+++ /dev/null
-#!/bin/sh
-
-INSTALLPERMS=$1
-DESTDIR=$2
-prefix=`echo $3 | sed 's/\/\//\//g'`
-BINDIR=`echo $4 | sed 's/\/\//\//g'`
-SBINDIR=@sbindir@
-shift
-shift
-shift
-shift
-
-for p in $*; do
- p2=`basename $p`
- echo "Installing $p as $DESTDIR/$BINDIR/$p2 "
- if [ -f $DESTDIR/$BINDIR/$p2 ]; then
- rm -f $DESTDIR/$BINDIR/$p2.old
- mv $DESTDIR/$BINDIR/$p2 $DESTDIR/$BINDIR/$p2.old
- fi
- cp $p $DESTDIR/$BINDIR/
- chmod $INSTALLPERMS $DESTDIR/$BINDIR/$p2
-done
-
-
-cat << EOF
-======================================================================
-The binaries are installed. You may restore the old binaries (if there
-were any) using the command "make revert". You may uninstall the binaries
-using the command "make uninstallbin" or "make uninstall" to uninstall
-binaries, man pages and shell scripts.
-======================================================================
-EOF
-
-exit 0
+++ /dev/null
-#!/bin/sh
-#fist version March 2002, Herb Lewis
-
-DESTDIR=$1
-DATDIR=`echo $2 | sed 's/\/\//\//g'`
-SRCDIR=$3/
-shift
-shift
-shift
-
-case $0 in
- *uninstall*)
- if test ! -d "$DESTDIR/$DATDIR"; then
- echo "Directory $DESTDIR/$DATDIR does not exist! "
- echo "Do a "make installmsg" or "make install" first. "
- exit 1
- fi
- mode='uninstall'
- ;;
- *) mode='install' ;;
-esac
-
-for f in $SRCDIR/../codepages/*.dat; do
- FNAME="$DESTDIR/$DATDIR/`basename $f`"
- if test "$mode" = 'install'; then
- echo "Installing $f as $FNAME "
- cp "$f" "$FNAME"
- if test ! -f "$FNAME"; then
- echo "Cannot install $FNAME. Does $USER have privileges? "
- exit 1
- fi
- chmod 0644 "$FNAME"
- elif test "$mode" = 'uninstall'; then
- echo "Removing $FNAME "
- rm -f "$FNAME"
- if test -f "$FNAME"; then
- echo "Cannot remove $FNAME. Does $USER have privileges? "
- exit 1
- fi
- else
- echo "Unknown mode, $mode. Script called as $0 "
- exit 1
- fi
-done
-
-if test "$mode" = 'install'; then
- cat << EOF
-======================================================================
-The dat files have been installed. You may uninstall the dat files
-using the command "make uninstalldat" or "make uninstall" to uninstall
-binaries, man pages, dat files, and shell scripts.
-======================================================================
-EOF
-else
- cat << EOF
-======================================================================
-The dat files have been removed. You may restore these files using
-the command "make installdat" or "make install" to install binaries,
-man pages, modules, dat files, and shell scripts.
-======================================================================
-EOF
-fi
-
-exit 0
-
+++ /dev/null
-#!/bin/sh
-
-INSTALLPERMS=$1
-DESTDIR=`echo $2 | sed 's/\/\//\//g'`
-shift
-shift
-
-for dir in $@; do
- DIRNAME=`echo $dir | sed 's/\/\//\//g'`
- if [ ! -d $DESTDIR/$DIRNAME ]; then
- mkdir -m $INSTALLPERMS -p $DESTDIR/$DIRNAME
- fi
-
- if [ ! -d $DESTDIR/$DIRNAME ]; then
- echo "Failed to make directory $DESTDIR/$DIRNAME "
- exit 1
- fi
-done
+++ /dev/null
-#!/bin/sh
-#5 July 96 Dan.Shearer@unisa.edu.au removed hardcoded values
-#
-# 13 Aug 2001 Rafal Szczesniak <mimir@spin.ict.pwr.wroc.pl>
-# modified to accomodate international man pages (inspired
-# by Japanese edition's approach)
-
-MANDIR=`echo $1 | sed 's/\/\//\//g'`
-SRCDIR=$2/
-langs=$3
-
-if [ $# -ge 4 ] ; then
- GROFF=$4 # sh cmd line, including options
-fi
-
-if test ! -d $SRCDIR../bin/docs/manpages; then
- echo "No manpages present. Development version maybe?"
- exit 0
-fi
-
-# Get the configured feature set
-test -f "${SRCDIR}/config.log" && \
- eval `grep "^[[:alnum:]]*=.*" "${SRCDIR}/config.log" |
- grep -v ^MANDIR | grep -v ^SRCDIR`
-
-for lang in $langs; do
- if [ "X$lang" = XC ]; then
- echo Installing default man pages in $MANDIR/
- lang=.
- else
- echo Installing \"$lang\" man pages in $MANDIR/lang/$lang
- fi
-
- langdir=$MANDIR/$lang
- for d in $MANDIR $langdir $langdir/man1 $langdir/man5 $langdir/man7 $langdir/man8; do
- if [ ! -d $d ]; then
- mkdir $d
- if [ ! -d $d ]; then
- echo Failed to make directory $d, does $USER have privileges?
- exit 1
- fi
- fi
- done
-
- for sect in 1 5 7 8 ; do
- for m in $langdir/man$sect ; do
- for s in $SRCDIR../bin/docs/manpages/$lang/*$sect; do
- MP_BASENAME=`basename $s`
-
- # Check if this man page if required by the configured feature set
- case "${MP_BASENAME}" in
- smbsh.1) test -z "${SMBWRAPPER}" && continue ;;
- *) ;;
- esac
-
- FNAME="$m/${MP_BASENAME}"
-
- # Test for writability. Involves
- # blowing away existing files.
-
- if (rm -f $FNAME && touch $FNAME); then
- if [ "x$GROFF" = x ] ; then
- cp $s $m # Copy raw nroff
- else
- echo "\t$FNAME" # groff'ing can be slow, give the user
- # a warm fuzzy.
- $GROFF $s > $FNAME # Process nroff, because man(1) (on
- # this system) doesn't .
- fi
- chmod 0644 $FNAME
- else
- echo Cannot create $FNAME... does $USER have privileges?
- fi
- done
- done
- done
-done
-cat << EOF
-======================================================================
-The man pages have been installed. You may uninstall them using the command
-the command "make uninstallman" or make "uninstall" to uninstall binaries,
-man pages and shell scripts.
-======================================================================
-EOF
-
-exit 0
-
+++ /dev/null
-#!/bin/sh
-
-DESTDIR=$1
-LOCALEDIR=`echo $2 | sed 's/\/\//\//g'`
-SRCDIR=$3/
-MSGFMT=msgfmt
-
-case $0 in
- *uninstall*)
- if test ! -d "$DESTDIR/$LOCALEDIR"; then
- echo "Directory $DESTDIR/$LOCALEDIR doesn't exist!"
- echo "Do a \"make installmo\" or \"make install\" first."
- exit 1
- fi
- mode='uninstall'
- ;;
- *)
- mode='install'
- ;;
-esac
-
-for dir in $SRCDIR/locale/*; do
- MODULE=`basename $dir`
- for f in $SRCDIR/locale/$MODULE/*.po; do
- BASE=`basename $f`
- LANGUAGE=`echo $BASE | sed 's/\.po//g'`
- if test "$LANGUAGE" = '*'; then
- echo "No .po file exists!"
- exit 0
- fi
- FNAME="$DESTDIR/$LOCALEDIR/$LANGUAGE/LC_MESSAGES/$MODULE.mo"
- if test ! -d "$DESTDIR/$LOCALEDIR/$LANGUAGE/LC_MESSAGES/"; then
- mkdir -p "$DESTDIR/$LOCALEDIR/$LANGUAGE/LC_MESSAGES/"
- fi
- if test "$mode" = 'install'; then
- echo "Installing $f as $FNAME"
- touch "$FNAME"
- $MSGFMT -f -o "$FNAME" "$f"
- if test ! -f "$FNAME"; then
- echo "Cannot install $FNAME. Does $USER have privileges?"
- exit 1
- fi
- chmod 0644 "$FNAME"
- elif test "$mode" = 'uninstall'; then
- echo "removing $FNAME"
- rm -f "$FNAME"
- if test -f "$FNAME"; then
- echo "Cannot remove $FNAME. Does $USER have privileges?"
- exit 1
- fi
- else
- echo "Unknown mode $mode. script called as $0."
- exit 1
- fi
- done
- if test "$mode" = 'install'; then
- cat << EOF
-==============================================================
-MO files for $MODULE are installed.
-==============================================================
-EOF
- else
- cat << EOF
-==============================================================
-MO files for $MODULE are removed.
-==============================================================
-EOF
- fi
-done
-
-if test "$mode" = 'install'; then
- cat << EOF
-==============================================================
-All MO files for Samba are installed. You can use "make uninstall"
-or "make uninstallmo" to remove them.
-==============================================================
-EOF
-else
- cat << EOF
-==============================================================
-All MO files for Samba are removed. you can use "make install"
-or "make installmo" to install them.
-==============================================================
-EOF
-fi
-
-exit 0
+++ /dev/null
-#!/bin/sh
-
-INSTALLPERMS=$1
-DESTDIR=$2
-prefix=`echo $3 | sed 's/\/\//\//g'`
-LIBDIR=`echo $4 | sed 's/\/\//\//g'`
-shift
-shift
-shift
-shift
-
-for d in $prefix $LIBDIR; do
-if [ ! -d $DESTDIR/$d ]; then
-mkdir $DESTDIR/$d
-if [ ! -d $DESTDIR/$d ]; then
- echo Failed to make directory $DESTDIR/$d
- exit 1
-fi
-fi
-done
-
-# We expect the last component of LIBDIR to be the module type, eg. idmap,
-# pdb. By stripping this from the installation name, you can have multiple
-# modules of the same name but different types by creating eg. idmap_foo
-# and pdb_foo. This makes the most sense for idmap and pdb module, where
-# they need to be consistent.
-mtype=`basename $LIBDIR`
-
-for p in $*; do
- p2=`basename $p`
- name=`echo $p2 | sed -es/${mtype}_//`
- echo Preserving old module as $DESTDIR/$LIBDIR/$name.old
- if [ -f $DESTDIR/$LIBDIR/$name ]; then
- rm -f $DESTDIR/$LIBDIR/$name.old
- mv $DESTDIR/$LIBDIR/$name $DESTDIR/$LIBDIR/$name.old
- fi
- echo Installing $p as $DESTDIR/$LIBDIR/$name
- cp -f $p $DESTDIR/$LIBDIR/$name
- chmod $INSTALLPERMS $DESTDIR/$LIBDIR/$name
-done
-
-exit 0
+++ /dev/null
-#!/bin/sh
-# this script courtesy of James_K._Foote.PARC@xerox.com
-# 5 July 96 Dan.Shearer@UniSA.Edu.Au Don't hardcode script names, get from Make
-
-INSTALLPERMS=$1
-BINDIR=`echo $2 | sed 's/\/\//\//g'`
-
-shift
-shift
-
-echo Installing scripts in $BINDIR
-
-for d in $BINDIR; do
- if [ ! -d $d ]; then
- mkdir $d
- if [ ! -d $d ]; then
- echo Failed to make directory $d
- echo Have you run installbin first?
- exit 1
- fi
- fi
-done
-
-for p in $*; do
- p2=`basename $p`
- echo Installing $BINDIR/$p2
- if [ -f $BINDIR/$p2 ]; then
- rm -f $BINDIR/$p2.old
- mv $BINDIR/$p2 $BINDIR/$p2.old
- fi
- cp $p $BINDIR/
- chmod $INSTALLPERMS $BINDIR/$p2
- if [ ! -f $BINDIR/$p2 ]; then
- echo Cannot copy $p2... does $USER have privileges?
- fi
-done
-
-cat << EOF
-======================================================================
-The scripts have been installed. You may uninstall them using
-the command "make uninstallscripts" or "make install" to install binaries,
-man pages and shell scripts. You may recover the previous version (if any
-by "make revert".
-======================================================================
-EOF
-
-exit 0
git.samba.org / obnox / samba / samba-obnox.git / commitdiff