pidhigh 16
945 #define smb_ss_field 18
971 /* flag defines. CIFS spec 3.1.1 */
972 #define FLAG_SUPPORT_LOCKREAD 0x01
973 #define FLAG_CLIENT_BUF_AVAIL 0x02
974 #define FLAG_RESERVED 0x04
975 #define FLAG_CASELESS_PATHNAMES 0x08
976 #define FLAG_CANONICAL_PATHNAMES 0x10
977 #define FLAG_REQUEST_OPLOCK 0x20
978 #define FLAG_REQUEST_BATCH_OPLOCK 0x40
979 #define FLAG_REPLY 0x80
982 #define SMBmkdir 0x00 /* create directory */
983 #define SMBrmdir 0x01 /* delete directory */
984 #define SMBopen 0x02 /* open file */
985 #define SMBcreate 0x03 /* create file */
986 #define SMBclose 0x04 /* close file */
987 #define SMBflush 0x05 /* flush file */
988 #define SMBunlink 0x06 /* delete file */
989 #define SMBmv 0x07 /* rename file */
990 #define SMBgetatr 0x08 /* get file attributes */
991 #define SMBsetatr 0x09 /* set file attributes */
992 #define SMBread 0x0A /* read from file */
993 #define SMBwrite 0x0B /* write to file */
994 #define SMBlock 0x0C /* lock byte range */
995 #define SMBunlock 0x0D /* unlock byte range */
996 #define SMBctemp 0x0E /* create temporary file */
997 #define SMBmknew 0x0F /* make new file */
998 #define SMBcheckpath 0x10 /* check directory path */
999 #define SMBexit 0x11 /* process exit */
1000 #define SMBlseek 0x12 /* seek */
1001 #define SMBtcon 0x70 /* tree connect */
1002 #define SMBtconX 0x75 /* tree connect and X*/
1003 #define SMBtdis 0x71 /* tree disconnect */
1004 #define SMBnegprot 0x72 /* negotiate protocol */
1005 #define SMBdskattr 0x80 /* get disk attributes */
1006 #define SMBsearch 0x81 /* search directory */
1007 #define SMBsplopen 0xC0 /* open print spool file */
1008 #define SMBsplwr 0xC1 /* write to print spool file */
1009 #define SMBsplclose 0xC2 /* close print spool file */
1010 #define SMBsplretq 0xC3 /* return print queue */
1011 #define SMBsends 0xD0 /* send single block message */
1012 #define SMBsendb 0xD1 /* send broadcast message */
1013 #define SMBfwdname 0xD2 /* forward user name */
1014 #define SMBcancelf 0xD3 /* cancel forward */
1015 #define SMBgetmac 0xD4 /* get machine name */
1016 #define SMBsendstrt 0xD5 /* send start of multi-block message */
1017 #define SMBsendend 0xD6 /* send end of multi-block message */
1018 #define SMBsendtxt 0xD7 /* send text of multi-block message */
1020 /* Core+ protocol */
1021 #define SMBlockread 0x13 /* Lock a range and read */
1022 #define SMBwriteunlock 0x14 /* Unlock a range then write */
1023 #define SMBreadbraw 0x1a /* read a block of data with no smb header */
1024 #define SMBwritebraw 0x1d /* write a block of data with no smb header */
1025 #define SMBwritec 0x20 /* secondary write request */
1026 #define SMBwriteclose 0x2c /* write a file then close it */
1028 /* dos extended protocol */
1029 #define SMBreadBraw 0x1A /* read block raw */
1030 #define SMBreadBmpx 0x1B /* read block multiplexed */
1031 #define SMBreadBs 0x1C /* read block (secondary response) */
1032 #define SMBwriteBraw 0x1D /* write block raw */
1033 #define SMBwriteBmpx 0x1E /* write block multiplexed */
1034 #define SMBwriteBs 0x1F /* write block (secondary request) */
1035 #define SMBwriteC 0x20 /* write complete response */
1036 #define SMBsetattrE 0x22 /* set file attributes expanded */
1037 #define SMBgetattrE 0x23 /* get file attributes expanded */
1038 #define SMBlockingX 0x24 /* lock/unlock byte ranges and X */
1039 #define SMBtrans 0x25 /* transaction - name, bytes in/out */
1040 #define SMBtranss 0x26 /* transaction (secondary request/response) */
1041 #define SMBioctl 0x27 /* IOCTL */
1042 #define SMBioctls 0x28 /* IOCTL (secondary request/response) */
1043 #define SMBcopy 0x29 /* copy */
1044 #define SMBmove 0x2A /* move */
1045 #define SMBecho 0x2B /* echo */
1046 #define SMBopenX 0x2D /* open and X */
1047 #define SMBreadX 0x2E /* read and X */
1048 #define SMBwriteX 0x2F /* write and X */
1049 #define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */
1050 #define SMBffirst 0x82 /* find first */
1051 #define SMBfunique 0x83 /* find unique */
1052 #define SMBfclose 0x84 /* find close */
1053 #define SMBkeepalive 0x85 /* keepalive */
1054 #define SMBinvalid 0xFE /* invalid command */
1056 /* Extended 2.0 protocol */
1057 #define SMBtrans2 0x32 /* TRANS2 protocol set */
1058 #define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */
1059 #define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */
1060 #define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
1061 #define SMBulogoffX 0x74 /* user logoff */
1063 /* NT SMB extensions. */
1064 #define SMBnttrans 0xA0 /* NT transact */
1065 #define SMBnttranss 0xA1 /* NT transact secondary */
1066 #define SMBntcreateX 0xA2 /* NT create and X */
1067 #define SMBntcancel 0xA4 /* NT cancel */
1068 #define SMBntrename 0xA5 /* NT rename */
1070 /* These are the trans subcommands */
1071 #define TRANSACT_SETNAMEDPIPEHANDLESTATE 0x01
1072 #define TRANSACT_DCERPCCMD 0x26
1073 #define TRANSACT_WAITNAMEDPIPEHANDLESTATE 0x53
1075 /* These are the TRANS2 sub commands */
1076 #define TRANSACT2_OPEN 0x00
1077 #define TRANSACT2_FINDFIRST 0x01
1078 #define TRANSACT2_FINDNEXT 0x02
1079 #define TRANSACT2_QFSINFO 0x03
1080 #define TRANSACT2_SETFSINFO 0x04
1081 #define TRANSACT2_QPATHINFO 0x05
1082 #define TRANSACT2_SETPATHINFO 0x06
1083 #define TRANSACT2_QFILEINFO 0x07
1084 #define TRANSACT2_SETFILEINFO 0x08
1085 #define TRANSACT2_FSCTL 0x09
1086 #define TRANSACT2_IOCTL 0x0A
1087 #define TRANSACT2_FINDNOTIFYFIRST 0x0B
1088 #define TRANSACT2_FINDNOTIFYNEXT 0x0C
1089 #define TRANSACT2_MKDIR 0x0D
1090 #define TRANSACT2_SESSION_SETUP 0x0E
1091 #define TRANSACT2_GET_DFS_REFERRAL 0x10
1092 #define TRANSACT2_REPORT_DFS_INCONSISTANCY 0x11
1094 /* These are the NT transact sub commands. */
1095 #define NT_TRANSACT_CREATE 1
1096 #define NT_TRANSACT_IOCTL 2
1097 #define NT_TRANSACT_SET_SECURITY_DESC 3
1098 #define NT_TRANSACT_NOTIFY_CHANGE 4
1099 #define NT_TRANSACT_RENAME 5
1100 #define NT_TRANSACT_QUERY_SECURITY_DESC 6
1101 #define NT_TRANSACT_GET_USER_QUOTA 7
1102 #define NT_TRANSACT_SET_USER_QUOTA 8
1104 /* These are the NT transact_get_user_quota sub commands */
1105 #define TRANSACT_GET_USER_QUOTA_LIST_CONTINUE 0x0000
1106 #define TRANSACT_GET_USER_QUOTA_LIST_START 0x0100
1107 #define TRANSACT_GET_USER_QUOTA_FOR_SID 0x0101
1109 /* Relevant IOCTL codes */
1110 #define IOCTL_QUERY_JOB_INFO 0x530060
1112 /* these are the trans2 sub fields for primary requests */
1113 #define smb_tpscnt smb_vwv0
1114 #define smb_tdscnt smb_vwv1
1115 #define smb_mprcnt smb_vwv2
1116 #define smb_mdrcnt smb_vwv3
1117 #define smb_msrcnt smb_vwv4
1118 #define smb_flags smb_vwv5
1119 #define smb_timeout smb_vwv6
1120 #define smb_pscnt smb_vwv9
1121 #define smb_psoff smb_vwv10
1122 #define smb_dscnt smb_vwv11
1123 #define smb_dsoff smb_vwv12
1124 #define smb_suwcnt smb_vwv13
1125 #define smb_setup smb_vwv14
1126 #define smb_setup0 smb_setup
1127 #define smb_setup1 (smb_setup+2)
1128 #define smb_setup2 (smb_setup+4)
1130 /* these are for the secondary requests */
1131 #define smb_spscnt smb_vwv2
1132 #define smb_spsoff smb_vwv3
1133 #define smb_spsdisp smb_vwv4
1134 #define smb_sdscnt smb_vwv5
1135 #define smb_sdsoff smb_vwv6
1136 #define smb_sdsdisp smb_vwv7
1137 #define smb_sfid smb_vwv8
1139 /* and these for responses */
1140 #define smb_tprcnt smb_vwv0
1141 #define smb_tdrcnt smb_vwv1
1142 #define smb_prcnt smb_vwv3
1143 #define smb_proff smb_vwv4
1144 #define smb_prdisp smb_vwv5
1145 #define smb_drcnt smb_vwv6
1146 #define smb_droff smb_vwv7
1147 #define smb_drdisp smb_vwv8
1149 /* these are for the NT trans primary request. */
1150 #define smb_nt_MaxSetupCount smb_vwv0
1151 #define smb_nt_Flags (smb_vwv0 + 1)
1152 #define smb_nt_TotalParameterCount (smb_vwv0 + 3)
1153 #define smb_nt_TotalDataCount (smb_vwv0 + 7)
1154 #define smb_nt_MaxParameterCount (smb_vwv0 + 11)
1155 #define smb_nt_MaxDataCount (smb_vwv0 + 15)
1156 #define smb_nt_ParameterCount (smb_vwv0 + 19)
1157 #define smb_nt_ParameterOffset (smb_vwv0 + 23)
1158 #define smb_nt_DataCount (smb_vwv0 + 27)
1159 #define smb_nt_DataOffset (smb_vwv0 + 31)
1160 #define smb_nt_SetupCount (smb_vwv0 + 35)
1161 #define smb_nt_Function (smb_vwv0 + 36)
1162 #define smb_nt_SetupStart (smb_vwv0 + 38)
1164 /* these are for the NT trans secondary request. */
1165 #define smb_nts_TotalParameterCount (smb_vwv0 + 3)
1166 #define smb_nts_TotalDataCount (smb_vwv0 + 7)
1167 #define smb_nts_ParameterCount (smb_vwv0 + 11)
1168 #define smb_nts_ParameterOffset (smb_vwv0 + 15)
1169 #define smb_nts_ParameterDisplacement (smb_vwv0 + 19)
1170 #define smb_nts_DataCount (smb_vwv0 + 23)
1171 #define smb_nts_DataOffset (smb_vwv0 + 27)
1172 #define smb_nts_DataDisplacement (smb_vwv0 + 31)
1174 /* these are for the NT trans reply. */
1175 #define smb_ntr_TotalParameterCount (smb_vwv0 + 3)
1176 #define smb_ntr_TotalDataCount (smb_vwv0 + 7)
1177 #define smb_ntr_ParameterCount (smb_vwv0 + 11)
1178 #define smb_ntr_ParameterOffset (smb_vwv0 + 15)
1179 #define smb_ntr_ParameterDisplacement (smb_vwv0 + 19)
1180 #define smb_ntr_DataCount (smb_vwv0 + 23)
1181 #define smb_ntr_DataOffset (smb_vwv0 + 27)
1182 #define smb_ntr_DataDisplacement (smb_vwv0 + 31)
1184 /* these are for the NT create_and_X */
1185 #define smb_ntcreate_NameLength (smb_vwv0 + 5)
1186 #define smb_ntcreate_Flags (smb_vwv0 + 7)
1187 #define smb_ntcreate_RootDirectoryFid (smb_vwv0 + 11)
1188 #define smb_ntcreate_DesiredAccess (smb_vwv0 + 15)
1189 #define smb_ntcreate_AllocationSize (smb_vwv0 + 19)
1190 #define smb_ntcreate_FileAttributes (smb_vwv0 + 27)
1191 #define smb_ntcreate_ShareAccess (smb_vwv0 + 31)
1192 #define smb_ntcreate_CreateDisposition (smb_vwv0 + 35)
1193 #define smb_ntcreate_CreateOptions (smb_vwv0 + 39)
1194 #define smb_ntcreate_ImpersonationLevel (smb_vwv0 + 43)
1195 #define smb_ntcreate_SecurityFlags (smb_vwv0 + 47)
1197 /* this is used on a TConX. I'm not sure the name is very helpful though */
1198 #define SMB_SUPPORT_SEARCH_BITS 0x0001
1199 #define SMB_SHARE_IN_DFS 0x0002
1201 /* Named pipe write mode flags. Used in writeX calls. */
1202 #define PIPE_RAW_MODE 0x4
1203 #define PIPE_START_MESSAGE 0x8
1205 /* File Specific access rights */
1206 #define FILE_READ_DATA 0x00000001
1207 #define FILE_WRITE_DATA 0x00000002
1208 #define FILE_APPEND_DATA 0x00000004
1209 #define FILE_READ_EA 0x00000008 /* File and directory */
1210 #define FILE_WRITE_EA 0x00000010 /* File and directory */
1211 #define FILE_EXECUTE 0x00000020
1212 #define FILE_DELETE_CHILD 0x00000040
1213 #define FILE_READ_ATTRIBUTES 0x00000080
1214 #define FILE_WRITE_ATTRIBUTES 0x00000100
1216 #define FILE_ALL_ACCESS 0x000001FF
1218 /* Directory specific access rights */
1219 #define FILE_LIST_DIRECTORY 0x00000001
1220 #define FILE_ADD_FILE 0x00000002
1221 #define FILE_ADD_SUBDIRECTORY 0x00000004
1222 #define FILE_TRAVERSE 0x00000020
1223 #define FILE_DELETE_CHILD 0x00000040
1225 /* the desired access to use when opening a pipe */
1226 #define DESIRED_ACCESS_PIPE 0x2019f
1228 /* Generic access masks & rights. */
1229 #define DELETE_ACCESS 0x00010000 /* (1L<<16) */
1230 #define READ_CONTROL_ACCESS 0x00020000 /* (1L<<17) */
1231 #define WRITE_DAC_ACCESS 0x00040000 /* (1L<<18) */
1232 #define WRITE_OWNER_ACCESS 0x00080000 /* (1L<<19) */
1233 #define SYNCHRONIZE_ACCESS 0x00100000 /* (1L<<20) */
1235 #define SYSTEM_SECURITY_ACCESS 0x01000000 /* (1L<<24) */
1236 #define MAXIMUM_ALLOWED_ACCESS 0x02000000 /* (1L<<25) */
1237 #define GENERIC_ALL_ACCESS 0x10000000 /* (1<<28) */
1238 #define GENERIC_EXECUTE_ACCESS 0x20000000 /* (1<<29) */
1239 #define GENERIC_WRITE_ACCESS 0x40000000 /* (1<<30) */
1240 #define GENERIC_READ_ACCESS ((unsigned)0x80000000) /* (((unsigned)1)<<31) */
1242 /* Mapping of generic access rights for files to specific rights. */
1244 #define FILE_GENERIC_ALL (STANDARD_RIGHTS_REQUIRED_ACCESS| SYNCHRONIZE_ACCESS|FILE_ALL_ACCESS)
1246 #define FILE_GENERIC_READ (STANDARD_RIGHTS_READ_ACCESS|FILE_READ_DATA|FILE_READ_ATTRIBUTES|\
1247 FILE_READ_EA|SYNCHRONIZE_ACCESS)
1249 #define FILE_GENERIC_WRITE (STD_RIGHT_READ_CONTROL_ACCESS|FILE_WRITE_DATA|FILE_WRITE_ATTRIBUTES|\
1250 FILE_WRITE_EA|FILE_APPEND_DATA|SYNCHRONIZE_ACCESS)
1252 #define FILE_GENERIC_EXECUTE (STANDARD_RIGHTS_EXECUTE_ACCESS|\
1253 FILE_EXECUTE|SYNCHRONIZE_ACCESS)
1255 /* Mapping of access rights to UNIX perms. */
1256 #define UNIX_ACCESS_RWX FILE_GENERIC_ALL
1257 #define UNIX_ACCESS_R FILE_GENERIC_READ
1258 #define UNIX_ACCESS_W FILE_GENERIC_WRITE
1259 #define UNIX_ACCESS_X FILE_GENERIC_EXECUTE
1261 /* Mapping of access rights to UNIX perms. for a UNIX directory. */
1262 #define UNIX_DIRECTORY_ACCESS_RWX FILE_GENERIC_ALL
1263 #define UNIX_DIRECTORY_ACCESS_R FILE_GENERIC_READ
1264 #define UNIX_DIRECTORY_ACCESS_W FILE_GENERIC_WRITE
1265 #define UNIX_DIRECTORY_ACCESS_X FILE_GENERIC_EXECUTE
1269 * This is the old mapping we used to use. To get W2KSP2 profiles
1270 * working we need to map to the canonical file perms.
1272 #define UNIX_ACCESS_RWX (UNIX_ACCESS_R|UNIX_ACCESS_W|UNIX_ACCESS_X)
1273 #define UNIX_ACCESS_R (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1274 FILE_READ_ATTRIBUTES|FILE_READ_EA|FILE_READ_DATA)
1275 #define UNIX_ACCESS_W (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1276 FILE_WRITE_ATTRIBUTES|FILE_WRITE_EA|\
1277 FILE_APPEND_DATA|FILE_WRITE_DATA)
1278 #define UNIX_ACCESS_X (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1279 FILE_EXECUTE|FILE_READ_ATTRIBUTES)
1282 #define UNIX_ACCESS_NONE (WRITE_OWNER_ACCESS)
1285 #define REQUEST_OPLOCK 2
1286 #define REQUEST_BATCH_OPLOCK 4
1287 #define OPEN_DIRECTORY 8
1288 #define EXTENDED_RESPONSE_REQUIRED 0x10
1290 /* ShareAccess field. */
1291 #define FILE_SHARE_NONE 0 /* Cannot be used in bitmask. */
1292 #define FILE_SHARE_READ 1
1293 #define FILE_SHARE_WRITE 2
1294 #define FILE_SHARE_DELETE 4
1296 /* FileAttributesField */
1297 #define FILE_ATTRIBUTE_READONLY 0x001L
1298 #define FILE_ATTRIBUTE_HIDDEN 0x002L
1299 #define FILE_ATTRIBUTE_SYSTEM 0x004L
1300 #define FILE_ATTRIBUTE_DIRECTORY 0x010L
1301 #define FILE_ATTRIBUTE_ARCHIVE 0x020L
1302 #define FILE_ATTRIBUTE_NORMAL 0x080L
1303 #define FILE_ATTRIBUTE_TEMPORARY 0x100L
1304 #define FILE_ATTRIBUTE_SPARSE 0x200L
1305 #define FILE_ATTRIBUTE_REPARSE_POINT 0x400L
1306 #define FILE_ATTRIBUTE_COMPRESSED 0x800L
1307 #define FILE_ATTRIBUTE_OFFLINE 0x1000L
1308 #define FILE_ATTRIBUTE_NONINDEXED 0x2000L
1309 #define FILE_ATTRIBUTE_ENCRYPTED 0x4000L
1310 #define SAMBA_ATTRIBUTES_MASK 0x7F
1312 /* Flags - combined with attributes. */
1313 #define FILE_FLAG_WRITE_THROUGH 0x80000000L
1314 #define FILE_FLAG_NO_BUFFERING 0x20000000L
1315 #define FILE_FLAG_RANDOM_ACCESS 0x10000000L
1316 #define FILE_FLAG_SEQUENTIAL_SCAN 0x08000000L
1317 #define FILE_FLAG_DELETE_ON_CLOSE 0x04000000L
1318 #define FILE_FLAG_BACKUP_SEMANTICS 0x02000000L
1319 #define FILE_FLAG_POSIX_SEMANTICS 0x01000000L
1321 /* CreateDisposition field. */
1322 #define FILE_SUPERSEDE 0 /* File exists overwrite/supersede. File not exist create. */
1323 #define FILE_OPEN 1 /* File exists open. File not exist fail. */
1324 #define FILE_CREATE 2 /* File exists fail. File not exist create. */
1325 #define FILE_OPEN_IF 3 /* File exists open. File not exist create. */
1326 #define FILE_OVERWRITE 4 /* File exists overwrite. File not exist fail. */
1327 #define FILE_OVERWRITE_IF 5 /* File exists overwrite. File not exist create. */
1329 /* CreateOptions field. */
1330 #define FILE_DIRECTORY_FILE 0x0001
1331 #define FILE_WRITE_THROUGH 0x0002
1332 #define FILE_SEQUENTIAL_ONLY 0x0004
1333 #define FILE_NON_DIRECTORY_FILE 0x0040
1334 #define FILE_NO_EA_KNOWLEDGE 0x0200
1335 #define FILE_EIGHT_DOT_THREE_ONLY 0x0400
1336 #define FILE_RANDOM_ACCESS 0x0800
1337 #define FILE_DELETE_ON_CLOSE 0x1000
1338 #define FILE_OPEN_BY_FILE_ID 0x2000
1340 /* Private create options used by the ntcreatex processing code. From Samba4. */
1341 #define NTCREATEX_OPTIONS_PRIVATE_DENY_DOS 0x01000000
1342 #define NTCREATEX_OPTIONS_PRIVATE_DENY_FCB 0x02000000
1344 /* Responses when opening a file. */
1345 #define FILE_WAS_SUPERSEDED 0
1346 #define FILE_WAS_OPENED 1
1347 #define FILE_WAS_CREATED 2
1348 #define FILE_WAS_OVERWRITTEN 3
1350 /* File type flags */
1351 #define FILE_TYPE_DISK 0
1352 #define FILE_TYPE_BYTE_MODE_PIPE 1
1353 #define FILE_TYPE_MESSAGE_MODE_PIPE 2
1354 #define FILE_TYPE_PRINTER 3
1355 #define FILE_TYPE_COMM_DEVICE 4
1356 #define FILE_TYPE_UNKNOWN 0xFFFF
1358 /* Flag for NT transact rename call. */
1359 #define RENAME_REPLACE_IF_EXISTS 1
1361 /* flags for SMBntrename call (from Samba4) */
1362 #define RENAME_FLAG_MOVE_CLUSTER_INFORMATION 0x102 /* ???? */
1363 #define RENAME_FLAG_HARD_LINK 0x103
1364 #define RENAME_FLAG_RENAME 0x104
1365 #define RENAME_FLAG_COPY 0x105
1367 /* Filesystem Attributes. */
1368 #define FILE_CASE_SENSITIVE_SEARCH 0x00000001
1369 #define FILE_CASE_PRESERVED_NAMES 0x00000002
1370 #define FILE_UNICODE_ON_DISK 0x00000004
1371 /* According to cifs9f, this is 4, not 8 */
1372 /* Acconding to testing, this actually sets the security attribute! */
1373 #define FILE_PERSISTENT_ACLS 0x00000008
1374 #define FILE_FILE_COMPRESSION 0x00000010
1375 #define FILE_VOLUME_QUOTAS 0x00000020
1376 #define FILE_SUPPORTS_SPARSE_FILES 0x00000040
1377 #define FILE_SUPPORTS_REPARSE_POINTS 0x00000080
1378 #define FILE_SUPPORTS_REMOTE_STORAGE 0x00000100
1379 #define FS_LFN_APIS 0x00004000
1380 #define FILE_VOLUME_IS_COMPRESSED 0x00008000
1381 #define FILE_SUPPORTS_OBJECT_IDS 0x00010000
1382 #define FILE_SUPPORTS_ENCRYPTION 0x00020000
1383 #define FILE_NAMED_STREAMS 0x00040000
1384 #define FILE_READ_ONLY_VOLUME 0x00080000
1386 /* ChangeNotify flags. */
1387 #define FILE_NOTIFY_CHANGE_FILE_NAME 0x001
1388 #define FILE_NOTIFY_CHANGE_DIR_NAME 0x002
1389 #define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x004
1390 #define FILE_NOTIFY_CHANGE_SIZE 0x008
1391 #define FILE_NOTIFY_CHANGE_LAST_WRITE 0x010
1392 #define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x020
1393 #define FILE_NOTIFY_CHANGE_CREATION 0x040
1394 #define FILE_NOTIFY_CHANGE_EA 0x080
1395 #define FILE_NOTIFY_CHANGE_SECURITY 0x100
1396 #define FILE_NOTIFY_CHANGE_STREAM_NAME 0x00000200
1397 #define FILE_NOTIFY_CHANGE_STREAM_SIZE 0x00000400
1398 #define FILE_NOTIFY_CHANGE_STREAM_WRITE 0x00000800
1400 #define FILE_NOTIFY_CHANGE_NAME \
1401 (FILE_NOTIFY_CHANGE_FILE_NAME|FILE_NOTIFY_CHANGE_DIR_NAME)
1403 /* change notify action results */
1404 #define NOTIFY_ACTION_ADDED 1
1405 #define NOTIFY_ACTION_REMOVED 2
1406 #define NOTIFY_ACTION_MODIFIED 3
1407 #define NOTIFY_ACTION_OLD_NAME 4
1408 #define NOTIFY_ACTION_NEW_NAME 5
1409 #define NOTIFY_ACTION_ADDED_STREAM 6
1410 #define NOTIFY_ACTION_REMOVED_STREAM 7
1411 #define NOTIFY_ACTION_MODIFIED_STREAM 8
1414 /* where to find the base of the SMB packet proper */
1415 #define smb_base(buf) (((char *)(buf))+4)
1417 /* we don't allow server strings to be longer than 48 characters as
1418 otherwise NT will not honour the announce packets */
1419 #define MAX_SERVER_STRING_LENGTH 48
1422 #define SMB_SUCCESS 0 /* The request was successful. */
1425 void dfs_unlogin(void);
1426 extern int dcelogin_atmost_once;
1430 char *strdup(char *s);
1434 #define SIGNAL_CAST (RETSIGTYPE (*)(int))
1441 /* This was set by JHT in liaison with Jeremy Allison early 1997
1443 * Version 4.0 - never made public
1444 * Version 4.10 - New to 1.9.16p2, lost in space 1.9.16p3 to 1.9.16p9
1445 * - Reappeared in 1.9.16p11 with fixed smbd services
1446 * Version 4.20 - To indicate that nmbd and browsing now works better
1447 * Version 4.50 - Set at release of samba-2.2.0 by JHT
1449 * Note: In the presence of NT4.X do not set above 4.9
1450 * Setting this above 4.9 can have undesired side-effects.
1451 * This may change again in Samba-3.0 after further testing. JHT
1454 #define DEFAULT_MAJOR_VERSION 0x04
1455 #define DEFAULT_MINOR_VERSION 0x09
1457 /* Browser Election Values */
1458 #define BROWSER_ELECTION_VERSION 0x010f
1459 #define BROWSER_CONSTANT 0xaa55
1461 /* Sercurity mode bits. */
1462 #define NEGOTIATE_SECURITY_USER_LEVEL 0x01
1463 #define NEGOTIATE_SECURITY_CHALLENGE_RESPONSE 0x02
1464 #define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04
1465 #define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08
1467 /* NT Flags2 bits - cifs6.txt section 3.1.2 */
1469 #define FLAGS2_LONG_PATH_COMPONENTS 0x0001
1470 #define FLAGS2_EXTENDED_ATTRIBUTES 0x0002
1471 #define FLAGS2_SMB_SECURITY_SIGNATURES 0x0004
1472 #define FLAGS2_IS_LONG_NAME 0x0040
1473 #define FLAGS2_EXTENDED_SECURITY 0x0800
1474 #define FLAGS2_DFS_PATHNAMES 0x1000
1475 #define FLAGS2_READ_PERMIT_EXECUTE 0x2000
1476 #define FLAGS2_32_BIT_ERROR_CODES 0x4000
1477 #define FLAGS2_UNICODE_STRINGS 0x8000
1479 #define FLAGS2_WIN2K_SIGNATURE 0xC852 /* Hack alert ! For now... JRA. */
1481 /* Capabilities. see ftp.microsoft.com/developr/drg/cifs/cifs/cifs4.txt */
1483 #define CAP_RAW_MODE 0x0001
1484 #define CAP_MPX_MODE 0x0002
1485 #define CAP_UNICODE 0x0004
1486 #define CAP_LARGE_FILES 0x0008
1487 #define CAP_NT_SMBS 0x0010
1488 #define CAP_RPC_REMOTE_APIS 0x0020
1489 #define CAP_STATUS32 0x0040
1490 #define CAP_LEVEL_II_OPLOCKS 0x0080
1491 #define CAP_LOCK_AND_READ 0x0100
1492 #define CAP_NT_FIND 0x0200
1493 #define CAP_DFS 0x1000
1494 #define CAP_W2K_SMBS 0x2000
1495 #define CAP_LARGE_READX 0x4000
1496 #define CAP_LARGE_WRITEX 0x8000
1497 #define CAP_UNIX 0x800000 /* Capabilities for UNIX extensions. Created by HP. */
1498 #define CAP_EXTENDED_SECURITY 0x80000000
1500 /* protocol types. It assumes that higher protocols include lower protocols
1502 enum protocol_types {PROTOCOL_NONE,PROTOCOL_CORE,PROTOCOL_COREPLUS,PROTOCOL_LANMAN1,PROTOCOL_LANMAN2,PROTOCOL_NT1};
1504 /* security levels */
1505 enum security_types {SEC_SHARE,SEC_USER,SEC_SERVER,SEC_DOMAIN,SEC_ADS};
1515 /* printing types */
1516 enum printing_types {PRINT_BSD,PRINT_SYSV,PRINT_AIX,PRINT_HPUX,
1517 PRINT_QNX,PRINT_PLP,PRINT_LPRNG,PRINT_SOFTQ,
1518 PRINT_CUPS,PRINT_LPRNT,PRINT_LPROS2,PRINT_IPRINT
1519 #if defined(DEVELOPER) || defined(ENABLE_BUILD_FARM_HACKS)
1520 ,PRINT_TEST,PRINT_VLP
1521 #endif /* DEVELOPER */
1524 /* LDAP schema types */
1525 enum schema_types {SCHEMA_COMPAT, SCHEMA_AD, SCHEMA_SAMBA};
1527 /* LDAP SSL options */
1528 enum ldap_ssl_types {LDAP_SSL_ON, LDAP_SSL_OFF, LDAP_SSL_START_TLS};
1530 /* LDAP PASSWD SYNC methods */
1531 enum ldap_passwd_sync_types {LDAP_PASSWD_SYNC_ON, LDAP_PASSWD_SYNC_OFF, LDAP_PASSWD_SYNC_ONLY};
1533 /* Remote architectures we know about. */
1534 enum remote_arch_types {RA_UNKNOWN, RA_WFWG, RA_OS2, RA_WIN95, RA_WINNT,
1535 RA_WIN2K, RA_WINXP, RA_WIN2K3, RA_SAMBA, RA_CIFSFS};
1538 enum case_handling {CASE_LOWER,CASE_UPPER};
1540 /* ACL compatibility */
1541 enum acl_compatibility {ACL_COMPAT_AUTO, ACL_COMPAT_WINNT, ACL_COMPAT_WIN2K};
1543 * Global value meaing that the smb_uid field should be
1544 * ingored (in share level security and protocol level == CORE)
1547 #define UID_FIELD_INVALID 0
1548 #define VUID_OFFSET 100 /* Amount to bias returned vuid numbers */
1551 * Size of buffer to use when moving files across filesystems.
1553 #define COPYBUF_SIZE (8*1024)
1556 * Used in chaining code.
1558 extern int chain_size;
1561 * Map the Core and Extended Oplock requesst bits down
1562 * to common bits (EXCLUSIVE_OPLOCK & BATCH_OPLOCK).
1568 #define CORE_OPLOCK_REQUEST(inbuf) \
1569 ((CVAL(inbuf,smb_flg)&(FLAG_REQUEST_OPLOCK|FLAG_REQUEST_BATCH_OPLOCK))>>5)
1572 * Extended protocol.
1574 #define EXTENDED_OPLOCK_REQUEST(inbuf) ((SVAL(inbuf,smb_vwv2)&((1<<1)|(1<<2)))>>1)
1577 #define LOCKING_ANDX_SHARED_LOCK 0x1
1578 #define LOCKING_ANDX_OPLOCK_RELEASE 0x2
1579 #define LOCKING_ANDX_CHANGE_LOCKTYPE 0x4
1580 #define LOCKING_ANDX_CANCEL_LOCK 0x8
1581 #define LOCKING_ANDX_LARGE_FILES 0x10
1584 * Bits we test with.
1585 * Note these must fit into 16-bits.
1589 #define EXCLUSIVE_OPLOCK 1
1590 #define BATCH_OPLOCK 2
1591 #define LEVEL_II_OPLOCK 4
1593 /* The following are Samba-private. */
1594 #define INTERNAL_OPEN_ONLY 8
1595 #define FAKE_LEVEL_II_OPLOCK 16 /* Client requested no_oplock, but we have to
1596 * inform potential level2 holders on
1598 #define DEFERRED_OPEN_ENTRY 32
1599 #define UNUSED_SHARE_MODE_ENTRY 64
1600 #define FORCE_OPLOCK_BREAK_TO_NONE 128
1602 /* None of the following should ever appear in fsp->oplock_request. */
1603 #define SAMBA_PRIVATE_OPLOCK_MASK (INTERNAL_OPEN_ONLY|DEFERRED_OPEN_ENTRY|UNUSED_SHARE_MODE_ENTRY|FORCE_OPLOCK_BREAK_TO_NONE)
1605 #define EXCLUSIVE_OPLOCK_TYPE(lck) ((lck) & ((unsigned int)EXCLUSIVE_OPLOCK|(unsigned int)BATCH_OPLOCK))
1606 #define BATCH_OPLOCK_TYPE(lck) ((lck) & (unsigned int)BATCH_OPLOCK)
1607 #define LEVEL_II_OPLOCK_TYPE(lck) ((lck) & ((unsigned int)LEVEL_II_OPLOCK|(unsigned int)FAKE_LEVEL_II_OPLOCK))
1609 struct inform_level2_message {
1613 unsigned long target_file_id;
1614 unsigned long source_file_id;
1617 /* kernel_oplock_message definition.
1619 struct kernel_oplock_message {
1622 unsigned long file_id;
1626 0 SMB_DEV_T dev 8 bytes.
1627 8 SMB_INO_T inode 8 bytes
1628 16 unsigned long file_id 4 bytes
1632 #define MSG_SMB_KERNEL_BREAK_SIZE 20
1634 /* file_renamed_message definition.
1636 struct file_renamed_message {
1639 char names[1]; A variable area containing sharepath and filename.
1643 0 SMB_DEV_T dev 8 bytes.
1644 8 SMB_INO_T inode 8 bytes
1645 16 char [] name zero terminated namelen bytes
1646 minimum length == 18.
1650 #define MSG_FILE_RENAMED_MIN_SIZE 16
1653 * On the wire return values for oplock types.
1656 #define CORE_OPLOCK_GRANTED (1<<5)
1657 #define EXTENDED_OPLOCK_GRANTED (1<<15)
1659 #define NO_OPLOCK_RETURN 0
1660 #define EXCLUSIVE_OPLOCK_RETURN 1
1661 #define BATCH_OPLOCK_RETURN 2
1662 #define LEVEL_II_OPLOCK_RETURN 3
1665 #define OPLOCKLEVEL_NONE 0
1666 #define OPLOCKLEVEL_II 1
1669 * Capabilities abstracted for different systems.
1672 enum smbd_capability {
1673 KERNEL_OPLOCK_CAPABILITY,
1674 DMAPI_ACCESS_CAPABILITY
1677 /* if a kernel does support oplocks then a structure of the following
1678 typee is used to describe how to interact with the kernel */
1679 struct kernel_oplocks {
1680 files_struct * (*receive_message)(fd_set *fds);
1681 BOOL (*set_oplock)(files_struct *fsp, int oplock_type);
1682 void (*release_oplock)(files_struct *fsp);
1683 BOOL (*msg_waiting)(fd_set *fds);
1684 int notification_fd;
1688 /* this structure defines the functions for doing change notify in
1689 various implementations */
1690 struct cnotify_fns {
1691 void *(*notify_add)(TALLOC_CTX *mem_ctx,
1692 struct event_context *event_ctx,
1693 files_struct *fsp, uint32 *filter);
1696 #include "smb_macros.h"
1698 #define MAX_NETBIOSNAME_LEN 16
1699 /* DOS character, NetBIOS namestring. Type used on the wire. */
1700 typedef char nstring[MAX_NETBIOSNAME_LEN];
1701 /* Unix character, NetBIOS namestring. Type used to manipulate name in nmbd. */
1702 typedef char unstring[MAX_NETBIOSNAME_LEN*4];
1704 /* A netbios name structure. */
1708 unsigned int name_type;
1711 /* A netbios node status array element. */
1712 typedef struct node_status_ {
1715 unsigned char flags;
1716 } NODE_STATUS_STRUCT;
1718 /* The extra info from a NetBIOS node status query */
1719 struct node_status_extra {
1720 unsigned char mac_addr[6];
1721 /* There really is more here ... */
1731 typedef struct user_struct {
1732 struct user_struct *next, *prev;
1733 uint16 vuid; /* Tag for this entry. */
1734 uid_t uid; /* uid of a validated user */
1735 gid_t gid; /* gid of a validated user */
1737 userdom_struct user;
1744 /* following groups stuff added by ih */
1745 /* This groups info is needed for when we become_user() for this uid */
1749 NT_USER_TOKEN *nt_user_token;
1751 DATA_BLOB session_key;
1753 char *session_keystr; /* used by utmp and pam session code.
1757 struct auth_serversupplied_info *server_info;
1759 struct auth_ntlmssp_state *auth_ntlmssp_state;
1763 struct unix_error_map {
1771 * Size of new password account encoding string. This is enough space to
1772 * hold 11 ACB characters, plus the surrounding [] and a terminating null.
1773 * Do not change unless you are adding new ACB bits!
1776 #define NEW_PW_FORMAT_SPACE_PADDED_LEN 14
1779 Do you want session setups at user level security with a invalid
1780 password to be rejected or allowed in as guest? WinNT rejects them
1781 but it can be a pain as it means "net view" needs to use a password
1783 You have 3 choices in the setting of map_to_guest:
1785 "NEVER_MAP_TO_GUEST" means session setups with an invalid password
1786 are rejected. This is the default.
1788 "MAP_TO_GUEST_ON_BAD_USER" means session setups with an invalid password
1789 are rejected, unless the username does not exist, in which case it
1790 is treated as a guest login
1792 "MAP_TO_GUEST_ON_BAD_PASSWORD" means session setups with an invalid password
1793 are treated as a guest login
1795 Note that map_to_guest only has an effect in user or server
1799 #define NEVER_MAP_TO_GUEST 0
1800 #define MAP_TO_GUEST_ON_BAD_USER 1
1801 #define MAP_TO_GUEST_ON_BAD_PASSWORD 2
1802 #define MAP_TO_GUEST_ON_BAD_UID 3
1804 #define SAFE_NETBIOS_CHARS ". -_"
1806 /* generic iconv conversion structure */
1807 typedef struct _smb_iconv_t {
1808 size_t (*direct)(void *cd, const char **inbuf, size_t *inbytesleft,
1809 char **outbuf, size_t *outbytesleft);
1810 size_t (*pull)(void *cd, const char **inbuf, size_t *inbytesleft,
1811 char **outbuf, size_t *outbytesleft);
1812 size_t (*push)(void *cd, const char **inbuf, size_t *inbytesleft,
1813 char **outbuf, size_t *outbytesleft);
1814 void *cd_direct, *cd_pull, *cd_push;
1815 char *from_name, *to_name;
1818 /* The maximum length of a trust account password.
1819 Used when we randomly create it, 15 char passwords
1820 exceed NT4's max password length */
1822 #define DEFAULT_TRUST_ACCOUNT_PASSWORD_LENGTH 14
1824 #include "popt_common.h"
1828 #define LDAP_PORT 389
1831 /* used by the IP comparison function */
1837 /* Special name type used to cause a _kerberos DNS lookup. */
1838 #define KDC_NAME_TYPE 0xDCDC
1840 /* Used by the SMB signing functions. */
1842 typedef struct smb_sign_info {
1843 void (*sign_outgoing_message)(char *outbuf, struct smb_sign_info *si);
1844 BOOL (*check_incoming_message)(char *inbuf, struct smb_sign_info *si, BOOL must_be_ok);
1845 void (*free_signing_context)(struct smb_sign_info *si);
1846 void *signing_context;
1848 BOOL negotiated_smb_signing;
1849 BOOL allow_smb_signing;
1851 BOOL mandatory_signing;
1852 BOOL seen_valid; /* Have I ever seen a validly signed packet? */
1862 struct ea_list *next, *prev;
1863 struct ea_struct ea;
1866 /* EA names used internally in Samba. KEEP UP TO DATE with prohibited_ea_names in trans2.c !. */
1867 #define SAMBA_POSIX_INHERITANCE_EA_NAME "user.SAMBA_PAI"
1868 /* EA to use for DOS attributes */
1869 #define SAMBA_XATTR_DOS_ATTRIB "user.DOSATTRIB"
1871 #define UUID_SIZE 16
1873 #define UUID_FLAT_SIZE 16
1874 typedef struct uuid_flat {
1875 uint8 info[UUID_FLAT_SIZE];
1878 /* map readonly options */
1879 enum mapreadonly_options {MAP_READONLY_NO, MAP_READONLY_YES, MAP_READONLY_PERMISSIONS};
1881 /* usershare error codes. */
1882 enum usershare_err {
1884 USERSHARE_MALFORMED_FILE,
1885 USERSHARE_BAD_VERSION,
1886 USERSHARE_MALFORMED_PATH,
1887 USERSHARE_MALFORMED_COMMENT_DEF,
1888 USERSHARE_MALFORMED_ACL_DEF,
1890 USERSHARE_PATH_NOT_ABSOLUTE,
1891 USERSHARE_PATH_IS_DENIED,
1892 USERSHARE_PATH_NOT_ALLOWED,
1893 USERSHARE_PATH_NOT_DIRECTORY,
1897 /* Different reasons for closing a file. */
1898 enum file_close_type {NORMAL_CLOSE=0,SHUTDOWN_CLOSE,ERROR_CLOSE};