2 Unix SMB/CIFS implementation.
3 client connect/disconnect routines
4 Copyright (C) Andrew Tridgell 1994-1998
5 Copyright (C) Andrew Bartlett 2001-2003
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program. If not, see <http://www.gnu.org/licenses/>.
27 {PROTOCOL_CORE,"PC NETWORK PROGRAM 1.0"},
28 {PROTOCOL_COREPLUS,"MICROSOFT NETWORKS 1.03"},
29 {PROTOCOL_LANMAN1,"MICROSOFT NETWORKS 3.0"},
30 {PROTOCOL_LANMAN1,"LANMAN1.0"},
31 {PROTOCOL_LANMAN2,"LM1.2X002"},
32 {PROTOCOL_LANMAN2,"DOS LANMAN2.1"},
33 {PROTOCOL_LANMAN2,"LANMAN2.1"},
34 {PROTOCOL_LANMAN2,"Samba"},
35 {PROTOCOL_NT1,"NT LANMAN 1.0"},
36 {PROTOCOL_NT1,"NT LM 0.12"},
40 static const char *star_smbserver_name = "*SMBSERVER";
43 * Set the user session key for a connection
44 * @param cli The cli structure to add it too
45 * @param session_key The session key used. (A copy of this is taken for the cli struct)
49 static void cli_set_session_key (struct cli_state *cli, const DATA_BLOB session_key)
51 cli->user_session_key = data_blob(session_key.data, session_key.length);
54 /****************************************************************************
55 Do an old lanman2 style session setup.
56 ****************************************************************************/
58 static NTSTATUS cli_session_setup_lanman2(struct cli_state *cli,
60 const char *pass, size_t passlen,
61 const char *workgroup)
63 DATA_BLOB session_key = data_blob_null;
64 DATA_BLOB lm_response = data_blob_null;
68 if (passlen > sizeof(pword)-1) {
69 return NT_STATUS_INVALID_PARAMETER;
72 /* LANMAN servers predate NT status codes and Unicode and ignore those
73 smb flags so we must disable the corresponding default capabilities
74 that would otherwise cause the Unicode and NT Status flags to be
75 set (and even returned by the server) */
77 cli->capabilities &= ~(CAP_UNICODE | CAP_STATUS32);
79 /* if in share level security then don't send a password now */
80 if (!(cli->sec_mode & NEGOTIATE_SECURITY_USER_LEVEL))
83 if (passlen > 0 && (cli->sec_mode & NEGOTIATE_SECURITY_CHALLENGE_RESPONSE) && passlen != 24) {
84 /* Encrypted mode needed, and non encrypted password supplied. */
85 lm_response = data_blob(NULL, 24);
86 if (!SMBencrypt(pass, cli->secblob.data,(uchar *)lm_response.data)) {
87 DEBUG(1, ("Password is > 14 chars in length, and is therefore incompatible with Lanman authentication\n"));
88 return NT_STATUS_ACCESS_DENIED;
90 } else if ((cli->sec_mode & NEGOTIATE_SECURITY_CHALLENGE_RESPONSE) && passlen == 24) {
91 /* Encrypted mode needed, and encrypted password supplied. */
92 lm_response = data_blob(pass, passlen);
93 } else if (passlen > 0) {
94 /* Plaintext mode needed, assume plaintext supplied. */
95 passlen = clistr_push(cli, pword, pass, sizeof(pword), STR_TERMINATE);
96 lm_response = data_blob(pass, passlen);
99 /* send a session setup command */
100 memset(cli->outbuf,'\0',smb_size);
101 cli_set_message(cli->outbuf,10, 0, True);
102 SCVAL(cli->outbuf,smb_com,SMBsesssetupX);
103 cli_setup_packet(cli);
105 SCVAL(cli->outbuf,smb_vwv0,0xFF);
106 SSVAL(cli->outbuf,smb_vwv2,cli->max_xmit);
107 SSVAL(cli->outbuf,smb_vwv3,2);
108 SSVAL(cli->outbuf,smb_vwv4,1);
109 SIVAL(cli->outbuf,smb_vwv5,cli->sesskey);
110 SSVAL(cli->outbuf,smb_vwv7,lm_response.length);
112 p = smb_buf(cli->outbuf);
113 memcpy(p,lm_response.data,lm_response.length);
114 p += lm_response.length;
115 p += clistr_push(cli, p, user, -1, STR_TERMINATE|STR_UPPER);
116 p += clistr_push(cli, p, workgroup, -1, STR_TERMINATE|STR_UPPER);
117 p += clistr_push(cli, p, "Unix", -1, STR_TERMINATE);
118 p += clistr_push(cli, p, "Samba", -1, STR_TERMINATE);
119 cli_setup_bcc(cli, p);
121 if (!cli_send_smb(cli) || !cli_receive_smb(cli)) {
122 return cli_nt_error(cli);
125 show_msg(cli->inbuf);
127 if (cli_is_error(cli)) {
128 return cli_nt_error(cli);
131 /* use the returned vuid from now on */
132 cli->vuid = SVAL(cli->inbuf,smb_uid);
133 fstrcpy(cli->user_name, user);
135 if (session_key.data) {
136 /* Have plaintext orginal */
137 cli_set_session_key(cli, session_key);
143 /****************************************************************************
144 Work out suitable capabilities to offer the server.
145 ****************************************************************************/
147 static uint32 cli_session_setup_capabilities(struct cli_state *cli)
149 uint32 capabilities = CAP_NT_SMBS;
151 if (!cli->force_dos_errors)
152 capabilities |= CAP_STATUS32;
154 if (cli->use_level_II_oplocks)
155 capabilities |= CAP_LEVEL_II_OPLOCKS;
157 capabilities |= (cli->capabilities & (CAP_UNICODE|CAP_LARGE_FILES|CAP_LARGE_READX|CAP_LARGE_WRITEX|CAP_DFS));
161 /****************************************************************************
162 Do a NT1 guest session setup.
163 ****************************************************************************/
165 static NTSTATUS cli_session_setup_guest(struct cli_state *cli)
168 uint32 capabilities = cli_session_setup_capabilities(cli);
170 memset(cli->outbuf, '\0', smb_size);
171 cli_set_message(cli->outbuf,13,0,True);
172 SCVAL(cli->outbuf,smb_com,SMBsesssetupX);
173 cli_setup_packet(cli);
175 SCVAL(cli->outbuf,smb_vwv0,0xFF);
176 SSVAL(cli->outbuf,smb_vwv2,CLI_BUFFER_SIZE);
177 SSVAL(cli->outbuf,smb_vwv3,2);
178 SSVAL(cli->outbuf,smb_vwv4,cli->pid);
179 SIVAL(cli->outbuf,smb_vwv5,cli->sesskey);
180 SSVAL(cli->outbuf,smb_vwv7,0);
181 SSVAL(cli->outbuf,smb_vwv8,0);
182 SIVAL(cli->outbuf,smb_vwv11,capabilities);
183 p = smb_buf(cli->outbuf);
184 p += clistr_push(cli, p, "", -1, STR_TERMINATE); /* username */
185 p += clistr_push(cli, p, "", -1, STR_TERMINATE); /* workgroup */
186 p += clistr_push(cli, p, "Unix", -1, STR_TERMINATE);
187 p += clistr_push(cli, p, "Samba", -1, STR_TERMINATE);
188 cli_setup_bcc(cli, p);
190 if (!cli_send_smb(cli) || !cli_receive_smb(cli)) {
191 return cli_nt_error(cli);
194 show_msg(cli->inbuf);
196 if (cli_is_error(cli)) {
197 return cli_nt_error(cli);
200 cli->vuid = SVAL(cli->inbuf,smb_uid);
202 p = smb_buf(cli->inbuf);
203 p += clistr_pull(cli, cli->server_os, p, sizeof(fstring), -1, STR_TERMINATE);
204 p += clistr_pull(cli, cli->server_type, p, sizeof(fstring), -1, STR_TERMINATE);
205 p += clistr_pull(cli, cli->server_domain, p, sizeof(fstring), -1, STR_TERMINATE);
207 if (strstr(cli->server_type, "Samba")) {
208 cli->is_samba = True;
211 fstrcpy(cli->user_name, "");
216 /****************************************************************************
217 Do a NT1 plaintext session setup.
218 ****************************************************************************/
220 static NTSTATUS cli_session_setup_plaintext(struct cli_state *cli,
221 const char *user, const char *pass,
222 const char *workgroup)
224 uint32 capabilities = cli_session_setup_capabilities(cli);
228 fstr_sprintf( lanman, "Samba %s", SAMBA_VERSION_STRING);
230 memset(cli->outbuf, '\0', smb_size);
231 cli_set_message(cli->outbuf,13,0,True);
232 SCVAL(cli->outbuf,smb_com,SMBsesssetupX);
233 cli_setup_packet(cli);
235 SCVAL(cli->outbuf,smb_vwv0,0xFF);
236 SSVAL(cli->outbuf,smb_vwv2,CLI_BUFFER_SIZE);
237 SSVAL(cli->outbuf,smb_vwv3,2);
238 SSVAL(cli->outbuf,smb_vwv4,cli->pid);
239 SIVAL(cli->outbuf,smb_vwv5,cli->sesskey);
240 SSVAL(cli->outbuf,smb_vwv8,0);
241 SIVAL(cli->outbuf,smb_vwv11,capabilities);
242 p = smb_buf(cli->outbuf);
244 /* check wether to send the ASCII or UNICODE version of the password */
246 if ( (capabilities & CAP_UNICODE) == 0 ) {
247 p += clistr_push(cli, p, pass, -1, STR_TERMINATE); /* password */
248 SSVAL(cli->outbuf,smb_vwv7,PTR_DIFF(p, smb_buf(cli->outbuf)));
251 /* For ucs2 passwords clistr_push calls ucs2_align, which causes
252 * the space taken by the unicode password to be one byte too
253 * long (as we're on an odd byte boundary here). Reduce the
254 * count by 1 to cope with this. Fixes smbclient against NetApp
255 * servers which can't cope. Fix from
256 * bryan.kolodziej@allenlund.com in bug #3840.
258 p += clistr_push(cli, p, pass, -1, STR_UNICODE|STR_TERMINATE); /* unicode password */
259 SSVAL(cli->outbuf,smb_vwv8,PTR_DIFF(p, smb_buf(cli->outbuf))-1);
262 p += clistr_push(cli, p, user, -1, STR_TERMINATE); /* username */
263 p += clistr_push(cli, p, workgroup, -1, STR_TERMINATE); /* workgroup */
264 p += clistr_push(cli, p, "Unix", -1, STR_TERMINATE);
265 p += clistr_push(cli, p, lanman, -1, STR_TERMINATE);
266 cli_setup_bcc(cli, p);
268 if (!cli_send_smb(cli) || !cli_receive_smb(cli)) {
269 return cli_nt_error(cli);
272 show_msg(cli->inbuf);
274 if (cli_is_error(cli)) {
275 return cli_nt_error(cli);
278 cli->vuid = SVAL(cli->inbuf,smb_uid);
279 p = smb_buf(cli->inbuf);
280 p += clistr_pull(cli, cli->server_os, p, sizeof(fstring), -1, STR_TERMINATE);
281 p += clistr_pull(cli, cli->server_type, p, sizeof(fstring), -1, STR_TERMINATE);
282 p += clistr_pull(cli, cli->server_domain, p, sizeof(fstring), -1, STR_TERMINATE);
283 fstrcpy(cli->user_name, user);
285 if (strstr(cli->server_type, "Samba")) {
286 cli->is_samba = True;
292 /****************************************************************************
293 do a NT1 NTLM/LM encrypted session setup - for when extended security
295 @param cli client state to create do session setup on
297 @param pass *either* cleartext password (passlen !=24) or LM response.
298 @param ntpass NT response, implies ntpasslen >=24, implies pass is not clear
299 @param workgroup The user's domain.
300 ****************************************************************************/
302 static NTSTATUS cli_session_setup_nt1(struct cli_state *cli, const char *user,
303 const char *pass, size_t passlen,
304 const char *ntpass, size_t ntpasslen,
305 const char *workgroup)
307 uint32 capabilities = cli_session_setup_capabilities(cli);
308 DATA_BLOB lm_response = data_blob_null;
309 DATA_BLOB nt_response = data_blob_null;
310 DATA_BLOB session_key = data_blob_null;
315 /* do nothing - guest login */
316 } else if (passlen != 24) {
317 if (lp_client_ntlmv2_auth()) {
318 DATA_BLOB server_chal;
319 DATA_BLOB names_blob;
320 server_chal = data_blob(cli->secblob.data, MIN(cli->secblob.length, 8));
322 /* note that the 'workgroup' here is a best guess - we don't know
323 the server's domain at this point. The 'server name' is also
326 names_blob = NTLMv2_generate_names_blob(cli->called.name, workgroup);
328 if (!SMBNTLMv2encrypt(user, workgroup, pass, &server_chal,
330 &lm_response, &nt_response, &session_key)) {
331 data_blob_free(&names_blob);
332 data_blob_free(&server_chal);
333 return NT_STATUS_ACCESS_DENIED;
335 data_blob_free(&names_blob);
336 data_blob_free(&server_chal);
340 E_md4hash(pass, nt_hash);
343 nt_response = data_blob_null;
345 nt_response = data_blob(NULL, 24);
346 SMBNTencrypt(pass,cli->secblob.data,nt_response.data);
348 /* non encrypted password supplied. Ignore ntpass. */
349 if (lp_client_lanman_auth()) {
350 lm_response = data_blob(NULL, 24);
351 if (!SMBencrypt(pass,cli->secblob.data, lm_response.data)) {
352 /* Oops, the LM response is invalid, just put
353 the NT response there instead */
354 data_blob_free(&lm_response);
355 lm_response = data_blob(nt_response.data, nt_response.length);
358 /* LM disabled, place NT# in LM field instead */
359 lm_response = data_blob(nt_response.data, nt_response.length);
362 session_key = data_blob(NULL, 16);
364 E_deshash(pass, session_key.data);
365 memset(&session_key.data[8], '\0', 8);
367 SMBsesskeygen_ntv1(nt_hash, NULL, session_key.data);
371 cli_simple_set_signing(cli, session_key, lm_response);
373 cli_simple_set_signing(cli, session_key, nt_response);
376 /* pre-encrypted password supplied. Only used for
377 security=server, can't do
378 signing because we don't have original key */
380 lm_response = data_blob(pass, passlen);
381 nt_response = data_blob(ntpass, ntpasslen);
384 /* send a session setup command */
385 memset(cli->outbuf,'\0',smb_size);
387 cli_set_message(cli->outbuf,13,0,True);
388 SCVAL(cli->outbuf,smb_com,SMBsesssetupX);
389 cli_setup_packet(cli);
391 SCVAL(cli->outbuf,smb_vwv0,0xFF);
392 SSVAL(cli->outbuf,smb_vwv2,CLI_BUFFER_SIZE);
393 SSVAL(cli->outbuf,smb_vwv3,2);
394 SSVAL(cli->outbuf,smb_vwv4,cli->pid);
395 SIVAL(cli->outbuf,smb_vwv5,cli->sesskey);
396 SSVAL(cli->outbuf,smb_vwv7,lm_response.length);
397 SSVAL(cli->outbuf,smb_vwv8,nt_response.length);
398 SIVAL(cli->outbuf,smb_vwv11,capabilities);
399 p = smb_buf(cli->outbuf);
400 if (lm_response.length) {
401 memcpy(p,lm_response.data, lm_response.length); p += lm_response.length;
403 if (nt_response.length) {
404 memcpy(p,nt_response.data, nt_response.length); p += nt_response.length;
406 p += clistr_push(cli, p, user, -1, STR_TERMINATE);
408 /* Upper case here might help some NTLMv2 implementations */
409 p += clistr_push(cli, p, workgroup, -1, STR_TERMINATE|STR_UPPER);
410 p += clistr_push(cli, p, "Unix", -1, STR_TERMINATE);
411 p += clistr_push(cli, p, "Samba", -1, STR_TERMINATE);
412 cli_setup_bcc(cli, p);
414 if (!cli_send_smb(cli) || !cli_receive_smb(cli)) {
415 result = cli_nt_error(cli);
419 /* show_msg(cli->inbuf); */
421 if (cli_is_error(cli)) {
422 result = cli_nt_error(cli);
426 /* use the returned vuid from now on */
427 cli->vuid = SVAL(cli->inbuf,smb_uid);
429 p = smb_buf(cli->inbuf);
430 p += clistr_pull(cli, cli->server_os, p, sizeof(fstring), -1, STR_TERMINATE);
431 p += clistr_pull(cli, cli->server_type, p, sizeof(fstring), -1, STR_TERMINATE);
432 p += clistr_pull(cli, cli->server_domain, p, sizeof(fstring), -1, STR_TERMINATE);
434 if (strstr(cli->server_type, "Samba")) {
435 cli->is_samba = True;
438 fstrcpy(cli->user_name, user);
440 if (session_key.data) {
441 /* Have plaintext orginal */
442 cli_set_session_key(cli, session_key);
445 result = NT_STATUS_OK;
447 data_blob_free(&lm_response);
448 data_blob_free(&nt_response);
449 data_blob_free(&session_key);
453 /****************************************************************************
454 Send a extended security session setup blob
455 ****************************************************************************/
457 static bool cli_session_setup_blob_send(struct cli_state *cli, DATA_BLOB blob)
459 uint32 capabilities = cli_session_setup_capabilities(cli);
462 capabilities |= CAP_EXTENDED_SECURITY;
464 /* send a session setup command */
465 memset(cli->outbuf,'\0',smb_size);
467 cli_set_message(cli->outbuf,12,0,True);
468 SCVAL(cli->outbuf,smb_com,SMBsesssetupX);
470 cli_setup_packet(cli);
472 SCVAL(cli->outbuf,smb_vwv0,0xFF);
473 SSVAL(cli->outbuf,smb_vwv2,CLI_BUFFER_SIZE);
474 SSVAL(cli->outbuf,smb_vwv3,2);
475 SSVAL(cli->outbuf,smb_vwv4,1);
476 SIVAL(cli->outbuf,smb_vwv5,0);
477 SSVAL(cli->outbuf,smb_vwv7,blob.length);
478 SIVAL(cli->outbuf,smb_vwv10,capabilities);
479 p = smb_buf(cli->outbuf);
480 memcpy(p, blob.data, blob.length);
482 p += clistr_push(cli, p, "Unix", -1, STR_TERMINATE);
483 p += clistr_push(cli, p, "Samba", -1, STR_TERMINATE);
484 cli_setup_bcc(cli, p);
485 return cli_send_smb(cli);
488 /****************************************************************************
489 Send a extended security session setup blob, returning a reply blob.
490 ****************************************************************************/
492 static DATA_BLOB cli_session_setup_blob_receive(struct cli_state *cli)
494 DATA_BLOB blob2 = data_blob_null;
498 if (!cli_receive_smb(cli))
501 show_msg(cli->inbuf);
503 if (cli_is_error(cli) && !NT_STATUS_EQUAL(cli_nt_error(cli),
504 NT_STATUS_MORE_PROCESSING_REQUIRED)) {
508 /* use the returned vuid from now on */
509 cli->vuid = SVAL(cli->inbuf,smb_uid);
511 p = smb_buf(cli->inbuf);
513 blob2 = data_blob(p, SVAL(cli->inbuf, smb_vwv3));
516 p += clistr_pull(cli, cli->server_os, p, sizeof(fstring), -1, STR_TERMINATE);
518 /* w2k with kerberos doesn't properly null terminate this field */
519 len = smb_buflen(cli->inbuf) - PTR_DIFF(p, smb_buf(cli->inbuf));
520 p += clistr_pull(cli, cli->server_type, p, sizeof(fstring), len, 0);
526 /****************************************************************************
527 Send a extended security session setup blob, returning a reply blob.
528 ****************************************************************************/
530 /* The following is calculated from :
532 * (smb_wcnt * 2) = 24 (smb_wcnt == 12 in cli_session_setup_blob_send() )
533 * (strlen("Unix") + 1 + strlen("Samba") + 1) * 2 = 22 (unicode strings at
537 #define BASE_SESSSETUP_BLOB_PACKET_SIZE (35 + 24 + 22)
539 static bool cli_session_setup_blob(struct cli_state *cli, DATA_BLOB blob, DATA_BLOB session_key_krb5)
541 int32 remaining = blob.length;
543 DATA_BLOB send_blob = data_blob_null;
544 int32 max_blob_size = 0;
545 DATA_BLOB receive_blob = data_blob_null;
547 if (cli->max_xmit < BASE_SESSSETUP_BLOB_PACKET_SIZE + 1) {
548 DEBUG(0,("cli_session_setup_blob: cli->max_xmit too small "
549 "(was %u, need minimum %u)\n",
550 (unsigned int)cli->max_xmit,
551 BASE_SESSSETUP_BLOB_PACKET_SIZE));
552 cli_set_nt_error(cli, NT_STATUS_INVALID_PARAMETER);
556 max_blob_size = cli->max_xmit - BASE_SESSSETUP_BLOB_PACKET_SIZE;
558 while ( remaining > 0) {
559 if (remaining >= max_blob_size) {
560 send_blob.length = max_blob_size;
561 remaining -= max_blob_size;
563 DATA_BLOB null_blob = data_blob_null;
565 send_blob.length = remaining;
568 /* This is the last packet in the sequence - turn signing on. */
569 cli_simple_set_signing(cli, session_key_krb5, null_blob);
572 send_blob.data = &blob.data[cur];
573 cur += send_blob.length;
575 DEBUG(10, ("cli_session_setup_blob: Remaining (%u) sending (%u) current (%u)\n",
576 (unsigned int)remaining,
577 (unsigned int)send_blob.length,
578 (unsigned int)cur ));
580 if (!cli_session_setup_blob_send(cli, send_blob)) {
581 DEBUG(0, ("cli_session_setup_blob: send failed\n"));
585 receive_blob = cli_session_setup_blob_receive(cli);
586 data_blob_free(&receive_blob);
588 if (cli_is_error(cli) &&
589 !NT_STATUS_EQUAL( cli_get_nt_error(cli),
590 NT_STATUS_MORE_PROCESSING_REQUIRED)) {
591 DEBUG(0, ("cli_session_setup_blob: receive failed "
592 "(%s)\n", nt_errstr(cli_get_nt_error(cli))));
601 /****************************************************************************
602 Use in-memory credentials cache
603 ****************************************************************************/
605 static void use_in_memory_ccache(void) {
606 setenv(KRB5_ENV_CCNAME, "MEMORY:cliconnect", 1);
609 /****************************************************************************
610 Do a spnego/kerberos encrypted session setup.
611 ****************************************************************************/
613 static ADS_STATUS cli_session_setup_kerberos(struct cli_state *cli, const char *principal, const char *workgroup)
615 DATA_BLOB negTokenTarg;
616 DATA_BLOB session_key_krb5;
619 DEBUG(2,("Doing kerberos session setup\n"));
621 /* generate the encapsulated kerberos5 ticket */
622 rc = spnego_gen_negTokenTarg(principal, 0, &negTokenTarg, &session_key_krb5, 0, NULL);
625 DEBUG(1, ("cli_session_setup_kerberos: spnego_gen_negTokenTarg failed: %s\n",
627 return ADS_ERROR_KRB5(rc);
631 file_save("negTokenTarg.dat", negTokenTarg.data, negTokenTarg.length);
634 if (!cli_session_setup_blob(cli, negTokenTarg, session_key_krb5)) {
635 data_blob_free(&negTokenTarg);
636 data_blob_free(&session_key_krb5);
637 return ADS_ERROR_NT(cli_nt_error(cli));
640 cli_set_session_key(cli, session_key_krb5);
642 data_blob_free(&negTokenTarg);
643 data_blob_free(&session_key_krb5);
645 if (cli_is_error(cli)) {
646 if (NT_STATUS_IS_OK(cli_nt_error(cli))) {
647 return ADS_ERROR_NT(NT_STATUS_UNSUCCESSFUL);
650 return ADS_ERROR_NT(cli_nt_error(cli));
652 #endif /* HAVE_KRB5 */
655 /****************************************************************************
656 Do a spnego/NTLMSSP encrypted session setup.
657 ****************************************************************************/
659 static NTSTATUS cli_session_setup_ntlmssp(struct cli_state *cli, const char *user,
660 const char *pass, const char *domain)
662 struct ntlmssp_state *ntlmssp_state;
666 DATA_BLOB blob = data_blob_null;
667 DATA_BLOB blob_in = data_blob_null;
668 DATA_BLOB blob_out = data_blob_null;
670 cli_temp_set_signing(cli);
672 if (!NT_STATUS_IS_OK(nt_status = ntlmssp_client_start(&ntlmssp_state))) {
675 ntlmssp_want_feature(ntlmssp_state, NTLMSSP_FEATURE_SESSION_KEY);
677 if (!NT_STATUS_IS_OK(nt_status = ntlmssp_set_username(ntlmssp_state, user))) {
680 if (!NT_STATUS_IS_OK(nt_status = ntlmssp_set_domain(ntlmssp_state, domain))) {
683 if (!NT_STATUS_IS_OK(nt_status = ntlmssp_set_password(ntlmssp_state, pass))) {
688 nt_status = ntlmssp_update(ntlmssp_state,
690 data_blob_free(&blob_in);
691 if (NT_STATUS_EQUAL(nt_status, NT_STATUS_MORE_PROCESSING_REQUIRED) || NT_STATUS_IS_OK(nt_status)) {
693 /* and wrap it in a SPNEGO wrapper */
694 msg1 = gen_negTokenInit(OID_NTLMSSP, blob_out);
696 /* wrap it in SPNEGO */
697 msg1 = spnego_gen_auth(blob_out);
700 /* now send that blob on its way */
701 if (!cli_session_setup_blob_send(cli, msg1)) {
702 DEBUG(3, ("Failed to send NTLMSSP/SPNEGO blob to server!\n"));
703 nt_status = NT_STATUS_UNSUCCESSFUL;
705 blob = cli_session_setup_blob_receive(cli);
707 nt_status = cli_nt_error(cli);
708 if (cli_is_error(cli) && NT_STATUS_IS_OK(nt_status)) {
709 if (cli->smb_rw_error == SMB_READ_BAD_SIG) {
710 nt_status = NT_STATUS_ACCESS_DENIED;
712 nt_status = NT_STATUS_UNSUCCESSFUL;
716 data_blob_free(&msg1);
720 if (NT_STATUS_IS_OK(nt_status)) {
721 nt_status = NT_STATUS_UNSUCCESSFUL;
723 } else if ((turn == 1) &&
724 NT_STATUS_EQUAL(nt_status, NT_STATUS_MORE_PROCESSING_REQUIRED)) {
725 DATA_BLOB tmp_blob = data_blob_null;
726 /* the server might give us back two challenges */
727 if (!spnego_parse_challenge(blob, &blob_in,
729 DEBUG(3,("Failed to parse challenges\n"));
730 nt_status = NT_STATUS_INVALID_PARAMETER;
732 data_blob_free(&tmp_blob);
734 if (!spnego_parse_auth_response(blob, nt_status, OID_NTLMSSP,
736 DEBUG(3,("Failed to parse auth response\n"));
737 if (NT_STATUS_IS_OK(nt_status)
738 || NT_STATUS_EQUAL(nt_status, NT_STATUS_MORE_PROCESSING_REQUIRED))
739 nt_status = NT_STATUS_INVALID_PARAMETER;
742 data_blob_free(&blob);
743 data_blob_free(&blob_out);
745 } while (NT_STATUS_EQUAL(nt_status, NT_STATUS_MORE_PROCESSING_REQUIRED));
747 data_blob_free(&blob_in);
749 if (NT_STATUS_IS_OK(nt_status)) {
751 DATA_BLOB key = data_blob(ntlmssp_state->session_key.data,
752 ntlmssp_state->session_key.length);
753 DATA_BLOB null_blob = data_blob_null;
756 fstrcpy(cli->server_domain, ntlmssp_state->server_domain);
757 cli_set_session_key(cli, ntlmssp_state->session_key);
759 res = cli_simple_set_signing(cli, key, null_blob);
761 data_blob_free(&key);
765 /* 'resign' the last message, so we get the right sequence numbers
766 for checking the first reply from the server */
767 cli_calculate_sign_mac(cli, cli->outbuf);
769 if (!cli_check_sign_mac(cli, cli->inbuf)) {
770 nt_status = NT_STATUS_ACCESS_DENIED;
775 /* we have a reference conter on ntlmssp_state, if we are signing
776 then the state will be kept by the signing engine */
778 ntlmssp_end(&ntlmssp_state);
780 if (!NT_STATUS_IS_OK(nt_status)) {
786 /****************************************************************************
787 Do a spnego encrypted session setup.
788 ****************************************************************************/
790 ADS_STATUS cli_session_setup_spnego(struct cli_state *cli, const char *user,
791 const char *pass, const char *domain)
794 char *OIDs[ASN1_MAX_OIDS];
796 bool got_kerberos_mechanism = False;
798 const char *p = NULL;
799 char *account = NULL;
801 DEBUG(3,("Doing spnego session setup (blob length=%lu)\n", (unsigned long)cli->secblob.length));
803 /* the server might not even do spnego */
804 if (cli->secblob.length <= 16) {
805 DEBUG(3,("server didn't supply a full spnego negprot\n"));
810 file_save("negprot.dat", cli->secblob.data, cli->secblob.length);
813 /* there is 16 bytes of GUID before the real spnego packet starts */
814 blob = data_blob(cli->secblob.data+16, cli->secblob.length-16);
816 /* the server sent us the first part of the SPNEGO exchange in the negprot
818 if (!spnego_parse_negTokenInit(blob, OIDs, &principal)) {
819 data_blob_free(&blob);
820 return ADS_ERROR_NT(NT_STATUS_INVALID_PARAMETER);
822 data_blob_free(&blob);
824 /* make sure the server understands kerberos */
825 for (i=0;OIDs[i];i++) {
826 DEBUG(3,("got OID=%s\n", OIDs[i]));
827 if (strcmp(OIDs[i], OID_KERBEROS5_OLD) == 0 ||
828 strcmp(OIDs[i], OID_KERBEROS5) == 0) {
829 got_kerberos_mechanism = True;
834 DEBUG(3,("got principal=%s\n", principal ? principal : "<null>"));
836 if (got_kerberos_mechanism && (principal == NULL)) {
838 * It is WRONG to depend on the principal sent in the negprot
839 * reply, but right now we do it. So for safety (don't
840 * segfault later) disable Kerberos when no principal was
843 DEBUG(1, ("Kerberos mech was offered, but no principal was "
844 "sent, disabling Kerberos\n"));
845 cli->use_kerberos = False;
848 fstrcpy(cli->user_name, user);
851 /* If password is set we reauthenticate to kerberos server
852 * and do not store results */
854 if (got_kerberos_mechanism && cli->use_kerberos) {
860 use_in_memory_ccache();
861 ret = kerberos_kinit_password(user, pass, 0 /* no time correction for now */, NULL);
864 SAFE_FREE(principal);
865 DEBUG(0, ("Kinit failed: %s\n", error_message(ret)));
866 if (cli->fallback_after_kerberos)
868 return ADS_ERROR_KRB5(ret);
872 /* If we get a bad principal, try to guess it if
873 we have a valid host NetBIOS name.
875 if (strequal(principal, ADS_IGNORE_PRINCIPAL)) {
876 SAFE_FREE(principal);
879 if (principal == NULL &&
880 !is_ipaddress(cli->desthost) &&
881 !strequal(star_smbserver_name,
884 char *machine = NULL;
886 DEBUG(3,("cli_session_setup_spnego: got a "
887 "bad server principal, trying to guess ...\n"));
889 host = strchr_m(cli->desthost, '.');
891 machine = SMB_STRNDUP(cli->desthost,
892 host - cli->desthost);
894 machine = SMB_STRDUP(cli->desthost);
896 if (machine == NULL) {
897 return ADS_ERROR_NT(NT_STATUS_NO_MEMORY);
900 realm = kerberos_get_default_realm_from_ccache();
901 if (realm && *realm) {
902 if (asprintf(&principal, "%s$@%s",
903 machine, realm) < 0) {
906 return ADS_ERROR_NT(NT_STATUS_NO_MEMORY);
908 DEBUG(3,("cli_session_setup_spnego: guessed "
909 "server principal=%s\n",
910 principal ? principal : "<null>"));
917 rc = cli_session_setup_kerberos(cli, principal, domain);
918 if (ADS_ERR_OK(rc) || !cli->fallback_after_kerberos) {
919 SAFE_FREE(principal);
926 SAFE_FREE(principal);
930 account = talloc_strdup(talloc_tos(), user);
931 ADS_ERROR_HAVE_NO_MEMORY(account);
933 /* when falling back to ntlmssp while authenticating with a machine
934 * account strip off the realm - gd */
936 if ((p = strchr_m(user, '@')) != NULL) {
937 account[PTR_DIFF(p,user)] = '\0';
940 return ADS_ERROR_NT(cli_session_setup_ntlmssp(cli, account, pass, domain));
943 /****************************************************************************
944 Send a session setup. The username and workgroup is in UNIX character
945 format and must be converted to DOS codepage format before sending. If the
946 password is in plaintext, the same should be done.
947 ****************************************************************************/
949 NTSTATUS cli_session_setup(struct cli_state *cli,
951 const char *pass, int passlen,
952 const char *ntpass, int ntpasslen,
953 const char *workgroup)
959 fstrcpy(user2, user);
968 /* allow for workgroups as part of the username */
969 if ((p=strchr_m(user2,'\\')) || (p=strchr_m(user2,'/')) ||
970 (p=strchr_m(user2,*lp_winbind_separator()))) {
976 if (cli->protocol < PROTOCOL_LANMAN1) {
980 /* now work out what sort of session setup we are going to
981 do. I have split this into separate functions to make the
982 flow a bit easier to understand (tridge) */
984 /* if its an older server then we have to use the older request format */
986 if (cli->protocol < PROTOCOL_NT1) {
987 if (!lp_client_lanman_auth() && passlen != 24 && (*pass)) {
988 DEBUG(1, ("Server requested LM password but 'client lanman auth'"
990 return NT_STATUS_ACCESS_DENIED;
993 if ((cli->sec_mode & NEGOTIATE_SECURITY_CHALLENGE_RESPONSE) == 0 &&
994 !lp_client_plaintext_auth() && (*pass)) {
995 DEBUG(1, ("Server requested plaintext password but "
996 "'client plaintext auth' is disabled\n"));
997 return NT_STATUS_ACCESS_DENIED;
1000 return cli_session_setup_lanman2(cli, user, pass, passlen,
1004 /* if no user is supplied then we have to do an anonymous connection.
1005 passwords are ignored */
1007 if (!user || !*user)
1008 return cli_session_setup_guest(cli);
1010 /* if the server is share level then send a plaintext null
1011 password at this point. The password is sent in the tree
1014 if ((cli->sec_mode & NEGOTIATE_SECURITY_USER_LEVEL) == 0)
1015 return cli_session_setup_plaintext(cli, user, "", workgroup);
1017 /* if the server doesn't support encryption then we have to use
1018 plaintext. The second password is ignored */
1020 if ((cli->sec_mode & NEGOTIATE_SECURITY_CHALLENGE_RESPONSE) == 0) {
1021 if (!lp_client_plaintext_auth() && (*pass)) {
1022 DEBUG(1, ("Server requested plaintext password but "
1023 "'client plaintext auth' is disabled\n"));
1024 return NT_STATUS_ACCESS_DENIED;
1026 return cli_session_setup_plaintext(cli, user, pass, workgroup);
1029 /* if the server supports extended security then use SPNEGO */
1031 if (cli->capabilities & CAP_EXTENDED_SECURITY) {
1032 ADS_STATUS status = cli_session_setup_spnego(cli, user, pass, workgroup);
1033 if (!ADS_ERR_OK(status)) {
1034 DEBUG(3, ("SPNEGO login failed: %s\n", ads_errstr(status)));
1035 return ads_ntstatus(status);
1040 /* otherwise do a NT1 style session setup */
1041 status = cli_session_setup_nt1(cli, user, pass, passlen,
1042 ntpass, ntpasslen, workgroup);
1043 if (!NT_STATUS_IS_OK(status)) {
1044 DEBUG(3,("cli_session_setup: NT1 session setup "
1045 "failed: %s\n", nt_errstr(status)));
1050 if (strstr(cli->server_type, "Samba")) {
1051 cli->is_samba = True;
1054 return NT_STATUS_OK;
1057 /****************************************************************************
1059 *****************************************************************************/
1061 bool cli_ulogoff(struct cli_state *cli)
1063 memset(cli->outbuf,'\0',smb_size);
1064 cli_set_message(cli->outbuf,2,0,True);
1065 SCVAL(cli->outbuf,smb_com,SMBulogoffX);
1066 cli_setup_packet(cli);
1067 SSVAL(cli->outbuf,smb_vwv0,0xFF);
1068 SSVAL(cli->outbuf,smb_vwv2,0); /* no additional info */
1071 if (!cli_receive_smb(cli))
1074 if (cli_is_error(cli)) {
1082 /****************************************************************************
1084 ****************************************************************************/
1086 bool cli_send_tconX(struct cli_state *cli,
1087 const char *share, const char *dev, const char *pass, int passlen)
1089 fstring fullshare, pword;
1091 memset(cli->outbuf,'\0',smb_size);
1092 memset(cli->inbuf,'\0',smb_size);
1094 fstrcpy(cli->share, share);
1096 /* in user level security don't send a password now */
1097 if (cli->sec_mode & NEGOTIATE_SECURITY_USER_LEVEL) {
1101 DEBUG(1, ("Server not using user level security and no password supplied.\n"));
1105 if ((cli->sec_mode & NEGOTIATE_SECURITY_CHALLENGE_RESPONSE) &&
1106 *pass && passlen != 24) {
1107 if (!lp_client_lanman_auth()) {
1108 DEBUG(1, ("Server requested LANMAN password "
1109 "(share-level security) but "
1110 "'client lanman auth' is disabled\n"));
1115 * Non-encrypted passwords - convert to DOS codepage before encryption.
1118 SMBencrypt(pass,cli->secblob.data,(uchar *)pword);
1120 if((cli->sec_mode & (NEGOTIATE_SECURITY_USER_LEVEL|NEGOTIATE_SECURITY_CHALLENGE_RESPONSE)) == 0) {
1121 if (!lp_client_plaintext_auth() && (*pass)) {
1122 DEBUG(1, ("Server requested plaintext "
1123 "password but 'client plaintext "
1124 "auth' is disabled\n"));
1129 * Non-encrypted passwords - convert to DOS codepage before using.
1131 passlen = clistr_push(cli, pword, pass, sizeof(pword), STR_TERMINATE);
1135 memcpy(pword, pass, passlen);
1140 slprintf(fullshare, sizeof(fullshare)-1,
1141 "\\\\%s\\%s", cli->desthost, share);
1143 cli_set_message(cli->outbuf,4, 0, True);
1144 SCVAL(cli->outbuf,smb_com,SMBtconX);
1145 cli_setup_packet(cli);
1147 SSVAL(cli->outbuf,smb_vwv0,0xFF);
1148 SSVAL(cli->outbuf,smb_vwv2,TCONX_FLAG_EXTENDED_RESPONSE);
1149 SSVAL(cli->outbuf,smb_vwv3,passlen);
1151 p = smb_buf(cli->outbuf);
1153 memcpy(p,pword,passlen);
1156 p += clistr_push(cli, p, fullshare, -1, STR_TERMINATE |STR_UPPER);
1157 p += clistr_push(cli, p, dev, -1, STR_TERMINATE |STR_UPPER | STR_ASCII);
1159 cli_setup_bcc(cli, p);
1162 if (!cli_receive_smb(cli))
1165 if (cli_is_error(cli))
1168 clistr_pull(cli, cli->dev, smb_buf(cli->inbuf), sizeof(fstring), -1, STR_TERMINATE|STR_ASCII);
1170 if (cli->protocol >= PROTOCOL_NT1 &&
1171 smb_buflen(cli->inbuf) == 3) {
1172 /* almost certainly win95 - enable bug fixes */
1176 /* Make sure that we have the optional support 16-bit field. WCT > 2 */
1177 /* Avoids issues when connecting to Win9x boxes sharing files */
1179 cli->dfsroot = False;
1180 if ( (CVAL(cli->inbuf, smb_wct))>2 && cli->protocol >= PROTOCOL_LANMAN2 )
1181 cli->dfsroot = (SVAL( cli->inbuf, smb_vwv2 ) & SMB_SHARE_IN_DFS) ? True : False;
1183 cli->cnum = SVAL(cli->inbuf,smb_tid);
1187 /****************************************************************************
1188 Send a tree disconnect.
1189 ****************************************************************************/
1191 bool cli_tdis(struct cli_state *cli)
1193 memset(cli->outbuf,'\0',smb_size);
1194 cli_set_message(cli->outbuf,0,0,True);
1195 SCVAL(cli->outbuf,smb_com,SMBtdis);
1196 SSVAL(cli->outbuf,smb_tid,cli->cnum);
1197 cli_setup_packet(cli);
1200 if (!cli_receive_smb(cli))
1203 if (cli_is_error(cli)) {
1211 /****************************************************************************
1212 Send a negprot command.
1213 ****************************************************************************/
1215 void cli_negprot_send(struct cli_state *cli)
1220 if (cli->protocol < PROTOCOL_NT1)
1221 cli->use_spnego = False;
1223 memset(cli->outbuf,'\0',smb_size);
1225 /* setup the protocol strings */
1226 cli_set_message(cli->outbuf,0,0,True);
1228 p = smb_buf(cli->outbuf);
1230 prots[numprots].name && prots[numprots].prot<=cli->protocol;
1233 p += clistr_push(cli, p, prots[numprots].name, -1, STR_TERMINATE);
1236 SCVAL(cli->outbuf,smb_com,SMBnegprot);
1237 cli_setup_bcc(cli, p);
1238 cli_setup_packet(cli);
1240 SCVAL(smb_buf(cli->outbuf),0,2);
1245 /****************************************************************************
1246 Send a negprot command.
1247 ****************************************************************************/
1249 bool cli_negprot(struct cli_state *cli)
1255 if (cli->protocol < PROTOCOL_NT1)
1256 cli->use_spnego = False;
1258 memset(cli->outbuf,'\0',smb_size);
1260 /* setup the protocol strings */
1261 for (plength=0,numprots=0;
1262 prots[numprots].name && prots[numprots].prot<=cli->protocol;
1264 plength += strlen(prots[numprots].name)+2;
1266 cli_set_message(cli->outbuf,0,plength,True);
1268 p = smb_buf(cli->outbuf);
1270 prots[numprots].name && prots[numprots].prot<=cli->protocol;
1273 p += clistr_push(cli, p, prots[numprots].name, -1, STR_TERMINATE);
1276 SCVAL(cli->outbuf,smb_com,SMBnegprot);
1277 cli_setup_packet(cli);
1279 SCVAL(smb_buf(cli->outbuf),0,2);
1282 if (!cli_receive_smb(cli))
1285 show_msg(cli->inbuf);
1287 if (cli_is_error(cli) ||
1288 ((int)SVAL(cli->inbuf,smb_vwv0) >= numprots)) {
1292 cli->protocol = prots[SVAL(cli->inbuf,smb_vwv0)].prot;
1294 if ((cli->protocol < PROTOCOL_NT1) && cli->sign_info.mandatory_signing) {
1295 DEBUG(0,("cli_negprot: SMB signing is mandatory and the selected protocol level doesn't support it.\n"));
1299 if (cli->protocol >= PROTOCOL_NT1) {
1302 cli->sec_mode = CVAL(cli->inbuf,smb_vwv1);
1303 cli->max_mux = SVAL(cli->inbuf, smb_vwv1+1);
1304 cli->max_xmit = IVAL(cli->inbuf,smb_vwv3+1);
1305 cli->sesskey = IVAL(cli->inbuf,smb_vwv7+1);
1306 cli->serverzone = SVALS(cli->inbuf,smb_vwv15+1);
1307 cli->serverzone *= 60;
1308 /* this time arrives in real GMT */
1309 ts = interpret_long_date(cli->inbuf+smb_vwv11+1);
1310 cli->servertime = ts.tv_sec;
1311 cli->secblob = data_blob(smb_buf(cli->inbuf),smb_buflen(cli->inbuf));
1312 cli->capabilities = IVAL(cli->inbuf,smb_vwv9+1);
1313 if (cli->capabilities & CAP_RAW_MODE) {
1314 cli->readbraw_supported = True;
1315 cli->writebraw_supported = True;
1317 /* work out if they sent us a workgroup */
1318 if (!(cli->capabilities & CAP_EXTENDED_SECURITY) &&
1319 smb_buflen(cli->inbuf) > 8) {
1320 clistr_pull(cli, cli->server_domain,
1321 smb_buf(cli->inbuf)+8, sizeof(cli->server_domain),
1322 smb_buflen(cli->inbuf)-8, STR_UNICODE|STR_NOALIGN);
1326 * As signing is slow we only turn it on if either the client or
1327 * the server require it. JRA.
1330 if (cli->sec_mode & NEGOTIATE_SECURITY_SIGNATURES_REQUIRED) {
1331 /* Fail if server says signing is mandatory and we don't want to support it. */
1332 if (!cli->sign_info.allow_smb_signing) {
1333 DEBUG(0,("cli_negprot: SMB signing is mandatory and we have disabled it.\n"));
1336 cli->sign_info.negotiated_smb_signing = True;
1337 cli->sign_info.mandatory_signing = True;
1338 } else if (cli->sign_info.mandatory_signing && cli->sign_info.allow_smb_signing) {
1339 /* Fail if client says signing is mandatory and the server doesn't support it. */
1340 if (!(cli->sec_mode & NEGOTIATE_SECURITY_SIGNATURES_ENABLED)) {
1341 DEBUG(1,("cli_negprot: SMB signing is mandatory and the server doesn't support it.\n"));
1344 cli->sign_info.negotiated_smb_signing = True;
1345 cli->sign_info.mandatory_signing = True;
1346 } else if (cli->sec_mode & NEGOTIATE_SECURITY_SIGNATURES_ENABLED) {
1347 cli->sign_info.negotiated_smb_signing = True;
1350 if (cli->capabilities & (CAP_LARGE_READX|CAP_LARGE_WRITEX)) {
1351 SAFE_FREE(cli->outbuf);
1352 SAFE_FREE(cli->inbuf);
1353 cli->outbuf = (char *)SMB_MALLOC(CLI_SAMBA_MAX_LARGE_READX_SIZE+SAFETY_MARGIN);
1354 cli->inbuf = (char *)SMB_MALLOC(CLI_SAMBA_MAX_LARGE_READX_SIZE+SAFETY_MARGIN);
1355 cli->bufsize = CLI_SAMBA_MAX_LARGE_READX_SIZE;
1358 } else if (cli->protocol >= PROTOCOL_LANMAN1) {
1359 cli->use_spnego = False;
1360 cli->sec_mode = SVAL(cli->inbuf,smb_vwv1);
1361 cli->max_xmit = SVAL(cli->inbuf,smb_vwv2);
1362 cli->max_mux = SVAL(cli->inbuf, smb_vwv3);
1363 cli->sesskey = IVAL(cli->inbuf,smb_vwv6);
1364 cli->serverzone = SVALS(cli->inbuf,smb_vwv10);
1365 cli->serverzone *= 60;
1366 /* this time is converted to GMT by make_unix_date */
1367 cli->servertime = cli_make_unix_date(cli,cli->inbuf+smb_vwv8);
1368 cli->readbraw_supported = ((SVAL(cli->inbuf,smb_vwv5) & 0x1) != 0);
1369 cli->writebraw_supported = ((SVAL(cli->inbuf,smb_vwv5) & 0x2) != 0);
1370 cli->secblob = data_blob(smb_buf(cli->inbuf),smb_buflen(cli->inbuf));
1372 /* the old core protocol */
1373 cli->use_spnego = False;
1375 cli->serverzone = get_time_zone(time(NULL));
1378 cli->max_xmit = MIN(cli->max_xmit, CLI_BUFFER_SIZE);
1380 /* a way to force ascii SMB */
1381 if (getenv("CLI_FORCE_ASCII"))
1382 cli->capabilities &= ~CAP_UNICODE;
1387 /****************************************************************************
1388 Send a session request. See rfc1002.txt 4.3 and 4.3.2.
1389 ****************************************************************************/
1391 bool cli_session_request(struct cli_state *cli,
1392 struct nmb_name *calling, struct nmb_name *called)
1397 memcpy(&(cli->calling), calling, sizeof(*calling));
1398 memcpy(&(cli->called ), called , sizeof(*called ));
1400 /* put in the destination name */
1401 p = cli->outbuf+len;
1402 name_mangle(cli->called .name, p, cli->called .name_type);
1406 p = cli->outbuf+len;
1407 name_mangle(cli->calling.name, p, cli->calling.name_type);
1410 /* 445 doesn't have session request */
1411 if (cli->port == 445)
1414 /* send a session request (RFC 1002) */
1415 /* setup the packet length
1416 * Remove four bytes from the length count, since the length
1417 * field in the NBT Session Service header counts the number
1418 * of bytes which follow. The cli_send_smb() function knows
1419 * about this and accounts for those four bytes.
1423 _smb_setlen(cli->outbuf,len);
1424 SCVAL(cli->outbuf,0,0x81);
1427 DEBUG(5,("Sent session request\n"));
1429 if (!cli_receive_smb(cli))
1432 if (CVAL(cli->inbuf,0) == 0x84) {
1433 /* C. Hoch 9/14/95 Start */
1434 /* For information, here is the response structure.
1435 * We do the byte-twiddling to for portability.
1436 struct RetargetResponse{
1438 unsigned char flags;
1444 uint16_t port = (CVAL(cli->inbuf,8)<<8)+CVAL(cli->inbuf,9);
1445 struct in_addr dest_ip;
1447 /* SESSION RETARGET */
1448 putip((char *)&dest_ip,cli->inbuf+4);
1449 in_addr_to_sockaddr_storage(&cli->dest_ss, dest_ip);
1451 cli->fd = open_socket_out(SOCK_STREAM,
1454 LONG_CONNECT_TIMEOUT);
1458 DEBUG(3,("Retargeted\n"));
1460 set_socket_options(cli->fd, lp_socket_options());
1467 DEBUG(0,("Retarget recursion - failing\n"));
1471 ret = cli_session_request(cli, calling, called);
1475 } /* C. Hoch 9/14/95 End */
1477 if (CVAL(cli->inbuf,0) != 0x82) {
1478 /* This is the wrong place to put the error... JRA. */
1479 cli->rap_error = CVAL(cli->inbuf,4);
1485 /****************************************************************************
1486 Open the client sockets.
1487 ****************************************************************************/
1489 NTSTATUS cli_connect(struct cli_state *cli,
1491 struct sockaddr_storage *dest_ss)
1494 int name_type = 0x20;
1495 TALLOC_CTX *frame = talloc_stackframe();
1496 unsigned int num_addrs = 0;
1498 struct sockaddr_storage *ss_arr = NULL;
1501 /* reasonable default hostname */
1503 host = star_smbserver_name;
1506 fstrcpy(cli->desthost, host);
1508 /* allow hostnames of the form NAME#xx and do a netbios lookup */
1509 if ((p = strchr(cli->desthost, '#'))) {
1510 name_type = strtol(p+1, NULL, 16);
1514 if (!dest_ss || is_zero_addr(dest_ss)) {
1515 NTSTATUS status =resolve_name_list(frame,
1520 if (!NT_STATUS_IS_OK(status)) {
1522 return NT_STATUS_BAD_NETWORK_NAME;
1526 ss_arr = TALLOC_P(frame, struct sockaddr_storage);
1529 return NT_STATUS_NO_MEMORY;
1534 for (i = 0; i < num_addrs; i++) {
1535 cli->dest_ss = ss_arr[i];
1536 if (getenv("LIBSMB_PROG")) {
1537 cli->fd = sock_exec(getenv("LIBSMB_PROG"));
1539 /* try 445 first, then 139 */
1540 uint16_t port = cli->port?cli->port:445;
1541 cli->fd = open_socket_out(SOCK_STREAM, &cli->dest_ss,
1542 port, cli->timeout);
1543 if (cli->fd == -1 && cli->port == 0) {
1545 cli->fd = open_socket_out(SOCK_STREAM, &cli->dest_ss,
1546 port, cli->timeout);
1548 if (cli->fd != -1) {
1552 if (cli->fd == -1) {
1553 char addr[INET6_ADDRSTRLEN];
1554 print_sockaddr(addr, sizeof(addr), &ss_arr[i]);
1555 DEBUG(2,("Error connecting to %s (%s)\n",
1556 dest_ss?addr:host,strerror(errno)));
1558 /* Exit from loop on first connection. */
1563 if (cli->fd == -1) {
1565 return map_nt_error_from_unix(errno);
1569 *dest_ss = cli->dest_ss;
1572 set_socket_options(cli->fd, lp_socket_options());
1575 return NT_STATUS_OK;
1579 establishes a connection to after the negprot.
1580 @param output_cli A fully initialised cli structure, non-null only on success
1581 @param dest_host The netbios name of the remote host
1582 @param dest_ss (optional) The the destination IP, NULL for name based lookup
1583 @param port (optional) The destination port (0 for default)
1584 @param retry bool. Did this connection fail with a retryable error ?
1587 NTSTATUS cli_start_connection(struct cli_state **output_cli,
1588 const char *my_name,
1589 const char *dest_host,
1590 struct sockaddr_storage *dest_ss, int port,
1591 int signing_state, int flags,
1595 struct nmb_name calling;
1596 struct nmb_name called;
1597 struct cli_state *cli;
1598 struct sockaddr_storage ss;
1604 my_name = global_myname();
1606 if (!(cli = cli_initialise())) {
1607 return NT_STATUS_NO_MEMORY;
1610 make_nmb_name(&calling, my_name, 0x0);
1611 make_nmb_name(&called , dest_host, 0x20);
1613 if (cli_set_port(cli, port) != port) {
1615 return NT_STATUS_UNSUCCESSFUL;
1618 cli_set_timeout(cli, 10000); /* 10 seconds. */
1628 DEBUG(3,("Connecting to host=%s\n", dest_host));
1630 nt_status = cli_connect(cli, dest_host, &ss);
1631 if (!NT_STATUS_IS_OK(nt_status)) {
1632 char addr[INET6_ADDRSTRLEN];
1633 print_sockaddr(addr, sizeof(addr), &ss);
1634 DEBUG(1,("cli_start_connection: failed to connect to %s (%s). Error %s\n",
1635 nmb_namestr(&called), addr, nt_errstr(nt_status) ));
1643 if (!cli_session_request(cli, &calling, &called)) {
1645 DEBUG(1,("session request to %s failed (%s)\n",
1646 called.name, cli_errstr(cli)));
1647 if ((p=strchr(called.name, '.')) && !is_ipaddress(called.name)) {
1651 if (strcmp(called.name, star_smbserver_name)) {
1652 make_nmb_name(&called , star_smbserver_name, 0x20);
1655 return NT_STATUS_BAD_NETWORK_NAME;
1658 cli_setup_signing_state(cli, signing_state);
1660 if (flags & CLI_FULL_CONNECTION_DONT_SPNEGO)
1661 cli->use_spnego = False;
1662 else if (flags & CLI_FULL_CONNECTION_USE_KERBEROS)
1663 cli->use_kerberos = True;
1665 if ((flags & CLI_FULL_CONNECTION_FALLBACK_AFTER_KERBEROS) &&
1666 cli->use_kerberos) {
1667 cli->fallback_after_kerberos = true;
1670 if (!cli_negprot(cli)) {
1671 DEBUG(1,("failed negprot\n"));
1672 nt_status = cli_nt_error(cli);
1673 if (NT_STATUS_IS_OK(nt_status)) {
1674 nt_status = NT_STATUS_UNSUCCESSFUL;
1681 return NT_STATUS_OK;
1686 establishes a connection right up to doing tconX, password specified.
1687 @param output_cli A fully initialised cli structure, non-null only on success
1688 @param dest_host The netbios name of the remote host
1689 @param dest_ip (optional) The the destination IP, NULL for name based lookup
1690 @param port (optional) The destination port (0 for default)
1691 @param service (optional) The share to make the connection to. Should be 'unqualified' in any way.
1692 @param service_type The 'type' of serivice.
1693 @param user Username, unix string
1694 @param domain User's domain
1695 @param password User's password, unencrypted unix string.
1696 @param retry bool. Did this connection fail with a retryable error ?
1699 NTSTATUS cli_full_connection(struct cli_state **output_cli,
1700 const char *my_name,
1701 const char *dest_host,
1702 struct sockaddr_storage *dest_ss, int port,
1703 const char *service, const char *service_type,
1704 const char *user, const char *domain,
1705 const char *password, int flags,
1710 struct cli_state *cli = NULL;
1711 int pw_len = password ? strlen(password)+1 : 0;
1715 if (password == NULL) {
1719 nt_status = cli_start_connection(&cli, my_name, dest_host,
1720 dest_ss, port, signing_state,
1723 if (!NT_STATUS_IS_OK(nt_status)) {
1727 nt_status = cli_session_setup(cli, user, password, pw_len, password,
1729 if (!NT_STATUS_IS_OK(nt_status)) {
1731 if (!(flags & CLI_FULL_CONNECTION_ANONYMOUS_FALLBACK)) {
1732 DEBUG(1,("failed session setup with %s\n",
1733 nt_errstr(nt_status)));
1738 nt_status = cli_session_setup(cli, "", "", 0, "", 0, domain);
1739 if (!NT_STATUS_IS_OK(nt_status)) {
1740 DEBUG(1,("anonymous failed session setup with %s\n",
1741 nt_errstr(nt_status)));
1748 if (!cli_send_tconX(cli, service, service_type, password, pw_len)) {
1749 nt_status = cli_nt_error(cli);
1750 DEBUG(1,("failed tcon_X with %s\n", nt_errstr(nt_status)));
1752 if (NT_STATUS_IS_OK(nt_status)) {
1753 nt_status = NT_STATUS_UNSUCCESSFUL;
1759 cli_init_creds(cli, user, domain, password);
1762 return NT_STATUS_OK;
1765 /****************************************************************************
1766 Attempt a NetBIOS session request, falling back to *SMBSERVER if needed.
1767 ****************************************************************************/
1769 bool attempt_netbios_session_request(struct cli_state **ppcli, const char *srchost, const char *desthost,
1770 struct sockaddr_storage *pdest_ss)
1772 struct nmb_name calling, called;
1774 make_nmb_name(&calling, srchost, 0x0);
1777 * If the called name is an IP address
1778 * then use *SMBSERVER immediately.
1781 if(is_ipaddress(desthost)) {
1782 make_nmb_name(&called, star_smbserver_name, 0x20);
1784 make_nmb_name(&called, desthost, 0x20);
1787 if (!cli_session_request(*ppcli, &calling, &called)) {
1789 struct nmb_name smbservername;
1791 make_nmb_name(&smbservername, star_smbserver_name, 0x20);
1794 * If the name wasn't *SMBSERVER then
1795 * try with *SMBSERVER if the first name fails.
1798 if (nmb_name_equal(&called, &smbservername)) {
1801 * The name used was *SMBSERVER, don't bother with another name.
1804 DEBUG(0,("attempt_netbios_session_request: %s rejected the session for name *SMBSERVER \
1805 with error %s.\n", desthost, cli_errstr(*ppcli) ));
1810 cli_shutdown(*ppcli);
1812 *ppcli = cli_initialise();
1814 /* Out of memory... */
1818 status = cli_connect(*ppcli, desthost, pdest_ss);
1819 if (!NT_STATUS_IS_OK(status) ||
1820 !cli_session_request(*ppcli, &calling, &smbservername)) {
1821 DEBUG(0,("attempt_netbios_session_request: %s rejected the session for \
1822 name *SMBSERVER with error %s\n", desthost, cli_errstr(*ppcli) ));
1830 /****************************************************************************
1831 Send an old style tcon.
1832 ****************************************************************************/
1833 NTSTATUS cli_raw_tcon(struct cli_state *cli,
1834 const char *service, const char *pass, const char *dev,
1835 uint16 *max_xmit, uint16 *tid)
1839 if (!lp_client_plaintext_auth() && (*pass)) {
1840 DEBUG(1, ("Server requested plaintext password but 'client "
1841 "plaintext auth' is disabled\n"));
1842 return NT_STATUS_ACCESS_DENIED;
1845 memset(cli->outbuf,'\0',smb_size);
1846 memset(cli->inbuf,'\0',smb_size);
1848 cli_set_message(cli->outbuf, 0, 0, True);
1849 SCVAL(cli->outbuf,smb_com,SMBtcon);
1850 cli_setup_packet(cli);
1852 p = smb_buf(cli->outbuf);
1853 *p++ = 4; p += clistr_push(cli, p, service, -1, STR_TERMINATE | STR_NOALIGN);
1854 *p++ = 4; p += clistr_push(cli, p, pass, -1, STR_TERMINATE | STR_NOALIGN);
1855 *p++ = 4; p += clistr_push(cli, p, dev, -1, STR_TERMINATE | STR_NOALIGN);
1857 cli_setup_bcc(cli, p);
1860 if (!cli_receive_smb(cli)) {
1861 return NT_STATUS_UNEXPECTED_NETWORK_ERROR;
1864 if (cli_is_error(cli)) {
1865 return cli_nt_error(cli);
1868 *max_xmit = SVAL(cli->inbuf, smb_vwv0);
1869 *tid = SVAL(cli->inbuf, smb_vwv1);
1871 return NT_STATUS_OK;
1874 /* Return a cli_state pointing at the IPC$ share for the given server */
1876 struct cli_state *get_ipc_connect(char *server,
1877 struct sockaddr_storage *server_ss,
1878 const struct user_auth_info *user_info)
1880 struct cli_state *cli;
1882 uint32_t flags = CLI_FULL_CONNECTION_ANONYMOUS_FALLBACK;
1884 if (user_info->use_kerberos) {
1885 flags |= CLI_FULL_CONNECTION_USE_KERBEROS;
1888 nt_status = cli_full_connection(&cli, NULL, server, server_ss, 0, "IPC$", "IPC",
1889 user_info->username ? user_info->username : "",
1891 user_info->password ? user_info->password : "",
1895 if (NT_STATUS_IS_OK(nt_status)) {
1897 } else if (is_ipaddress(server)) {
1898 /* windows 9* needs a correct NMB name for connections */
1899 fstring remote_name;
1901 if (name_status_find("*", 0, 0, server_ss, remote_name)) {
1902 cli = get_ipc_connect(remote_name, server_ss, user_info);
1911 * Given the IP address of a master browser on the network, return its
1912 * workgroup and connect to it.
1914 * This function is provided to allow additional processing beyond what
1915 * get_ipc_connect_master_ip_bcast() does, e.g. to retrieve the list of master
1916 * browsers and obtain each master browsers' list of domains (in case the
1917 * first master browser is recently on the network and has not yet
1918 * synchronized with other master browsers and therefore does not yet have the
1919 * entire network browse list)
1922 struct cli_state *get_ipc_connect_master_ip(TALLOC_CTX *ctx,
1923 struct ip_service *mb_ip,
1924 const struct user_auth_info *user_info,
1925 char **pp_workgroup_out)
1927 char addr[INET6_ADDRSTRLEN];
1929 struct cli_state *cli;
1930 struct sockaddr_storage server_ss;
1932 *pp_workgroup_out = NULL;
1934 print_sockaddr(addr, sizeof(addr), &mb_ip->ss);
1935 DEBUG(99, ("Looking up name of master browser %s\n",
1939 * Do a name status query to find out the name of the master browser.
1940 * We use <01><02>__MSBROWSE__<02>#01 if *#00 fails because a domain
1941 * master browser will not respond to a wildcard query (or, at least,
1942 * an NT4 server acting as the domain master browser will not).
1944 * We might be able to use ONLY the query on MSBROWSE, but that's not
1945 * yet been tested with all Windows versions, so until it is, leave
1946 * the original wildcard query as the first choice and fall back to
1947 * MSBROWSE if the wildcard query fails.
1949 if (!name_status_find("*", 0, 0x1d, &mb_ip->ss, name) &&
1950 !name_status_find(MSBROWSE, 1, 0x1d, &mb_ip->ss, name)) {
1952 DEBUG(99, ("Could not retrieve name status for %s\n",
1957 if (!find_master_ip(name, &server_ss)) {
1958 DEBUG(99, ("Could not find master ip for %s\n", name));
1962 *pp_workgroup_out = talloc_strdup(ctx, name);
1964 DEBUG(4, ("found master browser %s, %s\n", name, addr));
1966 print_sockaddr(addr, sizeof(addr), &server_ss);
1967 cli = get_ipc_connect(addr, &server_ss, user_info);
1973 * Return the IP address and workgroup of a master browser on the network, and
1977 struct cli_state *get_ipc_connect_master_ip_bcast(TALLOC_CTX *ctx,
1978 const struct user_auth_info *user_info,
1979 char **pp_workgroup_out)
1981 struct ip_service *ip_list;
1982 struct cli_state *cli;
1985 *pp_workgroup_out = NULL;
1987 DEBUG(99, ("Do broadcast lookup for workgroups on local network\n"));
1989 /* Go looking for workgroups by broadcasting on the local network */
1991 if (!NT_STATUS_IS_OK(name_resolve_bcast(MSBROWSE, 1, &ip_list,
1993 DEBUG(99, ("No master browsers responded\n"));
1997 for (i = 0; i < count; i++) {
1998 char addr[INET6_ADDRSTRLEN];
1999 print_sockaddr(addr, sizeof(addr), &ip_list[i].ss);
2000 DEBUG(99, ("Found master browser %s\n", addr));
2002 cli = get_ipc_connect_master_ip(ctx, &ip_list[i],
2003 user_info, pp_workgroup_out);